Search Results

Search found 23427 results on 938 pages for 'christopher done'.

Page 422/938 | < Previous Page | 418 419 420 421 422 423 424 425 426 427 428 429  | Next Page >

• Why does plymouth start so late?

  - by Marky

  It appears that starting with 11.04 Plymouth starts so late in the boot process. Sometimes I only have a split second to see it before it transitions to the login screen. This is the same for 11.10. Compared to 10.04 and 10.10, Plymouth starts only a couple seconds or so after Grub and is very visible within the entire boot process. Is there something that can be done to have Plymouth run earlier? I have experienced this on 3 different machines and on 2 of these machines, I've been running Ubuntu since 10.04. So it's not just my notebook's hardware that is causing this. *One a side note, the boot process is one of the ugliest parts of modern Linux. Ubuntu is not excluded. After almost a decade, (I forget but was bootsplash the first?) this still has only been partly solved. For a couple of seconds ugly text is still seen when shutting down. On several ocassions, the same ugly text is seen when logging out of a session. It's never as smooth as you want it to be. Splash themes are great, don't get me wrong. It's just the transitions that are way off and you get glimpses of what's underneath. I'm used to this but for those new to Ubuntu and coming from Windows. It is a turn off.* pardon the rant. :)

  Read the article

• Dealing with Fine-Grained Cache Entries in Coherence

  - by jpurdy

  On occasion we have seen significant memory overhead when using very small cache entries. Consider the case where there is a small key (say a synthetic key stored in a long) and a small value (perhaps a number or short string). With most backing maps, each cache entry will require an instance of Map.Entry, and in the case of a LocalCache backing map (used for expiry and eviction), there is additional metadata stored (such as last access time). Given the size of this data (usually a few dozen bytes) and the granularity of Java memory allocation (often a minimum of 32 bytes per object, depending on the specific JVM implementation), it is easily possible to end up with the case where the cache entry appears to be a couple dozen bytes but ends up occupying several hundred bytes of actual heap, resulting in anywhere from a 5x to 10x increase in stated memory requirements. In most cases, this increase applies to only a few small NamedCaches, and is inconsequential -- but in some cases it might apply to one or more very large NamedCaches, in which case it may dominate memory sizing calculations. Ultimately, the requirement is to avoid the per-entry overhead, which can be done either at the application level by grouping multiple logical entries into single cache entries, or at the backing map level, again by combining multiple entries into a smaller number of larger heap objects. At the application level, it may be possible to combine objects based on parent-child or sibling relationships (basically the same requirements that would apply to using partition affinity). If there is no natural relationship, it may still be possible to combine objects, effectively using a Coherence NamedCache as a "map of maps". This forces the application to first find a collection of objects (by performing a partial hash) and then to look within that collection for the desired object. This is most naturally implemented as a collection of entry processors to avoid pulling unnecessary data back to the client (and also to encapsulate that logic within a service layer). At the backing map level, the NIO storage option keeps keys on heap, and so has limited benefit for this situation. The Elastic Data features of Coherence naturally combine entries into larger heap objects, with the caveat that only data -- and not indexes -- can be stored in Elastic Data.

  Read the article

• Connecting to Windows 7 from fedora is slow

  - by user44212

  I use rdesktop command to connect to windows 7 machine remotely but I get a very slow reponse when I try and connent to it. The command that I used to connect to it is rdesktop -4 -C -x -b : -g 100% 192.168.1.100. I have tried using the rdesktop command to connect to the console port as well but the result is the same. I have even tried using the Terminal server client application the result is the same. I am trying to connect from fedora 14 machine to windows 7 professional is there any tweaking that needs to be done to overcome this issue either on fedora or Windows 7.

  Read the article

• Static Content Caching in Sticky Session ?

  - by Ravi

  can we do Static Content caching in Sticky Session Servers. We use SqlStateServer to store the Session of the user. right now we are doing performance tuning in our application, so we decided to cache the static Content(images, css, js) for the applicaiton. so that it loads faster. Is it Good to cache the static content in Sticky Session ? If it's good, then can any one give me some links where i can read about it. right now i done following settings in my web config file <staticContent> <clientCache cacheControlCustom="public" cacheControlMode="UseMaxAge" cacheControlMaxAge="500.00:00:00" /> </staticContent> can this is the good code ? will it not affect our sticky session environment ? my goal is to cache the static images, css, Js for the application

  Read the article

• Is it possible to use a static IP assigned by my ISP for an offsite web server on a VPS (different ISP)?

  - by NightOwl888

  I have a web server on a Virtual Private Server with a hosting provider. Unfortunately, they are really stingy with IP addresses and I need to run several SSL certificates on my server, so I will need a few more than I have. I have a block of 5 static IP addresses on a business package through a different ISP and I am only using 1 of them for connectivity in the office. What I am wondering is if it is possible to use the 4 unused static IP addresses from this ISP on my VPS, which is hosted by another ISP? The VPS (web server) is running Windows Server 2008 R2 Web Edition. If this can be done, please let me know how to configure it.

  Read the article

• sharing life experience

  - by gcc

  I am a student of computer engineering. I have never done any programming before, and as you can understand, I don't know how to study it or how to make my own programs. My English is weak [edited for clarity - ed], and so if you don't like the choices I list, please feel free to provide others. How should I study? How should I learn programming languages? Study completely from a book. Don't study from a book, just try writing code. A mix of the two; study from a book, then try writing code. Study half the book, then write the code by hand on paper. Listed to the teacher, then try to solve general problems (those not from any specific chapter). I have send that question to stackoverflow before when I am at first year. Now, I want to construct webpage to guide fresh students by giving advise of yours and mines.Maybe, you wonder Why I want to construct webpage , I just want help the other student. I am giving a link to that question < http://stackoverflow.com/questions/3389465/how-should-i-study-programming-languagess If you have other advice, feel free. EDIT: This web cite, I think , is constructed to share member's life experience and also I know these experiences is valuable . So I have no right to want your opinion, But I want your opinion / experience even if you think it is not so helpful to other

  Read the article

• vps running out of memory, 200MB free

  - by demon

  At the beginning of this year I took a VPS for my website because I was running against the resource limits from a shared hosting. Here are the things I know: 2GB memory, with 1GB swap Debian X64 server ED installed Software running on the webserver: mysql apache postfix pop3 imap amavisd clamd cron fail2ban munin-node pure-ftpd spamd nginx Now for the setup: Nginx listens on port 80 and handles the static files, the php side is done by apache2 running mod_php in combi with apc(no var caching!). Iam using a pretty 'busy' drupal and phpbb stack on the server, for drupal iam using boost and authcache to handle of the server load with a pressflow stack. phpbb is just phpbb3 with some mods installed, but has at max 30 users online at a time.. The problem is that its staring to use the swap after a few days after a reboot and thus the site becomes slower. I'v added pictures of monit and munin, so maybe somebody can help me out... Monit: Munin:

  Read the article

• Explaining Asteroids Movement code

  - by Moaz ELdeen

  I'm writing an Asteroids Atari clone, and I want to figure out how the AI for the asteroids is done. I have came across that piece of code, but I can't get what it does 100% if ((float)rand()/(float)RAND_MAX < 0.5) { m_Pos.x = -app::getWindowWidth() / 2; if ((float)rand()/(float)RAND_MAX < 0.5) m_Pos.x = app::getWindowWidth() / 2; m_Pos.y = (int) ((float)rand()/(float)RAND_MAX * app::getWindowWidth()); } else { m_Pos.x = (int) ((float)rand()/(float)RAND_MAX * app::getWindowWidth()); m_Pos.y = -app::getWindowHeight() / 2; if (rand() < 0.5) m_Pos.y = app::getWindowHeight() / 2; } m_Vel.x = (float)rand()/(float)RAND_MAX * 2; if ((float)rand()/(float)RAND_MAX < 0.5) { m_Vel.x = -m_Vel.x; } m_Vel.y =(float)rand()/(float)RAND_MAX * 2; if ((float)rand()/(float)RAND_MAX < 0.5) m_Vel.y = -m_Vel.y;

  Read the article

• Does a successful exit of rsync -acvvv s d guarantee identical directory trees?

  - by user259774

  I have two volumes, one xfs, and another ntfs - ntfs was empty, and xfs had 10 subitems. I needed to sync them. I initially copied a few of the subitems by dragging them over in a gui fm. Several of the direct descendants which i had dragged finished, apparently. One I stopped before it was done, and the rest I cancelled while it still appeared to be gathering information about the files. Then I ran rsync -acvvv xmp/ nmp/, where xmp and nmp are the volumes' respective mountpoints, which exited with a 0 status. find xmp -printf x | wc -c and find nmp -printf x | wc -c both return 372926. My question is: Am I guaranteed that the two drives' contents are identical?

  Read the article

• What are some IT jobs where you don't sit at a desk for 8-10hrs a day?

  - by zippy

  Like a lot of people in IT I sit at a desk for 8-10hrs/day working on stuff that needs to get done "now". That usually means eating unhealthy lunches at my desk, and sometimes dinner too. This does terrible things to your health. I have been trying to work some exercise into the workday but I was thinking it would be great if I worked somewhere where I was exercising all the time (walking around, lifting servers, etc.). Does anyone have a job in IT (or know someone) where you are actually moving around (not sitting) doing something for most of the day?

  Read the article

• Building a List of All SharePoint Timer Jobs Programmatically in C#

  - by Damon Armstrong

  One of the most frustrating things about SharePoint is that the difficulty in figuring something out is inversely proportional to the simplicity of what you are trying to accomplish.  Case in point, yesterday I wanted to get a list of all the timer jobs in SharePoint.  Having never done this nor having any idea of exactly how to do this right off the top of my head, I inquired to Google.  I like to think my Google-fu is fair to good, so I normally find exactly what I’m looking for in the first hit.  But on the topic of listing all SharePoint timer jobs all it came up with a PowerShell script command (Get-SPTimerJob) and nothing more. Refined search after refined search continued to turn up nothing. So apparently I am the only person on the planet who needs to get a list of the timer jobs in C#.  In case you are the second person on the planet who needs to do this, the code to do so follows: SPSecurity.RunWithElevatedPrivileges(() => {    var timerJobs = new List();    foreach (var job in SPAdministrationWebApplication.Local.JobDefinitions)    {       timerJobs.Add(job);    }    foreach (SPService curService in SPFarm.Local.Services)    {       foreach (var job in curService.JobDefinitions)       {          timerJobs.Add(job);       }     } }); For reference, you have the two for loops because the Central Admin web application doesn’t end up being in the SPFarm.Local.Services group, so you have to get it manually from the SPAdministrationWebApplication.Local reference.

  Read the article

• Joining a network with a Virtual Windows Server 2008 R2

  - by Triztian

  Hi all, here's my case, I have set up a share in a virtual windows server 2008 R2, the server is hosted by GoDaddy my question is, how do I access the server's public folders, I need to open a file locally (on the client) and to do that I need the server to show up in my Network locations, I have the right credentials and have created a special group that has access to the particular folder that I'm sharing the problem is I don't know how to add the server to my network locations. I have tried VPN Connection but it is my understanding that it cannot be done since it is virtual share server. Any help is trully appreciated.

  Read the article

• Enterprise Portal Issue with the Ax Demo VPCs

  - by ssmantha

  Microsoft’s Ax Demo VPC is basically configured for a static IP address 192.168.0.1, this is due to the fact that the VPC has Domain Controlller configured in it which requires a static IP. When we put this VPC on a network with a different subnet and change the IP you can observer that the site http://sharepoint and http://sharepoint/EP cease to function and show “Page Not Found” errors in the browser. This is mainly due to the DNS configuration which is not updated. Below is the screen shot of the changes that needs to be done to make the site functioning properly. Change the following entries in the Forward Lookup Zones of DNS management: These websites default, SharePoint and projectserver are all mapped to a single port in the IIS i.e. port number 80. These websites are recognised with host headers. These host headers are configured in DNS with incorrect IP address entries in DNS when you change the IP address of the VPC. Just change these values to point to the Local Loop Adapter (127.0.0.1) and change the DNS to point to this address in the TCP/IP properties as shown below: This will resolve the issue with the website rendering. Initially you may get time out errors while browsing these website. be patient and try again this would work.

  Read the article

• Multiple SSL on same IP [closed]

  - by kadourah

  Possible Duplicate: Multiple SSL domains on the same IP address and same port? I have the following situation: first domain: test.domain.com IP: 1.2.3.4 Port: 443 SSL: Purchased from godaddy and specific to that domain Works fine no issues. I would like to add another site: test2.domain.com IP: the same Port: can be different SSL: different since I can't use the SSL above because it's specific to the site above. Now, when I add the HTTPS binding to the second site with IP:Port combination it appears to always load the first SSL ignoring the second certificate. How can I add second SSL binding to the same IP using a "different" certificate? Can this be done?

  Read the article

• Automating the Backup of a SQL Server 2008 Express Database

  - by JaydPage

  Steps Involved: 1) Create a Database Backup Script. 2) Create a Scheduled Task To Run the Backup Script. 1 Create a Database Backup Script. a) Download and install SQL Server Management Studio. This is a free tool available on the Microsoft website. b) Once Management Studio is installed launch it and connect to the SQL server instance that contains the database that you want to back up. c) Right click on the database and then in the menu choose Tasks -> Back up... d) This will open up a window where you can choose your backup options, once you are happy with the options click on the "Script" button near the top and select the "Script Action to File" option. e) Save the File. 2 Create a Schedule Task to Run the Backup Script a) Open up Windows Task Scheduler. b) Create a new Task using the wizard, when asked to select a program browse to C:\Program Files\Microsoft SQL Server\100\Tools\binn\SQLCMD.exe c) There are 2 arguments that need to be set: -S \SERVER_INSTANCE_NAME  -i "PATH_OF_SQLBACKUP_SCRIPT" where SERVER_INSTANCE_NAME  is the name of the instance of SQL server that contains your database e.g. (local) and PATH_OF_SQLBACKUP_SCRIPT is the path of your backup script e.g. "C:\Program Files\Microsoft SQL Server\DatastoreBackup.sql" d) Adjust the task to run at the desired times and you are done.

  Read the article

• configuring linux server to send traffic to local machines using local IP address

  - by gkdsp

  Two linux servers, server1 and server2, are on the same local network (they also have access to an external network). Server2 has a local IP of 192.168.0.2 and a host name of host2.mydomain.com. QUESTION 1: If an application on server1 sends traffic to server2 using a host name of host2.mydomain.com, what determines whether this traffic is routed to server2 using the local or external network? QUESTION 2: To ensure that all traffic sent from server1 to server2 always uses the local network, could I simply include in the server1 /etc/hosts file the following? 192.168.0.2 host2.mydomain.com ...the thinking being, if the servers are always on the same network there should never be a need for server2 to send traffic to server1 via the external network (that I can think of anyway). Is this done in practice, or is some other method preferred?

  Read the article

• Can I create a DC without a DNS Server?

  - by onik

  So as the title says, I need to promote a standalone Win2008R2 server to a Domain Controller, and I don't a DNS Server (I think), as there will be no clients connected to the domain, it will be only used for Remote Desktop Services. Yes, I know, it's considered bad practice to install other roles on the DC, but in this case, it's necessary. Do I need to install the DNS Server, and if I do, how to make it as transparent as possible? EDIT: Seems that I need to install the DNS Server, so I can I configure it not to mess up my entire domain? For example: The server I need to promote is rdc.mydomain.com, and it has an A entry to it's IP in the current DNS, while other servers under mydomain.com are running Linux and don't need to know anything about this Windows box. The domain uses a third-party DNS and all edits and updates need to be done via a separate web page, our servers don't have write/update access.

  Read the article

• What do light purple color mean in uTorrent

  - by blasteralfred

  I run uTorrent 3.1.2 in my Windows 7 PC. When I download one file, I see some purple colored lines under Files Tab Pieces. Below is an image of what I am telling (little resized); I think that the light green color indicates downloaded parts. But I have no idea about purple lines. The file is a streamable mp3 file. The connection speed is very low, about 5KB/s down and 1KB/s up. The done file size is not progressing in a smooth way (usually changes in KB are visible), it stays as it is for sometime and then changes to a size (changes in MB), and again the same thing. Questions: Why does this happen? What does the purple color mean? Thank you.

  Read the article

• SharePoint 2013 Developer Ramp-Up - Part 2

  As stated already yesterday, today I continued with the available course material on Pluralsight. For sure interesting topics in the second part of the series but not the field of operation I'm going to work in later. During the course you get a lot of information about how to create and deploy SharePoint Solutions and hosted SharePoint Apps. Today's resource(s) Apart from some blog articles I watched in the following course today: SharePoint 2013 Developer Ramp-Up - Part 2 - Developing SharePoint Solutions and Apps Not thrilling but still two solid hours to go. Takeaway One of the coolest aspects I figured out today is that SharePoint development can be done easily in JavaScript and C# - just as you like or prefer. It's actually pretty cool to see that you could integrate external JS libraries like datajs, knockout,js and so forth in order to implement your solution. And that you should be very familiar with Microsoft PowerShell. Not only to simplify some repetitive work but also to do be able to get things going in SharePoint. Having a decent background knowledge in Linux, I find this pretty amusing and remember the initial baby steps when PowerShell was introduced some years back (Note: German language). The outcry as well as the hype was too funny. Honestly, I have kind of mixed feelings about today's progress. Surely, there was interesting information about developing extensions directly for and in SharePoint... Hm, I'll leave that one for now and probably it might be helpful someday.

  Read the article

• Sonicwall Global VPN Client fails to connect, despite successful connections from other computers from behind the same router

  - by JesperE

  I've recently been unable to connect to our Sonicwall VPN at work. The Sonicwall client is stuck on "connecting", and the log says "The peer is not responding to phase1 ISAKMP requests". The weird thing is that this is not an issue with my own PC, only my work laptop (Lenovo W530 running Windows 7 64-bit), and this has only appeared recently. This ought to rule out any problems with my ISP blocking VPN, or issues with the router itself. My company's IT department says that they cannot see anything in their logs when I'm trying to connect. My conclusion is that something is wrong on the laptop itself. Disabling the firewall does not help. Can the VPN connection be blocked in other ways? What should I be looking for? EDIT: This problem has "magically" disappeared, without any changes done in my network. I can only assume that this was caused by some network glitch with my ISP.

  Read the article

• Is this a ridiculous way to structure a DB schema, or am I completely missing something?

  - by Jim

  I have done a fair bit of work with relational databases, and think I understand the basic concepts of good schema design pretty well. I recently was tasked with taking over a project where the DB was designed by a highly-paid consultant. Please let me know if my gut intinct - "WTF??!?" - is warranted, or is this guy such a genius that he's operating out of my realm? DB in question is an in-house app used to enter requests from employees. Just looking at a small section of it, you have information on the users, and information on the request being made. I would design this like so: User table: UserID (primary Key, indexed, no dupes) FirstName LastName Department Request table RequestID (primary Key, indexed, no dupes) <...> various data fields containing request details UserID -- foreign key associated with User table Simple, right? Consultant designed it like this (with sample data): UsersTable UserID FirstName LastName 234 John Doe 516 Jane Doe 123 Foo Bar DepartmentsTable DepartmentID Name 1 Sales 2 HR 3 IT UserDepartmentTable UserDepartmentID UserID Department 1 234 2 2 516 2 3 123 1 RequestTable RequestID UserID <...> 1 516 blah 2 516 blah 3 234 blah The entire database is constructed like this, with every piece of data encapsulated in its own table, with numeric IDs linking everything together. Apparently the consultant had read about OLAP and wanted the 'speed of integer lookups' He also has a large number of stored procedures to cross reference all of these tables. Is this valid design for a small to mid-sized SQL DB? Thanks for comments/answers...

  Read the article

• osx 10.6 dhcp client-id option

  - by Clustermagnet

  Trying to join a osx machine on a dhcp network which forces certain client IDs. Even if I was to modify the client-id via the network properties, the DHCP server is not accepting this request, since Windows and Apple send this via different options You can set the ClassID in the Network Control Panel in the DHCP Client ID box. The trick lies in setting up your DHCP server to recognize it. Windows XP sends the DHCP class ID via DHCP option 77, and OS X sends it via option 61. You'll have to set your DHCP server to check for option 61, +with an offset of 1 and a length of 9+. That's the tricky bit. So, without modifying the DHCP server... (which does not belong to me), is there anything that can be done on OSX to modify the client-id option to be 77?

  Read the article

• windows 7 is not working with Ubuntu 12.04

  - by Anand Soni

  I have one problem, I am unable to start windows 7 which is installed with Ubuntu 12.04 because I want to utilize all resource in diff. OS. Let me tell you the installation I have done. I have installed everything with USB because my CD ROM is damaged. 1) I have installed Windows 7 in c: then I have installed Ubuntu 12.04 in C: Now when I start my PC it shows list of OS first like -Ubuntu 12.04 -Windows 7 When I click on Windows 7 it do not starts and again shows the list of OS. I have also tried to reinstall the windows 7 using USB but it gives error of something UI or Boot configuration error. Even now Ubuntu 12.04 is also not reinstalling. Now what I want to do is install windows 7 and install ubuntu 12.04 in virtual box so that I can run both system as this is not working. But can't because I can't open Window 7 even can't format my drive. Please suggest something.

  Read the article

• How can state changes be batched while adhering to opaque-front-to-back/alpha-blended-back-to-front?

  - by Sion Sheevok

  This is a question I've never been able to find the answer to. Batching objects with similar states is a major performance gain when rendering many objects. However, I've been learned various rules when drawing objects in the game world. Draw all opaque objects, front-to-back. Draw all alpha-blended objects, back-to-front. Some of the major parameters to batch by, as I understand it, are textures, vertex buffers, and index buffers. It seems that, as long as you are adhering to the above two rules, there's little to be done in regards to batching. I see one possibility to batch, while still adhering to the above two rules. Opaque objects can still be drawn out of depth-order, because drawing them front-to-back is merely a fillrate optimization, meanwhile state changes may very well be far more expensive than the overdraw of drawing out of depth-order. However, non-opaque objects, those that require alpha-blending at least, must be drawn back-to-front in order to avoid rendering artifacts. Is the loss of the fillrate optimization for opaques worth the state batching optimization?

  Read the article

• Mesh with Alpha Texture doesn't blend properly

  - by faulty

  I've followed example from various place regarding setting OutputMerger's BlendState to enable alpha/transparent texture on mesh. The setup is as follows: var transParentOp = new BlendStateDescription { SourceBlend = BlendOption.SourceAlpha, DestinationBlend = BlendOption.InverseDestinationAlpha, BlendOperation = BlendOperation.Add, SourceAlphaBlend = BlendOption.Zero, DestinationAlphaBlend = BlendOption.Zero, AlphaBlendOperation = BlendOperation.Add, }; I've made up a sample that display 3 mesh A, B and C, where each overlaps one another. They are drawn sequentially, A to C. Distance from camera where A is nearest and C is furthest. So, the expected output is that A see through and saw part of B and C. B will see through and saw part of C. But what I get was none of them see through in that order, but if I move C closer to the camera, then it will be semi transparent and see through A and B. B if move closer to camera will see A but not C. Sort of reverse. So it seems that I need to draw them in reverse order where furthest from camera is drawn first then nearest to camera is drawn last. Is it suppose to be done this way, or I can actually configure the blendstate so it works no matter in which order i draw them? Thanks

  Read the article

< Previous Page | 418 419 420 421 422 423 424 425 426 427 428 429  | Next Page >