Search Results

Search found 9122 results on 365 pages for 'sound card'.

Page 44/365 | < Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >

• Smart card driven membership and door entry system

  - by Rob G

  I'm looking at putting in a smart card driven system at my local sports club (which doesn't have oodles of money), and since they're willing to pay for hardware, and I'm willing to do the technical setup, I was wondering if anyone had any experience in setting something like this up. Writing any software needed is not the problem, I've pretty much got that covered with various open source projects out there and custom code I'll write, but it's more the hardware side I'm not too sure about and I'm looking for advice from people out there. I'm sure there are numerous complications, but on the surface it looks fairly simple. I'd basically like to enable members to swipe/touch a smart card at the door to gain entry to the club, walk up to a touch screen PC and swipe/touch a card reader there to "login" to the system I create, which will allow them to book club facilities etc. I may even want that same card to then activate things like lights or music when they enter the room they've booked. Pretty Eutopian I know, but still, we'd like to get as close as we can. As I said, the software shouldn't be a problem, and on the hardware side, so far I'm looking at: All in one touch screen PC running Windows 7 or Ubuntu USB card reader (not sure which one to buy) Smart Cards (again, never bought these before) Door/lighting hardware that could be triggered (not sure here either) If anyone has any advice on implementing something like this - especially the items I'm not sure about above, and of course anything I've missed out that's crucial, I'd be most grateful. Recommended hardware that you've used for something like this would be fantastic!

  Read the article

• Mercury and Sound Waves [Video]

  - by Jason Fitzpatrick

  In this video a tone generator is used to shoot specific frequencies through a large drop of mercury which results in a wide array of unique shapes and patterns created by standing waves–but really, you need to see it to appreciate it. The experiment, put together by Nick Moore, combines a glass dish, a drop of mercury, and a old tone generator to demonstrate standing waves in 3D. Check out the video above to see the experiment in full speed or hit up his YouTube channel to see a remix with music (and other cool science experiment videos). Mercury Hz [via Mental_Floss] How to Use an Xbox 360 Controller On Your Windows PC Download the Official How-To Geek Trivia App for Windows 8 How to Banish Duplicate Photos with VisiPic

  Read the article

• Problem installing skype on ubuntu 12.10 : Error in sound packages

  - by damned

  I tried to install Skype on my ubuntu 12.10 via command line $ sudo apt-get install skype I received this error : The following packages have unmet dependencies: libasound2-plugins:i386 : Depends: libasound2:i386 (>= 1.0.25) but it is not going to be installed skype-bin:i386 : Depends: libasound2:i386 (>= 1.0.23) but it is not going to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). When I tried the suggestion, $ sudo apt-get -f install I get the following error : Unpacking libasound2:i386 (from .../libasound2_1.0.25-3ubuntu3_i386.deb) ... dpkg: error processing /var/cache/apt/archives/libasound2_1.0.25-3ubuntu3_i386.deb (--unpack): trying to overwrite shared '/usr/share/alsa/alsa.conf', which is different from other instances of package libasound2:i386 No apport report written because MaxReports is reached already dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/libasound2_1.0.25-3ubuntu3_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) Configuration of my ubuntu is as follows : $ uname -a Linux sumitb-pc 3.5.0-21-generic #32-Ubuntu SMP Tue Dec 11 18:51:59 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux Please help me out here ! :)

  Read the article

• "Programming error" exceptions - Is my approach sound?

  - by Medo42

  I am currently trying to improve my use of exceptions, and found the important distinction between exceptions that signify programming errors (e.g. someone passed null as argument, or called a method on an object after it was disposed) and those that signify a failure in the operation that is not the caller's fault (e.g. an I/O exception). As far as I understand, it makes little sense for an immediate caller to actually handle programming error exceptions, he should instead assure that the preconditions are met. Only "outer" exception handlers at task boundaries should catch them, so they can keep the system running if a task fails. In order to ensure that client code can cleanly catch "failure" exceptions without catching error exceptions by mistake, I create my own exception classes for all failure exceptions now, and document them in the methods that throw them. I would make them checked exceptions in Java. Now I have a few questions: Before, I tried to document all exceptions that a method could throw, but that sometimes creates an unwiedly list that needs to be documented in every method up the call chain until you can show that the error won't happen. Instead, I document the preconditions in the summary / parameter descriptions and don't even mention what happens if they are not met. The idea is that people should not try to catch these exceptions explicitly anyway, so there is no need to document their types. Would you agree that this is enough? Going further, do you think all preconditions even need to be documented for every method? For example, calling methods in IDisposable objects after calling Dispose is an error, but since IDisposable is such a widely used interface, can I just assume a programmer will know this? A similar case is with reference type parameters where passing null makes no conceivable sense: Should I document "non-null" anyway? IMO, documentation should only cover things that are not obvious, but I am not sure where "obvious" ends.

  Read the article

• Ops Center 12c - Update - Provisioning Solaris on x86 Using a Card-Based NIC

  - by scottdickson

  Last week, I posted a blog describing how to use Ops Center to provision Solaris over the network via a NIC on a card rather than the built-in NIC.  Really, that was all about how to install Solaris on a SPARC system.  This week, we'll look at how to do the same thing for an x86-based server. Really, the overall process is exactly the same, at least for Solaris 11, with only minor updates. We will focus on Solaris 11 for this blog.  Once I verify that the same approach works for Solaris 10, I will provide another update. Booting Solaris 11 on x86 Just as before, in order to configure the server for network boot across a card-based NIC, it is necessary to declare the asset to associate the additional MACs with the server.  You likely will need to access the server console via the ILOM to figure out the MAC and to get a good idea of the network instance number.  The simplest way to find both of these is to start a network boot using the desired NIC and see where it appears in the list of network interfaces and what MAC is used when it tries to boot.  Go to the ILOM for the server.  Reset the server and start the console.  When the BIOS loads, select the boot menu, usually with Ctrl-P.  This will give you a menu of devices to boot from, including all of the NICs.  Select the NIC you want to boot from.  Its position in the list is a good indication of what network number Solaris will give the device. In this case, we want to boot from the 5th interface (GB_4, net4).  Pick it and start the boot processes.  When it starts to boot, you will see the MAC address for the interface Once you have the network instance and the MAC, go through the same process of declaring the asset as in the SPARC case.  This associates the additional network interface with the server.. Creating an OS Provisioning Plan The simplest way to do the boot via an alternate interface on an x86 system is to do a manual boot.  Update the OS provisioning profile as in the SPARC case to reflect the fact that we are booting from a different interface.  Update, in this case, the network boot device to be GB_4/net4, or the device corresponding to your network instance number.  Configure the profile to support manual network boot by checking the box for manual boot in the OS Provisioning profile. Booting the System Once you have created a profile and plan to support booting from the additional NIC, we are ready to install the server. Again, from the ILOM, reset the system and start the console.  When the BIOS loads, select boot from the Boot Menu as above.  Select the network interface from the list as before and start the boot process.  When the grub bootloader loads, the default boot image is the Solaris Text Installer.  On the grub menu, select Automated Installer and Ops Center takes over from there. Lessons The key lesson from all of this is that Ops Center is a valuable tool for provisioning servers whether they are connected via built-in network interfaces or via high-speed NICs on cards.  This is great news for modern datacenters using converged network infrastructures.  The process works for both SPARC and x86 Solaris installations.  And it's easy and repeatable.

  Read the article

• restarted my computer and my wireless icon was missing and my sound no longer works

  - by Justin Otto

  I recently updated to 12.04 on my sony vaio VGN-N110G. I've had ubuntu on this laptop since 10.04 and haven't had any real problems. so i restarted my computer today and none of the unity desktop background showed up only the desktop with the files on it so i brought up the terminal and entered in unity -replace and restarted it and it came back up fine except that i noticed that my panel only had mail, volume, date/time, and power icons no wireless or bluetooth, i tried a couple of approaches to try and get it working again i tried nm-applet --sm-disable and it brought up a warning message, i'm not very skilled in code even though i've had ubuntu for four years but in the past versions it wasn't too big a problem

  Read the article

• Create Sound and Video Presentation For Your Website

  The concept of web video production offers the business community an exciting opportunity to expand their reach. The technological advances in the speeds of internet transmission now make it possible to take the concept of marketing to another level. The availability of high quality video provides an efficient tool for business to reach an expanding customer base. This article will briefly discuss web video production.

  Read the article

• Network card dies when trying to wake up laptop from sleep

  - by Bugmaster

  I have a Dell XPS 1640 laptop (aka Dell Studio XPS 16), running Vista. Whenever the laptop wakes up from sleep, my Broadcomm LAN card immediately dies. Any attempt to access it completely locks up whichever program I use to access it. There appears to be no way to re-awaken the card, other than rebooting; note that Vista does not even shut down properly if some program is waiting for the card. So far, I have tried the following: Disabled the "allow your computer to shut down this device to save power" in the device properties. This had no effect. Attempted to disable and then enable the card in the device properties. No effect. Tried ipconfig /renew: this locks up ipconfig to the point where I can't even kill its process. Force-install updated drivers from broadcomm: no effect. Does anyone have any other ideas ?

