Search Results

Search found 11896 results on 476 pages for 'smart pro'.

Page 420/476 | < Previous Page | 416 417 418 419 420 421 422 423 424 425 426 427  | Next Page >

  • Odd IIS FTP Failure

    - by Monkey Boson
    We're running a script on our production box that zips up our database and FTPs it to a backup box every night. Our production box is running Redhat Enterprise 5. Our backup box is running Windows XP Pro / IIS 5.1. Both machines are on the same VLAN (not sure if this is imporatant). The backup file usually clocks in at around 3GB. Every now and again (~5% of the time), the backup script fails. The shell script on the "client side" - which looks at return codes - never identifies any problem since ftp always returns 0. On the "server side", IIS writes out a log that looks like this: #Software: Microsoft Internet Information Services 5.1 #Version: 1.0 #Date: 2009-08-08 07:04:25 #Fields: time c-ip cs-method cs-uri-stem sc-status sc-win32-status 07:04:25 192.168.111.235 [15]USER backup 331 0 07:04:25 192.168.111.235 [15]PASS - 230 0 07:05:54 192.168.111.235 [15]created backup_20090808.zip 426 10035 07:06:16 192.168.111.235 [15]QUIT - 426 0 Now, I know that 426 means "Connection closed, transfer aborted", which is sort-of a catch-all for "IIS was not happy". The real puzzler is the wincode: 10035 (WSAEWOULDBLOCK -- Resource temporarily unavailable). My understanding is that this code is normal when using non-blocking socket calls - which would almost certainly be used by any FTP Server implementation. My first guess that it might be a timeout issue doesn't make sense, since we're only talking about a few minutes here and the timeout was left at the default 900 s. Does anybody have any ideas about what is causing this problem, and how it may be fixed? Thanks!

    Read the article

  • Workstations cannot see new MS Server 2008 domain, but can access DHCP.

    - by Radix
    The XP Pro workstations do not see the new replacement domain upon boot; they only see their cached entry for the old (server 2003) domain controller. The old_server is not connected to the network. I have DHCP working with the same scope as the old_server. In my "before-asking" search for a solution I came across the following two articles, and I recall doing things as suggested by the articles. http://www.windowsreference.com/windows-server-2008/how-to-setup-dhcp-server-in-windows-server-2008-step-by-step-guide/ http://www.windowsreference.com/windows-server-2008/step-by-step-guide-for-windows-server-2008-domain-controller-and-dns-server-setup/ The only possible issue is: I was under the impression that the domain netbios needed to match the DC's netbios. The DC netbios is city01 while the domain's FQDN is city.domain.org (I think this is mistaken and should have been just domain.org) But, the second link led me to a post which I believe answers my question. I did as they instructed by opening Local Area Connection Properties, then selecting TCP/IPv4 and setting the sole preferred DNS server to the local hosts static IP (10.10.1.1). Search for "Your problems should clear up" for the post I'm referencing: http://forums.techarena.in/active-directory/1032797.htm Have I misunderstood their instructions? I am hoping to reach the point where I can define users and user groups. Also, does TechNet have a single theoretical overview document I could read. I really don't like treating comps as magic. I will be watching this closely and will quickly answer any questions. If I've left anything out it is because I did not know it was needed. PS: I am loath to ask obviously basic questions, but I am tired and wish to fix this before tomorrow. Also, this is my first server installation, thank you for your help.

    Read the article

  • Routing WIFI and LAN for specific traffic

    - by jakebird451
    I have two network devices aboard my macbook pro: WIFI (en1): Used for general traffic. Connects to an ip of 192.168.19.* via DHCP LAN (en0): Used for specific traffic. Connects to an ip of 192.168.2.10 as a static IP. Does not connect to a router, only a switch for direct routing connection. I have 4 IP addresses I need to access on the LAN: 192.168.2.1 192.168.2.21 192.168.2.20 192.168.2.30 The rest of the traffic needs to go to WIFI. I have tried setting up a routing table for the specific ip addresses, but I only managed to mess up my network. I do not venture out into the world of networking too often, but this was the latest command I have been trying: sudo route add -host 192.168.2.30 -interface en0 This command killed my ability to use ping. It told me that ping could not allocate memory (is that even possible)? It also killed my wifi access. Logging out and back in fixed the issue. I really do not mind to make this solution permanent, so I am fine with a temporary routing. EDIT: If I currently have been trying: sudo route flush sudo route add default 192.168.19.1 This gets everything to work for about a minute. But after such minute it "forgets" the routing to WiFi while retaining LAN's (en0) routing. If I unplug and replug my LAN (en0) cable, the process works for another minute.

    Read the article

  • Intel DriverInstall issue on HP ProLiant server DL580G5

    - by TomTom
    Given: A HP ProLiant server to be used for Hyper-V server (R 2) Problem: The server has a HP NC364T quad port card, which actually is an Intel 1000 Pro adapter. We are stuck getting this adapter properly working. We need to get it working with: 2 trunks of 2 ports each one of them fully vlan "aware" (without filtering anything - so that Hyper-V can do the VLAN filtering). So far we did: Install the server Install latest PSP. Problem here - tool does not work to set up teaming. We tried to install the latest ProWin pack from Intel - the drivers there are a LOT more current (26th of Marrch 2010, 9.13.41.0). The intalled driver (Microsoft) is ancient (march 2009, 9.13.4.10) A driver update fails both on command line (pnputil) as well as the PortLock device manager executable. No informatoin is provided. the ANS toolset can not create teams (fails with error - again, no reason provided), I know of no logs and the event log has no information either. Questions: What are the best drivers to use? How do we actually install them? How can we then set up teaming and how do we set up the VLAN behavior wanted?

    Read the article

  • Installing GitHub for Mac - "Github cannot be opened because of a probem"

    - by betitall
    I'm trying to get started using Git for Mac, but I receive an error when I try to run the program. I'm new to GitHub and relatively new to Mac. First, I installed Git using the downloadable .dmg file named "git-1.7.12.3-intel-universal-snow-leopard". I ran the .pkg file contained therein and the install seemed to work fine. I'm using a new macbook pro w/ retina. Then I downloaded the Github for Mac installer, "mac_GitHub for Mac 69.zip". When I double-click the file, it shows that there is a single file of type "Application". Double-clicking that application file produces the error: "GitHub cannot be opened because of a problem". Here are the partial details of that error: Application Specific Information: dyld: launch, loading dependent libraries Dyld Error Message: Library not loaded: @executable_path/../Frameworks/Rebel.framework/Rebel Referenced from: /Applications/GitHub.app/Contents/MacOS/GitHub Reason: no suitable image found. Did find: /Applications/GitHub.app/Contents/MacOS/../Frameworks/Rebel.framework/Rebel: file too short /Applications/GitHub.app/Contents/MacOS/../Frameworks/Rebel.framework/Rebel: file too short Any help would be much appreciated. Thanks.

    Read the article

  • can't access SATA card config screen on boot, nor access the disks

    - by Ronald
    We've just upgraded our file server using an ASUS P6T WS Pro board, running FreeBSD-RELEASE 8.2 and using zfs to manage 12 WD20EARS disks. Since our 3ware card has been giving us trouble we started using the six on-board SATA connectors and got a SuperMicro USAS2-L8i to provide eight more ports. Mechanically, the card is an awkward fit but electrically it all seems ok. Upon boot, the LSI controller shows up and states that pressing ctrl-c will bring up the LSI Config Utility. When doing that, the message changes to state that the utility will be started after initialization, however that never happens. There does seem to be an error message that's only displayed too briefly to read and seems to be about PCI and "not enough space". (That message is pushed off by a hardware summary and I've found no way to scroll back at this point.) The disks do not show up in any recognizable ways after booting, either. I found a hint in another discussion to check the address mapping on either the card or the motherboard BIOS, but have found no way to do that. So what I tried on a hunch is to disable everything that's on-board, including network adapters, Firewire controller and SATA. In fact, after doing that, I can successfully launch the LSI Config Utility. As far as I can tell, all looks well in there, and when booting in that configuration it also displays a list of the disks connected to it, which looks just fine as well. Only problem now is that I can't boot that way, because I need the on-board SATA controller and network adapters. As soon as I re-enable any of them I'm back to square one. That discussion I mentioned about mapping addresses said to try D000, then D7FF, then DFFF, in order. The LSI Config Utility shows the card address as D000 but offers no way of changing it. Any tips or insights would be appreciated.

    Read the article

  • SSH from mac to linux -> start gnome-session -> X11 keyboard mapping all messed up.

    - by Justin
    I have 2 computers: echo.local is running Ubuntu 9.04. justin.local is running Mac OS 10.6.1. X11 version on the mac is 2.3.4. I open X11 on the mac, and open a new xterm window (Applications Menu - Terminal), everything is fine. Keyboard works as expected. I do ssh -X echo.local from the mac (connecting to the linux box), and from the linux command prompt, start xterm - everything is fine. Keyboard works as expected. I do gnome-session from the linux command prompt (through SSH), gnome launches, but keyboard mapping is ALL types of screwed up. If I kill gnome-session and open an xterm via ssh, keyboard mapping is still screwed up. If I then kill the SSH session entirely, and do X11 - Applications Menu - Terminal, opening a brand new xterm window on the mac with no SSH session running at all ... keyboard mapping is still screwed up. Only after I quit X11 and relaunch, is the keyboard mapping back to normal. Keyboard layout under GNOME is Apple-MacBook/MacBook Pro.

    Read the article

  • Mac OS X 10.6.3: how does Apache config work?

    - by w-
    Just got a MacBook Pro 15" so I'm unfamiliar with how the filesystem is laid out. I noticed when in my filesystem that I've got a few paths specifying httpd.conf: /etc/apache2/httpd.conf /opt/local/apache2/conf/httpd.conf /private/etc/apache2/httpd.conf The config files are different in lots of ways (user, group, server_root, modules that are loaded, etc.) The apache2 folders themselves also greatly differ. It seems that the one getting used is either /etc/apache2/httpd.conf or /private/etc/apache2/httpd.conf I'm wondering if I might have messed up my system after installing some packages (php5, django, etc) via macports and maybe ended up with 2 apache2 instances. My questions are hence: which httpd.conf is the one being used ? what are the other files for? thanks --update-- To clarify, I didn't explicitly install apache2 via macports. I'm wondering if it was installed because it was a dependency. After more hunting around I'm learning I never should've installed php to begin with because Snow Leopard already includes php 5.3 from the get go. http://serverfault.com/questions/82410/apache-2-and-php-5-3-via-macports I'll need to open another question that asks about how the Mac filesystem works. Thanks all for replies.

    Read the article

  • Why do I get this message from chrome when navigating to https://www.amazon.com?

    - by Denis
    This is probably not the site you are looking for! You attempted to reach www.amazon.com, but instead you actually reached a server identifying itself as *.voxcdn.com. This may be caused by a misconfiguration on the server or by something more serious. An attacker on your network could be trying to get you to visit a fake (and potentially harmful) version of www.amazon.com. Intermittently, I get a blank page when going to http://www.amazon.com. So I stuck an 's' in the URL, making it https://www.amazon.com and got that message above (with the nice red screen) from Chrome indicating there might be some monkey business going on. After hammering on the URL a bunch of times and pulling it up in Chrome's developer tool to look at the network traffic on it, the url (without the s) started behaving. The url with the s just hangs, but the red screen no longer comes up. Some specs... I've got a macBook Pro, Snow Leopard, Time Warner cable. I've had enough strange stuff happening over the past couple months (google.com, youtube.com, amazon.com not coming up or loading strange error messages with random reference numbers) that I finally decided to switch to OpenDNS. Still having problems, though.

    Read the article

  • How do I deny access to everybody but me in Windows 7?

    - by GregH
    I am trying to set up a file server on my my Windows 7 Pro system at home. I set up one common "Share" folder that I have shared/published. Within the share folder I want to have individual folders for me and my wife...that is only I can read/write my folder and only my wife can read/write to her folder and neither of us can read the contents of the other person's folder. Then I want to have a "public" folder where we can both read/write to contents of the folder as well as any sub-folders created, but my "kids" account can only read from this folder and sub folders. It seems really confusing to set up something like this and it really shouldn't. I am really confused between the "allow", "deny", and dimmed check boxes in the security tab. It seems that if I "Deny" access to "Everyone" on my private folder, then I don't even have access to it. Windows security seems backwards from the rest of the world's security models. If I am in two groups and I deny access to one of the groups but allow access to the other group then Windows security denies me access as I am in one of the groups that has access disallowed. Very confusing.

    Read the article

  • Windows 7 Media Center PC not displaying MKV files properly

    - by David
    Does anyone know why Windows Media Center wouldn't correctly display a 16x9 video? I just upgraded my home-built HTPC from Vista Ultimate (hey, it was a giveaway) to Windows 7 Ultimate - clean install. After that, I installed the Divx7 beta (to get .MKV support) and AC3filter (so I could HEAR the MKV files). Previously, under Vista Ultimate (32 bit), I had Arcsoft's Total Theater Pro for playing Blu-Rays and MKV decoding under Media Center. Now when I play a 720p 16x9 MKV file, I get some 'letterboxing' - like it's halfway between 4x3 and 16x9 - with the aspect ration looking alightly squished as a result. Here's the wierd part. If I use the Media Center connection software in my XBox 360 - it plays perfectly, filling the 16x9 screen edge-to-edge, just like Vista's WMC software USED to. Of course, beats the network up because the XBox goes to the HTPC, the HTPC goes to my WHS machine to fetch the data, it comes back to the HTPC, gets transcoded and streamed back to the Xbox. I'm running the latest drivers for an NVidia card (as fetched by Windows 7). I have no idea WHY this is because if I play "ordinary" (i.s. SD) Divx files that are 16x9, they play just fine, scaled right up to my screen's edges. It puzzles me as to why the same machine that properly converts the bits for the Xbox can't display/scale them properly for the attached display. Mind you, Windows Media Player exhibits the same symptoms. Ideas?

    Read the article

  • Huh? JDK not found? (on Windows 7 64-bit)

    - by Android Eve
    I am setting up a development environment for the latest Android 2.3 on a fresh install of Windows 7 64-bit. I first installed the 64-bit JDK 6 (jdk-6u23-windows-x64.exe). Then, I installed 64-bit Eclipse Classic 3.6 (eclipse-SDK-3.6.1-win32-x86_64.zip). Then, I proceed to install the Android SDK Starter Package: installer_r08-windows.exe. But... upon start it says: "Java SE Development Kit (JDK) not found." Why? I just installed it. Is this a mismatch between 32-bit and 64-bit? How do I solve this? Update (1): I tried setting the %JAVA_HOME% environment variable, as well as setting the Installed JREs in Eclipse, as suggested below. None of these solved the problem. It appears that I am not the only experiencing the problem, as this thread suggests: http://stackoverflow.com/questions/1919340/android-sdk-setup-under-windows-7-pro-64-bit I wonder whether there is a 64-bit version of the Android SDK. Update (2): I used the zip version instead (android-sdk_r08-windows.zip), ran android.bat, updated all SDK packages, and installed the ADT plugin (8.0.1), not before having to check: 'Contact all update sites during install to find required software'. We'll see how this goes... Update (3): It worked! (going to accept @bubu's answer shortly) -- but why doesn't the emulator include the HelloAndroid app when I run it (Ctrl+F11) from Eclipse?

    Read the article

  • Second ip address on same interface CentOS 6.3

    - by user16081
    I tried to add a second LAN addresses in CentOS 6.3 on a brand new install and it's not working. I installed a new copy of CentOS 5.7 and tried the same and it worked right away. Now I'm just trying to setup the alias on the same subnet and it's not working. what am i doing wrong, is this not possible on CentOS 6.3? second ip address on the same interface but on a different subnet CentOS 5.7 it works: DEVICE=eth0 BOOTPROTO=static BROADCAST=192.168.0.255 HWADDR=00:0C:29:01:6F:89 IPADDR=192.168.0.167 NETMASK=255.255.255.0 NETWORK=192.168.0.0 ONBOOT=yes DEVICE=eth0:0 BOOTPROTO=static BROADCAST=192.168.0.255 HWADDR=00:0C:29:01:6F:89 IPADDR=192.168.0.166 NETMASK=255.255.255.0 NETWORK=192.168.0.0 ONBOOT=yes On CentOS 6.3: does not work DEVICE=eth0 BOOTPROTO=static BROADCAST=192.168.0.255 HWADDR=00:0C:29:1E:DE:86 IPADDR=192.168.0.242 NETMASK=255.255.255.0 NETWORK=192.168.0.0 GATEWAY=192.168.0.1 ONBOOT=yes DNS1=205.134.232.138 DNS2=4.4.4.4 DEVICE=eth0:0 BOOTPROTO=static BROADCAST=192.168.0.255 HWADDR=00:0C:29:1E:DE:86 IPADDR=192.168.0.240 NETMASK=255.255.255.0 NETWORK=192.168.0.0 ONBOOT=yes # /etc/init.d/network restart Shutting down interface eth0: Device state: 3 (disconnected) [ OK ] Shutting down loopback interface: [ OK ] Bringing up loopback interface: [ OK Bringing up interface eth0: Active connection state: activated Active connection path: /org/freedesktop/NetworkManager/ActiveConnection/3 [ OK ] # ping 192.168.0.240 PING 192.168.0.240 (192.168.0.240) 56(84) bytes of data. From 192.168.0.242 icmp_seq=2 Destination Host Unreachable Appreciate any advice, thanks Update: Perhaps this is relevant? On CentOS 5.7: # dmesg |grep eth eth0: registered as PCnet/PCI II 79C970A eth0: link up eth0: link up On 6.3: # dmesg | grep eth e1000 0000:02:00.0: eth0: (PCI:66MHz:32-bit) 00:0c:29:1e:de:86 e1000 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None 8021q: adding VLAN 0 to HW filter on device eth0 eth0: no IPv6 routers present

    Read the article

  • Strange corruption saving from Textpad 5 within Windows 7-64 VirtualBox VM to shared folder with Mac host

    - by joelarson
    I have a fairly new Window-7 64bit install running in Virtual Box on a MacBook Pro. I'm using TextPad 5 within that environment to edit source files that live on a shared folder that is on the Mac Host. When I save some of these source files, the saved file ends up with some amount of the end of the file repeated one or more times. For example, a file that has this at the end: ... return ttp; }; would, once saved, open up with: ... return ttp; }; }; It is definitely a problem with how the file gets written as opposed to how it's read, because I can see this now matter what app I use to open the file with (NotePad & Word in Windows 7, TextWrangler back in the Mac). I've tried saving as ANSI and UTF-8, and with or without the 'Write Unicode and UTF-8 BOM' checked in TextPad preferences. It doesn't happen with all files though I can't see any pattern about which files do or don't have the problem. It doesn't happen with files written to the Windows 7 c:\ drive. And so far it doesn't happen from other applications saving files, only TextPad. Any ideas? My versions: Textpad 5.4.2 Windows 7 Professional 64-bit, fully up to date VirtualBox 4.0.8 r71778 OSX 10.6.7

    Read the article

  • Error 53 - The network path was not found.

    - by Jack
    I have a machine in my Active Directory Domain that I can no longer "net view" from other machines in the domain. This is a Windows XP Pro machine. It is hosting a VMWare virtual of my Domain Controller. If I attempt to net view [machine name] I get system error 53, The network path was not found. This is not a DNS issue, the same thing happens with the machine's IP. I don't think it's a firewall issue, I turned the firewall off on this machine. As I mentioned, it has worked in the past, and then stopped for no reason that I can see. I (intentionally) didn't change the software. I CAN get to the VMs hosted on this machine, can connect to their shares, net view them, etc. All other machines can see each other. In fact, the problem machine can see other machines and access their shares just fine. I tried removing the machine from the domain and re-adding it. I tried deleting the shares and recreating them. Not sure how to troubleshoot this any further. Any ideas?

    Read the article

  • New monitor connected to HDMI adaptor doesn't show output after booting

    - by Paul
    Hello out there in the multiple monitors’ world. I am a very old newbie in your world and need help. I just purchased a new Asus VH236H monitor and hooked it up the HDMI port of an ATI Radeon HD4300 / 4500 Series display adaptor. I left the old Princeton LCD19 (TMDS) hooked up to the DVI port of the same display adaptor. Both monitors displayed the boot sequence, after I fired good old Sarastro2 (Asus P5Q Pro Turbo – Dual Core E5300 – 2.60 GHz) up. The Asus lacked one half of a second behind the Princeton until the Windows 7 Ultimate SP 1 boot up was complete. Then the Asus displayed “HDMI NO SIGNAL” and went into hibernation. The Princeton stayed lit up as before. Both monitors are displayed on the “Screen Resolution Setup Display” and I plaid around with them for a while. The only thing I accomplished was to shove the desktop icons from the Princeton to the still hibernating Asus. The “Multiple displays:” is set to “Extend these displays”, the Orientation is “Landscape” and the Resolutions are set on both to the “recommended” one. Both monitors show that they work properly in the advanced Properties display. What am I doing wrong, what am I missing? Never mind the opinions about the different resolutions of the two monitors. I always can unhook the Princeton and give it to a Goodwill Store if I do not like the setup. I just would like to make it work. Any constructive help is very much appreciated, Thank you.

    Read the article

  • Should I enabled 802.3x hardware flow control?

