Search Results

Search found 30087 results on 1204 pages for 'default package'.

Page 420/1204 | < Previous Page | 416 417 418 419 420 421 422 423 424 425 426 427  | Next Page >

• Can't access shared drive when connecting over VPN

  - by evolvd

  I can ping all network devices but it doesn't seem that DNS is resolving their hostnames. ipconfig/ all is showing that I am pointing to the correct dns server. I can "ping "dnsname"" and it will resolve but it wont resolve any other names. Split tunnel is set up so outside DNS is resolving fine So one issue might be DNS but I have the IP address of the server share so I figure I could just get to it that way. example: \10.0.0.1\ well I can't get to it that way either and I get "the specified network name is no longer available" I can ping it but I can't open the share. Below is the ASA config : ASA Version 8.2(1) ! hostname KG-ASA domain-name example.com names ! interface Vlan1 nameif inside security-level 100 ip address 10.0.0.253 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address dhcp setroute ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive clock timezone EST -5 clock summer-time EDT recurring dns domain-lookup outside dns server-group DefaultDNS name-server 10.0.0.101 domain-name blah.com access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 10000 access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 8333 access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 902 access-list SPLIT-TUNNEL-VPN standard permit 10.0.0.0 255.0.0.0 access-list NONAT extended permit ip 10.0.0.0 255.255.255.0 10.0.1.0 255.255.255.0 pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool IPSECVPN-POOL 10.0.1.2-10.0.1.50 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-621.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list NONAT nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface 10000 10.0.0.101 10000 netmask 255.255.255.255 static (inside,outside) tcp interface 8333 10.0.0.101 8333 netmask 255.255.255.255 static (inside,outside) tcp interface 902 10.0.0.101 902 netmask 255.255.255.255 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa authentication enable console LOCAL aaa authentication http console LOCAL aaa authentication serial console LOCAL aaa authentication ssh console LOCAL aaa authentication telnet console LOCAL http server enable http 10.0.0.0 255.255.0.0 inside http 0.0.0.0 0.0.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set myset esp-aes esp-sha-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map dynmap 1 set transform-set myset crypto dynamic-map dynmap 1 set reverse-route crypto map IPSEC-MAP 65535 ipsec-isakmp dynamic dynmap crypto map IPSEC-MAP interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp policy 65535 authentication pre-share encryption aes hash sha group 2 lifetime 86400 telnet 0.0.0.0 0.0.0.0 inside telnet timeout 5 ssh 0.0.0.0 0.0.0.0 inside ssh 70.60.228.0 255.255.255.0 outside ssh 74.102.150.0 255.255.254.0 outside ssh 74.122.164.0 255.255.252.0 outside ssh timeout 5 console timeout 0 dhcpd dns 10.0.0.101 dhcpd lease 7200 dhcpd domain blah.com ! dhcpd address 10.0.0.110-10.0.0.170 inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept ntp server 63.111.165.21 webvpn enable outside svc image disk0:/anyconnect-win-2.4.1012-k9.pkg 1 svc enable group-policy EASYVPN internal group-policy EASYVPN attributes dns-server value 10.0.0.101 vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn split-tunnel-policy tunnelspecified split-tunnel-network-list value SPLIT-TUNNEL-VPN ! tunnel-group client type remote-access tunnel-group client general-attributes address-pool (inside) IPSECVPN-POOL address-pool IPSECVPN-POOL default-group-policy EASYVPN dhcp-server 10.0.0.253 tunnel-group client ipsec-attributes pre-shared-key * tunnel-group CLIENTVPN type ipsec-l2l tunnel-group CLIENTVPN ipsec-attributes pre-shared-key * ! class-map inspection_default match default-inspection-traffic ! ! policy-map global_policy class inspection_default inspect icmp ! service-policy global_policy global prompt hostname context I'm not sure where I should go next with troubleshooting nslookup result: Default Server: blahname.blah.lan Address: 10.0.0.101

  Read the article

• how to make audio and video streaming servers work?

