Search Results

Search found 2053 results on 83 pages for 'signal'.

Page 42/83 | < Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >

• Creating Shared Wifi Connection on Windows 7 WITHOUT wep/wpa security?

  - by Duncan

  Ok, for some reason I just can't figure this out on Windows 7. Never had an issue with it on Windows XP, never tried in Vista. I realize that I need to create an Ad-Hoc setup which I can do. However I can't get it to share the wireless signal on my laptop. Even if I go into the adapter settings. I need (well, want) to connect my old Psion netBook to my home network and due to the wireless card, I can't have any form of security. Thanks in advance!

  Read the article

• X-FI optical output not being recognized.

  - by Luciano

  Hello there! I have an issue and I don't know what to do! I have a SoundBlaster X-FI Xtreme Gamer, which has a spdif mini-optical output. I have it connected to a home theater, via a toslink cable and an adapter to fit in the mini plug. It used to work perfectly, but now it doesn't anymore. There is light travelling through the cable, but the HT doesn't pick up the signal. The sound card of the motherboard also has an optical output (regular, not mini) and it works ok, so the cable and the HT are fine, I think. What else should I try? Thanks, Luciano. PS: I only enabled the onboard card for testing, but usually it's disabled to avoid any kind of conflicts. PPS: I'm using Windows 7 64bit with latest drivers of everything, but like I said. It used to work.

  Read the article

• Intermittent connection issues with atheros ar9285

  - by MrStatic

  I have an asus K50IJ which has an atheros ar9285 wifi chip. It has decided to start to randomly drop internet. Although the card doesn't seem to notice it has. It will show full signal instead of say 3 bars. I tried to look at the atheros site for the latest driver but they don't even offer driver downloads. I then checked the asus site and it doesn't even list that card in the downloads for this laptop. I run Windows 7 64bit. It will drop either every minute or once a day while I am doing intensive bandwidth usage and when I am just idling.

  Read the article

• Why do strace/truss sometimes 'fix' stuck processes?

  - by Emmel

  Sometimes you have a stuck process that's been stuck for a while, and as soon as you go to poke at it with strace/truss just to see what's going on, it gets magically unstuck and continues to run! So from merely 'observing' these programs have some impact in the running of the stuck programs .. what's happening here? Did strace (I guess via ptrace(2)?) send a signal, causing the program to cease blocking, or such? I've seen this several times -- most recently on Linux RHEL 4 (and a Perl script mucking with processes and doing some network IO in that case), but in a few other contexts as well. Unfortunately, I can't reproduce this, as it times to happen ... in times of crisis. But my curiosity remains. :-) Any elucidation appreciated.

  Read the article

• What all laptops can replace a compaq presario v2000's monitor ?

  - by Nishant

  I am planning to buy laptop for parts/repair from Ebay to replace by broken LCD of Compaq presario v2000 . I know the monitor is 14" WXGA and LTNW140-l01 model made by samsung . I have removed the LCD panel and I can see 2 cables , one power and other video signal Can I buy a 14.1" LAPTOP and fit to this ? 14.1 WXGA seems very common . Please can any one tell which all laptops can replace this monitor ? I know HP DV 1000 does ? Any advices would be great .

  Read the article

• What decent audio recording interfaces are well supported in Windows 7 64bit?

  - by labradort

  I currently have an Audigy 2 ZS Platinum. It permits me to insert a 1/4" jack line from bass guitar and play along with pre-recorded piano music. This worked fine under Windows XP. I am moving to Windows 7 64 bit (dual boot for now), and Creative may not develop fully working drivers for this component. Looking around, I don't see Windows 7 support mentioned at product web sites from E-MU, Roland, M-Audio, etc. Even at Creative, the posting of available drivers for Windows 7 is deceptive, as they do not adequately support recording (latency, distortion). My local music store shrugs and says to stay with Win XP. In some cases, the Vista drivers will work in Win 7. So I need real world feedback on this. I should also mention I'm not impressed with available USB interfaces - they have too low of a signal to noise ratio for my purposes. That leaves PCI, or possibly firewire devices (never tried one yet).

