Search Results

Search found 12484 results on 500 pages for 'host'.

Page 423/500 | < Previous Page | 419 420 421 422 423 424 425 426 427 428 429 430  | Next Page >

• OpenVZ container is running but does not show in vzlist nor can I find the private/conf files for the container

  - by Kakeakeai

  I was creating a new OpenVZ container on one of our VPS Nodes while the power went out for that machine. After bringing the machine back online I could no longer access the container CTID=101. I could not destroy it using "vzctl destroy 101", I can not enter or control it, and "vzlist -a" does NOT display any containers at all (this was a fresh node and the first container was being created). I decided to create a new container at this point assuming that the old container just was not saved for some reason. However when I go to add the ip/host to the new container I get a warning that the IP is already in use. After doing a ping to the IP I realized there was a machine on that IP. I SSH into the machine and discover it is the OLD container that some how is orphaned. I can not find it on the filesystem, I can not find it using VZ commands, and It is set to start on Node boot so it is impossible to shutdown (even ssh in and typing the "shutdown now" command just reboots the container not shut it down). Is this a flaw in OpenVZ or am I missing something? I have all the outputs and logs if needed. Thank you all so much in advance.

  Read the article

• Customizing tmux status to represent current working directory and files

  - by user69397

  I've been playing with this for a couple of days, so I'm sure I'm missing something simple. Love tmux. Using it for development and have so many windows I need a better way of distinguishing them in the status bar and in the buffer list. Seeing a list of "bash" and "vim" isn't really helpful at all. And since they're all on the same host - don't care about the hostname right now. I'd like to show the current working directory, and the file being worked on. For example when I view the list of buffers I currently see: (0) 0: vim [100x44] (1 panes) "murph" (1) 1: vim [100x44] (1 panes) "murph" (2) 2: bash- [100x44] (1 panes) "murph" (3) 3: bash* [100x44] (1 panes) "murph" Here's what I'd like to see 0:vim main.py ~/devl/project1 1:vim index.html ~/devl/samples/staticfiles 2:bash ~/devl/sandbox 3:bash ~/.vimrc I'd like to see similar info in the status bar for each individual window. While I am able to get PWD to show up in the status bar of a window, it's only the working directory from where tmux was launched. This isn't any help as I change directories. I'm hoping this can be done without a bunch of scripts. Thanks all.

  Read the article

• Need a helpful/managed VPS to help transition from shared hosting

  - by Xeoncross

  I am looking for a VPS that can help me transition out of a shared hosting environment. My main OS is Ubuntu, although I am still new to the linux world. I spend most of my day programming PHP applications using a git over SSH workflow. I want PHP, SSH, git, MySQL/PostgreSQL and Apache to work well. Someday after I figure out server management I'll move on to http://nginx.org/ or something. I don't really understand 1) linux firewalls, 2) mail servers, or 3) proper daily package/lib update flow. I need a host that can help with these so I don't get hit with a security hole. (I monitor apache access logs so I think I can take it from there.) I want to know if there is a sub $50/m VPS that can help me learn (or do for me) these three main things I need to run a server. I can't leave my shared hosts (plural shows my need!) until I am sure my sites will be safe despite my incompetence. To clarify again, I need the most helpful, supportive, walk-me-through, check-up-on-me, be-there-when-I-need you VPS I can get. Learning isn't a problem when there is someone to turn too. ;)

  Read the article

• Windows VPN client connect on different port

  - by John Gardeniers

  Scenario: Two Windows Server 2003 machines running RRAS VPNs. The firewall port forwards 1723 to one of those machines for normal remote access. I'd like to find a way to connect to the second machine as well. Not because I need to but just because it's the sort of thing I reckon should be possible but can't figure out how to do. Is it possible to have the Windows PPTP VPN client (on XP in this instance) connect on a port other than 1723? If so, I can simply port forward another port to the second server. I've done a fair bit of Googling over the last few days and have only found others asking the same question but no answers. I have of course tried to add a port number in the host name or IP connection box, in various formats, but to no avail. While this might be possible with a third part client I'm really only interested in whether or not it can be done with the Windows built-in client and if so how?. Perhaps there's a registry hack I'm not aware of?