  - by explorex

  I am a php mysql developer ... just an (below) average. and i am interested in the way television and radio are broadcasted over internet live. i want to know how it works and and what are its requirements (which package of which programming language offers the best). i must admit that i am a complete layman but i expect it do by next half month or year or so. And please clarify me Websites are stored in servers. From my desktop, i want to broadcast some video, then i need to connect to webserver(to upstream the video). Is there an application to do that (or do i have to code that or embed in my web application and which programming language would be suitable(does python support that))? and i also need a script to handle the upstreamed video or audio(can i do that with php)?

  Read the article

• rt73.bin for Ubuntu 12.04 LTS?

  - by fNek

  I have a D-Link USB WLAN stick and want to install Ubuntu 12.04 alternate. The installer asks me to insert an exchangable drive containing 'rt73.bin', the driver. I cannot find any binary downloads, but cannot build the package, because I have no other linux PC. What can I do? //EDIT: The reason why I want to do this during setup is that I want to setup an LTSP server. I only found guides that assume one has Internet connection - but I have not. What can I do?

  Read the article

• How to download kde or gnome from synaptic for offline installation

  - by Arin Chakraborty

  I know how to install GNOME 3 and KDE using apt-get. But i want to know how to, only download, from synaptic package manager, these shells. When i search for kubuntu-desktop in synaptic then the download file shows nearly 4MB but i clearly remember the actual size was near 100 mb. Just for information both are already installed in my laptop. So the question is - How to download the actuall 100 mb KUbuNTU-DESKTOP so that i can just, without any hesitation install it in offline computer which is using ubuntu 12.04. Same for the GNOME 3. Please help me out !

  Read the article

• Help error in terminal

  - by devin

  Hi I just updated my ubuntu to the latest and on package manager it told me all my gnome packages were broken and i couldn't make any updates until i deleted the gnomes. i had no idea that would screw me. anyways i logged out now i cant login anymore. it flashes right back to the login screen. and it looks very downgraded. anywho, i have no idea how to fix it, ive been looking online for a while. and everytime i try to remove or add anything, upgrade. i get this error.errors were encountered while processing: E: Sub-process /usr/bin/dpkg returned an error code (1) so confused

  Read the article

• Cool projects at Codeplex

  - by Tiago Salgado

  There’s a significant number of useful projects at Codeplex who were meeting with some of our needs. As such, here are two that already have been useful to me: Droid Explorer As the name implies, allows us to explore an Android device and has features such as: Copy local files to device Reboot device Reboot device in to recovery mode Open files for viewing / execution locally with the default file type executable Package Manager (Install & Uninstall) Take a Screen Shot (landscape or portrait) etc Virtual Router – Wifi Hot Spot (Windows 7 / 2008 R2) Allows you to create an Access Point, sharing your local Internet connection, with other wireless devices. Its no doubt an application to be always installed, by the simple way to create a resource like this one.

  Read the article

• How can I share my python scripts with my less python-savvy business person partner?

  - by Alex

  I'm taking financial mathematics as an elective, and I'm working with real life finance industry worker type people. It's actually kind of fun. When I pulled out a macbook at one of our meetings, I had four lifelong windows users look at me like I had three heads. Anyway, I'm helping with design and simulation of our trading strategy, and I wrote a little thing using matplotlib to visualize historical stock data. However, these guys don't know how to use git, or install python, or deal with path-related package management things. I need to be able to send my scripts to them to use, and I need to do it with absolutely minimal effort on their part. I was thinking something on the lines of py2exe, but I'd like to hear some advice before I go ahead.

  Read the article

• ATI catalyst and additional drivers have vanishe d after update (8/9/2012)

  - by Obada Talal Abu Arisheh

  ok, I have my ATI Radeon 2400XT working properly for longtime on ubuntus (8.04 - 12.04) and recently when I was trying to update (it installs kernal 3.2.0-31 during that update) every think related to ATI including property drivers (that can be activated from additional drivers) are vanished so AMD catalyst control center is not working (it says no amd graphics card is installed) and when opening [additional drivers] it loads and then a box is appear saying (Downloading package indexes failed, please check your network status. Most drivers will not be available.) after searching for additional drivers the window appear saying (no property driver are used on this system). I don't know what happened really! I don't know how to fix this problem either. help!!

  Read the article

• Is it risky to install KDE on Ubuntu alongside Unity and Gnome?

  - by Vagrant232

  The last time I installed KDE and Gnome on the same OS (Opensuse 12.1), GDM and KDM started conflicting and they both stopped working properly and I was plagued with applications from both environments till the point the applications overview in gnome was flooded with useless KDE trash. Moreover, I still had parts of the KDE desktop appearing when I'm running Gnome (such as the password manager and kde fonts and some apps refused to give up the oxygen theme). If I install the plasma-desktop package on Ubuntu, am I at risk of having such issues? I just want KDE with the bare minimum number of applications; just the necessary ones to make things work. I'd rather not have dolphin installed either. Also, is it all right to install the kde-standard pack? Or should I just stick to the plasma-desktop pack?

  Read the article

• Is it possible to use Google Analytics to track file downloads?

  - by Eric Falsken

  It's always bothered me that Google Analytics (and similar embedded web traffic monitoring services) can only see a reflection of the traffic going to my server and can only see page visits since it depends on the browser executing a Javascript snippet. If I want to track real downloads of a software package (ZIP file), there's no way Google Analytics can possibly tell me that because its javascript can't be attached to a ZIP file. Is there a way I can upload my log files to Google so that the pointy-haired boss can see downloads of our ZIP/PDF/BIN files and not just visits to the download page?

  Read the article

• Few GUI problems with minimal install

  - by Toki Tahmid

  I installed a minimal Ubuntu with a complete functional GUI, but facing a few problems. nm-applet's icon won't show in the notification area, but I can connect to wired internet fine. I am not able to configure my wireless or VPN this way. gksu's authentication screen is different from the usual graphical authentication - the screen turns gray as usual, but there are more options like save password for this session or keyring. And most importantly, it won't accept my password no matter what. And lastly, Gwibber seems to install no matter what, but there's not a single package in my knowledge that I installed has anything related to Gwibber. I would welcome any help regarding these three issues. I did not mention what packages I installed, because the list is long, but I will do so if anyone requests. Thank you in advance!

  Read the article

• Why UFW has to be (re)started at boot time if it's only iptables rule manager?

  - by Tomasz Zielinski

  README from source package says: When installing ufw from source, you will also need to integrate it into your boot process for the firewall to start when you restart your system. Depending on your needs, this can be as simple as adding the following to a startup script (eg rc.local for systems that use it): # /lib/ufw/ufw-init start For systems that use SysV initscripts, an example script is provided in doc/initscript.example. See doc/upstart.example for an Upstart example. Consult your distribution's documentation for the proper way to modify your boot process. On my system I have this: # /etc/ufw/ufw.conf # # Set to yes to start on boot. If setting this remotely, be sure to add a rule # to allow your remote connection before starting ufw. Eg: 'ufw allow 22/tcp' ENABLED=yes So, why does simple iptables rule manager need to be started at boot time? Is there any secret to that, or it merely checks if all rules are in place ?

  Read the article

• LibreOffice Math problem with greek letters

  - by Matheus de Araújo

  I've a problem with my LibreOffice. Using an old archive that I have (with the Maxwell's equations), the greek letters are like squares. I tried to change something in the alphabet but even the font don't have any greek letters (they appear like squares too), both Greek and iGreek letters package. Sounds like a packet that isn't installed or corrupted, but I still redownloaded and reinstalled the LO and I don't know whose I have to install. With the OO my equations worked well (I made the file with it). What am I supposed to do?

  Read the article

• Error in my Separating Axis Theorem collision code

  - by Holly

  The only collision experience i've had was with simple rectangles, i wanted to find something that would allow me to define polygonal areas for collision and have been trying to make sense of SAT using these two links Though i'm a bit iffy with the math for the most part i feel like i understand the theory! Except my implementation somewhere down the line must be off as: (excuse the hideous font) As mentioned above i have defined a CollisionPolygon class where most of my theory is implemented and then have a helper class called Vect which was meant to be for Vectors but has also been used to contain a vertex given that both just have two float values. I've tried stepping through the function and inspecting the values to solve things but given so many axes and vectors and new math to work out as i go i'm struggling to find the erroneous calculation(s) and would really appreciate any help. Apologies if this is not suitable as a question! CollisionPolygon.java: package biz.hireholly.gameplay; import android.graphics.Canvas; import android.graphics.Color; import android.graphics.Paint; import biz.hireholly.gameplay.Types.Vect; public class CollisionPolygon { Paint paint; private Vect[] vertices; private Vect[] separationAxes; int x; int y; CollisionPolygon(Vect[] vertices){ this.vertices = vertices; //compute edges and separations axes separationAxes = new Vect[vertices.length]; for (int i = 0; i < vertices.length; i++) { // get the current vertex Vect p1 = vertices[i]; // get the next vertex Vect p2 = vertices[i + 1 == vertices.length ? 0 : i + 1]; // subtract the two to get the edge vector Vect edge = p1.subtract(p2); // get either perpendicular vector Vect normal = edge.perp(); // the perp method is just (x, y) => (-y, x) or (y, -x) separationAxes[i] = normal; } paint = new Paint(); paint.setColor(Color.RED); } public void draw(Canvas c, int xPos, int yPos){ for (int i = 0; i < vertices.length; i++) { Vect v1 = vertices[i]; Vect v2 = vertices[i + 1 == vertices.length ? 0 : i + 1]; c.drawLine( xPos + v1.x, yPos + v1.y, xPos + v2.x, yPos + v2.y, paint); } } public void update(int xPos, int yPos){ x = xPos; y = yPos; } /* consider changing to a static function */ public boolean intersects(CollisionPolygon p){ // loop over this polygons separation exes for (Vect axis : separationAxes) { // project both shapes onto the axis Vect p1 = this.minMaxProjection(axis); Vect p2 = p.minMaxProjection(axis); // do the projections overlap? if (!p1.overlap(p2)) { // then we can guarantee that the shapes do not overlap return false; } } // loop over the other polygons separation axes Vect[] sepAxesOther = p.getSeparationAxes(); for (Vect axis : sepAxesOther) { // project both shapes onto the axis Vect p1 = this.minMaxProjection(axis); Vect p2 = p.minMaxProjection(axis); // do the projections overlap? if (!p1.overlap(p2)) { // then we can guarantee that the shapes do not overlap return false; } } // if we get here then we know that every axis had overlap on it // so we can guarantee an intersection return true; } /* Note projections wont actually be acurate if the axes aren't normalised * but that's not necessary since we just need a boolean return from our * intersects not a Minimum Translation Vector. */ private Vect minMaxProjection(Vect axis) { float min = axis.dot(new Vect(vertices[0].x+x, vertices[0].y+y)); float max = min; for (int i = 1; i < vertices.length; i++) { float p = axis.dot(new Vect(vertices[i].x+x, vertices[i].y+y)); if (p < min) { min = p; } else if (p > max) { max = p; } } Vect minMaxProj = new Vect(min, max); return minMaxProj; } public Vect[] getSeparationAxes() { return separationAxes; } public Vect[] getVertices() { return vertices; } } Vect.java: package biz.hireholly.gameplay.Types; /* NOTE: Can also be used to hold vertices! Projections, coordinates ect */ public class Vect{ public float x; public float y; public Vect(float x, float y){ this.x = x; this.y = y; } public Vect perp() { return new Vect(-y, x); } public Vect subtract(Vect other) { return new Vect(x - other.x, y - other.y); } public boolean overlap(Vect other) { if(y > other.x && other.y > x){ return true; } return false; } /* used specifically for my SAT implementation which i'm figuring out as i go, * references for later.. * http://www.gamedev.net/page/resources/_/technical/game-programming/2d-rotated-rectangle-collision-r2604 * http://www.codezealot.org/archives/55 */ public float scalarDotProjection(Vect other) { //multiplier = dot product / length^2 float multiplier = dot(other) / (x*x + y*y); //to get the x/y of the projection vector multiply by x/y of axis float projX = multiplier * x; float projY = multiplier * y; //we want to return the dot product of the projection, it's meaningless but useful in our SAT case return dot(new Vect(projX,projY)); } public float dot(Vect other){ return (other.x*x + other.y*y); } }

  Read the article

• Did You Know? More online seminars!

  - by Kalen Delaney

  I am in Tucson again, having just recorded two more online workshops to be broadcast by SSWUG. We haven't set the dates yet, but we are thinking about offering a special package deal for the two of them. The topics really are related and I think they would work well together. They are both on aspects of Query Processing. The first was on how to interpret Query Plans and is an introduction to the topic. However, it only includes a discussion of how SQL Server actually processes your queries. For example,...(read more)

  Read the article

• Issues while trying to install Xsane

  - by Sebastian

  :) I am sort of new in the world of Linux. I installed Zorin OS and I am very happy with it. My only problem is that I would like to be able to use my scanner. My Kodak printer works fine, but the scanner is not detected; therefore, I am trying to install Xsane. The issue remains, every time that I try to install it, and error message comes up saying; "Package dependencies cannot be resolved" What can I do? thanks!

  Read the article

• Can't get Broadcom 43142 drivers to work after installation on 5420 Inspiron

  - by beckett

  I'm a complete newbie to ubuntu, I've already installed and reinstalled the Broadcom driver required done a numerous amount of steps on terminal but I can't seem to get wireless working. However, my wired connection seems to work just fine. also I have tried to follow the instructions but get stuck at step number 2 when i get told "No package dpkg is available": 1) Download the file from the link 2) sudo yum install dpkg 3) mkdir BCM43142 4) dpkg-deb -x Downloads/wireless-bcm43142-dkms-6.20.55.19_amd64.deb BCM43142 5) cd BCM43142/usr/src/wireless-bcm43142-oneiric-dkms-6.20.55.19~bdcom0602.0400.1000.0400/src/wl/sys 6) sudo yum install kernel-devel kernel-headers 7) vi wl_linux.c 8) around line 43, remove the line include 9) save the file (:wq) 10) cd ../../.. 11) make Things should work, and you'll have a file called "wl.ko" in the current directory. 12) sudo yum remove broadcom-wl 13) sudo mkdir -p /lib/modules/3.5.2-3.fc17.x86_64/extra/wl 14) sudo cp wl.ko /lib/modules/3.5.2-3.fc17.x86_64/extra/wl 15) sudo depmod -a 16) sudo modprobe wl I really need help :/

  Read the article

• Greek Letters rendered incorrectly in LibreOffice

  - by Matheus de Araújo

  Using an old archive that I have (with Maxwell's equations), the Greek letters display as squares. I tried to change something in the alphabet but even the fonts don't have any Greek letters (they appear like squares too), both Greek and iGreek letters packages. Sounds like a package that's not installed, or corrupted. I still re-downloaded and reinstalled LibreOffice. I don't know what I have to install. The equations look fine in OpenOffice.org (I made the file with it). What should I do?

  Read the article

• Oracle IRM Desktop update

  - by martin.abrahams

  Just in time for Christmas, we have made a fresh IRM Desktop build available with a number of valuable enhancements: Office 2010 support Adobe Reader X support Enhanced compatibility with SharePoint Ability to enable the Sealed Email for Lotus Notes integration during IRM Desktop installation The kit is currently available as a patch that you can access by logging in to My Oracle Support and looking for patch 9165540. The patch enables you to download a package containing all 27 language variants of the IRM Desktop. We will be making the kit available from OTN as soon as possible, at which time you will be able to pick a particular language if preferred.

  Read the article

• A command-line clipboard copy and paste utility?

  - by Peter.O

  In Windows I used command-line clipboard copy-and-paste utilities... pclip.exe and gclip.exe These were UnixUtils ports for Windows (but they only handled plain text). There were a couple of other native Windows utils which could write/extracy any format. I've looked for something similar in Synaptic Package Manager, but I can't find anything. Is there something there, that I've missed? ... or maybe this is available in bash scripting? The type of utility I'd like will be able to read/write via std-in/std-out or file-in/file-out, and handle Unicode/Rich-text/Picture/etc clipboard formats... Late Edit: NB: I'm not after a clipboard manager.

