Search Results

Search found 2827 results on 114 pages for 'suggestion'.

Page 42/114 | < Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >

• Cannot use scp on Mac OS X

  - by Robert

  Hi all, when I try to copy any file with scp on Mac OS X Snow Leopard from another machine I get this error: scp [email protected]:/home/me/file.zip . Password: ... ---> Couldn't open /dev/null: Permission denied this is the output of "ls -l /dev/null": crw-rw-rw- 1 root wheel 3, 2 May 14 14:10 /dev/null I am in the group wheel, and even if I do "sudo scp..." it doesn't work. It's driving me crazy, do you have any suggestion? Thanx!

  Read the article

• DHCPOFFER delay VLAN

  - by john883

  I have configured two VLANs [ 15 and 16 ] and a trunkport on a Cisco Catalyst 2960. The trunkport is connected to eth2 on a Linux server The server is configured to support VLAN's and the interfaces eth2.15 eth2.16 is configured with ip addresses on two different subnet. dhcp3-server is running on the same server and hands out IP-addresses to the VLANs. When connecting a client to a port that is configured in ex. VLAN 15 and requesting a IP-address, i experience a long delay before recieving a DHCPOFFER, around 30 seconds or so, the client needs to send a DHCPDISCOVER about five times but will always recieve a DHCPOFFER. Any suggestion why this delay is happening?

  Read the article

• something is downloading in background Linux

  - by wisdom

  My laptop boots normally to Linux -LinuxMint- and immediately I like to open gnome-system-monitor but the shock is that something is downloading(the problem has been out 2 days ago) and nothing I run yet ! I did iftop in terminal but nothing strange -a screen shot provided-, also I tried nethogs which showed nothing at all. The more complicated when I reboot and same problem is there so I can't browse/surf Internet, no one connected to my network can browse any more it's absorbing the stream horribly! After many reboots it will go to normal state(no background downloading). But really I can't figure out the problem going behind the scene ! Any suggestion,any help would be appreciated...thanks

  Read the article

• Is there any way to search within OneNote 2007 attachments

  - by jtolle

  I'm starting to use OneNote (2007) more. One thing I'd like to do is take notes on papers I have read. That is, I attach, say, a PDF file, and then type in some notes about it. Sometimes I do other stuff like copy some key text or figures from the paper, so OneNote is great for this because all that plus my own notes plus the file itself can all be in one place. However, the OneNote search doesn't seem to be able to search within said PDF files. Windows search finds things, but just in the OneNote cache, not the actual Onenote .one files. (Presumably that will only work for recently accessed stuff, and in any case doesn't take me to my actual notes.) Is there a way to do what I want? If not, does anyone have a suggestion (or link) as to how to best use OneNote to store (and later search for!) this kind of content and notes?

  Read the article

• CentOS Live CD Creation issues

  - by Dheeraj

  I am creating my customized CentOS 6.3 Live CD. I am following information given at https://projects.centos.org/trac/livecd/wiki/GetToolset My "livecd-creator" command completes successfully and an ISO image is created. But when I try to boot up my system with this ISO, it goes up to the CentOS blue screen and then the CAPS lock and Scroll Lock LEDs on the keyboard starts flashing. Then from here after, the system takes no input from keyboard and I have to power cycle it and it does the same thing. Could you get me any suggestion why this is causing and possible workaround. Thanks.

  Read the article

• How to store etckeeper repositories on a central server via git

  - by andreash

  Hello, I would like to have one central git repository for all my servers' etckeeper .git repos. Here the suggestion was to use a file in /etc/etckeeper/commit.d, which basically looks like this, assuming that a git repo had been set up in somedir on somehost: #!/bin/sh cd /etc git push faruser@farhost:somedir The problem with this is, that it would be really nice to have all servers in the same repo on the central server. I tried git push faruser@farhost:somedir/server1 but that failed. As you can see, I've never worked with git before ... Any ideas on how this can be accomplished is greatly appreciated :) Cheers, Andreas

  Read the article

• SVN help:: svn: invalid option: --trust-server-cert

  - by JP19

  Hi, I want to bypass certificate checking. I tried using svn --trust-server-cert update, but I get an error, svn: invalid option: --trust-server-cert. I am on ubuntu and the svn version is 1.5.4. Is there any other way to bypass the certificate? Ubuntu won't automatically update my svn to 1.6.xx, which I think has this option. (In any case, I have heard that 1.6.xx has compatibility problems with some apache modules so is not fully safe to install?). Anyone with a suggestion? Thanks JP

  Read the article

• Migrating Printers from XP to 7 (using USMT 4.0)

  - by Luís Mendes

  I'm attempting to migrate a user from an XP machine to a 7 machine, using USMT 4.0 (User State Migration Tool, from Microsoft). For some reason the migration of printers isn't working, and none of the topics at Microsoft's TechNet are helping me out. I'll list the topics, just for the record: http://social.technet.microsoft.com/Forums/en-US/w7itproinstall/thread/ab8d6d70-9d1b-419c-8149-37387d4eba6d http://social.technet.microsoft.com/Forums/en-US/w7itproinstall/thread/e92d9ce9-ad9f-4ba0-b326-c7ae6dc50a58 There was a suggestion to use a customized XML configuration file, to force the migration printers, but it didn't work as well. They also mention a folder named DIManifests, which has to be present in the USMT directory. I've tried everything, but with no success. Can anyone please help me sort this one out? Apparently it's a bug, but there's gotta be some workaround. Thank you!

  Read the article

• Unresponsive virtual OS

  - by confusedGeek

  Hopefully someone has a suggestion on how to resolve this. Configuration Host: Win 2003R2 w/Virtual Server 2005R2 Virtual1: Win 2003R2 w/Sql Server 2005 Virtual2: Win 2003R2 w/WSS 3.0 Situation This past weekend the power went out and took down the servers (no UPS, it's a desktop standing in as dev testing server). Since the servers went down the Virtual2 server after running WSS fairly heavily for an hour to two will become unresponsive via HTTP. If I login via virtual server's remote control I don't get anything beyond a background screen. The CPU counter on the virtual server's master status shows that it isn't doing anything. The only thing I have been able to do is to turn off Virtual2, which loses any state changes. Shutdown commands issue from the virtual server master status are ignored. After restarting Virtual2 the event logs and application logs don't indicate what caused the problem. Anyone have an idea as to how to repair the OS, or maybe what could be the problem? Thanks ahead of time.

  Read the article

• Do I need a license to create pdf files? [closed]

  - by Fire-Dragon-DoL

  I hope this is the correct place where I could ask this question. My mother is an accountant with a degree in economics. She works as a freelancer and she needs some licenses for her job. The biggest problem is adobe acrobat standard, which costs 400€, quite a lot. I want understand if she must buy it to create pdf files or she can use some free (even for commercial use) programs that she has because of her job (the chamber of commerce provide some advantages to accountants). She is actually using PDFCreator, which as I can read is free for business usage (open source also!!): http://sourceforge.net/projects/pdfcreator/ Thanks for any suggestion

  Read the article

• How to forward blocked ports by ISP

  - by KiDo

  So I've been trying to setup a TeamSpeak 3 server on my pc but ports (9987,10011,30033) are blocked by my ISP, I've contacted them to unblock them but they didn't accept, and it's the fastest ISP in my city (as living in a 3rd world country) so it's not a good idea to connect to another ISP. The thing is, I've tried Your-Freedom to connect to tunnel my connection & SocksCap. The problem is, when TS works with SocksCap it doesn't show a WAN-IP that friends will use to connect to my server It says "Needs to be Requested" and when I press the Request button, I get nothing. So, any idea what's wrong if someone has done this before? or if you have any other suggestion to run a TS server, would be very glad to hear it and really appreciate that. P.S. as I've mentioned before, living in a 3rd world country, makes me unable to buy a VPS even the cheapest one cause there's no Visa, Credit, or paypal. so that won't work. Thanks in advance.

  Read the article

• DNS configuration for external/internal resolution

  - by FerranB

  HI, We have an internal web server which is available through Internet and from local network. The server is located in the local network. The current configuration is the following: To access through Internet you use http://webexample.com To access through Local Network you use http://myweb The main problem is that the local users cannot share links with external users. Thats a problem for us. I want to setup the following configuration: All users (local and Internet) access through http://webexample.com The local DNS server resolves http://webexample.com to the local Network IP (i.e 192.168.2.100) Any other suggestion? Which is the best way to override http://webexample.com resolution in Windows Server? It can be done on DNS server or it have to be done in hosts file?

