Search Results

Search found 18775 results on 751 pages for 'old hardware'.

Page 425/751 | < Previous Page | 421 422 423 424 425 426 427 428 429 430 431 432  | Next Page >

  • SAS disk performance drops a while after reboot.

    - by Flamewires
    So we have some workstations with identical hardware. The Fedora14 box has a couple weeks uptime and still get good performance. hdparm -tT /dev/sda /dev/sda: Timing cached reads: 21766 MB in 2.00 seconds = 10902.12 MB/sec Timing buffered disk reads: 586 MB in 3.00 seconds = 195.20 MB/sec The Cent 5.5 boxes however seem to be okay after a reboot, /dev/sda: Timing cached reads: 34636 MB in 2.00 seconds = 17354.64 MB/sec Timing buffered disk reads: 498 MB in 3.01 seconds = 165.62 MB/sec but some time later( unsure exactly, tested at approx 1 day uptime) /dev/sda: Timing cached reads: 2132 MB in 2.00 seconds = 1064.96 MB/sec Timing buffered disk reads: 160 MB in 3.01 seconds = 53.16 MB/sec drop to this. This is with very low load. I believe they all have the same bios settings. Any ideas what could cause this on Cent? Ask for more info. It might also be worth noting, that passing the --direct flag causes the slow boxes to perform similarly to the non-slow ones for buffered disk reads.

    Read the article

  • Cisco redundancy modes

    - by user974896
    I am using a Cisco 6500 series with an SSO redundancy configuration. The show redundancy output is as follows: Hardware Mode = Duplex Configured Redundancy Mode = sso Operating Redundancy Mode = rpr Maintenance Mode = Disabled Communications = Up I would assume the device is operating in RPR mode although SSO is configured. What could cause this? Shouldn't the operating mode be SSO? EDIT (show redundancy states): my state = 13 -ACTIVE peer state = 4 -STANDBY COLD Mode = Duplex Unit = Primary Unit ID = 5 Redundancy Mode (Operational) = rpr Redundancy Mode (Configured) = sso Redundancy State = rpr Split Mode = Disabled Manual Swact = Enabled Communications = Up client count = 60 client_notification_TMR = 30000 milliseconds keep_alive TMR = 9000 milliseconds keep_alive count = 1 keep_alive threshold = 18 RF debug mask = 0x0

    Read the article

  • Converting an ancient RH8 system to VMware ESXi

    - by donatello
    I am curious to know what options I have to convert a very old RedHat8 machine to a virtual one on ESXi. Looking at VMware Converter it seems there's an option to login to the RH8 using SSH, and from there it will convert to the ESXi-server. That makes me a bit nervous though, exactly what is happening there? The RH8 machine is slightly critical, and if anything messes up it'll likely result in many hours extra work. :( Another option I thought of was to boot a LiveCD on RH8-system and create a raw "dd dump" of the disk. The similar method is used to restore the image, I boot a LiveCD on the VM in ESXi and use "dd" to write it to disk. Is there any other option I could use? I'm using the cheap version of ESXi, hence I have no access to the Converter BootCD so these rather cumbersome methods is the only I can think of. :)

    Read the article

  • Windows 8 Start Screen: Show programs in order of most frequently used

    - by Johnny W
    For me the Windows 8 Start Screen is just a great bit version of the old Start Menu, but unlike the Start Menu, it doesn't seem to order programs by frequency of use? Consider the following: While I DO use Chrome, Steam, and iTunes a lot. I've never ran Adobe Media Encoder, nor Adobe Extension Manager, nor Acrobat Distiller, or indeed most of the things on that list! Or there a way to change sorting to most frequently clicked on? Or perhaps even create FOLDERS in which to group items (e.g. "Adobe Apps" or "Games" or "Microsoft Office"?). Dragging them one at a time takes an age!

    Read the article

  • FeedValidator & Feedburner get 404 when accessing wordpress RSS feeds when permalinks are enabled.

    - by Wazbaur
    I'm helping a friend set up a self-hosted Wordpress blog + feedburner and I'm seeing a problem with the feeds that I'm finding somewhat mysterious. Using the default permalink structure (e.g., ?p=123) everything works as expected; I can follow the feed in Google reader, navigate to it manually, and set it up in feedburner. However, once I switch away from the default permalink structure, feedburner and feedvalidator both report that accessing the feed is returning HTTP-404 and Google reader no longer shows new posts (I'm assuming for the same reason), but I can navigate to the feed using a browser. When I do that it appears as though nothing is wrong; there is a feed there and it contains all the posts I expect it to have. I've re-started the feedburner & reader set-up from the beginning after changing the link structure, so I don't think they're doing anything silly like looking at the feed at its old address. I've seen people with similar problems in various other places but there doesn't seem to be a good answer anywhere.

    Read the article

  • Install wireless router with cable modem - need authentication server?