  Read the article

• Security and Windows Login

  - by Mimisbrunnr

  I'm not entirely sure this is the right place for the is question but I cannot think of another so here goes. In order to login to the windows machines at my office one must press the almighty CTRL-ALT-DELETE command combo first. I, finding this very frustrating, decided to look into why and found claims from both my sys and Microsoft stating that it's a security feature and that "Because only windows could read the CTRL-ALT-DELETE it helped to ensure that an automated program cannot log in. Now I'm not a master of the windows operating system ( as I generally use *nix ) but I cannot believe that "Only windows can send that signal" bull. It just doesn't sit right. Is there a good reason for the CTRL-ALT-DELETE to login thing? is it something I'm missing? or is it another example of antiquated legacy security measures?

  Read the article

• Wi-Fi connected but can't go to any site

  - by Michael Dy

  My Windows 7 laptop can connect to our Wi-Fi signal, I can sign in on Yahoo! Messenger, but I can't go to any site. I can access the Net on other devices. The issue started a few weeks ago, so I've been troubleshooting since then in vain. There's no virus, and I already used System Restore. In Wireless Network Connection Status, the received activity is greater than the sent activity. I turned off Windows Firewall and still no Net access. My ping tests: How do I fix this?

  Read the article

• 3.5mm headphone jack -> Component video?

  - by Isaac Waller

  Hello, I have a strange cord that has a male 3.5mm headphone jack on one side, and some component video and audio ouputs on the other. When I plug the headphone side into my computer, and the other side into my TV, I get audio across the cable, but no video. How can I send some video over the headphone jack in OS X? I know you can, because this cable is actually for a Beyblade toy and it somehow transferred video over this cable. Thanks, Isaac I think I found some more information (from Wikipedia:) "A four conductor version (of a 3.5mm headphone jack) is becoming a de facto standard output connector for compact camcorders, providing stereo sound plus a video signal." So how can I do this on Mac?

  Read the article

• Monitoring and terminating a hanged process in Linux

  - by Yoav

  Hi, I'm writing a script that runs many simultaneous processes that run the "dig" command. Once in a while (relatively rare, but happens in every run since I run dig many times) the dig command hangs with 0% CPU. Therefore, my script never terminates. I've created a monitor process for each dig command I run, which terminates it after a while, but I was wondering if there isn't a simpler and more efficient way to run a process with a pre-determined "expiration date", i.e. if the process runs more then X seconds it gets a signal that terminates it. Thanks!

  Read the article

• iPhone Cannot log into WiFi suddenly [closed]

  - by Stanley

  I suddenly get into this strange problem. My iPhone has been using the WiFi setup at my home for more than a year. Suddenly it cannot connect to the internet despite still having the full WiFi signal icon. Have an older iPhone 3 GS and it can still browse the net using the same WiFi. So the wireless router should be working. When I check the non-functioning iPhone, it has the "Router" and the "DNS" entries blank while the functioning iPhone has entries on both of the fields. Also the subnet Mask are different. Please help.

  Read the article

• Apache proxy is modifying the HTTP status code

  - by jarnbjo

  I am using Apache as a proxy frontend for a Java web application, which is deployed on WebSphere. The web application is using custom status codes (55x) to signal specific errors to the clients. When accessing the web application directly through the WebSphere HTTP listener, everything works as expected, but when these requests are proxied through an Apache load balancer, the status codes are modified by Apache and replaced with a generic 500 error code (internal server error). In Apache's access.log, the correct status code is logged: <IP> - - [11/Nov/2011:17:24:53 +0100] "POST <URL> HTTP/1.1" 551 36 But the actual response received by the client starts like this (logged with tcpdump): HTTP/1.1 500 Internal Server Error ... Followed by the real status code in the response content: ... Error 551: Berichteter Fehler: 551 ... Is there an obvious reason for this behaviour or does someone have a suggestion on how to modify the Apache configuration to forward the "real" status code instead of 500?

  Read the article

• Random flickering on 2.6.32 kernels after suspend

  - by whitequark

  I have XUbuntu 9.10 installed on a Toshiba NB200 netbook with Intel video card that's handled with i915 driver. With 2.6.31 stable, recommended kernel everything but WiFi works fine: Atheros ath9k WiFi shows too small signal power and loses packets in 'bursts' sometimes. With 2.6.32-* (I tested -9 to -11 from Ubuntu's kernel unstable ppa) everything works fine just prior to first suspend: echo mem >/sys/power/state. After it random unidentified fullscreen 'one-frame' flickering begins in Xorg, and after a couple of minutes everything eventually hangs while showing filled grey (not white; it is like default button colour) screen; no X keys are working: Ctrl+Alt+Fn don't, blind typing in console too. Magic SysRq still works and I was able to reboot. Also there is one out-of-tree kernel module called omnibook that is required to turn on WiFi and Bluetooth. Any advices?

  Read the article

• How to have supervisord follows the new unicorn process after USR2 rolling restart?

  - by ybart

  I have configured supervisord to track my unicorn server process. When I send USR2 process, this performs a rolling restart. After this operation the old unicorn master have restarted and then changed PID. This caused supervisor to lose track of the unicorn process considering it as EXITED. How can I have supervisord to follow the new unicorn process after this operation ? Unicorn has a PID file available, but I have not found an option in supervisord configuration for this. An other option would be to have supervisord to send itself the USR2 signal, but I don't know how to perform this and whether it will prevent my problem from occurring.

  Read the article

• Nvidia Ion HDMI output problems with Acer Revo

  - by Techfeeler

  I bought an Acer Revo. First I connected it to my Sony TV via HDMI output. For a few days it worked very well. Then one day when switching on the computer, it boots and the TV screen turns black and the TV displays the error message "no input signal". I connected the Revo to a Samsung LED TV, and it did the same. What do you guys think the problem is? How do I tackle this issue? Any help is deeply appreciated.

  Read the article

• How do I configure an ordinary TV remote control to work with lirc on Linux?

  - by Allan Lewis

  I am running MythTV on Ubuntu 9.10 and I would like to use a TV remote to control it. I know that lirc needs a configuration file for the remote, but none of my remotes is in the official database. If I point a remote at the receiver on my TV card (a Pinnacle PCTV "Solo", model 72e) and press a button, dmesg logs the code generated by the remote, so I assume I just have to make a config file with a list of commands assigned to these codes. I've read a few how-tos but I still don't understand exactly how to create the config file. Some of the guides I've read refer to IR receivers on TV cards working at a "higher level of abstraction", which I take to mean that they decode the signal and provide a code, like the ones I can see in dmesg, rather than just giving raw data, but none of them explain where to go from there! Any help would be greatly appreciated!

  Read the article

• How do you test if a PCI slot is working - motherboard diagnostic software?

  - by Adam

  I suspect that my motherboard is bad, and that my PCI-E slot is not working. I have a Gigabyte motherboard that had a Hauppage 2250 working fine in the PCI-E slot for many months. However - recently - would not get TV channels that I used to get --- until finally Media center cant detect any channels at all. Got a new tuner card (ATI 350 card) - cant detect any channels. The cable signal is good - I have it connected directly to a TV - all channels come in clear. SO that is why I suspect a motherboard problem. Are there any motherboard diagnostic scanner utilities that can verify I need a new motherboard

  Read the article

• Debian 5 server is randomly shutting down.

  - by revofreak

  My debian 5 vps is suffering from random shutdowns. I reinstalled it several times, the hosts moved me to a different physical box, check the install image and said everyone else also uses it and is fine. Heres the output from syslog Mar 27 00:19:19 noobintraining-1 -- MARK -- Mar 27 00:32:01 noobintraining-1 shutdown[18142]: shutting down for system halt Mar 27 00:32:06 noobintraining-1 init: Switching to runlevel: 0 Mar 27 00:32:06 noobintraining-1 xinetd[15907]: Exiting... Mar 27 00:32:07 noobintraining-1 named[15865]: received control channel command 'stop -p' Mar 27 00:32:07 noobintraining-1 named[15865]: shutting down: flushing changes Mar 27 00:32:07 noobintraining-1 named[15865]: stopping command channel on 127.0.0.1#953 Mar 27 00:32:07 noobintraining-1 named[15865]: stopping command channel on ::1#953 Mar 27 00:32:07 noobintraining-1 named[15865]: no longer listening on ::#53 Mar 27 00:32:07 noobintraining-1 named[15865]: no longer listening on 127.0.0.1#53 Mar 27 00:32:07 noobintraining-1 named[15865]: no longer listening on 89.238.172.132#53 Mar 27 00:32:07 noobintraining-1 named[15865]: exiting Mar 27 00:32:07 noobintraining-1 exiting on signal 15 Any help is most appreciated!

  Read the article

• Video issues with old server running Boxee

  - by Skaughty

  I have a old Dell Power Edge 1650 1U rackmount server running Windows XP. Dual 1.3 ghz Processors and 1 GB of RAM. I would like to run Boxee on it, but the 8mb integrated video card will not support it. The font within Boxee just comes up as blocks of color. I have a PCI Radion R9000 dual out video card. However when I plug it in I can not get video signal on any of the VGA outs. Is it possible to upgrade the video card on this old of a server, or is it possible to make it work with the older integrated video?

  Read the article

• Wake on Lan/Wan won't work after some time has passsed

  - by Vian Esterhuizen

  I have the following set up: Gigabyte Z77X-UD5H Wake On Lan Enabled Asus N66U Port Forwarding Static IP assigned to my computer Windows 7 Advanced Power Management - PCI Express - Off Intel 82579V - All options under Power Management checked I'm trying to set this up for Wake on Wan capabilities. If I shut down my computer and immediately try to Wake on Wan (and Lan) it works and starts up. While the computer is on, I've used a few WOL specific packet sniffers and the packet comes through on the correct port. After any period of time over a few minutes, waking on Wan or Lan won't work. The back "activity" light is blinking on my ethernet port on my computer, as well as on the router, so I would assume the network card is on and able to receive a signal. Any ideas? Suggestions? What can I do to troubleshoot the problem?

  Read the article

• DokuWiki Segmentation Fault On Radius Auth

  - by mrduclaw

  I'm running x64 Ubuntu 12.04. I did a simple apt-get install dokuwiki to install DokuWiki. And I'm trying to follow the directions located here: http://www.dokuwiki.org/auth:radius to get Radius authentication working. Things seemed to install OK. Under Configuration Manager I selected Authentication backend to be "Radius" and filled in the Radius details at the bottom. Now, however, whenever I try to log into the Wiki, my browser gives me the following error: No data received I checked /var/log/apache2/error.log and see this: [Tue Jul 10 22:22:14 2012] [notice] child pid 5270 exit signal Segmentation fault (11) I'm fairly sure the Radius server is setup correctly as it correctly authenticates with my squid proxy and other stuff on the network. But this is about the extent of my Linux troubleshooting skills. Can anyone suggest steps for me to follow to help track down what's causing apache2 to segfault short of attaching with gdb and issuing a set follow-fork-mode? I'm also open to just hearing suggestions for simila

  Read the article

• Multicasting and multicast address

  - by Zia ur Rahman

  I have confusion about the multicast addresses, I have read an example which is given by. Suppose two applications have been built to send audio over a network. One application accepts and digitizes an audio input stream, and then sends the resulting frame across the network to other application. The second application receives the digitized audio from the network, converts it back to the audio signal and plays the result over a speaker. Unless the two applications use broadcast to send frames, no other computers on the network will receive a copy of the frame. Multicasting provides an excellent solution to the problems of allowing some computers to participate in audio transmission. To use multicasting , a multicast address must be chosen for the audio application. And the receiving application passes the multicast address to the network interface. The interface begins to accept the packets sent to that address. Question: how this multicast address is chosen, how the receiving application knows that the sender using this specific destination address for the audio frames.

  Read the article

• Why is my ipad's wireless so flakey?

