Search Results

Search found 11107 results on 445 pages for 'drive bay'.

Page 427/445 | < Previous Page | 423 424 425 426 427 428 429 430 431 432 433 434  | Next Page >

• Where to find new Micro-BTX (uBTX) motherboards? Or should I just replace the box?

  - by John Rudy

  OK, so I'm guessing that it's dead. It's not my machine, and the owner is on a very fixed (IE, none) income. I'm generous, but I'm not that generous, since I already gave him what (at the time) was a fully functional and fairly well-equipped machine. (Aside from the mobo and proc, almost nothing else in it was stock. I'd taken it up to 3GB of RAM, upgraded the hard drive, added a decent video card, installed a wireless adapter, running Vista, etc.) According to further research, the machine uses a Micro-BTX (uBTX) motherboard, and since it's an AMD Athlon64, the AM2 socket. So I'm looking at a few options, and am wondering what's the best route to take? Find an AM2 socket uBTX mobo. I can't find them new online anywhere, leading me to believe that this is an obsolete form factor/chip combination. I don't want a refurb or a system pull because, quite honestly, once I deal with this mess, I don't want to go through it again in another year or two. Find an Intel uBTX mobo and a (relatively -- hah, I still want at least a dual-core) inexpensive Intel CPU. At this point, the only things stock in the machine would be the case and the PSU. :) Buy a bare-bones kit (mobo/proc/PSU/case, sometimes even RAM) from somewhere like CompUSA/TigerDirect or Fry's and move all of the other hardware over. This makes life difficult because the copy of Vista is an upgrade, tied to the copy of XP which shipped on the Gateway, which is OEM and won't install on the new box. :) If I change the CPU brand (AMD to Intel), will I need to reinstall Windows, or can it just be reactivated? Where can I actually find a new, in-box, not system pull, not refurb AM2 uBTX mobo? Do they even exist anymore? What kind of money are we talking (US dollars)? The end goal is to get the machine functional again as cheaply as humanly possible. If it were my own machine, I wouldn't even be asking this, I'd be custom-building a new one. However, it's not mine, I'm shelling out of pocket for the fix (plus the work), and thus want to keep that end price low-low-low.

  Read the article

• Unable to delete a file using bash script

  - by user3719091

  I'm having problems removing a file in a bash script. I saw the other post with the same problem but none of those solutions solved my problem. The bash script is an OP5 surveillance check and it calls an Expect process that saves a temporary file to the local drive which the bash script reads from. Once it has read the file and checked its status I would like to remove the temporary file. I'm pretty new to scripting so my script may not be as optimal as it can be. Either way it does the job except removing the file once it's done. I will post the entire code below: #!/bin/bash #GET FLAGS while getopts H:c:w: option do case "${option}" in H) HOSTADDRESS=${OPTARG};; c) CRITICAL=${OPTARG};; w) WARNING=${OPTARG};; esac done ./expect.vpn.check.sh $HOSTADDRESS #VARIABLES VPNCount=$(grep -o '[0-9]\+' $HOSTADDRESS.op5.vpn.results) # Check if the temporary results file exists if [ -f $HOSTADDRESS.op5.vpn.results ] then # If the file exist, Print "File Found" message echo Temporary results file exist. Analyze results. else # If the file does NOT exist, print "File NOT Found" message and send message to OP5 echo Temporary results file does NOT exist. Unable to analyze. # Exit with status Critical (exit code 2) exit 2 fi if [[ "$VPNCount" > $CRITICAL ]] then # If the amount of tunnels exceeds the critical threshold, echo out a warning message and current threshold and send warning to OP5 echo "The amount of VPN tunnels exceeds the critical threshold - ($VPNCount)" # Exit with status Critical (exit code 2) exit 2 elif [[ "$VPNCount" > $WARNING ]] then # If the amount of tunnels exceeds the warning threshold, echo out a warning message and current threshold and send warning to OP5 echo "The amount of VPN tunnels exceeds the warning threshold - ($VPNCount)" # Exit with status Warning (exit code 1) exit 1 else # The amount of tunnels do not exceed the warning threshold. # Print an OK message echo OK - $VPNCount # Exit with status OK exit 0 fi #Clean up temporary files. rm -f $HOSTADDRESS.op5.vpn.results I have tried the following solutions: Create a separate variable called TempFile that specifies the file. And specify that in the rm command. I tried creating another if statement similar to the one I use to verify that file exist and then rm the filename. I tried adding the complete name of the file (no variables, just plain text of the file) I can: Remove the file using the full name in both a separate script and directly in the CLI. Is there something in my script that locks the file that prevents me from removing it? I'm not sure what to try next. Thanks in advance!

  Read the article

• Windows 7 extremely slow login, exchange performance, printer enumeration, etc...

  - by Jeff

  Background: I have a fresh copy of Windows 7 Professional x64 on a Dell Latitude E6500. The laptop has 8GB RAM, 250GB drive, and all Intel peripherals (net/wifi/graphics). All available Windows updates, as well as hardware drivers are installed. The IT folks where I work joined the computer to our Windows 2003-based Active Directory domain. There are no errors in any logs that we've looked at, and Group Policy templates appear to have applied properly. Problem: Every time I turn on or reboot the computer, it takes between 2 to 10 (all times are actual) minutes after successfully typing my username/password to get to my desktop. My login script does not always run. Sometimes I get a black screen, and a couple of minutes later the login script will pop up and take up to 10 minutes to complete. I can get around this by hitting cntrl-shift-esc and running explorer.exe from the Task Manager. The login script continues to hang, but I can minimize it and go on about my business. Either way, it generally throws errors prior to completing. I often get slow or failed connectivity to Exchange via Outlook. When I bring up printer dialogs, they take several minutes to populate, and block the calling app while doing so. Copies to SMB shares are very slow. On my home network, everything works fine. On both the work network and home network, I can use remote internet resources just fine. Web pages pull up, remote VPN's are fine, I can max out bandwidth on SpeakEasy Speed Test. I can get almost max bandwidth transferring FTP/HTTP over a LAN. Another symptom of the problem is that when I first log in, the work network shows as "Identifying" for a long time in the Network and Sharing Center, and will often then change to the name of the work domain, but say "Unauthenticated Network". Note that this computer previously ran Windows Vista with none of these problems. Attempts to Fix: Installed the Win7 admin pack Uninstalled/reinstalled all hardware drivers Verified Active Directory DNS settings (Vista works relatively well on the same network) Reset all TCP/IP settings on all adapters using the netsh commands to do so Disabled ipv6 on all adapters Disable wifi adapter while on work network Locked the network card to 100/Full, 1000/Full; also tried Auto Added various important addresses to hosts file (exchange, dns, ad) -- removed when didn't help My background is a jpeg (sounds unrelated but there is apparently a win7 login bug related to solid color background) More I have forgotten The IT staff at my company indicated they believe this is due to having Windows 2003 AD servers and not having any Windows 2008 R2 AD servers. Other than that, they have no advice or assistance to offer other than a rebuild (already tried that once with similar symptoms), or downgrade to Vista. Any thoughts out there?

  Read the article

• Win7 playback of dvr-ms files stutters

  - by Jim Lynn

  I've just had to install Windows 7 on my Media Center machine because my Vista installation had a faulty drive. I've got the latest drivers that I can find - Intel 945GM integrated Graphics, Realtek audio drivers. Things are working OK with one exception. Playback of old recordings, from dvr-ms format files, is choppy. The picture freezes for a fraction of a second, then quickly catches up. The sound is uninterrupted and doesn't pause. These freezes happen once every 5 seconds or so. It's very regular. Playback of Live TV from the digital tuner is perfectly smooth. DVD playback is perfectly smooth. As an experiment, I used the MPEG editing package VideoReDo to create a small test file in three different formats. This program takes the raw MPEG streams and repackages them into the desired container. I took the same clip and created three files in three formats: dvr-ms (Microsoft's old recorded TV format); mpg (standard MPEG); and ts (raw MPEG transport stream of the kind often produced by PVRs). When these three files are played back under Windows 7, the mpg and ts files play smoothly, but the dvr-ms file stutters. The last piece of data I have is that two other Windows 7 machines can play back dvr-ms files smoothly with no stuttering. One is a netbook, with less grunt than the media centre. So there must be something specific about my Media Center machine that's causing the problem. Does anyone have any idea where I can look now? I don't know much about AV software, codecs, filter graphs etc. but I suspect that's where the problem lies. Rendering the video isn't the problem, but extracting the streams is. How would I go about diagnosing the problem? Edited to add: I just used the GraphStudio tool to look at the filter graph on the offending PC. The filter graph it uses by default for dvr-ms looks identical to the other machines, and, interestingly, when I play the files using GraphStudio they run smoothly. Under Windows Media Player and Windows Media Center they stutter. I'd like to see the filter graph for WMP but GraphStudio won't show it. It looks like WMP and WMC are using a different decoding path to GraphStudio. Edited again to add: Today I purchased a new HDTV. The same Media Center driving the TV at 1080p is now playing back the old Recorded TV files smoothly, without stuttering. So whatever the cause of the original problem, using a different resolution seems to have removed the problem. It might also explain why nobody else has had this problem. I doubt many people use Media Centre with a 14in portable TV.

  Read the article

• Installing drivers for switchable graphics

  - by Anonymous

  I recently bought a laptop that came with Windows 7 64-bit installed. I have some older (16-bit and 32-bit) software that doesn't work with 64-bit Windows, but works just fine with 32-bit. Since I also wanted to get rid of all of the pre-installed spam, I decided to wipe the hard drive and install a fresh copy of Windows 7 32-bit. I can't get the graphics cards working. This laptop uses switchable graphics, an Intel card and a Radeon card. I first tried installing this driver from Intel, which works for the Intel card. Of course, the Radeon card doesn't work with this driver and I need it for some of the newer games I have. I also tried this driver. Windows's device manager will recognize the Radeon card, but it will still use the Intel card. Also, even though that package says it contains the Intel driver, the Intel card still isn't properly recognized by Windows (leaving me with a nasty 800x600 resolution). On top of that, the Catalyst Control Center won't open (saying "The Catalyst Control Center is not supported by the driver version of your enabled graphics adapter") I tried installing HP's driver then installing Intel's driver on top of it. Device manager will then recognize both graphics cards properly. However, the laptop still uses the Intel card. The CCC still won't start (saying the same thing as before) and I can't find any of 'switching' graphics cards. Before formatting, I could right-click the desktop and click "Configure Switchable Graphics" This option hasn't been in the context menu regardless of what driver(s) I've installed. After some research, I found out that this menu entry runs the command "cli.exe Start PowerXpressHybrid" I've tried manually running this command, but I get the same unsupported message from CCC. So, does anyone know how I can get this working? I would like to be able to switch between the Intel and Radeon. But, if there's some way to disable the Intel and use only the Radeon, that would be fine I dual-boot with Linux (framebuffer uses the Intel, haven't even tried getting X set up yet) Here's the output of lspci # lspci -v | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller]) 01:00.0 VGA compatible controller: ATI Technologies Inc NI Seymour [AMD Radeon HD 6470M] (prog-if 00 [VGA controller]) The laptop is a HP Pavilion g6t-1d00. HP doesn't support installing anything but Windows 7 64-bit, so calling tech support isn't an option. Thanks for any help UPDATE: I finally got it working. After a fresh install of Windows 7, I installed the HP driver (the one linked above). Then, there's an optional Windows update I installed (don't remember the exact name, but it'll stick out). After that, graphics switching works just like it's supposed to. Moab, thanks anyways for your help

  Read the article

• How to reinstall Mac OS X on OS X/Linux dual-boot system?

  - by strangeronyourtrain

  My setup: I have a MacBook Pro 5,5 with a Mac OS X Snow Leopard partition and a Linux partition. I use rEFIt to boot into Linux. I didn't use Boot Camp when I originally installed Linux; instead, I manually created the partition (with either Disk Utility in OS X or Gparted on a Linux live CD--I don't recall which one) and then installed Linux on it from a live CD. The problem: My OS X partition is corrupt, and I need to reinstall Snow Leopard. Since I installed rEFIt from within OS X, I'm concerned that wiping the OS X partition will prevent me from booting into my Linux partition. How can I do this without losing access to my Linux partition? Is it possible to install Snow Leopard on the partition I reserved for it, or will it automatically overwrite the entire drive? And if I do the fresh OS X install and then install rEFIt again, will it automatically recognize my Linux partition? Thanks for any tips! Specs: MacBook Pro 5,5 (Mid-2009); Snow Leopard 10.6.7/64-bit Sabayon Linux, 2.6.36 kernel EDIT/UPDATE: Thanks, but the situation has taken a more complicated turn: I tried to reinstall Snow Leopard from the DVD, but it refused to install onto my Mac partition, claiming: "The disk cannot be used to start up your computer." Disk Utility wouldn't let me resize the partition or create a new one, and it doesn't see my Linux partition. It only displays the two partitions "Macintosh HD" and Linux Swap. I can, however, see all the partitions from Linux. This is the partition table as shown in Gparted: And the output of "fdisk -l" is: WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sda1 1 409639 204819+ ee GPT /dev/sda2 409640 349590464 174590412+ af HFS / HFS+ /dev/sda3 483122745 488392064 2634660 82 Linux swap / Solaris /dev/sda4 * 349590465 483122744 66766140 83 Linux Partition table entries are not in disk order I wonder if this is because I originally partitioned my disk with Gparted instead of OS X's Disk Utility (at this point, I don't recall whether I used Gparted or Disk Utility). In any case, it doesn't seem safe to do any reformatting with Disk Utility now, as I'm afraid it will wipe sda2 ("Macintosh HD") as well as sda4 (my Linux partition). So... I'm hoping to find a solution that doesn't involve wiping my entire hard disk. Would it be safe/possible to use Gparted to erase sda2 ("Macintosh HD") and then use the Snow Leopard DVD to install OS X onto [I]just[/I] sda2 without touching the other partitions? Thanks for any insight!

  Read the article

• VMWare-Mount not recognizing virtual disks

  - by user36175

  I have two disks as .vmdk files, and four as .vdi files. I can boot virtual machines on them with Sun xMV VirtualBox, and they work just fine. However, I want to mount them on my local computer so I can read some files off of them without starting a virtual machine. I downloaded the vmware-mount utility, but I get this error, even when mounting .vmdk files, which should be VMWare images... Unable to mount the virtual disk. The disk may be in use by a virtual machine, may not have enough volumes or mounted under another drive letter. If not, verify that the file is a valid virtual disk file. Thinking it's a problem with the utility, I downloaded the SDK and made my own simple program in C to try to mount a disk. It just initializes the API, connects to it, then attempts to open the disk. I get this error, once again claiming it is not a virtual disk: **LOG: DISKLIB-DSCPTR: descriptor above max size: I64u **LOG: DISKLIB-LINK : "f:\programming\VMs\windowstrash.vdi" : failed to open (The file specified is not a virtual disk). **LOG: DISKLIB-CHAIN : "f:\programming\VMs\windowstrash.vdi" : failed to open (The file specified is not a virtual disk). **LOG: DISKLIB-LIB : Failed to open 'f:\programming\VMs\windowstrash.vdi' with flags 0x1e (The file specified is not a virtual disk). ** FAILURE ** : The file specified is not a virtual disk The files are clearly virtual disks, though, since I can actually mount and use them with a virtual machine. I tried detaching them from any VMs and trying again, but I got the same results. Any ideas? Maybe the "descriptor above max size" is a hint? Some more info: the .vmdk disks were created on other computers. I just copied them to mine and created new VMs around them, but they work fine. All the .vdi files were created on my machine. Not sure if that affects anything. Update: WinMount can mount the file.. so the problem seems to be with vmware-mount.

  Read the article

• Setting up a fileserver, some questions?

  - by Tanax

  Recently I've become very interested in setting up a fileserver, mostly for home usage but also because of the fact that I live in 2 places, I need to be able to access my files from both homes. I have already done some research into this but I am unclear about some things. My requirements are the following; Needs to work on both Mac and PC(only using Windows atm on PC but could be good if it supports more OS's to make it futureproof in case I need Linux or something else) Need to be able to set up a folder/drive/network space to act as a link to a certain folder on the fileserver All files should only be stored on the fileserver, e.g. no "shared" folders like in Dropbox where files are stored on the client computer Would prefer it if folders are password protected or that I can somehow specify what users can access the fileserver's shares Fileserver's OS most likely have to be Windows due to other factors outside of being just a fileserver I've already kinda figured out that I will need to set up a VPN so that I can access my fileserver from outside the local network. Probably going to use OpenVPN. Question 1: How would I go about to set up a VPN server so that I can connect to my local network at the fileserver's location? I know that since I'm on a dynamic IP I will have to get some sort of dynamic DNS server - I've already checked into this and I'm fairly sure I know how to fix that. I also know that I will have to forward the port OpenVPN uses in my router. Question 2: How would I actually share the folders on the fileserver so that I can access them on my other computers? I've researched into Samba but I'm uncertain if it needs to be run on a Linux OS. I know that the clients connecting to it can be Windows for example but can the Samba "server" be run on Windows? Also it appears that Samba shares a folder, meaning it works like Dropbox - I don't want that. So how would I share a folder in that case to make it work like I want it to? Sorry for the incredibly long question, I tried to structure it the best I could for easier read. Thanks in advance!

  Read the article

• Setting up a fileserver, some questions?

  - by Tanax

  Recently I've become very interested in setting up a fileserver, mostly for home usage but also because of the fact that I live in 2 places, I need to be able to access my files from both homes. I have already done some research into this but I am unclear about some things. My requirements are the following; Needs to work on both Mac and PC(only using Windows atm on PC but could be good if it supports more OS's to make it futureproof in case I need Linux or something else) Need to be able to set up a folder/drive/network space to act as a link to a certain folder on the fileserver All files should only be stored on the fileserver, e.g. no "shared" folders like in Dropbox where files are stored on the client computer Would prefer it if folders are password protected or that I can somehow specify what users can access the fileserver's shares Fileserver's OS most likely have to be Windows due to other factors outside of being just a fileserver I've already kinda figured out that I will need to set up a VPN so that I can access my fileserver from outside the local network. Probably going to use OpenVPN. Question 1: How would I go about to set up a VPN server so that I can connect to my local network at the fileserver's location? I know that since I'm on a dynamic IP I will have to get some sort of dynamic DNS server - I've already checked into this and I'm fairly sure I know how to fix that. I also know that I will have to forward the port OpenVPN uses in my router. Question 2: How would I actually share the folders on the fileserver so that I can access them on my other computers? I've researched into Samba but I'm uncertain if it needs to be run on a Linux OS. I know that the clients connecting to it can be Windows for example but can the Samba "server" be run on Windows? Also it appears that Samba shares a folder, meaning it works like Dropbox - I don't want that. So how would I share a folder in that case to make it work like I want it to? Sorry for the incredibly long question, I tried to structure it the best I could for easier read. Thanks in advance!

  Read the article

• Windows 7 boot problem (with colorful blinking smilies)

  - by Ishmael Smyrnow

  I put my computer (Windows 7) to sleep, and a couple hours later, tried to wake it back up, but the monitor wouldn't come back on. I did a hard reset (held power button), but I still couldn't get the monitor to show anything. I plugged it into my laptop, and the monitor works fine. I then swapped out the video card with an older one I have. The monitor came on and started showing the boot process. However, shortly after the Windows 7 animated logo came up, the screen went blank, it made this weird beeping noise, and I seen the strangest thing ever. Small, colorful blocks started to fill my screen, and flash, as if something was loading. Inside of those blocks, were smilies (like the ASCII character kind). This continued for about a minute, then the computer rebooted. It scared the sh!t out of me. I've never had a virus before, and I'm savvy enough to keep myself from one, but I'm wondering if that's what it was. I've been using computers for ages, and never seen anything quite like this. Has anyone ever seen something like this? I'm doing hardware diagnostics before trying to boot into Windows again. Hopefully I can figure this out, but I thought I would consult the SU community while I wait on these results. -- UPDATE -- I did a Memory Diagnostic, which turned up nothing. I also booted into Safe Mode no problem, and scheduled a disk check on both of my drives (I dual boot XP & 7). I was feeling good, and tried putting my regular video card back in, and the monitor won't display anything with it. Also, even though the monitor displays nothing, the system sounds like it's booting up. However, I hear a clicking in one of my hard drives that isn't there with the older video card. Could this be a problem with my hard drive, video card, or PSU? PSU makes sense, except for the fact I've been using the same setup for over a year, and the video card doesn't require it's own power plug thing.

  Read the article

• In search of a network file system with extended caching to speed up file access

  - by Brecht Machiels

  I'm running a small home server that stores my documents. The disks in this server are in a RAID 1 configuration (using Linux md) and it's also periodically being backup up to an external hard drive to make sure I don't lose them. However, I'm always accessing the files from other computers on the home network using an SMB share, and this results in a considerable speed penalty (especially when connected over WLAN). This is quite annoying when editing large files, such as digital camera RAWs, for example. I've been looking for a solution to this problem. It would have to offer some kind of local caching to speed up the file access. The client would preferably not keep a copy of all data on the server, as it consists of a very large collection of photographs, most of which I will not access frequently. Instead, it should only cache the accessed files and sync the changes back in the background. Ideally, it would also do some smart read-ahead (cache the files that are in the same directory as the currently opened file, for examples), but I suppose that's asking a bit much. Synchronization should be automatic (on file change). Conflicting file changes (at the same time on different clients) are unlikely to happen in my use case, but I would prefer if they are handled properly (notification to the user). I've come across the following options, so far: something similar to Dropbox. iFolder seems to be the only thing that comes close, but its reputation (stability) and requirements put me off. A distributed file system such as OpenAFS. I'm not sure this will speed up file access. It is probably overkill for what I need. Maybe NFS or even Samba offer these possibilities. I read a bit about Windows' Offline Files, but its operation seems limited (at least on Windows XP). As this is just for personal use, I'm not willing to spend a lot of money. A free solution would be preferred. Also, the server needs to run on Linux, and I need a client for at least Windows.

  Read the article

• Why do I see a large performance hit with DRBD?

  - by BHS

  I see a much larger performance hit with DRBD than their user manual says I should get. I'm using DRBD 8.3.7 (Fedora 13 RPMs). I've setup a DRBD test and measured throughput of disk and network without DRBD: dd if=/dev/zero of=/data.tmp bs=512M count=1 oflag=direct 536870912 bytes (537 MB) copied, 4.62985 s, 116 MB/s / is a logical volume on the disk I'm testing with, mounted without DRBD iperf: [ 4] 0.0-10.0 sec 1.10 GBytes 941 Mbits/sec According to Throughput overhead expectations, the bottleneck would be whichever is slower, the network or the disk and DRBD should have an overhead of 3%. In my case network and I/O seem to be pretty evenly matched. It sounds like I should be able to get around 100 MB/s. So, with the raw drbd device, I get dd if=/dev/zero of=/dev/drbd2 bs=512M count=1 oflag=direct 536870912 bytes (537 MB) copied, 6.61362 s, 81.2 MB/s which is slower than I would expect. Then, once I format the device with ext4, I get dd if=/dev/zero of=/mnt/data.tmp bs=512M count=1 oflag=direct 536870912 bytes (537 MB) copied, 9.60918 s, 55.9 MB/s This doesn't seem right. There must be some other factor playing into this that I'm not aware of. global_common.conf global { usage-count yes; } common { protocol C; } syncer { al-extents 1801; rate 33M; } data_mirror.res resource data_mirror { device /dev/drbd1; disk /dev/sdb1; meta-disk internal; on cluster1 { address 192.168.33.10:7789; } on cluster2 { address 192.168.33.12:7789; } } For the hardware I have two identical machines: 6 GB RAM Quad core AMD Phenom 3.2Ghz Motherboard SATA controller 7200 RPM 64MB cache 1TB WD drive The network is 1Gb connected via a switch. I know that a direct connection is recommended, but could it make this much of a difference? Edited I just tried monitoring the bandwidth used to try to see what's happening. I used ibmonitor and measured average bandwidth while I ran the dd test 10 times. I got: avg ~450Mbits writing to ext4 avg ~800Mbits writing to raw device It looks like with ext4, drbd is using about half the bandwidth it uses with the raw device so there's a bottleneck that is not the network.

  Read the article

• Windows 7 playback of dvr-Microsoft files stutters

  - by Jim Lynn

  I've just had to install Windows 7 on my Media Center machine because my Vista installation had a faulty drive. I've got the latest drivers that I can find - Intel 945GM integrated Graphics, Realtek audio drivers. Things are working OK with one exception. Playback of old recordings, from dvr-Microsoft format files, is choppy. The picture freezes for a fraction of a second, then quickly catches up. The sound is uninterrupted and doesn't pause. These freezes happen once every 5 seconds or so. It's very regular. Playback of Live TV from the digital tuner is perfectly smooth. DVD playback is perfectly smooth. As an experiment, I used the MPEG editing package VideoReDo to create a small test file in three different formats. This program takes the raw MPEG streams and repackages them into the desired container. I took the same clip and created three files in three formats: dvr-Microsoft (Microsoft's old recorded TV format); mpg (standard MPEG); and ts (raw MPEG transport stream of the kind often produced by PVRs). When these three files are played back under Windows 7, the mpg and ts files play smoothly, but the dvr-Microsoft file stutters. The last piece of data I have is that two other Windows 7 machines can play back dvr-Microsoft files smoothly with no stuttering. One is a netbook, with less grunt than the media centre. So there must be something specific about my Media Center machine that's causing the problem. Does anyone have any idea where I can look now? I don't know much about AV software, codecs, filter graphs etc. but I suspect that's where the problem lies. Rendering the video isn't the problem, but extracting the streams is. How would I go about diagnosing the problem? Edited to add: I just used the GraphStudio tool to look at the filter graph on the offending PC. The filter graph it uses by default for dvr-Microsoft looks identical to the other machines, and, interestingly, when I play the files using GraphStudio they run smoothly. Under Windows Media Player and Windows Media Center they stutter. I'd like to see the filter graph for Windows Media Player but GraphStudio won't show it. It looks like Windows Media Player and WMC are using a different decoding path to GraphStudio. Edited again to add: Today I purchased a new HDTV. The same Media Center driving the TV at 1080p is now playing back the old Recorded TV files smoothly, without stuttering. So whatever the cause of the original problem, using a different resolution seems to have removed the problem. It might also explain why nobody else has had this problem. I doubt many people use Media Centre with a 14in portable TV.

  Read the article

• Slow Windows Explorer on Windows 7

  - by MadBoy

  I have Laptop with i7 (4 cores), 8GB ram and SSD OCZ Vertex 3 MaxIOPS which in testing that I did just now does 400mb/s+ read/write. However the responsiveness of Windows Explorer is far from being perfect. Opening up Computer, Documents, going into folders is very slow (1-5seconds). I don't have any viruses or spyware and I have tried changing properties to optimize view for General Items. I tried disabling Search Indexer but it made search in Outlook 2010 crawl and didn't bring any other effect. Even double clicking on file takes some time to open things up (like clicking a Word document). I don't have any drives mapped, my computer is not joined to domain. I have multiple VPN connections that I connect to but they all have disabled default gateways. I tried using CC Cleaner or some Windows 7 Tweaks app to disable some things. I am power user using Visual Studio, Tortoise SVN and other developer/administration apps. Any non obvious ideas? Edit: So I've been trying to pinpoint where the issue comes from and it seems that straight after reboot Windows Explorer opens very fast, when I load 3-4 programs (Royal TS, Visual Studio, Outlook) it's noticeably slower and the more programs I have it gets worse. After I start closing programs it starts working better and if I leave 2 open it's fast again. I tried doing some research with DiskMon and other programs from sysinternals but couldn't find anything suspicious. Below are stats during normal usage with a lots of programs open: - Ram usage with a lot of programs open and no swap file (i disabled it for testing): 6.95GB - CPU usage: 15%, none of the cores takes more then 50% (I have VS 2010 open x 4) HD Tune Pro: OCZ-VERTEX3 MI Benchmark Test capacity: full Read transfer rate Transfer Rate Minimum : 363.9 MB/s Transfer Rate Maximum : 505.5 MB/s Transfer Rate Average : Access Time : Burst Rate : CPU Usage : HD Tune Pro: OCZ-VERTEX3 MI File Benchmark Drive C: Transfer rate test File Size: 500 MB Sequential read 484102 KB/s Sequential write 444714 KB/s Random read 7779 IOPS Random write 16888 IOPS Random read (queue depth = 32) 73007 IOPS Random write (queue depth = 32) 69790 IOPS HD Tune Pro: OCZ-VERTEX3 MI Random Access Test capacity: full Read test Transfer size operations / sec avg. access time max. access time avg. speed 512 bytes 3260 IOPS 0.306 ms 2.106 ms 1.592 MB/s 4 KB 4161 IOPS 0.240 ms 2.006 ms 16.256 MB/s 64 KB 2382 IOPS 0.419 ms 2.367 ms 148.934 MB/s 1 MB 449 IOPS 2.225 ms 4.197 ms 449.407 MB/s Random 809 IOPS 1.235 ms 6.551 ms 410.527 MB/s HD Tune Pro: OCZ-VERTEX3 MI Extra Tests Test capacity: full Random seek 3975 IOPS 0.252 ms 1.941 MB/s Random seek 4 KB 4245 IOPS 0.236 ms 16.583 MB/s Butterfly seek 4086 IOPS 0.245 ms 1.995 MB/s Random seek / size 64 KB 3812 IOPS 0.262 ms 58.606 MB/s Random seek / size 8 MB 120 IOPS 8.348 ms 485.737 MB/s Sequential outer 4524 IOPS 0.221 ms 282.721 MB/s Sequential middle 4429 IOPS 0.226 ms 276.818 MB/s Sequential inner 5504 IOPS 0.182 ms 344.000 MB/s Burst rate 4472 IOPS 0.224 ms 279.475 MB/s

  Read the article

• Windows Media Player Object with Video_TS Files - No Sound Anymore

  - by user1624184

  I copied a bunch of my DVDs (yes, owned) to a drive and created a basic webpage to be able to search and play them. I am using the code at the bottom to create a Windows Media Player object and then play the video. The video files are pulled off the DVD in the original format so each movie has files like this: VTS_01_0.BUP VTS_01_0.IFO VTS_01_1.VOB VTS_01_2.VOB VTS_01_3.VOB VTS_01_4.VOB VTS_01_5.VOB VTS_01_6.VOB This all worked great until just recently. On my dev machine, I can play the videos but now, all of a sudden, there is no sound. I have tried the following but no luck: The video is not muted and the sound is at 50% Under the sound icon, under mixer, I checked IE and it is fine Sound works fine using another program, says WinAmp Opening Windows Media Player directly from the Start Menu and then playing the same movie works fine and I get sound I ensured that the option in IE to play sound on websites is checked I can play sound on other people's websites where they have embedded WMP files I tried resetting all of the IE settings on the Advanced tab in IE I tried my website, with my code below on another computer, AND IT WORKS FINE! I tried copying the media files listed above from the computer that works fine to my dev computer and it still doesn't work. If I try using a ".wmv" file, the sound does work By the way, I am using Win7 with IE8. As you can see, this is driving me crazy! Why would it stop working on my one computer and the same code and files work fine on another computer? Any help would be greatly appreciated. <OBJECT id="mediaPlayer" width="640px" height="480px" style="position:absolute; left:0px; top:0px;" CLASSID="CLSID:6BF52A52-394A-11d3-B153-00C04F79FAA6" type="application/x-oleobject"> <PARAM NAME="URL" VALUE="E:\test\VIDEO_TS\VIDEO_TS.IFO" /> <PARAM NAME="SendPlayStateChangeEvents" VALUE="True"/> <PARAM NAME="AutoStart" VALUE="True"/> <PARAM NAME="uiMode" VALUE="full"/> <PARAM NAME="volume" VALUE="50" /> <PARAM NAME="PlayCount" VALUE="9999"/> <PARAM NAME="fullScreen" VALUE="true"/> <PARAM NAME="enableContextMenu" VALUE="true"/> </OBJECT>

  Read the article

• What "pieces" are needed in order to set up a cluster of physical servers?

  - by Chris Dutrow

  Background: Currently, we use Rackspace cloud servers. We have no intention to stop using them, but would like to look into setting up a cluster of physical servers (probably desktop computers in the $400 range with 8gb memory each) to offset some of our load and work as a secondary, more powerful, less reliable system. To put things in perspective, we can buy comparable desktop computers for the same price as we pay in one month to rent them on Rackspace Cloud. I understand that this is generally a dumb idea. However, in this particular instance, the server cluster is needed for its computation power. It is not mission-critical, it does not host a consumer-facing website, and if it goes down for a day or two, its not really a problem. Currently, we have access to business class verizon fios. If I understand correctly, we can get at least 25 dedicated IP addresses with this service, this should be enough. Requirements: Each server runs Linux Centos 6.3 Some of the servers run Python and execute processes from a task queue (Redis or RabbitMQ) Some of the servers are capable of serving static files and Python driven REST APIs Some of the servers host a Cassandra database cluster One or more of the servers are a Redis database servers One or more of the servers are PostgreSQL servers Questions: What kind of router or switch is needed? We would like the computers to be able to communicate effectively with each other via internal IP addresses. This is especially important for communicating with servers hosting Redis that need to be able to respond to requests very quickly. Are there special switches or routers that need to be used to connect the servers together? Are Desktop computers ok for this? We have found that we are mostly RAM-bottle necked, I understand that some servers have highly superior CPUs, but I'm not sure we need CPU power as much as we need RAM, which is cheap in Desktop computers. Will we have problems with the WIFI cards in the desktops or any other unexpected hardware limitation? What tools should be used to "image" the servers. For example, when we get an installation right for a Redis server or Cassandra node, are there tools that come with Linux Centos 6.3 to image the server to a USB drive or something like that? Or do we need to use some other software for this? What other things are we missing that we should be concerned about? Thanks so much!

  Read the article

• Ubuntu Newbie Needs Assistance!!

  - by Steve Greene

  New Ubuntu User Needs Help!- version 9.10 does not communicate with laptop Hello folks, Several days ago, I installed Ubuntu 9.10 onto my Acer Aspire 3100 laptop, running it alongside Widows Vista as a dual-bootable system. Creation of the Ubuntu boot CD went fine, and the installation onto my hard drive was flawless. Ubuntu opens and behaves as I would expect, except for one little problem. For reasons unknown to me, Ubuntu is not communicating with my laptop's networking hardware, and I have no internet connectivity, even when sitting directly under the wireless router at the local library (literally), which puts out a wickedly-fast signal that my Windows Vista OS auto-detects and immediately connects to. Up in the right side of the Ubuntu desktop, I click on the network icon and it does not show a wireless connection at all, even though I am only a few feet from the router. At home, where I use a dialup modem, I also see no means of getting online. My modem is an HDAUDIO Soft Data Fax Modem with Smart CP,manufactured by CXT (Conexant Systems Inc., file version 4.0.13.0, and the driver version is 7.58.0.0). I desparately wish to convert to Ubuntu. I used Mac for ten years, and then Windows for ten years. Now, after 20 years, I want to live out my days as an open-source Ubuntu fanatic. I am ready to give the old status quo the boot! I am an advanced computer user, but I am not a programmer. I seek a solution that is user-friendly for normal people, something equivalent to a driver that I can easily install or activate that will allow Ubuntu to see my hardware and get me connected. Can anyone help me over this hopefully-little glitch so that I can move on in total Ubuntu bliss? My processor is a Mobile AMD Sempron Processor 3500+ at 1.80 GHz, 1.50 GB RAM, and a 32-bit Operating System. I am running Windows Vista Home Basic, Service Pack 2. My current email is [email protected] if you have a workable solution that does not require programmer status to implement. Surely this must be a simple fix that I simply am overlooking, but being the new guy on the block, I have yet to be enlightened. Thanks for your help in coming up to speed!! Steve Wanna' be Ubuntu Fanatic "If you're not living on the edge, you're taking up too much space."

  Read the article

• IIS URL Rewrite - Redirect any HTTPS traffic to sub-domain

  - by uniquelau

  We have an interesting hosting environment that dictates all secure traffic must travel over a specific sub domain. E.g. http://secure.domain.com/my-page I'd like to handle this switch using URL Rewrite, i.e. at server level, rather than application level. My cases are: https://secure.domain.com/page = NO CHANGE, remains the same https://domain.com/page = sub-domain inserted, https://secure.domain.com/page https://www.domain.com/page = remove 'www', insert sub-domain In my mind the logic is: INPUT = Full Url = http://www.domain.com/page If INPUT contains HTTPS Then check Full URL, does it contain 'secure'? If YES do nothing, if no add 'secure' If INPUT contains 'www' remove 'www' The certificate is not a wild card (e.g. top level domain) and is issues to: https://secure.domain.com/ The website could also be hosted in a staging environment. E.g. https://secure.environment.domain.com/ I do not have control over 'environment' or 'domain' or the 'tld'. Laurence - Update 1, 19th August So as mentioned below, the trick here is to avoid a redirect loop that could drive anyone well loopy. This is what I propose: One rule to force certain traffic to the secure domain: <rule name="Force 'Umbraco' to secure" stopProcessing="true"> <conditions logicalGrouping="MatchAll"> <add input="{REQUEST_URI}" pattern="^/umbraco/(.+)$" ignoreCase="true" /> <add input="{HTTP_HOST}" negate="true" pattern="^secure\.(.+)$" /> </conditions> <action type="Redirect" url="https://secure.{HTTP_HOST}/{R:0}" redirectType="Permanent" /> </rule> Another rule, that then removes the secure domain, expect for traffic on the secure domain. <rule name="Remove secure, expect for Umbraco" stopProcessing="true"> <match url="(.*)" ignoreCase="true" /> <conditions logicalGrouping="MatchAll"> <add input="{HTTP_HOST}" pattern="^secure\.(.+)$" /> <add input="{REQUEST_URI}" negate="true" pattern="^/umbraco/(.+)$" ignoreCase="true" /> </conditions> <!-- Set Domain to match environment --> <action type="Redirect" url="http://staging.domain.com/{R:0}" appendQueryString="true" redirectType="Permanent" /> </rule> This works for a single directory or group of files, however I've been unable to add additional logic into those two rules. For example you might have 3 folders that need to be secure, I tried adding these as Negate records, but then no redirection happens at all. Hmmm! L

  Read the article

• Dual booting Windows 7 & 8.1, using the Windows 8 Startup Options Menu, when Windows 8.1 is already installed and you want to add Windows 7

  - by Josh

  There are many excellent guides out there that explain how to dual-boot Windows 7 & 8. However, they are written for people starting with a Windows 7 installation and add a Windows 8 installation to separate partition. From what I'm reading, following this procedure will result in Windows 8 installing and configuring the Startup Options Menu with an option to boot Windows 7 & 8. However, in my situation I have a Windows 8.1 machine that I want to install Windows 7 on, and enable dual-boot, where I can use the Startup Options Menu to select the OS to boot. I haven't been able to determine how to do this. From everything I've been able to find, it looks like if I install Windows 7, it is going to take over the boot loader process, and I won't have access to the Windows 8 "Startup Options Menu." This answer suggests I boot to VHD, but notes a drawback: You can't do this if the C:\drive is encrypted using ANY encryption shceme. Be that BitLocker or 3rd party. The location of the .VHD file you are booting to must reside on an unencrypted volume. Well, that's a bummer, because that's exactly what I wanted to do--I wanted my Windows 7 partition to be encrypted, and my Windows 8 partition to also be encrypted. The idea being that when OS was booted, it was completely locked out from accessing data on the other OS's partition. At this point, I'm thinking my only option is to install Windows 7, and then re-install Windows 8, which will give me the dual-boot option... am I right? Or is there a way to make this work. I'm thinking that I would need to figure out a process like this: Configure the Windows Startup Options Menu with a "blank" entry for Windows 7, pointing to an empty partition Insert the Windows 7 installation media, install Windows 7, and somehow restrict it to that partition (i.e., prevent it from "taking over" from the Startup Options Menu" Is this possible, and if so, how can I accomplish this? My concern is that if I simply install Windows 7 to a separate partition, Windows 7 will take over the entire boot process and I won't be able to get to my Windows 8 installation any more.

  Read the article

• Ubuntu 12.04 boot degraded raid

  - by beacon_bonanza

  I've installed Ubuntu 12.04.1 in a new server and set up the 4 hard drives with 3 RAID 1 devices, the configuration is such that the first two drives have md0 (swap space) and md1 (/) with the third and fourth drives having md2 (/var). I've been testing the operation under a drive failure and found that the system boots fine if I remove disk two but if I remove disk one then the system gets to grub and then just restarts. I'm confused as to why grub appears to be loading properly from disk two but then the boot fails. I've tried to copy the MBR from disk 1 to 2: dd if=/dev/sda of=/dev/sdb bs=512 count=1 but this didn't make a difference. Any ideas how to get it to boot from just the second disk? fdisk -l Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000ccfa5 Device Boot Start End Blocks Id System /dev/sda1 2048 31250431 15624192 fd Linux RAID autodetect /dev/sda2 * 31250432 3907028991 1937889280 fd Linux RAID autodetect Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000ccfa5 Device Boot Start End Blocks Id System /dev/sdb1 2048 31250431 15624192 fd Linux RAID autodetect /dev/sdb2 * 31250432 3907028991 1937889280 fd Linux RAID autodetect Disk /dev/sdd: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00035b05 Device Boot Start End Blocks Id System /dev/sdd1 2048 3907028991 1953513472 fd Linux RAID autodetect Disk /dev/sdc: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000c73aa Device Boot Start End Blocks Id System /dev/sdc1 2048 3907028991 1953513472 fd Linux RAID autodetect Disk /dev/md1: 1984.3 GB, 1984264208384 bytes 2 heads, 4 sectors/track, 484439504 cylinders, total 3875516032 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md2: 2000.3 GB, 2000263380992 bytes 2 heads, 4 sectors/track, 488345552 cylinders, total 3906764416 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md0: 16.0 GB, 15990652928 bytes 2 heads, 4 sectors/track, 3903968 cylinders, total 31231744 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000

  Read the article

• Abnormal hangs and restarts Ubuntu 8.04

  - by jai-ho

  Hi, I am using Ubuntu 8.04 LTS and seeing the following behaviors: The system hangs after a while and becomes completely unresponsive. The system sometimes restarts itself ! Can you please help me identify what is the problem? Also please mention where should I look for the possible cause of this error. Thanks. EDIT: Got the following from the dmesg output (the system got hung and had to restart) [ 15.452015] Driver 'sr' needs updating - please use bus_type methods [ 15.456882] Driver 'sd' needs updating - please use bus_type methods [ 15.457987] sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray [ 15.457993] Uniform CD-ROM driver Revision: 3.20 [ 15.458058] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 15.463028] sd 1:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 15.463051] sd 1:0:0:0: [sda] Write Protect is off [ 15.463055] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 15.463083] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 15.463151] sd 1:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 15.463167] sd 1:0:0:0: [sda] Write Protect is off [ 15.463171] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 15.463197] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 15.463202] sda:<5sr 0:0:1:0: Attached scsi generic sg0 type 5 [ 15.464634] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 15.470120] sda1 sda2 < sda5 [ 15.495536] sd 1:0:0:0: [sda] Attached SCSI disk [ 15.759549] Attempting manual resume [ 15.759554] swsusp: Resume From Partition 8:5 [ 15.759556] PM: Checking swsusp image. [ 15.759742] PM: Resume from disk failed. [ 15.779964] EXT3-fs: INFO: recovery required on readonly filesystem. [ 15.779970] EXT3-fs: write access will be enabled during recovery. [ 19.904204] kjournald starting. Commit interval 5 seconds [ 19.904235] EXT3-fs: sda1: orphan cleanup on readonly fs [ 19.904245] ext3_orphan_cleanup: deleting unreferenced inode 303260 [ 19.904304] ext3_orphan_cleanup: deleting unreferenced inode 303329 [ 19.932763] ext3_orphan_cleanup: deleting unreferenced inode 3801871 [ 19.932785] ext3_orphan_cleanup: deleting unreferenced inode 3801874 [ 19.932798] ext3_orphan_cleanup: deleting unreferenced inode 3801910 [ 19.951253] ext3_orphan_cleanup: deleting unreferenced inode 3801912 [ 19.951266] ext3_orphan_cleanup: deleting unreferenced inode 3801914 [ 19.951278] ext3_orphan_cleanup: deleting unreferenced inode 3959212 [ 19.951299] ext3_orphan_cleanup: deleting unreferenced inode 3959213 [ 19.960335] ext3_orphan_cleanup: deleting unreferenced inode 3959215 [ 19.963531] ext3_orphan_cleanup: deleting unreferenced inode 3801875 [ 19.963545] ext3_orphan_cleanup: deleting unreferenced inode 3663727 [ 19.963565] ext3_orphan_cleanup: deleting unreferenced inode 3663708 [ 19.963577] ext3_orphan_cleanup: deleting unreferenced inode 4072122 [ 19.963597] ext3_orphan_cleanup: deleting unreferenced inode 4072157 [ 19.968616] ext3_orphan_cleanup: deleting unreferenced inode 4072159 [ 19.970252] ext3_orphan_cleanup: deleting unreferenced inode 4072160 [ 19.970264] ext3_orphan_cleanup: deleting unreferenced inode 4072161 [ 19.992889] ext3_orphan_cleanup: deleting unreferenced inode 4072264 [ 19.992903] ext3_orphan_cleanup: deleting unreferenced inode 4072267 [ 19.999585] ext3_orphan_cleanup: deleting unreferenced inode 4072268 [ 20.008329] ext3_orphan_cleanup: deleting unreferenced inode 4072270 [ 20.008343] ext3_orphan_cleanup: deleting unreferenced inode 4072123 [ 20.008360] ext3_orphan_cleanup: deleting unreferenced inode 4072452 [ 20.008374] ext3_orphan_cleanup: deleting unreferenced inode 4072453 [ 20.008385] ext3_orphan_cleanup: deleting unreferenced inode 4072124 [ 20.008398] ext3_orphan_cleanup: deleting unreferenced inode 311574 [ 20.008413] ext3_orphan_cleanup: deleting unreferenced inode 967890 [ 20.008420] EXT3-fs: sda1: 28 orphan inodes deleted [ 20.008423] EXT3-fs: recovery complete. [ 20.082622] EXT3-fs: mounted filesystem with ordered data mode. [ 29.025379] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 29.187133] Linux agpgart interface v0.102 [ 29.225338] iTCO_vendor_support: vendor-support=0 [ 29.259662] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)

  Read the article

• SAS Expanders vs Direct Attached (SAS)?

  - by jemmille

  I have a storage unit with 2 backplanes. One backplane holds 24 disks, one backplane holds 12 disks. Each backplane is independently connected to a SFF-8087 port (4 channel/12Gbit) to the raid card. Here is where my question really comes in. Can or how easily can a backplane be overloaded? All the disks in the machine are WD RE4 WD1003FBYX (black) drives that have average writes at 115MB/sec and average read of 125 MB/sec I know things would vary based on the raid or filesystem we put on top of that but it seems to be that a 24 disk backplane with only one SFF-8087 connector should be able to overload the bus to a point that might actually slow it down? Based on my math, if I had a RAID0 across all 24 disks and asked for a large file, I should, in theory should get 24*115 MB/sec wich translates to 22.08 GBit/sec of total throughput. Either I'm confused or this backplane is horribly designed, at least in a perfomance environment. I'm looking at switching to a model where each drive has it's own channel from the backplane (and new HBA's or raid card). EDIT: more details We have used both pure linux (centos), open solaris, software raid, hardware raid, EXT3/4, ZFS. Here are some examples using bonnie++ 4 Disk RAID-0, ZFS WRITE CPU RE-WRITE CPU READ CPU RND-SEEKS 194MB/s 19% 92MB/s 11% 200MB/s 8% 310/sec 194MB/s 19% 93MB/s 11% 201MB/s 8% 312/sec --------- ---- --------- ---- --------- ---- --------- 389MB/s 19% 186MB/s 11% 402MB/s 8% 311/sec 8 Disk RAID-0, ZFS WRITE CPU RE-WRITE CPU READ CPU RND-SEEKS 324MB/s 32% 164MB/s 19% 346MB/s 13% 466/sec 324MB/s 32% 164MB/s 19% 348MB/s 14% 465/sec --------- ---- --------- ---- --------- ---- --------- 648MB/s 32% 328MB/s 19% 694MB/s 13% 465/sec 12 Disk RAID-0, ZFS WRITE CPU RE-WRITE CPU READ CPU RND-SEEKS 377MB/s 38% 191MB/s 22% 429MB/s 17% 537/sec 376MB/s 38% 191MB/s 22% 427MB/s 17% 546/sec --------- ---- --------- ---- --------- ---- --------- 753MB/s 38% 382MB/s 22% 857MB/s 17% 541/sec Now 16 Disk RAID-0, it's gets interesting WRITE CPU RE-WRITE CPU READ CPU RND-SEEKS 359MB/s 34% 186MB/s 22% 407MB/s 18% 1397/sec 358MB/s 33% 186MB/s 22% 407MB/s 18% 1340/sec --------- ---- --------- ---- --------- ---- --------- 717MB/s 33% 373MB/s 22% 814MB/s 18% 1368/sec 20 Disk RAID-0, ZFS WRITE CPU RE-WRITE CPU READ CPU RND-SEEKS 371MB/s 37% 188MB/s 22% 450MB/s 19% 775/sec 370MB/s 37% 188MB/s 22% 447MB/s 19% 797/sec --------- ---- --------- ---- --------- ---- --------- 741MB/s 37% 376MB/s 22% 898MB/s 19% 786/sec 24 Disk RAID-1, ZFS WRITE CPU RE-WRITE CPU READ CPU RND-SEEKS 347MB/s 34% 193MB/s 22% 447MB/s 19% 907/sec 347MB/s 34% 192MB/s 23% 446MB/s 19% 933/sec --------- ---- --------- ---- --------- ---- --------- 694MB/s 34% 386MB/s 22% 894MB/s 19% 920/sec 28 Disk RAID-0, ZFS 32 Disk RAID-0, ZFS 36 Disk RAID-0, ZFS More details: Here is the exact unit: http://www.supermicro.com/products/chassis/4U/847/SC847E1-R1400U.cfm

  Read the article

• Windows 7 laptop constantly dropping internet connection

  - by Corbin Holbert

  I have scoured the web for an answer and failed to find one. I am using a Toshiba Satellite laptop running Windows 7 64-Bit. I have the computer connected via Wifi. Now, I am no beginner with the Internet, or anything related to computers, as I have grown up teaching everyone around me how to use computers, and went to college for IT. Everything on my network works flawlessly at all times, except for this evil laptop. The worst part is that I fixed this once before a few years back and recently had to replace the hard drive and re-install the OS, but cannot for the life of me remember what I did to make this problem go away. I am in my browser, connected to the Internet. I click a link. Suddenly no internet access. All I do is click down on the WiFi connection in the task bar, disconnect and reconnect immediately. Internet is back the moment I hit "connect." I have read many people had the same issues as I am having, but they all had triggers or other network issues. I have no trigger (this happens literally five to six times per minute no matter what I am doing) and I have no problems with my router, modem, or any other devices or computers on said network. As I am a web designer, and like to test my work live at every turn- this is going to result in this laptop being in pieces if I can't get it fixed soon. If more info is needed, let me know and I will provide. Thanks for any help offered! EDIT: Network Card: Realtek RTL8188CE Wireless LAN 802.11n PCI-E NIC Network state reads as "No Internet Access" when the problem first occurs, then magically I have Internet access for about ten seconds once I disconnect and reconnect. I have turned off IPV6, I have turned off power saving options for the network adapter, no viruses. Any new ideas? Also, I had to disconnect and reconnect four times just to get to this edit screen- and will likely have to do the same just to post it- it's that bad.

  Read the article

• Cannot browse network shares in Windows Explorer, but paths are still accessible

  - by Jeff Lockhart

  Windows Explorer has somehow corrupted itself and I'm not sure how to fix this problem. My Windows installation has been in use for a few years with network shares setup and working. Recently, I noticed that a program that I use to save network share paths to a database was no longer opening the explorer window to browse the path. It usually opens to the last path saved, but now it was just not opening at all. When I go to Windows Explorer to browse the network share directly, I get the error \\SERVER is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The specified network provider name is invalid. The network shares are just shares on the server itself (once saved to the database, they're used on the server as well as clients to reach files). The strange thing is, the files are still accessible from the program that uses them if I type the network share path in manually. So it is only a problem with Windows Explorer browsing the path. The reason I think there is some sort of configuration or setting, possibly in the registry, corrupted is that when the problem first manifest itself, I was somehow able to open an explorer window to a network share path, but the breadcrumb in the address bar did not function properly. It duplicated the share name folder at the top of the breadcrumb stack and when I clicked the second of the duplicated share folder, it crashed explorer.exe. I haven't been able to browse any network share path since this happened. I have tried using the IP address directly \\192.168.1.# as well as \\localhost and neither of those work either. I have tried running sfc /scannow and it did not find any errors. I tried ipconfig /flushdns and this made no difference. Attempting to map the network share to a drive fails using either the explorer GUI or net use command. Is there some way to reset Windows Explorer somehow to resolve this? I'd really like to avoid reinstalling Windows entirely if I can.

  Read the article

• Are file access times not properly maintained in Mac OS X?

  - by Ether

  I'm trying to determine how file access times are maintained by default in Mac OS X, as I'm trying to diagnose some odd behaviour I'm seeing in a new MBP Unibody (running Snow Leopard, 10.6.2): The symptoms (drilling down to the specific behaviour that seems to be causing the issue): mutt is unable to switch to mailboxes which have recently received new mail mail is delivered by procmail, which updates the mtime of the mbox folder it is updating, but does not alter the atime (this is how new mail detection works: by comparing atime to mtime) however, both the mtime and atime of the mbox file is getting updated Through testing, it does not appear that atimes can be set separately in the filesystem: : [ether@tequila ~]$; touch test : [ether@tequila ~]$; touch -m -t 200801010000 test2 : [ether@tequila ~]$; touch -a -t 200801010000 test3 : [ether@tequila ~]$; ls -l test* -rw------- 1 ether staff 0 Dec 30 11:42 test -rw------- 1 ether staff 0 Jan 1 2008 test2 -rw------- 1 ether staff 0 Dec 30 11:43 test3 : [ether@tequila ~]$; ls -lu test* -rw------- 1 ether staff 0 Dec 30 11:42 test -rw------- 1 ether staff 0 Dec 30 11:43 test2 -rw------- 1 ether staff 0 Dec 30 11:43 test3 The test2 file is created with an old mtime, and the atime is set to now (as it is a new file), which is correct. However, test3 is created with an old atime, but is not set properly on the file. To be sure this is not just behaviour seen with new files, let's modify an old file: : [ether@tequila ~]$; touch -a -t 200801010000 test : [ether@tequila ~]$; ls -l test -rw------- 1 ether staff 0 Dec 30 11:42 test : [ether@tequila ~]$; ls -lu test -rw------- 1 ether staff 0 Dec 30 11:45 test So it would seem that atimes cannot be set explicitly (it is always reset to "now" when either mtime or atime modifications are submitted). Is this something inherent to the filesystem itself, is it something that can be changed, or am I totally crazy and looking in the wrong place? PS. the output of mount is: : [ether@tequila ~]$; mount /dev/disk0s2 on / (hfs, local, journaled) devfs on /dev (devfs, local, nobrowse) map -hosts on /net (autofs, nosuid, automounted, nobrowse) map auto_home on /home (autofs, automounted, nobrowse) ...and Disk Utility says that the drive is of type "Mac OS Extended (Journaled)".

  Read the article

< Previous Page | 423 424 425 426 427 428 429 430 431 432 433 434  | Next Page >