    - by Paul
    I've bought a wireless router which I'm installing with a Telstra BigPond cable modem for a friend. As part of the setup I've got to a screen requesting username / password / authentication server for the cable modem They have contacted Telstra who supply the username / password and say that is all they need. They dont know anything about an authentication server. There are a couple of answers up on Whirlpool forum found through google but those answers are 4 years old. http://forums.whirlpool.net.au/forum-replies-archive.cfm/475258.html http://forums.whirlpool.net.au/forum-replies-archive.cfm/479615.html I havent tried them yet as I hoped to get actual answers before trundling over to my friends house again. Can anyone suggest, How to get information from Telstra support? (I realise this question maybe impossible to answer) What is the authentication server for Telstra BigPond for a user in Sydney Australia Are those whirlpool forum answers still valid? I guess if I dont get anything more here I'll try what it says on whirlpool and see what happens.

    Read the article

  • What's the difference between a normal ActiveX killbit update and one for IDX?

    - by Bob
    I'm looking back at some old MS security bulletin for distribution to new clients and when I look at downloads for the last set of MS ActiveX killbits, KB article here, under each platform I see links with the term IDX. For instance there will be an entry that says "For Windows 7 for 32-bit versions" and then one a few rows down that says "For Windows 7 IDX for 32-bit versions". What's the difference between the two? I understand from a little digging that idx is one of the field names for the database that ActiveX controls are stored in, but that's not really helpful.

    Read the article

  • How to set up a PC which can be booted from Linux AND Windows?

    - by Martin
    Our PC was running Windows XP up to know. It has become incredibly slow and I'm considering switching to Linux (Ubuntu?!) as a fresh OS. However, there are some applications we rarely use which run only on Windows and I also want to have the possibility to easily go back to the old system, if I should find during testing linux, that anything is missing or not available. So the idea is to install Linux on a new (second) hard drive and use the existing Windows XP from a virtual machine (converted by Paragon Drive Backup) in the transition time. We have a lot of data on the PC, tens of GBs of Photos (managed by Picasa), ... My questions: What could be the best way to setup the new hard drive? (Partitions) I assume that I can not access the Linux data from Windows but I could access (read/write) windows drives from Linux? Does anyone know good tutorials for this use case? What other things might I have to consider for transition Windows-Linux?

    Read the article

  • Which SATA controller is better to use with Windows Server 2008 R2 64 bit?

    - by at8eqeq3
    We're preforming some hardware upgrade on our server machines. As a part of this process, we have to install some additional disk drives. Unfortunately, total number of drives will become 7 or 8, while all of our motherboards have only 6 SATA ports. Obviously, we need additional disk controllers. For now, we've tested Silicon Image (actually, no-name) and Adaptec controllers, both on SiI3132 chip, and got some problems with drivers for them: Silicon Image drivers are not installing at all, and Adaptec ones are installing, but the system says they're not signed and becomes unbootable. We're tryed both drivers from controllers' CD's and latest versions from manufacturers' websites, and no luck. So, can you recommend some SATA controllers that will really work without tambourine dances on mentioned OS (we need just 2 SATA ports and PCI-E, while RAID and any other features are no-matter)? Thanks for any help.

    Read the article

  • How to resize the disk of a Fedora guest VM in VMWare ESXi

    - by Cerin
    How do I resize (specifically increase) the disk size of a Fedora guest VM running under VMWare ESXi 4.1? I have a Fedora 16 VM with an ext4 formatted disk, and I've increased its disk size using the vSphere client from 50GB to about 250GB. I rebooted the guest, and it correctly shows this size using fdisk -l /dev/sda. However, df -H still shows the old size. I've found a few KB articles explaining how to resize partitions for some flavors of Linux, but nothing for Fedora with ext4. That article seems to imply I have to create a completely new partition, and that I can't simply expand the existing partition. Using Gparted, it also prevents me from simply resizing the existing partition. Is this impossible to do under Linux?

    Read the article

  • Certain drives in RAID 5 set intermittently are not recognized

    - by hydroparadise
    I have a curious problem in that 1 (sometimes 2) drives do not get recognized in a RAID 5 set. The server is getting rather old at 5 to 6 years, but still seems to function well once the machine sees all drives. So that leaves me with three areas to consider: the motherboard, the SATA RAID card, or the individual hard drives themselves. I am leaning toward the RAID card, but have not had much dealings with RAID cards. What would cause individual drives not to be recognized in the set? If it was the card, I would think that it would be all or nothing. If it were a single drive, is it possible that it would only work sometimes? The only other thing to consider is that that they are different drives (Seagate and Western Digital) but all around 80 GB. SATA RAID controller is 3ware Escalade 8506-4LP Motherboard is a SuperMicro P4SPA+ Am open and available for more details if needed...

    Read the article

  • Which method of SQL Server 2005 or 2008 Replication is best for ease of field changes?

    - by Rick
    We need 15 minute warm updates from one SQL Server to another. Log Shipping looks good and appears easy to setup. We are also looking into Transactional Replication. The data only needs to copy one way. We have two main requirements: 1) The destination database needs to be a max 15 minute old copy of the source. It needs to re-try and get up-to-date if a network cable is unplugged for a while. 2) We would really like table (fields added or modified) changes in the source as easy as possible. Thanks in advance for all suggestions.

    Read the article

  • Why such a dramatic difference in wireless router max. simultaneous connections?

    - by Jez
    Recently, I've needed to look into buying a wireless router for a mission-critical system at work that will need to support quite a few simultaneous connections (potentially a few hundred laptops). One thing I've noticed is that there seems to be a dramatic difference between the max. simultaneous connections different routers can support; see this page for example - anything from 32 to 35,000! Why is there this degree of difference? You'd have thought that if we know how to make routers that can handle thousands of connections, we wouldn't be making stuff that's limited to a pathetic 32 anymore. Is it a firmware thing? A hardware thing? Are low-end manufacturers purposely putting low arbitrary connection limits in so people can be "encouraged" to pay more for high-end routers?

    Read the article

  • How can I combine non-identical disks efficiently?

    - by Odys
    There are some not-identical disk of various capacities that I want to combine (somehow). Since there are no duplicate models, I can't use raid between none of them. Is there a way to use them efficiently while being safe? What I have in mind is a software that will use them as if it were Raid-5 or something. I really don't care about max speed. I want in the end to have as less logical drives as possible. Also, I don't mind spending some money on hardware, if needed.

    Read the article

  • Is there a limit on the number of USB external drives?

    - by Beska
    I've got three external HDDs, all My Books, 500 GB, 750 GB, and 1 TB. If I hook one or two of them up to a computer, everything seems fine. If I hook all three of them to a computer (I've tried this on two different computers, one running Windows XP, one running Windows Vista), the bootup time goes up by more than an order of magnitude. It can suddenly take about 10-20 minutes to boot the machine, whereas before it might take a minute. All three drives work fine on their own. I'm not using any kind of hub; all three are plugged directly into the machine. Is this associated with some kind of inherent limit in USB? Is this bad hardware design in the CPU box? Is this a My Book problem?

    Read the article

  • Transfer Raid Drives to External Enclosure

    - by dubbeat
    I have 2 raid disks (a grand total of 360GB) in my laptop. I'm fast running out of space and want to install new drives. I've a pretty good idea how to do this. My question is what can I do with the drives that I remove? I've got lots of media files on these drives that I'd like to keep and maybe transfer back onto my laptop once I have the new drives installed. Bearing in mind that I know next to nothing about hardware how do you suggegst I go about reusing the removed drives somehow? Thanks,

    Read the article

  • Transferring DHCP using Windows Server Migration Tool - Why is Powershell is crashing on the import of the .mig file?

    - by Mike
    I am migrating DHCP from a windows server 2003R2 DC to a Windows Server 2008R2 DC I've followed this video and its predecessor (Installing Windows Server Migration Tools) http://technet.microsoft.com/en-us/video/migrating-dhcp-using-the-windows-server-2008-r2-migration-tools.aspx I went through everything smoothly until the last step. I have exported a .mig file with my DHCP configuration on the old 2003r2 server. I transferred this .mig file over to my 2008R2 server, when running the import command, it will appear to work for a minute or two and then I get a generic windows "Powershell has stopped working" error and I have to close the program. Under the problem details I see the following: FileVersionOfSystemManagementAutomation: 6.1.7600.16385 InnermostExceptionType: System.AccessViolationException OutermostExceptionType: System.AccessViolationException DeepestPowerShellFrame: unknown OS Version: 6.1.7600.2.0.0.272.7 LocaleID: 1033 Seems like there are permissions issues maybe? I am running powershell as an admin and am logged in to the server as a domain administrator. Any Ideas? Thanks

    Read the article

  • HP Officejet 7410 AIO: Scanning/copying output is a solid black field

    - by William
    I recently tried to breathe some life back into an old Officejet 7410 for my parents. The printing is fine, but the scanning and the copying respectively produce images and copies that are mostly solid black, except for the first inch or so from the top of the original page. At first I thought this was a bulb problem, so I replaced it. Unfortunately, the problematic behavior is still there. I've tried resetting to factory defaults. Still no improvement. I don't think this is related to my OS or drivers, since the copying is also affected even when the connected computer is powered off. So... my question(s): What is the cause of this bad behavior? Given that, can my Officejet be repaired? If so, how? Thanks in advance.

    Read the article

  • pyexiv2 build error src/exiv2wrapper.hpp:32:29: error: exiv2/preview.hpp: No such file or directory

    - by Jake
    The other day I used apt-get install python-pyexiv2 on my ubuntu server, but it seems to have given me an old version. It's not compatible with the code I wrote in my local development environment so I'd like to update it. I downloaded the latest tar.gz from the website, extracted it and ran scons as per the readme. But it will not build, I get the error src/exiv2wrapper.hpp:32:29: error: exiv2/preview.hpp: No such file or directory I've also user apt-get to install libboost-python-dev and libexiv2-dev Can anyone help me on this?

    Read the article

  • Transferring filesystem-structured music collection to ipod

    - by ansgri
    I have a rather large music collection organized like music/<artist>/<album>/<track>-<title>.<fmt>, mostly mp3. However, the tagging is rather inconsistent, as on the PC or with better old players (Cowon D2+) I don't care and use the filesystem view. However, in the iTunes this all gets messed up because it doesn't care about file locations and looks at tags. What's worse though, it consistently splits compilations into single-track artist-albums. So, is there a way to take the existing filesystem artist-album structure and bring it to the form compatible with iTunes/iPod? Again, I don't care about tags. Automated approach is most welcome, but at least please direct me to some document specifying all the little details about iTunes' metadata requirement for compilations.

    Read the article

  • iTunes want to remove my existing apps on iPad

    - by Pablo
    Here is the situation. I connected my iPad to some new PC, Synced, then ticking Sync Apps from Devices-Apps will give me warning that all existing apps on my iPad will be replaced with those from Library-Apps. But in Library I have just couple old apps, which long time ago I used. So how I can sync the library in iTunes with my existing apps from iPad? EDIT: I have tried to click on Transfer Purchases, but not all of the items went to the library, just few of them.

    Read the article

  • Rsync over ssh with root access on both sides

    - by Tim Abell
    Hi, I have one older ubuntu server, and one newer debian server and I am migrating data from the old one to the new one. I want to use rsync to transfer data across to make final migration easier and quicker than the equivalent tar/scp/untar process. As an example, I want to sync the home folders one at a time to the new server. This requires root access at both ends as not all files at the source side are world readable and the destination has to be written with correct permissions into /home. I can't figure out how to give rsync root access on both sides. I've seen a few related questions, but none quite match what I'm trying to do. I have sudo set up and working on both servers.

    Read the article

  • How to clean this Dell Precision M6400

    - by Daniel Pratt
    I have (well, ok, my employer has and I use) a Dell Precision M6400 notebook. It's a decent piece of hardware, but I have at least one major gripe: It's a dust and...uh...crumb (I repent! I repent!) magnet! And I cannot seem to exorcise the dust/crumbs from it! There is a strip of metal above the keyboard that is punched full of tiny holes. Well, maybe it's better to describe them as 'pits'. If a sufficiently small particle finds its way into one of those pits, there is only about a 50% that I will manage to get it out. Consequently, there is now a chorus of tiny little particles silently chiding me about eating cookies a cracker whilst I browse the intarwebs. Does anyone have any suggestions about how I could remove these particles from this machine...while still preserving the function of the machine?

    Read the article

  • Apt Stalls When Using HTTP Sources

    - by UltraNurd
    I was getting some to me inexplicable behavior from apt-get/aptitude on an admittedly crusty old webserver. While it was otherwise running fine, as soon as I tried a package upgrade, after a downloading a few updates it would stall completely, then my SSH session hung (and I was unable to reconnect), thus requiring a hard restart. First, I switched to a different package source in /etc/apt/sources.list, but still got the same behavior. At this point I was assuming the NIC was dying in some weird way... but as soon as I changed the package source to use FTP instead of HTTP, everything worked fine, and I was able to upgrade. For now I'm not too concerned since I have an easy work around, but it implies that there's something very weird with my network setup, since it seems to be protocol (or port?) specific. I didn't think any of my NAT setup would affect outbound traffic, but I could be crazy. Any ideas what I should try to look for?

    Read the article

  • Need help upgrading MacBookPro3,1 RAM to 4GB.

    - by Fantomas
    My questions are: 1) Where to buy it and what to buy? I have heard that this RAM is generic enough and it does not have to come from Apple. 2) Can I reuse my existing stick(s)? Would I have a single 2GB module, or 2 x 1GB modules? 3) If I have 2GB already, is it a good idea to have one old stick and one new one? Which one is better placed at the top and which one at the bottom? Let me know what questions you have. My computer's info: Hardware Overview: Model Name: MacBook Pro Model Identifier: MacBookPro3,1 Processor Name: Intel Core 2 Duo Processor Speed: 2.4 GHz Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache: 4 MB Memory: 2 GB Bus Speed: 800 MHz Boot ROM Version: MBP31.0070.B07 SMC Version (system): 1.16f11

    Read the article

< Previous Page | 421 422 423 424 425 426 427 428 429 430 431 432  | Next Page >