  Read the article

• Error Formatting Memory Card

  - by Kirby Fromm

  I just tried to look at some of my pictures on my sony cyber-shot dsc-tx5, with a Lexar platinum II 16 GB memory stick, and it is now saying I have a formatting error every time I turn the camera on. The card and Camera are both 3 months old and have worked perfectly before. I tried to check the card on my computer and it says there is an error, so the camera is working but the card is not. Does anyone know how I can fix this to get the pictures off of the card?

  Read the article

• Issues in Fedora detecting on board NIC card

  - by Vivek27

  Basically I have two NIC cards (on-board + Added in PCI slot) on my Linux machine running Fedora 12.By default the OS detects the NIC card in the PCI slot but it fails to detect the on board network card.Following are few details of the same Linux Vivek 2.6.32.26-175.fc12.i686.PAE #1 SMP Wed Dec 1 21:45:50 UTC 2010 i686 i686 i386 GNU/Linux ifconfig -a doesen't show the on board NIC card.Any thoughts for it please? Since it is also related to network configuration. I posted it here.

  Read the article

• No audio driver for ECS 7050-M v1.0a for Windows 7?

  - by NudeRaider

  I have an Elitegroup 7050-M v1.0a motherboard and I've used the Realtek HD audio driver it came with for years under Windows XP. There was a nice mixer panel, an equalizer and sound profiles that added effects. All of these menus are gone now that I've moved on to Windows 7 64 Bit. All I have is the basic settings under system control - sound, but they are not nearly as detailed. To clarify: Sound works, but the advanced settings I got when using older OS's are gone. Older drivers don't seem to work under Win7 and I can't find one for Win7. So how can I fully utilize the capabilities of my HD sound chip under Win7?

  Read the article

• Weird noise coming out on Windows 7 when harddisk activity at peak?

  - by Curious Apprentice

  I'm having a very strange problem. I'm hearing a "choooooooooo kkkrrr" sound (Its not like the normal sound speakers make when powered on) all the time. When there is more Hard Disk r/w activity the sound increases and as HDD r/w activity slows down so the sound. I have two other OS installed on my system. I have tested, it only happens when I'm on Windows 7. I have no clue what the hell is happening !? Any help would be greatly appreciated. Here's the sample of noise: http://www.ziddu.com/download/20852917/noise.mp3.html

  Read the article

• DVI vs HDMI graphics card output

  - by Shack

  Asking on behalf of someone: I want to buy a new graphics card but do not know which would be best in terms of output, DVI or HDMI, the sound part of the HDMI is not really required, I just need something to go to my new 32 inch hd tv. It accepts both DVI and HDMI. I only need it for basic gaming but mostly as a media center to watch movies and tv shows on. Also for windows media center's TV application, I need a tv card, should I get a graphics card with bult in tv card, or a usb dongle??

  Read the article

• Two VGA monitors on Lenovo IdeaCentre H520 Desktop

  - by Sebastian-Laurentiu Plesciuc

  I recently bought a Lenovo IdeaCentre H520 computer and two VGA LED monitors. This particular PC has a dedicated NVIDIA Geforce GT630 video card and an integrated Intel HD Graphics 2500 video card. Both cards have VGA out. The Geforce card also has a HDMI out. I have installed Windows 8 and I can't seem to use both cards. I have connected both monitors, one to the VGA out of the Geforce card and one to the VGA out of the integrated card. I looked through the BIOS options for Video and I can only select the dedicated one, the integrate one or the Auto option. This kinda sucks. I was wondering what kind of options I have available. I have a VGA female to DVI A male adaptor, I was wondering if it could work if I can hook it to a DVI A female to HDMI male adaptor and plug one monitor into the VGA out of the Geforce video card and the other through both adapters to the HDMI out. Any chance this could work? I was looking online for a VGA to HDMI live cable but it's kind of expensive.

  Read the article

• At what point does the performance gap between GPU & CPU become so great that the CPU is holding back a system?