  Read the article

• Odd internet packet routing

  - by NachoChip

  I want to know is there anyway to explicitly control the packet routing. I try to connect my computer in HK from San Francisco. It is extremely slow and I use tracert to see what is going on. It seems the packet get routed from HK to Europe and then to New York and then to San Francisco. In US, I am using Astound Cable. Is there any suggestion I can force the packet to not go around the world before it reach my computer? Or it is all ISP dependent?

  Read the article

• Tuning OpenVZ Containers to work better with Java?

  - by Daniel

  I have a 8 GB RAM Server (Dedicated) and currently have KVM Virtual Machines running on there (successfully) however i'm considering moving to OpenVZ as KVM seems a bit overkill with a lot of overhead for what i use it for. In the past i have used OpenVZ Containers, hosted by myself and from other providers and Java doesn't seem to work well with them.. One example is that if i give a container 2 GB RAM ( No burst) (with or without vswap doesn't matter) a java instance can only be tuned to use at very most 1500 MB of that RAM (-Xmx, -Xms). Ideally, i wish to be able to create "Mini" containers with about 256MB, 512MB, 768 RAM and run some java instances in them. My question is: I'm trying to find an ideal way to tune a OpenVZ container configuration to work better with Java memory. Please, don't suggest anything related to Java settings, i'm looking for OpenVZ specific answers.. Though i welcome any suggestion if you feel it may help me. Much Appreciated, Daniel

  Read the article

• Re-downloading accidentally deleted podcasts in iTunes

  - by Matt

  I deleted some previously deleted podcast episodes in iTunes 9 and I'd like to re-download them. (I don't want to manually re-download them because then they won't show up in the podcast's list in the iTunes Podcast section.) I've read http://blog.krisgielen.be/archives/54 as well as Way to get old podcasts in iTunes where the suggestion is to delete the iTunes entries for the podcasts I'd like to recover, then hold shift while re-opening that podcast's little triangle icon. Here's the problem though: holding shift and re-opening the triangle tells iTunes to refresh the RSS feed, and it's possible that the RSS feed no longer contains the item you want. What I'm really looking for is a means of getting the "Get" button (that normally appears on un-downloaded podcasts) to reappear on the episodes I've previously downloaded but deleted.

  Read the article

• Sync Music to External Hard Drive with Windows Media Player

  - by dtbarne

  I'd like to sync my music from my internal hard drive to an external hard drive. Windows Media Player doesn't recognize my USB external hard drive as a syncable device. If I plug in any USB flash drive, it shows up as a device, but I can't seem to get it to recognize my external hard drive. Per some googling suggestions, the only suggestion I came across was to try enabling the "Portable Device Enumerator" service, but that yielded no luck. Is there any way to sync my music from WMP to an external hard drive?

  Read the article

• Incremental backup and sync software

  - by martjno

  I need a free software for Windows (with gui or command line) that does incremental backup copying all files and storing changed or deleted files in a directory named like last change date (or a progressive number). To be more precise: D:\ is my Data drive E:\ is my Backupdrive. If i want to backup all my data from D:\: E:\d_lastbackup\ will contain a plain copy of all the files and folder content (no compression or archiving, same files attributes) of D E:\d_20090822\ will contain all files (with their full path) that are changed or deleted in the last version (since the previous one) E:\d_20090820\ will contain all files (with their full path) that are changed or deleted in the last version (since the previous one) and so on... I had a software working prefectly with an old USB harddsik by Maxtor, but it works only on that device. Any suggestion?

  Read the article

• Need to use wusa to stop endless rebooting on R2

  - by Jack

  I installed 3 updates, which after rebooting resulted in a reboot loop, never going past the "configuring your computer for windows" stage. Last known good configuration, safe mode etc make no difference (as expected). I have no system restore images available. I used dism to uninstall one of the updates, but the other two appear to be MSP patches, and so I cannot use dism to uninstall them. From what I have been reading it appears I must use wusa, however wusa does not seem to be included in WinRE. Does anyone have a suggestion of how I can access wusa to uninstall these updates, and hopefully reverse this problem?

