Search Results

Search found 12423 results on 497 pages for 'dynamic controls'.

Page 426/497 | < Previous Page | 422 423 424 425 426 427 428 429 430 431 432 433  | Next Page >

  • Rails emails not sending in staging environment

    - by jrdioko
    In a Rails application I set up a new staging environment with the following parameters in its environments/ file: config.action_mailer.perform_deliveries = true config.action_mailer.raise_delivery_errors = true config.action_mailer.delivery_method = :smtp However, when the system generates an email, it gets printed to the staging.log file instead of being sent. My SMTP settings work fine in other environments. What configuration am I missing to get the emails to actually send? Edit: Yes, the staging box is set up with valid configuration for an SMTP server it has access to. It seems like the problem isn't with the SMTP settings (if it was, wouldn't I get errors in the logs?), but with the Rails configuration. The application is still redirecting emails to the log file (saying "Sent mail: ...") as opposed to actually going through SMTP. Edit #2: It looks like the emails actually have been sending correctly, they just happen to print to the log as well. I'm trying to use the sanitize_email gem to redirect the mail to another address, and that doesn't seem to be working, which is why I thought the emails weren't going out. So I think that solves my problem, although I'm still curious what in ActionMailer's settings controls whether emails are sent, logged to the log file, or both. Edit #3: The problem with sanitize_email boiled down to me needing to add the new staging environment to ActionMailer::Base.local_environments. I'll keep this question open to see if anyone can answer my last question (what determines whether ActionMailer's emails get sent out, logged to the log file, or both?)

    Read the article

  • I'm trying to install psycopg2 onto Mac OS 10.6.3; it claims it can't find "stdarg.h" but I can see

    - by cojadate
    I'm desperately trying to successfully install psycopg2 but keep running into errors. The latest one seems to involve it not being to find "stdarg.h" (see code below). However I can see with my own eyes that a file called stdarg.h exists at /Developer/SDKs/MacOSX10.4u.sdk/usr/include/stdarg.h (where it claims it can't find anything) so I've no idea what to do about it. I'm running Mac OS 10.6.3 and within the last few days I've made sure I have all the latest OS developer tools. I have Python 2.6.2 and PostgreSQL 8.4 if that makes any difference. python setup.py install running install running build running build_py running build_ext building 'psycopg2._psycopg' extension creating build/temp.macosx-10.3-fat-2.6 creating build/temp.macosx-10.3-fat-2.6/psycopg gcc -arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.4u.sdk -fno-strict-aliasing -fno-common -dynamic -DNDEBUG -g -O3 -DPSYCOPG_DEFAULT_PYDATETIME=1 -DPSYCOPG_VERSION="2.2.1 (dt dec ext pq3)" -DPG_VERSION_HEX=0x080404 -DPSYCOPG_EXTENSIONS=1 -DPSYCOPG_NEW_BOOLEAN=1 -DHAVE_PQFREEMEM=1 -DHAVE_PQPROTOCOL3=1 -I/Library/Frameworks/Python.framework/Versions/2.6/include/python2.6 -I. -I/opt/local/include/postgresql84 -I/opt/local/include/postgresql84/server -c psycopg/psycopgmodule.c -o build/temp.macosx-10.3-fat-2.6/psycopg/psycopgmodule.o In file included from /Library/Frameworks/Python.framework/Versions/2.6/include/python2.6/unicodeobject.h:4, from /Library/Frameworks/Python.framework/Versions/2.6/include/python2.6/Python.h:85, from psycopg/psycopgmodule.c:27: /Developer/SDKs/MacOSX10.4u.sdk/usr/include/stdarg.h:4:25: error: stdarg.h: No such file or directory In file included from /Library/Frameworks/Python.framework/Versions/2.6/include/python2.6/unicodeobject.h:4, from /Library/Frameworks/Python.framework/Versions/2.6/include/python2.6/Python.h:85, from psycopg/psycopgmodule.c:27: /Developer/SDKs/MacOSX10.4u.sdk/usr/include/stdarg.h:4:25: error: stdarg.h: No such file or directory lipo: can't figure out the architecture type of: /var/folders/MQ/MQ-tWOWWG+izzuZCrAJpzk+++TI/-Tmp-//ccakFhRS.out error: command 'gcc' failed with exit status

    Read the article

  • 2 Mutually exclusive RadioButton "Lists"

    - by user72603
    I think this has to be THE most frustrating thing I've ever done in web forms. Yet one would think it would be the easiest of all things in the world to do. That is this: I need 2 separate lists of radiobuttons on my .aspx page. One set allows a customer to select an option. The other set does also but for a different purpose. But only one set can have a selected radiobutton. Ok I've tried this using 2 asp.net Radiobuttonlists controls on the same page. Got around the nasty bug with GroupName (asp.net assigns the control's uniqueID which prevents the groupname from ever working because now, 2 radiobuttonlists can't have the same groupname for all their radiobuttons because each radiobuttonlist has a different uniqueID thus the bug assigns the unique ID as the name attribute when the buttons are rendered. since the name sets are different, they are not mutually exclusive). Anyway, so I created that custom RadioButtonListcontrol and fixed that groupname problem. But when ended up happening is when I went to put 2 instances of my new custom radiobuttonlist control on my .aspx page, all was swell until I noticed that every time I checked for radiobuttonlist1.SelectedValue or radiobuttonlist2.SelectedValue (did not matter which I was checking) the value always spit back string.empty and i was not able to figure out why (see http://forums.asp.net/t/1401117.aspx). Ok onto the third try tonight and into the break of dawn (no sleep). I tried to instead just scrap trying to use 2 custom radiobuttonlists altogether because of that string.empty issue and try to spit out 2 sets of radiobuttonlists via using 2 asp.net repeaters and a standard input HTML tag inside. Got that working. Ok but the 2 lists still are not mutually exclusive. I can select a value in the first set of radiobuttons from repeater1 and same goes for repeater2. I cannot for the life of me get the "sets" to be mutually exclusive sets of radiobuttons.

    Read the article

  • Getting Started with Ruby & Ruby on Rails

    - by JakeTheSnake
    Some background: I'm a jack-of-all traits, one of which is programming. I learned VB6 through Excel and PHP for creating websites and so far it's worked out just fine for me. I'm not CS major or even mathematically inclined - logic is what interests me. Current status: I'm willing to learn new and more powerful languages; my first foray into such a route is learning Ruby. I went to the main Ruby website and did the interactive intro. (by the way, I'm currently getting redirected to google.com when I try the link...it's happening to other websites as well...is my computer infected?) I liked what I learned and wanted to get started using Ruby to create websites. I downloaded InstantRails and installed it; everything so far has been fine - the program starts up just fine, and I can test some Ruby code in the console. However my troubles begin when I try and view a web page with Ruby code present. Lastly, my problem: As in PHP, I can browse to the .php file directly and through using PHP tags and some simple 'echo' statements I can be on my way in making dynamic web pages. However with the InstantRails app working, accessing a .rb or .rhtml page doesn't produce similar results. I made a simple text file named 'test.rb' and put basic HTML tags in there (html, head, body) and the Ruby tags <%= and % with some ruby code inside. The web page actually shows the tags and the code - as if it's all just plain HTML. I take it Ruby isn't parsing the page before it is displayed to the user, but this is where my lack of understanding of the Ruby environment stops me short. Where do I go from here?

    Read the article

  • Iframe in Tab Madness!

    - by 404error
    I've searched all over and have found possible solutions but they don't quite work how i need them to. I am really new to jQuery but I'm trying :-) I have an iframe that sits in a Tab ( Tabs powered by jQuery) In the third tab sits an iframe that holds a slideshow My problem: When I click on the third tab which houses the iframe all the controls appear, the carousel seems to be working, but ...no pictures!!! Firefox helped me find what fixes the problem, now i just need to find a way to do fix it. In Firefox when i right click on the iframe and go to This frame - Reload Frame VOILA! Pictures are back! Question: Is it possible with jQuery to tell when the third tab is selected and to refresh a div which contains the iframe when that third tab is selected? Tab Code: <script type="text/javascript" charset="utf-8"> $(function () { var tabContainers = $('div.tabs > div'); tabContainers.hide().filter(':first').show(); $('div.tabs ul.tabNavigation a').click(function () { tabContainers.hide(); tabContainers.filter(this.hash).show(); $('div.tabs ul.tabNavigation a').removeClass('selected'); $(this).addClass('selected'); return false; }).filter(':first').click(); }); </script> Test page can be found here: http://artitechture.com/blah/tabs.html Any help would be appreciated...I want to learn!

    Read the article

  • Why is setting HTML5's CanvasPixelArray values is ridiculously slow and how can I do it faster?