  Read the article

• PHP Not Automatically Updating With ?reload=1

  - by user32007

  A friend built a ranking system on his site and I am trying to host in on mine via wordpress and godaddy. It updates for him but when I load it to my site, it works for 6 hours, but as soon as the reload is supposed to occur, it errors and I get a 500 timeout error. His page is at: jeremynoeljohnson .com/yakezieclub My page is currently at http://sweatingthebigstuff.com/yakezieclub but when you ?reload=1 it will give the error. Any idea why this might be happening? Any settings that I might need to change? Here is the top of the index.php file. I'm not sure which part of any of it is messing up. I literally uploaded the same code as him. Here's the reload part: $cachefile = "rankings.html"; $daycachefile = "rankings_history.xml"; $cachetime = (60 * 60) * 6; // every 6 hours, the cache refreshes $daycachetime = (60 * 60) * 24; // every 24 hours, the history will be written to - or whenever the page is requested after 24 hours has passed $writenewdata = false; if (!empty($_GET['reload'])) { if ($_GET['reload']== 1) { $cachetime = 1; } } if (!empty($_GET['reloadhistory'])) { if ($_GET['reloadhistory'] == 1) { $daycachetime = 1; $cachetime = 1; } } if (file_exists($daycachefile) && (time() - $daycachetime < filemtime($daycachefile))) { // Do nothing } else { $writenewdata = true; $cachetime = 1; } // Serve from the cache if it is younger than $cachetime if (file_exists($cachefile) && (time() - $cachetime < filemtime($cachefile))) { include($cachefile); echo ""; exit; } ob_start(); // start the output buffer ?

  Read the article

• Strange issue in header location redirect

  - by hd01

  I have three websites hosted (example1.com, example2.com, example3.com) on a server. There is a page (test.php) on example1.com with just code below inside it: <?php header('Location:http://example2.com/a.php'); ?> When I browse test.php it goes to http://example1.com/a.php . it doesn't understand it is another domain url, it tried to find the page on itself. but when I put http://google.com instead of example2.com/a.php it works correct. I really get confused. What is the problem ? Should I set some configuration on the server? ( I am administrator of the hosting server ). Ps. The server is behind a pound server. Here's the Firebug Net output for example1.com/test.php Response Headers: HTTP/1.1 302 Found Date: Tue, 09 Oct 2012 09:03:34 GMT Server: Apache/2.2.16 (Debian) Location: http://example1.com/a.php Vary: Accept-Encoding Content-Encoding: gzip Content-Length: 21 Keep-Alive: timeout=15, max=100 Connection: Keep-Alive Content-Type: text/html; charset=utf-8 Request Headers: Accept text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Encoding gzip, deflate Accept-Language en-us,en;q=0.5 Connection keep-alive Cookie mycookie Host example1.com User-Agent Mozilla/5.0 (X11; Linux i686; rv:14.0) Gecko/20100101 Firefox/14.0.1

  Read the article

• PFSence VPN Routing

  - by SvrGuy

  We use PFSense firewalls at three installations with the following LAN networks: 1.) Datacenter #1: 10.0.0.0/16 2.) Datacenter #2: 10.1.0.0/16 3.) HQ: 10.2.0.0/16 All of these locations are linked via an IPSEC tunnel that works properly. Hosts in any of the above networks can communicate with hosts in any other of the above networks. Now, for our laptops etc. we established a road warrior network 10.3.0.0/16 and have implemented OpenVPN to link the laptops etc. to Datacenter #1. This works great too, so our laptops can connect and communicate with any host in Datacenter #1 (anything on 10.0.0.0/16) The problem is the laptops can't communicate with any hosts that Datacenter #1 can reach by its IPSEC tunnel to Datacenter #2 (and/or the HQ for that matter). Does anyone know what to do configuration wise on the PFSense box in Datacenter #1 to configure to route packets received on the OpenVPN tunnel to Datacenter #2 over the IPSEC tunnel? It could be a setting on the OpenVPN or some sort of static route or some such. Any ideas?

  Read the article

• stopping fastcgi_cache for php-enabled custom error page

  - by Ian

  Since enabling the fastcgi_cache on my nginx server, my php-enabled custom error page has suddenly stopped working and I'm getting the internal 404 message instead. In nginx.conf: fastcgi_cache_path /var/lib/nginx/fastcgicache levels=1:2 keys_zone=MYCACHE:5m inactive=2h max_size=1g loader_files=1000 loader_threshold=2000; map $http_cookie $no_cache { default 0; ~SESS 1; } fastcgi_cache_key "$scheme$request_method$host$request_uri"; add_header X-My-Cache $upstream_cache_status; map $uri $no_cache_dirs { default 0; ~^/(?:phpMyAdmin|rather|poll|webmail|skewed|blogs|galleries|pixcache) 1; } the cache relevant stuff in my fastcgi.conf: fastcgi_cache MYCACHE; fastcgi_keep_conn on; fastcgi_cache_bypass $no_cache $no_cache_dirs; fastcgi_no_cache $no_cache $no_cache_dirs; fastcgi_cache_valid 200 301 5m; fastcgi_cache_valid 302 5m; fastcgi_cache_valid 404 1m; fastcgi_cache_use_stale error timeout invalid_header updating http_500; fastcgi_ignore_headers Cache-Control Expires; expires epoch; fastcgi_cache_lock on; If I disable the fastcgi_cache, the php-enabled 404 page works as it has for years. How would I disable the cache for the custom error page?

  Read the article

• Allow outgoing connections for DNS

  - by Jimmy

  I'm new to IPtables, but I am trying to setup a secure server to host a website and allow SSH. This is what I have so far: #!/bin/sh i=/sbin/iptables # Flush all rules $i -F $i -X # Setup default filter policy $i -P INPUT DROP $i -P OUTPUT DROP $i -P FORWARD DROP # Respond to ping requests $i -A INPUT -p icmp --icmp-type any -j ACCEPT # Force SYN checks $i -A INPUT -p tcp ! --syn -m state --state NEW -j DROP # Drop all fragments $i -A INPUT -f -j DROP # Drop XMAS packets $i -A INPUT -p tcp --tcp-flags ALL ALL -j DROP # Drop NULL packets $i -A INPUT -p tcp --tcp-flags ALL NONE -j DROP # Stateful inspection $i -A INPUT -m state --state NEW -p tcp --dport 22 -j ACCEPT # Allow established connections $i -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT # Allow unlimited traffic on loopback $i -A INPUT -i lo -j ACCEPT $i -A OUTPUT -o lo -j ACCEPT # Open nginx $i -A INPUT -p tcp --dport 443 -j ACCEPT $i -A INPUT -p tcp --dport 80 -j ACCEPT # Open SSH $i -A INPUT -p tcp --dport 22 -j ACCEPT However I've locked down my outgoing connections and it means I can't resolve any DNS. How do I allow that? Also, any other feedback is appreciated. James

  Read the article

• How can I get mouse capture to work in virtualbox when I move guest window to second monitor?

  - by Dan

  I'm running VirtualBox on a Win7 host. Guest OS is Centos. My setup is a laptop (screen 1) with a huge external monitor (screen 2). I'm only telling Centos there is one monitor though. When I start up VirtualBox on screen 1, the mouse capture works fine. I don't have mouse integration because (I think) the kernel on Centos is too old to support it. That's fine, I don't mind doing the Right-Control thing. The problem I have is that when I drag the whole VM window over to my second monitor, the mouse capture doesn't work right anymore. I click inside the VM and can move the VM cursor a little bit, but I can't always get to the edges of the VM screen -- before I get all the way to an edge, the cursor will escape from the VM as if I had hit right-control. But it's still captured according to the icon, and if I then hit right-control, the guest cursor jumps to a different screen location. My workaround: if I have the VM window mostly on screen 2, but a small corner of it still on screen 1, then the mouse capture works correctly. Is there a setting to make this work better?

  Read the article

• Good Hosting Providers With Zend Framework Support [closed]

  - by manyxcxi

  I currently use ixwebhosting for my hosting services. They're cheap and work (most of the time). The databases are horribly slow, the servers are horribly slow, and their support (though usually prompt) is tough to deal with. That being said, they're cheap, I've got like 20 domains hosted in my account, none of them are high volume, and they work JUST good enough- until today. This isn't meant to be a condemnation of ixwh though. Their prices are very low for what they do offer and most things work just fine, most of the time. I need to be able to host web apps written with Zend Framework in a fairly easy fashion. The server performance can't be worse than what I've already had (a pretty low hurdle to clear), and I don't want to spend $30/mo. These are not money making websites- they're projects. My requirements are PHP 5.3, ZF support, MySQL databases, multiple domains- not much. Who should I look at, and who should I look out for?

  Read the article

• How do I back up Hyper-V VMs with Windows Server backup on Windows Server 2008 R2?

  - by Chris

  I've searched this site and google, and I CAN find information about how to back up Hyper-V virtual machines by using Windows Server Backup from the Hyper-V host in Windows Server 2008. You have to set up a registry key to enable the Hyper-V VSS writer, and then you can take online backups of your VMs. However, all the information I have found is about a year old, and none of it has been updated for Windows Server 2008 R2. I tried to run the "FixIt" .msi found here: http://support.microsoft.com/kb/958662 ... but it said that it was not applicable to my operating system. So I am thinking either Windows Server 2008 R2 already has its VSS service for Hyper-V enabled, or it still needs to be enabled but the FixIt package doesn't feel comfortable operating on an OS that wasn't RTM at the time. I went ahead and scheduled a windows server backup for 9pm tomorrow. It said it would take 86 GB, which means it MUST be counting those VMs. But will this backup fail? Can anyone confirm whether you have to apply the same registry changes for R2?

  Read the article

• ssh Password-less login to multiple machines when you already have one

  - by tandu

  I'm a little bit confused about setting up a password-less login for multiple machines to begin with, but I think I could do it from scratch. The problem is I already have it set up for one machine and I don't want that to be blown away when I try to set it up for the other machine. Let's clarify: Machine A: the machine I'm connecting from Machine B: the machine I'm connecting to. Password required Machine C: the machine I'm connecting to. Password-less ssh I have read some tutorials on setting up password-less ssh to a certain site, but they usually start with "move id_rsa out of the way so it doesn't get blown away," but then at the end of the tutorial it's not moved back. If I had no help at all, here is what I would do: Log into B ssh-keygen -t rsa -f ~/id_rsa.other scp id_rsa.other.pub A:~/.ssh echo "Host A \n Identity File ~/.ssh/id_rsa.other" > ~/.ssh/config (Note that I realize these commands may not be exactly correct, but this is just the idea). What I'm not quite clear on is if I need to update the config for A, B, or both. I'm fairly certain to do a password-less login from A to B, it is A that needs the public key .. but I also suppose I need B to use the correct id_rsa file for that public key. Finally, I don't want the password-less login for C to be affected at all .. it's using id_rsa. Am I going wrong anywhere?

  Read the article

• vSphere education - What are the downsides of configuring virtual machines with *too* much RAM?

  - by ewwhite

  VMware memory management seems to be a tricky balancing act. With cluster RAM, Resource Pools, VMware's management techniques (TPS, ballooning, host swapping), in-guest RAM utilization, swapping, reservations, shares and limits, there are a lot of variables. I'm in a situation where clients are using dedicated vSphere cluster resources. However, they are configuring the virtual machines as though they were on physical hardware. In turn, this means a standard VM build may have 4 vCPUs and 16GB or more of RAM. I come from the school of starting small (1 vCPU, minimal RAM), checking real-world use and adjusting up as necessary. Some examples from a "problem" cluster. Resource pool summary - Looks almost 4:1 overcommitted. Note the high amount of ballooned RAM. Resource allocation - The Worst Case Allocation column shows that these VMs would have access to less than 50% of their configured RAM under constrained conditions. The real-time memory utilization graph of the top VM in the listing above. 4 vCPU and 64GB RAM allocated. It averages under 9GB use. Summary of the same VM What are the downsides of overcommitting and overconfiguring resources (specifically RAM) in vSphere environments? Assuming that the VMs can run in less RAM, is it fair to say that there's overhead to configuring virtual machines with more RAM than they need? What is the counter-argument to: "if a VM has 16GB of RAM allocated, but only uses 4GB, what's the problem??"? E.g. do customers need to be educated? What specific metric should be used to meter RAM usage. Tracking the peaks of "Active" versus time?

  Read the article

• Join Domain from VM

  - by Adis

  I have two VMs running on VMWare Player. I use NAT adapter settings. The host machine for VMs is running on corporate network. First VM has Domain controller running and I can log in on that machine using domain credentials. I named domain wm.local When I run IP config on this machine: IP: 192.168.87.132 Def Gataway: 192.168.87.2 DNS server: 192.168.87.2 DHCP server: 192.168.87.254 Second VM cannot join domain. When I try it with domain WM I'm propmted for credentials. And I enter Administrator credentials and than it waits for some time and I get response: "The specified domain either does not exist or could not be contacted" If i type wm.local as domain when trying to join it does not prompt me to login but just shows "An Active Directory Domain Controller (AD DC) for the domain wm.local could not be contacted. And here it takes no time to get this error message. Ipconfig on this machine: IP: 192.168.87.134 Def Gataway: 192.168.87.2 DNS server: 192.168.87.2 DHCP server: 192.168.87.254 I can ping second VM from first one. And I disabled firewalls on both machines. Any ideas? Is there any manual for this?

  Read the article

• How can I password protect & let cgi-bin to work?

  - by jaaaaaaax

  This is taken from sites-available directory. It's a virtual host setting for apache. Accessing myiphere/cgi-bin/ throws 403. The directory setting for /var/www2/ drwxrwxrwx 8 www-data www-data NameVirtualHost myiphere <VirtualHost myiphere> ServerAdmin webmaster@localhost DocumentRoot /var/www2/ <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www2/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined ServerSignature On Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory>

  Read the article

• Windows 7 Sharing issue on RAID 5 Array(s)

  - by K.A.I.N

  Greetings all, I'm having a very odd error with a windows 7 ultimate x64 system. The network system setup is as follows: 2x XP Pro 32 Bit machines 1x Vista ultimate x64 machine 2x Windows 7 x64 Ultimate machines all chained into 1x 16 port netgear prosafe gigabit switch, the windows 7 & vista machines are duplexed. Also there is a router (netgear Rangemax) chained off the switch I am basically using one of the windows 7 machines to host storage & stream media to other machines. To this end i have put 2x 3tb hardware RAID 5 arrays in it and assorted other spare disks which i have shared the roots of. The unusual problems start when i am getting Access denied, Please contact administrator for permission blah blah blah when trying to access both of the RAID 5 arrays but not the other stand alones. I have checked the permission settings, i have added everyone to the read permission for the root, i have tried moving things into sub directories then sharing them. I have tried various setting combinations in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa and always the same. I have tried flushing caches all round, disabling and re-enabling shares & sharing after restart as well as several other things & the result is always the same... No problem on individual drives but access denied on both the RAID arrays from both XP & Vista & Windows 7 machines. One interesting quirk that may lead to an answer is that there is no "offline status" information regarding the folders when you select the RAID 5s from a windows 7 machine yet there is on the normal drives which say they are online. It is as if the raid is present but turned off or spun down but as far as i was aware windows will spin an array back up on network request and on the machine itself the drives seem to be online and can be accessed. Have to admit this has me stumped. Any suggestions anyone? Thanks in advance for any fellow geek assistance. K.A.I.N

  Read the article

• Is there any functional-like unix shell?

  - by Caruccio

  I'm (really) newbie to functional programming (in fact only had contact with it using python) but seems to be a good approach for some list-intensive tasks in a shell environment. I'd love to do something like this: $ [ git clone $host/$repo for repo in repo1 repo2 repo3 ] Is there any Unix shell with these kind of feature? Or maybe some feature to allow easy shell access (commands, env/vars, readline, etc...) from within python (the idea is to use python's interactive interpreter as a replacement to bash). EDIT: Maybe a comparative example would clarify. Let's say I have a list composed of dir/file: $ FILES=( build/project.rpm build/project.src.rpm ) And I want to do a really simple task: copy all files to dist/ AND install it in the system (it's part of a build process): Using bash: $ cp ${files[*]} dist/ $ cd dist && rpm -Uvh $(for f in ${files[*]}; do basename $f; done)) Using a "pythonic shell" approach (caution: this is imaginary code): $ cp [ os.path.join('dist', os.path.basename(file)) for file in FILES ] 'dist' Can you see the difference ? THAT is what i'm talking about. How can not exits a shell with these kind of stuff build-in yet? It's a real pain to handle lists in shell, even its being a so common task: list of files, list of PIDs, list of everything. And a really, really, important point: using syntax/tools/features everybody already knows: sh and python. IPython seams to be on a good direction, but it's bloated: if var name starts with '$', it does this, if '$$' it does that. It's syntax is not "natural", so many rules and "workarounds" ([ ln.upper() for ln in !ls ] -- syntax error)

  Read the article

• Single application through OpenVPN tunnel (Debian Lenny)

  - by user14124

  I'm using Debian Lenny and I want to tunnel rtorrent only through a OpenVPN tunnel. I have a tunnel running, the config file looks like this: client dev tun proto udp remote openvpn.xxx.com 1194 resolv-retry infinite nobind persist-key persist-tun ca /etc/openvpn/xxx/keys/ca.crt cert /etc/openvpn/xxx/keys/client.crt key /etc/openvpn/xxx/keys/client.key tls-auth /etc/openvpn/xxx/keys/tls.key 1 ns-cert-type server comp-lzo verb 3 auth-user-pass script-security 3 reneg-sec 0 My idea is that I could run a sockd proxy internally that redirects traffic to the openvpn tunnel. I could use the *nix "proxifier" application "tsocks" to make it possible for rtorrent to connect through that proxy (as rtorrent doesn't support proxies). I have trouble configuring sockd as my IP inside the VPN changes every time I connect. This is a config file someone said would help: http://ircpimps.org/sockd.conf As my IP changes at each connect I don't know what to put in that config file. I have no control over the host side config file. Any help wanted. Any other method is very welcome.

  Read the article

• Samba access works with IP address only

  - by Sebastian Rittau

  I added a Debian etch host (hostname: webserver, IP address: 192.168.101.2) running Samba to a Windows network with a Windows 2003 PDC (IP address 192.168.101.3). The Samba server exports a public guest share, called "Intranet". The server shows up fine in the network, but trying to click on it produces an error dialog, stating I don't have the necessary permissions. So does entering \webserver manually and using \webserver\internet states that the path does not exist. Interestingly, accessing the share by IP address (\192.168.101.2 or \192.168.101.2\intranet) works fine. DNS is configured correctly, and "smbclient //webserver/intranet" on another Linux client works fine. One complicating issue is that the webserver is only a VMware virtual machine running on PDC server. Here is our smb.conf: [global] workgroup = Foobar server string = Webserver wins support = yes ; commenting out these wins server = 192.168.101.3 ; two lines has no effect dns proxy = no guest account = nobody [... snipped some unrelated bits, like logging ...] security = share [... snipped some password-related things ...] domain master = no [intranet] comment = Intranet path = /srv/webserver/contents browseable = yes guest ok = yes guest only = yes read only = yes create mask = 0775 directory mask = 0775

  Read the article

• File corruption (bad checksums) in large files copied to VMware guest

  - by AllanA

  In setting up a development lab, I've got a desktop system running ESXi 4.1.0 (free license) on SATA RAID 0 (already purchased and configured when I started this job; I'm open to hardware input as it pertains to my problem.) Its guests so far include two Win2008 Server R2 64-bit VMs and on Ubuntu 10.04 64-bit VM. I'm installing onto the Windows servers. We've been copying off some fairly large files (over a gigabyte) for an installation, hoping to install more quickly from a (virtual) hard drive than from the network for from BD-ROM. The problem is that they keep coming up with different checksums from the originals. The file sizes are the same, but md5sum reports different numbers (and so does the installer, as it refuses to continue when the checksums don't match.) I've tried copying directly from the BD-ROM (attaching the OS drive to the host system's physical drive). I've tried copying the large files onto a co-worker's Windows machine from his Blu-Ray drive; when I do that, the checksums match. But when I copy from his machine to the VM guest over a network share, the checksums no longer match. Thinking this meant a corrupt destination drive, I deleted it in vSphere and added another freshly created drive. The problem persists. I'm not sure what to try next.

  Read the article

• Google MAIL not arriving - relay not allowed

  - by renevdkooi

  I have a server with sendmail, hosting my domain mind-zone.nl, i changed the MX records to point to the server. When I use Hotmail or any other client the email arrives and everything is fine. ONLY mail from GMAIL server is bounced and gmail returns "relay denied". I have set all the virtual server host settings etc, from command line I can send mails as well, hotmail works, etc. Just not gmail. The strange thing is, this is what gmail returns: Look at the lower part: "Received by" it returns some IP address which is not mine and has absolutely nothing with my domain. While when I do a NSLOOKUP and change to google's DNS server it will state that the IP Address for my domain is correctly pointing at my server. Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 554 554 5.7.1: Relay access denied (state 14). ----- Original message ----- MIME-Version: 1.0 Received: by 10.14.37.138 with SMTP id y10mr3421504eea.43.1297665573901; Sun, 13 Feb 2011 22:39:33 -0800 (PST) Received: by 10.14.29.75 with HTTP; Sun, 13 Feb 2011 22:39:33 -0800 (PST)

  Read the article

• Our clients site is redirecting to a pill scammy site [closed]

  - by Alex Demchak

  Possible Duplicate: My server's been hacked EMERGENCY We've usually host our clients site, but we aren't hosting this one. The website itself (weddle-funeral.com) works just fine. if you load google and search for weddle funeral stayton oregon - and click that link, the site links to a scammy pill site. I went through the site and there were some php files in the wordpress plugins that got quarantined by my antivirus. I removed ALL non essential files, and uploaded fresh versions of all the plugins, but it's STILL redirecting from google. I tried logging in to the cpanel (on a virtual private server), and the cpanel flashed a red warning screen The site's security certificate is not trusted! You attempted to reach XXXXX.com, but the server presented a certificate issued by an entity that is not trusted by your computer's operating system. This may mean that the server has generated its own security credentials, which Google Chrome cannot rely on for identity information, or an attacker may be trying to intercept your communications. You should not proceed, especially if you have never seen this warning before for this site. (Keep in mind, that's for the HOSTING accounts CPanel) Is there something in the SERVER probably that's causing the redirect? EDIT: .htaccess file contents # BEGIN WordPress <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteRule ^index\.php$ - [L] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /index.php [L] </IfModule> # END WordPress

  Read the article

• Is NFS capable of preserving order of operations?

  - by JustJeff

  I have a diskless host 'A', that has a directory NFS mounted on server 'B'. A process on A writes to two files F1 and F2 in that directory, and a process on B monitors these files for changes. Assume that B polls for changes faster than A is expected to make them. Process A seeks the head of the files, writes data, and flushes. Process B seeks the head of the files and does reads. Are there any guarantees about how the order of the changes performed by A will be detected at B? Specifically, if A alternately writes to one file, and then the other, is it reasonable to expect that B will notice alternating changes to F1 and F2? Or could B conceivably detect a series of changes on F1 and then a series on F2? I know there are a lot of assumptions embedded in the question. For instance, I am virtually certain that, even operating on just one file, if A performs 100 operations on the file, B may see a smaller number of changes that give the same result, due to NFS caching some of the actions on A before they are communicated to B. And of course there would be issues with concurrent file access even if NFS weren't involved and both the reading and the writing process were running on the same real file system. The reason I'm even putting the question up here is that it seems like most of the time, the setup described above does detect the changes at B in the same order they are made at A, but that occasionally some events come through in transposed order. So, is it worth trying to make this work? Is there some way to tune NFS to make it work, perhaps cache settings or something? Or is fine-grained behavior like this just too much expect from NFS?

  Read the article

• Is it logical that file system acls would be corrupted in a way that adds permission for another user?

  - by wilbbe01

  I was having issues on a shared hosting provider with the host's web server instance not serving some files. I asked the companies support about the issue and they responded with the results of getfacl on my home directory, and added the necessary line to allow their web server to obtain the necessary permissions. All is working happily now, but I noticed a line in the getfacl that was for what appeared to be another username to which I had no relation. I asked them about this and their response was that it was likely some minor corruption and that I could remove the unwanted line with the setfacl -x option. I know I never added the user to my home directory, and I also find it weird that that could truly happen due to corruption. So now that it is fixed I'm a little bit weary of whether or not they were trying to cover up a problem they accidentally gave someone permissions to my account, or if this kind of thing can really be corrupted in that way. Especially when that user is a real user on the same server. Any thoughts? Thanks.

  Read the article

< Previous Page | 419 420 421 422 423 424 425 426 427 428 429 430  | Next Page >