    - by Stu Thompson
    What is the conventional wisdom regarding 802.3x flow control? I'm setting up a network at a new colo and am wondering if I should be enabling it or not. My oh-cool-a-bright-and-shiny-new-toy self wants to enable it, but this seems like one of those decisions that could blow up in my face later on. My network: An HP ProCurve 2510G-24 switch A pair of Debian 5 HP DL380 G5's with built-in NC373i 2-port NIC LACP'd as one link. 9000 jumbo frames enabled. (Application) A pair of hand-built Ubuntu server with 4-port Intel Pro/1000 LACP'd as one link. 9000 jumbo frames enabled. (NAS) A few other servers with with single 1Gbps ports, but one with 100Mbps. Most of this kit is 802.3x. I've been enabling it as I go along, and am about to test the network. But as my 'go live' day nears, I am worried about the 802.3x decision as I've never explicitly used it before. Also, I've read some 10-year old articles out there on the Intertubes that warn against using flow control. Should I be enabling 802.3x hardware flow control?

    Read the article

  • VPN on OSX disconnects after precisely 2 minutes and 30 seconds on specific network

    - by Tyilo
    When connecting to my own VPN server on a specific network, called public-network, my Mac disconnects the VPN connection after 2 minutes and 30 seconds. I have performed several tests and this is the result: It works fine until the 2:30 mark It doesn't matter which Mac I use, it still disconnects It doesn't matter which client I use, all of the following does the same: OSX system client, HMA! Pro VPN and Shimo It doesn't matter which protocol I use, at least all of these protocols does the same: PPTP, OpenVPN and L2TP over IPSec The same thing happens using my own VPN server and HMA!'s VPN server. All other clients (Windows/iPhone) can use any of these VPN servers and protocols without problem on public-network On OSX, all the protocols, clients and servers works fine on any other network So it seems that it is the combination of OSX, VPN & public-network that causes this. This is the syslog from my VPN server, when the disconnection happens: Feb 2 12:04:32 raspberrypi pptpd[31400]: CTRL: EOF or bad error reading ctrl packet length. Feb 2 12:04:32 raspberrypi pptpd[31400]: CTRL: couldn't read packet header (exit) Feb 2 12:04:32 raspberrypi pptpd[31400]: CTRL: CTRL read failed Feb 2 12:04:32 raspberrypi pptpd[31400]: CTRL: Reaping child PPP[31401] Feb 2 12:04:32 raspberrypi pppd[31401]: Hangup (SIGHUP) Feb 2 12:04:32 raspberrypi pppd[31401]: Modem hangup Feb 2 12:04:32 raspberrypi pppd[31401]: Connect time 2.5 minutes. Feb 2 12:04:32 raspberrypi pppd[31401]: Sent 3963649 bytes, received 362775 bytes. Feb 2 12:04:32 raspberrypi pppd[31401]: MPPE disabled Feb 2 12:04:32 raspberrypi pppd[31401]: Connection terminated. Feb 2 12:04:32 raspberrypi pppd[31401]: Exit. Feb 2 12:04:32 raspberrypi pptpd[31400]: CTRL: Client <ip-adress> control connection finished

    Read the article

  • Can't log in after restoring from Time Machine

    - by Jay Conrod
    My friend uses a Macbook Pro with Snow Leopard 10.6.2. She uses both FileVault and Time Machine to preserve her data. Recently, she suffered a hard disk failure. After restoring from Time Machine using the Snow Leopard install disk, she gets the following error when logging in: You are unable to log in to the FileVault user account at this time. Logging into the account failed because an error occurred. When examining the file system through Terminal, I noticed her home directory is not present: there is no /Users/username directory, or the FileVault .sparsebundle file that's supposed to be there. When using Time Machine.app on /Users, it appears as if her home directory as never there. Additionally, I did a search on the backup disk with the following command: sudo find /Volumes/backup -name '*.sparsebundle' No results. She told me that after working with some large data files, Time Machine would come on, and it would sound like it was transferring a lot of data to the hard disk. Time Machine must have been doing something, right? How can we recover her files? Are they still there?

    Read the article

  • Cannot Install Bootcamp on Mac Fusion Drive

    - by user3377019
    I have two drive installed in my mid-2013 Macbook pro. It is running osx maverick. I set the two drives (an ssd and a regular HD) up using the fusion drive (following the diy fusion drive guides out there). I went ahead and created a 40gb partition to host my windows install. I removed the SSD, installed windows, then reinstalled the SSD. As soon as the ssd was placed back in the bootcamp partition stopped booting. I get a blinking cursor on a black screen. I checked out the partition info in disk utility and it appears that the windows partition is not marked bootable. Below is some info I managed to gather. I am wondering if there is a way to fix the partition table so my bootcamp will boot. /dev/disk0 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *120.0 GB disk0 1: EFI EFI 209.7 MB disk0s1 2: Apple_CoreStorage 119.7 GB disk0s2 3: Apple_Boot Boot OS X 134.2 MB disk0s3 /dev/disk1 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *500.1 GB disk1 1: EFI EFI 209.7 MB disk1s1 2: Microsoft Basic Data BOOTCAMP 40.0 GB disk1s2 3: Apple_CoreStorage 459.2 GB disk1s3 4: Apple_Boot Boot OS X 650.0 MB disk1s4 /dev/disk2 #: TYPE NAME SIZE IDENTIFIER 0: Apple_HFS Macintosh HD *573.4 GB disk2 Name : BOOTCAMP Type : Partition Disk Identifier : disk1s2 Mount Point : /Volumes/BOOTCAMP File System : Windows NT File System (NTFS) Connection Bus : SATA Device Tree : IODeviceTree:/PCI0@0/SATA@1F,2/PRT1@1/PMP@0 Writable : No Universal Unique Identifier : 584BAED6-4C46-4F18-93B3-957F6E27003C Capacity : 40 GB (39,998,980,096 Bytes) Free Space : 16.34 GB (16,339,972,096 Bytes) Used : 23.66 GB (23,659,003,904 Bytes) Number of Files : 86,424 Number of Folders : 0 Owners Enabled : No Can Turn Owners Off : No Can Be Formatted : No Bootable : No Supports Journaling : No Journaled : No Disk Number : 1 Partition Number : 2

    Read the article

  • Task Manager Does Not Start Every Time

    - by diek
    I have had a problem that started some time ago, 6 months maybe. I should have noted the first instance but I didn't. I am using Windows 7 Pro, 32bit. Under normal circumstances I can open up the the Task Manager, via the task bar or cntrl alt del. When I get a program stuck, causing a freeze or non-responsive system I try to open the task manager. It will not work. I have had plenty of similar problems in the past and I had no trouble getting it open. I have searched the internet but the only results I can find are when the task manager will not start under any situation. I am running ESET NOD32 as the anti-virus. The latest example happened when I opened a new tab in Google and tried to copy an image. Google accounts for at least 50% of the examples. Ran System File Checker tool, sfc /scannow as recommended on another post. No errors returned. Any guidance would be appreciated.

    Read the article

  • Mod_rewrite (CakePHP routing functionality) forbidden after Snow Leopard upgrade

    - by Ryan Ballantyne
    Hello ServerFault, I am using the standard Apple-provided installations of PHP 5.3 and Apache 2 to do web development on a Mac Pro that I just upgraded to Mac OS X 10.6 (Snow Leopard). The upgrade went well enough, if I ignore the fact that it destroyed my ability to get work done. ;) After the update, the CakePHP application I was developing started giving me 403 Forbidden errors when accessed. Based on the errors in the log file, I've determined that Apache is choking on the mod_rewrite rules in Cake's .htaccess file. Here's the file, in its entirety: <IfModule mod_rewrite.c> RewriteEngine on RewriteRule ^$ app/webroot/ [L] RewriteRule (.*) app/webroot/$1 [L] </IfModule> It's not that the rules themselves are wrong, but that Apache is forbidding the use of mod_rewrite altogether. All other pages on the machine work fine, and the 403 errors go away if I comment out the .htaccess file (but nothing works, of course). In my httpd.conf file, I've tried changing this: <Directory /> Options FollowSymLinks AllowOverride None Order deny,allow Deny from all </Directory> To this: <Directory /> Options FollowSymLinks AllowOverride All Order deny,allow Allow from all </Directory> ...which has no effect. I don't know much about Apache configuration files, and I'm quite stuck on this. In fact, I know little enough that I'm not sure which information about my setup is needed to enable people to provide useful answers. I'm just using the vanilla OS X setup, nothing fancy. Googling has yielded no fruits for me this time, so I'm turning to you. Any ideas?

    Read the article

  • Windows 7 Multi-NIC woes

    - by Eric
    I have Comcast business Internet here. It gives me 5 static IPs. Most of the machines in my house connect to a router like every other household. It has a 192.168.117.x subnet, DHCP Server, etc. and all is well. However, I have a second machine on MY desk that has a life Internet IP. Up until yesterday, this machine was running XP Pro. The primary NIC was manually set to 192.168.117.241 with no gateway, and the secondary NIC was manually set to 173.x.x.171 with a gateway of 173.x.x.174. This worked just fine for years. Yesterday I replaced that XP machine with a brand new Windows 7 x64 box. Again, I configured it the same way. The onboard NIC was given a static 192.168.117.x address with no gateway, and the secondary NIC was given a live Internet IP address with the proper router, etc. 2 Problems. First is that the internal network (192.168.117.x) is listed as a public network because there's no gateway, so that means no homegroup, no file sharing, none of that. And I can't change it from what I'm reading... The second is that the machine reports the "router" ip address as it's address, and not the address that it's supposed to. I'm ready to tear my hair out over this. Any ideas?

    Read the article

  • Audio card with built-in ground isolator?

    - by Dave Jarvis
    What audio cards would you recommend that eliminate hum, and hard-drive & mouse movement signal interference? Hardware components: Motherboard. Asus P5Q SE Audio. Realtek ALC 1200, 8-Channel High-Definition Audio CODEC (on board) Harddrive. WD Caviar 320 GB Mouse. Logitech Marbleman USB Mixer. Mackie d.4 Pro Amplifier. Sonance Sonamp 260 All components are plugged into the same Monster Power HDP 910 powerbar (does not help eliminate noise). I have no other components plugged in. The computer uses a Monster iCable 1000 to go from mini (on board audio) to RCA (mixer). I have moved the cable as far from other cables as possible. A ground loop isolator between the mixer and on board audio eliminates all noise. I would rather not use a ground loop isolator; an internal audio card that is Linux-compatible (Kubuntu) would be ideal. Suggestions?

    Read the article

  • Is it possible to re-cab an Administrative Install Point?

    - by Nathaniel Bannister
    We have Acrobat 8 Pro at work, and our media was painfully out of date. Rather than install all of the machines at 8.0.0 and then do the 6 or 7 consecutive reboots adobe expects you to be ok with I decided I'd integrate the .msp files into the installer. After reading up on it, I figured out the exact patch order that adobe required, extracted my cd to an Administrative install point, and ran the patches against it: msiexec /a AcroPro.msi /p AcrobatUpd810_efgj_incr.msp TARGETDIR="C:\Acrobat8" /log "output.log" msiexec /a AcroPro.msi /p AcrobatUpd811_all_incr.msp TARGETDIR="C:\Acrobat8" /log "output.log" msiexec /a AcroPro.msi /p AcrobatUpd812_all_incr.msp TARGETDIR="C:\Acrobat8" /log "output.log" msiexec /a AcroPro.msi /p AcrobatUpd813_all_incr.msp TARGETDIR="C:\Acrobat8" /log "output.log" msiexec /a AcroPro.msi /p AcrobatUpd816_all_incr.msp TARGETDIR="C:\Acrobat8" /log "output.log" msiexec /a AcroPro.msi /p AcrobatUpd817_all_incr.msp TARGETDIR="C:\Acrobat8" /log "output.log" msiexec /a AcroPro.msi /p AcrobatUpd820_all_incr.msp TARGETDIR="C:\Acrobat8" /log "output.log" msiexec /a AcroPro.msi /p AcrobatUpd822_all_incr.msp TARGETDIR="C:\Acrobat8" /log "output.log" msiexec /a AcroPro.msi /p AcrobatUpd823_all_incr.msp TARGETDIR="C:\Acrobat8" /log "output.log" msiexec /a AcroPro.msi /p AcrobatUpd825_all_incr.msp TARGETDIR="C:\Acrobat8" /log "output.log" msiexec /a AcroPro.msi /p AcrobatUpd826_all_incr.msp TARGETDIR="C:\Acrobat8" /log "output.log" Now I have a AIP that is fully patched to 8.2.6 (Tested working prior to attempting to CAB it), but is absolutely huge (1.2gb) what I would like to do is take the folders within the AIP and put them back into a cab file for the sake of convenience in transferring the files around. I tried the command: cscript "C:\Program Files\Microsoft SDKs\Windows\v7.0\Samples\sysmgmt\msi\scripts\WiMakCab.vbs" AcroPro.msi Data1 /L /C /S Per the guide I was using, while this did produce the cab file I Wanted, however the resulting MSI fails to install with an error 2602: It's been a while since I've done something like this, and it's probably a glaring oversight on my part, but any insight would be much appreciated.

    Read the article

< Previous Page | 416 417 418 419 420 421 422 423 424 425 426 427  | Next Page >