Search Results

Search found 25856 results on 1035 pages for 'mac vs pc'.

Page 424/1035 | < Previous Page | 420 421 422 423 424 425 426 427 428 429 430 431  | Next Page >

• DD-WRT (WRT54G) and (THOMSON TG782) how to put them togather?

  - by FeRtoll

  Ok so let me explain, i bought WRT54G and successfully installed DD-WRT v24-sp1 (07/26/08) mini-special - build 9994. That's all ok no problems with it all normal functioning. And just to add (i don't need wireless, wireless is turned off always) What i want: ISP's router (TG782) from it's INTERNET port(out) cable "which was before in my pc" is connected to WRT54G's INTERNET port and then from WRT54G LAN port 1 to my pc. The problem: How do i connect and setup all? I have tried many times on many different ways but cant get it to work IF THE CABLE FROM TG782 IS CONNECTED TO WRT54G ON INTERNET PORT. If i connect the TG782 to Lan port 1 on WRT54G and my pc to lan port 2 then all works fine after i setup gateway and all. But i want to connect TG782 to Internet port of WRT54G because i need "Access Restrictions" and this only goes through WAN right? please correct me if i am wrong. What i have tried: This is how i have tried to setup all. The TG782 router ip is 192.168.1.1 And WRT54G ip is 192.168.1.30 so in WRT54G control panel i have setup like this: ----WAN Connection Type---- Connection Type: Automatic Configuration - DHCP STP: Disabled ----Router IP---- Local IP Address: 192.168.1.30 Subnet Mask: 255.255.255.0 Gateway: 192.168.1.1 (the TG782) ----Network Address Server Settings (DHCP)---- DHCP Type: DHCP Server Start IP Address: 192.168.1.100 Maximum DHCP Users: 6 And this wont work i probably miss something more, if anyone can help i would be thankfull. Also i have to note that i have tried to set my network adapter on pc to use the gateway of WRT54G and ip 192.168.1.102 In short: i cant get it to work normal only as a switch! Thanks for any help! -------EDIT:------- Here is an image which maybe can help: http://img27.imageshack.us/img27/4227/allin1w.jpg

  Read the article

• windows Home Server backup error

  - by domen

  I've finally built my WHS, but some other problems have showed up. I've googled, binged and searched SU with no success. The problem is following: at the moment I've got a Win7 laptop and Win7 PC, which should be backed up by the WHS. Laptop is backed up just fine with no issues, but when I try to manually backup the PC, after "backup is starting" message, when backup service should be monitoring changes on partitions, PC gets disconnected from the home network and thus, the backup process is stuck. Disabling/enabling network adapter gets PC back on the network. The only thing I've tried was reinstalling connector software. no success. Also, I've downloaded connector troubleshooter and only thing it says is "DHCP server was not found". I'm not good with networks, so I couldn't figure out what could that indicate (all computers in the network are assigned static IPs). Any ideas what the problem can be? I can provide any additional information, I'm just not sure what may be helpful right now. Thanks.

  Read the article

• Under which circumstances can a *local* user account access a remote SQL Server with a trusted connection?

  - by Heinzi

  One of our customers has the following configuration: On the domain controller, there's an SQL Server. On his PC (WinXP), he logs on with LocalPC\LocalUser. In Windows Explorer, he opens DomainController\SomeShare and authenticates as Domain\Administrator. He starts our application, which opens a trusted connection (Windows authentication) to the SQL Server. It works. In SSMS, the connection shows up with the user Domain\Administrator. Firstly, I was surprised that this even works. (My first suspicion was that there is a user with the same name and password in the domain, but there is no user LocalUser in the domain.) Then we tried to reproduce the same behaviour on his new PC, but failed: On his new PC (Win7), he logs on with OtherLocalPC\OtherLocalUser. In Windows Explorer, he opens DomainController\SomeShare and authenticates as Domain\Administrator. He starts our application, which opens a trusted connection (Windows authentication) to the SQL Server. It fails with the error message Login failed for user ''. The user is not associated with a trusted SQL Server connection. Hence my question: Under which conditions can a non-domain user access a remote SQL Server using Windows Authentication with different credentials? Apparently, it's possible (it works on his old PC), but why? And how can I reproduce it?

  Read the article

• Remote Desktop to Server 2008 fails from one particular Win7 client

  - by Jesse McGrew

  I have a VPS running Windows Web Server 2008 R2. I'm able to connect using Remote Desktop from my home PC (Windows 7), personal laptop (Windows 7), and work laptop (Windows XP). However, I cannot connect from my work PC (Windows 7). I receive the error "The logon attempt failed" in the RDP client, and the server event log shows "An account failed to log on" with this explanation: Subject: Security ID: NULL SID Account Name: - Account Domain: - Logon ID: 0x0 Logon Type: 3 Account For Which Logon Failed: Security ID: NULL SID Account Name: username Account Domain: hostname Failure Information: Failure Reason: Unknown user name or bad password. Status: 0xc000006d Sub Status: 0xc0000064 Process Information: Caller Process ID: 0x0 Caller Process Name: - Network Information: Workstation Name: JESSE-PC Source Network Address: - Source Port: - Detailed Authentication Information: Logon Process: NtLmSsp Authentication Package: NTLM Transited Services: - Package Name (NTLM only): - Key Length: 0 I can connect from the offending work PC if I start up Windows XP Mode and use the RDP client inside that. The server is part of a domain but my account is local, so I'm logging in using a username of the form hostname\username. None of the clients are part of a domain. The server uses a self-signed certificate, and connecting from home I get a warning about that, but connecting from work I just get the logon error.

  Read the article

• Why am I unable to reach local network computers, but able to browse the web?

  - by Igor Zinov'yev

  I have a weird problem. Today after turning my Ubuntu 9.10 PC on I can't connect to my local network, but I can use the Internet. We have a single Windows 2003 server machine that acts as a local main DNS server, DHCP server and a domain controller. Although it seems to give me the local IP address, I can not ping it, as well as any other machine on the net. I have tried all of the below and it didn't help: Rebooting; Reconnecting to the network; Forcing the dhclient to renew the IP address; Deleting and creating new connection profiles; Plugging my machine into another network outlet; Maybe it has something to do with routing, because I have tampered with routing tables the day before, but the tables seem ok to me: $ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.0.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 vboxnet0 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 Our LAN uses a D-Link DI-604 router, and it looks to me as if I am connected to the network outside the router. I can not even access its administration page. Please at least suggest what I can do to solve this. P.S. What seems strangest to me is that I can access the PC in question from outside the network by opening a port on the router. I have managed to ssh to it from outside, but I still can't ping nothing on the inside. P.P.S Today I tried reinstalling network-manager with --purge option, but it did no good. After that I created a new DCHP reservation for my PC in order to change my local IP, but that didn't change anything either. My PC is able to get a DHCP offer, but then it's unable to connect to any local computers. I am desperate.

  Read the article

• IIS 6 302, 401 Error

  - by lvandiest

  I'm having some problems accessing an ASP.NET website hosted on an internal iis 6 server that I am maintaining. Some users can get to the site, others (including myself can't). The app has Windows Authentication mode set in the web.config file, and Integrated Windows Authentication checked in the Website properties. Anonymous access is not checked. In the IIS logs, I see 2 lines when I make a request for the site's default page (Default.aspx). The first is a 401.2 error, and the 2nd is a 302.0 error. I've tried switching around as many security settings as I can think of, but had no luck yet. Can someone please help? I'm mainly a programmer, but have done a little IIS administration, so it is probably something quite simple I am missing. -- here are the log entries for my request to Default.aspx 2011-01-11 21:17:35 10.100.1.6 GET /MonthEndInventory/Default.aspx - 80 - 10.100.1.111 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.1;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0;+OfficeLiveConnector.1.4;+OfficeLivePatch.1.3;+.NET+CLR+1.1.4322;+Tablet+PC+2.0;+.NET4.0C;+.NET4.0E;+InfoPath.3;+MS-RTC+LM+8) 401 2 2148074254 2011-01-11 21:17:35 10.100.1.6 GET /MonthEndInventory/Default.aspx - 80 DOMAIN\myuserid 10.100.1.111 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.1;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0;+OfficeLiveConnector.1.4;+OfficeLivePatch.1.3;+.NET+CLR+1.1.4322;+Tablet+PC+2.0;+.NET4.0C;+.NET4.0E;+InfoPath.3;+MS-RTC+LM+8) 302 0 0

  Read the article

• tod to avi mpg wmv, convert tod (.mpeg-2) to avi mpg wmv for Movie Maker.

  - by yearofhao

  Need to convert .tod (mpeg-2) to avi mpg wmv download from JVC Everio to PC with tod to avi mpg wmv converter convert tod to uncompressed/raw avi, mpg wmv Have a JVC Everio camcorder? Then you may encounter problems when saving the .tod files to your computer windows movie maker says it can't recognize and edit them to make videos. You may play them using media player but the problem is how to edit them? The bundled software Power cinema could be annoying, since you can only edit when the camera is plugged in to the PC - Power cinema can’t seem to edit from the saved clips alone. So, how do you save them to PC so that you can edit them without the camera and also using windows movie maker? JVC Everio Tod to avi mpg wmv converter costs you a penny to but help you perfectly convert tod file to AVI, MPG, WMV, YouTube FLV, MP4, DV, QuickTime.MOV or other common video formats with fast speed and while keeping the original HD quality. High definition TOD recordings from JVC Camcorders can playback fluidly, convert smoothly and edit professionally on with iOrgsoft TOD file converter iOrgsoft tod to avi mpg wmv Converter has been mostly used by Windows users who use Windows 7 or Vista, after the .tod (mpeg-2 the same codec) downloaded from JVC Everio to PC, it’s best to convert tod to avi, convert to xvid divx, convert tod to uncompressed avi or convert tod to raw avi, tod to mpg, tod to wmv, which are three Windows movie maker best formats to import. TOD to avi mpg wmv converter is a competent video-editing program that allows you to clip/cut TOD video clip, crop the video to encode, and help transfers video to devices like iPhone, iPod, to HDTV connected with Apple TV.

  Read the article

• What is the best VM for developing WPF apps from within OS X?

  - by MarqueIV

  All of my machines are Macs (Mac Pro, MacBook Pro, MacBook Air and Mac Mini (and Apple TV 2.0 too! :) ) but for my day-job, I develop .NET/WPF applications. Normally I just boot into Boot Camp and develop that way, which of course works great, but there are times when I need to simultaneously get to things on my Mac-side of the equation, so I've bought both VMware 3.1 and Parallels 6. Both work, however, even on my Mac Pro where I paid to upgrade to the better video cards (the NVidia 8600s I think vs. the stock ATI cards) the WPF performance bites!! Now this confuses me since both boast that they support not only hardware-accelerated OpenGL 2.1, but also hardware-accelerated DirectX 9 (VMware even allegedly supports DirectX 10!) via their respective virtual drivers and both can run 3D games just fine, even in a window. But even the simple act of resizing a WPF window that has a tiled background results in some HIDEOUS repainting and resizing behaviors. It's damn near closer to what you'd expect over RDP let alone a software-only renderer (forget accelerated hardware completely!) So... can anyone please tell me WTF WPF is doing differently? More importantly, how can I speed up the WPF performance? Should I switch to VirtualBox that also has support for DirectX? Or am I just gonna have to 'byte' the bullet (sorry... had to. So I like puns! Thank Jon Stewart!) and continue using Boot Camp?

  Read the article

• Ubuntu Server attack? how to solve?

  - by saky

  Hello, Something (Someone) is sending out UDP packets sent from our whole ip range. This seems to be multicast DNS. Our server host provided this (Our IP Address is masked with XX): Jun 3 11:02:13 webserver kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:30:48:94:46:c4:08:00 SRC=193.23X.21X.XX DST=224.0.0.251 LEN=73 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=53 Jun 3 11:02:23 webserver kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:30:48:94:46:c4:08:00 SRC=193.23X.21X.XX DST=224.0.0.251 LEN=73 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=53 Jun 3 11:02:32 webserver kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:30:48:94:46:c4:08:00 SRC=193.23X.21X.XX DST=224.0.0.251 LEN=73 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=53 Jun 3 11:02:35 webserver kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:30:48:94:46:c4:08:00 SRC=193.23X.21X.XX DST=224.0.0.251 LEN=73 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=53 I checked my /var/log/auth.log file and found out that someone from China (Using ip-locator) was trying to get in to the server using ssh. ... Jun 3 11:32:00 server2 sshd[28511]: Failed password for root from 202.100.108.25 port 39047 ssh2 Jun 3 11:32:08 server2 sshd[28514]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=202.100.108.25 user=root Jun 3 11:32:09 server2 sshd[28514]: Failed password for root from 202.100.108.25 port 39756 ssh2 Jun 3 11:32:16 server2 sshd[28516]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=202.100.108.25 user=root ... I have blocked that IP address using this command: sudo iptables -A INPUT -s 202.100.108.25 -j DROP However, I have no clue about the UDP multicasting, what is doing this? who is doing it? and how I can stop it? Anyone know?

  Read the article

• How to forever disable driver signature enforcement in Windows 8

  - by IneedHelp

  Is there a way to forever disable driver signature enforcement in Windows 8? I keep seeing this solution posted on various blogs and forums: bcdedit -set loadoptions DISABLE_INTEGRITY_CHECKS bcdedit -set TESTSIGNING ON but it is not working, at least not like when you manually disable driver signature enforcement. To disable driver signature enforcement, I currently have to do this everytime I restart my PC: 1. From the Metro Start Screen, open Settings (move your mouse to the bottom-right-corner of the screen and wait for the pop-out bar to appear, then click the Gear icon). 2. Click ‘More PC Settings’. 3. Click ‘General’. 4. Scroll down, and click ‘Restart now’ under ‘Advanced startup’. 5. Click ‘Troubleshoot’. 6. Click ‘Advanced Options’ 7. Click ‘Windows Startup Settings’ 8. Click Restart. Is there at least a way to create a shortcut or something? F8, Shift+F8 don't work any more at boot. These MS developers freaks really want everything their way only. What's worse is that when I have to power up my PC, I first have to start normally and then restart with driver signature enforcement disabled, because there is no way to tell Windows 8 to show the troubleshoot screen when a PC is powered up.

  Read the article

• Sandra reports my CPU as "Engineering Sample", how can I be sure this is correct?

  - by stevenvh

  I ran SiSoftware's Sandra on my new PC, and for my CPU it reports: Generation : G8 / T29 Name : TN0 (Trinity) FX/Opteron 32nm (ES) Revision/Stepping : 0 : 10 / 1 Stepping Mask : TN-A1 Microcode : MU6F10010F The (ES) is a well-known code in product development, meaning "Engineering Sample". Those are beta versions of the CPU, which still may contain some bugs, or even have features switches off. I contacted both the PC's manufacturer Medion as well as AMD about this. I had to downvote the Medion helpdesk here. The person I talked to boldly said Sandra was wrong (without knowing how Sandra got this information; he didn't even know the software), and used the word "impossible". His conclusion was "We’re not taking this in consideration for service”. Right. So, if you like Medion for their good prices, but like good support even better, you may consider buying your PC elsewhere. AMD was more helpful, but wanted to be sure before replacing the part (which I find reasonable). They suggested that I dismount the cooler from the CPU to check what was printed on it to be sure. I'm a bit reluctant here: I would have to wipe the thermal paste from the CPU, and won't know for sure my cooling will still be OK afterwards. Questions Has anybody actually found a confirmed ES CPU in her PC? Is anybody aware of Sandra erroneously reporting CPUs as Engineering Samples? How can you tell an ES, apart from the print on the package? Shouldn't Stepping Mask identify the CPU uniquely?

  Read the article

• Windows 2008 R2 Servers Sending Arp Requests for IPs outside Subnet

  - by Kyle Brandt

  By running a packet capture on my my routers I see some of my servers sending ARP requests for IPs that exist outside of its network. For example if my network is: Network: 8.8.8.0/24 Gateway: 8.8.8.1 (MAC: 00:21:9b:aa:aa:aa) Example Server: 8.8.8.20 (MAC: 00:21:9b:bb:bb:bb) By running a capture on the interface that has 8.8.8.1 I see requests like: Sender Mac: 00:21:9b:bb:bb:bb Sender IP: 8.8.8.20 Target MAC: 00:21:9b:aa:aa:aa Target IP: 69.63.181.58 Anyone seen this behavior before? My understanding of ARP is that requests should only go out for IPs within the subnet... Am I confused in my understanding of ARP? If I am not confused, anyone seen this behavior? Also, these seem to happen in bursts and it doesn't happen when I do something like ping an IP outside of the network. Update: In response to Ian's questions. I am not running anything like Hyper-V. I have multiple interfaces but only one is active (Using BACS failover teaming). The subnet mask is 255.255.255.0 (Even if it were something different it wouldn't explain an IP like 69.63.181.58). When I run MS Network Monitor or wireshark I do not see these ARP requests. What happens is that on the router capturing I see a burst of about 10 requests for IPs outside of the network from the host machine. On the machine itself using wireshark or NetMon I see a flood of ARP responses for all the machines on the network. However, I don't see any requests in the capture asking for those responses. So it seems like maybe it is maybe refreshing the arp cache but including IPs that outside of the network. Also when it does this NetMon doesn't show the ARP requests?

  Read the article

• Windows Firewall Software to Filter Transit Traffic

  - by soonts

  I need to test my networking code for Nintendo Wii under the conditions when some specific Internet server is not available. Wii is connected to my PC with crossover ethernet cable. PC has 2 NICs. PC is connected to hardware router with ethernet cable. The hardware router serves as NAT and has an internet connected to its uplink. I set the Wii to be in the same lan as PC by using Windows XP Network bridge. I can observe the WII network traffic using e.g. Wireshark sniffer. Is there a software firewall that can selectively filter out transit traffic? (e.g. block outgoing TCP connections to 123.45.67.89 to port 443) I tried Outpost Pro 2009 and Comodo. Outpost firewall blocks all transit traffic with it's implicit "block transit packet" rule. If the transit traffic is explicitly allowed by creating the system-wide low level rule, then it's allowed completely and no other filter can selectively block it. Comodo firewall only process rules when the packet has localhost's IP as either source or destination, allowing the rest of the traffic. Any ideas? Thanks in advance! P.S. Platform is Windows XP 32 bit, no other OSes is allowed, Windows ICS (Internet Connection Sharing) doesnt work since the Wii is unable to connect, becides I don't like the idea of adding one more level of NAT.

  Read the article

• How to diagnose remote assistance problem

  - by cantabilesoftware

  I have a long standing issue with remote assistance between a home and work PC. My wife and I both use MSN messenger and I used to be able to control her PC at home via MSN Remote Assistance. Some time ago however this stopped working and I don't know why. We're both running the latest versions of MSN Live Messenger and I've checked the appropriate firewall ports are open, but it still doesn't work and MSN just says something useless like "The person isn't responding". Any suggestions for how can I diagnose this? More info: I just tried direct Remote Desktop between work PC and home PC and it works fine - so I presume all the appropriate ports are open. Just Remote Assistance doesn't work. I'd like to get RA working so I can demonstrate how to do things remotely. With Remote Desktop the person at the other end gets booted off and can't see. With Remote Assistance they can follow along step by step. Some comments below suggest using other solutions, which is fine and do work, but there must be a way to diagnose RA and get it working. Experimenting with this some more, the notebook that I was using at work today that refused to connect works fine for remote assistance when I bring it home. So I guess this must be a problem with our network configuration at work. I've checked that 3389 is open on firewall on office router and remote desktop works both ways.... just not remote assistance. I've read that remote assitance won't work if client and server are both behind Non-UPnP/NAT routers. If one has UPnP it's supposed to work. Office router doesn't have UPnP enabled but my home one does. I've also scoured the event logs on both ends, nothing noteworthy - unless I'm looking in the wrong spot). Note (copied from comment): I've just tried ShowMyPC which is based on VNC and it works, but I'd still like to figure out what's wrong with RA - it's just bugging me. The question is only about Remote Assistance, no need to propose solutions based on other programs.[/edit by Gnoupi]

  Read the article

• iptables captive portal remove user

  - by Burgos

  I followed this guide: http://aryo.info/labs/captive-portal-using-php-and-iptables.html I am implementing captive portal using iptables. I've setup web server and iptables on linux router, and everything is working as it should. I can allow user to access internet with sudo iptables -I internet -t mangle -m mac --mac-source USER_MAC_ADDRESS -j RETURN and I can remove access with sudo iptables -D internet -t mangle -m mac --mac-source USER_MAC_ADDRESS -j RETURN However, on removal, user can still open last viewed page as many times he wants (if he restart his Ethernet adapter, future connections will be closed). On blog page I found a script /usr/sbin/conntrack -L \ |grep $1 \ |grep ESTAB \ |grep 'dport=80' \ |awk \ "{ system(\"conntrack -D --orig-src $1 --orig-dst \" \ substr(\$6,5) \" -p tcp --orig-port-src \" substr(\$7,7) \" \ --orig-port-dst 80\"); }" Which should remove their "redirection" connection track, as it is written, but when I execute that script, nothing happens - user still have access to that page. When I execute /usr/sbin/conntrack -L | grep USER_IP after executing script I am having nothing returned, so my questions: Is there anything else that can help me clean these track? Obviously - I can't reset nor mine, nor users network adapter.

  Read the article

• Ubuntu 12.04 suddenly cannot connect to WPA2/WPA Personal protected connection. Windows 7 can

  - by d4ryl3

  I have a laptop with Windows 7 and Ubuntu 12.04. I have a Cisco E1200 and when I set it up, it created 2 SSIDs. Let's name them: MyConnection (WPA/WPA2 personal), and MyConnection-Guest (no authentication, guest password entered via web browser). I had no problem connecting to MyConnection before, either in Windows 7 and Ubuntu. But now, I can't access MyConnection on Ubuntu. It just says "connecting..." then disconnects after a while. But I'm able to access the internet (on Ubuntu) when I connect to MyConnection-Guest. MAC filtering is off (even if it's on its MAC address is in the white list). Any idea why I'm unable to connect to MyConnection in Ubuntu? Thanks. Update: My Ubuntu installation can connect to ANY WiFi connection (WPA/WEP/no auth), except for MyConnection. Update2: This is what "The not so easy way" returned: Initializing interface 'eth1' conf '/etc/wpa_supplicant.conf' driver 'default' ctrl_interface 'N/A' bridge 'N/A' Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf' Reading configuration file '/etc/wpa_supplicant.conf' Priority group 0 id=0 ssid='MyConnection' id=1 ssid='MyConnection' id=2 ssid='MyConnection' id=3 ssid='MyConnection' WEXT: cfg80211-based driver detected SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf capabilities: key_mgmt 0xf enc 0xf flags 0x0 netlink: Operstate: linkmode=1, operstate=5 Own MAC address: xx:xx:xx:xx:xx:xx wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=4 set_tx=0 seq_len=0 key_len=0 ioctl[SIOCSIWENCODEEXT]: Invalid argument Driver did not support SIOCSIWENCODEEXT wpa_driver_wext_set_key: alg=0 key_idx=5 set_tx=0 seq_len=0 key_len=0 ioctl[SIOCSIWENCODEEXT]: Invalid argument Driver did not support SIOCSIWENCODEEXT wpa_driver_wext_set_countermeasures RSN: flushing PMKID list in the driver Setting scan request: 0 sec 100000 usec WPS: UUID based on MAC address - hexdump(len=16): 16 3b d8 47 9e 24 50 89 96 16 6d 66 35 f3 58 37 EAPOL: SUPP_PAE entering state DISCONNECTED EAPOL: Supplicant port status: Unauthorized EAPOL: KEY_RX entering state NO_KEY_RECEIVE EAPOL: SUPP_BE entering state INITIALIZE EAP: EAP entering state DISABLED EAPOL: Supplicant port status: Unauthorized EAPOL: Supplicant port status: Unauthorized Added interface eth1

  Read the article

• SSD/HDD not exceeding 120 MB/s

  - by skiwi

  SO here is the situation: First this was my old PC, it had a 2x 1TB RAID 0 and a Corsair Force 3 SSD in it. This were the old speeds, measured by HDTune Pro. 2x 1TB RAID 0: Corsair Force 3 SSD Then my dad got my PC and we had several issues, in the end turned out both RAID and SSD controller were malfunctioning causing BlueScreens on 100% load. Removed the RAID 0, but leaving the HDD's intact and bought an Samsung 840 EVO 120GB, though the Corsair SSD is still in the system, just not as sytem disk anymore. 1TB HDD (one of them): Corsair SSD: Samsung SSD: We did not assemble the PC ourselves, so answering some technical questions might be more difficult, though we will do our best. First thing we noticed is that the Samsung 840 EVO is no where reaching it's advertised speed, even an Samsung 840 250GB (non-EVO) is reaching 350 MB/s in my own PC. Then we noticed that both SSD's are capped at 120 MB/s exactly, not sure if this is being caused by HDTune Pro, but very unlikely. And even worse, the Corsair Forza 3 was running faster before the system got reassembled. Does anyone have any clue what is going on?

  Read the article

• getent passwd fails, getent group works?

  - by slugman

  I've almost got my AD integration working completely on my OpenSUSE 12.1 server. I have a OpenSUSE 11.4 system successfully integrated into our AD environment. (Meaning, we use ldap to authenticate to AD directory via kerberos, so we can login to our *nix systems via AD users, using name service caching daemon to cache our passwords and groups). Also, important to note these systems are in our lan, ssl authentication is disabled. I am almost all the way there. Nss_ldap is finally authenticating with ldap server (as /var/log/messages shows), but right now, I have another problem: getent passwd & getent shadow fails (shows local accounts only), but getent group works! Getent group shows all my ad groups! I copied over the relavent configuration files from my working OpenSUSE 11.4 box: /etc/krb5.conf /etc/nsswitch.conf /etc/nscd.conf /etc/samba/smb.conf /etc/sssd/sssd.conf /etc/pam.d/common-session-pc /etc/pam.d/common-account-pc /etc/pam.d/common-auth-pc /etc/pam.d/common-password-pc I didn't modify anything between the two. I really don't think I need to modify anything, because getent passwd, getent shadow, and getent group all works fine on the OpenSUSE11.4 box. Attempting to restart nscd service unfortunately didn't do much, and niether did running /usr/sbin/nscd -i passwd. Do any of you admin-gurus have any suggestions? Honestly, I'm happy I made it this far. I'm almost there guys!

  Read the article

• Multi monitor setup with a tv as well?

  - by jasondavis

  I have always had a dual monitor setup for my pc's for years now. I am now in the market to build a new PC and get some new stuff. I need some help or advice on how to run 3 monitors WITH a 4th display which will be a lcd/plasma tv. So I am thinking I can get 2 video cards and that will give me all the hookups to run 3 monitors instead of 2. I will mount all 3 monitors in a row side by side and above them on the wall I would like to mount a larger 30-40+ inch lcd or plasma tv. I would then like to hook up my atelite/cable to this tv just as I would normally hook up a tv but I would like to also be able to have an option to view my PC o this tv as well. I know that is possible but would it be possible to view my PC on that tv and also still view my 3 other monitors and have the TV be a 4th display, where I could dock a different app/window in windows in all 4 displays (3 monitors + tv) ?? Please tell me any tips/advice on how to do this including what cables/software if any/converters/ you name it. Thanks for any help

  Read the article

• Packets being dropped by iptables

  - by Shadyabhi

  I am trying to create a Software Access Point in linux. I followed the blog here. Steps I performed: Started dhcp server on wlan0. Properly configured hostapd.conf Enabled packet forwarding & masquerading. Two commands executed regarding iptables: iptables --table nat --append POSTROUTING --out-interface eth0 -j MASQUERADE iptables --append FORWARD --in-interface wlan0 -j ACCEPT I enabled logging on iptables & I get this in everything.log Jun 29 19:42:03 MBP-archlinux kernel: [10480.180356] IN=eth0 OUT=wlan0 MAC=c8:bc:c8:9b:c4:3c:00:13:80:40:cd:80:08:00 SRC=195.143.92.150 DST=10.0.0.3 LEN=44 TOS=0x00 PREC=0x00 TTL=52 ID=38025 PROTO=TCP SPT=80 DPT=53570 WINDOW=46185 RES=0x00 ACK URGP=0 Jun 29 19:42:03 MBP-archlinux kernel: [10480.389102] IN=eth0 OUT=wlan0 MAC=c8:bc:c8:9b:c4:3c:00:13:80:40:cd:80:08:00 SRC=195.143.92.150 DST=10.0.0.3 LEN=308 TOS=0x00 PREC=0x00 TTL=52 ID=14732 PROTO=TCP SPT=80 DPT=53570 WINDOW=46185 RES=0x00 ACK PSH URGP=0 Jun 29 19:42:03 MBP-archlinux kernel: [10480.389710] IN=eth0 OUT=wlan0 MAC=c8:bc:c8:9b:c4:3c:00:13:80:40:cd:80:08:00 SRC=195.143.92.150 DST=10.0.0.3 LEN=44 TOS=0x00 PREC=0x00 TTL=52 ID=14988 PROTO=TCP SPT=80 DPT=53570 WINDOW=46185 RES=0x00 ACK FIN URGP=0 Jun 29 19:42:03 MBP-archlinux kernel: [10480.621118] IN=eth0 OUT=wlan0 MAC=c8:bc:c8:9b:c4:3c:00:13:80:40:cd:80:08:00 SRC=195.143.92.150 DST=10.0.0.3 LEN=44 TOS=0x00 PREC=0x00 TTL=52 ID=63378 PROTO=TCP SPT=80 DPT=53570 WINDOW=46185 RES=0x00 ACK FIN URGP=0 I have almost no knowledge of iptables, all I did was through googling. So, can anyone help me in making me understand what wrong is happening here? I have tried running tcpdump on wlan0 & http packets are being sent from wlan0.

  Read the article

• Partitioning & Linux

  - by Zac

  Every tutorial on Linux-based partitioning schemes (or, just partitioning in general) will tell you that a PC can have either 4 primary partitions, or 3 primaries and 1 extended. They will all also tell you that Linux (in my case, Ubuntu) can be installed on either. It's also come to my attention that it is not too atypical for FHS directories, such as usr/, tmp/, etc/, home/ or var/ to be mounted separately on other partitions. Several questions I am unable to find the answers to, purely for my own edification: (1) By "PC", are we really talking about common PC disk types, like IDE or SATA? I guess I'm wondering why PC uses are limited to 4 primaries or 3 primaries + 1 extended (2) I'm choking on some basic OS concepts: it is said that a partition can be mounted by a file system or an OS. So I assume this means I can somehow instruct Ubuntu to mount to 1 partition, and then any part of, say, ReiserFS, to be mounted to another partition? How? (3)(a) What about creating swap partitions? Is there too much of a good thing with swap partitioning? If I have 4GB RAM over 320GB disk, what should my swap partition size be, and why? (3)(b) Are swap files the only way to create swap partitions? Wouldn't a Linux partitioning utility allow me to define a partition as being for virtual memory only? (4) Why are partitions limited to being "mounted" by just OSes and file systems? Why couldn't I write a program to take up its own, say, 512 MB partition, and then have it invoked or uses by an OS installed on another partition? Thanks for shedding any light here... not critical that I know this stuff, but it's got me thinking incessantly. And when I think incessantly, I...can't......sleep....

  Read the article

• Performance decrease in every game and application

  - by Márk Vincze

  When I start a game, initially it runs smoothly, but after a couple of minutes, the performance gradually decreases to the point of being unplayable (1-2 FPS). The sound also starts to lag at this point. This does not happen every time I start my PC, usually exiting the game, rebooting, then starting the game again solves the problem, and I can play with perfect FPS for as long as I want. I could not find any deterministic reason when this happens and when doesn't. It happens in every game I tried (SWTOR, Diablo 3, Skyrim), and not even games, but simple applications like a browser or the Control Panel can get unusably slow. This is a brand new PC I bought three months ago, and this problem occurs since the first day I've been using it. Could you provide any advice how to further diagnose the problem? I tried to reinstall Windows, and tried different video card drivers, but it did not help. It would be important to know whether this is a hardware or software problem, because I can use the warranty if it is a hardware issue. (I did not want to return the PC yet, because I can't reproduce the issue deterministically.) Spec of the pc: Motherboard: ASROCK H61M-HVS CPU: INTEL Core i3-2120 3.30GHz 1155 BOX Memory: KINGMAX 4096MB DDR3 1333MHz KIT Video card: GIGABYTE GV-R685OC-1GD HD6850 1GB GDDR5 PCIE HDD: SEAGATE 500GB Barracuda 7200rpm 16MB SATA3 ST500DM002 I am using Windows 7 64 bit. Thanks a lot in advance!

  Read the article

• XP VM not detecting USB keyboard or mouse from Windows 7 host

  - by Ian Kemp

  I've been using a Windows XP Pro VM (32-bit, SP3) for months on my work PC (Windows 7 64-bit) with no problems, with a PS/2 keyboard and a standard optical USB mouse. Today I copied this VM onto my home PC, which is also Windows 7 64-bit but with a G15 USB keyboard and MX518 USB mouse. For some reason the VM does not accept input from the keyboard or mouse, which makes it almost impossible to use. (Unity works but is not an option). Both my home and work PC are running VMware player 3.1.0. My keyboard and mouse show up as USB devices in the bottom-right of the VMware Player window, and if I click them I have the standard option to "Connect (Disconnect from host)". I have selected this option for the keyboard, and then the VM happily accepts keyboard input, but of course my host PC no longer does. It seems like VMware is seeing my keyboard and mouse as USB devices and not input devices. I've tried sending the keyboard input to the guest and reinstalling VMware Tools, but that achieved nothing. I'm certain it's a problem with the VM, and not the XP install, as I also can't use F12 to enter the VMware BIOS when the VM is powering up.

  Read the article

• rdp allow client reconnect without password prompt after several hours

  - by Tom

  Let me describe the setup first: client PC with several rdp sessions to local servers, all opened from saved rdp sessions with stored passwords, using the standard windows rdp client. several windows servers on the LAN, with varying server OS: windows server 2003, 2008, and even 2012 now. When I log onto my PC I open up rdp sessions to all those servers, and keep them open all the time for various reasons. Overnight the client PC is put into sleep or hibernate mode, thereby braking the rdp connections. On the next day when I wake the client PC and login again, the rdp sessions automatically try to reconnect to the servers, and this leads to the question: starting with server 2008 something apparently changed in the rdp server config, as all servers with 2008, 2008r2 and 2012 will prompt for the password in the rdp session, whereas the 2003 server rdp connections will re-establish without the password prompt. Apparently there is a timeout setting on 2008+ that, when exceeded, requires a reauthentication. Is there any way to setup the 2008+ servers to behave like 2003 did? I'd like the rdp sessions to reconnect without a password prompt even after a several hour disconnect.

  Read the article

• Gaming blew fuse: how to overcome?

  - by George Tomlinson

  I've been gaming for a while now. When playing certain games this PC goes into overdrive. The fan/fans start/s to sound like a jet engine it/they get/s so busy. Also I have smelt burning when this has happened. The fuse blew on the 4 socket adapter I was using recently. On the following thread someone said this could be due to the PSU not being strong enough to handle the load, in what it seems could be a related issue someone had, although the person who posted this question did say that blowing a fan on their PC stopped it crashing in that case: http://www.tomshardware.co.uk/answers/id-2047543/gtx-650-overheating-issue.html. This is exactly what they said: Your GPU isn't overheating. 70+ before it would shutdown and cause a restart. Make sure your PSU is strong enough to handle your new system at load and possibly run Memtest to check your RAM (although not BSOD'ing and just shutting down points to the PSU). This (the PSU part) makes more sense to me than it being to do with dust etc, since it seems a more plausible explanation of why the fuse blew. The PC has no problems except when playing certain games: i.e. TERA Rising and WoW with add-ons (I think WoW is ok as long as I don't have more than 1 add-on (Healers Have To Die)). I'm just wondering if anyone knows or can suggest what I might be able to do to be able to play these games without this problem occurring. The PC's spec is this: Display: NVIDIA GeForce GTX 650 8GB RAM (6 available) Processor: AMD FX (tm) - 8120 Eight-Core Processor - 3.1 GHz, 4 Cores, 8 Logical Processors I have read on another post that forcing vsync in the Nvidia Control Panel helped with what seems could be a similar problem, so I plan to see if that solves it, God permitting.

  Read the article

< Previous Page | 420 421 422 423 424 425 426 427 428 429 430 431  | Next Page >