  - by Matthew Galloway

  I know that generally speaking for gaming performance the GPU is the primary factor which holds back performance, with everything else such as RAM/motherboard/PSU/CPU being secondary in importance to the graphics card. But at some point the other components ARE going to be significant in holding back the whole system! For instance nobody would be silly enough to play modern games with 512MB RAM and the very latest graphics cards (such as an HD7970) as I bet the performance increase over such a system with only 512MB but a mid range card would be non-existent! Thus it would be a "waste" for such a person to buy any high end graphics card without resolving first the system's other problems. The same point applies to other components, such as if it only had a Pentium II a current high end graphics card would be wasted on it! So my core question is how do you determine at what point for your system is spending on extra GPU power be completely "wasted"? (also, a slightly more nuanced question is trying work out at what point might the extra graphics power not be "wasted" but would be "sub optimal" value for money, when the expenditure should then be split around graphics card and other components. As obviously a gamer shouldn't always just spend on upgrading the graphics card! But needs to balance it out)

  Read the article

• Comparing 128MB GeForce 8600GT and 512MB Radeon X1650

  - by Synetech inc.

  Hi, I'm trying to determine which is the better of these two video cards: 128MB Nvidia GeForce 8600GT card while the other has a 512MB ATI Radeon X1650 card. Both cards are the upper-level mid-range versions of their respective series. On the one hand, the ATI has substantially more VRAM, but the Nvidia supports D3D 10 and SM4.0 as opposed to D3D 9.0c/SM3.0 that the ATI supports. Also, I have always heard better things about Nvidia cards compared to ATI cards. I'm trying to find some advice on which one is better, but I can't find any actual comparisons or anything for these specific cards (the comparisons I can find are only similar ones like the X1650 Pro or 8600GT PCI-E), so I figure that what I need to know is whether the extra VRAM is that important. Looking at the ATI table and the Nvidia table seems to indicate that the Nvidia is better, but then again, the Nvidia table also says that the GeForce 8600GT is a PCI-E card with at least 256MB even though the card in question is an AGP with 128MB. (:-?) (It looks like the ATI card is not supported in Windows 7 while the Nvidia card is, which I suppose is also a factor, though not quite as immediately relevant as performance.) Any ideas? Thanks a lot.

  Read the article

• Storing Credit Card Numbers in SESSION - ways around it?

  - by JM4

  I am well aware of PCI Compliance so don't need an earful about storing CC numbers (and especially CVV nums) within our company database during checkout process. However, I want to be safe as possible when handling sensitive consumer information and am curious how to get around passing CC numbers from page to page WITHOUT using SESSION variables if at all possible. My site is built in this way: Step 1) collect Credit Card information from customer - when customer hits submit, the information is first run through JS validation, then run through PHP validation, if all passes he moves to step 2. Step 2) Information is displayed on a review page for customer to make sure the details of their upcoming transaction are shown. Only the first 6 and last 4 of the CC are shown on this page but card type, and exp date are shwon fully. If he clicks proceed, Step 3) The information is sent to another php page which runs one last validation, sends information through secure payment gateway, and string is returned with details. Step 4) If all is good and well, the consumer information (personal, not CC) is stored in DB and redirected to a completion page. If anything is bad, he is informed and told to revisit the CC processing page to try again (max of 3 times). Any suggestions?

  Read the article

• Ubuntu Touch Porting - Audio

  - by user205695

  I'm currenty trying to port Ubuntu Touch to the Galaxy s4 International LTE (GI9505/ jfltexx). I've come to the point where I need to create a UCM directory but I don't know where and how I should call it. By "looking at /usr/share/alsa/ucm/apq8064-tabla-snd-card/" is the local Ubuntu PC directory or a directory on the downloaded CM meant? Same thing for "/proc/asound/cards" which should give a hint about what the directory should be called. 0 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xfb200000 irq 51 1 [NVidia ]: HDA-Intel - HDA NVidia HDA NVidia at 0xfb080000 irq 17 I dont think the directory should be called anything like this. Thanks for the help Robin Kertels

  Read the article

• How do I change which audio jacks are used for input and output?

  - by yamaha1996

  I'm using a Realtek HD audio card built-in my motherboard. The Windows driver comes with a control panel that allows me to select which back panel jacks are used for what. So for example I can make both the blue jack and green jack for output and only the red one for mic-in. (Whereas by default, the blue jack is for line in, which I never need.) How can I do the same under Linux? If possible, please don't suggest something that involves PulseAudio or JACK; I'd like to do it the plain way, e.g. by editing ALSA configuration files, if possible. The way I understand it, my problem should have nothing to do with software servers redirecting streams, just instructing the driver to treat this jack as so and so because it's hardware supported. Thank you very much!