    - by Nixuz
    I am trying to do some dynamic visual effects using the HTML 5 canvas' pixel manipulation, but I am running into a problem where setting pixels in the CanvasPixelArray is ridiculously slow. For example if I have code like: imageData = ctx.getImageData(0, 0, 500, 500); for (var i = 0; i < imageData.length; i += 4){ imageData.data[index] = buffer[i]; imageData.data[index + 1] = buffer[i]; imageData.data[index + 2] = buffer[i]; } ctx.putImageData(imageData, 0, 0); Profiling with Chrome reveals, it runs 44% slower than the following code where CanvasPixelArray is not used. tempArray = new Array(500 * 500 * 4); imageData = ctx.getImageData(0, 0, 500, 500); for (var i = 0; i < imageData.length; i += 4){ tempArray[index] = buffer[i]; tempArray[index + 1] = buffer[i]; tempArray[index + 2] = buffer[i]; } ctx.putImageData(imageData, 0, 0); My guess is that the reason for this slowdown is due to the conversion between the Javascript doubles and the internal unsigned 8bit integers, used by the CanvasPixelArray. Is this guess correct? Is there anyway to reduce the time spent setting values in the CanvasPixelArray?

    Read the article

  • Why can't I define a case-insensitve Dictionary in C#?

    - by Edward Tanguay
    This WPF code: using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Windows; using System.Windows.Controls; using System.Windows.Data; using System.Windows.Documents; using System.Windows.Input; using System.Windows.Media; using System.Windows.Media.Imaging; using System.Windows.Navigation; using System.Windows.Shapes; namespace TestDict28342343 { public partial class Window1 : Window { public Window1() { InitializeComponent(); Dictionary<string, string> variableNamesAndValues = new Dictionary<string, string>(StringComparison.InvariantCultureIgnoreCase); } } } gives me the error: The best overloaded method match for 'System.Collections.Generic.Dictionary.Dictionary(System.Collections.Generic.IDictionary)' has some invalid arguments Yet I find this code example everywhere such as here and here. How can I define a Dictionary whose keys are case-insensitve?

    Read the article

  • Need Help with wxPython & pyGame

    - by Xavier
    Hi Guys, I'm actually in need of your help and advice here on my assignment that I am working on. First of all, I was task to do a program that runs langton's ant simulation. For that, I've managed to get the source code (from snippets.dzone.com/posts/show/5143) and edited it accordingly to my requirements. This was done and ran in pygame module extension. In addition, my task requires a GUI to interface for users to run and navigate through the screens effectively with the langton's ant program running. I used wxPython with the help of an IDE called BOA constructor to create the frames, buttons, textboxes, etc. Basically, all the stuff needed in the interfaces. However, I've ran into some problems listed below: Found problem integrating pyGame with wxPython. On this note, I've research the internet for answers and tutorials where I found out from website: wiki.wxpython.org/IntegratingPyGame & aspn.activestate.com/ASPN/Mail/Message/wxpython-users/3178042. I understand from the sites that integrating pyGame with wxPython will be a difficult task where it has caused common problems like the inability to placing other controls into the frames as the pyGame application will cover the entire panel. I really hope that you can clarify my doubts on this and advise me on the path that I should take from here. Therefore, I ask the following questions: Is it feasible to integrate pyGame with wxPython? If it is not feasible to integrate pyGame with wxPython, what other alternatives do I have to create a GUI interface integrating pyGame into it. If so how do I go about? If it is possible to go about integrating pyGame with wxPython, how do I go about doing so? Really need you guys opinion on this.

    Read the article

  • Trim characters from RSS feed

    - by egr103
    I'm calling in a RSS feed to my website using PHP. Currently my code below is calling in the entire contents for pubDate: <pubDate>Thu, 12 Sep 2013 07:23:59 +0000</pubDate> How do I just display the day and month from the above example i.e. 12 Sep? EDIT I should clarify, the above line of code is an example output I currently get but as I'm calling the latest 3 posts from an RSS feed, this date and time will vary. I therefore need the code to be more dynamic (if that's the right term!) This code is my full code that fetches the contents of an RSS feed: <?php $counter = 0; $xml=simplexml_load_file("http://tutorial.world.edu/feed/"); foreach ($xml->channel->item as $item) { $title = (string) $item->title; // Title Post $link = (string) $item->link; // Url Link $pubDate = (string) $item->pubDate; // date $description = (string) $item->description; //Description Post echo '<div class="display-rss-feed"><a href="'.$link.'" target="_blank" title="" >'.$title.' </a><br/><br/>'; echo $description.'<hr><p style="background-color:#e4f;">'.$pubDate.'</p></div>'; if($counter == 2 ) { break; } else { $counter++; } } ?>

    Read the article

  • How do I simulate the usage of a sequence of web pages?

    - by Rory Becker
    I have a simple sequence of web pages written in ASP.Net 3.5 SP1. Page1 - A Logon Form.... txtUsername, txtPassword and cmdLogon Page2 - A Menu (created using DevExpress ASP.Net controls) Page3 - The page redirected to by the server in the event that the user picks the right menu option in Page2 I would like to create a threaded program to simulate many users trying to use this sequence of pages. I have managed to create a host Winforms app which Launches a new thread for each "User" I have further managed to work out the basics of WebRequest enough to perform a request which retrieves the Logon page itself. Dim Request As HttpWebRequest = TryCast(WebRequest.Create("http://MyURL/Logon.aspx"), HttpWebRequest) Dim Response As HttpWebResponse = TryCast(Request.GetResponse(), HttpWebResponse) Dim ResponseStream As StreamReader = New StreamReader(Response.GetResponseStream(), Encoding.GetEncoding(1252)) Dim HTMLResponse As String = ResponseStream.ReadToEnd() Response.Close() ResponseStream.Close() Next I need to simulate the user having entered information into the 2 TextBoxes and pressing logon.... I have a hunch this requires me to add the right sort of "PostData" to the request. before submitting. However I'm also concerned that "ViewState" may be an issue. Am I correct regarding the PostData? How do I add the postData to the request? Do I need to be concerned about Viewstate? Update: While I appreciate that Selenium or similar products are useful for acceptance testing , I find that they are rather clumsy for what amounts to load testing. I would prefer not to load 100 instances of Firefox or IE in order to simulate 100 users hitting my site. This was the reason I was hoping to take the ASPNet HttpWebRequest route.

    Read the article

  • WM_NCHITTEST and secondary monitor to left of primary monitor

    - by AlanKley
    The described setup with 2nd monitor to left of primary causes WM_NCHITTEST to send negative values which is apparently not supported according to this post. I have a custom control written in win32 that is like a Group control. It has a small clickable area. No MOUSE events are coming to my control when the window containing the custom control lies on a second monitor to the left of the primary monitor. SPY++ shows WM_NCHITTEST messages but no Mouse messages. When window is moved to primary monitor or secondary monitor is positioned to right of primary (all points are positive) then everything works fine. Below is how the WM_NCHITTEST is handled in my custom control. In general I need it to return HTTRANSPARENT so as not to obscure other controls placed inside of it. Anybody have any suggestions what funky coordinate translation I need to do and what to return in response to WM_NCHITTEST to get Mouse messages translated and sent to my control in the case where it is on a 2nd monitor placed to the left of the primary monitor? case WM_NCHITTEST: { POINT Pt = {LOWORD(lP), HIWORD(lP)}; int i; ScreenToClient (hWnd, &Pt); if (PtInRect (&rClickableArea, Pt)) { return(DefWindowProc( hWnd, Msg, wP, lP )); } } lReturn = HTTRANSPARENT; break;

    Read the article

  • is it possible to turn off vdso on glibc side?

    - by heroxbd
    I am aware that passing vdso=0 to kernel can turn this feature off, and that the dynamic linker in glibc can automatic detect and use vdso feature from kernel. Here I met with this problem. There is a RHEL 5.6 box (kernel 2.6.18-238.el5) in my institution where I only have a normal user access, probably suffering from RHEL bug 673616. As I compile a toolchain of linux-headers-3.9/gcc-4.7.2/glibc-2.17/binutils-2.23 on top of it, gcc bootstrap fails in cc1 in stage2 cannnot be run Program received signal SIGSEGV, Segmentation fault. 0x00002aaaaaaca6eb in ?? () (gdb) info sharedlibrary From To Syms Read Shared Object Library 0x00002aaaaaaabba0 0x00002aaaaaac3249 Yes (*) /home/benda/gnto/lib64/ld-linux-x86-64.so.2 0x00002aaaaacd29b0 0x00002aaaaace2480 Yes (*) /home/benda/gnto/usr/lib/libmpc.so.3 0x00002aaaaaef2cd0 0x00002aaaaaf36c08 Yes (*) /home/benda/gnto/usr/lib/libmpfr.so.4 0x00002aaaab14f280 0x00002aaaab19b658 Yes (*) /home/benda/gnto/usr/lib/libgmp.so.10 0x00002aaaab3b3060 0x00002aaaab3b3b50 Yes (*) /home/benda/gnto/lib/libdl.so.2 0x00002aaaab5b87b0 0x00002aaaab5c4bb0 Yes (*) /home/benda/gnto/usr/lib/libz.so.1 0x00002aaaab7d0e70 0x00002aaaab80f62c Yes (*) /home/benda/gnto/lib/libm.so.6 0x00002aaaaba70d40 0x00002aaaabb81aec Yes (*) /home/benda/gnto/lib/libc.so.6 (*): Shared library is missing debugging information. and a simple program #include <sys/time.h> #include <stdio.h> int main () { struct timeval tim; gettimeofday(&tim, NULL); return 0; } get segment fault in the same way if compiled against glibc-2.17 and xgcc from stage1. Both cc1 and the test program can be run on another running RHEL 5.5 (kernel 2.6.18-194.26.1.el5) with gcc-4.7.2/glibc-2.17/binutils-2.23 as normal user. I cannot simply upgrade the box to a newer RHEL version, nor could I turn VDSO off via sysctl or proc. The question is, is there a way to compile glibc so that it turns off VDSO unconditionally?

    Read the article

  • How can I exclude pages created from a specific template from the CQ5 dispatcher cache?

    - by Shawn
    I have a specific Adobe CQ5 (5.5) content template that authors will use to create pages. I want to exclude any page that is created from this template from the dispatcher cache. As I understand it currently, the only way I know to prevent caching is to configure dispatcher.any to not cache a particular URL. But in this case, the URL isn't known until a web author uses the template to create a page. I don't want to have to go back and modify dispatcher.any every time a page is created--or at least I want to automate this if there is no other way. I am using IIS for the dispatcher. The reason I don't want to cache the pages is because the underlying JSPs that render the content for these pages produce dynamic content, and the pages don't use querystrings and won't carry authentication headers. The pages will be created in unpredictable directories, so I don't know the URL pattern ahead of time. How can I configure things so that any page that is created from a certain template will be automatically excluded from the dispatcher cache? It seems like CQ ought to have some mechanism to respect HTTP response/caching headers. If the HTTP response headers specify that the response shouldn't be cached, it seems like the dispatcher shouldn't cache it--regardless of what dispatcher.any says. This is the CQ5 documentation I have been referencing.

    Read the article

  • Getting proper indentation using XMLBuilder in a helper

    - by Robbie
    I'm attempting to use a view helper to create some dynamic links based on if you're logged in or not. What I want returned, for sake of easy code readability, is: <ul class="right"> <li><a href="#">Login</a></li> <li><a href="#">Register</a></li> </ul> In the view helper I have this Ruby code: def loginh xm = Builder::XmlMarkup.new(:indent=>2, :margin=>4) xm.ul("class" => "right") { xm.li('class' => 'text') { xm.text("test") } } end In the view, the line that calls login helper is already indented 4 levels. Because of this, the first line gets 'skewed', so in the view I have: <%= loginh %> Which results in: <ul class="right"> <li class="text"> <text>test</text> </li> </ul> You can see it works perfectly, except for the first line. It would appear that the first line is affected by the indent before <%= loginh % is called. I can easily remedy this by removing the indentation prior to <%= loginh % - but in essence I'd be sacrificing code readability for markup readability. Which isn't what I'm looking to do. Is there any way I could remove the beginning whitespace?

    Read the article

  • Thread safe lazy contruction of a singleton in C++

    - by pauldoo
    Is there a way to implement a singleton object in C++ that is: Lazily constructed in a thread safe manner (two threads might simultaneously be the first user of the singleton - it should still only be constructed once). Doesn't rely on static variables being constructed beforehand (so the singleton object is itself safe to use during the construction of static variables). (I don't know my C++ well enough, but is it the case that integral and constant static variables are initialized before any code is executed (ie, even before static constructors are executed - their values may already be "initialized" in the program image)? If so - perhaps this can be exploited to implement a singleton mutex - which can in turn be used to guard the creation of the real singleton..) Excellent, it seems that I have a couple of good answers now (shame I can't mark 2 or 3 as being the answer). There appears to be two broad solutions: Use static initialisation (as opposed to dynamic initialisation) of a POD static varible, and implementing my own mutex with that using the builtin atomic instructions. This was the type of solution I was hinting at in my question, and I believe I knew already. Use some other library function like pthread_once or boost::call_once. These I certainly didn't know about - and am very grateful for the answers posted.

    Read the article

  • desing pattern for related inputs

    - by curiousMo
    My question is a design question : let's say i have a data entry web page with 4 drop down lists, each depending on the previous one, and a bunch of text boxes. country (ddl), state (ddl), city (ddl), boro (ddl), address (txtBox), zipcode(txtbox). and an object that represents a datarow with a value for each. naturally the country, state, city and boro values will be values of primary keys of some lookup tables. when the user chooses to edits that record, i would load it from database and load it into the page. the issue that I have is how to streamline loading the ddls. i have some code that would grab the object, look thru its values and move them to their corresponding input controls in one shot. but in this case i will have to load possible values of country, then assign values, then load values of state, then assign value ans so on. I guess i am looking for an elegant solution. i am using asp.net, but i think it is irrelevant to the question. i am looking more into a design pattern. thanks

    Read the article

  • WPF validation red border doesn't show If UserControl collapsed first

    - by Creepy Gnome
    There seems to be a bug with WPF in 3.5, and I was hoping someone may have found a workaround. Basically if you have a custom UserControl that contains a TextBox and it is in a Window but initialized to be Collapsed by default in the xaml or code behind if it fails validation when you make the control visible it will not show the red border until it fails while visible. However, this works correctly when visibility is set to Hidden, just no when Collapsed. I am already overriding the ErrorTemplate with a style to workaround the Adornment issue with the red border staying visibile when you collapse the control. Below is my full style for the TextBox. If there is any additional changes or additions to make it work correctly with collapsed controls that would be great. <Style TargetType="TextBox"> <Setter Property="Margin" Value="3" /> <Setter Property="Validation.ErrorTemplate"> <Setter.Value> <ControlTemplate> <ControlTemplate.Resources> <BooleanToVisibilityConverter x:Key="converter" /> </ControlTemplate.Resources> <DockPanel LastChildFill="True"> <Border BorderThickness="2" BorderBrush="Red" Visibility="{ Binding ElementName=placeholder, Mode=OneWay, Path=AdornedElement.IsVisible, Converter={StaticResource converter}}" > <AdornedElementPlaceholder x:Name="placeholder" /> </Border> </DockPanel> </ControlTemplate> </Setter.Value> </Setter> <Style.Triggers> <Trigger Property="Validation.HasError" Value="true" > <Setter Property="ToolTip" Value="{Binding RelativeSource={RelativeSource Self}, Path=(Validation.Errors)[0].ErrorContent}" /> </Trigger> </Style.Triggers> </Style>

    Read the article

  • Can I have two separate projects, 1 WebForms and 1 ASP.NET MVC, to both point to the same domain?

    - by Hamman359
    Is it possible to setup two separate projects, 1 WebForms and 1 ASP.NET MVC, to both point to the same domain? i.e. both point to different pages within www.somesite.com. Here's some background on the application and why I'm asking. This is a brownfield application that is currently 2.0 WebForms and is full of WebFormy 'goodness' (i.e. ObjectDataSources, FormView controls, UpdatePanels, etc...) There are lost of other 'fun' things in the code base like 600+ Stored Procedures and 200+ line methods in the business layer code that get data from the DB via stored proc, do some processing on the data, build an HTML string using string concatenation and then return that string to the UI layer. What we are planning on doing is developing new features in MVC and slowly converting the existing features over to MVC one at a time. As part of this transition, we will also be re-writing the layers below the UI to clean up the mess there and to do things like replace the stored procedures with NHibernate and introduce an IOC container. I know that you can run WebForms and MVC side-by-side in the same project, however, because we will be making wholesale changes to the way we do many things throughout our entire development stack, I'd like the new stuff to be a completely separate project within the solution. This should help serve as very visual reminder that this is a different way of doing things than before and make it easier to remove the old code as it is no longer needed. What I don't know is, is this even possible? Can two separate project point to the same domain? Here's an quick example of what I'm thinking: www.somesite.com/orders.aspx?id=123 (Orders page from existing WebForms project) www.somesite.com/customer/987 (Customer page from new MVC project)

    Read the article

  • FindControl in DataList Edit Mode

    - by Doug
    As a new .net/C# web begginner, I always get tripped up when I try to use FindControl. Blam -flat on my face. Here is my current FindControl problem: I have an .aspx page and Form, then ajax updatePanel, inside it there is my DataList (DataList1) that has an EditItemTemplate: that has the following: <EditItemTemplate> <asp:Label ID="thumbnailUploadLabel" runat="server" text="Upload a new thumbnail image:"/><br /> <asp:FileUpload ID="thumbnailImageUpload" runat="server" /> <asp:Button ID="thunbnailImageUploadButton" runat="server" Text="Upload Now" OnClick="thumbnailUpload"/><br /> </EditItemTemplate> In my C# code behind I have the OnClick code for the fileUpload object: protected void thumbnailUpload(object s, EventArgs e) { if (thumbnailImageUpload.HasFile) { //get name of the file & upload string imageName = thumbnailImageUpload.FileName; thumbnailImageUpload.SaveAs(MapPath("../../images/merch_sm/" + imageName)); //let'em know that it worked (or didn't) thumbnailUploadLabel.Text = "Image " + imageName + "has been uploaded."; } else { thumbnailUploadLabel.Text = "Please choose a thumbnail image to upload."; } So of course I'm getting "Object reference not set to an instance of an object" for the FileUpload and the Label. What is the correct syntax to find these controls, before dealing with them in the OnClick event? The only way Ive used FindControl is something like: label thumbnailUploadLabel = DataList1.FindControl("thumbnailUploadLabel") as Label; But of course this is throwing the "Object reference not set to an instance of an object" error. Any help is very much appreciated. (I've also seen the 'recursive' code out there that is supposed to make using FindControl easier. Ha! I'm so green at C# that I don't even know how to incorporate those into my project.) Thanks to all for taking a look at this.

    Read the article

  • ComDlg32.ocx Error: Object doesn't support this property or method

    - by abhilashca
    I'm developing an html editor using ComDlg32.ocx (Commom Dialog Control), using HTML and VBScript. My exact requirement was to prompt Open/Save/Color/Print/Font dialog boxes.Ive written code for prompting Save file dialog box. Also I've added a license file using LPK Tool onto my webpage. My html-source looks like: <body> <!-- lpk file --> <object classid="clsid:5220cb21-c88d-11cf-b347-00aa00a28331"> <param name="LPKPath" value="License/comdlg.lpk" /> </object> <!-- Microsoft Common Dialog Control --> <object classid="CLSID:F9043C85-F6F2-101A-A3C9-08002B2F49FB" codebase="http://activex.microsoft.com/controls/vb6/COMDLG32.CAB" id="objComDlg"></object> </body> Now, here comes my error. Whenever I try to call the vbscript for prompting the Save File dialog box, Im getting an error as : Object doesn't support this property or method: 'objComDlg.Filter' If I comment out the objComDlg.Filter then the error move on to objComDlg.DialogTitle and thus it goes on. And my VBScript look like: FILE_FORMATS = "Rich Text Format (*.rtf)|*.rtf|Microsoft Word (*.doc)|*.doc|ANSI Text Document (*.txt)|*.txt" objComDlg.Filter = FILE_FORMATS <--- Error shows here objComDlg.DialogTitle = "Save As " objComDlg.Flags = cdlOFNFileMustExist Or cdlOFNHideReadOnly objComDlg.CancelError = True objComDlg.ShowSave Does anyone have an idea why this is happening? Is there any proper documentation for using this particular ActiveX control? My current development is in stand-still due to this error. Any help will be appreciated. Looking forward for your response. BTW, I'm using Windows XP SP3 and IE8 for my development. Thanks.

    Read the article

  • Django apache-wsgi configuration problem

    - by omat
    Hi, I am trying to get my Django project running on the production server. I setup the environment using pip, so it is identical to the development environment where everything is running fine. The only difference is that I don't use virtualenv on production, because this project is the only one that is going to run on production. Also on production, there is an Nginx reverse proxy to serve static content, and passes dynamic requests to Apache2. The Apache wsgi file is as follows: import sys, os sys.path.append('/home/project/src') os.environ['DJANGO_SETTINGS_MODULE'] = 'settings' import django.core.handlers.wsgi application = django.core.handlers.wsgi.WSGIHandler() When I access the server, I get an import error: ImproperlyConfigured: Error importing middleware middleware: "cannot import name UserProfile" Which refers to the middleware.py under src/ folder which is referred by the settings. But I can import both the middleware and the UserProfile class from within ./manage.py shell prompt. It seems like a problem with paths in wsgi file but I cannot see what. The directory structure is: /home/project /home/project/src (which contains the settings.py, middleware.py and app folders) /home/apache/apache.wsgi Any help is greatly appreciated. Thanks, oMat

    Read the article

  • PHP not obeying my defined ETags

    - by Sam Bisbee
    What I'm doing I'm pulling an image from the database and sending it to the browser with all the proper headers - the image displays fine. I also send an ETag header, using the SHA1 of the image's content as the tag. The images are getting called semi regularly, so caching is a bit of an issue (won't kill the site, but nice to have). The Problem $_SERVER['HTTP_IF_NONE_MATCH'] is not available to me. As far as I can tell, this is because of PHP's "disobey the cache controls" life style. I can't mess with the session cache limiter, because I don't have access. But, even if I did have access, I wouldn't want to touch it: 99% of the site is under WordPress. The Environment PHP 4 (don't ask) Apache 2.2 WordPress The images live in the database (largeblog), which I can't change. Any guidance, tip/tricks, etc. would be helpful. I don't have much room to change the environmental/structural stuff. Cheers.

    Read the article

  • How to handle activity life cycle involving sockets in Android?

    - by Henrik
    Hello all, I have an Android activity which in turn starts a thread. In the thread I open a persistent TCP socket connection. When the socket connects to the server dynamic data is downloaded. The thread sends messages using Handler-class to the activity when data has been received. Now if the user happens to switch from portrait to landscape mode the activity gets an onDestroy call. At this moment I close the socket and stop the thread. When Android has switched landscape mode it calls onCreate yet again and I have to do a socket re-connect. Also, all of the data the activity received needs to be downloaded once more because the server does not have the ability to know what has been sent before, i.e. there is no "resume" feature. Thus the problem is that there is alot of data which is resent all the time when landscape mode is changed. What are my options here? Should I create a service which handles the socket traffic towards the server thus I always got all the data which the server has sent in the service. Or should I disable landscape mode all together perhaps? Or would my best bet be to rewrite my server which is a VERY BIG job :-) All input is welcome :-) / Henrik

    Read the article

  • Personal Cache vs Memcache?

    - by Kerry
    I have a personal caching class, which can be seen here ( based off WordPress' ): http://pastie.org/988427 I recently learned about memcache and it said to memcache EVERYTHING: http://highscalability.com/blog/2010/5/17/7-lessons-learned-while-building-reddit-to-270-million-page.html My first thought was just to keep my class with the current functions and make it use memcache instead -- is there any downside to doing this? The main difference I see is that memcache stays on with the server from page to page, while mine is for 1 page load. The problem I see arising, and this is with any system, is that they're dynamic. They change all the time. Whether its search results, visible products, etc. etc. If it's all cached, won't the create a problem? Is there a way to handle this? Obviously if something is bringing back the same results everytime it would be cached, but that's why I was doing it on a per page load basis. I'm sure there is a way to handle this, or is the cache time usually set between 5 minutes and an hour?

    Read the article

  • Canonical resource for forms-based design in ASP.NET MVC?

    - by Robert Harvey
    Is there a resource on the web that describes various form scenarios in ASP.NET MVC, and gives example solutions within a sensible, consistent design philosophy? Examples of such scenarios might be: One-to-many forms, like invoice data-entry forms. Foreign-table forms such as Add New User in a form that requires specifying a user Forms that require dynamic interaction, using Ajax or JSON. Popup forms Forms requiring multiple data records to be input, without postbacks. Note that there is considerable conceptual and technological overlap among these example scenarios. I am aware that there is a vast patchwork quilt of available technologies and examples out there that provide partial solutions and pieces of solutions, such as jQuery Ajax, CSS, and so forth. But I would like guidance in using these technologies in more effective and consistent ways. I am not considering web forms integration with an ASP.NET MVC application; I would still like my applications to be pure MVC. Nor am I, at the moment, considering a paid solution like Telerik. But I would like to know if someone has already done some of the work combining these technologies into a consistent, cohesive whole, that follows a sensible design philosophy. (an open source framework, perhaps?)

    Read the article

< Previous Page | 422 423 424 425 426 427 428 429 430 431 432 433  | Next Page >