  Read the article

• Skipping intermediate Ubuntu OS upgrade to latest one,How do I upgrade from 9.04 to 10.04.2?

  - by Yadnesh

  I'm currently runing Ubuntu 9.04 Jaunty. I want to upgrade to 10.04.02, but whenever I use the Update manager to do this, it fails with the error "An upgrade from 'jaunty' to 'lucid' is not supported with this tool". I also tried to run sudo do-release-upgrade -d, but it fails with the same error message: Checking for a new ubuntu release Done Upgrade tool signature Done Upgrade tool Done downloading extracting 'lucid.tar.gz' authenticate 'lucid.tar.gz' against 'lucid.tar.gz.gpg' tar: Removing leading `/' from member names Reading cache Checking package manager Can not upgrade An upgrade from 'jaunty' to 'lucid' is not supported with this tool.

  Read the article

• SSIS Design Pattern: Producing a Footer Row

  - by andyleonard

  The following is an excerpt from SSIS Design Patterns (now available in the UK!) Chapter 7, Flat File Source Patterns. The only planned appearance of all five authors presenting on SSIS Design Patterns is the SSIS Design Patterns day-long pre-conference session at the PASS Summit 2012 . Register today . Let’s look at producing a footer row and adding it to the data file. For this pattern, we will leverage project and package parameters. We will also leverage the Parent-Child pattern, which will be...(read more)

  Read the article

• SAP vs Other Technologies

  - by Bunny Rabbit

  I am a fresher just out of collge .Till now i have worked on java,Python,javascript,groovy,django,JS, JQuery and web application develop has been my only intrest. I have been working for an IT company for past three months and it involves working with an erp package SAP and i am working on ABAP. Coming from a world of ORM and languages like python ,SAP and database tables doen't excite me much. With all the development being happening around HTML 5 and android etc i feel quite left out and bored in SAP . can you guys suggest me a proper way forward ?

  Read the article

• Does apt-cacher Change Packages `Access Time`?

  - by tAmir Naghizadeh

  I tried to remove the long time unused packages from apt-cacher archive using find: 1. $find /var/cache/apt-cacher -atime +5 -type f -name ".*deb*" | wc -l 8471 2. $find /var/cache/apt-cacher -atime +9 -type f -name ".*deb*" | wc -l 2269 3. $find /var/cache/apt-cacher -atime +10 -type f -name ".*deb*" | wc -l 0 Can I depend on the Access Time for apt-cacher archive usage? That is, does Access Time change only when package get received by the user? (we are apt-cacher for more than 6 months).

  Read the article

• Help with Kodak esp 3250 printer driver on Lubuntu 12.1 SOLVED!

  - by user108608

  First my system: pentium 4 -don't remember the speed-, 1g ram, dual boot to separate physical drives, Fdos and Lubuntu 12.1 second my lan: I have four computers operating for the same printer. 1. Intel quad core i5, 4g ram, running Windoze 7 64 bit, printer connected and shared from here. Kodak ESP 3250 2. Gateway 17" laptop running Windoze 7 32bit 3. Asus tablet (small laptop) running Lumbutu 12.1 4. My dual boot system running Fdos and Lubuntu 12.1 The problem: I downloaded c2esp_25c-1_i386.deb, tried to install it using DEBI Package Installer, it loads the files, looks for cups driver and ends with an error: "Dependancy is not satisfiable: libcupsdriver1 (=1.4.0)" What do I do now? Is there some place that I can get the correct cups driver? further information: The Asus tablet was running Ubuntu 12.1 (very slowly and with a few crashes) and could print from the lan printer with no problems. Is there something in Ubuntu that can be loaded into Lubuntu? noobee user hoping for answers, Paul

  Read the article

< Previous Page | 416 417 418 419 420 421 422 423 424 425 426 427  | Next Page >