  Read the article

• Chainload boot of Ubuntu installed on 32GB SD card from legacy Grub boot on USB

  - by Gary Darsey

  I have Ubuntu installed on a 32 GB SD card (in the Storage Expansion slot on an Acer Aspire One) with Grub2 installed in the same partition. I boot into legacy Grub on a USB drive and would like to boot by chainloading Grub2 from Grub (kernel/initrd or symlink booting would also be fine), but I haven't figured out how to do this from legacy Grub CLI. Output from blkid for this partition is /dev/mmcblk0p1: LABEL="Ubuntu" UUID="7ceb9fa7-238c-4c5d-bb8e-2c655652ddec" TYPE='ext4" / fdisk -lu information Boot indicator ID 83. Related entries in grub.cfg: search --no-floppy --fs-uuid --set-root 7ceb9fa7-238c-4c5d-bb8e-2c655652ddec linux /boot/vmlinuz-3.5.0-17-generic root=UUID=7ceb9fa7-238c-4c5d-bb8e-2c655652ddec... initrd /boot/initrd.img-3.5.0-17-generic I can't seem to replicate this in legacy Grub. Is there any way get Grub2 to chainload? How do I set root with UUID in legacy Grub? I prefer to boot from USB. Would Grub2 on USB (copying the grub.cfg generated during installation) be an option?

  Read the article

• What I need to know if I want credit card payments in an ecommerce website

  - by Andriane

  I live in Costa Rica (central america). I want to build an ecommerce website with credit card payments, I know Asp.NET and SQL Server 2008. I know paypal and the express checkout solution, but many people (and clients) here doesnt like it or dont use it. Paypal and Authorize.Net dont support countries of Latin America, so if you can tell me one company who can or what can I do to setup my shopping cart, im studing right now security and how to implement SSL certificates and encrypt sensible data and PCI compliance in some way. I need this for my own framework in ASP.NET and provide ecommerce solutions here in my country.

  Read the article

• gnome-shell failed to launch when dual monitor detected, nvidia card

  - by Terry Hu

  I installed a clean precise. I like gnome-shell so I installed it. It worked well with single monitor. But It does not work well when I go to office, plug my external monitor onto my laptop. I am using nvidia driver. Another colleague is using the same laptop, he can work well with dual monitors. His laptop is ATI graphic card. When I plug my extended monitor cable, I choose GNOME, but actually it goes to gnome 2 classic desktop environment, not GNOME 3. When I disconnect the extended monitor, restart X, I can login with GNOME3. Do I have to choose between GNOME3 and extended monitor? It's a hard choose.

  Read the article

• 12.04 Random sounds sometimes after startup

  - by Timothy Duane

  I'm not quite sure what the sound is, but it has only started happening in the last two days. The only way I can describe it would be that it sounds like a wooden xylophone being tapped lightly. It will play at random intervals ranging between 1 second to a couple minutes for up to a half hour (from what I have noticed) after startup. If anybody has any ideas as to what is causing this or how to fix it I would appreciate it. System information: Computer: Toshiba Satellite L655-S5160 Audio Driver: Conexant Audio Driver(v4.119.0.60; 07-14-2010; 41.89M)

  Read the article

• Wild card redirect in htaccess giving error this webpage has a redirect loop

  - by kath

  In my website I changed the directory name "vehicles-cars" to "vehicles-cars-for-sale". When I tried to redirect using a wild card redirect from my old directory name to new directory name in my web hosting cPanel account, I get an error every time I open pages from that directory: this webpage has a redirect loop The website is php. The problem is that that I have lots of pages with the old directory indexed in Google and they are getting duplicate content. I really need some advice on what to do with this problem. Here is .htaccess file code for redirect, thanks. RewriteEngine on RewriteCond %{HTTP_HOST} ^adsbuz\.com$ [OR] RewriteCond %{HTTP_HOST} ^www\.adsbuz\.com$ RewriteRule ^vehicles\-cars\/?(.*)$ "http\:\/\/adsbuz\.com\/vehicles\-cars\-for\-sale\/$1" [R=301,L]

  Read the article

• runt integrated intel graphics card + nvidia pcie graphics card?

  - by Roberto

  Its days I am searching for information/help. Is this possible at all? I am running Ubuntu 11.10 on an intel core i3 530 on a intel dh55hc mainboard. I have 2 monitors attached, one on dvi and one on hdmi. I want to ad a third or eaven a fourth monitor using an additional graphics card nvidia in pcie slot. I cant get an image on all monitors at the same time. I am wondering if this is possible at all? Any ideas where I can get information about this? Thanks in advance Roberto

  Read the article

< Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >