Search Results

Search found 1214 results on 49 pages for 'jack sparrow'.

Page 43/49 | < Previous Page | 39 40 41 42 43 44 45 46 47 48 49  | Next Page >

• Unable To Get Sound Working to External Speaker on HP TouchSmart 320 on 11.04 or 11.10

  - by Schof

  This is an HP TouchSmart 320, model number 320-1200m. I'm using Ubuntu 11.04. Hardware information: root@hp320:/home/mpower# aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Generic [HD-Audio Generic], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 root@hp320:~$ cat /proc/asound/card0/codec#0 | grep Codec Codec: IDT 92HD91BXX Sound to headphone jack works properly, but sound to built-in speakers does not work. I have installed Windows, and with Windows 7 installed, all audio hardware works properly, so this isn't a hardware fault. I've looked at https://help.ubuntu.com/community/HdaIntelSoundHowto and have been unable to find my card in http://www.kernel.org/doc/Documentation/sound/alsa/HD-Audio-Models.txt . I have tried adding almost every conceivable model in the line "options snd-hda-intel model=MODEL" line I added to /etc/modprobe.d/alsa-base.conf. Update 2011-11-09 2:31 PM PST: I've gone to Control Center - Sound Preferences to attempt settings that make sound work. The "Hardware" tab shows one device: "Internal Audio 1 Output / 1 Input Analog Stereo Duplex." There are two output profiles listed in the selection box at the bottom of the tag: Analog Stereo Duplex and Analog Stereo Output. Neither cause sound to emit from the speakers. I've also run alsamixer on the command-line and ensured that everything is set to maximum and nothing is muted. Update 2011-11-09 5:15 PM PST: I've replicated the exact same symptoms in 11.10. Update 2011-11-10 11:31 AM PST: I've filed a bug in launchpad: https://launchpad.net/ubuntu/+source/alsa-driver/+bug/888703

  Read the article

• Use two networks at the same time?

  - by Christopher

  I want to use Ubuntu 10.10 Server in a classroom, a computer lab whose bandwidth is provided by a local cable ISP. That's no problem, though the school network has an IP printer that I want to use. I cannot reach the printer through the cable Internet. But, I have two network cards. How is it possible to use both networks at once? eth0 (static 192.168.1.254) is plugged into a four-port router, 192.168.1.1. On the public side of the four-port router is Internet provided by the cable company. I also have the classroom workstations plugged into a switch. The switch is plugged into the four-port router. The whole classroom is wired into the cable Internet. The other NIC, eth1, could it be plugged into an Ethernet jack in the wall? It uses the school network, and I might receive by DHCP an IP address like 10.140.10.100, with the printer on maybe 10.120.50.10. I was thinking about installing the printer on the server so that it could be shared with the workstations. But how does this work? Can I just plug eth1 into the school network and access both LANs? Thanks for any insight

  Read the article

• Why is purchasing Microsoft licences such a daunting task? [closed]

  - by John Nevermore

  I've spent 2 frustrating days jumping through hoops and browsing through different local e-shops for VS (Visual Studio) 2010 Pro. And WHS (Windows Home Server) FPP 2011 licenses. I found jack .. - or to be more precise, the closest I found in my country was WHS OEM 2011 licenses after multiple emails sent to individuals found on Microsoft partners page. Question being, why is it so difficult to get your hands on Microsoft licenses as an individual? Sure, you can get the latest end user operating systems from most shops, but when it comes to development tools or server software you are left dry. And companies that do sell licenses most of the time don't even put up pricing or a self service environment for buying the licenses, you need to have an hawk's eye for that shiny little Microsoft partner logo and spam through bunch of emails not knowing, if you can count on them to get the license or not. Sure, i could whip out my credit card and buy the VS 2010 license on the online Microsoft Shop. Well whippideegoddamndoo, they sell that, but they don't sell WHS 11 licenses. Why does a company make it so hard to buy their products? Let's not even talk about the licensing itself being a pain.

  Read the article

• Enable multiple audio output on Windows 7

  - by patrick

  For Windows 7, 64 bit: I have a digital SPDIF output to my stereo, which controls speakers in other rooms. I also have a set of speakers connected to the regular audio jack at the computer. This allows me to send music to the kitchen while my child plays games on the computer. Works great. Except when I'm playing games and still want to listen to music. ;-D I know I can manually switch WMP to play through the speakers instead of SPDIF, but I was wondering if there's any way to enable simultaneous audio out in Windows 7? Virtual Audio Card is a non-starter because I'm running 64 bits and the VAC driver isn't signed.

  Read the article

• Speakers will not work after I use USB Headset

  - by Josh K

  I am trying to configure my SteelSeries Siberia V2 Frost USB Headset to work with my 2.0 speakers using a jack. My goal is to find a easy way (no restart) to switch playback from my headset and my speakers and vice-versa. If i plug my headset in and make it the default device then restart my application/web page then the sounds works out of headset. If I switch the default to my speakers and restart apps/web pages then sound does not play. I know my speakers are on because if I configure them through windows and test, the sounds play, and sounds also play when I test it through my audio manager. Even if I unplug my headset, I still cannot get sound out of my speakers unless I restart My audio manager is RealTek HD Audio Manager, Windows 7 x64. I have tried the speaker back, usb front. speaker front, usb in front port. I have not tried speaker back, usb back.

  Read the article

• Home PBX to answer/take external calls via PSTN

  - by ageis23

  I have a Thomson 585V6 router which has built in voip support. I want to be able to use a softphone to make calls. for example phone my dad's mobile. Any incomming calls to my normal bt number should be taken via my pc as well. What I have done so far: I've wired the pstn port on the router to the telephone jack. The router is connected to my pc. I have installed asterisk on the pc I want to take calls on. The sip client authenticates to the sip server. output from twinkle: Sun 22:46:45 home, registration succeeded (expires = 3600 seconds) how do I take external calls/ answer incoming calls from pstn?

  Read the article

• Effect of using dedicated NVidia card instead of Intel HD4000

  - by Sman789

  Short version: Can someone please advise me of the effect of adding a dedicated NVIDIA GeForce GT 630M card to an Ubuntu laptop in terms of power consumption and performance gains/losses when doing general productivity tasks and booting up. Also, how good are the closed source, open source, and Bumblebee drivers for these newer cards compared to support for the Intel HD4000? Long version/Background, if any info here is helpful: I'm thinking of ordering a laptop from PC Specialist (a UK company who actually sell machines without Windows pre-installed) with the following specifications: Genesis IV: 15.6" AUO Matte 95% Gamut LED Widescreen (1920x1080) Intel® Core™i5 Dual Core Mobile Processor i5-3210M (2.50GHz) 3MB 4GB SAMSUNG 1600MHz SODIMM DDR3 MEMORY (1 x 4GB) 120GB INTEL® 520 SERIES SSD, SATA 6 Gb/s (upto 550MB/sR | 520MB/sW) Intel 2 Channel High Definition Audio + MIC/Headphone Jack GIGABIT LAN & WIRELESS INTEL® N135 802.11N (150Mbps) + BLUETOOTH Now, as I want this laptop mainly for work and not for games, I would be more than content with the HD4000 integrated chip which comes with the processor. However, for compatibility reasons, I am not able to get the specs I want unless I choose a NVIDIA GeForce GT 630M 1GB graphics card, which I don't have a great deal of use for. I'm willing to buy it, however, as it's still cheaper than any other laptop with the specs I want. However, I know that Linux power management isn't fantastic with open-source graphics drivers, and I don't much about Bumblebee. Basically, whilst I'm happy to 'tolerate' the card being there, I don't want to experience any negative effects on the rest of my system (battery, performance etc) and if there are likely to be any, I might reconsider my purchase. So if anyone can advise me on the effects, I would be very grateful, since I doubt I can just turn the card off. Thankyou for any assistance :)

  Read the article

• Making my computer an iPhone music dock?

  - by deddebme

  Are there any application which lets me play the music in my iPhone through the USB cable? It will be very convenient if I can just dock the phone (while the music is playing), and the music will come out from the computer's speakers instead of the speaker in the iPhone. Edit 1: Stock iPhone dock does have a line-out jack, thanks SidneySM for reminding me. Now the problem is, even though I have select Line In as the Sound Input in Mac OSX, there is no sound coming out from the speaker. How do I make the Speaker output the Line In audio?

  Read the article

• Finding a job: feedback on my current prodicument and my relentless efforts [closed]

  - by Michael

  I am a very well rounded IT guy, with a passion for programming in particular. I have been through a BS program less the internship as I refuse to go lower than minimum wage (i.e. free) and/or such opportunities find the institution lacking. Since then, the catalog for my degree has changed, so I am making peace without it. I go up for job interviews and get myself no farther than a submitted resume. I have even changed my strategy and made this website: http://goo.gl/qqpN8 to showcase my highlights (but not at all exhaustive) for specific areas in the US and paid for classified ads. The 'internship' is notable as I am just trying to get my foot in the door. Because IT is so vast, with programming and engineering in particular, I spend my time researching the requirements for the job I am applying for. This has made me that well rounded guy I spoke of earlier, but has made me a victim of being a jack-of-all-trades; unfortunately being a master of none. I embrace my gung-ho attitude and find it to be a trait that has powered my career before. But I am starting to lose steam. I want it straight. What is not appealing about everything I am doing? What are the technologies that I need to focus on that are in great demand at the moment?

  Read the article

• What type of pattern would be used in this case

  - by Admiral Kunkka

  I want to know how to tackle this type of scenario. We are building a person's background, from scratch, and I want to know, conceptually, how to proceed with a secure object pattern in both design and execution... I've been reading on Factory patterns, Model-View-Controller types, Dependency injection, Singleton approaches... and I can't seem to grasp or 'fit' these types of designs decisions into what I'm trying to do.. First and foremost, I started with having a big jack-of-all-trades class, then I read some more, and some tips were to make sure your classes only have a single purpose.. which makes sense and I started breaking down certain things into other classes. Okay, cool. Now I'm looking at dependency injection and kind of didn't really know what's going on. Example/insight of what kind of heirarchy I need to accomplish... class Person needs to access and build from a multitude of different classes. class Culture needs to access a sub-class for culture benefits class Social needs to access class Culture, and other sub-classes class Birth needs to access Social, Culture, and other sub-classes class Childhood/Adolescence/Adulthood need to access everything. Also, depending on different rolls, this class heirarchy needs to create multiple people as well, such as Family, and their backgrounds using some, if not all, of these same classes. Think of it as a people generator, all random, with backgrounds and things that happen to them. Ageing, death of loved ones, military careers, e.t.c. Most of the generation is done randomly, making calls to a mt_rand function to pick from most of the selections inside the classes, guaranteeing the data to be absolutely random. I have most of the bulk-data down, and was looking for some insight from fellow programmers, what do you think?

  Read the article

• If you have the full spec done, what is left for the developer to do?

  - by Leeho

  I'm working in a small company, started as a developer and coded pieces of a big system being provided with detailed specs. Over five years I moved towards analyst position. I know how existing parts of the system are build, so when we need a new subsystem I know how to connect it to the existing things. So I analyse requirements for a new subsystem to be done, design a new module, then code main parts of it. After that me with my colleagues who are proper analysts write detailed specs for junior developers to finish the module. The problem is that I don't see a new job for myself. I realise that jack-of-all-trades isn't considered to be good, and I don't see getting myself a job exactly like this in a big company. But if I look for a developer job, then I would be somewhat like junior again? Because if I will be provided with detailed description of what software has to do, all that seems to be left for me is merely translating spec to the code, which is plain boring. But developer is considered to solve problems, so which problems are those supposed to be? Only pure technical problems I can imagine is performance optimization. So basically my question is - what problems developers are supposed to face and solve, if all decisions of how application should work to meet customers needs are considered to be an analyst job? What problems do you solve at work?

  Read the article

• Should Developers Perform All Tasks or Should They Specialize?

  - by Bob Horn

  Disclaimer: The intent of this question isn't to discern what is better for the individual developer, but for the system as a whole. I've worked in environments where small teams managed certain areas. For example, there would be a small team for every one of these functions: UI Framework code Business/application logic Database I've also worked on teams where the developers were responsible for all of these areas and more (QA, analsyt, etc...). My current environment promotes agile development (specifically scrum) and everyone has their hands in every area mentioned above. While there are pros and cons to each approach, I'd be curious to know if there are more pros and cons than I list below, and also what the generally feeling is about which approach is better. Devs Do It All Pros 1. Developers may be more well-rounded 2. Developers know more of the system Cons 1. Everyone has their hands in all areas, increasing the probability of creating less-than-optimal results in that area 2. It can take longer to do something with which you are unfamiliar (jack of all trades, master of none) Devs Specialize Pros 1. Developers can create policies and procedures for their area of expertise and more easily enforce them 2. Developers have more of a chance to become deeply knowledgeable about their specific area and make it the best it can be 3. Other developers don't cross boundaries and degrade another area Cons 1. As one colleague put it: "Why would you want to pigeon-hole yourself like that?" (Meaning some developers won't get a chance to work in certain areas.) It's easy to say how wonderful agile is, and that we should do it all, but I'm somewhat of a fan of having areas of expertise. Without that expertise, I've seen code degrade, database schemas become difficult to manage, hack UI code, etc... Let's face it, some people make careers out of doing just UI work, or just database work. It's not that easy to just fill in and do as good of a job as an expert in that area.

  Read the article

• What did Rich Hickey mean when he said, "All that specificity [of interfaces/classes/types] kills your reuse!"

  - by GlenPeterson

  In Rich Hickey's thought-provoking goto conference keynote "The Value of Values" at 29 minutes he's talking about the overhead of a language like Java and makes a statement like, "All those interfaces kill your reuse." What does he mean? Is that true? In my search for answers, I have run across: The Principle of Least Knowledge AKA The Law of Demeter which encourages airtight API interfaces. Wikipedia also lists some disadvantages. Kevlin Henney's Imperial Clothing Crisis which argues that use, not reuse is the appropriate goal. Jack Diederich's "Stop Writing Classes" talk which argues against over-engineering in general. Clearly, anything written badly enough will be useless. But how would the interface of a well-written API prevent that code from being used? There are examples throughout history of something made for one purpose being used more for something else. But in the software world, if you use something for a purpose it wasn't intended for, it usually breaks. I'm looking for one good example of a good interface preventing a legitimate but unintended use of some code. Does that exist? I can't picture it.

  Read the article

• How to fix unstable RJ45 jacks? [closed]

  - by BeemerGuy

  This is a little project I'm doing at home. I wanted to wire two rooms together (basically, the router is one room, and the switch is in the second room). So I ran a CAT5 between the two rooms, and wired an RJ45 jack in each room. I then hooked up the two jacks with two CAT5 cable to run it through the cable tester, and all 8 wires seem good. Now, when I connect the switch and the router, the connection is unstable -- I ping the router and it barely holds on for two pings before it disconnects, and stays in that unstable state. Just to make sure the router and the switch are ok, I connected them with long wire between the two rooms and the connection is absolutely stable, and pings continuously. What could be the cause for the unstable connection? Especially that it pings a few times, so there IS a connection. But why is it unstable? And how come the cable tester says it's ok, but it's unstable?

  Read the article

• Adobe Encore CS4 DVD Menu Button Not Functioning

  - by jchapa

  Hello, I've built a DVD in Adobe Encore CS4, and everything works great in the preview. However, when I go and burn to DVD, we have one issue. On the DVD menu, there are two text buttons, with no background when unselected, and have a background when selected. That allows the user to know which is selected. Like I said, everything works great in the preview, but the background that is supposed to appear when the button is selected does not. The buttons work, but there is no background when selected. Any ideas? Thanks, Jack

  Read the article

• In what fields do programming and Business Sciences intersect? [on hold]

  - by Alainus

  One note of clarification: I'm getting a lot of comments saying that this question is too personal, too relative, subjective, and that career-path questions get quickly deleted. This is not a question about me or my career. This question is just what the title says: What fields exist that converge programming and business. Now the question: I read this answer regarding off-topic questions, and I was afraid this might be, so I'll try to keep it general and helpful for others. Also, this one has a similar background but formulates a different question from it. I have a Business Administration degree, but I've programmed since I can remember, and it's been my only job for years. However, my problem is the same that the majority of "amateuressional" programmers have: - Incomplete knowledge of the fundamentals. - Anxiety to keep up. - Feeling of not making anything useful of "the other degree". - Afraid of finally becoming a jack of all trades (master of none). Which further studies (specific degrees or fields) exist that allow a person with a BS degree converge into a programming career, without having to sacrifice coding, allowing to further expand the knowledge of C.S. fundamentals, and also without completely sacrificing the first?

  Read the article

• Help me convert my gaming headset plugs (mic & stereo sound) to a single 2.5mm monaural plug

  - by Flotsam N. Jetsam

  I have a seldom used piece of computer hardware I'd like to connect a gaming headset to. The headset has two 3.5mm plugs (mic and sound) like this: The jack I need to plug into is a 2.5mm monaural (don't ask me why--I know it sounds goofy but it's for someone else who's very picky). I googled a few different ways but I could only find splitters such as this for going from 2 x 3.5mm to 1 3.5mm. If I could find one that could combine it properly to 1 3.5mm, I could then find a 3.5mm to 2.5mm adapter. I know I could probably vivisect and work something out, but I need it to be very clean. Any ideas?

  Read the article

• How can you convert audio (3.5mm) to S/PDIF?

  - by SSumner

  I have a monitor that I want to use as my 'TV' for my gaming system. I connect it via HDMI, so sound and video go through the monitor, but I want sound to my headphones, which travels via optical (S/PDIF) cable. The monitor (Dell U2713HM) has a 3.5mm audio jack on it for line out, but I couldn't find anything that simply plugs in an converts the analog audio signal to a digital one so I can plug in a S/PDIF cable. What sort of device do I need to do this? (I am not asking for shopping recommendations, merely what options allow this conversion. I would prefer the smallest option, as space is limited).

  Read the article

• functional requirements - use wording based on verbs?

  - by yas

  Question: Should the functional requirements in a requirements doc use wording based on verbs? Context: School assignment, working in a team, working through the SDLC. The requirements doc has been done and we are now into design. Problem: The requirements doc has an enumerated list of what I'd call features of the app - the functional requirements. In that list are things that I'd think of as "how's" rather than "what's" and now, trying to work on design, I feel like a part of design has been prematurely dictated. I've not done this before! To me, I should be dealing strictly with things that describe "what." Example of current: Pretend that the job is to make an omelet. Listing: crack the egg, break into bowl, scramble, etc.; crosses over the line into the territory of how. Along that track, so does wording like: create, generate, list, calculate, determine, validate, etc. - verbs, basically. Right now, I have a list of requirements that are partially rooted in verbs. My idea of a requirements doc for an omelet would be more like: has two eggs, x ounces of ham, x ounces of bacon, x ounces of montery-jack cheese, x ounces of cilantro, etc. - nothing but what (nouns). I might have, and could have, spoken up before finalizing the requirements doc if I'd had any experience.

  Read the article

• Desktop speakers with headphone port and separate volume controls

  - by Kevin L.

  I currently use the excellent Logitech X-230 desktop speaker/subwoofer set, which I love for the volume dial on the front which gives me a nice, quick, tactile control of my sound without requiring a remote or keyboard buttons or some awkward software slider. Additionally, there's a very convenient headphone jack right next to the volume dial but the volume dial only controls the speakers, leaving the headphones at full volume. The goal is to be able to adjust the sound in my headphones without having to fumble around and find an inline headphone volume control (and my current favorite pair doesn't even have one). Is anyone aware of a desktop speaker set that has convenient volume controls for both levels?

  Read the article

• when connected to vpn, can't access certain things

  - by shsteimer

  my companies vpn is not a standard windows vpn. It uses Juniper Networks and it intalls locally something called "Host Checker" prior to allowing me to connect. I have noticed 2 things that I can't access while on vpn. etrade.com - no idea why this specific website, but I can't get to it, maybe https? use of my magik jack - I'm assuming this is some sort of a port conflict issue. if im on a call when i connect, i lose all reception. if i try to make a call after conected, ic an't even get it to dial. Can anyone tell me how I would even begin to debug this. I expect if I call the help desk they won't be much help, but if I can tell them the specific problems of conflicts, maybe I have a chance of them working with me to get it working.

  Read the article

• Database for heat tolerances of various cables?

  - by I. F.

  Is there any kind of unified database of heat tolerances for networking cables? I've been setting up a number of home/small office networks lately and as a mostly-amateur I could really use some information on what is safe to run behind a radiator, next to a steam pipe, etc. The question I'm up against at the moment is: Can I run normal RJ11 phone line cable (from DSL modem to phone jack) behind a steam radiator without risking a fire? Unlike cat5, I could not find published standards for these, so I'm turning to experts with more experience. This is a cut-rate show. Do I go out and buy more cabling, and if so which, or use the spare that I have?

  Read the article

• Identifying a CAT6 cable in a bundle

  - by Jon Tackabury

  We had a contractor wire up our office with all the cables leading back to a central location. The only problem is that he didn't label anything, so we have no idea which cables go to which room. One end of the cable is terminated in a wall-jack (in the rooms), the other end is un-terminated and will be punched to a patch panel. Is there a way to identify the cables without having to terminate them? We'd like to group the cables on the patch panel by room, but I don't want to crimp/punch each cable twice. Thanks!

  Read the article

• How to switch easily between a 5.1 headset and 2.1 speakers ?

  - by Wookai

  I have a 5.1 headset that I mostly use for gaming and watching movies. It is connected using 3 jacks to the rear panel of my motherboard (plus one for the microphone). I also have some small 2.1 speakers that I sometimes use to listen to music or to share a video/movie with someone. For now, what I do is crawl under my desk, and switch the cables. As my motherboard has 7.1 capabilities, I am wondering if there could be a way of having all 4 jack cables always plugged in, and switching on which device to output the sound programmatically. Has anybody had a similar problem, and how did you solve it ?

  Read the article

• What You Said: Are You A Second Screen Multi-Tasker?

  - by Jason Fitzpatrick

  Earlier this week we asked you if you used a second screen while watching television or movies–such as a smartphone or tablet. Now we’re back to highlight how HTG readers are engaging (or disengaging) with their mobile devices. Image courtesy of Umani, a TV-companion application for iPad. By far and away the biggest trend was the use of the second screen as a filler for commercials and/or and outright diversion from lackluster programming. Jack in TN writes: Yes. I keep a laptop going 7×24 pretty much, and TV in going normally. Pretty much my ‘throne’ in the family room. I have almost always multi-tasked, before laptop it was a book or magazine or 3 at my side. My wife has accused me of using TV as a radio more than once, and I can’t say she is wrong. How to Get Pro Features in Windows Home Versions with Third Party Tools HTG Explains: Is ReadyBoost Worth Using? HTG Explains: What The Windows Event Viewer Is and How You Can Use It

  Read the article

< Previous Page | 39 40 41 42 43 44 45 46 47 48 49  | Next Page >