enable add ons - Page 420

C++/msvc6 application crashes due to heap corruption, any hints?

- by David Alfonso

Hello all, let me say first that I'm writing this question after months of trying to find out the root of a crash happening in our application. I'll try to detail as much as possible what I've already found out about it. About the application It runs on Windows XP Professional SP2. It's built with Microsoft Visual C++ 6.0 with Service Pack 6. It's MFC based. It uses several external dlls (e.g. Xerces, ZLib or ACE). It has high performance requirements. It does a lot of network and hard disk I/O, but it's also cpu intensive. It has an exception handling mechanism which generates a minidump when an unhandled exception occurs. Facts about the crash It only happens on multiprocessor/multicore machines and under heavy loads of work. It happens at random (neither we nor our client have found a pattern yet). We cannot reproduce the crash on our testing lab. It only happens on some production systems (but always in multicore machines) It always ends up crashing at the same point, although the complete stack is not always the same. Let me add the stack of the crashing thread (obtained using WinDbg, sorry we don't have symbols) ChildEBP RetAddr Args to Child WARNING: Stack unwind information not available. Following frames may be wrong. 030af6c8 7c9206eb 77bfc3c9 01a80000 00224bc3 MyApplication+0x2a85b9 030af960 7c91e9c0 7c92901b 00000ab4 00000000 ntdll!RtlAllocateHeap+0xeac (FPO: [Non-Fpo]) 030af98c 7c9205c8 00000001 00000000 00000000 ntdll!ZwWaitForSingleObject+0xc (FPO: [3,0,0]) 030af9c0 7c920551 01a80898 7c92056d 313adfb0 ntdll!RtlpFreeToHeapLookaside+0x22 (FPO: [2,0,4]) 030afa8c 4ba3ae96 000307da 00130005 00040012 ntdll!RtlFreeHeap+0x1e9 (FPO: [Non-Fpo]) 030afacc 77bfc2e3 0214e384 3087c8d8 02151030 0x4ba3ae96 030afb00 7c91e306 7c80bfc1 00000948 00000001 msvcrt!free+0xc8 (FPO: [Non-Fpo]) 030afb20 0042965b 030afcc0 0214d780 02151218 ntdll!ZwReleaseSemaphore+0xc (FPO: [3,0,0]) 030afb7c 7c9206eb 02e6c471 02ea0000 00000008 MyApplication+0x2965b 030afe60 7c9205c8 02151248 030aff38 7c920551 ntdll!RtlAllocateHeap+0xeac (FPO: [Non-Fpo]) 030afe74 7c92056d 0210bfb8 02151250 02151250 ntdll!RtlpFreeToHeapLookaside+0x22 (FPO: [2,0,4]) 030aff38 77bfc2de 01a80000 00000000 77bfc2e3 ntdll!RtlFreeHeap+0x647 (FPO: [Non-Fpo]) 7c92056d c5ffffff ce7c94be ff7c94be 00ffffff msvcrt!free+0xc3 (FPO: [Non-Fpo]) 7c920575 ff7c94be 00ffffff 12000000 907c94be 0xc5ffffff 7c920579 00ffffff 12000000 907c94be 90909090 0xff7c94be *** WARNING: Unable to verify checksum for xerces-c_2_7.dll *** ERROR: Symbol file could not be found. Defaulted to export symbols for xerces-c_2_7.dll - 7c92057d 12000000 907c94be 90909090 8b55ff8b MyApplication+0xbfffff 7c920581 907c94be 90909090 8b55ff8b 08458bec xerces_c_2_7 7c920585 90909090 8b55ff8b 08458bec 04408b66 0x907c94be 7c920589 8b55ff8b 08458bec 04408b66 0004c25d 0x90909090 7c92058d 08458bec 04408b66 0004c25d 90909090 0x8b55ff8b The address MyApplication+0x2a85b9 corresponds to a call to erase() of a std::list. What I have tried so far Reviewing all the code related to the point where the crash ends happening. Trying to enable pageheap on our testing lab though nothing useful has been found by now. We have substituted the std::list for a C array and then it crashes in other part of the code (although it is related code, it's not in the code where the old list resided). Coincidentally, now it crashes in another erase, though this time of a std::multiset. Let me copy the stack contained in the dump: ntdll.dll!_RtlpCoalesceFreeBlocks@16() + 0x124e bytes ntdll.dll!_RtlFreeHeap@12() + 0x91f bytes msvcrt.dll!_free() + 0xc3 bytes MyApplication.exe!006a4fda() [Frames below may be incorrect and/or missing, no symbols loaded for MyApplication.exe] MyApplication.exe!0069f305() ntdll.dll!_NtFreeVirtualMemory@16() + 0xc bytes ntdll.dll!_RtlpSecMemFreeVirtualMemory@16() + 0x1b bytes ntdll.dll!_ZwWaitForSingleObject@12() + 0xc bytes ntdll.dll!_RtlpFreeToHeapLookaside@8() + 0x26 bytes ntdll.dll!_RtlFreeHeap@12() + 0x114 bytes msvcrt.dll!_free() + 0xc3 bytes c5ffffff() Possible solutions (that I'm aware of) which cannot be applied "Migrate the application to a newer compiler": We are working on this but It's not a solution at the moment. "Enable pageheap (normal or full)": We can't enable pageheap on production machines as this affects performance heavily. I think that's all I remember now, if I have forgotten something I'll add it asap. If you can give me some hint or propose some possible solution, don't hesitate to answer! Thank you in advance for your time and advice.

Read the article

Form gets submitted Multiple times

- by rasika vijay

While clicking inside the form , the form automatically tried to resubmit , I cannot figure out which part of the code causes it to behave like this . In the createTable function , a table is created after the domain is given . But I am unable to select any of the controls in the output . I have attached the jsfiddle code link here : http://jsfiddle.net/rasikaceg/S7kWM/ function createTable() { document.getElementById("table_container").innerHTML = ""; var input_domain = document.forms["form1"]["DomainName"].value; if (input_domain == null || input_domain == "") return; var table = document.createElement("table"), tablehead = document.createElement("thead"), theadrow = document.createElement("tr"), th1 = document.createElement("th"), th2 = document.createElement("th"), th3 = document.createElement("th"), th4 = document.createElement("th"); th1.appendChild(document.createTextNode("Website")); th2.appendChild(document.createTextNode("Enable/Disable Live Update for LM and CBD")); th3.appendChild(document.createTextNode("From Date")); th4.appendChild(document.createTextNode("To Date")); theadrow.appendChild(th1); theadrow.appendChild(th2); theadrow.appendChild(th3); theadrow.appendChild(th4); tablehead.appendChild(theadrow); table.appendChild(tablehead); var names = ["website1", "website2"]; var container = document.getElementById("table_container"); var tablebody = document.createElement("tbody"); for (var i = 0, len = names.length; i < len; ++i) { var row = document.createElement("tr"), column1 = document.createElement("td"), column2 = document.createElement("td"), column3 = document.createElement("td"), column4 = document.createElement("td"), checkbox = document.createElement('input'); checkbox.type = "checkbox"; checkbox.name = names[i]; checkbox.value = names[i]; checkbox.id = names[i]; var label = document.createElement('label') label.htmlFor = names[i]; label.appendChild(document.createTextNode(names[i])); column1.appendChild(checkbox); column1.appendChild(label); var dropdown = document.createElement("select"); dropdown.name = names[i] + "_select"; var op1 = new Option(); op1.value = "enable"; op1.text = "enable"; var op2 = new Option(); op2.value = "disable"; op2.text = "disable"; dropdown.options.add(op1); dropdown.options.add(op2); column2.appendChild(dropdown); var datetime_from = document.createElement('input'); datetime_from.type = "datetime-local"; datetime_from.name = names[i] + "_from"; column3.appendChild(datetime_from); var datetime_to = document.createElement('input'); datetime_to.type = "datetime-local"; datetime_to.name = names[i] + "_to"; column4.appendChild(datetime_to); row.appendChild(column1); row.appendChild(column2); row.appendChild(column3); row.appendChild(column4); tablebody.appendChild(row); } table.appendChild(tablebody); document.getElementById("table_container").appendChild(table); }

Read the article

jqgrid with asp.net webmethod and json working with sorting, paging, searching and LINQ

- by aimlessWonderer

THIS WORKS! Most topics covering jqgrid and asp.net seem to relate to just receiving JSON, or working in the MVC framework, or utilizing other handlers or web services... but not many dealt with actually passing parameters back to an actual webmethod in the codebehind. Furthermore, scarce are the examples that contain successful implementation the AJAX paging, sorting, or searching along with LINQ to SQL for asp.net jqGrid. Below is a working example that may help others who need help to pass parameters to jqGrid in order to have correct paging, sorting, filtering.. it uses pieces from here and there... ================================================== First, THE JAVASCRIPT <script type="text/javascript"> $(document).ready(function() { var grid = $("#list"); $("#list").jqGrid({ // setup custom parameter names to pass to server prmNames: { search: "isSearch", nd: null, rows: "numRows", page: "page", sort: "sortField", order: "sortOrder" }, // add by default to avoid webmethod parameter conflicts postData: { searchString: '', searchField: '', searchOper: '' }, // setup ajax call to webmethod datatype: function(postdata) { mtype: "GET", $.ajax({ url: 'PageName.aspx/getGridData', type: "POST", contentType: "application/json; charset=utf-8", data: JSON.stringify(postdata), dataType: "json", success: function(data, st) { if (st == "success") { var grid = jQuery("#list")[0]; grid.addJSONData(JSON.parse(data.d)); } }, error: function() { alert("Error with AJAX callback"); } }); }, // this is what jqGrid is looking for in json callback jsonReader: { root: "rows", page: "page", total: "totalpages", records: "totalrecords", cell: "cell", id: "id", //index of the column with the PK in it userdata: "userdata", repeatitems: true }, colNames: ['Id', 'First Name', 'Last Name'], colModel: [ { name: 'id', index: 'id', width: 55, search: false }, { name: 'fname', index: 'fname', width: 200, searchoptions: { sopt: ['eq', 'ne', 'cn']} }, { name: 'lname', index: 'lname', width: 200, searchoptions: { sopt: ['eq', 'ne', 'cn']} } ], rowNum: 10, rowList: [10, 20, 30], pager: jQuery("#pager"), sortname: "fname", sortorder: "asc", viewrecords: true, caption: "Grid Title Here" }).jqGrid('navGrid', '#pager', { edit: false, add: false, del: false }, {}, // default settings for edit {}, // add {}, // delete { closeOnEscape: true, closeAfterSearch: true}, //search {} ) }); </script> ================================================== Second, THE C# WEBMETHOD [WebMethod] public static string getGridData(int? numRows, int? page, string sortField, string sortOrder, bool isSearch, string searchField, string searchString, string searchOper) { string result = null; MyDataContext db = null; try { //--- retrieve the data db = new MyDataContext("my connection string path"); var query = from u in db.TBL_USERs select u; //--- determine if this is a search filter if (isSearch) { searchOper = getOperator(searchOper); // need to associate correct operator to value sent from jqGrid string whereClause = String.Format("{0} {1} {2}", searchField, searchOper, "@" + searchField); //--- associate value to field parameter Dictionary<string, object> param = new Dictionary<string, object>(); param.Add("@" + searchField, searchString); query = query.Where(whereClause, new object[1] { param }); } //--- setup calculations int pageIndex = page ?? 1; //--- current page int pageSize = numRows ?? 10; //--- number of rows to show per page int totalRecords = query.Count(); //--- number of total items from query int totalPages = (int)Math.Ceiling((decimal)totalRecords / (decimal)pageSize); //--- number of pages //--- filter dataset for paging and sorting IQueryable<TBL_USER> orderedRecords = query.OrderBy(sortfield); IEnumerable<TBL_USER> sortedRecords = orderedRecords.ToList(); if (sortorder == "desc") sortedRecords= sortedRecords.Reverse(); sortedRecords= sortedRecords .Skip((pageIndex - 1) * pageSize) //--- page the data .Take(pageSize); //--- format json var jsonData = new { totalpages = totalPages, //--- number of pages page = pageIndex, //--- current page totalrecords = totalRecords, //--- total items rows = ( from row in sortedRecords select new { i = row.USER_ID, cell = new string[] { row.USER_ID.ToString(), row.FNAME.ToString(), row.LNAME } } ).ToArray() }; result = Newtonsoft.Json.JsonConvert.SerializeObject(jsonData); } catch (Exception ex) { Debug.WriteLine(ex); } finally { if (db != null) db.Dispose(); } return result; } ================================================== Third, NECESSITIES In order to have dynamic OrderBy clauses in the LINQ, I had to pull in a class to my AppCode folder called 'Dynamic.cs'. You can retrieve the file from downloading here. You will find the file in the "DynamicQuery" folder. That file will give you the ability to utilized dynamic ORDERBY clause since we don't know what column we're filtering by except on the initial load. To serialize the JSON back from the C-sharp to the JS, I incorporated the James Newton-King JSON.net DLL found here : http://json.codeplex.com/releases/view/37810. After downloading, there is a "Newtonsoft.Json.Compact.dll" which you can add in your Bin folder as a reference Here's my USING's block using System; using System.Collections; using System.Collections.Generic; using System.Linq; using System.Web.UI.WebControls; using System.Web.Services; using System.Linq.Dynamic; For the Javascript references, I'm using the following scripts in respective order in case that helps some folks: 1) jquery-1.3.2.min.js ... 2) jquery-ui-1.7.2.custom.min.js ... 3) json.min.js ... 4) i18n/grid.locale-en.js ... 5) jquery.jqGrid.min.js For the CSS, I'm using jqGrid's necessities as well as the jQuery UI Theme: 1) jquery_theme/jquery-ui-1.7.2.custom.css ... 2) ui.jqgrid.css The key to getting the parameters from the JS to the WebMethod without having to parse an unserialized string on the backend or having to setup some JS logic to switch methods for different numbers of parameters was this block postData: { searchString: '', searchField: '', searchOper: '' }, Those parameters will still be set correctly when you actually do a search and then reset to empty when you "reset" or want the grid to not do any filtering Hope this helps some others!!!! Please reply if you find major issues or ways of refactoring or doing better that I haven't considered.

Read the article

Ajax Control Toolkit December 2013 Release

- by Stephen.Walther

Today, we released a new version of the Ajax Control Toolkit that contains several important bug fixes and new features. The new release contains a new Tabs control that has been entirely rewritten in jQuery. You can download the December 2013 release of the Ajax Control Toolkit at http://Ajax.CodePlex.com. Alternatively, you can install the latest version directly from NuGet: The Ajax Control Toolkit and jQuery The Ajax Control Toolkit now contains two controls written with jQuery: the ToggleButton control and the Tabs control. The goal is to rewrite the Ajax Control Toolkit to use jQuery instead of the Microsoft Ajax Library gradually over time. The motivation for rewriting the controls in the Ajax Control Toolkit to use jQuery is to modernize the toolkit. We want to continue to accept new controls written for the Ajax Control Toolkit contributed by the community. The community wants to use jQuery. We want to make it easy for the community to submit bug fixes. The community understands jQuery. Using the Ajax Control Toolkit with a Website that Already uses jQuery But what if you are already using jQuery in your website? Will adding the Ajax Control Toolkit to your website break your existing website? No, and here is why. The Ajax Control Toolkit uses jQuery.noConflict() to avoid conflicting with an existing version of jQuery in a page. The version of jQuery that the Ajax Control Toolkit uses is represented by a variable named actJQuery. You can use actJQuery side-by-side with an existing version of jQuery in a page without conflict.Imagine, for example, that you add jQuery to an ASP.NET page using a <script> tag like this: <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="WebForm1.aspx.cs" Inherits="TestACTDec2013.WebForm1" %> <!DOCTYPE html> <html > <head runat="server"> <title></title> </head> <body> <form id="form1" runat="server"> <div> <script src="Scripts/jquery-2.0.3.min.js"></script> <ajaxToolkit:ToolkitScriptManager runat="server" /> <ajaxToolkit:TabContainer runat="server"> <ajaxToolkit:TabPanel runat="server"> <HeaderTemplate> Tab 1 </HeaderTemplate> <ContentTemplate> <h1>First Tab</h1> </ContentTemplate> </ajaxToolkit:TabPanel> <ajaxToolkit:TabPanel runat="server"> <HeaderTemplate> Tab 2 </HeaderTemplate> <ContentTemplate> <h1>Second Tab</h1> </ContentTemplate> </ajaxToolkit:TabPanel> </ajaxToolkit:TabContainer> </div> </form> </body> </html> The page above uses the Ajax Control Toolkit Tabs control (TabContainer and TabPanel controls). The Tabs control uses the version of jQuery that is currently bundled with the Ajax Control Toolkit (jQuery version 1.9.1). The page above also includes a <script> tag that references jQuery version 2.0.3. You might need that particular version of jQuery, for example, to use a particular jQuery plugin. The two versions of jQuery in the page do not create a conflict. This fact can be demonstrated by entering the following two commands in the JavaScript console window: actJQuery.fn.jquery $.fn.jquery Typing actJQuery.fn.jquery will display the version of jQuery used by the Ajax Control Toolkit and typing $.fn.jquery (or jQuery.fn.jquery) will show the version of jQuery used by other jQuery plugins in the page. Preventing jQuery from Loading Twice So by default, the Ajax Control Toolkit will not conflict with any existing version of jQuery used in your application. However, this does mean that if you are already using jQuery in your application then jQuery will be loaded twice. For performance reasons, you might want to avoid loading the jQuery library twice. By taking advantage of the <remove> element in the AjaxControlToolkit.config file, you can prevent the Ajax Control Toolkit from loading its version of jQuery. <ajaxControlToolkit> <scripts> <remove name="jQuery.jQuery.js" /> </scripts> <controlBundles> <controlBundle> <control name="TabContainer" /> <control name="TabPanel" /> </controlBundle> </controlBundles> </ajaxControlToolkit> Be careful here: the name of the script being removed – jQuery.jQuery.js – is case-sensitive. If you remove jQuery then it is your responsibility to add the exact same version of jQuery back into your application. You can add jQuery back using a <script> tag like this: <script src="Scripts/jquery-1.9.1.min.js"></script> Make sure that you add the <script> tag before the server-side <form> tag or the Ajax Control Toolkit won’t detect the presence of jQuery. Alternatively, you can use the ToolkitScriptManager like this: <ajaxToolkit:ToolkitScriptManager runat="server"> <Scripts> <asp:ScriptReference Name="jQuery.jQuery.js" /> </Scripts> </ajaxToolkit:ToolkitScriptManager> The Ajax Control Toolkit is tested against the particular version of jQuery that is bundled with the Ajax Control Toolkit. Currently, the Ajax Control Toolkit uses jQuery version 1.9.1. If you attempt to use a different version of jQuery with the Ajax Control Toolkit then you will get the exception jQuery 1.9.1 is required in your JavaScript console window: If you need to use a different version of jQuery in the same page as the Ajax Control Toolkit then you should not use the <remove> element. Instead, allow the Ajax Control Toolkit to load its version of jQuery side-by-side with the other version of jQuery. Lots of Bug Fixes As usual, we implemented several important bug fixes with this release. The bug fixes concerned the following three controls: Tabs control – In the course of rewriting the Tabs control to use jQuery, we fixed several bugs related to the Tabs control. AjaxFileUpload control – We resolved an issue concerning the AjaxFileUpload and the TMP directory. HTMLEditor control – We updated the HTMLEditor control to use the new Ajax Control Toolkit bundling and minification framework. Summary I would like to thank the Superexpert team for their hard work on this release. Many long hours of coding and testing went into making this release possible.

Read the article

Using jQuery and SPServices to Display List Items

- by Bil Simser

I had an interesting challenge recently that I turned to Marc Anderson’s wonderful SPServices project for. If you haven’t already seen or used SPServices, please do. It’s a jQuery library that does primarily two things. First, it wraps up all of the SharePoint web services in a nice little AJAX wrapper for use in JavaScript. Second, it enhances the form editing of items in SharePoint so you’re not hacking up your List Form pages. My challenge was simple but interesting. The user wanted to display a SharePoint item page (DispForm.aspx, which already had some customization on it to display related items via this blog post from Codeless Solutions for SharePoint) but launch from an external application using the value of one of the fields in the SharePoint list. For simplicity let’s say my list is a list of customers and the related list is a list of orders for that customer. It would look something like this (click on the item to see the full image): Your first thought might be, that’s easy! Display the customer information using a DataView Web Part and filter the item using a query string to match the customer number. However there are a few problems with this idea: You’ll need to build a custom page and then attach that related orders view to it. This is a bit of a problem because the solution from Codeless Solutions relies on the Title field on the page to be displayed. On a custom page you would have to recreate all of the elements found on the DispForm.aspx page so the related view would work. The DataView Web Part doesn’t look *exactly* like what the out of the box display form page does. Not a huge problem and can be overcome with some CSS style overrides but still, more work. A DVWP showing a single record doesn’t have the same toolbar that you would using the DispForm.aspx. Not a show-stopper and you can rebuild the toolbar but it’s going to potentially require code and then there’s the security trimming, etc. that you have to get right. DVWPs are not automatically updated if you add a column to the list like DispForm.aspx is. Work, work, work. For these reasons I thought it would be easier to take the already existing (modified) DispForm.aspx page and just add some jQuery magic to the page to find the item. Why do we need to find it? DispForm.aspx relies on a querystring parameter called “ID” which then displays whatever that item ID number is in the list. Trouble is, when you’re coming in from an external app via a link, you don’t know what that internal ID is (and frankly shouldn’t). I don’t like exposing internal SharePoint IDs to the outside world for the same reason I don’t do it with database IDs. They’re internal and while it’s find to use on the site itself you don’t want external links using it. It’s volatile and can change (delete one item then re-add it back with the same data and watch any ID references break). The next thought might be to call a SharePoint web service with a CAML query to get the item ID number using some criteria (in this case, the customer number). That’s great if you have that ability but again we had an existing application we were just adding a link to. The last thing I wanted to do was to crack open the code on that sucker and start calling web services (primarily because it’s Java, but really I’m a lazy geek). However if you’re doing this and have access to call a web service that would be an option. Back to this problem, how do I a) find a SharePoint List Item based on some field value other than ID and b) make it low impact so I can just construct a URL to it? That’s where jQuery and SPServices came to the rescue. After spending a few hours of emails back and forth with Marc and a couple of phone calls (and updating jQuery to the latest version, duh!) it was a simple answer. First we need a reference to a) jQuery b) SPServices and c) our script. I just dropped a Content Editor Web Part, the Swiss Army Knives of Web Parts, onto the DispForm.aspx page and added these lines: <script type="text/javascript" src="http://intranet/JavaScript/jquery-1.4.2.min.js"></script> <script type="text/javascript" src="http://intranet/JavaScript/jquery.SPServices-0.5.3.min.js"></script> <script type="text/javascript" src="http://intranet/JavaScript/RedirectToID.js"> </script> Update it to point to where you keep your scripts located. I prefer to keep them all in Document Libraries as I can make changes to them without having to remote into the server (and on a multiple web front end, that’s just a PITA), it provides me with version control of sorts, and it’s quick to add new plugins and scripts. Now we can look at our RedirectToID.js script. This invokes the SPServices Library to call the GetListItems method of the Lists web service and then rewrites the URL to DispForm.aspx to use the correct SharePoint ID (the internal one). $(document).ready(function(){ var queryStringValues = $().SPServices.SPGetQueryString(); var id = queryStringValues["ID"]; if(id == "0") { var customer = queryStringValues["CustomerNumber"]; var query = "<Query><Where><Eq><FieldRef Name='CustomerNumber'/><Value Type='Text'>" + customer + "</Value></Eq></Where></Query>"; var url = window.location; $().SPServices({ operation: "GetListItems", listName: "Customers", async: false, CAMLQuery: query, completefunc: function (xData, Status) { $(xData.responseXML).find("[nodeName=z:row]").each(function(){ id = $(this).attr("ows_ID"); url = $().SPServices.SPGetCurrentSite() + "/Lists/Customers/DispForm.aspx?ID=" + id; window.location = url; }); } }); } }); What’s happening here? Line 3: We call SPServices.SPGetQueryString to get an array of query string values (a handy function in the library as I had 15 lines of code to do this which is now gone). Line 4: Extract the ID value from the query string Line 6: If we pass in “0” it means we’re looking up a field value. This allows DispForm.aspx to work like normal with SharePoint lists but lookup our values when invoked. Why ID at all? DispForm.aspx doesn’t work unless you pass in something and “0” is a *magic* number that will invoke the page but not lookup a value in the database. Line 8-15: Extract the CustomerNumber query string value, build a CAML query to find it then call the GetListitems method using SPServices Line 16: Process the results in our completefunc to iterate over all the rows (there should only be one) and extract the real ID of the item Line 17-20: Build a new URL based on the site (using a call to SPGetCurrentSite) and append our real ID to redirect to the DispForm.aspx page As you can see, it dynamically creates a CAML query for the call to the web service using the passed in value. You could even make this generic to take in different query strings, one for the field name to search for and the other for the value to find. That way it could be used for any field you want. For example you could bring up the correct item on the DispForm.aspx page based on customer name with something like this: http://myserver/Lists/Customers/DispForm.aspx?ID=0&FilterId=CustomerName&FilterValue=Sony Use your imagination. Some people would opt for building a custom page with a DVWP but if you want to leverage all the functionality of DispForm.aspx this might come in handy if you don’t want to rely on internal SharePoint IDs.

Read the article

ASP.NET MVC 3 Hosting :: New Features in ASP.NET MVC 3

- by mbridge

Razor View Engine The Razor view engine is a new view engine option for ASP.NET MVC that supports the Razor templating syntax. The Razor syntax is a streamlined approach to HTML templating designed with the goal of being a code driven minimalist templating approach that builds on existing C#, VB.NET and HTML knowledge. The result of this approach is that Razor views are very lean and do not contain unnecessary constructs that get in the way of you and your code. ASP.NET MVC 3 Preview 1 only supports C# Razor views which use the .cshtml file extension. VB.NET support will be enabled in later releases of ASP.NET MVC 3. For more information and examples, see Introducing “Razor” – a new view engine for ASP.NET on Scott Guthrie’s blog. Dynamic View and ViewModel Properties A new dynamic View property is available in views, which provides access to the ViewData object using a simpler syntax. For example, imagine two items are added to the ViewData dictionary in the Index controller action using code like the following: public ActionResult Index() { ViewData["Title"] = "The Title"; ViewData["Message"] = "Hello World!"; } Those properties can be accessed in the Index view using code like this: <h2>View.Title</h2> <p>View.Message</p> There is also a new dynamic ViewModel property in the Controller class that lets you add items to the ViewData dictionary using a simpler syntax. Using the previous controller example, the two values added to the ViewData dictionary can be rewritten using the following code: public ActionResult Index() { ViewModel.Title = "The Title"; ViewModel.Message = "Hello World!"; } “Add View” Dialog Box Supports Multiple View Engines The Add View dialog box in Visual Studio includes extensibility hooks that allow it to support multiple view engines, as shown in the following figure: Service Location and Dependency Injection Support ASP.NET MVC 3 introduces improved support for applying Dependency Injection (DI) via Inversion of Control (IoC) containers. ASP.NET MVC 3 Preview 1 provides the following hooks for locating services and injecting dependencies: - Creating controller factories. - Creating controllers and setting dependencies. - Setting dependencies on view pages for both the Web Form view engine and the Razor view engine (for types that derive from ViewPage, ViewUserControl, ViewMasterPage, WebViewPage). - Setting dependencies on action filters. Using a Dependency Injection container is not required in order for ASP.NET MVC 3 to function properly. Global Filters ASP.NET MVC 3 allows you to register filters that apply globally to all controller action methods. Adding a filter to the global filters collection ensures that the filter runs for all controller requests. To register an action filter globally, you can make the following call in the Application_Start method in the Global.asax file: GlobalFilters.Filters.Add(new MyActionFilter()); The source of global action filters is abstracted by the new IFilterProvider interface, which can be registered manually or by using Dependency Injection. This allows you to provide your own source of action filters and choose at run time whether to apply a filter to an action in a particular request. New JsonValueProviderFactory Class The new JsonValueProviderFactory class allows action methods to receive JSON-encoded data and model-bind it to an action-method parameter. This is useful in scenarios such as client templating. Client templates enable you to format and display a single data item or set of data items by using a fragment of HTML. ASP.NET MVC 3 lets you connect client templates easily with an action method that both returns and receives JSON data. Support for .NET Framework 4 Validation Attributes and IvalidatableObject The ValidationAttribute class was improved in the .NET Framework 4 to enable richer support for validation. When you write a custom validation attribute, you can use a new IsValid overload that provides a ValidationContext instance. This instance provides information about the current validation context, such as what object is being validated. This change enables scenarios such as validating the current value based on another property of the model. The following example shows a sample custom attribute that ensures that the value of PropertyOne is always larger than the value of PropertyTwo: public class CompareValidationAttribute : ValidationAttribute { protected override ValidationResult IsValid(object value, ValidationContext validationContext) { var model = validationContext.ObjectInstance as SomeModel; if (model.PropertyOne > model.PropertyTwo) { return ValidationResult.Success; } return new ValidationResult("PropertyOne must be larger than PropertyTwo"); } } Validation in ASP.NET MVC also supports the .NET Framework 4 IValidatableObject interface. This interface allows your model to perform model-level validation, as in the following example: public class SomeModel : IValidatableObject { public int PropertyOne { get; set; } public int PropertyTwo { get; set; } public IEnumerable<ValidationResult> Validate(ValidationContext validationContext) { if (PropertyOne <= PropertyTwo) { yield return new ValidationResult( "PropertyOne must be larger than PropertyTwo"); } } } New IClientValidatable Interface The new IClientValidatable interface allows the validation framework to discover at run time whether a validator has support for client validation. This interface is designed to be independent of the underlying implementation; therefore, where you implement the interface depends on the validation framework in use. For example, for the default data annotations-based validator, the interface would be applied on the validation attribute. Support for .NET Framework 4 Metadata Attributes ASP.NET MVC 3 now supports .NET Framework 4 metadata attributes such as DisplayAttribute. New IMetadataAware Interface The new IMetadataAware interface allows you to write attributes that simplify how you can contribute to the ModelMetadata creation process. Before this interface was available, you needed to write a custom metadata provider in order to have an attribute provide extra metadata. This interface is consumed by the AssociatedMetadataProvider class, so support for the IMetadataAware interface is automatically inherited by all classes that derive from that class (notably, the DataAnnotationsModelMetadataProvider class). New Action Result Types In ASP.NET MVC 3, the Controller class includes two new action result types and corresponding helper methods. HttpNotFoundResult Action The new HttpNotFoundResult action result is used to indicate that a resource requested by the current URL was not found. The status code is 404. This class derives from HttpStatusCodeResult. The Controller class includes an HttpNotFound method that returns an instance of this action result type, as shown in the following example: public ActionResult List(int id) { if (id < 0) { return HttpNotFound(); } return View(); } HttpStatusCodeResult Action The new HttpStatusCodeResult action result is used to set the response status code and description. Permanent Redirect The HttpRedirectResult class has a new Boolean Permanent property that is used to indicate whether a permanent redirect should occur. A permanent redirect uses the HTTP 301 status code. Corresponding to this change, the Controller class now has several methods for performing permanent redirects: - RedirectPermanent - RedirectToRoutePermanent - RedirectToActionPermanent These methods return an instance of HttpRedirectResult with the Permanent property set to true. Breaking Changes The order of execution for exception filters has changed for exception filters that have the same Order value. In ASP.NET MVC 2 and earlier, exception filters on the controller with the same Order as those on an action method were executed before the exception filters on the action method. This would typically be the case when exception filters were applied without a specified order Order value. In MVC 3, this order has been reversed in order to allow the most specific exception handler to execute first. As in earlier versions, if the Order property is explicitly specified, the filters are run in the specified order. Known Issues When you are editing a Razor view (CSHTML file), the Go To Controller menu item in Visual Studio will not be available, and there are no code snippets.

Read the article

Remotely Schedule and Stream Recorded TV in Windows 7 Media Center

- by DigitalGeekery

Have you ever been away from home and suddenly realized you forgot to record your favorite program? Now Windows 7 Media Center, users can schedule recordings remotely from their phones or mobile devices with Remote Potato. How it Works Remote Potato installs server software on the host computer running Windows 7 Media Center. Once the software is installed, we’ll need to do some port forwarding on the router and setup an optional dynamic DNS address. When setup is completed, we will access the application through a web based interface. Silverlight is required for Streaming recorded TV, but scheduling recordings can be done through an HTML interface. Installing Remote Potato Download and install Remote Potato on the Media Center PC. (See download link below) If you plan to stream any Recorded TV, you’ll also want to install the streaming pack located on the same page. It isn’t required to stream all shows, only shows that require the AC3 audio codec. Click Yes to allow Remote Potato to add rules to the Windows Firewall for remote access. You’ll likely need to accept a few UAC prompts. When notified that the rules were added, click OK. Remote Potato will then prompt you to allow administrator privileges to reserve a URL for it’s web server. Click Yes. Remote Potato server will start. Click on the configuration button at the right to to reveal the settings tabs. One the General tab, you’ll have the option to run Remote Potato on startup and minimized in the System Tray. If you’re running Media Center on a dedicated HTPC, you’ll probably want to enable both startup options. Forwarding Ports on Your Router You’ll need to forward a couple ports on your router. By default, these will be ports 9080 and 9081. In this example we’re using a Linksys WRT54GL router, however, the steps for port forwarding will vary from router to router. On the Linksys configuration page, click on the Applications & Gaming Tab, and then the Port Range Forward tab. Under Application, type in a name of your choosing. In both the Start and End boxes, type the port number 9080. Enter the local IP address of your Media Center computer in the IP address column. Click the check box under Enable. Repeat the process on the next line, but this time use port 9081. When finished, click the Save Settings button. Note: It’s highly recommended that you configure the home computer running Media Center & Remote Potato with a static IP address. Find your IP Address You’ll need to find the IP address assigned to your router from your ISP. There are many ways to do this but a quick and easy way is to visit a site like checkip.dyndns.org (link available below) The current external IP address of your router will be displayed in the browser. Dynamic DNS This is an optional step, but it’s highly recommended. Many routers, such as the Linksys WRT54GL we are using, support Dynamic DNS (DDNS). What Dynamic DNS allows you to do is affiliate your home router’s external IP address to a domain name. Every time your home router is assigned a a new IP address by your ISP, the domain name is updated to point to your new IP address. Remote Potato’s user interface is accessed over the Internet is by connecting to your router’s IP address followed by a colon and the port number. (Ex: XXX.XXX.XXX.XXX:9080) Instead of constantly having to look up and remember an IP address, you can use DDNS along with a 3rd party provider like DynDNS.com, to sign up for a free domain name and configure it to be updated each time your router is assigned a new IP address. Go to the DynDNS.com website (See link at the end of the article) and sign up for a free Domain name. You’ll need to register and confirm by email. Once you’ve signed in and selected your domain name click Activate Services. You’ll get a confirmation message that your domain name has been activated. On the Linksys WRT54GL click on the Setup tab an then DDNS. Select DynDNS.org, or TZO.com if you prefer to use their service, from the drop down list. With DynDNS, you’ll need to fill in your username and password you signed up with at the DynDNS website and the hostname you chose. Note: You can connect over your local network with the IP Address of the computer running Remote Potato followed by a colon and the port number. Ex: 192.168.1.2:9080 Logging in Remote Potato and Recording a Show Once you connect, you’ll see the start page. To view the TV listings, click on TV Guide. You’ll then see your guide listings. There are a few ways to navigate the listings. At the top left, you can click on any of the preset time buttons to jump to the listings at that time of the day. Click on the arrows to the right and left of the day and date at the top center to proceed to the previous or next day. Or, jump to a specific day with the date and date buttons at the top right. To setup a recording, click on a program. You can choose to record the individual show or the entire series by clicking on Record Show or Record Series. Remote Potato on Mobile Devices Perhaps the coolest feature of Remote Potato is the ability to schedule recording from your phone or mobile device. Note: For any devices or computers without Silverlight, you will be prompted to view the HTML page. Select Browse Listings. Select your program to record. In the Program Details, select Record Show to record the single episode or Record Series to record all instances of the series. You will then see a red dot on the program listing to indicate that the show is scheduled for recording. Streaming Recorded TV Click on Recorded TV from the home screen to access your previously recorded TV programs. Click on the selection you wish to stream. Click on Play. If you receive this error message, you’ll need to install the streaming pack for Remote Potato. This is found on the same download page as installation files. (See link below) The Begin from slider allows you to start playback from the start (by default) or a different time of the program by moving the slider. The Quality (bitrate) setting allows you to choose the quality of the playback. We found the video quality on the Normal setting to be pretty lousy, and Low was just pointless. High was the best overall viewing experience as it provided smooth quality video playback. We experienced significant stuttering during playback using the Ultra High setting. Click Start when you are ready to begin. When playback begins you’ll see a slider at the top right. Move the slider left or right to increase or decrease the size of the video. There’s also a button to switch to full screen. Media Center users who travel frequently or are always on the go will likely find Remote Potato to be a blessing. Since being released earlier this year, updates for Remote Potato have come fast and furious. The latest beta release includes support for streaming music and photos. If you like those nice network TV logos, check out our article on adding TV channel logos to Windows Media Center. Downloads and Links Download Remote Potato and Streaming Pack Find your IP address Sign Up for a Domain Name at DynDNS.com Similar Articles Productive Geek Tips Schedule Updates for Windows Media CenterUsing Netflix Watchnow in Windows Vista Media Center (Gmedia)Add a Sleep Timer to Windows 7 Media CenterStartup Customizations for Media Center in Windows 7Enable Media Streaming in Windows Home Server to Windows Media Player TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 FoxClocks adds World Times in your Statusbar (Firefox) Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos

Read the article

WPF TreeView MouseDown

- by imekon

I've got something like this in a TreeView: <DataTemplate x:Key="myTemplate"> <StackPanel MouseDown="OnItemMouseDown"> ... </StackPanel> </DataTemplate> Using this I get the mouse down events if I click on items in the stack panel. However... there seems to be another item behind the stack panel that is the TreeViewItem - it's very hard to hit, but not impossible, and that's when the problems start to occur. I had a go at handling PreviewMouseDown on TreeViewItem, however that seems to require e.Handled = false otherwise standard tree view behaviour stops working. Ok, Here's the source code... MainWindow.xaml <Window x:Class="WPFMultiSelectTree.MainWindow" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:local="clr-namespace:WPFMultiSelectTree" Title="Multiple Selection Tree" Height="300" Width="300"> <Window.Resources>  <local:VisibilityConverter x:Key="visibilityConverter"/> <local:VisibilityInverter x:Key="visibilityInverter"/>  <Style TargetType="TreeViewItem"> <Style.Triggers> <DataTrigger Binding="{Binding Selected}" Value="True"> <Setter Property="Background" Value="DarkBlue"/> <Setter Property="Foreground" Value="White"/> </DataTrigger> </Style.Triggers> <EventSetter Event="PreviewMouseDown" Handler="OnTreePreviewMouseDown"/> </Style>  <HierarchicalDataTemplate x:Key="RecursiveTemplate" ItemsSource="{Binding Children}"> <StackPanel Margin="2" Orientation="Horizontal" MouseDown="OnTreeMouseDown"> <Ellipse Width="12" Height="12" Fill="Green"/> <TextBlock Margin="2" Text="{Binding Name}" Visibility="{Binding Editing, Converter={StaticResource visibilityInverter}}"/> <TextBox Margin="2" Text="{Binding Name}" KeyDown="OnTextBoxKeyDown" IsVisibleChanged="OnTextBoxIsVisibleChanged" Visibility="{Binding Editing, Converter={StaticResource visibilityConverter}}"/> <TextBlock Margin="2" Text="{Binding Index, StringFormat=({0})}"/> </StackPanel> </HierarchicalDataTemplate>  <DataTemplate x:Key="ListTemplate"> <TextBlock Text="{Binding Name}"/> </DataTemplate> </Window.Resources> <Grid>  <Grid.RowDefinitions> <RowDefinition Height="Auto"/> <RowDefinition/> <RowDefinition Height="Auto"/> <RowDefinition/> </Grid.RowDefinitions>  <TextBlock Grid.Row="0" Margin="5" Background="PowderBlue">Multiple selection tree view</TextBlock>  <TreeView Name="m_tree" Margin="2" Grid.Row="1" ItemsSource="{Binding Children}" ItemTemplate="{StaticResource RecursiveTemplate}"/>  <TextBlock Grid.Row="2" Margin="5" Background="PowderBlue">The currently selected items in the tree</TextBlock>  <ListBox Name="m_list" Margin="2" Grid.Row="3" ItemsSource="{Binding .}" ItemTemplate="{StaticResource ListTemplate}"/> </Grid> </Window> MainWindow.xaml.cs /// <summary> /// Interaction logic for MainWindow.xaml /// </summary> public partial class MainWindow : Window { private Container m_root; private Container m_first; private ObservableCollection<Container> m_selection; private string m_current; /// <summary> /// Constructor /// </summary> public MainWindow() { InitializeComponent(); m_selection = new ObservableCollection<Container>(); m_root = new Container("root"); for (int parents = 0; parents < 50; parents++) { Container parent = new Container(String.Format("parent{0}", parents + 1)); for (int children = 0; children < 1000; children++) { parent.Add(new Container(String.Format("child{0}", children + 1))); } m_root.Add(parent); } m_tree.DataContext = m_root; m_list.DataContext = m_selection; m_first = null; } /// <summary> /// Has the shift key been pressed? /// </summary> private bool ShiftPressed { get { return Keyboard.IsKeyDown(Key.LeftShift) || Keyboard.IsKeyDown(Key.RightShift); } } /// <summary> /// Has the control key been pressed? /// </summary> private bool CtrlPressed { get { return Keyboard.IsKeyDown(Key.LeftCtrl) || Keyboard.IsKeyDown(Key.RightCtrl); } } /// <summary> /// Clear down the selection list /// </summary> private void DeselectAndClear() { foreach(Container container in m_selection) { container.Selected = false; } m_selection.Clear(); } /// <summary> /// Add the container to the list (if not already present), /// mark as selected /// </summary> /// <param name="container"></param> private void AddToSelection(Container container) { if (container == null) { return; } foreach (Container child in m_selection) { if (child == container) { return; } } container.Selected = true; m_selection.Add(container); } /// <summary> /// Remove container from list, mark as not selected /// </summary> /// <param name="container"></param> private void RemoveFromSelection(Container container) { m_selection.Remove(container); container.Selected = false; } /// <summary> /// Process single click on a tree item /// /// Normally just select an item /// /// SHIFT-Click extends selection /// CTRL-Click toggles a selection /// </summary> /// <param name="sender"></param> private void OnTreeSingleClick(object sender) { FrameworkElement element = sender as FrameworkElement; if (element != null) { Container container = element.DataContext as Container; if (container != null) { if (CtrlPressed) { if (container.Selected) { RemoveFromSelection(container); } else { AddToSelection(container); } } else if (ShiftPressed) { if (container.Parent == m_first.Parent) { if (container.Index < m_first.Index) { Container item = container; for (int i = container.Index; i < m_first.Index; i++) { AddToSelection(item); item = item.Next; if (item == null) { break; } } } else if (container.Index > m_first.Index) { Container item = m_first; for (int i = m_first.Index; i <= container.Index; i++) { AddToSelection(item); item = item.Next; if (item == null) { break; } } } } } else { DeselectAndClear(); m_first = container; AddToSelection(container); } } } } /// <summary> /// Process double click on tree item /// </summary> /// <param name="sender"></param> private void OnTreeDoubleClick(object sender) { FrameworkElement element = sender as FrameworkElement; if (element != null) { Container container = element.DataContext as Container; if (container != null) { container.Editing = true; m_current = container.Name; } } } /// <summary> /// Clicked on the stack panel in the tree view /// /// Double left click: /// /// Switch to editing mode (flips visibility of textblock and textbox) /// </summary> /// <param name="sender"></param> /// <param name="e"></param> private void OnTreeMouseDown(object sender, MouseButtonEventArgs e) { Debug.WriteLine("StackPanel mouse down"); switch(e.ChangedButton) { case MouseButton.Left: switch (e.ClickCount) { case 2: OnTreeDoubleClick(sender); e.Handled = true; break; } break; } } /// <summary> /// Clicked on tree view item in tree /// </summary> /// <param name="sender"></param> /// <param name="e"></param> private void OnTreePreviewMouseDown(object sender, MouseButtonEventArgs e) { Debug.WriteLine("TreeViewItem preview mouse down"); switch (e.ChangedButton) { case MouseButton.Left: switch (e.ClickCount) { case 1: { // We've had a single click on a tree view item // Unfortunately this is the WHOLE tree item, including the +/- // symbol to the left. The tree doesn't do a selection, so we // have to filter this out... MouseDevice device = e.Device as MouseDevice; Debug.WriteLine(String.Format("Tree item clicked on: {0}", device.DirectlyOver.GetType().ToString())); // This is bad. The whole point of WPF is for the code // not to know what the UI has - yet here we are testing for // it as a workaround. Sigh... if (device.DirectlyOver.GetType() != typeof(Path)) { OnTreeSingleClick(sender); } // Cannot say handled - if we do it stops the tree working! //e.Handled = true; } break; } break; } } /// <summary> /// Key press in text box /// /// Return key finishes editing /// Escape key finishes editing, restores original value (this doesn't work!) /// </summary> /// <param name="sender"></param> /// <param name="e"></param> private void OnTextBoxKeyDown(object sender, KeyEventArgs e) { switch(e.Key) { case Key.Return: { TextBox box = sender as TextBox; if (box != null) { Container container = box.DataContext as Container; if (container != null) { container.Editing = false; e.Handled = true; } } } break; case Key.Escape: { TextBox box = sender as TextBox; if (box != null) { Container container = box.DataContext as Container; if (container != null) { container.Editing = false; container.Name = m_current; e.Handled = true; } } } break; } } /// <summary> /// When text box becomes visible, grab focus and select all text in it. /// </summary> /// <param name="sender"></param> /// <param name="e"></param> private void OnTextBoxIsVisibleChanged(object sender, DependencyPropertyChangedEventArgs e) { bool visible = (bool)e.NewValue; if (visible) { TextBox box = sender as TextBox; if (box != null) { box.Focus(); box.SelectAll(); } } } } Here's the Container class public class Container : INotifyPropertyChanged { private string m_name; private ObservableCollection<Container> m_children; private Container m_parent; private bool m_selected; private bool m_editing; /// <summary> /// Constructor /// </summary> /// <param name="name">name of object</param> public Container(string name) { m_name = name; m_children = new ObservableCollection<Container>(); m_parent = null; m_selected = false; m_editing = false; } /// <summary> /// Name of object /// </summary> public string Name { get { return m_name; } set { if (m_name != value) { m_name = value; OnPropertyChanged("Name"); } } } /// <summary> /// Index of object in parent's children /// /// If there's no parent, the index is -1 /// </summary> public int Index { get { if (m_parent != null) { return m_parent.Children.IndexOf(this); } return -1; } } /// <summary> /// Get the next item, assuming this is parented /// /// Returns null if end of list reached, or no parent /// </summary> public Container Next { get { if (m_parent != null) { int index = Index + 1; if (index < m_parent.Children.Count) { return m_parent.Children[index]; } } return null; } } /// <summary> /// List of children /// </summary> public ObservableCollection<Container> Children { get { return m_children; } } /// <summary> /// Selected status /// </summary> public bool Selected { get { return m_selected; } set { if (m_selected != value) { m_selected = value; OnPropertyChanged("Selected"); } } } /// <summary> /// Editing status /// </summary> public bool Editing { get { return m_editing; } set { if (m_editing != value) { m_editing = value; OnPropertyChanged("Editing"); } } } /// <summary> /// Parent of this object /// </summary> public Container Parent { get { return m_parent; } set { m_parent = value; } } /// <summary> /// WPF Property Changed event /// </summary> public event PropertyChangedEventHandler PropertyChanged; /// <summary> /// Handler to inform WPF that a property has changed /// </summary> /// <param name="name"></param> private void OnPropertyChanged(string name) { if (PropertyChanged != null) { PropertyChanged(this, new PropertyChangedEventArgs(name)); } } /// <summary> /// Add a child to this container /// </summary> /// <param name="child"></param> public void Add(Container child) { m_children.Add(child); child.m_parent = this; } /// <summary> /// Remove a child from this container /// </summary> /// <param name="child"></param> public void Remove(Container child) { m_children.Remove(child); child.m_parent = null; } } The two classes VisibilityConverter and VisibilityInverter are implementations of IValueConverter that translates bool to Visibility. They make sure the TextBlock is displayed when not editing, and the TextBox is displayed when editing.

Read the article

TortoiseSVN hangs in Windows Server 2012 Azure VM

- by ZaijiaN

Following @shanselman's article on remoting into an Azure VM for development, I spun up my own VS 2013 VM, and that image runs on WS 2012. Once I was able to remote in, I started installing all my dev tools, including Tortoise SVN 1.8.3 64bit. Things went south once I started attempting to check out code from my personal svn server. It would hang and freeze often, although sometimes it would work - I was able to partially check out projects, but I would get frequent connection time out errors. My personal svn server (VisualSVN 2.7.2) runs at home on a windows 7 machine, and I have a dyndns url pointing to it. I have also configured my router to passthrough all 443 traffic to the appropriate port on the server. I self-signed a cert and made sure it was imported into the VM cert store under trusted root authorities. I have no problems connecting to my svn server from 4-5 other computers & locations. From the Azure VM, in both IE and Chrome, I can access the repository web browser with no issues. There are no outbound firewall restrictions. I have installed other SVN add-ons for Visual Studio (AnkhSVN, VisualSVN) and attempted to connect with my svn server, with largely the same results - random and persistent connection issues (hangs/timeouts). I spun up a completely fresh WS 2008 Azure VM, and installed TortoiseSVN, and had the same results. So I'm at a loss as to what the problem is and how to fix it. Web searches on tortoisesvn and windows server issues doesn't yield any current or relevant information. At this point, i'm guessing that maybe some setting or configuration that MS Azure VM images is the culprit - although I should probably attempt to spin up my own local WS VM to rule out that it's a window server issue. Any thoughts? I hope I'm just missing something really obvious!

Read the article

Working with Silverlight DataGrid RowDetailsTemplate

- by mohanbrij

In this post I am going to show how we can use the Silverlight DataGrid RowDetails Template, Before I start I assume that you know basics of Silverlight and also know how you create a Silverlight Projects. I have started with the Silverlight Application, and kept all the default options before I created a Silverlight Project. After this I added a Silverlight DataGrid control to my MainForm.xaml page, using the DragDrop feature of Visual Studio IDE, this will help me to add the default namespace and references automatically. Just to give you a quick look of what exactly I am going to do, I will show you in the screen below my final target, before I start explaining rest of my codes. Before I start with the real code, first I have to do some ground work, as I am not getting the data from the DB, so I am creating a class where I will populate the dummy data. EmployeeData.cs public class EmployeeData { public string FirstName { get; set; } public string LastName { get; set; } public string Address { get; set; } public string City { get; set; } public string State { get; set; } public string Country { get; set; } public EmployeeData() { } public List<EmployeeData> GetEmployeeData() { List<EmployeeData> employees = new List<EmployeeData>(); employees.Add ( new EmployeeData { Address = "#407, PH1, Foyer Appartment", City = "Bangalore", Country = "India", FirstName = "Brij", LastName = "Mohan", State = "Karnataka" }); employees.Add ( new EmployeeData { Address = "#332, Dayal Niketan", City = "Jamshedpur", Country = "India", FirstName = "Arun", LastName = "Dayal", State = "Jharkhand" }); employees.Add ( new EmployeeData { Address = "#77, MSR Nagar", City = "Bangalore", Country = "India", FirstName = "Sunita", LastName = "Mohan", State = "Karnataka" }); return employees; } } The above class will give me some sample data, I think this will be good enough to start with the actual code. now I am giving below the XAML code from my MainForm.xaml First I will put the Silverlight DataGrid, <data:DataGrid x:Name="gridEmployee" CanUserReorderColumns="False" CanUserSortColumns="False" RowDetailsVisibilityMode="VisibleWhenSelected" HorizontalAlignment="Center" ScrollViewer.VerticalScrollBarVisibility="Auto" Height="200" AutoGenerateColumns="False" Width="350" VerticalAlignment="Center"> Here, the most important property which I am going to set is RowDetailsVisibilityMode="VisibleWhenSelected" This will display the RowDetails only when we select the desired Row. Other option we have in this is Collapsed and Visible. Which will either make the row details always Visible or Always Collapsed. but to get the real effect I have selected VisibleWhenSelected. Now I am going to put the rest of my XAML code. <data:DataGrid.Columns>  <data:DataGridTextColumn Width="150" Header="First Name" Binding="{Binding FirstName}"/>   <data:DataGridTextColumn Width="150" Header="Last Name" Binding="{Binding LastName}"/>  </data:DataGrid.Columns> <data:DataGrid.RowDetailsTemplate>  <DataTemplate> <Border BorderBrush="Black" BorderThickness="1" Background="White"> <Grid> <Grid.ColumnDefinitions> <ColumnDefinition Width="0.2*" /> <ColumnDefinition Width="0.8*" /> </Grid.ColumnDefinitions> <Grid.RowDefinitions> <RowDefinition /> <RowDefinition /> <RowDefinition /> <RowDefinition /> </Grid.RowDefinitions>  <TextBlock Text="Address : " Grid.Column="0" Grid.Row="0" /> <TextBlock Text="{Binding Address}" Grid.Column="1" Grid.Row="0" /> <TextBlock Text="City : " Grid.Column="0" Grid.Row="1" /> <TextBlock Text="{Binding City}" Grid.Column="1" Grid.Row="1" /> <TextBlock Text="State : " Grid.Column="0" Grid.Row="2" /> <TextBlock Text="{Binding State}" Grid.Column="1" Grid.Row="2" /> <TextBlock Text="Country : " Grid.Column="0" Grid.Row="3" /> <TextBlock Text="{Binding Country}" Grid.Column="1" Grid.Row="3" /> </Grid> </Border> </DataTemplate>  </data:DataGrid.RowDetailsTemplate> In the code above, first I am declaring the simple dataGridTextColumn for FirstName and LastName, and after this I am creating the RowDetailTemplate, where we are just putting the code what we usually do to design the Grid. I mean nothing very much RowDetailTemplate Specific, most of the code which you will see inside the RowDetailsTemplate is plain and simple, where I am binding rest of the Address Column. And that,s it. Once we will bind the DataGrid, you are ready to go. In the code below from MainForm.xaml.cs, I am just binding the DataGrid public partial class MainPage : UserControl { public MainPage() { InitializeComponent(); BindControls(); } private void BindControls() { EmployeeData employees = new EmployeeData(); gridEmployee.ItemsSource = employees.GetEmployeeData(); } } Once you will run, you can see the output I have given in the screenshot above. In this example I have just shown the very basic example, now it up to your creativity and requirement, you can put some other controls like checkbox, Images, even other DataGrid, etc inside this RowDetailsTemplate column. I am attaching my sample source code with this post. I have used Silverlight 3 and Visual Studio 2008, but this is fully compatible with you Silverlight 4 and Visual Studio 2010. you may just need to Upgrade the attached Sample. You can download from here.

Read the article

Dependency Injection in ASP.NET MVC NerdDinner App using Ninject

- by shiju

In this post, I am applying Dependency Injection to the NerdDinner application using Ninject. The controllers of NerdDinner application have Dependency Injection enabled constructors. So we can apply Dependency Injection through constructor without change any existing code. A Dependency Injection framework injects the dependencies into a class when the dependencies are needed. Dependency Injection enables looser coupling between classes and their dependencies and provides better testability of an application and it removes the need for clients to know about their dependencies and how to create them. If you are not familiar with Dependency Injection and Inversion of Control (IoC), read Martin Fowler’s article Inversion of Control Containers and the Dependency Injection pattern. The Open Source Project NerDinner is a great resource for learning ASP.NET MVC. A free eBook provides an end-to-end walkthrough of building NerdDinner.com application. The free eBook and the Open Source Nerddinner application are extremely useful if anyone is trying to lean ASP.NET MVC. The first release of Nerddinner was as a sample for the first chapter of Professional ASP.NET MVC 1.0. Currently the application is updating to ASP.NET MVC 2 and you can get the latest source from the source code tab of Nerddinner at http://nerddinner.codeplex.com/SourceControl/list/changesets. I have taken the latest ASP.NET MVC 2 source code of the application and applied Dependency Injection using Ninject and Ninject extension Ninject.Web.Mvc.Ninject & Ninject.Web.MvcNinject is available at http://github.com/enkari/ninject and Ninject.Web.Mvc is available at http://github.com/enkari/ninject.web.mvcNinject is a lightweight and a great dependency injection framework for .NET. Ninject is a great choice of dependency injection framework when building ASP.NET MVC applications. Ninject.Web.Mvc is an extension for ninject which providing integration with ASP.NET MVC.Controller constructors and dependencies of NerdDinner application Listing 1 – Constructor of DinnersController public DinnersController(IDinnerRepository repository) { dinnerRepository = repository; } Listing 2 – Constrcutor of AccountControllerpublic AccountController(IFormsAuthentication formsAuth, IMembershipService service) { FormsAuth = formsAuth ?? new FormsAuthenticationService(); MembershipService = service ?? new AccountMembershipService(); } Listing 3 – Constructor of AccountMembership – Concrete class of IMembershipService public AccountMembershipService(MembershipProvider provider) { _provider = provider ?? Membership.Provider; } Dependencies of NerdDinnerDinnersController, RSVPController SearchController and ServicesController have a dependency with IDinnerRepositiry. The concrete implementation of IDinnerRepositiry is DinnerRepositiry. AccountController has dependencies with IFormsAuthentication and IMembershipService. The concrete implementation of IFormsAuthentication is FormsAuthenticationService and the concrete implementation of IMembershipService is AccountMembershipService. The AccountMembershipService has a dependency with ASP.NET Membership Provider. Dependency Injection in NerdDinner using NinjectThe below steps will configure Ninject to apply controller injection in NerdDinner application.Step 1 – Add reference for NinjectOpen the NerdDinner application and add reference to Ninject.dll and Ninject.Web.Mvc.dll. Both are available from http://github.com/enkari/ninject and http://github.com/enkari/ninject.web.mvcStep 2 – Extend HttpApplication with NinjectHttpApplication Ninject.Web.Mvc extension allows integration between the Ninject and ASP.NET MVC. For this, you have to extend your HttpApplication with NinjectHttpApplication. Open the Global.asax.cs and inherit your MVC application from NinjectHttpApplication instead of HttpApplication. public class MvcApplication : NinjectHttpApplication Then the Application_Start method should be replace with OnApplicationStarted method. Inside the OnApplicationStarted method, call the RegisterAllControllersIn() method. protected override void OnApplicationStarted() { AreaRegistration.RegisterAllAreas(); RegisterRoutes(RouteTable.Routes); ViewEngines.Engines.Clear(); ViewEngines.Engines.Add(new MobileCapableWebFormViewEngine()); RegisterAllControllersIn(Assembly.GetExecutingAssembly()); } The RegisterAllControllersIn method will enables to activating all controllers through Ninject in the assembly you have supplied .We are passing the current assembly as parameter for RegisterAllControllersIn() method. Now we can expose dependencies of controller constructors and properties to request injectionsStep 3 – Create Ninject ModulesWe can configure your dependency injection mapping information using Ninject Modules.Modules just need to implement the INinjectModule interface, but most should extend the NinjectModule class for simplicity. internal class ServiceModule : NinjectModule { public override void Load() { Bind<IFormsAuthentication>().To<FormsAuthenticationService>(); Bind<IMembershipService>().To<AccountMembershipService>(); Bind<MembershipProvider>().ToConstant(Membership.Provider); Bind<IDinnerRepository>().To<DinnerRepository>(); } } The above Binding inforamtion specified in the Load method tells the Ninject container that, to inject instance of DinnerRepositiry when there is a request for IDinnerRepositiry and inject instance of FormsAuthenticationService when there is a request for IFormsAuthentication and inject instance of AccountMembershipService when there is a request for IMembershipService. The AccountMembershipService class has a dependency with ASP.NET Membership provider. So we configure that inject the instance of Membership Provider. When configuring the binding information, you can specify the object scope in you application.There are four built-in scopes available in Ninject:Transient - A new instance of the type will be created each time one is requested. (This is the default scope). Binding method is .InTransientScope() Singleton - Only a single instance of the type will be created, and the same instance will be returned for each subsequent request. Binding method is .InSingletonScope()Thread - One instance of the type will be created per thread. Binding method is .InThreadScope() Request - One instance of the type will be created per web request, and will be destroyed when the request ends. Binding method is .InRequestScope() Step 4 – Configure the Ninject KernelOnce you create NinjectModule, you load them into a container called the kernel. To request an instance of a type from Ninject, you call the Get() extension method. We can configure the kernel, through the CreateKernel method in the Global.asax.cs. protected override IKernel CreateKernel() { var modules = new INinjectModule[] { new ServiceModule() }; return new StandardKernel(modules); } Here we are loading the Ninject Module (ServiceModule class created in the step 3) onto the container called the kernel for performing dependency injection.Source CodeYou can download the source code from http://nerddinneraddons.codeplex.com. I just put the modified source code onto CodePlex repository. The repository will update with more add-ons for the NerdDinner application.

Read the article

Using Unity – Part 1

- by nmarun

I have been going through implementing some IoC pattern using Unity and so I decided to share my learnings (I know that’s not an English word, but you get the point). Ok, so I have an ASP.net project named ProductWeb and a class library called ProductModel. In the model library, I have a class called Product: 1: public class Product 2: { 3: public string Name { get; set; } 4: public string Description { get; set; } 5: 6: public Product() 7: { 8: Name = "iPad"; 9: Description = "Not just a reader!"; 10: } 11: 12: public string WriteProductDetails() 13: { 14: return string.Format("Name: {0} Description: {1}", Name, Description); 15: } 16: } In the Page_Load event of the default.aspx, I’ll need something like: 1: Product product = new Product(); 2: productDetailsLabel.Text = product.WriteProductDetails(); Now, let’s go ‘Unity’fy this application. I assume you have all the bits for the pattern. If not, get it from here. I found this schematic representation of Unity pattern from the above link. This image might not make much sense to you now, but as we proceed, things will get better. The first step to implement the Inversion of Control pattern is to create interfaces that your types will implement. An IProduct interface is added to the ProductModel project. 1: public interface IProduct 2: { 3: string WriteProductDetails(); 4: } Let’s make our Product class to implement the IProduct interface. The application will compile and run as before despite the changes made. Add the following references to your web project: Microsoft.Practices.Unity Microsoft.Practices.Unity.Configuration Microsoft.Practices.Unity.StaticFactory Microsoft.Practices.ObjectBuilder2 We need to add a few lines to the web.config file. The line below tells what version of Unity pattern we’ll be using. 1: <configSections> 2: <section name="unity" type="Microsoft.Practices.Unity.Configuration.UnityConfigurationSection, Microsoft.Practices.Unity.Configuration, Version=1.2.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/> 3: </configSections> Add another block with the same name as the section name declared above – ‘unity’. 1: <unity> 2: <typeAliases> 3:  4: <typeAlias alias="IProduct" type="ProductModel.IProduct, ProductModel"/> 5: <typeAlias alias="Product" type="ProductModel.Product, ProductModel"/> 6: </typeAliases> 7: <containers> 8: <container name="unityContainer"> 9: <types> 10: <type type="IProduct" mapTo="Product"/> 11: </types> 12: </container> 13: </containers> 14: </unity> From the Unity Configuration schematic shown above, you see that the ‘unity’ block has a ‘typeAliases’ and a ‘containers’ segment. The typeAlias element gives a ‘short-name’ for a type. This ‘short-name’ can be used to point to this type any where in the configuration file (web.config in our case, but all this information could be coming from an external xml file as well). The container element holds all the mapping information. This container is referenced through its name attribute in the code and you can have multiple of these container elements in the containers segment. The ‘type’ element in line 10 basically says: ‘When Unity requests to resolve the alias IProduct, return an instance of whatever the short-name of Product points to’. This is the most basic piece of Unity pattern and all of this is accomplished purely through configuration. So, in future you have a change in your model, all you need to do is - implement IProduct on the new model class and - either add a typeAlias for the new type and point the mapTo attribute to the new alias declared - or modify the mapTo attribute of the type element to point to the new alias (as the case may be). Now for the calling code. It’s a good idea to store your unity container details in the Application cache, as this is rarely bound to change and also adds for better performance. The Global.asax.cs file comes for our rescue: 1: protected void Application_Start(object sender, EventArgs e) 2: { 3: // create and populate a new Unity container from configuration 4: IUnityContainer unityContainer = new UnityContainer(); 5: UnityConfigurationSection section = (UnityConfigurationSection)ConfigurationManager.GetSection("unity"); 6: section.Containers["unityContainer"].Configure(unityContainer); 7: Application["UnityContainer"] = unityContainer; 8: } 9: 10: protected void Application_End(object sender, EventArgs e) 11: { 12: Application["UnityContainer"] = null; 13: } All this says is: create an instance of UnityContainer() and read the ‘unity’ section from the configSections segment of the web.config file. Then get the container named ‘unityContainer’ and store it in the Application cache. In my code-behind file, I’ll make use of this UnityContainer to create an instance of the Product type. 1: public partial class _Default : Page 2: { 3: private IUnityContainer unityContainer; 4: protected void Page_Load(object sender, EventArgs e) 5: { 6: unityContainer = Application["UnityContainer"] as IUnityContainer; 7: if (unityContainer == null) 8: { 9: productDetailsLabel.Text = "ERROR: Unity Container not populated in Global.asax.<p />"; 10: } 11: else 12: { 13: IProduct productInstance = unityContainer.Resolve<IProduct>(); 14: productDetailsLabel.Text = productInstance.WriteProductDetails(); 15: } 16: } 17: } Looking the ‘else’ block, I’m asking the unityContainer object to resolve the IProduct type. All this does, is to look at the matching type in the container, read its mapTo attribute value, get the full name from the alias and create an instance of the Product class. Fabulous!! I’ll go more in detail in the next blog. The code for this blog can be found here.

Read the article

C# 4: The Curious ConcurrentDictionary

- by James Michael Hare

In my previous post (here) I did a comparison of the new ConcurrentQueue versus the old standard of a System.Collections.Generic Queue with simple locking. The results were exactly what I would have hoped, that the ConcurrentQueue was faster with multi-threading for most all situations. In addition, concurrent collections have the added benefit that you can enumerate them even if they're being modified. So I set out to see what the improvements would be for the ConcurrentDictionary, would it have the same performance benefits as the ConcurrentQueue did? Well, after running some tests and multiple tweaks and tunes, I have good and bad news. But first, let's look at the tests. Obviously there's many things we can do with a dictionary. One of the most notable uses, of course, in a multi-threaded environment is for a small, local in-memory cache. So I set about to do a very simple simulation of a cache where I would create a test class that I'll just call an Accessor. This accessor will attempt to look up a key in the dictionary, and if the key exists, it stops (i.e. a cache "hit"). However, if the lookup fails, it will then try to add the key and value to the dictionary (i.e. a cache "miss"). So here's the Accessor that will run the tests: 1: internal class Accessor 2: { 3: public int Hits { get; set; } 4: public int Misses { get; set; } 5: public Func<int, string> GetDelegate { get; set; } 6: public Action<int, string> AddDelegate { get; set; } 7: public int Iterations { get; set; } 8: public int MaxRange { get; set; } 9: public int Seed { get; set; } 10: 11: public void Access() 12: { 13: var randomGenerator = new Random(Seed); 14: 15: for (int i=0; i<Iterations; i++) 16: { 17: // give a wide spread so will have some duplicates and some unique 18: var target = randomGenerator.Next(1, MaxRange); 19: 20: // attempt to grab the item from the cache 21: var result = GetDelegate(target); 22: 23: // if the item doesn't exist, add it 24: if(result == null) 25: { 26: AddDelegate(target, target.ToString()); 27: Misses++; 28: } 29: else 30: { 31: Hits++; 32: } 33: } 34: } 35: } Note that so I could test different implementations, I defined a GetDelegate and AddDelegate that will call the appropriate dictionary methods to add or retrieve items in the cache using various techniques. So let's examine the three techniques I decided to test: Dictionary with mutex - Just your standard generic Dictionary with a simple lock construct on an internal object. Dictionary with ReaderWriterLockSlim - Same Dictionary, but now using a lock designed to let multiple readers access simultaneously and then locked when a writer needs access. ConcurrentDictionary - The new ConcurrentDictionary from System.Collections.Concurrent that is supposed to be optimized to allow multiple threads to access safely. So the approach to each of these is also fairly straight-forward. Let's look at the GetDelegate and AddDelegate implementations for the Dictionary with mutex lock: 1: var addDelegate = (key,val) => 2: { 3: lock (_mutex) 4: { 5: _dictionary[key] = val; 6: } 7: }; 8: var getDelegate = (key) => 9: { 10: lock (_mutex) 11: { 12: string val; 13: return _dictionary.TryGetValue(key, out val) ? val : null; 14: } 15: }; Nothing new or fancy here, just your basic lock on a private object and then query/insert into the Dictionary. Now, for the Dictionary with ReadWriteLockSlim it's a little more complex: 1: var addDelegate = (key,val) => 2: { 3: _readerWriterLock.EnterWriteLock(); 4: _dictionary[key] = val; 5: _readerWriterLock.ExitWriteLock(); 6: }; 7: var getDelegate = (key) => 8: { 9: string val; 10: _readerWriterLock.EnterReadLock(); 11: if(!_dictionary.TryGetValue(key, out val)) 12: { 13: val = null; 14: } 15: _readerWriterLock.ExitReadLock(); 16: return val; 17: }; And finally, the ConcurrentDictionary, which since it does all it's own concurrency control, is remarkably elegant and simple: 1: var addDelegate = (key,val) => 2: { 3: _concurrentDictionary[key] = val; 4: }; 5: var getDelegate = (key) => 6: { 7: string s; 8: return _concurrentDictionary.TryGetValue(key, out s) ? s : null; 9: }; Then, I set up a test harness that would simply ask the user for the number of concurrent Accessors to attempt to Access the cache (as specified in Accessor.Access() above) and then let them fly and see how long it took them all to complete. Each of these tests was run with 10,000,000 cache accesses divided among the available Accessor instances. All times are in milliseconds. 1: Dictionary with Mutex Locking 2: --------------------------------------------------- 3: Accessors Mostly Misses Mostly Hits 4: 1 7916 3285 5: 10 8293 3481 6: 100 8799 3532 7: 1000 8815 3584 8: 9: 10: Dictionary with ReaderWriterLockSlim Locking 11: --------------------------------------------------- 12: Accessors Mostly Misses Mostly Hits 13: 1 8445 3624 14: 10 11002 4119 15: 100 11076 3992 16: 1000 14794 4861 17: 18: 19: Concurrent Dictionary 20: --------------------------------------------------- 21: Accessors Mostly Misses Mostly Hits 22: 1 17443 3726 23: 10 14181 1897 24: 100 15141 1994 25: 1000 17209 2128 The first test I did across the board is the Mostly Misses category. The mostly misses (more adds because data requested was not in the dictionary) shows an interesting trend. In both cases the Dictionary with the simple mutex lock is much faster, and the ConcurrentDictionary is the slowest solution. But this got me thinking, and a little research seemed to confirm it, maybe the ConcurrentDictionary is more optimized to concurrent "gets" than "adds". So since the ratio of misses to hits were 2 to 1, I decided to reverse that and see the results. So I tweaked the data so that the number of keys were much smaller than the number of iterations to give me about a 2 to 1 ration of hits to misses (twice as likely to already find the item in the cache than to need to add it). And yes, indeed here we see that the ConcurrentDictionary is indeed faster than the standard Dictionary here. I have a strong feeling that as the ration of hits-to-misses gets higher and higher these number gets even better as well. This makes sense since the ConcurrentDictionary is read-optimized. Also note that I tried the tests with capacity and concurrency hints on the ConcurrentDictionary but saw very little improvement, I think this is largely because on the 10,000,000 hit test it quickly ramped up to the correct capacity and concurrency and thus the impact was limited to the first few milliseconds of the run. So what does this tell us? Well, as in all things, ConcurrentDictionary is not a panacea. It won't solve all your woes and it shouldn't be the only Dictionary you ever use. So when should we use each? Use System.Collections.Generic.Dictionary when: You need a single-threaded Dictionary (no locking needed). You need a multi-threaded Dictionary that is loaded only once at creation and never modified (no locking needed). You need a multi-threaded Dictionary to store items where writes are far more prevalent than reads (locking needed). And use System.Collections.Concurrent.ConcurrentDictionary when: You need a multi-threaded Dictionary where the writes are far more prevalent than reads. You need to be able to iterate over the collection without locking it even if its being modified. Both Dictionaries have their strong suits, I have a feeling this is just one where you need to know from design what you hope to use it for and make your decision based on that criteria.

Read the article

Access violation in DirectX OMSetRenderTargets

- by IDWMaster

I receive the following error (Unhandled exception at 0x527DAE81 (d3d11_1sdklayers.dll) in Lesson2.Triangles.exe: 0xC0000005: Access violation reading location 0x00000000) when running the Triangle sample application for DirectX 11 in D3D_FEATURE_LEVEL_9_1. This error occurs at the OMSetRenderTargets function, as shown below, and does not happen if I remove that function from the program (but then, the screen is blue, and does not render the triangle) //// THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF //// ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO //// THE IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A //// PARTICULAR PURPOSE. //// //// Copyright (c) Microsoft Corporation. All rights reserved #include #include #include "DirectXSample.h" #include "BasicMath.h" #include "BasicReaderWriter.h" using namespace Microsoft::WRL; using namespace Windows::UI::Core; using namespace Windows::Foundation; using namespace Windows::ApplicationModel::Core; using namespace Windows::ApplicationModel::Infrastructure; // This class defines the application as a whole. ref class Direct3DTutorialViewProvider : public IViewProvider { private: CoreWindow^ m_window; ComPtr m_swapChain; ComPtr m_d3dDevice; ComPtr m_d3dDeviceContext; ComPtr m_renderTargetView; public: // This method is called on application launch. void Initialize( _In_ CoreWindow^ window, _In_ CoreApplicationView^ applicationView ) { m_window = window; } // This method is called after Initialize. void Load(_In_ Platform::String^ entryPoint) { } // This method is called after Load. void Run() { // First, create the Direct3D device. // This flag is required in order to enable compatibility with Direct2D. UINT creationFlags = D3D11_CREATE_DEVICE_BGRA_SUPPORT; #if defined(_DEBUG) // If the project is in a debug build, enable debugging via SDK Layers with this flag. creationFlags |= D3D11_CREATE_DEVICE_DEBUG; #endif // This array defines the ordering of feature levels that D3D should attempt to create. D3D_FEATURE_LEVEL featureLevels[] = { D3D_FEATURE_LEVEL_11_1, D3D_FEATURE_LEVEL_11_0, D3D_FEATURE_LEVEL_10_1, D3D_FEATURE_LEVEL_10_0, D3D_FEATURE_LEVEL_9_3, D3D_FEATURE_LEVEL_9_1 }; ComPtr d3dDevice; ComPtr d3dDeviceContext; DX::ThrowIfFailed( D3D11CreateDevice( nullptr, // specify nullptr to use the default adapter D3D_DRIVER_TYPE_HARDWARE, nullptr, // leave as nullptr if hardware is used creationFlags, // optionally set debug and Direct2D compatibility flags featureLevels, ARRAYSIZE(featureLevels), D3D11_SDK_VERSION, // always set this to D3D11_SDK_VERSION &d3dDevice, nullptr, &d3dDeviceContext ) ); // Retrieve the Direct3D 11.1 interfaces. DX::ThrowIfFailed( d3dDevice.As(&m_d3dDevice) ); DX::ThrowIfFailed( d3dDeviceContext.As(&m_d3dDeviceContext) ); // After the D3D device is created, create additional application resources. CreateWindowSizeDependentResources(); // Create a Basic Reader-Writer class to load data from disk. This class is examined // in the Resource Loading sample. BasicReaderWriter^ reader = ref new BasicReaderWriter(); // Load the raw vertex shader bytecode from disk and create a vertex shader with it. auto vertexShaderBytecode = reader-ReadData("SimpleVertexShader.cso"); ComPtr vertexShader; DX::ThrowIfFailed( m_d3dDevice-CreateVertexShader( vertexShaderBytecode-Data, vertexShaderBytecode-Length, nullptr, &vertexShader ) ); // Create an input layout that matches the layout defined in the vertex shader code. // For this lesson, this is simply a float2 vector defining the vertex position. const D3D11_INPUT_ELEMENT_DESC basicVertexLayoutDesc[] = { { "POSITION", 0, DXGI_FORMAT_R32G32_FLOAT, 0, 0, D3D11_INPUT_PER_VERTEX_DATA, 0 }, }; ComPtr inputLayout; DX::ThrowIfFailed( m_d3dDevice-CreateInputLayout( basicVertexLayoutDesc, ARRAYSIZE(basicVertexLayoutDesc), vertexShaderBytecode-Data, vertexShaderBytecode-Length, &inputLayout ) ); // Load the raw pixel shader bytecode from disk and create a pixel shader with it. auto pixelShaderBytecode = reader-ReadData("SimplePixelShader.cso"); ComPtr pixelShader; DX::ThrowIfFailed( m_d3dDevice-CreatePixelShader( pixelShaderBytecode-Data, pixelShaderBytecode-Length, nullptr, &pixelShader ) ); // Create vertex and index buffers that define a simple triangle. float3 triangleVertices[] = { float3(-0.5f, -0.5f,13.5f), float3( 0.0f, 0.5f,0), float3( 0.5f, -0.5f,0), }; D3D11_BUFFER_DESC vertexBufferDesc = {0}; vertexBufferDesc.ByteWidth = sizeof(float3) * ARRAYSIZE(triangleVertices); vertexBufferDesc.Usage = D3D11_USAGE_DEFAULT; vertexBufferDesc.BindFlags = D3D11_BIND_VERTEX_BUFFER; vertexBufferDesc.CPUAccessFlags = 0; vertexBufferDesc.MiscFlags = 0; vertexBufferDesc.StructureByteStride = 0; D3D11_SUBRESOURCE_DATA vertexBufferData; vertexBufferData.pSysMem = triangleVertices; vertexBufferData.SysMemPitch = 0; vertexBufferData.SysMemSlicePitch = 0; ComPtr vertexBuffer; DX::ThrowIfFailed( m_d3dDevice-CreateBuffer( &vertexBufferDesc, &vertexBufferData, &vertexBuffer ) ); // Once all D3D resources are created, configure the application window. // Allow the application to respond when the window size changes. m_window-SizeChanged += ref new TypedEventHandler( this, &Direct3DTutorialViewProvider::OnWindowSizeChanged ); // Specify the cursor type as the standard arrow cursor. m_window-PointerCursor = ref new CoreCursor(CoreCursorType::Arrow, 0); // Activate the application window, making it visible and enabling it to receive events. m_window-Activate(); // Enter the render loop. Note that tailored applications should never exit. while (true) { // Process events incoming to the window. m_window-Dispatcher-ProcessEvents(CoreProcessEventsOption::ProcessAllIfPresent); // Specify the render target we created as the output target. ID3D11RenderTargetView* targets[1] = {m_renderTargetView.Get()}; m_d3dDeviceContext-OMSetRenderTargets( 1, targets, NULL // use no depth stencil ); // Clear the render target to a solid color. const float clearColor[4] = { 0.071f, 0.04f, 0.561f, 1.0f }; //Code fails here m_d3dDeviceContext-ClearRenderTargetView( m_renderTargetView.Get(), clearColor ); m_d3dDeviceContext-IASetInputLayout(inputLayout.Get()); // Set the vertex and index buffers, and specify the way they define geometry. UINT stride = sizeof(float3); UINT offset = 0; m_d3dDeviceContext-IASetVertexBuffers( 0, 1, vertexBuffer.GetAddressOf(), &stride, &offset ); m_d3dDeviceContext-IASetPrimitiveTopology(D3D11_PRIMITIVE_TOPOLOGY_TRIANGLELIST); // Set the vertex and pixel shader stage state. m_d3dDeviceContext-VSSetShader( vertexShader.Get(), nullptr, 0 ); m_d3dDeviceContext-PSSetShader( pixelShader.Get(), nullptr, 0 ); // Draw the cube. m_d3dDeviceContext-Draw(3,0); // Present the rendered image to the window. Because the maximum frame latency is set to 1, // the render loop will generally be throttled to the screen refresh rate, typically around // 60Hz, by sleeping the application on Present until the screen is refreshed. DX::ThrowIfFailed( m_swapChain-Present(1, 0) ); } } // This method is called before the application exits. void Uninitialize() { } private: // This method is called whenever the application window size changes. void OnWindowSizeChanged( _In_ CoreWindow^ sender, _In_ WindowSizeChangedEventArgs^ args ) { m_renderTargetView = nullptr; CreateWindowSizeDependentResources(); } // This method creates all application resources that depend on // the application window size. It is called at app initialization, // and whenever the application window size changes. void CreateWindowSizeDependentResources() { if (m_swapChain != nullptr) { // If the swap chain already exists, resize it. DX::ThrowIfFailed( m_swapChain-ResizeBuffers( 2, 0, 0, DXGI_FORMAT_R8G8B8A8_UNORM, 0 ) ); } else { // If the swap chain does not exist, create it. DXGI_SWAP_CHAIN_DESC1 swapChainDesc = {0}; swapChainDesc.Stereo = false; swapChainDesc.BufferUsage = DXGI_USAGE_RENDER_TARGET_OUTPUT; swapChainDesc.Scaling = DXGI_SCALING_NONE; swapChainDesc.Flags = 0; // Use automatic sizing. swapChainDesc.Width = 0; swapChainDesc.Height = 0; // This is the most common swap chain format. swapChainDesc.Format = DXGI_FORMAT_R8G8B8A8_UNORM; // Don't use multi-sampling. swapChainDesc.SampleDesc.Count = 1; swapChainDesc.SampleDesc.Quality = 0; // Use two buffers to enable flip effect. swapChainDesc.BufferCount = 2; // We recommend using this swap effect for all applications. swapChainDesc.SwapEffect = DXGI_SWAP_EFFECT_FLIP_SEQUENTIAL; // Once the swap chain description is configured, it must be // created on the same adapter as the existing D3D Device. // First, retrieve the underlying DXGI Device from the D3D Device. ComPtr dxgiDevice; DX::ThrowIfFailed( m_d3dDevice.As(&dxgiDevice) ); // Ensure that DXGI does not queue more than one frame at a time. This both reduces // latency and ensures that the application will only render after each VSync, minimizing // power consumption. DX::ThrowIfFailed( dxgiDevice-SetMaximumFrameLatency(1) ); // Next, get the parent factory from the DXGI Device. ComPtr dxgiAdapter; DX::ThrowIfFailed( dxgiDevice-GetAdapter(&dxgiAdapter) ); ComPtr dxgiFactory; DX::ThrowIfFailed( dxgiAdapter-GetParent( __uuidof(IDXGIFactory2), &dxgiFactory ) ); // Finally, create the swap chain. DX::ThrowIfFailed( dxgiFactory-CreateSwapChainForImmersiveWindow( m_d3dDevice.Get(), DX::GetIUnknown(m_window), &swapChainDesc, nullptr, // allow on all displays &m_swapChain ) ); } // Once the swap chain is created, create a render target view. This will // allow Direct3D to render graphics to the window. ComPtr backBuffer; DX::ThrowIfFailed( m_swapChain-GetBuffer( 0, __uuidof(ID3D11Texture2D), &backBuffer ) ); DX::ThrowIfFailed( m_d3dDevice-CreateRenderTargetView( backBuffer.Get(), nullptr, &m_renderTargetView ) ); // After the render target view is created, specify that the viewport, // which describes what portion of the window to draw to, should cover // the entire window. D3D11_TEXTURE2D_DESC backBufferDesc = {0}; backBuffer-GetDesc(&backBufferDesc); D3D11_VIEWPORT viewport; viewport.TopLeftX = 0.0f; viewport.TopLeftY = 0.0f; viewport.Width = static_cast(backBufferDesc.Width); viewport.Height = static_cast(backBufferDesc.Height); viewport.MinDepth = D3D11_MIN_DEPTH; viewport.MaxDepth = D3D11_MAX_DEPTH; m_d3dDeviceContext-RSSetViewports(1, &viewport); } }; // This class defines how to create the custom View Provider defined above. ref class Direct3DTutorialViewProviderFactory : IViewProviderFactory { public: IViewProvider^ CreateViewProvider() { return ref new Direct3DTutorialViewProvider(); } }; [Platform::MTAThread] int main(array^) { auto viewProviderFactory = ref new Direct3DTutorialViewProviderFactory(); Windows::ApplicationModel::Core::CoreApplication::Run(viewProviderFactory); return 0; }

Read the article

Convert Custom Firefox Setup to Firefox Portable?

- by dfree

I have a pretty awesome firefox set up and spent a lot of time getting it perfect. Is there any way that anyone knows about to convert the entire configuration to portable? Programs like MozBackup are great for backing up the complete set up, but you can't restore a Firefox profile to Firefox portable (maybe there is a workaround to fake it out? or possibly another method?) In case anyone is interested here is the gist of the best add-ons I've found: Autopager (scroll down google and other multi page results without clicking next) Coral IE Tab (IE in firefox - in case a website 'insists' that you use IE) Cyber search (search google straight from the address bar - VERY HELPFUL) Download StatusBar (display progress of downloads in the bottom of ff - no annoying popups FireFTP (erases need for an external FTP client - opens in a tab) Gmail manager (if you use multiple gmail accounts) Session Manager (saving multiple sessions of tabs - ff session recover) Surf Canyon (pull relevant stuff out of the depths of search results - even from craigslist Tab Mix Plus (ESSENTIAL - tab behavior customization - have multiple rows of tabs I also have it set up so you can type 'g test' in the address bar and ff will pull up the google results for 'test'. Similarly have it set up for guitar tabs (tab), facebook (f), wikipedia (w), google maps from my house (gmhome), torrents (tor), ticketmaster (t), rotten tomatoes (rt), craiglist (c) plus about 20 other sites.

Read the article

There is no web named - Sharepoint Event Hander

- by Roosh Malai

I activated following code with feature (web level scope). Now when i add an item to any document library it should create a folder "". No folder is created and no error is given either. can anyone see what's is going on? I got the following from the log file. I found similar code all over google so I am kinda puzzled why is not working in my environment. Thanks using System; using System.Collections.Generic; using System.Text; using Microsoft.SharePoint; namespace AddaFolder { class clAddaFolder : SPItemEventReceiver { public override void ItemAdded(SPItemEventProperties properties) { base.ItemAdded(properties); using (SPSite currentSite = new SPSite(SPContext.Current.Site.Url)) using (SPWeb currentWeb = currentSite.OpenWeb(SPContext.Current.Web.Url)) { try { //SPListTemplateCollection coll = currentWeb.ListTemplates; //Get the current document library link SPList newList = currentWeb.GetList(SPContext.Current.Web.Url); //.Site.Url); //newList = currentWeb.Lists.Add("My TEST Folder",SPFileSystemObjectType.Folder); //newList.Lists.Items.Add("My TEST Folder", SPFileSystemObjectType.Folder); //newList.Update(); SPListItem newListItem; //newListItem = newList.Folders.Add("", SPFileSystemObjectType.Folder, "My Test Folder"); newListItem = newList.Folders.Add(newList.ToString(), SPFileSystemObjectType.Folder, "My Test Folder"); newListItem.Update(); } catch (SPException spEx) { throw spEx; } } } } } 04/03/2010 17:52:44.25 w3wp.exe (0x00C0) 0x0C88 Windows SharePoint Services General 8kh7 High There is no Web named "/sites/myDevSiteColl/myDevWeb/Shared Documents/Forms/AllItems.aspx". 04/03/2010 17:52:44.26 w3wp.exe (0x00C0) 0x0C88 Windows SharePoint Services General 8kh7 High There is no Web named "/sites/myDevSiteColl/myDevWeb/My TEST Doc Library/Forms/AllItems.aspx". 04/03/2010 17:52:44.27 w3wp.exe (0x00C0) 0x0C88 Windows SharePoint Services General 8kh7 High There is no Web named "/sites/myDevSiteColl/myDevWeb/Lists/Calendar/calendar.aspx". 04/03/2010 17:52:44.29 w3wp.exe (0x00C0) 0x0C88 Windows SharePoint Services General 8kh7 High There is no Web named "/sites/myDevSiteColl/myDevWeb/Lists/Tasks/AllItems.aspx". 04/03/2010 17:52:44.30 w3wp.exe (0x00C0) 0x0C88 Windows SharePoint Services General 8kh7 High There is no Web named "/sites/myDevSiteColl/myDevWeb/Lists/Team Discussion/AllItems.aspx". 04/03/2010 17:52:44.31 w3wp.exe (0x00C0) 0x0C88 Windows SharePoint Services General 8kh7 High There is no Web named "/sites/myDevSiteColl/myDevWeb/Shared Documents/Forms/AllItems.aspx". 04/03/2010 17:52:44.32 w3wp.exe (0x00C0) 0x0C88 Windows SharePoint Services General 8kh7 High There is no Web named "/sites/myDevSiteColl/myDevWeb/My TEST Doc Library/Forms/AllItems.aspx". 04/03/2010 17:52:44.34 w3wp.exe (0x00C0) 0x0C88 Windows SharePoint Services General 8kh7 High There is no Web named "/sites/myDevSiteColl/myDevWeb/Lists/Calendar/calendar.aspx". 04/03/2010 17:52:44.35 w3wp.exe (0x00C0) 0x0C88 Windows SharePoint Services General 8kh7 High There is no Web named "/sites/myDevSiteColl/myDevWeb/Lists/Tasks/AllItems.aspx". 04/03/2010 17:52:44.36 w3wp.exe (0x00C0) 0x0C88 Windows SharePoint Services General 8kh7 High There is no Web named "/sites/myDevSiteColl/myDevWeb/Lists/Team Discussion/AllItems.aspx". 04/03/2010 17:52:51.33 w3wp.exe (0x00C0) 0x0C88 Windows SharePoint Services General 8kh7 High There is no Web named "/sites/myDevSiteColl/myDevWeb/Shared Documents/Forms/AllItems.aspx". 04/03/2010 17:52:51.34 w3wp.exe (0x00C0) 0x0C88 Windows SharePoint Services General 8kh7 High There is no Web named "/sites/myDevSiteColl/myDevWeb/My TEST Doc Library/Forms/AllItems.aspx". 04/03/2010 17:52:51.35 w3wp.exe (0x00C0) 0x0C88 Windows SharePoint Services General 8kh7 High There is no Web named "/sites/myDevSiteColl/myDevWeb/Lists/Calendar/calendar.aspx". 04/03/2010 17:52:51.37 w3wp.exe (0x00C0) 0x0C88 Windows SharePoint Services General 8kh7 High There is no Web named "/sites/myDevSiteColl/myDevWeb/Lists/Tasks/AllItems.aspx". 04/03/2010 17:52:51.38 w3wp.exe (0x00C0) 0x0C88 Windows SharePoint Services General 8kh7 High There is no Web named "/sites/myDevSiteColl/myDevWeb/Lists/Team Discussion/AllItems.aspx". 04/03/2010 17:52:51.39 w3wp.exe (0x00C0) 0x0C88 Windows SharePoint Services General 8kh7 High There is no Web named "/sites/myDevSiteColl/myDevWeb/Shared Documents/Forms/AllItems.aspx". 04/03/2010 17:52:51.40 w3wp.exe (0x00C0) 0x0C88 Windows SharePoint Services General 8kh7 High There is no Web named "/sites/myDevSiteColl/myDevWeb/My TEST Doc Library/Forms/AllItems.aspx". 04/03/2010 17:52:51.41 w3wp.exe (0x00C0) 0x0C88 Windows SharePoint Services General 8kh7 High There is no Web named "/sites/myDevSiteColl/myDevWeb/Lists/Calendar/calendar.aspx". 04/03/2010 17:52:51.43 w3wp.exe (0x00C0) 0x0C88 Windows SharePoint Services General 8kh7 High There is no Web named "/sites/myDevSiteColl/myDevWeb/Lists/Tasks/AllItems.aspx". 04/03/2010 17:52:51.44 w3wp.exe (0x00C0) 0x0C88 Windows SharePoint Services General 8kh7 High There is no Web named "/sites/myDevSiteColl/myDevWeb/Lists/Team Discussion/AllItems.aspx". 04/03/2010 17:53:02.69 w3wp.exe (0x00C0) 0x0C88 Windows SharePoint Services General 8kh7 High There is no Web named "/sites/myDevSiteColl/myDevWeb/Shared Documents/Forms/AllItems.aspx". 04/03/2010 17:53:02.71 w3wp.exe (0x00C0) 0x0C88 Windows SharePoint Services General 8kh7 High There is no Web named "/sites/myDevSiteColl/myDevWeb/My TEST Doc Library/Forms/AllItems.aspx". 04/03/2010 17:53:02.72 w3wp.exe (0x00C0) 0x0C88 Windows SharePoint Services General 8kh7 High There is no Web named "/sites/myDevSiteColl/myDevWeb/Lists/Calendar/calendar.aspx". 04/03/2010 17:53:02.73 w3wp.exe (0x00C0) 0x0C88 Windows SharePoint Services General 8kh7 High There is no Web named "/sites/myDevSiteColl/myDevWeb/Lists/Tasks/AllItems.aspx". 04/03/2010 17:53:02.74 w3wp.exe (0x00C0) 0x0C88 Windows SharePoint Services General 8kh7 High There is no Web named "/sites/myDevSiteColl/myDevWeb/Lists/Team Discussion/AllItems.aspx". 04/03/2010 17:53:02.75 w3wp.exe (0x00C0) 0x0C88 Windows SharePoint Services General 8kh7 High There is no Web named "/sites/myDevSiteColl/myDevWeb/Shared Documents/Forms/AllItems.aspx". 04/03/2010 17:53:02.76 w3wp.exe (0x00C0) 0x0C88 Windows SharePoint Services General 8kh7 High There is no Web named "/sites/myDevSiteColl/myDevWeb/My TEST Doc Library/Forms/AllItems.aspx". 04/03/2010 17:53:02.77 w3wp.exe (0x00C0) 0x0C88 Windows SharePoint Services General 8kh7 High There is no Web named "/sites/myDevSiteColl/myDevWeb/Lists/Calendar/calendar.aspx". 04/03/2010 17:53:02.78 w3wp.exe (0x00C0) 0x0C88 Windows SharePoint Services General 8kh7 High There is no Web named "/sites/myDevSiteColl/myDevWeb/Lists/Tasks/AllItems.aspx". 04/03/2010 17:53:02.79 w3wp.exe (0x00C0) 0x0C88 Windows SharePoint Services General 8kh7 High There is no Web named "/sites/myDevSiteColl/myDevWeb/Lists/Team Discussion/AllItems.aspx".

Read the article

Building and Deploying Windows Azure Web Sites using Git and GitHub for Windows

- by shiju

Microsoft Windows Azure team has released a new version of Windows Azure which is providing many excellent features. The new Windows Azure provides Web Sites which allows you to deploy up to 10 web sites for free in a multitenant shared environment and you can easily upgrade this web site to a private, dedicated virtual server when the traffic is grows. The Meet Windows Azure Fact Sheet provides the following information about a Windows Azure Web Site: Windows Azure Web Sites enable developers to easily build and deploy websites with support for multiple frameworks and popular open source applications, including ASP.NET, PHP and Node.js. With just a few clicks, developers can take advantage of Windows Azure’s global scale without having to worry about operations, servers or infrastructure. It is easy to deploy existing sites, if they run on Internet Information Services (IIS) 7, or to build new sites, with a free offer of 10 websites upon signup, with the ability to scale up as needed with reserved instances. Windows Azure Web Sites includes support for the following: Multiple frameworks including ASP.NET, PHP and Node.js Popular open source software apps including WordPress, Joomla!, Drupal, Umbraco and DotNetNuke Windows Azure SQL Database and MySQL databases Multiple types of developer tools and protocols including Visual Studio, Git, FTP, Visual Studio Team Foundation Services and Microsoft WebMatrix Signup to Windows and Enable Azure Web Sites You can signup for a 90 days free trial account in Windows Azure from here. After creating an account in Windows Azure, go to https://account.windowsazure.com/ , and select to preview features to view the available previews. In the Web Sites section of the preview features, click “try it now” which will enables the web sites feature Create Web Site in Windows Azure To create a web sites, login to the Windows Azure portal, and select Web Sites from and click New icon from the left corner Click WEB SITE, QUICK CREATE and put values for URL and REGION dropdown. You can see the all web sites from the dashboard of the Windows Azure portal Set up Git Publishing Select your web site from the dashboard, and select Set up Git publishing To enable Git publishing , you must give user name and password which will initialize a Git repository Clone Git Repository We can use GitHub for Windows to publish apps to non-GitHub repositories which is well explained by Phil Haack on his blog post. Here we are going to deploy the web site using GitHub for Windows. Let’s clone a Git repository using the Git Url which will be getting from the Windows Azure portal. Let’s copy the Git url and execute the “git clone” with the git url. You can use the Git Shell provided by GitHub for Windows. To get it, right on the GitHub for Windows, and select open shell here as shown in the below picture. When executing the Git Clone command, it will ask for a password where you have to give password which specified in the Windows Azure portal. After cloning the GIT repository, you can drag and drop the local Git repository folder to GitHub for Windows GUI. This will automatically add the Windows Azure Web Site repository onto GitHub for Windows where you can commit your changes and publish your web sites to Windows Azure. Publish the Web Site using GitHub for Windows We can add multiple framework level files including ASP.NET, PHP and Node.js, to the local repository folder can easily publish to Windows Azure from GitHub for Windows GUI. For this demo, let me just add a simple Node.js file named Server.js which handles few request handlers. 1: var http = require('http'); 2: var port=process.env.PORT; 3: var querystring = require('querystring'); 4: var utils = require('util'); 5: var url = require("url"); 6: 7: var server = http.createServer(function(req, res) { 8: switch (req.url) { //checking the request url 9: case '/': 10: homePageHandler (req, res); //handler for home page 11: break; 12: case '/register': 13: registerFormHandler (req, res);//hamdler for register 14: break; 15: default: 16: nofoundHandler (req, res);// handler for 404 not found 17: break; 18: } 19: }); 20: server.listen(port); 21: //function to display the html form 22: function homePageHandler (req, res) { 23: console.log('Request handler home was called.'); 24: res.writeHead(200, {'Content-Type': 'text/html'}); 25: var body = '<html>'+ 26: '<head>'+ 27: '<meta http-equiv="Content-Type" content="text/html; '+ 28: 'charset=UTF-8" />'+ 29: '</head>'+ 30: '<body>'+ 31: '<form action="/register" method="post">'+ 32: 'Name:<input type=text value="" name="name" size=15></br>'+ 33: 'Email:<input type=text value="" name="email" size=15></br>'+ 34: '<input type="submit" value="Submit" />'+ 35: '</form>'+ 36: '</body>'+ 37: '</html>'; 38: //response content 39: res.end(body); 40: } 41: //handler for Post request 42: function registerFormHandler (req, res) { 43: console.log('Request handler register was called.'); 44: var pathname = url.parse(req.url).pathname; 45: console.log("Request for " + pathname + " received."); 46: var postData = ""; 47: req.on('data', function(chunk) { 48: // append the current chunk of data to the postData variable 49: postData += chunk.toString(); 50: }); 51: req.on('end', function() { 52: // doing something with the posted data 53: res.writeHead(200, "OK", {'Content-Type': 'text/html'}); 54: // parse the posted data 55: var decodedBody = querystring.parse(postData); 56: // output the decoded data to the HTTP response 57: res.write('<html><head><title>Post data</title></head><body><pre>'); 58: res.write(utils.inspect(decodedBody)); 59: res.write('</pre></body></html>'); 60: res.end(); 61: }); 62: } 63: //Error handler for 404 no found 64: function nofoundHandler(req, res) { 65: console.log('Request handler nofound was called.'); 66: res.writeHead(404, {'Content-Type': 'text/plain'}); 67: res.end('404 Error - Request handler not found'); 68: } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } If there is any change in the local repository folder, GitHub for Windows will automatically detect the changes. In the above step, we have just added a Server.js file so that GitHub for Windows will detect the changes. Let’s commit the changes to the local repository before publishing the web site to Windows Azure. After committed the all changes, you can click publish button which will publish the all changes to Windows Azure repository. The following screen shot shows deployment history from the Windows Azure portal. GitHub for Windows is providing a sync button which can use for synchronizing between local repository and Windows Azure repository after making any commit on the local repository after any changes. Our web site is running after the deployment using Git Summary Windows Azure Web Sites lets the developers to easily build and deploy websites with support for multiple framework including ASP.NET, PHP and Node.js and can easily deploy the Web Sites using Visual Studio, Git, FTP, Visual Studio Team Foundation Services and Microsoft WebMatrix. In this demo, we have deployed a Node.js Web Site to Windows Azure using Git. We can use GitHub for Windows to publish apps to non-GitHub repositories and can use to publish Web SItes to Windows Azure.

Read the article

Find More Streaming TV Online with Clicker.tv

- by DigitalGeekery

Looking for a way to access more of your favorite TV Shows and other online entertainment? Today we’ll take a look at Clicker.tv which offers an awesome way to find tons of TV programs and movies. Clicker.tv Clicker.tv is an HTML5 web application that indexes both free and premium content from sources like Hulu, Netflix, Amazon, iTunes, and more. Some movies or episodes, such as those from Netflix and Amazon.com’s Video on Demand, will require viewers to have a membership, or pay a fee to access content. There is also a Clicker.tv app for Boxee. Navigation Navigating in Clicker.tv is rather easy with your keyboard. Directional Keys: navigate up, down, left, and right. Enter: make a selection Backspace: return to previous screen Escape: return to the Clicker.tv home screen. Note: You can also navigate through Clicker.tv with your PC remote. Recommended Browsers Firefox 3.6 + Safari 4.0 + Internet Explorer 8 + Google Chrome Note: You’ll need the latest version of Flash installed to play the majority of content. Earlier versions of the above browsers may work, but for full keyboard functionality, stick with the recommendations. Using Clicker.tv The first time you go to Clicker.tv, (link below) you’ll be met with a welcome screen and some helpful hints. Click Enter when finished. The Home screen feature Headliners, Trending Shows, and Trending Episodes. You can scroll through the different options and category links along the left side. The Search link pulls up an onscreen keyboard so you can enter search terms with a remote as well as a keyboard. Type in your search terms and matching items are displayed on the screen. You can also browse by a wide variety of categories. Select TV to browse only available TV programs. Or, browse only Movies in the movie category. There are also links for Web content and Music. Creating an Account You can access all Clicker.tv content without an account, but a Clicker account allows users to create playlists and subscribe to shows and have them automatically added to their playlist. You’ll need to go to Clicker.com and create an account. You’ll find the link at the upper right of the page. Enter a username, password and email address. There also an option to link with Facebook, or you can simply Skip this step. Go to Clicker.tv and sign in. You can manually type in your credentials or use the onscreen keyboard with your remote. Settings If you’d prefer not to display content from premium sites or Netflix, you can remove them through the Settings. Toggle Amazon, iTunes and Netflix on or off. Watching Episodes To watch an episode, select the image to begin playing from the default source, or select one of the other options. You can see in the example below that you can choose to watch the episode from Fox, Hulu, or Amazon Video on Demand. Your episode will then launch and begin playing from your chosen source. If you choose a premium content source such as iTunes or Amazon’s VOD, you’ll be taken to the Amazon’s website or iTunes and prompted to purchase the content. Playlists Once you’ve created an account and signed in, you can begin adding Shows to your playlist. Choose a series and select Add to Playlist. You’ll see in the example below that Family Guy has been Added and the number 142 is shown next to the playlist icon to indicate that 142 episodes has been added to your playlist. Underneath the listings for each episode in your playlist you can mark as Watched, or Remove individual episodes. You can also view the playlist or make any changes from the Clicker.com website. Click on “Playlist” on the top right of the Clicker.com site to access your playlists. You can select individual episodes from your playlists, remove them, or mark them as watched or unwatched. Clicker.TV and Boxee Boxee offers a Clicker.TV app that features a limited amount of the Clicker.TV content. You’ll find Clicker.TV located in the Boxee Apps Library. Select the Clicker App and then choose Start. From the Clicker App interface you can search or browse for available content. Select an episode you’d like to view… Then select play in the pop up window. You can also add it to your Boxee queue, share it, or add a shortcut, just as you can from other Boxee apps. When you click play your episode will launch and begin playing in Boxee. Conclusion Clicker.TV is currently still in Beta and has some limitations. Typical remotes won’t work completely in all external websites. So, you’ll still need a keyboard to be able to perform some operations such as switching to full screen mode. The Boxee app offers a more fully remote friendly environment, but unfortunately lacks a good portion of the Clicker.tv content. As with many content sites, availability of certain programming may be limited by your geographic location. Want to add Clicker.TV functionality to Windows Media Center? You can do so through the Boxee Integration for Windows 7 Media Center plug-in. Clicker.tv Clicker.com Similar Articles Productive Geek Tips Share Digital Media With Other Computers on a Home Network with Windows 7Stream Music and Video Over the Internet with Windows Media Player 12Listen to Online Radio with AntennaEnable Media Streaming in Windows Home Server to Windows Media PlayerNorton Internet Security 2010 [Review] TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Nice Websites To Watch TV Shows Online 24 Million Sites Windows Media Player Glass Icons (icons we like) How to Forecast Weather, without Gadgets Outlook Tools, one stop tweaking for any Outlook version Zoofs, find the most popular tweeted YouTube videos

Read the article

Creating HTML5 Offline Web Applications with ASP.NET

- by Stephen Walther

The goal of this blog entry is to describe how you can create HTML5 Offline Web Applications when building ASP.NET web applications. I describe the method that I used to create an offline Web application when building the JavaScript Reference application. You can read about the HTML5 Offline Web Application standard by visiting the following links: Offline Web Applications Firefox Offline Web Applications Safari Offline Web Applications Currently, the HTML5 Offline Web Applications feature works with all modern browsers with one important exception. You can use Offline Web Applications with Firefox, Chrome, and Safari (including iPhone Safari). Unfortunately, however, Internet Explorer does not support Offline Web Applications (not even IE 9). Why Build an HTML5 Offline Web Application? The official reason to build an Offline Web Application is so that you do not need to be connected to the Internet to use it. For example, you can use the JavaScript Reference Application when flying in an airplane, riding a subway, or hiding in a cave in Borneo. The JavaScript Reference Application works great on my iPhone even when I am completely disconnected from any network. The following screenshot shows the JavaScript Reference Application running on my iPhone when airplane mode is enabled (notice the little orange airplane): Admittedly, it is becoming increasingly difficult to find locations where you can’t get Internet access. A second, and possibly better, reason to create Offline Web Applications is speed. An Offline Web Application must be downloaded only once. After it gets downloaded, all of the files required by your Web application (HTML, CSS, JavaScript, Image) are stored persistently on your computer. Think of Offline Web Applications as providing you with a super browser cache. Normally, when you cache files in a browser, the files are cached on a file-by-file basis. For each HTML, CSS, image, or JavaScript file, you specify how long the file should remain in the cache by setting cache headers. Unlike the normal browser caching mechanism, the HTML5 Offline Web Application cache is used to specify a caching policy for an entire set of files. You use a manifest file to list the files that you want to cache and these files are cached until the manifest is changed. Another advantage of using the HTML5 offline cache is that the HTML5 standard supports several JavaScript events and methods related to the offline cache. For example, you can be notified in your JavaScript code whenever the offline application has been updated. You can use JavaScript methods, such as the ApplicationCache.update() method, to update the cache programmatically. Creating the Manifest File The HTML5 Offline Cache uses a manifest file to determine the files that get cached. Here’s what the manifest file looks like for the JavaScript Reference application: CACHE MANIFEST # v30 Default.aspx # Standard Script Libraries Scripts/jquery-1.4.4.min.js Scripts/jquery-ui-1.8.7.custom.min.js Scripts/jquery.tmpl.min.js Scripts/json2.js # App Scripts App_Scripts/combine.js App_Scripts/combine.debug.js # Content (CSS & images) Content/default.css Content/logo.png Content/ui-lightness/jquery-ui-1.8.7.custom.css Content/ui-lightness/images/ui-bg_glass_65_ffffff_1x400.png Content/ui-lightness/images/ui-bg_glass_100_f6f6f6_1x400.png Content/ui-lightness/images/ui-bg_highlight-soft_100_eeeeee_1x100.png Content/ui-lightness/images/ui-icons_222222_256x240.png Content/ui-lightness/images/ui-bg_glass_100_fdf5ce_1x400.png Content/ui-lightness/images/ui-bg_diagonals-thick_20_666666_40x40.png Content/ui-lightness/images/ui-bg_gloss-wave_35_f6a828_500x100.png Content/ui-lightness/images/ui-icons_ffffff_256x240.png Content/ui-lightness/images/ui-icons_ef8c08_256x240.png Content/browsers/c8.png Content/browsers/es3.png Content/browsers/es5.png Content/browsers/ff3_6.png Content/browsers/ie8.png Content/browsers/ie9.png Content/browsers/sf5.png NETWORK: Services/EntryService.svc http://superexpert.com/resources/JavaScriptReference/ A Cache Manifest file always starts with the line of text Cache Manifest. In the manifest above, all of the CSS, image, and JavaScript files required by the JavaScript Reference application are listed. For example, the Default.aspx ASP.NET page, jQuery library, JQuery UI library, and several images are listed. Notice that you can add comments to a manifest by starting a line with the hash character (#). I use comments in the manifest above to group JavaScript and image files. Finally, notice that there is a NETWORK: section of the manifest. You list any file that you do not want to cache (any file that requires network access) in this section. In the manifest above, the NETWORK: section includes the URL for a WCF Service named EntryService.svc. This service is called to get the JavaScript entries displayed by the JavaScript Reference. There are two important things that you need to be aware of when using a manifest file. First, all relative URLs listed in a manifest are resolved relative to the manifest file. The URLs listed in the manifest above are all resolved relative to the root of the application because the manifest file is located in the application root. Second, whenever you make a change to the manifest file, browsers will download all of the files contained in the manifest (all of them). For example, if you add a new file to the manifest then any browser that supports the Offline Cache standard will detect the change in the manifest and download all of the files listed in the manifest automatically. If you make changes to files in the manifest (for example, modify a JavaScript file) then you need to make a change in the manifest file in order for the new version of the file to be downloaded. The standard way of updating a manifest file is to include a comment with a version number. The manifest above includes a # v30 comment. If you make a change to a file then you need to modify the comment to be # v31 in order for the new file to be downloaded. When Are Updated Files Downloaded? When you make changes to a manifest, the changes are not reflected the very next time you open the offline application in your web browser. Your web browser will download the updated files in the background. This can be very confusing when you are working with JavaScript files. If you make a change to a JavaScript file, and you have cached the application offline, then the changes to the JavaScript file won’t appear when you reload the application. The HTML5 standard includes new JavaScript events and methods that you can use to track changes and make changes to the Application Cache. You can use the ApplicationCache.update() method to initiate an update to the application cache and you can use the ApplicationCache.swapCache() method to switch to the latest version of a cached application. My heartfelt recommendation is that you do not enable your application for offline storage until after you finish writing your application code. Otherwise, debugging the application can become a very confusing experience. Offline Web Applications versus Local Storage Be careful to not confuse the HTML5 Offline Web Application feature and HTML5 Local Storage (aka DOM storage) feature. The JavaScript Reference Application uses both features. HTML5 Local Storage enables you to store key/value pairs persistently. Think of Local Storage as a super cookie. I describe how the JavaScript Reference Application uses Local Storage to store the database of JavaScript entries in a separate blog entry. Offline Web Applications enable you to store static files persistently. Think of Offline Web Applications as a super cache. Creating a Manifest File in an ASP.NET Application A manifest file must be served with the MIME type text/cache-manifest. In order to serve the JavaScript Reference manifest with the proper MIME type, I added two files to the JavaScript Reference Application project: Manifest.txt – This text file contains the actual manifest file. Manifest.ashx – This generic handler sends the Manifest.txt file with the MIME type text/cache-manifest. Here’s the code for the generic handler: using System.Web; namespace JavaScriptReference { public class Manifest : IHttpHandler { public void ProcessRequest(HttpContext context) { context.Response.ContentType = "text/cache-manifest"; context.Response.WriteFile(context.Server.MapPath("Manifest.txt")); } public bool IsReusable { get { return false; } } } } The Default.aspx file contains a reference to the manifest. The opening HTML tag in the Default.aspx file looks like this: <html manifest="Manifest.ashx"> Notice that the HTML tag contains a manifest attribute that points to the Manifest.ashx generic handler. Internet Explorer simply ignores this attribute. Every other modern browser will download the manifest when the Default.aspx page is requested. Seeing the Offline Web Application in Action The experience of using an HTML5 Web Application is different with different browsers. When you first open the JavaScript Reference application with Firefox, you get the following warning: Notice that you are provided with the choice of whether you want to use the application offline or not. Browsers other than Firefox, such as Chrome and Safari, do not provide you with this choice. Chrome and Safari will create an offline cache automatically. If you click the Allow button then Firefox will download all of the files listed in the manifest. You can view the files contained in the Firefox offline application cache by typing about:cache in the Firefox address bar: You can view the actual items being cached by clicking the List Cache Entries link: The Offline Web Application experience is different in the case of Google Chrome. You can view the entries in the offline cache by opening the Developer Tools (hit Shift+CTRL+I), selecting the Storage tab, and selecting Application Cache: Notice that you view the status of the Application Cache. In the screen shot above, the status is UNCACHED which means that the files listed in the manifest have not been downloaded and cached yet. The different possible values for the status are included in the HTML5 Offline Web Application standard: UNCACHED – The Application Cache has not been initialized. IDLE – The Application Cache is not currently being updated. CHECKING – The Application Cache is being fetched and checked for updates. DOWNLOADING – The files in the Application Cache are being updated. UPDATEREADY – There is a new version of the Application. OBSOLETE – The contents of the Application Cache are obsolete. Summary In this blog entry, I provided a description of how you can use the HTML5 Offline Web Application feature in the context of an ASP.NET application. I described how this feature is used with the JavaScript Reference Application to store the entire application on a user’s computer. By taking advantage of this new feature of the HTML5 standard, you can improve the performance of your ASP.NET web applications by requiring users of your web application to download your application once and only once. Furthermore, you can enable users to take advantage of your applications anywhere -- regardless of whether or not they are connected to the Internet.

Read the article

WPF ComboBox Binding to non string object

- by Mike L

I'm using MVVM (MVVM Light Toolkit) and have a property on the view model which exposes a list of objects. The objects contain two properties, both strings, which correlate to an abbreviation and a description. I want the ComboBox to expose the pairing as "abbreviation - description". If I use a data template, it does this easily. I have another property on the view model which represents the object that should display as selected -- the chosen item in the ComboBox. I'm binding the ItemsSource to the list, as it represents the universe of available selections, and am trying to bind the SelectedItem to this object. I'm killing myself trying to figure out why I can't get it to work, and feeling more like a fraud by the hour. In trying to learn why this works, I created the same approach with just a list of strings, and a selected string. This works perfectly. So, it clearly has something to do with the typing... perhaps something in choosing equality? Or perhaps it has to do with the data template? Here is the XAML: <Window x:Class="MvvmLight1.MainWindow" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="MainWindow" Height="300" Width="300" DataContext="{Binding Main, Source={StaticResource Locator}}"> <Window.Resources> <ResourceDictionary> <ResourceDictionary.MergedDictionaries> <ResourceDictionary Source="Skins/MainSkin.xaml" /> </ResourceDictionary.MergedDictionaries> <DataTemplate x:Key="DataTemplate1"> <StackPanel Orientation="Horizontal"> <TextBlock TextWrapping="Wrap" Text="{Binding CourtCode}"/> <TextBlock TextWrapping="Wrap" Text=" - "/> <TextBlock TextWrapping="Wrap" Text="{Binding CourtDescription}"/> </StackPanel> </DataTemplate> </ResourceDictionary> </Window.Resources> <Grid x:Name="LayoutRoot"> <ComboBox x:Name="cmbAbbrevDescriptions" Height="35" Margin="25,75,25,25" VerticalAlignment="Top" ItemsSource="{Binding Codes}" ItemTemplate="{DynamicResource DataTemplate1}" SelectedItem="{Binding selectedCode}" /> <ComboBox x:Name="cmbStrings" Height="35" Margin="25" VerticalAlignment="Top" ItemsSource="{Binding strs}" SelectedItem="{Binding selectedStr}"/> </Grid> </Window> And, if helpful, here is the ViewModel: using GalaSoft.MvvmLight; using MvvmLight1.Model; using System.Collections.Generic; namespace MvvmLight1.ViewModel { public class MainViewModel : ViewModelBase { public const string CodesPropertyName = "Codes"; private List<Court> _codes = null; public List<Court> Codes { get { return _codes; } set { if (_codes == value) { return; } var oldValue = _codes; _codes = value; // Update bindings and broadcast change using GalaSoft.Utility.Messenging RaisePropertyChanged(CodesPropertyName, oldValue, value, true); } } public const string selectedCodePropertyName = "selectedCode"; private Court _selectedCode = null; public Court selectedCode { get { return _selectedCode; } set { if (_selectedCode == value) { return; } var oldValue = _selectedCode; _selectedCode = value; // Update bindings and broadcast change using GalaSoft.Utility.Messenging RaisePropertyChanged(selectedCodePropertyName, oldValue, value, true); } } public const string strsPropertyName = "strs"; private List<string> _strs = null; public List<string> strs { get { return _strs; } set { if (_strs == value) { return; } var oldValue = _strs; _strs = value; // Update bindings and broadcast change using GalaSoft.Utility.Messenging RaisePropertyChanged(strsPropertyName, oldValue, value, true); } } public const string selectedStrPropertyName = "selectedStr"; private string _selectedStr = ""; public string selectedStr { get { return _selectedStr; } set { if (_selectedStr == value) { return; } var oldValue = _selectedStr; _selectedStr = value; // Update bindings and broadcast change using GalaSoft.Utility.Messenging RaisePropertyChanged(selectedStrPropertyName, oldValue, value, true); } } /// <summary> /// Initializes a new instance of the MainViewModel class. /// </summary> public MainViewModel() { Codes = new List<Court>(); Court code1 = new Court(); code1.CourtCode = "ABC"; code1.CourtDescription = "A Court"; Court code2 = new Court(); code2.CourtCode = "DEF"; code2.CourtDescription = "Second Court"; Codes.Add(code1); Codes.Add(code2); Court code3 = new Court(); code3.CourtCode = "DEF"; code3.CourtDescription = "Second Court"; selectedCode = code3; selectedStr = "Hello"; strs = new List<string>(); strs.Add("Goodbye"); strs.Add("Hello"); strs.Add("Ciao"); } } } And here is the ridiculously trivial class that is being exposed: using System; using System.Collections.Generic; using System.Linq; using System.Text; namespace MvvmLight1.Model { public class Court { public string CourtCode { get; set; } public string CourtDescription { get; set; } } } Thanks!

Read the article

Connecting Linux to WatchGuard Firebox SSL (OpenVPN client)

Recently, I got a new project assignment that requires to connect permanently to the customer's network through VPN. They are using a so-called SSL VPN. As I am using OpenVPN since more than 5 years within my company's network I was quite curious about their solution and how it would actually be different from OpenVPN. Well, short version: It is a disguised version of OpenVPN. Unfortunately, the company only offers a client for Windows and Mac OS which shouldn't bother any Linux user after all. OpenVPN is part of every recent distribution and can be activated in a couple of minutes - both client as well as server (if necessary). WatchGuard Firebox SSL - About dialog Borrowing some files from a Windows client installation Initially, I didn't know about the product, so therefore I went through the installation on Windows 8. No obstacles (and no restart despite installation of TAP device drivers!) here and the secured VPN channel was up and running in less than 2 minutes or so. Much appreciated from both parties - customer and me. Of course, this whole client package and my long year approved and stable installation ignited my interest to have a closer look at the WatchGuard client. Compared to the original OpenVPN client (okay, I have to admit this is years ago) this commercial product is smarter in terms of file locations during installation. You'll be able to access the configuration and key files below your roaming application data folder. To get there, simply enter '%AppData%\WatchGuard\Mobile VPN' in your Windows/File Explorer and confirm with Enter/Return. This will display the following files: Application folder below user profile with configuration and certificate files From there we are going to borrow four files, namely: ca.crt client.crt client.ovpn client.pem and transfer them to the Linux system. You might also be able to isolate those four files from a Mac OS client. Frankly, I'm just too lazy to run the WatchGuard client installation on a Mac mini only to find the folder location, and I'm going to describe why a little bit further down this article. I know that you can do that! Feedback in the comment section is appreciated. Configuration of OpenVPN (console) Depending on your distribution the following steps might be a little different but in general you should be able to get the important information from it. I'm going to describe the steps in Ubuntu 13.04 (Raring Ringtail). As usual, there are two possibilities to achieve your goal: console and UI. Let's what it is necessary to be done. First of all, you should ensure that you have OpenVPN installed on your system. Open your favourite terminal application and run the following statement: $ sudo apt-get install openvpn network-manager-openvpn network-manager-openvpn-gnome Just to be on the safe side. The four above mentioned files from your Windows machine could be copied anywhere but either you place them below your own user directory or you put them (as root) below the default directory: /etc/openvpn At this stage you would be able to do a test run already. Just in case, run the following command and check the output (it's the similar information you would get from the 'View Logs...' context menu entry in Windows: $ sudo openvpn --config client.ovpn Pay attention to the correct path to your configuration and certificate files. OpenVPN will ask you to enter your Auth Username and Auth Password in order to establish the VPN connection, same as the Windows client. Remote server and user authentication to establish the VPN Please complete the test run and see whether all went well. You can disconnect pressing Ctrl+C. Simplifying your life - authentication file In my case, I actually set up the OpenVPN client on my gateway/router. This establishes a VPN channel between my network and my client's network and allows me to switch machines easily without having the necessity to install the WatchGuard client on each and every machine. That's also very handy for my various virtualised Windows machines. Anyway, as the client configuration, key and certificate files are located on a headless system somewhere under the roof, it is mandatory to have an automatic connection to the remote site. For that you should first change the file extension '.ovpn' to '.conf' which is the default extension on Linux systems for OpenVPN, and then open the client configuration file in order to extend an existing line. $ sudo mv client.ovpn client.conf $ sudo nano client.conf You should have a similar content to this one here: dev tunclientproto tcp-clientca ca.crtcert client.crtkey client.pemtls-remote "/O=WatchGuard_Technologies/OU=Fireware/CN=Fireware_SSLVPN_Server"remote-cert-eku "TLS Web Server Authentication"remote 1.2.3.4 443persist-keypersist-tunverb 3mute 20keepalive 10 60cipher AES-256-CBCauth SHA1float 1reneg-sec 3660nobindmute-replay-warningsauth-user-pass auth.txt Note: I changed the IP address of the remote directive above (which should be obvious, right?). Anyway, the required change is marked in red and we have to create a new authentication file 'auth.txt'. You can give the directive 'auth-user-pass' any file name you'd like to. Due to my existing OpenVPN infrastructure my setup differs completely from the above written content but for sake of simplicity I just keep it 'as-is'. Okay, let's create this file 'auth.txt' $ sudo nano auth.txt and just put two lines of information in it - username on the first, and password on the second line, like so: myvpnusernameverysecretpassword Store the file, change permissions, and call openvpn with your configuration file again: $ sudo chmod 0600 auth.txt $ sudo openvpn --config client.conf This should now work without being prompted to enter username and password. In case that you placed your files below the system-wide location /etc/openvpn you can operate your VPNs also via service command like so: $ sudo service openvpn start client $ sudo service openvpn stop client Using Network Manager For newer Linux users or the ones with 'console-phobia' I'm going to describe now how to use Network Manager to setup the OpenVPN client. For this move your mouse to the systray area and click on Network Connections => VPN Connections => Configure VPNs... which opens your Network Connections dialog. Alternatively, use the HUD and enter 'Network Connections'. Network connections overview in Ubuntu Click on 'Add' button. On the next dialog select 'Import a saved VPN configuration...' from the dropdown list and click on 'Create...' Choose connection type to import VPN configuration Now you navigate to your folder where you put the client files from the Windows system and you open the 'client.ovpn' file. Next, on the tab 'VPN' proceed with the following steps (directives from the configuration file are referred): General Check the IP address of Gateway ('remote' - we used 1.2.3.4 in this setup) Authentication Change Type to 'Password with Certificates (TLS)' ('auth-pass-user') Enter User name to access your client keys (Auth Name: myvpnusername) Enter Password (Auth Password: verysecretpassword) and choose your password handling Browse for your User Certificate ('cert' - should be pre-selected with client.crt) Browse for your CA Certificate ('ca' - should be filled as ca.crt) Specify your Private Key ('key' - here: client.pem) Then click on the 'Advanced...' button and check the following values: Use custom gateway port: 443 (second value of 'remote' directive) Check the selected value of Cipher ('cipher') Check HMAC Authentication ('auth') Enter the Subject Match: /O=WatchGuard_Technologies/OU=Fireware/CN=Fireware_SSLVPN_Server ('tls-remote') Finally, you have to confirm and close all dialogs. You should be able to establish your OpenVPN-WatchGuard connection via Network Manager. For that, click on the 'VPN Connections => client' entry on your Network Manager in the systray. It is advised that you keep an eye on the syslog to see whether there are any problematic issues that would require some additional attention. Advanced topic: routing As stated above, I'm running the 'WatchGuard client for Linux' on my head-less server, and since then I'm actually establishing a secure communication channel between two networks. In order to enable your network clients to get access to machines on the remote side there are two possibilities to enable that: Proper routing on both sides of the connection which enables both-direction access, or Network masquerading on the 'client side' of the connection Following, I'm going to describe the second option a little bit more in detail. The Linux system that I'm using is already configured as a gateway to the internet. I won't explain the necessary steps to do that, and will only focus on the additional tweaks I had to do. You can find tons of very good instructions and tutorials on 'How to setup a Linux gateway/router' - just use Google. OK, back to the actual modifications. First, we need to have some information about the network topology and IP address range used on the 'other' side. We can get this very easily from /var/log/syslog after we established the OpenVPN channel, like so: $ sudo tail -n20 /var/log/syslog Or if your system is quite busy with logging, like so: $ sudo less /var/log/syslog | grep ovpn The output should contain PUSH received message similar to the following one: Jul 23 23:13:28 ios1 ovpn-client[789]: PUSH: Received control message: 'PUSH_REPLY,topology subnet,route 192.168.1.0 255.255.255.0,dhcp-option DOMAIN ,route-gateway 192.168.6.1,topology subnet,ping 10,ping-restart 60,ifconfig 192.168.6.2 255.255.255.0' The interesting part for us is the route command which I highlighted already in the sample PUSH_REPLY. Depending on your remote server there might be multiple networks defined (172.16.x.x and/or 10.x.x.x). Important: The IP address range on both sides of the connection has to be different, otherwise you will have to shuffle IPs or increase your the netmask. {loadposition content_adsense} After the VPN connection is established, we have to extend the rules for iptables in order to route and masquerade IP packets properly. I created a shell script to take care of those steps: #!/bin/sh -eIPTABLES=/sbin/iptablesDEV_LAN=eth0DEV_VPNS=tun+VPN=192.168.1.0/24 $IPTABLES -A FORWARD -i $DEV_LAN -o $DEV_VPNS -d $VPN -j ACCEPT$IPTABLES -A FORWARD -i $DEV_VPNS -o $DEV_LAN -s $VPN -j ACCEPT$IPTABLES -t nat -A POSTROUTING -o $DEV_VPNS -d $VPN -j MASQUERADE I'm using the wildcard interface 'tun+' because I have multiple client configurations for OpenVPN on my server. In your case, it might be sufficient to specify device 'tun0' only. Simplifying your life - automatic connect on boot Now, that the client connection works flawless, configuration of routing and iptables is okay, we might consider to add another 'laziness' factor into our setup. Due to kernel updates or other circumstances it might be necessary to reboot your system. Wouldn't it be nice that the VPN connections are established during the boot procedure? Yes, of course it would be. To achieve this, we have to configure OpenVPN to automatically start our VPNs via init script. Let's have a look at the responsible 'default' file and adjust the settings accordingly. $ sudo nano /etc/default/openvpn Which should have a similar content to this: # This is the configuration file for /etc/init.d/openvpn## Start only these VPNs automatically via init script.# Allowed values are "all", "none" or space separated list of# names of the VPNs. If empty, "all" is assumed.# The VPN name refers to the VPN configutation file name.# i.e. "home" would be /etc/openvpn/home.conf#AUTOSTART="all"#AUTOSTART="none"#AUTOSTART="home office"## ... more information which remains unmodified ... With the OpenVPN client configuration as described above you would either set AUTOSTART to "all" or to "client" to enable automatic start of your VPN(s) during boot. You should also take care that your iptables commands are executed after the link has been established, too. You can easily test this configuration without reboot, like so: $ sudo service openvpn restart Enjoy stable VPN connections between your Linux system(s) and a WatchGuard Firebox SSL remote server. Cheers, JoKi

Read the article

How to Reuse Your Old Wi-Fi Router as a Network Switch

- by Jason Fitzpatrick

Just because your old Wi-Fi router has been replaced by a newer model doesn’t mean it needs to gather dust in the closet. Read on as we show you how to take an old and underpowered Wi-Fi router and turn it into a respectable network switch (saving your $20 in the process). Image by mmgallan. Why Do I Want To Do This? Wi-Fi technology has changed significantly in the last ten years but Ethernet-based networking has changed very little. As such, a Wi-Fi router with 2006-era guts is lagging significantly behind current Wi-Fi router technology, but the Ethernet networking component of the device is just as useful as ever; aside from potentially being only 100Mbs instead of 1000Mbs capable (which for 99% of home applications is irrelevant) Ethernet is Ethernet. What does this matter to you, the consumer? It means that even though your old router doesn’t hack it for your Wi-Fi needs any longer the device is still a perfectly serviceable (and high quality) network switch. When do you need a network switch? Any time you want to share an Ethernet cable among multiple devices, you need a switch. For example, let’s say you have a single Ethernet wall jack behind your entertainment center. Unfortunately you have four devices that you want to link to your local network via hardline including your smart HDTV, DVR, Xbox, and a little Raspberry Pi running XBMC. Instead of spending $20-30 to purchase a brand new switch of comparable build quality to your old Wi-Fi router it makes financial sense (and is environmentally friendly) to invest five minutes of your time tweaking the settings on the old router to turn it from a Wi-Fi access point and routing tool into a network switch–perfect for dropping behind your entertainment center so that your DVR, Xbox, and media center computer can all share an Ethernet connection. What Do I Need? For this tutorial you’ll need a few things, all of which you likely have readily on hand or are free for download. To follow the basic portion of the tutorial, you’ll need the following: 1 Wi-Fi router with Ethernet ports 1 Computer with Ethernet jack 1 Ethernet cable For the advanced tutorial you’ll need all of those things, plus: 1 copy of DD-WRT firmware for your Wi-Fi router We’re conducting the experiment with a Linksys WRT54GL Wi-Fi router. The WRT54 series is one of the best selling Wi-Fi router series of all time and there’s a good chance a significant number of readers have one (or more) of them stuffed in an office closet. Even if you don’t have one of the WRT54 series routers, however, the principles we’re outlining here apply to all Wi-Fi routers; as long as your router administration panel allows the necessary changes you can follow right along with us. A quick note on the difference between the basic and advanced versions of this tutorial before we proceed. Your typical Wi-Fi router has 5 Ethernet ports on the back: 1 labeled “Internet”, “WAN”, or a variation thereof and intended to be connected to your DSL/Cable modem, and 4 labeled 1-4 intended to connect Ethernet devices like computers, printers, and game consoles directly to the Wi-Fi router. When you convert a Wi-Fi router to a switch, in most situations, you’ll lose two port as the “Internet” port cannot be used as a normal switch port and one of the switch ports becomes the input port for the Ethernet cable linking the switch to the main network. This means, referencing the diagram above, you’d lose the WAN port and LAN port 1, but retain LAN ports 2, 3, and 4 for use. If you only need to switch for 2-3 devices this may be satisfactory. However, for those of you that would prefer a more traditional switch setup where there is a dedicated WAN port and the rest of the ports are accessible, you’ll need to flash a third-party router firmware like the powerful DD-WRT onto your device. Doing so opens up the router to a greater degree of modification and allows you to assign the previously reserved WAN port to the switch, thus opening up LAN ports 1-4. Even if you don’t intend to use that extra port, DD-WRT offers you so many more options that it’s worth the extra few steps. Preparing Your Router for Life as a Switch Before we jump right in to shutting down the Wi-Fi functionality and repurposing your device as a network switch, there are a few important prep steps to attend to. First, you want to reset the router (if you just flashed a new firmware to your router, skip this step). Following the reset procedures for your particular router or go with what is known as the “Peacock Method” wherein you hold down the reset button for thirty seconds, unplug the router and wait (while still holding the reset button) for thirty seconds, and then plug it in while, again, continuing to hold down the rest button. Over the life of a router there are a variety of changes made, big and small, so it’s best to wipe them all back to the factory default before repurposing the router as a switch. Second, after resetting, we need to change the IP address of the device on the local network to an address which does not directly conflict with the new router. The typical default IP address for a home router is 192.168.1.1; if you ever need to get back into the administration panel of the router-turned-switch to check on things or make changes it will be a real hassle if the IP address of the device conflicts with the new home router. The simplest way to deal with this is to assign an address close to the actual router address but outside the range of addresses that your router will assign via the DHCP client; a good pick then is 192.168.1.2. Once the router is reset (or re-flashed) and has been assigned a new IP address, it’s time to configure it as a switch. Basic Router to Switch Configuration If you don’t want to (or need to) flash new firmware onto your device to open up that extra port, this is the section of the tutorial for you: we’ll cover how to take a stock router, our previously mentioned WRT54 series Linksys, and convert it to a switch. Hook the Wi-Fi router up to the network via one of the LAN ports (consider the WAN port as good as dead from this point forward, unless you start using the router in its traditional function again or later flash a more advanced firmware to the device, the port is officially retired at this point). Open the administration control panel via web browser on a connected computer. Before we get started two things: first, anything we don’t explicitly instruct you to change should be left in the default factory-reset setting as you find it, and two, change the settings in the order we list them as some settings can’t be changed after certain features are disabled. To start, let’s navigate to Setup ->Basic Setup. Here you need to change the following things: Local IP Address: [different than the primary router, e.g. 192.168.1.2] Subnet Mask: [same as the primary router, e.g. 255.255.255.0] DHCP Server: Disable Save with the “Save Settings” button and then navigate to Setup -> Advanced Routing: Operating Mode: Router This particular setting is very counterintuitive. The “Operating Mode” toggle tells the device whether or not it should enable the Network Address Translation (NAT) feature. Because we’re turning a smart piece of networking hardware into a relatively dumb one, we don’t need this feature so we switch from Gateway mode (NAT on) to Router mode (NAT off). Our next stop is Wireless -> Basic Wireless Settings: Wireless SSID Broadcast: Disable Wireless Network Mode: Disabled After disabling the wireless we’re going to, again, do something counterintuitive. Navigate to Wireless -> Wireless Security and set the following parameters: Security Mode: WPA2 Personal WPA Algorithms: TKIP+AES WPA Shared Key: [select some random string of letters, numbers, and symbols like JF#d$di!Hdgio890] Now you may be asking yourself, why on Earth are we setting a rather secure Wi-Fi configuration on a Wi-Fi router we’re not going to use as a Wi-Fi node? On the off chance that something strange happens after, say, a power outage when your router-turned-switch cycles on and off a bunch of times and the Wi-Fi functionality is activated we don’t want to be running the Wi-Fi node wide open and granting unfettered access to your network. While the chances of this are next-to-nonexistent, it takes only a few seconds to apply the security measure so there’s little reason not to. Save your changes and navigate to Security ->Firewall. Uncheck everything but Filter Multicast Firewall Protect: Disable At this point you can save your changes again, review the changes you’ve made to ensure they all stuck, and then deploy your “new” switch wherever it is needed. Advanced Router to Switch Configuration For the advanced configuration, you’ll need a copy of DD-WRT installed on your router. Although doing so is an extra few steps, it gives you a lot more control over the process and liberates an extra port on the device. Hook the Wi-Fi router up to the network via one of the LAN ports (later you can switch the cable to the WAN port). Open the administration control panel via web browser on the connected computer. Navigate to the Setup -> Basic Setup tab to get started. In the Basic Setup tab, ensure the following settings are adjusted. The setting changes are not optional and are required to turn the Wi-Fi router into a switch. WAN Connection Type: Disabled Local IP Address: [different than the primary router, e.g. 192.168.1.2] Subnet Mask: [same as the primary router, e.g. 255.255.255.0] DHCP Server: Disable In addition to disabling the DHCP server, also uncheck all the DNSMasq boxes as the bottom of the DHCP sub-menu. If you want to activate the extra port (and why wouldn’t you), in the WAN port section: Assign WAN Port to Switch [X] At this point the router has become a switch and you have access to the WAN port so the LAN ports are all free. Since we’re already in the control panel, however, we might as well flip a few optional toggles that further lock down the switch and prevent something odd from happening. The optional settings are arranged via the menu you find them in. Remember to save your settings with the save button before moving onto a new tab. While still in the Setup -> Basic Setup menu, change the following: Gateway/Local DNS : [IP address of primary router, e.g. 192.168.1.1] NTP Client : Disable The next step is to turn off the radio completely (which not only kills the Wi-Fi but actually powers the physical radio chip off). Navigate to Wireless -> Advanced Settings -> Radio Time Restrictions: Radio Scheduling: Enable Select “Always Off” There’s no need to create a potential security problem by leaving the Wi-Fi radio on, the above toggle turns it completely off. Under Services -> Services: DNSMasq : Disable ttraff Daemon : Disable Under the Security -> Firewall tab, uncheck every box except “Filter Multicast”, as seen in the screenshot above, and then disable SPI Firewall. Once you’re done here save and move on to the Administration tab. Under Administration -> Management: Info Site Password Protection : Enable Info Site MAC Masking : Disable CRON : Disable 802.1x : Disable Routing : Disable After this final round of tweaks, save and then apply your settings. Your router has now been, strategically, dumbed down enough to plod along as a very dependable little switch. Time to stuff it behind your desk or entertainment center and streamline your cabling.

Read the article

Infragistics UltraWebTab

- by user354089

Im using Infragistcs UltraWebTab. The code is shown below ` <div class="tab-content"> <asp:Panel ID="PnlGeneral" runat="server"> <table width="100%" border="0" cellspacing="0" cellpadding="0" class="tab-list"> <tr> <td style="border-bottom-color: White"> <asp:Label ID="LblErrors" runat="server" CssClass="ErrorMessage1"></asp:Label> <asp:Label ID="LblSuccessMsg" runat="server" CssClass="SuccessMessage1"></asp:Label> </td> </tr> <tr> <td> <table cellpadding="0" cellspacing="0" width="100%" border="0" class="tab-list"> <tr> <th width="205" class="FormLabel1"> Campaign Name <span class="ErrorMessage">*</span> </th> <td width="80%"> <asp:TextBox ID="TxtCampaignName" runat="server" CssClass="TextBox1"></asp:TextBox> </td> </tr> <tr> <th width="205" class="FormLabel1"> CRM Name <span class="ErrorMessage">*</span> </th> <td width="80%"> <asp:TextBox ID="TxtCRMName" runat="server" CssClass="TextBox1"></asp:TextBox> </td> </tr> <tr> <th class="FormLabel1"> Campaign Type <span class="ErrorMessage">*</span> </th> <td> <asp:DropDownList ID="DDLCampaignType" runat="server" CssClass="TextBox1" AutoPostBack="true" Width="117px" OnSelectedIndexChanged="DDLCampaignType_SelectedIndexChanged"> </asp:DropDownList> </td> </tr> <tr visible="false" id="trCompanyRow" runat="server"> <th class="FormLabel1"> Company <span class="ErrorMessage">*</span> </th> <td> <table cellpadding="0" cellspacing="0" border="0" width="100%"> <tr> <td class="style2" style="border-bottom-color: White"> <asp:DropDownList ID="DDLCompany" runat="server" CssClass="TextBox1" Width="117px" OnSelectedIndexChanged="DDLCompany_SelectedIndexChanged"> </asp:DropDownList> </td> <td class="style3" style="border-bottom-color: White"> <asp:LinkButton ID="btnlnknewCompany" runat="server" Style="font-size: 100%;" Text="Add New" OnClick="btnlnknewCompany_Click"></asp:LinkButton> </td> <td style="border-bottom-color: White"> <table cellpadding="0" cellspacing="0" border="0" width="100%" id="tdNewComapny" visible="false" runat="server"> <tr> <td class="style4" style="border-bottom-color: White"> <asp:TextBox ID="txtCompanyName" runat="server"></asp:TextBox> </td> <td style="border-bottom-color: White"> <asp:Button ID="btnCompanyAdd" runat="server" CssClass="btn1" Height="20px" Text="Add" Width="25%" OnClick="btnCompanyAdd_Click" /> </td> </tr> </table> </td> </tr> </table> </td> </tr> <tr id="trBannerImage" runat="server" visible="false"> <th class="FormLabel1"> Banner Image <span class="ErrorMessage">*</span> </th> <td> <asp:FileUpload ID="FileUploadBannerImage" runat="server" ToolTip="Add images for banner" /> </td> </tr> <tr> <th class="FormLabel1"> Start Date <span class="ErrorMessage">*</span> </th> <td> <asp:TextBox ID="TxtStartDate" runat="server" CssClass="TextBox1"></asp:TextBox><rjs:PopCalendar ID="CalStartDate" runat="server" Control="TxtStartDate" Format="dd mm yyyy" ShowErrorMessage="false" />  dd-mm-yyyy </td> </tr> <tr> <th class="FormLabel1"> End Date <span class="ErrorMessage">*</span> </th> <td> <asp:TextBox ID="TxtEndDate" runat="server" CssClass="TextBox1"></asp:TextBox><rjs:PopCalendar ID="CalEndDate" runat="server" Control="TxtEndDate" Format="dd mm yyyy" ShowErrorMessage="false" />  dd-mm-yyyy </td> </tr> <tr> <th class="FormLabel1"> Enabled? </th> <td> <asp:CheckBox ID="ChkEnabled" runat="server" /> </td> </tr> <tr style="border-bottom-color: White" id="tblVerificationFields" visible="false" runat="server"> <th style="border-bottom-color: White"> Company's Verification Fields </th> <td style="border-bottom-color: White"> <table border="0" cellspacing="0" cellpadding="0" class="tab-form" width="100%"> <tr> <td colspan="3" align="center"> <br /> <p> <label style="font-size: 14px; font-weight: bold; text-align: center;"> Select from existing verification fields below</label></p> </td> </tr> <tr> <td colspan="2"> <asp:Repeater ID="RptrVeriFieldsParamType" runat="server"> <HeaderTemplate> <table border="0" cellpadding="0" cellspacing="0" class="tab-grid" style="border: 0px"> <tr> <th> </th> <th> Field Name </th> <th> Type </th> <th> </th> </tr> </HeaderTemplate> <ItemTemplate> <tr> <td style="border-bottom-color: White"> <asp:CheckBox ID="RptrChkVeriFields" runat="server" /> </td> <td style="border-bottom-color: White"> <asp:Label ID="RptrFieldName" runat="server" Text='<%# Eval("FieldName") %>'> </asp:Label> </td> <td style="border-bottom-color: White"> <asp:Label ID="RptrParamterTypeName" runat="server" Text='<%# Eval("PARAMETERTYPENAME") %>'> </asp:Label> </td> <td> <asp:Label ID="RptrHdnFieldId" runat="server" Text='<%# Eval("FIELDID") %>' Visible="false"></asp:Label> </td> </tr> </ItemTemplate> <FooterTemplate> </table> </FooterTemplate> </asp:Repeater> </td> </tr> <tr> <td style="border-bottom-color: White"> </td> </tr> <tr> <td> <table border="0" cellpadding="0" cellspacing="0" width="100%" runat="server"> <tr> <td colspan="6" style="border-bottom-color: White" align="center"> <br /> <p> <label style="font-size: 14px; font-weight: bold; text-align: center; width: 100%;"> Or Add New verification field</label> </p> </td> </tr> <tr id="trVerifcationFields" runat="server" visible="false"> <th style="border-bottom-color: White" width="110px"> <strong>Verification Name</strong> </th> <td style="border-bottom-color: White" width="50px"> <asp:TextBox ID="TxtVeriField" runat="server"> </asp:TextBox> </td> <th style="border-bottom-color: White" width="100px"> <strong>Parameter Type</strong> </th> <td style="border-bottom-color: White" width="100px"> <asp:DropDownList ID="DDLParameterType" runat="server"> </asp:DropDownList> </td> <th> </th> <td align="left" style="border-bottom-color: White"> <asp:Button ID="BtnAddVeriField" runat="server" CssClass="btn1" Height="20px" Text="Add" OnClick="BtnAddVeriField_Click" Width="75%" /> </td> </tr> </table> </td> </tr> </table> </td> </tr> </table> </td> </tr> <tr> <td> <table cellpadding="0" cellspacing="0" width="100%" border="0" class="tab-list"> <tr align="right"> <td> </td> <td align="right" class="tab-list"> <asp:Button runat="server" ID="Next" Visible="true" Text="Next >" CssClass="btn" /> </td> </tr> </table> </td> </tr> </table> </asp:Panel> </div> </ContentTemplate> </igtab:Tab> <igtab:Tab Text="CRM Deals (Step-2)" Key="Tab2"> <ContentTemplate> <div style="clear: both"> </div> <div class="tab-content"> <asp:Panel ID="PnlCRMDeals" runat="server" ScrollBars="Vertical" Height="500px"> <table width="100%" border="0" cellspacing="0" cellpadding="0" class="tab-list"> <tr> <td> <asp:GridView ID="GridDeals" AutoGenerateColumns="False" runat="server" BorderStyle="none" BorderWidth="0" CellPadding="0" CellSpacing="0" GridLines="None" ShowFooter="false" HorizontalAlign="Left" CssClass="tab-grid" Width="100%"> <HeaderStyle CssClass="header" HorizontalAlign="Center" /> <PagerStyle CssClass="pager" /> <AlternatingRowStyle CssClass="odd" /> <Columns> <asp:TemplateField> <ItemStyle Width="5%" /> <ItemTemplate> <asp:CheckBox ID="ChkDeals" runat="server" Visible="true" /> </ItemTemplate> </asp:TemplateField> <asp:TemplateField HeaderText="Deal Name"> <ItemStyle Width="25%" /> <ItemTemplate> <asp:Label ID="DealName" runat="server" Text='<%# Eval("DealName") %>' /> </ItemTemplate> </asp:TemplateField> <asp:TemplateField HeaderText="Name in CRM"> <ItemTemplate> <asp:Label ID="CRMDealName" runat="server" Text='<%# Eval("CRM_NAME") %>' /> </ItemTemplate> </asp:TemplateField> <asp:TemplateField HeaderText="Deal Code"> <ItemTemplate> <asp:Label ID="PartNum" runat="server" Text='<%# Eval("PARTNUM") %>' /> </ItemTemplate> </asp:TemplateField> </Columns> </asp:GridView> </td> </tr> </table> </asp:Panel> </div> </ContentTemplate> </igtab:Tab> ` The problem im facing is after the "BtnAddVeriField" add button is clicked the Panel for the next tab gets displayed below the first tab's Panel. Furthermore, that Add button is not displayed as well.

Read the article

Easily use google maps, openstreet maps etc offline.

- by samkea

I did it and i am going to explain step by step. The explanatination may appear long but its simple if you follow. Note: All the softwares i have used are the latest and i have packaged them and provided them in the link below. I use Nokia N96 1) RootSign smartComGPS and install it on your phone(i havent provided the signer so that u wuld do some little work. i used Secman' rootsign). 2) Install Universal Maps Downloader, SmartCom OGF2 converter and OziExplorer 3.95.4s on my PC. a) UMD is used to download map tiles from any map source like googlemaps,opensourcemaps etc... and also combine the tiles into an image file like png,jpg,bmp etc... b) SmartCom OGF2 converter is used to convert the image file into a format usable on your mobile phone. c) OziExplorer will help you to calibrate the usable map file so that it can be used with GPS on your mobile phone without the use of internet. 3) Go to google maps or where u pick your maps and pan to the area of your interest. Zoom the map to at least 15 or 16 zoom level where you can see your area clearly and the streets. 4) copy this script in a notepad file and save it on your desktop: javascript:void(prompt('',gApplication.getMap().ge tCenter())); 5) Open the universal maps downloader. You will notice that you are required to add the: left longitude, right longitude,top latitude, bottom latitude. 6) On your map in google maps, doubleclick on the your prefered to most middle point. you will notice that the map will center in that area. 7) copy the script and paste it in the address bar then press enter. You will notice that a dialog with your (top latitude) and longitude respectively pops up. 8) copy the top latitude ONLY and paste it in the corresponding textbox in the UMD. 9) repeat steps 6-7 for the botton latitude. 10)repeat steps 6-7 for left longitude and right longitude too, but u have to copy the longitudes here. (***BTW record these points in the text file as they may be needed later in calibration) 11) Give the zoom level to the same zoom level that you prefered in google maps. 12) Dont forget to choose a path to save your files and under options set the proxy connection settings in UMD if you are using so. 13) Click on start and bingo! there you have your image tiles and a file with an extension .umd will be saved in the same folder. 14) On the UMD, go to tools, click on MapViewer and choose the .umd file. you will now see your map in one piece....and you will smile! 15) Still go to tools and click on map combiner. A dialog will popup for you to choose the .umd file and to enter the IMAGE file name. u can use another extension for the image file like png, jpg etc...i usually use png. 16) Combine.....bingo! there u go! u have an IMAGE file for your map. *I SUGGEST THAT CREATE A .BMP FILE and A .PNG file* 17) Close UMD and open SmartCom OGF2 converter. 18) Choose your .png image and create an ogf2 file. 19) Connect your phone to your PC in Mass Memory mode and transfer the file to the smartComGPS\Maps folder. 20) Now disconnect your phone and load smartComGPS. it will load the map and propt you to add a calibration point. Go ahead and add one calibration point with dummy coordinates. You will notice that it will add another file with extension .map in the smartComGPS\Maps folder. 21) Connect yiur ohone and copy that file and paste it in your working folder on your PC. Delete that .map file from the phone too because you are going to edit it from your PC and put it back. 22) Now Open the OziExplorer, go to file-->Load and Calibrate Map Image. 23) Choose the .bmp image and bingo! it will load with your map in the same zoom level. 24) Now you are going to calibrate. Use the MapView window and take the small box locater to all the 4 cornners of the map. You will notice that the map in the back ground moves to that area too. 25)On the right side, select the Point1 tab. Now you are in calibration mode. Now move the red box in mapview in the left upper corner to calibrate point1. 26) out of mapview go to the the left upper corner of the background map and choose poit (0,0) and your 1st calibration point. You will notice that these X,Y cordinated will be reflected in the Point1 image cordinates. 27) now go back to the text file where you saved your coordibates and enter the top latitude and the left longitude in the corresponding places. 28) Repeat steps 25-27 for point2,point3,point4 and click on save. Thats it, you have calibrated your image and you are about to finish. 29) Go to save and a dilaog which prompts you to save a .map file will poop up. Do save the map file in your working folder. 30) Right click that .map file and edit the filename in the .map file to remove the pc's directory structure. Eg. Change C\OziExplorer\data\Kampala.bmp to Kampala.ogf2. 31) Save the .map file in the smartComGPS\Maps folder on your phone. 32) now open smartComGPS on your phone and bingo! there is your map with GPS capability and in the same zoom level. 33) In smartComGPS options, choose connect and simulate. By now you should be smiling. Whoa! Hope i was of help. i case you get a problem, please inform me Below is the link to the software. regards. http://rapidshare.com/files/230296037/Utilities_Used.rar.html Ok, the Rapidshare files i posted are gone, so you will have to download as described in the solution. If you need more help, go here: http://www.dotsis.com/mobile_phone/sitemap/t-160491.html Some months later, someone else gave almost the same kind of solution here. http://www.dotsis.com/mobile_phone/sitemap/t-180123.html Note: the solutions were mean't to help view maps on Symbian phones, but i think now they ca even do for Windows Phones, iphones and others so read, extract what you want and use it. Hope it helps. Sam Kea

Read the article

dasBlog

- by Daniel Moth

Some people like blogging on a site that is completely managed by someone else (e.g. http://wordpress.com/) and others, like me, prefer hosting their own blog at their own domain. In the latter case you need to decide what blog engine to install on your web space to power your blog. There are many free blog engines to choose from (e.g. the one from http://wordpress.org/). If, like me, you want to use a blog engine that is based on the .NET platform you have many choices including BlogEngine.NET, Subtext and the one I picked: dasBlog. In this post I'll describe the steps I took to get going with the open source dasBlog (home page, source page). A. Installing First I installed dasBlog on my local Windows 7 machine where I have IIS7 installed. To install dasBlog, I started by clicking the "Install" button on its web gallery page. After that I went through configuration, theming and adding content as described below. Once I was happy that everything was working correctly on the local machine, I set this up on a hosting service. I went for a Windows IIS7 shared hosting 3 month Economy plan from GoDaddy. The dasBlog site lists a bunch of other hosts. You can read the installation instructions for dasBlog, and with GoDaddy I just had to click one button since it is available as part of their quick-install apps. With GoDaddy I had a previewdns option that allowed me to play around and preview my site before going live. B. Configuring After it was installed (on local machine and/or hosting provider), I followed the obvious steps to create an admin user and logged in. This displays an admin navigation bar with the following options: 1. Navigator Links: I decided I was not going to use this feature. I manage links on the side of my blog manually elsewhere as part of the theme. So, I deleted every entry on this page and ignored it thereafter. 2. Blogroll: Ditto - same comment as for Navigator Links. 3. Content Filters: I did not delete (or add) these, but I did ensure both checkboxes are not checked. I.e. I am not using this feature now, but I may return to it in the future. 4. Activity: This is a read-only view of various statistics. So nothing to configure here, but useful to come back to for complementary statistics to whatever other statistical package you use (e.g. free stats as part of the hosting and I also use feedburner for syndication stats). 5. Cross-posting: I did not need that, so I turned it off via the Configuration Settings discussed next. 6. Configuration Settings: This is where the bulk of the configuration for the blog takes place and they are stored in a single XML file: Site.Config file. There are truly self-explanatory options to pick for Basic Settings, Services Settings and Services to Ping, Syndication Settings (this is where you link to your feedburner name if you have one) and Mail to Weblog Settings (I keep this turned off). There are also "Xml Storage System Settings" (I keep this turned off), "OpenId Settings" (I allow OpenID commenters), "Spammer Settings" (Enable captcha, never show email addresses) and "Comment settings" (Enable comments, don't allow on older posts, don't allow html). There are also Appearance Settings (I checked the "Use Post Title for Permalink", replaced spaces with hyphen and unchecked the "Use Unique Title"). Finally, there are also Notification Settings, but they are a bit of hit and miss in my case, in that I don’t always get the emails (still investigating this). C. Adding Content You can add content via the "Add Entry" link on the admin navigation bar or by configuring the "Mail to Weblog" settings and sending email or, do what I've started doing, use Live Writer (also the team has a blog). Another way to add content is programmatically if, for example, you are migrating content from another blog (and I'll cover that in separate post sharing the code). What you should know is that all blog content (posts and comments) live in XML files in a folder called "content" under your dasBlog installation. D. Theming There is a very good guide about themes for dasBlog, there is also a similar guide with screenshots (scroll down to "So how do I create a theme") and the dasBlog macro reference. When you install dasBlog, there are many themes available; each theme is in its own folder (representing the folder name) under the themes folder. You may have noticed that you can switch between these via the "Appearance Settings" described above (look for the combobox after the Default Theme label). I created my own theme by copy-pasting an existing theme folder, renaming it and then switching to it as the default. I then opened the folder in Visual Studio and hacked around the HTML in the 3 files (itemTemplate, homeTemplate and dayTemplate). These files have a blogtemplate file extension, which I temporarily renamed to HTML as I was editing them. There is no more advice I can offer here as this is a matter of taste and the aforementioned links is all I used. Personally, I had salvaged the CSS (and structure) from my previous blog and wanted to make this one match it as closely as possible - I think I have succeeded. E. If you run into any issue with dasBlog... ...use your favorite search engine to find answers. Many bloggers have been using this engine for a while and have documented issues and workarounds over time. One such example is ScottHa's dasBlog category; another example is therightstuff where I "borrowed" the idea/macro for the outlook-style on-page navigation. If you don't find what you want through searching, try posting a question to the forums. Comments about this post welcome at the original blog.

Search Results

Search found 45542 results on 1822 pages for 'enable add ons'.

Page 420/1822 | < Previous Page | 416 417 418 419 420 421 422 423 424 425 426 427 | Next Page >

- by David Alfonso

- by rasika vijay

- by aimlessWonderer

- by Stephen.Walther

- by Bil Simser

- by mbridge

- by DigitalGeekery

- by imekon

- by ZaijiaN

- by mohanbrij

- by shiju

- by nmarun

- by James Michael Hare

- by IDWMaster

- by dfree

- by Roosh Malai

- by shiju

- by DigitalGeekery

- by Stephen Walther

- by Mike L

- by Jason Fitzpatrick

- by user354089

- by samkea

- by Daniel Moth

< Previous Page | 416 417 418 419 420 421 422 423 424 425 426 427 | Next Page >