  - by Mark

  I'm the proud owner of a new IPad here in the UK. All is good, except for the wifi, which is a bit flakey. It connects fine to my Draytek router which is set for WPA/WPA2 and 56g only, displaying full signal strength. Then, after a few minutes, it goes down to minimum strength... And sometimes it goes back up again. A few times, it seems to loose connection completely, and needs to be turned off and on again. I've looked at the Apple support site, and have tried their recommendations (which are not really very relevant), but still nothing. I've tried setting the router to wpa2 only, and setting long-preamble. Right now, I guess I want to know if it's a hardware problem with my device and should be returned, or if it's a problem with all ipads which will be resolved. Guess I could take it back to the Mac genius bar, but I find those guys so incredibly pretentious and, frankly, rather useless, that i'd rather wait until I've exercised other options!

  Read the article

• Redirect output of Python program to /dev/null

  - by STM

  I have a Python executable, written and compiled by somebody else, that I simply need to run once halfway down my own bash script. The program uses a text-based UI, therefore waits for input before proceeding, but the key operations it performs when starting are required in my bash script. A messy (and strange) procedure I know, but unfortunately I haven't got any other options. I've gotten around forcefully closing the program with a kill signal, but the program's TUI insists on outputting to wherever it's run. I've tried redirecting both stdout and stderr to /dev/null and running the program in the background by suffixing an ampersand, but simply can't get it to play ball. I believe the cause is the program spawns other processes, and the output redirection of the parent process doesn't affect them. Is there any trick I can utilise to redirect all output from child processes too?

  Read the article

• Postfix TLS issue

  - by HTF

  I'm trying to enable TLS on Postfix but the daemon is crashing: Sep 16 16:00:38 core postfix/master[1689]: warning: process /usr/libexec/postfix/smtpd pid 1694 killed by signal 11 Sep 16 16:00:38 core postfix/master[1689]: warning: /usr/libexec/postfix/smtpd: bad command startup -- throttling CentOS 6.3 x86_64 # postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases broken_sasl_auth_clients = yes command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix data_directory = /var/lib/postfix debug_peer_level = 2 disable_vrfy_command = yes home_mailbox = Maildir/ html_directory = no inet_interfaces = all inet_protocols = all local_recipient_maps = mail_owner = postfix mailbox_command = mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man mydestination = $myhostname, localhost.$mydomain, localhost mydomain = domain.com myhostname = mail.domain.com mynetworks = 127.0.0.0/8 myorigin = $mydomain newaliases_path = /usr/bin/newaliases.postfix queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.6.6/README_FILES relay_domains = sample_directory = /usr/share/doc/postfix-2.6.6/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop smtp_tls_note_starttls_offer = yes smtp_tls_session_cache_database = btree:/var/lib/postfix/smtpd_tls_cache.db smtp_use_tls = yes smtpd_delay_reject = yes smtpd_error_sleep_time = 1s smtpd_hard_error_limit = 20 smtpd_helo_required = yes smtpd_helo_restrictions = permit_mynetworks, reject_non_fqdn_hostname, reject_invalid_hostname, permit smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_pipelining, reject_non_fqdn_recipient, reject_unknown_recipient_domain, reject_invalid_hostname, reject_non_fqdn_hostname, reject_non_fqdn_sender, reject_unknown_sender_domain, reject_unauth_destination reject_rbl_client cbl.abuseat.org, reject_rbl_client bl.spamcop.net, permit smtpd_sasl_auth_enable = yes smtpd_sasl_local_domain = $myhostname smtpd_sasl_path = private/auth smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot smtpd_sender_restrictions = permit_mynetworks, reject_non_fqdn_sender, reject_unknown_sender_domain, permit smtpd_soft_error_limit = 10 smtpd_tls_CAfile = /etc/postfix/ssl/cacert.pem smtpd_tls_cert_file = /etc/postfix/ssl/smtpd.crt smtpd_tls_key_file = /etc/postfix/ssl/smtpd.key smtpd_tls_loglevel = 1 smtpd_tls_received_header = yes smtpd_tls_session_cache_timeout = 3600s smtpd_use_tls = yes tls_random_source = dev:/dev/urandom unknown_local_recipient_reject_code = 550

  Read the article

< Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >