Search Results

Search found 12068 results on 483 pages for 'sv gets'.

Page 422/483 | < Previous Page | 418 419 420 421 422 423 424 425 426 427 428 429  | Next Page >

• Building a database installer with WiX, datadude and Visual Studio 2010

  - by jamiet

  Today I have been using Windows Installer XML (WiX) to build an installer (.msi file) that would install a SQL Server database on a server of my choosing; the source code for that database lives in datadude (a tool which you may know by one of quite a few other names). The basis for this work was a most excellent blog post by Duke Kamstra entitled Implementing a WIX installer that calls the GDR version of VSDBCMD.EXE which coves the delicate intricacies of doing this – particularly how to call Vsdbcmd.exe in a CustomAction. Unfortunately there are a couple of things wrong with Duke’s post: Searching for “datadude wix” didn’t turn it up in the first page of search results and hence it took me a long time to find it. And I knew that it existed. If someone else were after a post on using WiX with datadude its likely that they would never have come across Duke’s post and that would be a great shame because its the definitive post on the matter. It was written in October 2009 and had not been updated for Visual Studio 2010. Well, this blog post is an attempt to solve those problems. Hopefully I’ve solved the first one just by following a few of my blogging SEO tips while writing this blog post, in the rest of it I will explain how I took Duke’s code and updated it to work in Visual Studio 2010. If you need to build a database installer using WiX, datadude and Visual Studio 2010 then you still need to follow Duke’s blog post so go and do that now. Below are the amendments that I made that enabled the project to get built in Visual Studio 2010: In VS2010 datadude’s output files have changed from being called Database.<suffix> to <ProjectName>_Database.<suffix>. Duke’s code was referencing the old file name formats. Duke used $(var.SolutionDir) and relative paths to point to datadude artefacts I have replaced these with Votive Project References http://wix.sourceforge.net/manual-wix3/votive_project_references.htm I commented out all references to MicrosoftSqlTypesDbschema in DatabaseArtifacts.wxi. I don't think this is produced in VS2010 (I may be wrong about that but it wasn't in the output from my project) Similarly I commented out component MicrosoftSqlTypesDbschema in VsdbcmdArtifacts.wxi. It wasn't where Duke's code said it should have been so am assuming/hoping it isn't needed. Duke's ?define block to work out appropriate SrcArchPath actually wasn't working for me (i.e. <?if $(var.Platform)=x64 ?> was evaluating to false)  so I just took out the conditional stuff and declared the path explicitly to the “Program Files (x86)” path. The old code is still there though if you need to put it back. None of the <RegistrySearch> stuff is needed for VS2010 - so I commented it all out! Changed to use /manifest option rather than /model option on vsdbcmd.exe command-line. Personal preference is all! Added a new component in order to bundle along the vsdbcmd.exe.config file Made the install of the Custom Action dependent on the relevant feature being selected for install. This one is actually really important – deselecting the database feature for installation does not, by default, stop the CustomAction from executing and so would cause an error - so that scenario needs to be catered for I have made my amended solution available for download at: http://cid-550f681dad532637.office.live.com/self.aspx/Public/BlogShare/20110210/InstallMyDatabase.zip It contains two projects: the WiX project and the datadude project that is the source to be deployed (for demo purposes it only contains one table). I have also made the .msi available although in order that it gets through file blockers I changed the name from InstallMyDatabase.msi to InstallMyDatabase.ms_ – simply rename the file back once you have downloaded it from: http://cid-550f681dad532637.office.live.com/self.aspx/Public/BlogShare/20110210/InstallMyDatabase.ms%5E_ .You can try it out for yourself – the only thing it does is dump the files into %Program Files%\MyDatabase and uses them to install a database onto a server of your choosing with a name of your choosing - no damaging side-affects. I will caveat this by saying “it works on my machine” and, not having access to a plethora of different machines, I haven’t tested it anywhere else. One potential issue that I know of is that Vsdbcmd.exe has a dependency on SQL Server CE although if you have SQL Server tools or Visual Studio installed you should be fine. Unfortunately its not possible to bundle along the SQL Server CE installer in the .msi because Windows will not allow you to call one installer from inside another – the recommended way to get around this problem is to build a bootstrapper to bundle the whole lot together but doing that is outside the scope of this blog post. If you discover any other issues then please let me know. Here are the screenshots from the installer: And once installed…. Hope this is useful! @jamiet 

  Read the article

• Linux-Containers — Part 1: Overview

  - by Lenz Grimmer

  "Containers" by Jean-Pierre Martineau (CC BY-NC-SA 2.0). Linux Containers (LXC) provide a means to isolate individual services or applications as well as of a complete Linux operating system from other services running on the same host. To accomplish this, each container gets its own directory structure, network devices, IP addresses and process table. The processes running in other containers or the host system are not visible from inside a container. Additionally, Linux Containers allow for fine granular control of resources like RAM, CPU or disk I/O. Generally speaking, Linux Containers use a completely different approach than "classicial" virtualization technologies like KVM or Xen (on which Oracle VM Server for x86 is based on). An application running inside a container will be executed directly on the operating system kernel of the host system, shielded from all other running processes in a sandbox-like environment. This allows a very direct and fair distribution of CPU and I/O-resources. Linux containers can offer the best possible performance and several possibilities for managing and sharing the resources available. Similar to Containers (or Zones) on Oracle Solaris or FreeBSD jails, the same kernel version runs on the host as well as in the containers; it is not possible to run different Linux kernel versions or other operating systems like Microsoft Windows or Oracle Solaris for x86 inside a container. However, it is possible to run different Linux distribution versions (e.g. Fedora Linux in a container on top of an Oracle Linux host), provided it supports the version of the Linux kernel that runs on the host. This approach has one caveat, though - if any of the containers causes a kernel crash, it will bring down all other containers (and the host system) as well. For example, Oracle's Unbreakable Enterprise Kernel Release 2 (2.6.39) is supported for both Oracle Linux 5 and 6. This makes it possible to run Oracle Linux 5 and 6 container instances on top of an Oracle Linux 6 system. Since Linux Containers are fully implemented on the OS level (the Linux kernel), they can be easily combined with other virtualization technologies. It's certainly possible to set up Linux containers within a virtualized Linux instance that runs inside Oracle VM Server for Oracle VM Virtualbox. Some use cases for Linux Containers include: Consolidation of multiple separate Linux systems on one server: instances of Linux systems that are not performance-critical or only see sporadic use (e.g. a fax or print server or intranet services) do not necessarily need a dedicated server for their operations. These can easily be consolidated to run inside containers on a single server, to preserve energy and rack space. Running multiple instances of an application in parallel, e.g. for different users or customers. Each user receives his "own" application instance, with a defined level of service/performance. This prevents that one user's application could hog the entire system and ensures, that each user only has access to his own data set. It also helps to save main memory — if multiple instances of a same process are running, the Linux kernel can share memory pages that are identical and unchanged across all application instances. This also applies to shared libraries that applications may use, they are generally held in memory once and mapped to multiple processes. Quickly creating sandbox environments for development and testing purposes: containers that have been created and configured once can be archived as templates and can be duplicated (cloned) instantly on demand. After finishing the activity, the clone can safely be discarded. This allows to provide repeatable software builds and test environments, because the system will always be reset to its initial state for each run. Linux Containers also boot significantly faster than "classic" virtual machines, which can save a lot of time when running frequent build or test runs on applications. Safe execution of an individual application: if an application running inside a container has been compromised because of a security vulnerability, the host system and other containers remain unaffected. The potential damage can be minimized, analyzed and resolved directly from the host system. Note: Linux Containers on Oracle Linux 6 with the Unbreakable Enterprise Kernel Release 2 (2.6.39) are still marked as Technology Preview - their use is only recommended for testing and evaluation purposes. The Open-Source project "Linux Containers" (LXC) is driving the development of the technology behind this, which is based on the "Control Groups" (CGroups) and "Name Spaces" functionality of the Linux kernel. Oracle is actively involved in the Linux Containers development and contributes patches to the upstream LXC code base. Control Groups provide means to manage and monitor the allocation of resources for individual processes or process groups. Among other things, you can restrict the maximum amount of memory, CPU cycles as well as the disk and network throughput (in MB/s or IOP/s) that are available for an application. Name Spaces help to isolate process groups from each other, e.g. the visibility of other running processes or the exclusive access to a network device. It's also possible to restrict a process group's access and visibility of the entire file system hierarchy (similar to a classic "chroot" environment). CGroups and Name Spaces provide the foundation on which Linux containers are based on, but they can actually be used independently as well. A more detailed description of how Linux Containers can be created and managed on Oracle Linux will be explained in the second part of this article. Additional links related to Linux Containers: OTN Article: The Role of Oracle Solaris Zones and Linux Containers in a Virtualization Strategy Linux Containers on Wikipedia - Lenz Grimmer Follow me on: Personal Blog | Facebook | Twitter | Linux Blog |

  Read the article

• Pure Server-Side Filtering with RadGridView and WCF RIA Services

  Those of you who are familiar with WCF RIA Services know that the DomainDataSource control provides a FilterDescriptors collection that enables you to filter data returned by the query on the server. We have been using this DomainDataSource feature in our RIA Services with DomainDataSource online example for almost an year now. In the example, we are listening for RadGridViews Filtering event in order to intercept any filtering that is performed on the client and translate it to something that the DomainDataSource will understand, in this case a System.Windows.Data.FilterDescriptor being added or removed from its FilterDescriptors collection. Think of RadGridView.FilterDescriptors as client-side filtering and of DomainDataSource.FilterDescriptors as server-side filtering. We no longer need the client-side one. With the introduction of the Custom Filtering Controls feature many new possibilities have opened. With these custom controls we no longer need to do any filtering on the client. I have prepared a very small project that demonstrates how to filter solely on the server by using a custom filtering control. As I have already mentioned filtering on the server is done through the FilterDescriptors collection of the DomainDataSource control. This collection holds instances of type System.Windows.Data.FilterDescriptor. The FilterDescriptor has three important properties: PropertyPath: Specifies the name of the property that we want to filter on (the left operand). Operator: Specifies the type of comparison to use when filtering. An instance of FilterOperator Enumeration. Value: The value to compare with (the right operand). An instance of the Parameter Class. By adding filters, you can specify that only entities which meet the condition in the filter are loaded from the domain context. In case you are not familiar with these concepts you might find Brad Abrams blog interesting. Now, our requirements are to create some kind of UI that will manipulate the DomainDataSource.FilterDescriptors collection. When it comes to collections, my first choice of course would be RadGridView. If you are not familiar with the Custom Filtering Controls concept I would strongly recommend getting acquainted with my step-by-step tutorial Custom Filtering with RadGridView for Silverlight and checking the online example out. I have created a simple custom filtering control that contains a RadGridView and several buttons. This control is aware of the DomainDataSource instance, since it is operating on its FilterDescriptors collection. In fact, the RadGridView that is inside it is bound to this collection. In order to display filters that are relevant for the current column only, I have applied a filter to the grid. This filter is a Telerik.Windows.Data.FilterDescriptor and is used to filter the little grid inside the custom control. It should not be confused with the DomainDataSource.FilterDescriptors collection that RadGridView is actually bound to. These are the RIA filters. Additionally, I have added several other features. For example, if you have specified a DataFormatString on your original column, the Value column inside the custom control will pick it up and format the filter values accordingly. Also, I have transferred the data type of the column that you are filtering to the Value column of the custom control. This will help the little RadGridView determine what kind of editor to show up when you begin edit, for example a date picker for DateTime columns. Finally, I have added four buttons two of them can be used to add or remove filters and the other two will communicate the changes you have made to the server. Here is the full source code of the DomainDataSourceFilteringControl. The XAML: <UserControl x:Class="PureServerSideFiltering.DomainDataSourceFilteringControl"    xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"    xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"     xmlns:telerikGrid="clr-namespace:Telerik.Windows.Controls;assembly=Telerik.Windows.Controls.GridView"     xmlns:telerik="clr-namespace:Telerik.Windows.Controls;assembly=Telerik.Windows.Controls"     Width="300">     <Border x:Name="LayoutRoot"             BorderThickness="1"             BorderBrush="#FF8A929E"             Padding="5"             Background="#FFDFE2E5">           <Grid>             <Grid.RowDefinitions>                 <RowDefinition Height="Auto"/>                 <RowDefinition Height="150"/>                 <RowDefinition Height="Auto"/>             </Grid.RowDefinitions>               <StackPanel Grid.Row="0"                         Margin="2"                         Orientation="Horizontal"                         HorizontalAlignment="Center">                 <telerik:RadButton Name="addFilterButton"                                   Click="OnAddFilterButtonClick"                                   Content="Add Filter"                                   Margin="2"                                   Width="96"/>                 <telerik:RadButton Name="removeFilterButton"                                   Click="OnRemoveFilterButtonClick"                                   Content="Remove Filter"                                   Margin="2"                                   Width="96"/>             </StackPanel>               <telerikGrid:RadGridView Name="filtersGrid"                                     Grid.Row="1"                                     Margin="2"                                     ItemsSource="{Binding FilterDescriptors}"                                     AddingNewDataItem="OnFilterGridAddingNewDataItem"                                     ColumnWidth="*"                                     ShowGroupPanel="False"                                     AutoGenerateColumns="False"                                     CanUserResizeColumns="False"                                     CanUserReorderColumns="False"                                     CanUserFreezeColumns="False"                                     RowIndicatorVisibility="Collapsed"                                     IsFilteringAllowed="False"                                     CanUserSortColumns="False">                 <telerikGrid:RadGridView.Columns>                     <telerikGrid:GridViewComboBoxColumn DataMemberBinding="{Binding Operator}"                                                         UniqueName="Operator"/>                     <telerikGrid:GridViewDataColumn Header="Value"                                                     DataMemberBinding="{Binding Value.Value}"                                                     UniqueName="Value"/>                 </telerikGrid:RadGridView.Columns>             </telerikGrid:RadGridView>               <StackPanel Grid.Row="2"                         Margin="2"                         Orientation="Horizontal"                         HorizontalAlignment="Center">                 <telerik:RadButton Name="filterButton"                                   Click="OnApplyFiltersButtonClick"                                   Content="Apply Filters"                                   Margin="2"                                   Width="96"/>                 <telerik:RadButton Name="clearButton"                                   Click="OnClearFiltersButtonClick"                                   Content="Clear Filters"                                   Margin="2"                                   Width="96"/>             </StackPanel>           </Grid>       </Border> </UserControl>   And the code-behind: using System; using System.Collections.Generic; using System.Linq; using System.Net; using System.Windows; using System.Windows.Controls; using System.Windows.Documents; using System.Windows.Input; using System.Windows.Media; using System.Windows.Media.Animation; using System.Windows.Shapes; using Telerik.Windows.Controls.GridView; using System.Windows.Data; using Telerik.Windows.Controls; using Telerik.Windows.Data;   namespace PureServerSideFiltering {     /// <summary>     /// A custom filtering control capable of filtering purely server-side.     /// </summary>     public partial class DomainDataSourceFilteringControl : UserControl, IFilteringControl     {         // The main player here.         DomainDataSource domainDataSource;           // This is the name of the property that this column displays.         private string dataMemberName;           // This is the type of the property that this column displays.         private Type dataMemberType;           /// <summary>         /// Identifies the <see cref="IsActive"/> dependency property.         /// </summary>         /// <remarks>         /// The state of the filtering funnel (i.e. full or empty) is bound to this property.         /// </remarks>         public static readonly DependencyProperty IsActiveProperty =             DependencyProperty.Register(                 "IsActive",                 typeof(bool),                 typeof(DomainDataSourceFilteringControl),                 new PropertyMetadata(false));           /// <summary>         /// Gets or sets a value indicating whether the filtering is active.         /// </summary>         /// <remarks>         /// Set this to true if you want to lit-up the filtering funnel.         /// </remarks>         public bool IsActive         {             get { return (bool)GetValue(IsActiveProperty); }             set { SetValue(IsActiveProperty, value); }         }           /// <summary>         /// Gets or sets the domain data source.         /// We need this in order to work on its FilterDescriptors collection.         /// </summary>         /// <value>The domain data source.</value>         public DomainDataSource DomainDataSource         {             get { return this.domainDataSource; }             set { this.domainDataSource = value; }         }           public System.Windows.Data.FilterDescriptorCollection FilterDescriptors         {             get { return this.DomainDataSource.FilterDescriptors; }         }           public DomainDataSourceFilteringControl()         {             InitializeComponent();         }           public void Prepare(GridViewBoundColumnBase column)         {             this.LayoutRoot.DataContext = this;               if (this.DomainDataSource == null)             {                 // Sorry, but we need a DomainDataSource. Can't do anything without it.                 return;             }               // This is the name of the property that this column displays.             this.dataMemberName = column.GetDataMemberName();               // This is the type of the property that this column displays.             // We need this in order to see which FilterOperators to feed to the combo-box column.             this.dataMemberType = column.DataType;               // We will use our magic Type extension method to see which operators are applicable for             // this data type. You can go to the extension method body and see what it does.             ((GridViewComboBoxColumn)this.filtersGrid.Columns["Operator"]).ItemsSource                 = this.dataMemberType.ApplicableFilterOperators();               // This is very nice as well. We will tell the Value column its data type. In this way             // RadGridView will pick up the best editor according to the data type. For example,             // if the data type of the value is DateTime, you will be editing it with a DatePicker.             // Nice!             ((GridViewDataColumn)this.filtersGrid.Columns["Value"]).DataType = this.dataMemberType;               // Yet another nice feature. We will transfer the original DataFormatString (if any) to             // the Value column. In this way if you have specified a DataFormatString for the original             // column, you will see all filter values formatted accordingly.             ((GridViewDataColumn)this.filtersGrid.Columns["Value"]).DataFormatString = column.DataFormatString;               // This is important. Since our little filtersGrid will be bound to the entire collection             // of this.domainDataSource.FilterDescriptors, we need to set a Telerik filter on the             // grid so that it will display FilterDescriptor which are relevane to this column ONLY!             Telerik.Windows.Data.FilterDescriptor columnFilter = new Telerik.Windows.Data.FilterDescriptor("PropertyPath"                 , Telerik.Windows.Data.FilterOperator.IsEqualTo                 , this.dataMemberName);             this.filtersGrid.FilterDescriptors.Add(columnFilter);               // We want to listen for this in order to activate and de-activate the UI funnel.             this.filtersGrid.Items.CollectionChanged += this.OnFilterGridItemsCollectionChanged;         }           /// <summary>         // Since the DomainDataSource is a little bit picky about adding uninitialized FilterDescriptors         // to its collection, we will prepare each new instance with some default values and then         // the user can change them later. Go to the event handler to see how we do this.         /// </summary>         void OnFilterGridAddingNewDataItem(object sender, GridViewAddingNewEventArgs e)         {             // We need to initialize the new instance with some values and let the user go on from here.             System.Windows.Data.FilterDescriptor newFilter = new System.Windows.Data.FilterDescriptor();               // This is a must. It should know what member it is filtering on.             newFilter.PropertyPath = this.dataMemberName;               // Initialize it with one of the allowed operators.             // TypeExtensions.ApplicableFilterOperators method for more info.             newFilter.Operator = this.dataMemberType.ApplicableFilterOperators().First();               if (this.dataMemberType == typeof(DateTime))             {                 newFilter.Value.Value = DateTime.Now;             }             else if (this.dataMemberType == typeof(string))             {                 newFilter.Value.Value = "<enter text>";             }             else if (this.dataMemberType.IsValueType)             {                 // We need something non-null for all value types.                 newFilter.Value.Value = Activator.CreateInstance(this.dataMemberType);             }               // Let the user edit the new filter any way he/she likes.             e.NewObject = newFilter;         }           void OnFilterGridItemsCollectionChanged(object sender, System.Collections.Specialized.NotifyCollectionChangedEventArgs e)         {             // We are active only if we have any filters define. In this case the filtering funnel will lit-up.             this.IsActive = this.filtersGrid.Items.Count > 0;         }           private void OnApplyFiltersButtonClick(object sender, RoutedEventArgs e)         {             if (this.DomainDataSource.IsLoadingData)             {                 return;             }               // Comment this if you want the popup to stay open after the button is clicked.             this.ClosePopup();               // Since this.domainDataSource.AutoLoad is false, this will take into             // account all filtering changes that the user has made since the last             // Load() and pull the new data to the client.             this.DomainDataSource.Load();         }           private void OnClearFiltersButtonClick(object sender, RoutedEventArgs e)         {             if (this.DomainDataSource.IsLoadingData)             {                 return;             }               // We want to remove ONLY those filters from the DomainDataSource             // that this control is responsible for.             this.DomainDataSource.FilterDescriptors                 .Where(fd => fd.PropertyPath == this.dataMemberName) // Only "our" filters.                 .ToList()                 .ForEach(fd => this.DomainDataSource.FilterDescriptors.Remove(fd)); // Bye-bye!               // Comment this if you want the popup to stay open after the button is clicked.             this.ClosePopup();               // After we did our housekeeping, get the new data to the client.             this.DomainDataSource.Load();         }           private void OnAddFilterButtonClick(object sender, RoutedEventArgs e)         {             if (this.DomainDataSource.IsLoadingData)             {                 return;             }               // Let the user enter his/or her requirements for a new filter.             this.filtersGrid.BeginInsert();             this.filtersGrid.UpdateLayout();         }           private void OnRemoveFilterButtonClick(object sender, RoutedEventArgs e)         {             if (this.DomainDataSource.IsLoadingData)             {                 return;             }               // Find the currently selected filter and destroy it.             System.Windows.Data.FilterDescriptor filterToRemove = this.filtersGrid.SelectedItem as System.Windows.Data.FilterDescriptor;             if (filterToRemove != null                 && this.DomainDataSource.FilterDescriptors.Contains(filterToRemove))             {                 this.DomainDataSource.FilterDescriptors.Remove(filterToRemove);             }         }           private void ClosePopup()         {             System.Windows.Controls.Primitives.Popup popup = this.ParentOfType<System.Windows.Controls.Primitives.Popup>();             if (popup != null)             {                 popup.IsOpen = false;             }         }     } }   Finally, we need to tell RadGridViews Columns to use this custom control instead of the default one. Here is how to do it: using System; using System.Collections.Generic; using System.Linq; using System.Net; using System.Windows; using System.Windows.Controls; using System.Windows.Documents; using System.Windows.Input; using System.Windows.Media; using System.Windows.Media.Animation; using System.Windows.Shapes; using System.Windows.Data; using Telerik.Windows.Data; using Telerik.Windows.Controls; using Telerik.Windows.Controls.GridView;   namespace PureServerSideFiltering {     public partial class MainPage : UserControl     {         public MainPage()         {             InitializeComponent();             this.grid.AutoGeneratingColumn += this.OnGridAutoGeneratingColumn;               // Uncomment this if you want the DomainDataSource to start pre-filtered.             // You will notice how our custom filtering controls will correctly read this information,             // populate their UI with the respective filters and lit-up the funnel to indicate that             // filtering is active. Go ahead and try it.             this.employeesDataSource.FilterDescriptors.Add(new System.Windows.Data.FilterDescriptor("Title", System.Windows.Data.FilterOperator.Contains, "Assistant"));             this.employeesDataSource.FilterDescriptors.Add(new System.Windows.Data.FilterDescriptor("HireDate", System.Windows.Data.FilterOperator.IsGreaterThan, new DateTime(1998, 12, 31)));             this.employeesDataSource.FilterDescriptors.Add(new System.Windows.Data.FilterDescriptor("HireDate", System.Windows.Data.FilterOperator.IsLessThanOrEqualTo, new DateTime(1999, 12, 31)));               this.employeesDataSource.Load();         }           /// <summary>         /// First of all, we will need to replace the default filtering control         /// of each column with out custom filtering control DomainDataSourceFilteringControl         /// </summary>         private void OnGridAutoGeneratingColumn(object sender, GridViewAutoGeneratingColumnEventArgs e)         {             GridViewBoundColumnBase dataColumn = e.Column as GridViewBoundColumnBase;             if (dataColumn != null)             {                 // We do not like ugly dates.                 if (dataColumn.DataType == typeof(DateTime))                 {                     dataColumn.DataFormatString = "{0:d}"; // Short date pattern.                       // Notice how this format will be later transferred to the Value column                     // of the grid that we have inside the DomainDataSourceFilteringControl.                 }                   // Replace the default filtering control with our.                 dataColumn.FilteringControl = new DomainDataSourceFilteringControl()                 {                     // Let the control know about the DDS, after all it will work directly on it.                     DomainDataSource = this.employeesDataSource                 };                   // Finally, lit-up the filtering funnel through the IsActive dependency property                 // in case there are some filters on the DDS that match our column member.                 string dataMemberName = dataColumn.GetDataMemberName();                 dataColumn.FilteringControl.IsActive =                     this.employeesDataSource.FilterDescriptors                     .Where(fd => fd.PropertyPath == dataMemberName)                     .Count() > 0;             }         }     } } The best part is that we are not only writing filters for the DomainDataSource we can read and load them. If the DomainDataSource has some pre-existing filters (like I have created in the code above), our control will read them and will populate its UI accordingly. Even the filtering funnel will light-up! Remember, the funnel is controlled by the IsActive property of our control. While this is just a basic implementation, the source code is absolutely yours and you can take it from here and extend it to match your specific business requirements. Below the main grid there is another debug grid. With its help you can monitor what filter descriptors are added and removed to the domain data source. Download Source Code. (You will have to have the AdventureWorks sample database installed on the default SQLExpress instance in order to run it.) Enjoy!Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• SQL SERVER – Disabled Index and Update Statistics

  - by pinaldave

  When we try to update the statistics, it throws an error as if the clustered index is disabled. Now let us enable the clustered index only and attempt to update the statistics of the table right after that. Have you ever come across the situation where a conversation never gets over and it continues even though original point of discussion has passed. I am facing the same situation in the case of Disabled Index. Here is the link to original conversations. SQL SERVER – Disable Clustered Index and Data Insert – Reader had a issue here with Disabled Index SQL SERVER – Understanding ALTER INDEX ALL REBUILD with Disabled Clustered Index – Reader asked the effect of Rebuilding Indexes The same reader asked me today – “I understood what the disabled indexes do; what is their effect on statistics. Is it true that even though indexes are disabled, they continue updating the statistics?“ The answer is very interesting: If you have disabled clustered index, you will be not able to update the statistics at all for any index. If you have enabled clustered index and disabled non clustered index when you update the statistics of the table, it automatically updates the statistics of the ALL (disabled and enabled – both) the indexes on the table. If you are not satisfied with the answer, let us go over a simple example. I have written necessary comments in the code itself to have a clear idea. USE tempdb GO -- Drop Table if Exists IF EXISTS (SELECT * FROM sys.objects WHERE OBJECT_ID = OBJECT_ID(N'[dbo].[TableName]') AND type IN (N'U')) DROP TABLE [dbo].[TableName] GO -- Create Table CREATE TABLE [dbo].[TableName]( [ID] [int] NOT NULL, [FirstCol] [varchar](50) NULL ) GO -- Insert Some data INSERT INTO TableName SELECT 1, 'First' UNION ALL SELECT 2, 'Second' UNION ALL SELECT 3, 'Third' UNION ALL SELECT 4, 'Fourth' UNION ALL SELECT 5, 'Five' GO -- Create Clustered Index ALTER TABLE [TableName] ADD CONSTRAINT [PK_TableName] PRIMARY KEY CLUSTERED ([ID] ASC) GO -- Create Nonclustered Index CREATE UNIQUE NONCLUSTERED INDEX [IX_NonClustered_TableName] ON [dbo].[TableName] ([FirstCol] ASC) GO -- Check that all the indexes are enabled SELECT OBJECT_NAME(OBJECT_ID), Name, type_desc, is_disabled FROM sys.indexes WHERE OBJECT_NAME(OBJECT_ID) = 'TableName' GO Now let us update the statistics of the table and check the statistics update date. -- Update the stats of table UPDATE STATISTICS TableName WITH FULLSCAN GO -- Check Statistics Last Updated Datetime SELECT name AS index_name, STATS_DATE(OBJECT_ID, index_id) AS StatsUpdated FROM sys.indexes WHERE OBJECT_ID = OBJECT_ID('TableName') GO Now let us disable the indexes and check if they are disabled using sys.indexes. -- Disable Indexes -- Disable Nonclustered Index ALTER INDEX [IX_NonClustered_TableName] ON [dbo].[TableName] DISABLE GO -- Disable Clustered Index ALTER INDEX [PK_TableName] ON [dbo].[TableName] DISABLE GO -- Check that all the indexes are disabled SELECT OBJECT_NAME(OBJECT_ID), Name, type_desc, is_disabled FROM sys.indexes WHERE OBJECT_NAME(OBJECT_ID) = 'TableName' GO Let us try to update the statistics of the table. -- Update the stats of table UPDATE STATISTICS TableName WITH FULLSCAN GO /* -- Above operation should thrown following error Msg 1974, Level 16, State 1, Line 1 Cannot perform the specified operation on table 'TableName' because its clustered index 'PK_TableName' is disabled. */ When we try to update the statistics it throws an error as it clustered index is disabled. Now let us enable the clustered index only and attempt to update the statistics of the table right after that. -- Now let us rebuild clustered index only ALTER INDEX [PK_TableName] ON [dbo].[TableName] REBUILD GO -- Check that all the indexes status SELECT OBJECT_NAME(OBJECT_ID), Name, type_desc, is_disabled FROM sys.indexes WHERE OBJECT_NAME(OBJECT_ID) = 'TableName' GO -- Check Statistics Last Updated Datetime SELECT name AS index_name, STATS_DATE(OBJECT_ID, index_id) AS StatsUpdated FROM sys.indexes WHERE OBJECT_ID = OBJECT_ID('TableName') GO -- Update the stats of table UPDATE STATISTICS TableName WITH FULLSCAN GO -- Check Statistics Last Updated Datetime SELECT name AS index_name, STATS_DATE(OBJECT_ID, index_id) AS StatsUpdated FROM sys.indexes WHERE OBJECT_ID = OBJECT_ID('TableName') GO We can clearly see that even though the nonclustered index is disabled it is also updated. If you do not need a nonclustered index, I suggest you to drop it as keeping them disabled is an overhead on your system. This is because every time the statistics are updated for system all the statistics for disabled indexesare also updated. -- Clean up DROP TABLE [TableName] GO The complete script is given below for easy reference. USE tempdb GO -- Drop Table if Exists IF EXISTS (SELECT * FROM sys.objects WHERE OBJECT_ID = OBJECT_ID(N'[dbo].[TableName]') AND type IN (N'U')) DROP TABLE [dbo].[TableName] GO -- Create Table CREATE TABLE [dbo].[TableName]( [ID] [int] NOT NULL, [FirstCol] [varchar](50) NULL ) GO -- Insert Some data INSERT INTO TableName SELECT 1, 'First' UNION ALL SELECT 2, 'Second' UNION ALL SELECT 3, 'Third' UNION ALL SELECT 4, 'Fourth' UNION ALL SELECT 5, 'Five' GO -- Create Clustered Index ALTER TABLE [TableName] ADD CONSTRAINT [PK_TableName] PRIMARY KEY CLUSTERED ([ID] ASC) GO -- Create Nonclustered Index CREATE UNIQUE NONCLUSTERED INDEX [IX_NonClustered_TableName] ON [dbo].[TableName] ([FirstCol] ASC) GO -- Check that all the indexes are enabled SELECT OBJECT_NAME(OBJECT_ID), Name, type_desc, is_disabled FROM sys.indexes WHERE OBJECT_NAME(OBJECT_ID) = 'TableName' GO -- Update the stats of table UPDATE STATISTICS TableName WITH FULLSCAN GO -- Check Statistics Last Updated Datetime SELECT name AS index_name, STATS_DATE(OBJECT_ID, index_id) AS StatsUpdated FROM sys.indexes WHERE OBJECT_ID = OBJECT_ID('TableName') GO -- Disable Indexes -- Disable Nonclustered Index ALTER INDEX [IX_NonClustered_TableName] ON [dbo].[TableName] DISABLE GO -- Disable Clustered Index ALTER INDEX [PK_TableName] ON [dbo].[TableName] DISABLE GO -- Check that all the indexes are disabled SELECT OBJECT_NAME(OBJECT_ID), Name, type_desc, is_disabled FROM sys.indexes WHERE OBJECT_NAME(OBJECT_ID) = 'TableName' GO -- Update the stats of table UPDATE STATISTICS TableName WITH FULLSCAN GO /* -- Above operation should thrown following error Msg 1974, Level 16, State 1, Line 1 Cannot perform the specified operation on table 'TableName' because its clustered index 'PK_TableName' is disabled. */ -- Now let us rebuild clustered index only ALTER INDEX [PK_TableName] ON [dbo].[TableName] REBUILD GO -- Check that all the indexes status SELECT OBJECT_NAME(OBJECT_ID), Name, type_desc, is_disabled FROM sys.indexes WHERE OBJECT_NAME(OBJECT_ID) = 'TableName' GO -- Check Statistics Last Updated Datetime SELECT name AS index_name, STATS_DATE(OBJECT_ID, index_id) AS StatsUpdated FROM sys.indexes WHERE OBJECT_ID = OBJECT_ID('TableName') GO -- Update the stats of table UPDATE STATISTICS TableName WITH FULLSCAN GO -- Check Statistics Last Updated Datetime SELECT name AS index_name, STATS_DATE(OBJECT_ID, index_id) AS StatsUpdated FROM sys.indexes WHERE OBJECT_ID = OBJECT_ID('TableName') GO -- Clean up DROP TABLE [TableName] GO Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, SQL, SQL Authority, SQL Index, SQL Optimization, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: SQL Statistics

  Read the article

• My Interview with Microsoft

  - by Victor Hurdugaci

  This post is for those who want to apply or have already applied (but not finished the interview) for a Microsoft Job. The recruitment process is quite similar for everyone and consists of a few steps. Application E-Mail Interview Phone Interview On Site Interview I will tell you my story and how I went through the four phases. 1. Application My blog's title (Ex Nihilo Nihil Fit) means "Nothing Comes Out of Nothing". You can't get a job at Microsoft by not doing anything - this is true for anything else. The first step you need to complete is the application process. For this, many options are available. You can... ... apply online on Microsoft's Careers website as I did ... send your CV to different e-mail addresses (there are some dedicated e-mails for different positions) ... apply through some 3rd party organization (job shop, campus recruitment, job agency, etc) On MS Careers you just have to post your CV and choose the job you want. That's all! No recommendation letter, no cover letter, no nothing. Of course, not every CV passes the selection process. Here are some tips for improving your resume (worked for me): Don't write it just before applying! Write a draft version, wait a few days and then review it. This way you will find a lot of mistakes and stupid things you wrote initially. If you review it immediately after writing, your mind will not be criticism oriented and will just ignore mistakes. Repeat the write-wait-review process as many times as necessary, until you find that the review revealed no mistakes. After you did the final review and the CV is bullet-proof, ask others to review it. They will definitely find inconsistencies and mistakes and this will make you feel stupid. This is good because will open your eyes will make you go into an 'I want to improve' mode. You'll try to correct everything. After you come up with a modified version go again through steps 1 and 2. Repeat this as many times as necessary. [Special thanks to Lucian Sasu, Nadia Comanici, Andrei Ciobanu, Monica Balan and Lavinia Tanase for reviewing my CV!] Make it short and give only relevant facts. Initially, I come up with a 5 pages CV because I wrote every single technology with which I worked. There were a lot irrelevant things, I wrote Windows Workflow Foundation just because I played with it for a few days. I added extensive descriptions for every project, made a personal details section (name, birth date, address, etc) of 1/2 page. Others suggested to cut everything that was not necessary. You don't need to give extensive descriptions, just add a few words. For example, I wrote "VS Image Visualizer - Visual Studio 2008 debug visualizer for images" and added a link to the project's page - you submit formatted andcan embed links. Add something that makes it different. I don't know if this makes a difference, but I added some lines to separate items just like in the picture below. Definitely Microsoft gets thousands of CVs per day. You need something special. Don't lie! Tell exactly what you did and what is the proficiency level of your skills. For example, don't write "Advanced" for UML if you don't know the difference between composition and aggregation. Be realistic and don't under/over estimate yourself. Use the spell chick. Make sure everything is written in correct English and there are no grammar/spelling mistakes. Noddy likes a WC with grammar mi takes. You mght fail just because of that. Once you completed your CV, choose the job that suits best your needs, apply and wait... The waiting is a problem because all these big companies like Microsoft, Google, Mozilla, Apple, etc. will contact you only if they find something interesting in your application. If you're not suitable, then no rejection is sent. I applied for an Intern Software Development Engineer position at Microsoft Redmond. I cannot apply for a full time position because I want to finish the master program on time, in the next summer - an internship is just what I need. 2. E-Mail Interview January 20, 2010. Two months since I submitted the CV. I wasn't hoping anymore that MS will contact me, when I got an e-mail titled: "Victor Hurdugaci ES DK" from Holly Peterson saying: Read more >>

  Read the article

• SSAS Compare: an intern’s journey

  - by Red Gate Software BI Tools Team

  About a month ago, David mentioned an intern working in the BI Tools Team. That intern happens to be me! In five weeks’ time, I’ll start my second year of Computer Science at the University of Cambridge and be a full-time student again, but for the past eight weeks, I’ve been living a completely different life. As Jon mentioned before, the teams here at Red Gate are small and everyone (including the interns!) is responsible for the product as a whole. I’ve attended planning sessions, UX tests, daily meetings, and everything else a full-time member of the team would; I had as much say in where we would go next with the product as anyone; I was able to see that what I was doing was an important part of the product from the feedback we got in the UX tests. All these things almost made me forget that this is just an internship and not my full-time job. First steps at Red Gate Being based in Cambridge, Red Gate has many Cambridge university graduates working for them. They also hire some Cambridge undergraduates for internships each summer. With its popularity with university graduates and its great working environment, Red Gate has managed to build up a great reputation. When I thought of doing an internship here in Cambridge, Red Gate just seemed to be the obvious choice for my first real work experience. On my first day at Red Gate, David, the lead developer for SSAS Compare, helped me settle in and explained what I’d be doing. My task was to improve the user experience of displaying differences between MDX scripts by syntax highlighting, script formatting, and improving the difference identification in the first place. David suggested how I should approach the problem, but left all the details and design decisions to me. That was when I realised how much independence and responsibility I’d have. What I’ve done If you launch the latest version of SSAS Compare and drill down to an MDX script difference, you can see the changes that have been made. In earlier versions, you could only see the scripts in plain text on both sides — either in black or grey, depending on whether they were the same or not. However, you couldn’t see exactly where the scripts were different, which was especially annoying when the two scripts were large – as they often are. Furthermore, if parts of the two scripts were formatted differently, they seemed to be different but were actually the same, which caused even more confusion and made it difficult to see where the differences were. All these issues have been fixed now. The two scripts are automatically formatted by the tool so that if two things are syntactically equivalent, they look the same – including case differences in keywords! The actual difference is highlighted in grey, which makes them easy to spot. The difference identification has been improved as well, so two scripts aren’t identified as different if there’s just a difference in meaningless whitespace characters, or when you have “select” on one side and “SELECT” on the other. We also have syntax highlighting, which makes it easier to read the scripts. How I did it In order to do the formatting properly, we decided to parse the MDX scripts. After some investigation into parser builders, I decided to go with the GOLD Parser builder and the bsn-goldparser .NET engine. GOLD Parser builder provides a fairly nice GUI to write, build, and test grammar in. We also liked the idea of separating the grammar building from parsing a text. The bsn-goldparser is one of many .NET engines for GOLD, and although it doesn’t support the newest features of GOLD Parser, it has “the ability to map semantic action classes to terminals or reduction rules, so that a completely functional semantic AST can be created directly without intermediate token AST representation, and without the need for glue code.” That makes it much easier for us to change the implementation in our program when we change the grammar. As bsn-goldparser is open source, and I wanted some more features in it, I contributed two new features which have now been merged to the project. Unfortunately, there wasn’t an MDX grammar written for GOLD already, so I had to write it myself. I was referencing MSDN to get the formal grammar specification, but the specification was all over the place, so it wasn’t that easy to implement and find. We’re aware that we don’t yet fully support all valid MDX, so sometimes you’ll just see the MDX script difference displayed the old way. In that case, there is some grammar construct we don’t yet recognise. If you come across something SSAS Compare doesn’t recognise, we’d love to hear about it so we can add it to our grammar. When some MDX script gets parsed, a tree is produced. That tree can then be processed into a list of inlines which deal with the correct formatting and can be outputted to the screen. Doing all this has led me to many new technologies and projects I haven’t worked with before. This was my first experience with C# and Visual Studio, although I have done things in Java before. I have learnt how to unit test with NUnit, how to do dependency injection with Ninject, how to source-control code with SVN and Mercurial, how to build with TeamCity, how to use GOLD, and many other things. What’s coming next Sadly, my internship comes to an end this week, so there will be less development on MDX difference view for a while. But the team is going to work on marking the differences better and making it consistent with difference indication in the top part of comparison window, and will keep adding support for more MDX grammar so you can see the differences easily in every comparison you make. So long! And maybe I’ll see you next summer!

  Read the article

• Rob Blackwell on interoperability and Azure

  - by Eric Nelson

  At QCon in March we had a sample Azure application implemented in both Java and Ruby to demonstrate that the Windows Azure Platform is not just about .NET. The following is an interesting interview with Rob Blackwell, the R&D director of the partner who implemented the application. UK Interoperability Team Interviews Rob Blackwell, R&D Director at Active Web Solutions. Is Microsoft taking interoperability seriously? Yes. In the past, I think Microsoft has, quite rightly come in for criticism, but architects and developers should look at this again. The Interoperability Bridges site (http://www.interoperabilitybridges.com/ ) shows a wide range of projects that allow interoperability from Java, Ruby and PHP for example. The Windows Azure platform has been architected with interoperable APIs in mind. It's straightforward to access the various storage facilities from just about any language or platform. Azure compute is capable of running more than just C# applications! Why is interoperability important to you? My company provides consultancy and bespoke development services. We're a Microsoft Gold Partner, but we live in the real world where companies have a mix of technologies provided by a variety of vendors. When developing an enterprise software solution, you rarely have a completely blank canvas. We often see integration scenarios where we need to exchange data with legacy systems. It's not unusual to see modern Silverlight applications being built on top of Java or Mainframe based back ends. Could you give us some examples of where interoperability has been important for your projects? We developed an innovative Sea Safety system for the RNLI Lifeboats here in the UK. Commercial Fishing is one of the most dangerous professions and we helped developed the MOB Guardian System which uses satellite technology and man overboard devices to raise the alarm when a fisherman gets into trouble. The solution is implemented in .NET running on Windows, but without interoperable standards, it would have been impossible to communicate with the satellite gateway technology. For more information, please see the case study: http://www.microsoft.com/casestudies/Case_Study_Detail.aspx?CaseStudyID=4000005892 More recently, we were asked to build a web site to accompany the QCon 2010 conference in London to help demonstrate and promote interoperability. We built the site using Java and Restlet and hosted it in Windows Azure Compute. The site accepts feedback from visitors and all the data is stored in Windows Azure Storage. We also ported the application to Ruby on Rails for demonstration purposes. Visitors to the stand were surprised that this was even possible. Why should Java developers be interested in Windows Azure? Windows Azure Storage consists of Blobs, Queues and Tables. The storage is scalable, durable, secure and cost-effective. Using the WindowsAzure4j library, it's easy to use, and takes just a few lines of code. If you are writing an application with large data storage requirements, or you want an offsite backup, it makes a lot of sense. Running Java applications in Azure Compute is straightforward with tools like the Tomcat Solution Accelerator (http://code.msdn.microsoft.com/winazuretomcat )and AzureRunMe (http://azurerunme.codeplex.com/ ). The Windows Azure AppFabric Service Bus can also be used to connect heterogeneous systems running on different networks and in different data centres. How can The Service Bus be considered an interoperability solution? I think that the Windows Azure AppFabric Service Bus is one of Microsoft’s best kept secrets. Think of it as “a globally scalable application plumbing kit in the sky”. If you have used Enterprise Service Buses before, you’ll be familiar with the concept. Applications can connect to the service bus to securely exchange data – these can be point to point or multicast links. With the AppFabric Service Bus, the applications can exist anywhere that has access to the Internet and the connections can traverse firewalls. This makes it easy to extend or scale your application or reach out to other networks and technologies. For example, let’s say you have a SQL Server database running on premises and you want to expose the data to a Java application running in the cloud. You could set up a point to point Service Bus connection and use JDBC. Traditionally this would have been difficult or impossible without punching holes in firewalls and compromising security. Rob Blackwell is R&D Director at Active Web Solutions, www.aws.net , a Microsoft Gold Partner specialising in leading edge software solutions. He is an occasional writer and conference speaker and blogs at www.robblackwell.org.uk Related Links: UK Azure Online Community – join today. UK Windows Azure Site Start working with Windows Azure

  Read the article

• Getting the innermost .NET Exception

  - by Rick Strahl

  Here's a trivial but quite useful function that I frequently need in dynamic execution of code: Finding the innermost exception when an exception occurs, because for many operations (for example Reflection invocations or Web Service calls) the top level errors returned can be rather generic. A good example - common with errors in Reflection making a method invocation - is this generic error: Exception has been thrown by the target of an invocation In the debugger it looks like this: In this case this is an AJAX callback, which dynamically executes a method (ExecuteMethod code) which in turn calls into an Amazon Web Service using the old Amazon WSE101 Web service extensions for .NET. An error occurs in the Web Service call and the innermost exception holds the useful error information which in this case points at an invalid web.config key value related to the System.Net connection APIs. The "Exception has been thrown by the target of an invocation" error is the Reflection APIs generic error message that gets fired when you execute a method dynamically and that method fails internally. The messages basically says: "Your code blew up in my face when I tried to run it!". Which of course is not very useful to tell you what actually happened. If you drill down the InnerExceptions eventually you'll get a more detailed exception that points at the original error and code that caused the exception. In the code above the actually useful exception is two innerExceptions down. In most (but not all) cases when inner exceptions are returned, it's the innermost exception that has the information that is really useful. It's of course a fairly trivial task to do this in code, but I do it so frequently that I use a small helper method for this: /// <summary> /// Returns the innermost Exception for an object /// </summary> /// <param name="ex"></param> /// <returns></returns> public static Exception GetInnerMostException(Exception ex) { Exception currentEx = ex; while (currentEx.InnerException != null) { currentEx = currentEx.InnerException; } return currentEx; } This code just loops through all the inner exceptions (if any) and assigns them to a temporary variable until there are no more inner exceptions. The end result is that you get the innermost exception returned from the original exception. It's easy to use this code then in a try/catch handler like this (from the example above) to retrieve the more important innermost exception: object result = null; string stringResult = null; try { if (parameterList != null) // use the supplied parameter list result = helper.ExecuteMethod(methodToCall,target, parameterList.ToArray(), CallbackMethodParameterType.Json,ref attr); else // grab the info out of QueryString Values or POST buffer during parameter parsing // for optimization result = helper.ExecuteMethod(methodToCall, target, null, CallbackMethodParameterType.Json, ref attr); } catch (Exception ex) { Exception activeException = DebugUtils.GetInnerMostException(ex); WriteErrorResponse(activeException.Message, ( HttpContext.Current.IsDebuggingEnabled ? ex.StackTrace : null ) ); return; } Another function that is useful to me from time to time is one that returns all inner exceptions and the original exception as an array: /// <summary> /// Returns an array of the entire exception list in reverse order /// (innermost to outermost exception) /// </summary> /// <param name="ex">The original exception to work off</param> /// <returns>Array of Exceptions from innermost to outermost</returns> public static Exception[] GetInnerExceptions(Exception ex) {     List<Exception> exceptions = new List<Exception>();     exceptions.Add(ex);       Exception currentEx = ex;     while (currentEx.InnerException != null)     {         exceptions.Add(ex);     }       // Reverse the order to the innermost is first     exceptions.Reverse();       return exceptions.ToArray(); } This function loops through all the InnerExceptions and returns them and then reverses the order of the array returning the innermost exception first. This can be useful in certain error scenarios where exceptions stack and you need to display information from more than one of the exceptions in order to create a useful error message. This is rare but certain database exceptions bury their exception info in mutliple inner exceptions and it's easier to parse through them in an array then to manually walk the exception stack. It's also useful if you need to log errors and want to see the all of the error detail from all exceptions. None of this is rocket science, but it's useful to have some helpers that make retrieval of the critical exception info trivial. Resources DebugUtils.cs utility class in the West Wind Web Toolkit© Rick Strahl, West Wind Technologies, 2005-2011Posted in CSharp  .NET  

  Read the article

• SQLAuthority News – Meeting SQL Friends – SQLPASS 2011 Event Log

  - by pinaldave

  One of the biggest reason I go to SQLPASS is that my friends are going there too. There are so many friends with whom I often talk on Facebook and Twitter but I rarely get time to meet them as well talk with them. One thing I am usually sure that many fo them will be for sure attend SQLPASS. This is one event which every SQL Server Enthusiast should attend. Just like everybody I had pleasant time to meet many of my SQL friends. There were so many friends that I met and I did not click photo. There were so many friends who clicked photo in their camera and I do not have them. Here are 1% of the photos which I have. If you are not in the photo, it does not mean I have less respect to our friendship. Please post link to our photo together :) I was very fortunate that I was able to snap a quick photograph with Pinal Dave with Dr. David DeWitt. I stood outside of the hall waiting for Dr. to show up and when he was heading down from convention center I requested him if I can have one photo for my memory lane and very politely he agreed to have one. It indeed made my day! Pinal Dave with Dr. David DeWitt Every single time I met Steve, I make sure I have one photo for my memory. Steve is so kind every single time. If you know SQL and do not know Steve Jones, you do not know SQL (IMHO). Following is the photograph with Michael McLean. More details about this photo in future blog post! Pinal Dave, Michael McLean, and Rick Morelan Arnie always shares his wisdom with me. I still remember when I very first time visited USA, I was standing alone in corner and Arnie walked to me and introduced to every single person he know. Talking to Arnie is always pleasure and inspiring. Arnie Rowland and Pinal Dave I am now published author and have written two books so far. I am fortunate to have Rick Morelan as Co-author of both of my books. He is great guy and very easy to become friends with. I am very much impressed by him and his kindness during book co-authoring. Here is very first of our photograph together at SQLPASS. Rick Morelan and Pinal Dave Diego Nogare and I have been talking for long time on twitter and on various social media channels. I finally got chance to meet my friend from Brazil. It was excellent experience to meet a friend whom one wants to meet for long time and had never got chance earlier. Buck Woody – who does not know Buck. He is funny, kind and most important friends of every one. Buck is so kind that he does not hesitate to approach people even though he is famous and most known in community. Every time I meet him I learn something. He is always smiling and approachable. Pinal Dave and Buck Woddy Rushabh Mehta is current SQL PASS president and personal friend. He has always smiling face and tremendous love for SQL community. I often wonder where he gets all the time for all the time and efforts he puts in for community. I never miss a chance to meet and greet him. Even though he is renowned SQL Guru and extremely busy person – every single time I meet him he always asks me – “How is Nupur and Shaivi?” He even remembers my wife and daughters name. I am touched. Rushabh Mehta and Pinal Dave Nigel Sammy has extremely well sense of humor and passion from community. We have excellent synergy while we are together. The attached photo is taken while I was talking to him on Seattle Shoreline about SQL. Pinal Dave and Nigel Sammy Rick Morelan wanted my this trip to be memorable. I am vegetarian and I told him that I do not like Seafood. Well, to prove the point, he took me to fantastic Seafood restaurant in Seattle and treated me with mouth watering vegetarian dishes. I think when I go to Seattle next time, I am going to make him to take me again to the same place. Rick, Rushabh, Pinal and Paras Well, this is a short summary of few of the friends I met at Seattle. What is the life without friends, eh? Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL PASS, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, SQLAuthority News, T SQL, Technology

  Read the article

• Protecting offline IRM rights and the error "Unable to Connect to Offline database"

  - by Simon Thorpe

  One of the most common problems I get asked about Oracle IRM is in relation to the error message "Unable to Connect to Offline database". This error message is a result of how Oracle IRM is protecting the cached rights on the local machine and if that cache has become invalid in anyway, this error is thrown. Offline rights and security First we need to understand how Oracle IRM handles offline use. The way it is implemented is one of the main reasons why Oracle IRM is the leading document security solution and demonstrates our methodology to ensure that solutions address both security and usability and puts the balance of these two in your control. Each classification has a set of predefined roles that the manager of the classification can assign to users. Each role has an offline period which determines the amount of time a user can access content without having to communicate with the IRM server. By default for the context model, which is the classification system that ships out of the box with Oracle IRM, the offline period for each role is 3 days. This is easily changed however and can be as low as under an hour to as long as years. It is also possible to switch off the ability to access content offline which can be useful when content is very sensitive and requires a tight leash. So when a user is online, transparently in the background, the Oracle IRM Desktop communicates with the server and updates the users rights and offline periods. This transparent synchronization period is determined by the server and communicated to all IRM Desktops and allows for users rights to be kept up to date without their intervention. This allows us to support some very important scenarios which are key to a successful IRM solution. A user doesn't have to make any decision when going offline, they simply unplug their laptop and they already have their offline periods synchronized to the maximum values. Any solution that requires a user to make a decision at the point of going offline isn't going to work because people forget to do this and will therefore be unable to legitimately access their content offline. If your rights change to REMOVE your access to content, this also happens in the background. This is very useful when someone has an offline duration of a week and they happen to make a connection to the internet 3 days into that offline period, the Oracle IRM Desktop detects this online state and automatically updates all rights for the user. This means the business risk is reduced when setting long offline periods, because of the daily transparent sync, you can reflect changes as soon as the user is online. Of course, if they choose not to come online at all during that week offline period, you cannot effect change, but you take that risk in giving the 7 day offline period in the first place. If you are added to a NEW classification during the day, this will automatically be synchronized without the user even having to open a piece of content secured against that classification. This is very important, consider the scenario where a senior executive downloads all their email but doesn't open any of it. Disconnects the laptop and then gets on a plane. During the flight they attempt to open a document attached to a downloaded email which has been secured against an IRM classification the user was not even aware they had access to. Because their new role in this classification was automatically synchronized their experience is a good one and the document opens. More information on how the Oracle IRM classification model works can be found in this article by Martin Abrahams. So what about problems accessing the offline rights database? So onto the core issue... when these rights are cached to your machine they are stored in an encrypted database. The encryption of this offline database is keyed to the instance of the installation of the IRM Desktop and the Windows user account. Why? Well what you do not want to happen is for someone to get their rights for content and then copy these files across hundreds of other machines, therefore getting access to sensitive content across many environments. The IRM server has a setting which controls how many times you can cache these rights on unique machines. This is because people typically access IRM content on more than one computer. Their work desktop, a laptop and often a home computer. So Oracle IRM allows for the usability of caching rights on more than one computer whilst retaining strong security over this cache. So what happens if these files are corrupted in someway? That's when you will see the error, Unable to Connect to Offline database. The most common instance of seeing this is when you are using virtual machines and copy them from one computer to the next. The virtual machine software, VMWare Workstation for example, makes changes to the unique information of that virtual machine and as such invalidates the offline database. How do you solve the problem? Resolution is however simple. You just delete all of the offline database files on the machine and they will be recreated with working encryption when the Oracle IRM Desktop next starts. However this does mean that the IRM server will think you have your rights cached to more than one computer and you will need to rerequest your rights, even though you are only going to be accessing them on one. Because it still thinks the old cache is valid. So be aware, it is good practice to increase the server limit from the default of 1 to say 3 or 4. This is done using the Enterprise Manager instance of IRM. So to delete these offline files I have a simple .bat file you can use; Download DeleteOfflineDBs.bat Note that this uses pskillto stop the irmBackground.exe from running. This is part of the IRM Desktop and holds open a lock to the offline database. Either kill this from task manager or use pskillas part of the script.

  Read the article

• Developer Training – Employee Morals and Ethics – Part 2

  - by pinaldave

  Developer Training - Importance and Significance - Part 1 Developer Training – Employee Morals and Ethics – Part 2 Developer Training – Difficult Questions and Alternative Perspective - Part 3 Developer Training – Various Options for Developer Training – Part 4 Developer Training – A Conclusive Summary- Part 5 If you have been reading this series of posts about Developer Training, you can probably determine where my mind lies in the matter – firmly “pro.”  There are many reasons to think that training is an excellent idea for the company.  In the end, it may seem like the company gets all the benefits and the employee has just wasted a few hours in a dark, stuffy room.  However, don’t let yourself be fooled, this is not the case! Training, Company and YOU! Do not forget, that as an employee, you are your company’s best asset.  Training is meant to benefit the company, of course, but in the end, YOU, the employee, is the one who walks away with a lot of useful knowledge in your head.  This post will discuss what to do with that knowledge, how to acquire it, and who should pay for it. Eternal Question – Who Pays for Training? When the subject of training comes up, money is often the sticky issue.  Some companies will argue that because the employee is the one who benefits the most, he or she should pay for it.  Of course, whenever money is discuss, emotions tend to follow along, and being told you have to pay money for mandatory training often results in very unhappy employees – the opposite result of what the training was supposed to accomplish.  Therefore, many companies will pay for the training.  However, if your company is reluctant to pay for necessary training, or is hesitant to pay for a specific course that is extremely expensive, there is always the art of compromise.  The employee and the company can split the cost of the training – after all, both the company and the employee will be benefiting. [Click on following image to answer important question] Click to Enlarge  This kind of “hybrid” pay scheme can be split any way that is mutually beneficial.  There is the obvious 50/50 split, but for extremely expensive classes or conferences, this still might be prohibitively expensive for the employee.  If you are facing this situation, here are some example solutions you could suggest to your employer:  travel reimbursement, paid leave, payment for only the tuition.  There are even more complex solutions – the company could pay back the employee after the training and project has been completed. Training is not Vacation Once the classes have been settled on, and the question of payment has been answered, it is time to attend your class or travel to your conference!  The first rule is one that your mothers probably instilled in you as well – have a good attitude.  While you might be looking forward to your time off work, going to an interesting class, hopefully with some friends and coworkers, but do not mistake this time as a vacation.  It can be tempting to only have fun, but don’t forget to learn as well.  I call this “attending sincerely.”  Pay attention, have an open mind and good attitude, and don’t forget to take notes!  You might be surprised how many people will want to see what you learned when you go back. Report Back the Learning When you get back to work, those notes will come in handy.  Your supervisor and coworkers might want you to give a short presentation about what you learned.  Attending these classes can make you almost a celebrity.  Don’t be too nervous about these presentations, and don’t feel like they are meant to be a test of your dedication.  Many people will be genuinely curious – and maybe a little jealous that you go to go learn something new.  Be generous with your notes and be willing to pass your learning on to others through mini-training sessions of your own. [Click on following image to answer important question] Click to Enlarge Practice New Learning On top of helping to train others, don’t forget to put your new knowledge to use!  Your notes will come in handy for this, and you can even include your plans for the future in your presentation when you return.  This is a good way to demonstrate to your bosses that the money they paid (hopefully they paid!) is going to be put to good use. Feedback to Manager When you return, be sure to set aside a few minutes to talk about your training with your manager.  Be perfectly honest – your manager wants to know the good and the bad.  If you had a truly miserable time, do not lie and say it was the best experience – you and others may be forced to attend the same training over and over again!  Of course, you do not want to sound like a complainer, so make sure that your summary includes the good news as well.  Your manager may be able to help you understand more of what they wanted you to learn, too. Win-Win Situation In the end, remember that training is supposed to be a benefit to the employer as well as the employee.  Make sure that you share your information and that you give feedback about how you felt the sessions went as well as how you think this training can be implemented at the company immediately. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Developer Training, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Leaks on Wikis: "Corporations...You're Next!" Oracle Desktop Virtualization Can Help.

  - by adam.hawley

  Between all the press coverage on the unauthorized release of 251,287 diplomatic documents and on previous extensive releases of classified documents on the events in Iraq and Afghanistan, one could be forgiven for thinking massive leaks are really an issue for governments, but it is not: It is an issue for corporations as well. In fact, corporations are apparently set to be the next big target for things like Wikileaks. Just the threat of such a release against one corporation recently caused the price of their stock to drop 3% after the leak organization claimed to have 5GB of information from inside the company, with the implication that it might be damaging or embarrassing information. At the moment of this blog anyway, we don't know yet if that is true or how they got the information but how did the diplomatic cable leak happen? For the diplomatic cables, according to press reports, a private in the military, with some appropriate level of security clearance (that is, he apparently had the correct level of security clearance to be accessing the information...he reportedly didn't "hack" his way through anything to get to the documents which might have raised some red flags...), is accused of accessing the material and copying it onto a writeable CD labeled "Lady Gaga" and walking out the door with it. Upload and... Done. In the same article, the accused is quoted as saying "Information should be free. It belongs in the public domain." Now think about all the confidential information in your company or non-profit... from credit card information, to phone records, to customer or donor lists, to corporate strategy documents, product cost information, etc, etc.... And then think about that last quote above from what was a very junior level person in the organization...still feeling comfortable with your ability to control all your information? So what can you do to guard against these types of breaches where there is no outsider (or even insider) intrusion to detect per se, but rather someone with malicious intent is physically walking out the door with data that they are otherwise allowed to access in their daily work? A major first step it to make it physically, logistically much harder to walk away with the information. If the user with malicious intent has no way to copy to removable or moble media (USB sticks, thumb drives, CDs, DVDs, memory cards, or even laptop disk drives) then, as a practical matter it is much more difficult to physically move the information outside the firewall. But how can you control access tightly and reliably and still keep your hundreds or even thousands of users productive in their daily job? Oracle Desktop Virtualization products can help.Oracle's comprehensive suite of desktop virtualization and access products allow your applications and, most importantly, the related data, to stay in the (highly secured) data center while still allowing secure access from just about anywhere your users need to be to be productive.  Users can securely access all the data they need to do their job, whether from work, from home, or on the road and in the field, but fully configurable policies set up centrally by privileged administrators allow you to control whether, for instance, they are allowed to print documents or use USB devices or other removable media.  Centrally set policies can also control not only whether they can download to removable devices, but also whether they can upload information (see StuxNet for why that is important...)In fact, by using Sun Ray Client desktop hardware, which does not contain any disk drives, or removable media drives, even theft of the desktop device itself would not make you vulnerable to data loss, unlike a laptop that can be stolen with hundreds of gigabytes of information on its disk drive.  And for extreme security situations, Sun Ray Clients even come standard with the ability to use fibre optic ethernet networking to each client to prevent the possibility of unauthorized monitoring of network traffic.But even without Sun Ray Client hardware, users can leverage Oracle's Secure Global Desktop software or the Oracle Virtual Desktop Client to securely access server-resident applications, desktop sessions, or full desktop virtual machines without persisting any application data on the desktop or laptop being used to access the information.  And, again, even in this context, the Oracle products allow you to control what gets uploaded, downloaded, or printed for example.Another benefit of Oracle's Desktop Virtualization and access products is the ability to rapidly and easily shut off user access centrally through administrative polices if, for example, an employee changes roles or leaves the company and should no longer have access to the information.Oracle's Desktop Virtualization suite of products can help reduce operating expense and increase user productivity, and those are good reasons alone to consider their use.  But the dynamics of today's world dictate that security is one of the top reasons for implementing a virtual desktop architecture in enterprises.For more information on these products, view the webpages on www.oracle.com and the Oracle Technology Network website.

  Read the article

• Pre-filtering and shaping OData feeds using WCF Data Services and the Entity Framework - Part 2

  - by rajbk

  In the previous post, you saw how to create an OData feed and pre-filter the data. In this post, we will see how to shape the data. A sample project is attached at the bottom of this post. Pre-filtering and shaping OData feeds using WCF Data Services and the Entity Framework - Part 1 Shaping the feed The Product feed we created earlier returns too much information about our products. Let’s change this so that only the following properties are returned – ProductID, ProductName, QuantityPerUnit, UnitPrice, UnitsInStock. We also want to return only Products that are not discontinued.  Splitting the Entity To shape our data according to the requirements above, we are going to split our Product Entity into two and expose one through the feed. The exposed entity will contain only the properties listed above. We will use the other Entity in our Query Interceptor to pre-filter the data so that discontinued products are not returned. Go to the design surface for the Entity Model and make a copy of the Product entity. A “Product1” Entity gets created.   Rename Product1 to ProductDetail. Right click on the Product entity and select “Add Association” Make a one to one association between Product and ProductDetails.   Keep only the properties we wish to expose on the Product entity and delete all other properties on it (see diagram below). You delete a property on an Entity by right clicking on the property and selecting “delete”. Keep the ProductID on the ProductDetail. Delete any other property on the ProductDetail entity that is already present in the Product entity. Your design surface should look like below:    Mapping Entity to Database Tables Right click on “ProductDetail” and go to “Table Mapping”   Add a mapping to the “Products” table in the Mapping Details.   After mapping ProductDetail, you should see the following.   Add a referential constraint. Lets add a referential constraint which is similar to a referential integrity constraint in SQL. Double click on the Association between the Entities and add the constraint with “Principal” set to “Product”. Let us review what we did so far. We made a copy of the Product entity and called it ProductDetail We created a one to one association between these entities Excluding the ProductID, we made sure properties were not duplicated between these entities  We added a ProductDetail entity to Products table mapping (Entity to Database). We added a referential constraint between the entities. Lets build our project. We get the following error: ”'NortwindODataFeed.Product' does not contain a definition for 'Discontinued' and no extension method 'Discontinued' accepting a first argument of type 'NortwindODataFeed.Product' could be found …" The reason for this error is because our Product Entity no longer has a “Discontinued” property. We “moved” it to the ProductDetail entity since we want our Product Entity to contain only properties that will be exposed by our feed. Since we have a one to one association between the entities, we can easily rewrite our Query Interceptor like so: [QueryInterceptor("Products")] public Expression<Func<Product, bool>> OnReadProducts() { return o => o.ProductDetail.Discontinued == false; } Similarly, all “hidden” properties of the Product table are available to us internally (through the ProductDetail Entity) for any additional logic we wish to implement. Compile the project and view the feed. We see that the feed returns only the properties that were part of the requirement.   To see the data in JSON format, you have to create a request with the following request header Accept: application/json, text/javascript, */* (easy to do in jQuery) The result should look like this: { "d" : { "results": [ { "__metadata": { "uri": "http://localhost.:2576/DataService.svc/Products(1)", "type": "NorthwindModel.Product" }, "ProductID": 1, "ProductName": "Chai", "QuantityPerUnit": "10 boxes x 20 bags", "UnitPrice": "18.0000", "UnitsInStock": 39 }, { "__metadata": { "uri": "http://localhost.:2576/DataService.svc/Products(2)", "type": "NorthwindModel.Product" }, "ProductID": 2, "ProductName": "Chang", "QuantityPerUnit": "24 - 12 oz bottles", "UnitPrice": "19.0000", "UnitsInStock": 17 }, { ... ... If anyone has the $format operation working, please post a comment. It was not working for me at the time of writing this.  We have successfully pre-filtered our data to expose only products that have not been discontinued and shaped our data so that only certain properties of the Entity are exposed. Note that there are several other ways you could implement this like creating a QueryView, Stored Procedure or DefiningQuery. You have seen how easy it is to create an OData feed, shape the data and pre-filter it by hardly writing any code of your own. For more details on OData, Google it with your favorite search engine :-) Also check out the one of the most passionate persons I have ever met, Pablo Castro – the Architect of Aristoria WCF Data Services. Watch his MIX 2010 presentation titled “OData: There's a Feed for That” here. Download Sample Project for VS 2010 RTM NortwindODataFeed.zip

  Read the article

• Creating an ASP.NET report using Visual Studio 2010 - Part 2

  - by rajbk

  We continue building our report in this three part series. Creating an ASP.NET report using Visual Studio 2010 - Part 1 Creating an ASP.NET report using Visual Studio 2010 - Part 3 Creating the Client Report Definition file (RDLC) Add a folder called “RDLC”. This will hold our RDLC report.   Right click on the RDLC folder, select “Add new item..” and add an “RDLC” name of “Products”. We will use the “Report Wizard” to walk us through the steps of creating the RDLC.   In the next dialog, give the dataset a name called “ProductDataSet”. Change the data source to “NorthwindReports.DAL” and select “ProductRepository(GetProductsProjected)”. The fields that are returned from the method are shown on the right. Click next.   Drag and drop the ProductName, CategoryName, UnitPrice and Discontinued into the Values container. Note that you can create much more complex grouping using this UI. Click Next.   Most of the selections on this screen are grayed out because we did not choose a grouping in the previous screen. Click next. Choose a style for your report. Click next. The report graphic design surface is now visible. Right click on the report and add a page header and page footer. With the report design surface active, drag and drop a TextBox from the tool box to the page header. Drag one more textbox to the page header. We will use the text boxes to add some header text as shown in the next figure. You can change the font size and other properties of the textboxes using the formatting tool bar (marked in red). You can also resize the columns by moving your cursor in between columns and dragging. Adding Expressions Add two more text boxes to the page footer. We will use these to add the time the report was generated and page numbers. Right click on the first textbox in the page footer and select “Expression”. Add the following expression for the print date (note the = sign at the left of the expression in the dialog below) "© Northwind Traders " & Format(Now(),"MM/dd/yyyy hh:mm tt") Right click on the second text box and add the following for the page count.   Globals.PageNumber & " of " & Globals.TotalPages Formatting the page footer is complete.   We are now going to format the “Unit Price” column so it displays the number in currency format.  Right click on the [UnitPrice] column (not header) and select “Text Box Properties..” Under “Number”, select “Currency”. Hit OK. Adding a chart With the design surface active, go to the toolbox and drag and drop a chart control. You will need to move the product list table down first to make space for the chart contorl. The document can also be resized by dragging on the corner or at the page header/footer separator. In the next dialog, pick the first chart type. This can be changed later if needed. Click OK. The chart gets added to the design surface.   Click on the blue bars in the chart (not legend). This will bring up drop locations for dropping the fields. Drag and drop the UnitPrice and CategoryName into the top (y axis) and bottom (x axis) as shown below. This will give us the total unit prices for a given category. That is the best I could come up with as far as what report to render, sorry :-) Delete the legend area to get more screen estate. Resize the chart to your liking. Change the header, x axis and y axis text by double clicking on those areas. We made it this far. Let’s impress the client by adding a gradient to the bar graph :-) Right click on the blue bar and select “Series properties”. Under “Fill”, add a color and secondary color and select the Gradient style. We are done designing our report. In the next section you will see how to add the report to the report viewer control, bind to the data and make it refresh when the filter criteria are changed.   Creating an ASP.NET report using Visual Studio 2010 - Part 3

  Read the article

• Windows Phone 7 development: first impressions

  - by DigiMortal

  After hard week in work I got some free time to play with Windows Phone 7 CTP developer tools. Although my first test application is still unfinished I think it is good moment to share my first experiences to you. In this posting I will give you quick overview of Windows Phone 7 developer tools from developer perspective. If you are familiar with Visual Studio 2010 then you will feel comfortable because Windows Phone 7 CTP developer tools base on Visual Studio 2010 Express. Project templates There are five project templates available. Three of them are based on Silverlight and two on XNA Game Studio: Windows Phone Application (Silverlight) Windows Phone List Application (Silverlight) Windows Phone Class Library (Silverlight) Windows Phone Game (XNA Game Studio) Windows Phone Game Library (XNA Game Studio) Currently I am writing to test applications. One of them is based on Windows Phone Application and the other on Windows Phone List Application project template. After creating these projects you see the following views in Visual Studio. Windows Phone Application. Click on image to enlarge. Windows Phone List Application. Click on image to enlarge.  I suggest you to use some of these templates to get started more easily. Windows Phone 7 emulator You can run your Windows Phone 7 applications on Windows Phone 7 emulator that comes with developer tools CTP. If you run your application then emulator is started automatically and you can try out how your application works in phone-like emulator. You can see screenshot of emulator on right. Currently there is opened Windows Phone List Application as it is created by default. Click on image to enlarge it. Emulator is a little bit slow and uncomfortable but it works pretty well. This far I have caused only couple of crashes during my experiments. In these cases emulator works but Visual Studio gets stuck because it cannot communicate with emulator. One important note. Emulator is based on virtual machine although you can see only phone screen and options toolbar. If you want to run emulator you must close all virtual machines running on your machine and run Visual Studio 2010 as administrator. Once you run emulator you can keep it open because you can stop your application in Visual Studio, modify, compile and re-deploy it without restarting emulator. Designing user interfaces You can design user interface of your application in Visual Studio. When you open XAML-files it is displayed in window with two panels. Left panel shows you device screen and works as visual design environment while right panel shows you XAML mark-up and let’s you modify XML if you need it. As it is one of my very first Silverlight applications I felt more comfortable with XAML editor because property names in property boxes of visual designer confused me a little bit. Designer panel is not very good because it is visually hard to follow. It has black background that makes dark borders of controls very hard to see. If you have monitor with very high contrast then it is may be not a real problem. I have usual monitor and I have problem. :) Putting controls on design surface, dragging and resizing them is also pretty painful. Some controls are drawn correctly but for some controls you have to set width and height in XML so they can be resized. After some practicing it is not so annoying anymore. On the right you can see toolbox with some controllers. This is all you get out of the box. But it is sufficient to get started. After getting some experiences you can create your own controls or use existing ones from other vendors or developers. If it is your first time to do stuff with Silverlight then keep Google open – you need it hard. After getting over the first shock you get the point very quickly and start developing at normal speed. :) Writing source code Writing source code is the most familiar part of this action. Good old Visual Studio code editor with all nice features it has. But here you get also some surprises: The anatomy of Silverlight controls is a little bit different than the one of user controls in web and forms projects. Windows Phone 7 doesn’t run on full version of Windows (I bet it is some version of Windows CE or something like this) then there is less system classes you can use. Some familiar classes have less methods that in full version of .NET Framework and in these cases you have to write all the code by yourself or find libraries or source code from somewhere. These problems are really not so much problems than limitations and you get easily over them. Conclusion Windows Phone 7 CTP developer tools help you do a lot of things on Windows Phone 7. Although I expected better performance from tools I think that current performance is not a problem. This far my first test project is going very well and Google has answer for almost every question. Windows Phone 7 is mobile device and therefore it has less hardware resources than desktop computers. This is why toolset is so limited. The more you need memory the more slower is device and as you may guess it needs the more battery. If you are writing apps for mobile devices then make your best to get your application use as few resources as possible and act as fast as possible.

  Read the article

• SnagIt Live Writer Plug-in Updated

  - by Rick Strahl

  Ah, I love SnagIt from TechSmith and I use the heck out of it almost every day. So no surprise that I've decided some time ago to integrate SnagIt into a few applications that require screen shots extensively. It's been a while since I've posted an update to my small SnagIt Windows Live Writer plug-in. There have been a few nagging issues that have crept up with recent changes in the way SnagIt handles captures in recent versions and they have been addressed in this update of SnagIt. Personally I love SnagIt and use it extensively mostly for blogging, but also for writing documentation and articles etc. While there are many other (and also free) tools out there to do basic screen captures, SnagIt continues to be the most convenient tool for me with its nice built in capture and effects editor that makes creating professional looking captures childishly simple. And maybe even more importantly: SnagIt has a COM interface that can be automated and  makes it super easy to embed into other applications. I've built plugins for SnagIt as well as for one of my company's own tools, Html Help Builder. If you use the Windows Live Writer offline WebLog Editor to write blog posts and have a copy of SnagIt it's probably worth your while to check this out if you haven't already. In case you haven't, this plugin integrates SnagIt with Live Writer so you can easily capture and edit content and embed it into a post. Captures are shown in the SnagIt Preview editor where you can edit the image and apply image markup or effects, before selecting Finish (or Cancel). The final image can then be pasted directly into your Live Writer post. When installed the SnagIt plug-in shows up on the PlugIn list or in the Plug-Ins toolbar shortcut: Once you select the Plug in you get the capture window that allows you to customize the capture process which includes most of the useful SnagIt capture options: Once you're done capturing the image shows up in the SnagIt Image Editor and you can crop, mark up and apply effects. When done you click the Finish button and the image is embedded right into your blog post. Easy - how do you think the images in this blog entry got in here? The beauty of SnagIt is that it's all easily integrated - Capturing, editing and embedding, it only takes a few seconds to do it all especially if you save image effect presets in SnagIt. What's updated The main issue addressed in this update has to do with the plug-in updates the Live Writer window. When a capture starts Live Writer gets minimized to get out of the way to let you pick your capture source. When the capture is complete and the image has been embedded Live Writer is activated once again. Recent versions of SnagIt however had changed the Window positioning of SnagIt so that Live Writer ended up popping up back behind the SnagIt window which was pretty annoying. This update pushes Live Writer back to the top of the window stack using some delaying tactics in the code. There have also been a few small changes to the way the code interacts with the COM object which is more reliable if a capture fails or SnagIt blows up or is locked because it's already in a capture outside of the automation interface. Source Code SnagIt Automation is something I actually use a lot. As mentioned I've integrated this automation into Live Writer as well as my documentation tool Html Help Builder, which I use just about daily. The SnagIt integration has a similar interface in that application and provides similar functionality. It's quite useful to integrate SnagIt into other applications. Because it's quite useful to embed SnagIt into other apps there's source code that you can download and embed into your own applications. The code includes both the dialog class that is automated from Live Writer, as well as the basic capture component that captures images to a disk file. Resources Download the SnagIt Capture Plug-in Installer An MSI installer that you can run that will install the plug-in into Live Writer's PlugIns directory. Source Code to the SnagIt Capture Plug-in Contains the plug-in assembly, as well as the source code to the plug-in and the setup project.© Rick Strahl, West Wind Technologies, 2005-2011Posted in Live Writer  WebLog   Tweet (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• I Didn&rsquo;t Get You Anything&hellip;

  - by Bob Rhubart

  Nearly every day this blog features a  list posts and articles written by members of the OTN architect community. But with Christmas just days away, I thought a break in that routine was in order. After all, if the holidays aren’t excuse enough for an off-topic post, then the terrorists have won. Rather than buy gifts for everyone -- which, given the readership of this blog and my budget could amount to a cash outlay of upwards of $15.00 – I thought I’d share a bit of holiday humor. I wrote the following essay back in the mid-90s, for a “print” publication that used “paper” as a content delivery system.  That was then. I’m older now, my kids are older, but my feelings toward the holidays haven’t changed… It’s New, It’s Improved, It’s Christmas! The holidays are a time of rituals. Some of these, like the shopping, the music, the decorations, and the food, are comforting in their predictability. Other rituals, like the shopping, the  music, the decorations, and the food, can leave you curled into the fetal position in some dark corner, whimpering. How you react to these various rituals depends a lot on your general disposition and credit card balance. I, for one, love Christmas. But there is one Christmas ritual that really tangles my tinsel: the seasonal editorializing about how our modern celebration of the holidays pales in comparison to that of Christmas past. It's not that the old notions of how to celebrate the holidays aren't all cozy and romantic--you can't watch marathon broadcasts of "It's A Wonderful White Christmas Carol On Thirty-Fourth Street Story" without a nostalgic teardrop or two falling onto your plate of Christmas nachos. It's just that the loudest cheerleaders for "old-fashioned" holiday celebrations overlook the fact that way-back-when those people didn't have the option of doing it any other way. Dashing through the snow in a one-horse open sleigh? No thanks. When Christmas morning rolls around, I'm going to be mighty grateful that the family is going to hop into a nice warm Toyota for the ride over to grandma's place. I figure a horse-drawn sleigh is big fun for maybe fifteen minutes. After that you’re going to want Old Dobbin to haul ass back to someplace warm where the egg nog is spiked and the family can gather in the flickering glow of a giant TV and contemplate the true meaning of football. Chestnuts roasting on an open fire? Sorry, no fireplace. We've got a furnace for heat, and stuffing nuts in there voids the warranty. Any of the roasting we do these days is in the microwave, and I'm pretty sure that if you put chestnuts in the microwave they would become little yuletide hand grenades. Although, if you've got a snoot full of Yule grog, watching chestnuts explode in your microwave might be a real holiday hoot. Some people may see microwave ovens as a symptom of creeping non-traditional holiday-ism. But I'll bet you that if there were microwave ovens around in Charles Dickens' day, the Cratchits wouldn't have had to entertain an uncharacteristically giddy Scrooge for six or seven hours while the goose cooked. Holiday entertaining is, in fact, the one area that even the most severe critic of modern practices would have to admit has not changed since Tim was Tiny. A good holiday celebration, then as now, involves lots of food, free-flowing drink, and a gathering of friends and family, some of whom you are about as happy to see as a subpoena. Just as the Cratchit's Christmas was spent with a man who, for all they knew, had suffered some kind of head trauma, so the modern holiday gathering includes relatives or acquaintances who, because they watch too many talk shows, and/or have poor personal hygiene, and/or fail to maintain scheduled medication, you would normally avoid like a plate of frosted botulism. But in the season of good will towards men, you smile warmly at the mystery uncle wandering around half-crocked with a clump of mistletoe dangling from the bill of his N.R.A. cap. Dickens' story wouldn't have become the holiday classic it has if, having spotted on their doorstep an insanely grinning, raw poultry-bearing, fresh-off-a-rough-night Scrooge, the Cratchits had pulled their shades and pretended not to be home. Which is probably what I would have done. Instead, knowing full well his reputation as a career grouch, they welcomed him into their home, and we have a touching story that teaches a valuable lesson about how the Christmas spirit can get the boss to pump up the payroll. Despite what the critics might say, our modern Christmas isn't all that different from those of long ago. Sure, the technology has changed, but that just means a bigger, brighter, louder Christmas, with lasers and holograms and stuff. It's our modern celebration of a season that even the least spiritual among us recognizes as a time of hope that the nutcases of the world will wake up and realize that peace on earth is a win/win proposition for everybody. If Christmas has changed, it's for the better. We should continue making Christmas bigger and louder and shinier until everybody gets it.  *** Happy Holidays, everyone!   del.icio.us Tags: holiday,humor Technorati Tags: holiday,humor

  Read the article

• A Rose by Any Other Name..

  - by Geoff N. Hiten

  It is always a good start when you can steal a title line from one of the best writers in the English language.  Let’s hope I can make the rest of this post live up to the opening.  One recurring problem with SQL server is moving databases to new servers.  Client applications use a variety of ways to resolve SQL Server names, some of which are not changed easily <cough SharePoint /cough>.  If you happen to be using default instances on both the source and target SQL Server, then the solution is pretty simple.  You create (or bug the network admin until she creates) two DNS “A” records. One points the old name to the new IP address.  The other creates a new alias for the old server, since the original system name is now redirected.  Note this will redirect ALL traffic from the old server to the new server, including RDP and file share connection attempts.    Figure 1 – Microsoft DNS MMC Snap-In   Figure 2 – DNS New Host Dialog Box Both records are necessary so you can still access the old server via an alternate name. Server Role IP Address Name Alias Source 10.97.230.60 SQL01 SQL01_Old Target 10.97.230.80 SQL02 SQL01 Table 1 – Alias List If you or somebody set up connections via IP address, you deserve to have to go to each app and fix it by hand.  That is the only way to fix that particular foul-up. If have to deal with Named Instances either as a source or a target, then it gets more complicated.  The standard fix is to use the SQL Server Configuration Manager (or one of its earlier incarnations) to create a SQL client alias to redirect the connection.  This can be a pain installing and configuring the app on multiple client servers.  The good news is that SQL Server Configuration Manager AND all of its earlier versions simply write a few registry keys.  Extracting the keys into a .reg file makes centralized automated deployment a snap. If the client is a 32-bit system, you have to extract the native key.  If it is a 64-bit, you have to extract the native key and the WoW (32 bit on 64 bit host) key. First, pick a development system to create the actual registry key.  If you do this repeatedly, you can simply edit an existing registry file.  Create the entry using the SQL Configuration Manager.  You must use a 64-bit system to create the WoW key.  The following example redirects from a named instance “SQL01\SQLUtiluty” to a default instance on “SQL02”.   Figure 3 – SQL Server Configuration Manager - Native Figure 3 shows the native key listing. Figure 4 – SQL Server Configuration Manager – WoW If you think you don’t need the WoW key because your app is 64 it, think again.  SQL Server Management Server is a 32-bit app, as are most SQL test utilities.  Always create both keys for 64-bit target systems. Now that the keys exist, we can extract them into a .reg file. Fire up REGEDIT and browse to the following location:  HKLM\Software\Microsoft\MSSQLServer\Client\ConnectTo.  You can also search the registry for the string value of one of the server names (old or new). Right click on the “ConnectTo” label and choose “Export”.  Save with an appropriate name and location.  The resulting file should look something like this: Figure 5 – SQL01_Alias.reg Repeat the process with the location: HKLM\Software\Wow6432Node\Microsoft\MSSQLServer\Client\ConnectTo Note that if you have multiple alias entries, ALL of the entries will be exported.  In that case, you can edit the file and remove the extra aliases. You can edit the files together into a single file.  Just leave a blank line between new keys like this: Figure 6 – SQL01_Alias_All.reg Of course if you have an automatic way to deploy, it makes sense to have an automatic way to Un-deploy.  To delete a registry key, simply edit the .reg file and replace the target with a “-“ sign like so. Figure 7 – SQL01_Alias_UNDO.reg Now we have the ability to move any database to any server without having to install or change any applications on any client server.  The whole process should be transparent to the applications, which makes planning and coordinating database moves a far simpler task.

  Read the article

• Clean up after Visual Studio

  - by psheriff

  As programmer’s we know that if we create a temporary file during the running of our application we need to make sure it is removed when the application or process is complete. We do this, but why can’t Microsoft do it? Visual Studio leaves tons of temporary files all over your hard drive. This is why, over time, your computer loses hard disk space. This blog post will show you some of the most common places where these files are left and which ones you can safely delete..NET Left OversVisual Studio is a great development environment for creating applications quickly. However, it will leave a lot of miscellaneous files all over your hard drive. There are a few locations on your hard drive that you should be checking to see if there are left-over folders or files that you can delete. I have attempted to gather as much data as I can about the various versions of .NET and operating systems. Of course, your mileage may vary on the folders and files I list here. In fact, this problem is so prevalent that PDSA has created a Computer Cleaner specifically for the Visual Studio developer.  Instructions for downloading our PDSA Developer Utilities (of which Computer Cleaner is one) are at the end of this blog entry.Each version of Visual Studio will create “temporary” files in different folders. The problem is that the files created are not always “temporary”. Most of the time these files do not get cleaned up like they should. Let’s look at some of the folders that you should periodically review and delete files within these folders.Temporary ASP.NET FilesAs you create and run ASP.NET applications from Visual Studio temporary files are placed into the <sysdrive>:\Windows\Microsoft.NET\Framework[64]\<vernum>\Temporary ASP.NET Files folder. The folders and files under this folder can be removed with no harm to your development computer. Do not remove the "Temporary ASP.NET Files" folder itself, just the folders underneath this folder. If you use IIS for ASP.NET development, you may need to run the iisreset.exe utility from the command prompt prior to deleting any files/folder under this folder. IIS will sometimes keep files in use in this folder and iisreset will release the locks so the files/folders can be deleted.Website CacheThis folder is similar to the ASP.NET Temporary Files folder in that it contains files from ASP.NET applications run from Visual Studio. This folder is located in each users local settings folder. The location will be a little different on each operating system. For example on Windows Vista/Windows 7, the folder is located at <sysdrive>:\Users\<UserName>\AppData\Local\Microsoft\WebsiteCache. If you are running Windows XP this folder is located at <sysdrive>:\ Documents and Settings\<UserName>\Local Settings\Application Data\Microsoft\WebsiteCache. Check these locations periodically and delete all files and folders under this directory.Visual Studio BackupThis backup folder is used by Visual Studio to store temporary files while you develop in Visual Studio. This folder never gets cleaned out, so you should periodically delete all files and folders under this directory. On Windows XP, this folder is located at <sysdrive>:\Documents and Settings\<UserName>\My Documents\Visual Studio 200[5|8]\Backup Files. On Windows Vista/Windows 7 this folder is located at <sysdrive>:\Users\<UserName>\Documents\Visual Studio 200[5|8]\.Assembly CacheNo, this is not the global assembly cache (GAC). It appears that this cache is only created when doing WPF or Silverlight development with Visual Studio 2008 or Visual Studio 2010. This folder is located in <sysdrive>:\ Users\<UserName>\AppData\Local\assembly\dl3 on Windows Vista/Windows 7. On Windows XP this folder is located at <sysdrive>:\ Documents and Settings\<UserName>\Local Settings\Application Data\assembly. If you have not done any WPF or Silverlight development, you may not find this particular folder on your machine.Project AssembliesThis is yet another folder where Visual Studio stores temporary files. You will find a folder for each project you have opened and worked on. This folder is located at <sysdrive>:\Documents and Settings\<UserName>Local Settings\Application Data\Microsoft\Visual Studio\[8|9].0\ProjectAssemblies on Windows XP. On Microsoft Vista/Windows 7 you will find this folder at <sysdrive>:\Users\<UserName>\AppData\Local\Microsoft\Visual Studio\[8|9].0\ProjectAssemblies.Remember not all of these folders will appear on your particular machine. Which ones do show up will depend on what version of Visual Studio you are using, whether or not you are doing desktop or web development, and the operating system you are using.SummaryTaking the time to periodically clean up after Visual Studio will aid in keeping your computer running quickly and increase the space on your hard drive. Another place to make sure you are cleaning up is your TEMP folder. Check your OS settings for the location of your particular TEMP folder and be sure to delete any files in here that are not in use. I routinely clean up the files and folders described in this blog post and I find that I actually eliminate errors in Visual Studio and I increase my hard disk space.NEW! PDSA has just published a “pre-release” of our PDSA Developer Utilities at http://www.pdsa.com/DeveloperUtilities that contains a Computer Cleaner utility which will clean up the above-mentioned folders, as well as a lot of other miscellaneous folders that get Visual Studio build-up. You can download a free trial at http://www.pdsa.com/DeveloperUtilities. If you wish to purchase our utilities through the month of November, 2011 you can use the RSVP code: DUNOV11 to get them for only $39. This is $40 off the regular price.NOTE: You can download this article and many samples like the one shown in this blog entry at my website. http://www.pdsa.com/downloads. Select “Tips and Tricks”, then “Developer Machine Clean Up” from the drop down list.Good Luck with your Coding,Paul Sheriff** SPECIAL OFFER FOR MY BLOG READERS **We frequently offer a FREE gift for readers of my blog. Visit http://www.pdsa.com/Event/Blog for your FREE gift!

  Read the article

• Juniper Strategy, LLC is hiring SharePoint Developers&hellip;

  - by Mark Rackley

  Isn’t everybody these days? It seems as though there are definitely more jobs than qualified devs these days, but yes, we are looking for a few good devs to help round out our burgeoning SharePoint team. Juniper Strategy is located in the DC area, however we will consider remote devs for the right fit. This is your chance to get in on the ground floor of a bright company that truly “gets it” when it comes to SharePoint, Project Management, and Information Assurance. We need like-minded people who “get it”, enjoy it, and who are looking for more than just a job. We have government and commercial opportunities as well as our own internal product that has a bright future of its own. Our immediate needs are for SharePoint .NET developers, but feel free to submit your resume for us to keep on file as it looks as though we’ll need several people in the coming months. Please email us your resume and salary requirements to [email protected] Below are our official job postings. Thanks for stopping by, we look forward to  hearing from you. Senior SharePoint .NET Developer Senior developer will focus on design and coding of custom, end-to-end business process solutions within the SharePoint framework. Senior developer with the ability to serve as a senior developer/mentor and manage day-to-day development tasks. Work with business consultants and clients to gather requirements to prepare business functional specifications. Analyze and recommend technical/development alternative paths based on business functional specifications. For selected development path, prepare technical specification and build the solution. Assist project manager with defining development task schedule and level-of-effort. Lead technical solution deployment. Job Requirements Minimum of 7 years experience in agile development, with at least 3 years of SharePoint-related development experience (SPS, SharePoint 2007/2010, WSS2-4). Thorough understanding of and demonstrated experience in development under the SharePoint Object Model, with focus on the WSS 3.0 foundation (MOSS 2007 Standard/Enterprise, Project Server 2007). Experience with using multiple data sources/repositories for database CRUD activities, including relational databases, SAP, Oracle e-Business. Experience with designing and deploying performance-based solutions in SharePoint for business processes that involve a very large number of records. Experience designing dynamic dashboards and mashups with data from multiple sources (internal to SharePoint as well as from external sources). Experience designing custom forms to facilitate user data entry, both with and without leveraging Forms Services. Experience building custom web part solutions. Experience with designing custom solutions for processing underlying business logic requirements including, but not limited to, SQL stored procedures, C#/ASP.Net workflows/event handlers (including timer jobs) to support multi-tiered decision trees and associated computations. Ability to create complex solution packages for deployment (e.g., feature-stapled site definitions). Must have impeccable communication skills, both written and verbal. Seeking a "tinkerer"; proactive with a thirst for knowledge (and a sense of humor). A US Citizen is required, and need to be able to pass NAC/E-Verify. An active Secret clearance is preferred. Applicants must pass a skills assessment test. MCP/MCTS or comparable certification preferred. Salary & Travel Negotiable SharePoint Project Lead Define project task schedule, work breakdown structure and level-of-effort. Serve as principal liaison to the customer to manage deliverables and expectations. Day-to-day project and team management, including preparation and maintenance of project plans, budgets, and status reports. Prepare technical briefings and presentation decks, provide briefs to C-level stakeholders. Work with business consultants and clients to gather requirements to prepare business functional specifications. Analyze and recommend technical/development alternative paths based on business functional specifications. The SharePoint Project Lead will be working with SharePoint architects and system owners to perform requirements/gap analysis and develop the underlying functional specifications. Once we have functional specifications as close to "final" as possible, the Project Lead will be responsible for preparation of the associated technical specification/development blueprint, along with assistance in preparing IV&V/test plan materials with support from other team members. This person will also be responsible for day-to-day management of "developers", but is also expected to engage in development directly as needed.  Job Requirements Minimum 8 years of technology project management across the software development life-cycle, with a minimum of 3 years of project management relating specifically to SharePoint (SPS 2003, SharePoint2007/2010) and/or Project Server. Thorough understanding of and demonstrated experience in development under the SharePoint Object Model, with focus on the WSS 3.0 foundation (MOSS 2007 Standard/Enterprise, Project Server 2007). Ability to interact and collaborate effectively with team members and stakeholders of different skill sets, personalities and needs. General "development" skill set required is a fundamental understanding of MOSS 2007 Enterprise, SP1/SP2, from the top-level of skinning to the core of the SharePoint object model. Impeccable communication skills, both written and verbal, and a sense of humor are required. The projects will require being at a client site at least 50% of the time in Washington DC (NW DC) and Maryland (near Suitland). A US Citizen is required, and need to be able to pass NAC/E-Verify. An active Secret clearance is preferred. PMP certification, PgMP preferred. Salary & Travel Negotiable

  Read the article

• AWS: setting up auto-scale for EC2 instances

  - by Elton Stoneman

  Originally posted on: http://geekswithblogs.net/EltonStoneman/archive/2013/10/16/aws-setting-up-auto-scale-for-ec2-instances.aspxWith Amazon Web Services, there’s no direct equivalent to Azure Worker Roles – no Elastic Beanstalk-style application for .NET background workers. But you can get the auto-scale part by configuring an auto-scaling group for your EC2 instance. This is a step-by-step guide, that shows you how to create the auto-scaling configuration, which for EC2 you need to do with the command line, and then link your scaling policies to CloudWatch alarms in the Web console. I’m using queue size as my metric for CloudWatch,  which is a good fit if your background workers are pulling messages from a queue and processing them.  If the queue is getting too big, the “high” alarm will fire and spin up a new instance to share the workload. If the queue is draining down, the “low” alarm will fire and shut down one of the instances. To start with, you need to manually set up your app in an EC2 VM, for a background worker that would mean hosting your code in a Windows Service (I always use Topshelf). If you’re dual-running Azure and AWS, then you can isolate your logic in one library, with a generic entry point that has Start() and Stop()  functions, so your Worker Role and Windows Service are essentially using the same code. When you have your instance set up with the Windows Service running automatically, and you’ve tested it starts up and works properly from a reboot, shut the machine down and take an image of the VM, using Create Image (EBS AMI) from the Web Console: When that completes, you’ll have your own AMI which you can use to spin up new instances, and you’re ready to create your auto-scaling group. You need to dip into the command-line tools for this, so follow this guide to set up the AWS autoscale command line tool. Now we’re ready to go. 1. Create a launch configuration This launch configuration tells AWS what to do when a new instance needs to be spun up. You create it with the as-create-launch-config command, which looks like this: as-create-launch-config sc-xyz-launcher # name of the launch config --image-id ami-7b9e9f12 # id of the AMI you extracted from your VM --region eu-west-1 # which region the new instance gets created in --instance-type t1.micro # size of the instance to create --group quicklaunch-1 #security group for the new instance 2. Create an auto-scaling group The auto-scaling group links to the launch config, and defines the overall configuration of the collection of instances: as-create-auto-scaling-group sc-xyz-asg # auto-scaling group name --region eu-west-1 # region to create in --launch-configuration sc-xyz-launcher # name of the launch config to invoke for new instances --min-size 1 # minimum number of nodes in the group --max-size 5 # maximum number of nodes in the group --default-cooldown 300 # period to wait (in seconds) after each scaling event, before checking if another scaling event is required --availability-zones eu-west-1a eu-west-1b eu-west-1c # which availability zones you want your instances to be allocated in – multiple entries means EC@ will use any of them 3. Create a scale-up policy The policy dictates what will happen in response to a scaling event being triggered from a “high” alarm being breached. It links to the auto-scaling group; this sample results in one additional node being spun up: as-put-scaling-policy scale-up-policy # policy name -g sc-psod-woker-asg # auto-scaling group the policy works with --adjustment 1 # size of the adjustment --region eu-west-1 # region --type ChangeInCapacity # type of adjustment, this specifies a fixed number of nodes, but you can use PercentChangeInCapacity to make an adjustment relative to the current number of nodes, e.g. increasing by 50% 4. Create a scale-down policy The policy dictates what will happen in response to a scaling event being triggered from a “low” alarm being breached. It links to the auto-scaling group; this sample results in one node from the group being taken offline: as-put-scaling-policy scale-down-policy -g sc-psod-woker-asg "--adjustment=-1" # in Windows, use double-quotes to surround a negative adjustment value –-type ChangeInCapacity --region eu-west-1 5. Create a “high” CloudWatch alarm We’re done with the command line now. In the Web Console, open up the CloudWatch view and create a new alarm. This alarm will monitor your metrics and invoke the scale-up policy from your auto-scaling group, when the group is working too hard. Configure your metric – this example will fire the alarm if there are more than 10 messages in my queue for over a minute: Then link the alarm to the scale-up policy in your group: 6. Create a “low” CloudWatch alarm The opposite of step 4, this alarm will trigger when the instances in your group don’t have enough work to do (e.g fewer than 2 messages in the queue for 1 minute), and will invoke the scale-down policy. And that’s it. You don’t need your original VM as the auto-scale group has a minimum number of nodes connected. You can test out the scaling by flexing your CloudWatch metric – in this example, filling up a queue from a  stub publisher – and watching AWS create new nodes as required, then stopping the publisher and watch AWS kill off the spare nodes.

  Read the article

• Big Data – What is Big Data – 3 Vs of Big Data – Volume, Velocity and Variety – Day 2 of 21

  - by Pinal Dave

  Data is forever. Think about it – it is indeed true. Are you using any application as it is which was built 10 years ago? Are you using any piece of hardware which was built 10 years ago? The answer is most certainly No. However, if I ask you – are you using any data which were captured 50 years ago, the answer is most certainly Yes. For example, look at the history of our nation. I am from India and we have documented history which goes back as over 1000s of year. Well, just look at our birthday data – atleast we are using it till today. Data never gets old and it is going to stay there forever.  Application which interprets and analysis data got changed but the data remained in its purest format in most cases. As organizations have grown the data associated with them also grew exponentially and today there are lots of complexity to their data. Most of the big organizations have data in multiple applications and in different formats. The data is also spread out so much that it is hard to categorize with a single algorithm or logic. The mobile revolution which we are experimenting right now has completely changed how we capture the data and build intelligent systems.  Big organizations are indeed facing challenges to keep all the data on a platform which give them a  single consistent view of their data. This unique challenge to make sense of all the data coming in from different sources and deriving the useful actionable information out of is the revolution Big Data world is facing. Defining Big Data The 3Vs that define Big Data are Variety, Velocity and Volume. Volume We currently see the exponential growth in the data storage as the data is now more than text data. We can find data in the format of videos, musics and large images on our social media channels. It is very common to have Terabytes and Petabytes of the storage system for enterprises. As the database grows the applications and architecture built to support the data needs to be reevaluated quite often. Sometimes the same data is re-evaluated with multiple angles and even though the original data is the same the new found intelligence creates explosion of the data. The big volume indeed represents Big Data. Velocity The data growth and social media explosion have changed how we look at the data. There was a time when we used to believe that data of yesterday is recent. The matter of the fact newspapers is still following that logic. However, news channels and radios have changed how fast we receive the news. Today, people reply on social media to update them with the latest happening. On social media sometimes a few seconds old messages (a tweet, status updates etc.) is not something interests users. They often discard old messages and pay attention to recent updates. The data movement is now almost real time and the update window has reduced to fractions of the seconds. This high velocity data represent Big Data. Variety Data can be stored in multiple format. For example database, excel, csv, access or for the matter of the fact, it can be stored in a simple text file. Sometimes the data is not even in the traditional format as we assume, it may be in the form of video, SMS, pdf or something we might have not thought about it. It is the need of the organization to arrange it and make it meaningful. It will be easy to do so if we have data in the same format, however it is not the case most of the time. The real world have data in many different formats and that is the challenge we need to overcome with the Big Data. This variety of the data represent  represent Big Data. Big Data in Simple Words Big Data is not just about lots of data, it is actually a concept providing an opportunity to find new insight into your existing data as well guidelines to capture and analysis your future data. It makes any business more agile and robust so it can adapt and overcome business challenges. Tomorrow In tomorrow’s blog post we will try to answer discuss Evolution of Big Data. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

  Read the article

• Messaging Systems – Handshaking, Reconciliation and Tracking for Data Transparency

  - by Ahsan Alam

  As many corporations build business partnerships with other organizations, the need to share information becomes necessary. Large amount of data sharing using snail mail, email and/or fax are quickly becoming a thing of the past. More and more organizations are relying heavily on Ftp and/or Web Service to exchange data. Corporations apply wide range of technologies and techniques based on available resources and data transfer needs. Sometimes, it involves simple home-grown applications. Other times, large investments are made on products like BizTalk, TIBCO etc. Complexity of information management also varies significantly from one organizations to another. Some may deal with handful of simple steps to process and manage shared data; whereas others may rely on fairly complex processes with heavy interaction with internal and external systems in order to serve the business needs. It is not surprising that many of these systems end up becoming black boxes over a period of time. Consequently, people and business start to rely more and more on developers and support personnel just to extract simple information adding to the loss of productivity. One of the most important factor in any business is transparency to data irrespective of technology preferences and the complexity of business processes. Not knowing the state of data could become very costly to the business. Being involved in messaging systems for some time now, I have heard the same type of questions over and over again. Did we transmit messages successfully? Did we get responses back? What is the expected turn-around-time? Did the system experience any errors? When one company transmits data to one or more company, it may invoke a set of processes that could complete in matter of seconds, or it could days. As data travels from one organizations to another, the uncertainty grows, and the longer it takes to track uncertain state of the data the costlier it gets for the business, So, in every business scenario, it's extremely important to be aware of the state of the data.   Architects of messaging systems can take several steps to aid with data transparency. Some forms of data handshaking and reconciliation mechanism as well as extensive data tracking can be incorporated into the system to provide clear visibility to the data. What do I mean by handshaking and reconciliation? Some might consider these to be a single concept; however, I like to consider them in two unique categories. Handshaking serves as message receipts or acknowledgment. When one transmits messages to another, the receiver must acknowledge each message by sending immediate responses for each transaction. Whenever we use Web Services, handshaking is often achieved utilizing request/reply pattern. Similarly, if Ftp is used, a receiver can acknowledge by dropping messages for the sender as soon as the files are picked up. These forms of handshaking or acknowledgment informs the message sender and receiver that a successful transaction has occurred. I have mentioned earlier that it could take anywhere from a few seconds to a number of days before shared data is completely processed. In addition, whenever a batched transaction is used, processing time for each data element inside the batch could also vary significantly. So, in order to successfully manage data processing, reconciliation becomes extremely important; otherwise it may result into data loss or in some cases hefty penalty. Reconciliation can be done in many ways. Partner organizations can share and compare ad hoc reports to achieve reconciliation. On the other hand, partners can agree on some type of systematic reconciliation messages. Systems within responsible parties can trigger messages to partners as soon as the data process completes.   Next step in the data transparency is extensive data tracking. Some products such as BizTalk and TIBCO provide built-in functionality for data tracking; however, built-in functionality may not always be adequate. Sometimes additional tracking system (or databases) needs to be built in order monitor all types of data flow including, message transactions, handshaking, reconciliation, system errors and many more. If these types of data are captured, then these can be presented to business users in any forms or fashion. When business users are empowered with such information, then the reliance on developers and support teams decreases dramatically.   In today's collaborative world of information sharing, data transparency is key to the success of every business. The state of business data will constantly change. However, when people have easier access to various states of data, it allows them to make better and quicker decisions. Therefore, I feel that data handshaking, reconciliation and tracking is very important aspect of messaging systems.

  Read the article

• SQL Developer Data Modeler v3.3 Early Adopter: Collaborative Design via Excel?

  - by thatjeffsmith

  As you may have heard last week, we have a new version of Oracle SQL Developer Data Modeler now available as an Early Adopter release. Version 3.3 has quite a few new features and I’ll be previewing them here. Today’s topic is our new Excel integration. It builds off of last week’s lesson: Search, so you may want to go read that first. They say it takes a village to raise a child. I say it takes a team to build a data model. You have your techie folks, your business folks, your in-betweeners, and your database geeks. Who gets to define how customers are represented and stored in your database? That data lives forever, so you better get it right from the beginning, or you’ll be living in a hacker’s paradise for years to come. Lots of good rantings, ravings, and advice on this topic in general on Karen Lopez’s (@datachick) blog. But let’s say you are the primary modeler on a project. You dutifully interview the business folks for their requirements. You sit down and start to model and think you’re pretty close. Now you need someone to confirm your assumptions and provide some feedback. Do you send your model over? Take a screenshot and blow it up on a whiteboard? Export to HTML and let them take a magic marker to their monitors? Or maybe you bite the bullet and install your modeling software on their desktops and take the hours or days required to train them up on how to use the the tool. Wouldn’t it be nice if they could just mark up their corrections in Excel and let you suck the updates back in? This is what we have started to build in Oracle SQL Developer Data Modeler. Let’s say you have a new table called ‘UT_STARTUPS.’ It looks a little something like this: A table in Oracle SQL Developer Data Modeler What I would like to do is have my team or co-worker review how I have defined those columns. Perhaps TIMESTAMP is overkill or maybe the column names themselves aren’t up to snuff. What I am going to do is now search for all the columns in my table, then export that to Excel. So do a search for UT_STARTUPS. Search, filter, then Report With the filter set to ‘Columns,’ if I do a report I’ll be only getting the columns that are resolving to my search term. So as long as my table name is unique in the model, I should get what I’m looking for. Here’s what I see when I click on the Report button: XLS or XLSX, either format is just fine I want to decide how the Column data is exported to Excel though, so I’m going to create a report template that I can use going forward. So click the ‘Manage’ button and setup a new template. I’m going to call mine ‘CollaborativeDevelopment.’ The templates allow me to define what properties are included in the reports. Once this is set, I’ll have the XLS file generated, and get to work Now let the Excel junkies do their stuff Note that not ALL of the report properties are update-able (yes, I made up a new word there) via Excel. We’ll have the full list of properties documented going forward, but in my Excel sheet, note that I can’t change the table name or the data types for the columns. I’m going to update some column names and supply ‘nice’ comments so the database users know what’s what. Here’s my input for the designer/architect/database dude: Be kind, please rew…use comments. Save the file, email it back to your modeler. Update the model from Excel That’s right, it’s a right mouse click from your model in the tree If everything goes right, you’ll see a nice confirmation message: It’s alive! Another to-do item on tap – making this dialog more informative. We’ll be showing exactly what in your model was updated from Excel. Let’s take another look at the model now Voila! Why are we doing this again? The goal is to reduce the number of round-trips from the modeler and the business process owner. One is used to working with Excel – why not allow them to mark up their changes in the tool they already know? This is an early adopter release and I anticipate this feature getting a good bit of tuning up before we release. Why don’t you download 3.3, give it a whirl, and let us know what you think?

  Read the article

• Weekend reading: Microsoft/Oracle and SkyDrive based code-editor

  - by jamiet

  A couple of news item caught my eye this weekend that I think are worthy of comment. Microsoft/Oracle partnership to be announced tomorrow (24/06/2013) According to many news site Microsoft and Oracle are about to announce a partnership (Oracle set for major Microsoft, Salesforce, Netsuite partnerships) and they all seem to be assuming that it will be something to do with “the cloud”. I wouldn’t disagree with that assessment, Microsoft are heavily pushing Azure and Oracle seem (to me anyway) to be rather lagging behind in the cloud game. More specifically folks seem to be assuming that Oracle’s forthcoming 12c database release will be offered on Azure. I did a bit of reading about Oracle 12c and one of its key pillars appears to be that it supports multi-tenant topologies and multi-tenancy is a common usage scenario for databases in the cloud. I’m left wondering then, if Microsoft are willing to push a rival’s multi-tenant solution what is happening to its own cloud-based multi-tenant offering – SQL Azure Federations. We haven’t heard anything about federations for what now seems to be a long time and moreover the main Program Manager behind the technology, Cihan Biyikoglu, recently left Microsoft to join Twitter. Furthermore, a Principle Architect for SQL Server, Conor Cunningham, recently presented the opening keynote at SQLBits 11 where he talked about multi-tenant solutions on SQL Azure and not once did he mention federations. All in all I don’t have a warm fuzzy feeling about the future of SQL Azure Federations so I hope that that question gets asked at some point following the Microsoft/Oracle announcement. Text Editor on SkyDrive with coding-specific features Liveside.net got a bit of a scoop this weekend with the news (Exclusive: SkyDrive.com to get web-based text file editing features) that Microsoft’s consumer-facing file storage service is going to get a new feature – a web-based code editor. Here’s Liveside’s screenshot: I’ve long had a passing interest in online code editors, indeed back in December 2009 I wondered out loud on this blog site: I started to wonder when the development tools that we use would also become cloud-based. After all, if we’re using cloud-based services does it not make sense to have cloud-based tools that work with them? I think it does. Project Houston Since then the world has moved on. Cloud 9 IDE (https://c9.io/) have blazed a trail in the fledgling world of online code editors and I have been wondering when Microsoft were going to start playing catch-up. I had no doubt that an online code editor was in Microsoft’s future; its an obvious future direction, why would I want to have to download and install a bloated text editor (which, arguably, is exactly what Visual Studio amounts to) and have to continually update it when I can simply open a web browser and have ready access to all of my code from wherever I am. There are signs that Microsoft is already making moves in this direction, after all the URL for their new offering Team Foundation Service doesn’t mention TFS at all – my own personalised URL for Team Foundation Service is http://jamiet.visualstudio.com – using “Visual Studio” as the domain name for a service that isn’t strictly speaking part of Visual Studio leads me to think that there’s a much bigger play here and that one day http://visualstudio.com will house an online code editor. With that in mind then I find Liveside’s revelation rather intriguing, why would a code editing tool show up in Skydrive? Perhaps SkyDrive is going to get integrated more tightly into TFS, I’m very interested to see where this goes. The larger question playing on my mind though is whether an online code editor from Microsoft will support SQL Server developers. I have opined before (see The SQL developer gap) about the shoddy treatment that SQL Server developers have to experience from Microsoft and I haven’t seen any change in Microsoft’s attitude in the three and a half years since I wrote that post. I’m constantly bewildered by the lack of investment in SQL Server developer productivity compared to the riches that are lavished upon our appdev brethren. When you consider that SQL Server is Microsoft’s third biggest revenue stream it is, frankly, rather insulting. SSDT was a step in the right direction but the hushed noises I hear coming out of Microsoft of late in regard to SSDT don’t bode fantastically well for its future. So, will an online code editor from Microsoft support T-SQL development? I have to assume not given the paucity of investment on us lowly SQL Server developers over the last few years, but I live in hope! Your thoughts in the comments section please. I would be very interested in reading them. @Jamiet

  Read the article

< Previous Page | 418 419 420 421 422 423 424 425 426 427 428 429  | Next Page >