  Read the article

• Email server for huge number of subscriber

  - by bogha

  My question is that my company is thinking of providing a free email account for each of its customers. As a new company we will assume that our corporate email system will be MS Exchange server which will support about 1000 employees. They are asking why not adding the customer list to be a part of Exchange users. My suggestion was to separate the two systems, for the corporate we can use Exchange but for customers (around 30000) we have to use a Linux based system. My only argument was that Linux can be used for enterprise services like this and Microsoft may fail. What do you suggest? And if you are with me on choosing Linux as the server platform, what do you suggest to use as an alternative for Exchange in Linux? Thank you.

  Read the article

• Areca 1880ix RAID hangs

  - by Dave

  Areca RAID controller ARC-1880ix-12 (firmware 1.50) hangs when on high load. My setup is: Chenbro 3U chassis Intel S5500BC mainboard Xeon 5603 CPU 16GB of RAM 12 Seagate SAS drives ST32000645SS (2 of them as hot spare, 10 as RAID10) Mellanox Infiniband HBA card This server is working as external infiniband storage for Xen VMs. When load is quite big Areca's firmware hangs - it becomes unreachable even from Areca's ethernet adapter. After resetting the server power it returns to normal operation. While Areca is hanged I can confirm that it is powered (ethernet link is active) and Infiniband HBA works Ok. Thanks in advance for any idea or suggestion where the problem might be!

  Read the article

• how to stop a driver from running - it self protected and rootkit hidden

  - by Aristos

  I have this serous problem For the first time I can not stop a program from running. Something is on one laptop computer that is run as system legacy driver, and self protected and hidden on service as rootkit. Anything I try to remove fails. When a program or anti toolkit try to remove the hidden registry setting for make it stop I get this error : "a device attached to the system is not functioning" So any idea that can help me stop it from running, or even delete it on start up ? My one limitation is that the hard drive is on a laptop and I can not remove it and attact it to somewhere else. This program not let me, touch the registry, do not let me touch the file, do not let me touch the file, The move on boot fail to delete it, the rootrepeal fail to delete it, the rootkiet reveal from sysinternals fail to reveal it ! everything fails. Do how have any experience on this, or do you have any suggestion how to stop this driver from run ?

  Read the article

• Hiding Files in Windows

  - by frbry

  Hello, Currently, I'm developing a system which will extract some files from an SFX archive (files that will be used for another app). I want to make the extracted files hidden, so the person which has find the location of the exe couldn't get the files which will be in same directory with the exe. I know i can apply attrib +h to the files but if the user turns on "show hidden and system files" option in Windows, the files will be visible. Isn't there any method to overcome this? Any suggestion is welcomed. Thanks.

  Read the article

• Address VMWare Fusion Linux guest by hostname?

  - by amrox

  I have a Ubuntu Server 9.04 image set up in VMWare Fusion 3.0.0, using the NAT option for the guest's network connection. From the Mac host, I can ssh to the linux guest just fine using it's IP address, but I would like to be able to refer to it by hostname for connivence. ie: mac-host:~ ssh [email protected] I had a similar setup using Parallels a couple years ago, but I don't remember how it was set up. It may have "just worked". Any suggestion on how to make this work?

  Read the article

• How to make google Chrome omnibar search sites permanent?

  - by tim

  In google Chrome, when you have visited a site, say wikipedia.com, your can thereafter search the site directly from the omnibar by typing in a few letters then hitting tab. However, I noticed that after I clear my cache, Chrome does not remember the search autofills, and I once again have to visit the site manually for it to take effect. Is there a way to make the omnibar searches permanent even after doing a full cache clear in google Chrome? Thanks. Update: I tried the suggestion below, but bookmarking the site just allowed me to autocomplete the address. It did not allow me the option to hit tab to do the search directly in the omnibar. Any suggestions?

  Read the article

• How to kill all screens that has been up longer then 3 weeks?

  - by Darkmage

  Im creating a script that i am executing every night at 03.00 that will kill all screens that has been running longer than 3 weeks. anyone done anything similar that can help? If you got a script or suggestion to a better method please help by posting :) I was thinking maybe somthing like this. First do a dump to textfile ps -U username -ef | grep SCREEN dump.txt then do a loop running through all lines of dump.txt with a regex and putting pid of the prosseses with STIME 3weeksago in a array. then do a kill loop on the array result.

  Read the article

< Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >