Search Results

Search found 9122 results on 365 pages for 'sound card'.

Page 43/365 | < Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >

  • 3½" PATA Western Digital Caviar SE (250MB) makes steady ticking sound when idle

    - by intuited
    I've started to notice a ticking sound emanating from my WD2500JB. It is not alarmingly loud. The sound seems to occur only when the drive has been idle for some time, and will cease upon (some?) disk activity. The sound has a regular, steady cadence of somewhere between about 4 and 6 ticks per second. I'm not entirely certain that it just started making these sounds, since I previously had the drive — mounted in a USB enclosure — stored out of earshot, and only recently moved it to where I can hear it. The SMART attributes for the drive do not indicate any problems. I did have some errors to clean up recently (since I started noticing the sounds). The errors occurred on an ext3 filesystem. The drive had been powered down while mounted a few times prior to that fsck. Is this cause for alarm? Should I scrap the drive on principle?

    Read the article

  • Sound very faint when watching a movie

    - by ldigas
    Why is it that when I watch (in KMPlayer for the sake of discussion, but it doesn't get any better on most other players I've tried either) a dvdrip movie (ac3, x264) the sound of people's voices is very faint, but the background sound is very loud. This is relatively new ... since in the "old days" the movies played ok. So it must be something with the encoding, or with the used player ? I'm playing it on windows xp on a cheap (i guess) laptop sound card. Nothing special.

    Read the article

  • 8400GS causes BSOD in Acer M1610 running Windows 7 32-bit

    - by Arch Angel
    Title says it all, just installed the Nvidia card, I know this is a driver related issue I just don't know how to fix it I cannot find a driver version that will work not even the one that windows selects for the card, or the one on the disk supplied with the card. Any help will be appreciated. BSOD output: What happens when I try to install Any driver that does install causes a BSOD the driver disk says it supports windows 7 and the drivers on the disk cause a BSOD too i'm at a loss of what to do. EDIT: Yes I uninstalled the intergrated drivers. PCIE x16 Card from Gainward Tried multiple driver versions Versions that wont install because they cannot pick up card 190.38, 191.07, 196.21, 197.45 Versions that install and cause BSOD 258.96, 260.99, The drivers on the disc (not sure of the version) and drivers from the gainward website (driver version 263.14)

    Read the article

  • How to implement smart card authentication with a .NET Fat client?

    - by John Nevermore
    I know very little about smart card authentication in general so please point out or correct me if anything below doesn't make sense. Lets say i have: A Certificate Authority "X"-s smart card (non-exportable private key) Drivers for that smart card written in C A smart card reader CA-s authentication OCSP web service A requirement to implement user authentication in a .NET fat client application via a smart card, that was given out by the CA "X". I tried searching info on the web but no prevail. What would the steps be ? My first thought was: Set up a web service, that would allow saving of (for example) scores of a ping pong game for each user. Each time someone tries to submit a score via the client application, he can only do so by inserting the smart card into the reader. Then the public key is read from the smart card by native c calls through .NET and sent to my custom web service, which in return uses the CA-s authentication OCSP web service to prove the validity of the public key/public certificate (?). If the public key is okay and valid, encrypt a random sequence of bytes with the public key and send it to the client application. If the client application sends back the correctly decrypted random sequence of bytes along with the score of the ping pong game, then the score is saved in the database for the given user. My question is, is this the correct way to do it ? What else should i know about smart card authentication ?

    Read the article

  • Prefered method for looping sound flash as3

    - by Brian Heylin
    Hi there, I'm having some issues with looping a sound in flash AS3, in that when I tell the sound to loop I get a slight delay at the end/beginning of the audio. The audio is clipped correctly and will play without a gap on garage band. I know that there are issues with sound in general in flash, bugs with encodings and the inaccuracies with the SOUND_COMPLETE event (And Adobe should be embarrassed with their handling of these issues) I have tried to use the built in loop argument in the play method on the Sound class and also react on the SOUND_COMPLETE event, but both cause a delay. But has anyone come up with a technique for looping a sound without any noticeable gap?

    Read the article

  • OpenSolaris / Nexenta problems with NetXen 4-port NIC card (ntxn driver)

    - by ewwhite
    Hello, I'm running NexentaStor Enterprise on an HP ProLiant DL180 G6 server. The onboard NIC interfaces surface as igb0 and igb1 and work well. However, I've added an HP NC375T 4-port network card using the NetXen 3031 chipset. This card should be handled by the ntxn driver in the SUNWntxn package, but that results in "ntxn0: failed to map doorbell" messages upon boot. The network interfaces don't show up. After some research, I found HP's driver package for the card. The release notes for the driver package state: This version of the Driver is supported only on Oracle Solaris 10 5/09 & 10/09. Oracle Solaris 10 5/09 & 10/09 contain an older version of NetXen P3 driver package called SUNWntxn. So, adding another version of NetXen P3 driver package using pkgadd command might result in conflicts with the NetXen driver binary & related files. Users are advised to uninstall native SUNWntxn driver package before installing the new package. The install completes, but I end up with a different set of errors in initializing the card. ifconfig ntxn0 plumb ifconfig: cannot open link "ntxn0": DLPI link does not exist dmesg output: Jan 29 07:20:17 ch-san2 ntxn: [ID 977263 kern.warning] WARNING: Memory not available Jan 29 07:20:17 ch-san2 ntxn: [ID 404858 kern.notice] NOTICE: ntxn0: Mac registration error Trying to manually create the device files: root@ch-san2:/volumes# add_drv -i "4040,100" ntxn ("ntxn") already in use as a driver or alias. Update the driver: root@ch-san2:/volumes# update_drv -f ntxn devfsadm: driver failed to attach: ntxn Warning: Driver (ntxn) successfully added to system but failed to attach Any ideas on how to get this driver working, or should I ditch the card and go with an Intel or something else?

    Read the article

  • Recovering Pictures & Movies from Formatted Memory Card

    - by Donotalo
    I thought I've copied all of the pictures and videos that I've taken using my digital camera Canon Digital IXUS 860 IS to my computer. Then I format the memory card. Then I found I didn't take all of the files! I don't have any other means of connecting the memory card to computer except via the camera. But the camera doesn't show it as a removable device directly in my computer so programs like Glary Utilities and PC Inspector didn't find the drive. I didn't take any picture after I formatted it. Is there any free software that can help me to get the pictures and videos? My memory card is an 4 GB SDHC card. Thanks.

    Read the article

  • I Can Edit SD Card on Windows XP but Not on Windows 7

    - by David C
    I have an 8GB SDHC card which I have used to upload pictures onto my Windows XP machine using an SD card reader ("SanDisk Ultra II"). I could also delete pictures and create folders on the card. I recently obtained a new computer that runs Windows 7 and, while I can view and upload the photos, I am unable to delete photos or create folders. When I attempt to do either of these two operations, the desired option does not appear in the menu ("Delete"/"New Folder"). Also, the shortcut keys do not work (e.g. the Delete key and Alt+F+W+F). I have attempted to change the Properties from Read-only, but am greeted with a "media is write protected". I should add that when I insert the Card Reader back into my Windows XP computer, I am granted full write permissions. Why can't I modify the SD Card from Windows 7? And, related, how can I fix this issue? Let me know if you have any additional questions. Thanks!

    Read the article

  • Sound Waves Visualized with a Chladni Plate and Colored Sand [Video]

    - by Jason Fitzpatrick
    This eye catching demonstration combines a Chladni Plate, four piles of colored sand, and a rubber mallet to great effect–watch as the plate vibrates pattern after pattern into the sand. A Chladni Plate, named after physicist Ernst Chladni, is a steel plate that vibrates when rubbed with a rubber ball-style mallet. Different size balls create different frequencies and each frequency creates a different pattern in the sand placed atop the plate. Watch the video above to see how rubber balls, large and small, change the patterns. [via Neatorama] Secure Yourself by Using Two-Step Verification on These 16 Web Services How to Fix a Stuck Pixel on an LCD Monitor How to Factory Reset Your Android Phone or Tablet When It Won’t Boot

    Read the article

  • Users Sound Off on Droid Android 2.1 Update Delay

    <b>Enterprise Mobile Today:</b> "The delayed Android 2.1 update for the Motorola Droid is starting to tarnish the successful launch of Verizon's first smartphone to run on Google's open source mobile operating system, according to posts at Motorola's Facebook page."

    Read the article

  • SPDIF passthrough not working in Windows 7

    - by adriangrigore
    Hi, I'm running Windows 7 on a computer with an Audigy Platinum eX sound card connected to a surround receiver via optical cabling. Sound works fine when listening to non-surround audio sources, such as windows sounds or MP3. However, when I view a DVD in Media Center and the SPDIF passthrough kicks in, I can only hear an awful noise instead of the movie soundtrack. Also, the receiver does not show the Dolby Digital or DTS symbol, but stays at Dolby Prologic, so it seems it doesn't identify the sound encoding properly. I could switch off SPDIF passthrough and use the sound card's decoder instead, but that's not an option for me since it would create more problems with regular MP3 playback via additional Stereo Receiver which is also connected to the same sound card. I've tried both the default Audigy drivers that come with Windows 7 and the latest drivers from the Soundblaster website, but the problem remains unchanged. Also, I have ensured that the receiver's Dolby Digital decoder is not broken by successfully connecting it to my PS3 to view a Dolby Digital DVD. Besides, SPDIF passthrough was working fine in Vista before I upgraded to Windows 7. Is there anything else I could try?

    Read the article

  • Atheros AR9485 wireless card doesn't work in an ASUS K53E

    - by John
    I just installed Ubuntu 11.10 32-bit version in dual boot mode on an ASUS K53. Every thing seems to work fine except for the wireless. The wireless works on Windows 7. Ubuntu finds the wireless card, but it does not appear to be turned on. The only physical means of turning on the card is the FN-F2 key combo. That works on Windows, but not in Ubuntu. I've looked in the forums for a solution and I'm not quite sure what to do. I've gathered the following information: jdwbmc@Spatha:~$ cat /etc/lsb-release; uname -a DISTRIB_ID=Ubuntu DISTRIB_RELEASE=11.10 DISTRIB_CODENAME=oneiric DISTRIB_DESCRIPTION="Ubuntu 11.10" Linux Spatha 3.0.0-12-generic #20-Ubuntu SMP Fri Oct 7 14:50:42 UTC 2011 i686 i686 i386 GNU/Linux jdwbmc@Spatha:~$ lspci -nnk | grep -iA2 net 02:00.0 Network controller [0280]: Atheros Communications Inc. AR9485 Wireless Network Adapter [168c:0032] (rev 01) Subsystem: AzureWave Device [1a3b:1186] Kernel driver in use: ath9k -- 04:00.0 Ethernet controller [0200]: Atheros Communications AR8151 v2.0 Gigabit Ethernet [1969:1083] (rev c0) Subsystem: ASUSTeK Computer Inc. Device [1043:1851] Kernel driver in use: atl1c jdwbmc@Spatha:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 058f:a014 Alcor Micro Corp. jdwbmc@Spatha:~$ iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thrff Fragment thrff Power Managementff jdwbmc@Spatha:~$ rfkill list all 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 1: asus-wlan: Wireless LAN Soft blocked: no Hard blocked: no jdwbmc@Spatha:~$ lsmod Module Size Used by parport_pc 32114 0 ppdev 12849 0 snd_hda_codec_hdmi 31426 1 bnep 17923 2 rfcomm 38408 0 bluetooth 148839 10 bnep,rfcomm snd_hda_codec_realtek 254125 1 binfmt_misc 17292 1 joydev 17393 0 asus_nb_wmi 12469 0 asus_wmi 19333 1 asus_nb_wmi sparse_keymap 13658 1 asus_wmi uvcvideo 67271 0 videodev 85626 1 uvcvideo snd_hda_intel 24262 2 snd_hda_codec 91754 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_i ntel snd_hwdep 13276 1 snd_hda_codec snd_pcm 80468 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13132 0 wmi 18744 1 asus_wmi snd_rawmidi 25241 1 snd_seq_midi snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event arc4 12473 2 i915 505108 3 snd_timer 28932 2 snd_pcm,snd_seq snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq ath9k 112711 0 psmouse 73673 0 serio_raw 12990 0 mac80211 272785 1 ath9k drm_kms_helper 32889 1 i915 ath9k_common 13599 1 ath9k drm 192226 4 i915,drm_kms_helper ath9k_hw 293893 2 ath9k,ath9k_common ath 19387 2 ath9k,ath9k_hw cfg80211 172392 3 ath9k,mac80211,ath snd 55902 14 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_i ntel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,s nd_seq,snd_timer,snd_seq_device soundcore 12600 1 snd snd_page_alloc 14115 2 snd_hda_intel,snd_pcm mei 36466 0 i2c_algo_bit 13199 1 i915 video 18908 1 i915 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp ahci 21634 3 libahci 25727 1 ahci atl1c 36638 0 xhci_hcd 72915 0 jdwbmc@Spatha:/var/lib/NetworkManager$ cat NetworkManager.state [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true jdwbmc@Spatha:~$ lspci -nn | grep 0280 02:00.0 Network controller [0280]: Atheros Communications Inc. AR9485 Wireless Network Adapter [168c:0032] (rev 01) Any help would be appreciated. Thanks.

    Read the article

  • Computer hangs at boot screen with new RAID card

    - by shanethehat
    I am trying to build a new server around a Biostar TH61 motherboard and an Adaptec 6405E RAID controller card. The machine booted fine from USB before the RAID card and drives were installed. After installing, on the first boot the card was detected, but then started to spit out the following message every 10 seconds: Error: Controller Kernel Stopped Running << Press any key to continue ... Following the troubleshooting guide I unplugged everything, reseated the card, and reattached all the drives. This time the machine is sitting on the boot screen without any error messages and flashing a cursor, but after 15 minutes of this, nothing seems to be happening. Given that there are no error messages I'm hesitant to reboot again. Is it normal for a RAID card to sit without a status message when it firsts boots, maybe to initialise the drives or something? The current screen output looks a bit like this: Controller #00 found at PCI Slot:01, Bus:01, Dev:00, Func:00 Controller Model: Adaptec 6405E Firmware Version: 5.2-0[18512] Memory Size: 128MB Serial number: 111111111111111 SAS WWN: 50000D1104AE9180 _ Update: So after waiting 30 minutes I've rebooted back to the Kernal Stopped Running error. Maybe time to update the RAID BIOS.

    Read the article

  • The Sound of Two Toilets Flushing: Constructive Criticism for Virgin Atlantic Complaints Department

    - by Geertjan
    I recently had the experience of flying from London to Johannesburg and back with Virgin Atlantic. The good news was that it was the cheapest flight available and that the take off and landing were absolutely perfect. Hence I really have no reason to complain. Instead, I'd like to offer some constructive criticism which hopefully Richard Branson will find sometime while googling his name. Or maybe someone from the Virgin Atlantic Complaints Department will find it, whatever, just want to put this information out there. Arrangement of restroom facilities. Maybe next time you design an airplane, consider not putting your toilets at a right angle right next to your rows of seats. Being able to reach, without even needing to stretch your arm, from your seat to close, yet again, a toilet door that someone, someone obviously sitting very far from the toilets, carelessly forgot to close is not an indicator of quality interior design. Have you noticed how all other airplanes have their toilets in a cubicle separated from the rows of seats? On those airplanes, people sitting in the seats near the toilets are not constantly being woken up throughout the night whenever someone enters/exits the toilet, whenever the light in the toilet is suddenly switched on, and whenever one of the toilets flushes. Bonus points for Virgin Atlantic passengers in the seats adjoining the toilets is when multiple toilets are flushed simultaneously and multiple passengers enter/exit them at the same time, a bit like an unasked for low budget musical of suddenly illuminated grumpy people in crumpled clothes. What joy that brings at 3 AM is hard to describe. Seats with extra leg room. You know how other airplanes have the seats with the extra leg room? You know what those seats tend to have? Extra leg room. It's really interesting how Virgin Atlantic's seats with extra leg room actually have no extra leg room at all. It should have been a give away, the fact that these special seats are found in the same rows as the standard seats, rather than on the cusp of real glory which is where most airlines put their extra leg room seats, with the only actual difference being that they have a slightly different color. Had you called them "seats with a different color" (i.e., almost not quite green, rather than something vaguely hinting at blue), at least I'd have known what I was getting. Picture the joy at 3 AM, rudely awakened from nightmarish slumber, partly grateful to have been released from a grayish dream of faceless zombies resembling one or two of those in a recent toilet line, by multiple adjoining toilets flushing simultaneously, while you're sitting in a seat with extra leg room that has exactly as much leg room as the seats in neighboring rows. You then have a choice of things to be sincerely annoyed about. Food from the '80's. In the '80's, airplane food came in soggy containers and even breakfast, the most important meal of the day, was a sad heap of vaguely gray colors. The culinary highlight tended to be a squashed tomato, which must have been mashed to a pulp with a brick prior to being regurgitated by a small furry animal, and there was also always a piece of immensely horrid pumpkin, as well as a slice of spongy something you'd never seen before. Sausages and mash at 6 AM on an airplane was always a heavy lump of horribleness. Thankfully, all airlines throughout the world changed from this puke inducing strategy around 1987 sometime. Not Virgin Atlantic, of course. The fatty sausages and mash are still there, bringing you flashbacks to Duran Duran, which is what you were listening to (on your walkman) the last time you saw it in an airplane. Even the golden oldie "squashed tomato attached by slime to three wet peas" is on the menu. How wonderful to have all this in a cramped seat with a long row of early morning bleariness lined up for the toilets, right at your side, bumping into your elbow, groggily, one by one, one after another, more and more, fumble-open-door-silence-flush-fumble-open-door, and on and on, while you tentatively push your fork through a soggy pile of colorless mush, fighting the urge to throw up on the stinky socks of whatever nightmarish zombie is bumping into your elbow at the time. But, then again, the plane landed without a hitch, in fact, extremely smoothly, so I'm certainly not blaming the pilots.

    Read the article

  • The Unintended Consequences of Sound Security Policy

    - by Tanu Sood
    v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} Author: Kevin Moulton, CISSP, CISM Meet the Author: Kevin Moulton, Senior Sales Consulting Manager, Oracle Kevin Moulton, CISSP, CISM, has been in the security space for more than 25 years, and with Oracle for 7 years. He manages the East Enterprise Security Sales Consulting Team. He is also a Distinguished Toastmaster. Follow Kevin on Twitter at twitter.com/kevin_moulton, where he sometimes tweets about security, but might also tweet about running, beer, food, baseball, football, good books, or whatever else grabs his attention. Kevin will be a regular contributor to this blog so stay tuned for more posts from him. When I speak to a room of IT administrators, I like to begin by asking them if they have implemented a complex password policy. Generally, they all nod their heads enthusiastically. I ask them if that password policy requires long passwords. More nodding. I ask if that policy requires upper and lower case letters – faster nodding – numbers – even faster – special characters – enthusiastic nodding all around! I then ask them if their policy also includes a requirement for users to regularly change their passwords. Now we have smiles with the nodding! I ask them if the users have different IDs and passwords on the many systems that they have access to. Of course! I then ask them if, when they walk around the building, they see something like this: Thanks to Jake Ludington for the nice example. Can these administrators be faulted for their policies? Probably not but, in the end, end-users will find a way to get their job done efficiently. Post-It Notes to the rescue! I was visiting a business in New York City one day which was a perfect example of this problem. First I walked up to the security desk and told them where I was headed. They asked me if they should call upstairs to have someone escort me. Is that my call? Is that policy? I said that I knew where I was going, so they let me go. Having the conference room number handy, I wandered around the place in a search of my destination. As I walked around, unescorted, I noticed the post-it note problem in abundance. Had I been so inclined, I could have logged in on almost any machine and into any number of systems. When I reached my intended conference room, I mentioned my post-it note observation to the two gentlemen with whom I was meeting. One of them said, “You mean like this,” and he produced a post it note full of login IDs and passwords from his breast pocket! I gave him kudos for not hanging the list on his monitor. We then talked for the rest of the meeting about the difficulties faced by the employees due to the security policies. These policies, although well-intended, made life very difficult for the end-users. Most users had access to 8 to 12 systems, and the passwords for each expired at a different times. The post-it note solution was understandable. Who could remember even half of them? What could this customer have done differently? I am a fan of using a provisioning system, such as Oracle Identity Manager, to manage all of the target systems. With OIM, and email could be automatically sent to all users when it was time to change their password. The end-users would follow a link to change their password on a web page, and then OIM would propagate that password out to all of the systems that the user had access to, even if the login IDs were different. Another option would be an Enterprise Single-Sign On Solution. With Oracle eSSO, all of a user’s credentials would be stored in a central, encrypted credential store. The end-user would only have to login to their machine each morning and then, as they moved to each new system, Oracle eSSO would supply the credentials. Good-bye post-it notes! 3M may be disappointed, but your end users will thank you. I hear people say that this post-it note problem is not a big deal, because the only people who would see the passwords are fellow employees. Do you really know who is walking around your building? What are the password policies in your business? How do the end-users respond?

    Read the article

  • Grab sound of a SDL game with ffmpeg/avconv

    - by Peregring-lk
    I'm trying to make a screencast of a SDL game which I developed some years ago, with the following command: sleep 5 && avconv -f x11grab -s 1366x768 -r 25 -i :0.0 -same_quant screen_cast.mkv (in this 5 seconds of sleep, I open the game). But the generated video (screen_cast.mkv) doesn't capture audio. I use for my game the SDL_Mixer library, with default configuration (22050 for frequency, AUDIO_S16SYS for format, and 2 channels). What's the problem? (with options -f alsa -i pulse it doesn't work either).

    Read the article

  • Nvidia Optimus shows Nvidia card is always active in Windows 8

    - by Ty Underwood
    I have loaded the new Asus Nvidia driver for my Asus Ux32VD that I have installed Windows 8 on. It has an Nvidia 620m and Intel hd 4000 integrated graphics. The problem is that the Optimus activity icon in my system tray shows that the Nvidia card is always active, though it shows that it is not doing anything. I can force the system to prefer the Intel graphics, and after rebooting, the Nvidia card will shut off, but then all the programs will be overridden and use the Intel graphics. Is anyone else having problems with Optimus in Windows 8? My battery life is really suffering because I'm always idling my Nvidia card while also presumably running the Intel card. Any suggestions would be appreciated.

    Read the article

  • How do ALSA and PulseAudio relate?

    - by Hanno Fietz
    While trying to get my sound to work, I was wondering about the roles of ALSA and PulseAudio. I have both installed and was wondering, for example, which of them needs to know about my sound card. Both seem to be able to use each other, there's a pulseaudio plugin for ALSA, and on my system, alsa shows up as a sound card in pulseaudio. Which of the two does what, are they alternatives or complementary?

    Read the article

  • Kubuntu solution for analysing/recording streamed flash audio?

    - by marcusw
    I have a Kubuntu system which I stream amateur radio sound to via a flash interface. I want to be able to record the sound that the flash player is making at the press of a button. I also need the capability to do (hopefully real-time) spectrum analysis on the sound. I need a program (a firefox add-on would be ideal) that can do this for me.

    Read the article

  • Restoring a SD card after using it to root a device

    - by Raz
    I recently purchased the Nook Touch reading device. I rooted it using the instructions on nookdevs.com Rooting included using win32diskimager to somehow transfer an .img file onto the card. Rooting is now completed and as far as I can tell, I don't need to keep the files used on the SD card, which has been reduced from a 3.5 GB or so unit to a 75 MB unit. Is there a simple way for me to somehow reformat the SD card to its original state or at least 3.5 GB. I cannot simply format it.

    Read the article

  • Configure Wireless Network Card

    - by Skizz
    I recently upgraded the wireless network card in my Ubuntu PC from an 802.11g to an 802.11n. Now, it can't see my router. It doesn't appear in the list of networks that is displayed when you click on the NetworkManager icon in Gnome. Other networks are listed and I have connected to them (no password required!). I'm using the Windows driver through ndiswrapper and it can see the card. I tested the card in a Windows PC and everything worked. The router's log doesn't show any messages coming from the wireless card. What have I done wrong? If you need any more information, just leave a comment and I'll get add it to the question.

    Read the article

  • Automatic switching between "digital output" (HDMI) and built-in speakers in Vista

    - by Laurence Gonsalves
    We occasionally connect my wife's laptop, which runs Vista, to our TV. Whenever we do this we have to manually switch the default audio output to "digital output" for the sound to go through the HDMI connection, and we also have to restart any apps that we want to send sound to the TV. We then have to perform a similar process when disconnecting. Is there any way to just have this be automatic? It seems absurd to have to do so much manual fiddling when a 40 year old transistor radio is "smart" enough to turn off the speakers and send sound to the headphones when headphones are plugged in. In case it helps, the name "RealTek" shows up in the sound card settings dialog.

    Read the article

  • 3 Ways to Normalize Sound Volume on Your PC

    - by Chris Hoffman
    If you’re constantly adjusting your computer’s volume while you watch videos or play music, there’s a better way. You can set a consistent volume level, either Windows-wide or in a specific program like VLC or your music player. Many applications have “volume normalization” or “loudness equalization” features built-in, including Windows itself. These features are often somewhat hidden and off the beaten path, so you won’t find them unless you go looking for them. HTG Explains: Why You Only Have to Wipe a Disk Once to Erase It HTG Explains: Learn How Websites Are Tracking You Online Here’s How to Download Windows 8 Release Preview Right Now

    Read the article

< Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >