Search Results

Search found 6497 results on 260 pages for 'usb appliance'.

Page 43/260 | < Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >

• USB Mouse doesn't work after turning on Laptop

  - by Barry

  I have a USB mouse attached to my laptop which does not work when I switch my laptop on. I have to unplug it and plug it back in before it works. When I do this no driver installation occurs (presumably because it has already done this) the usual beep sound does occur and the mouse starts working again. If my laptop goes to sleep I can move the mouse and the laptop comes back to life. In fact it works perfectly apart from this annoying niggle on startup. Can anyone shed any light as to why I have to keep unplugging and plugging my mouse back on startup? I am running Windows 7 Home Premium Service Pack 1 (64 bit) on a Toshiba Satellite L755-1LL Laptop.

  Read the article

• USB webcam just works once and next time I've to reboot

  - by user30262

  I'm using Ubuntu 9.10, and a usb webcam that is shown as 'Bus 001 Device 005: ID 0ac8:3450 Z-Star Microelectronics Corp.' by lsusb. The problem is that on connecting the cam, it just works with the first program I start (skype, tokbox, messenger), and if I disconnect it or switch to another program, it stops to work and I have to restart my computer to make it work again. Has anyone else noticed this behaviour? Is there some good solution to reset the camera without rebooting to make it work again?

  Read the article

• Dead USB flash drive

  - by Unsliced

  So a friend has come to me with a problem. They have a dead USB thumb drive which no longer responds when plugged into a machine. I've tried it in a Mac and it doesn't even respond, at least on a Windows XP machine it sees that it is there but can't show it in explorer, just that whatever is plugged in has malfunctioned. There is obviously current because the activity light on the drive illuminates. I'm looking for suggestions, please. I have access to Mac or Windows hardware and am happy to experiment (and even to pay if the solution works!) It's a bit late to recommend regular backups, but in the lack of that, what's the next best forensic advice? Edit: I should stress that, if possible, we're trying to rescue the data, after all, thumb drives are basically disposable and hardly worth the bother if there's no emotional or functional reason for wanting to rescue it!

  Read the article

• USB flash drive showing empty but half of the capacity is in Used

  - by tamakisquare

  Not sure if I should post my question in superuser, but it looks like the most appropriate place among all StackExchange sites. I have a 16GB Kingston DataTraveler USB drive. When I tried to use it this morning, it showed up nothing in there but yet its details showed that half of the capacity was in used. I tried it with OS X, Ubuntu, and Windows 7 and the results were the same. I tried to create a new folder and it worked. Apparently, the drive is working but somehow not showing my previously stored data. Note that I was still using the drive last night and there wasn't any problems. Following @rob's suggestion, du -h gave me: 16K ./.Trashes 960K ./.Spotlight-V100/Store-V1/Stores/2620683B-A38B-42F4-A247-45CAF4826ADE 976K ./.Spotlight-V100/Store-V1/Stores 1008K ./.Spotlight-V100/Store-V1 1.0M ./.Spotlight-V100 1.1M And, df -h gave me: /dev/sdb1 15G 7.9G 7.1G 53% /media/KINGSTON Confirming what I reported. Anyone got a clue/answer to this issue? Thanks.

  Read the article

• Running Ubuntu off a USB drive?

  - by Solignis

  I was wondering if a USB 2.0 Thumb drive has enough bandwidth to act as a primary system drive in an Ubuntu Linux server. More specifically an SAN server. I am running an iSCSI target, ZFS and NFS-kernel-server, BIND9 (Slave), and Openldap (Slave). I was thinking of resorting to a thumb drive because my new motherboard only has 4 SATA ports and I have 5 disks. 4 (ZFS Pool) 1 (System). And unless I get an expansion card there is no way to get more SATA ports. This "server" leans more twords a home server. I use in my lab with my VMware server. It provides storage, or atleast it did until it died. Would it still be better to go with the SATA hard disk?

  Read the article

• Windows 8 apps not connecting to internet with USB dongle/modem

  - by Relborg

  The question pretty much says it all. I have Windows 8 Professional 64-bit and my main/only method of getting connected to the internet is to use this USB dongle/modem I have. Now it works perfectly, but when I go into the Windows "store" app it keeps on saying that I'm not connected to the web. In fact this happens for all "apps", they all think I'm not connected to the web when I actually am. Normal desktop applications e.g. browsers run fine. Is this a bug that has still not been resolved or is there some setting I need to go mess with? Thanks in advance!

  Read the article

• Installed Ubuntu on usb drive, now it's read-only and can't be formatted

  - by weiszam

  I installed Ubuntu (ubuntu-13.04-desktop-amd64) on a 8 gb pendrive. Because it worked pretty slow, I wanted to change it back to a normal pendrive. But this is what happened. Windows7 can't open the usb drive, can't view files or anything, can't access attributes. When I select to format, it says it can't format it because it is write-protected. Tried the same running from an Ubuntu, and trying from a booted GParted thing. When I view the partitions, they can't be deleted either. What should I do to get it formatted?

  Read the article

• Mounting external usb harddisk (ext4) in virtual box in windows

  - by twall

  I would like to mount my external linux formatted usb harddrive in a virtual machine. The host is windows 7. Unfortunately virtual box doesn't enumerate the external harddrive in the options menu of the virtual machine, even though it shows all other devices connected to the host. Windows can find the harddrive, but obviously just gives me the option to reformat it, because it doesn't support ext4. (ext2fsd or Ext2Read are no options, as I need newer ext4 features) How can I add a filter for my external harddrive so it is recognized by my virtual machine?

  Read the article

• Oracle Social Analytics with the Big Data Appliance

  - by thegreeneman

  Found an awesome demo put together by one of the Oracle NoSQL Database partners, eDBA, on using the Big Data Appliance to do social analytics. In this video, James Anthony is showing off the BDA, Hadoop, the Oracle Big Data Connectors and how they can be used and integrated with the Oracle Database to do an end-to-end sentiment analysis leveraging twitter data.   A really great demo worth the view. 

  Read the article

• REMINDER : SPARC T4 Servers and ZFS Storage Appliance Demo Equipment Purchase Opportunity

  - by Cinzia Mascanzoni

  Please mark your calendars for the SPARC T4 Servers and ZFS Storage Appliance Demo Program webcast on November 22nd at 12 noon GMT/ 1pm CET and learn how you can take the maximum advantage from this unique opportunity. The objective of this call is to share value, details, guidelines and rules of this demo program with you. Go on the EMEA VAD Resource Center to find more info and the details to access the webcast.

  Read the article

• Dualboot 12.04/windows 7 After installation from USB reboot straight to Windows with no option to select ubuntu and no boot loader

  - by Alkatraz

  windows 7 home premium intel i5 2500k CPU ASUSP8Z68-V PRO Motherboard GeForce GTX 570 GPU corsair 120Gb SSD (windows 7 os) WD 1tb HDD I select the USB drive in the BIOS and boot to it and choose install. i select to manually configure partitions, partition the 200gb of unallocated space on my 1Tb HDD into 16Gb swap file 30Gb / extf4 and 154Gb /home extf4. I make sure that the boot loader is installed to corsair 120Gb SSD (where the windows boot is) and installation goes smoothly. When i reboot after install it runs through bios strait into windows. I have tried upwards of a dozen times and i have also tried with linuxmint. I have also redownloaded the ISO and used two different programs to create the live usb. the installation seems to go well as i can see the partitions i have created in the windows device manager after install http://imgur.com/Wp0V1 I currently run lubuntu on my laptop but it is not a dual boot. i'm assuming this is a boot loader issue and i am assuming that inside those partitioned files in my screenshot there is a working OS of ubuntu 12.04 i just have no way of getting to it.

  Read the article

• 14.04.1 LTS 64 bit from USB does not see my windows 7 when I go to install it

  - by W J

  I suppose this is as much a question as a heads up/warning 14.04.1 LTS only gave me the option of writing over everything on one of my windows 7 machines. If I'd pushed the wrong button and continued I would have lost some mighty important items. On a similar windows laptop I succesfully installed 14.04.1 LTS 32 bit alongside windows 7 rather easily ( and I dig it!), there was a prompt in that case that let me select to install it alongside my windows OS.Yikes, not in this case. This laptop was formatted NTFS, the Ubuntu usb pendrive I formatted fat32. could be a clue? It looks like there is an advanced install ubuntu, but I am not that advanced. I may try to use windows diskformat (What fdisk is gone?) to make a partition, then see if the ubuntu on my usb stick "sees" my windows. If anybody has a better plan let me know. Mahalo AHA!? p.s. its a SSD harddrive, perhaps thats the crux?

  Read the article

• How to automount NTFS usb sticks on Xubuntu 12.10?

  - by netimen

  I'm running the Xubuntu 12.10 on a Lenovo T520 laptop. If I plug a FAT formatted usb stick, it's mounted automatically, but if I plug in a NTFS formatted one, I have to mount it manually. How to make NTFS usb sticks to mount automatically when plugged? My /etc/fstab in case it helps: # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 /dev/sda1 / ext4 errors=remount-ro,user_xattr 0 1 # swap was on /dev/sda5 during installation UUID=cd221c3e-44a8-459e-9dfb-04787f1cd0b6 none swap sw

  Read the article

• How can I install from a 9.04 live USB/DVD?

  - by bstpierre

  I have a 9.04 (Jaunty) ISO burned to a USB stick; it appears to be a "live DVD". When I boot from it, I get a GRUB menu listing: Ubuntu, with Linux 2.6.35-generic (This matches the system currently installed on the HDD?) Ubuntu, with Linux 2.6.35-generic (recovery mode) Memory test Ubuntu 9.04, kernel 2.6.28-11-generic (on /dev/sda1) Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode) (on /dev/sda1) Ubuntu 9.04, memtest86+ (on /dev/sda1) When I select Ubuntu 9.04, kernel 2.6.28-11-generic (on /dev/sda1), I arrive at the desktop of a 9.04 system. I want to wipe the HDD clean and install 9.04. (Upgrading to something newer is not an option; this version is required by a legacy application.) How can I install from this live USB image? I vaguely remember some incantation that I should be able to use in the booted system, but my google-fu is broken at the moment. I'm comfortable with low-level commands, so if you want to recommend a more hard-core strategy, I'm willing to roll with it without requiring a ton of detail...

  Read the article

• Cisco adaptive security appliance is dropping packets where SYN flag is not set

  - by Brett Ryan

  We have an apache instance sitting inside our DMZ which is configured to proxy requests to an internal NATed tomcat instance inside our network. It works fine, but then all of a sudden requests from apache to the tomcat instance stop getting through with the following in the apache logs: [error] (70007)The timeout specified has expired: ajp_ilink_receive() can't receive header Investigating into the Cisco log viewer reveals the following: Error Message %ASA-6-106015: Deny TCP (no connection) from IP_address/port to IP_address/port flags tcp_flags on interface interface_name. Explanation The adaptive security appliance discarded a TCP packet that has no associated connection in the adaptive security appliance connection table. The adaptive security appliance looks for a SYN flag in the packet, which indicates a request to establish a new connection. If the SYN flag is not set, and there is not an existing connection, the adaptive security appliance discards the packet. Recommended Action None required unless the adaptive security appliance receives a large volume of these invalid TCP packets. If this is the case, trace the packets to the source and determine the reason these packets were sent. All are machines are virtualised using VMware, and by default machines have been using the Intel E1000 emulated NIC. Our network administrator has changed this to a VMXNET3 driver in an attempt to correct the problem, we just have to wait and see if the problem persists as it's an intermittent problem. Is there something else that could be causing this problem? This isn't the first service where we have had similar issues. Our apache host is running Ubuntu 11.10 with a kernel version of 3.0.0-17-server. We have also had this issue on RHEL5 (5.8) running kernel 2.6.18-308.16.1.el5, this machine also has the E1000 NIC. NOTE: I am not a network administrator and am a software architect and analyst programmer responsible for these systems.

  Read the article

• Ideal Bacula appliance?

  - by Ricket

  I'm an intern at a small company and we (the IT department of two) manage <100 client computers and a handful of servers. Currently we're using a company's appliance to handle backup; it does a small backup every night and a full backup every weekend, and a guy comes on Wednesday to take an offsite backup drive (and gives back last week's drive to swap with it). Lately this system, mainly the appliance, has been having problems, so we are looking for an alternative. I'm researching other companies but also looking into what we might expect from trying to do this ourselves. There will undoubtedly be a large learning curve, but hey, that's what serverfault is for, right? :) So anyway I was looking at Bacula. Feature list sounds great, documentation is plentiful, but it's only software. So my question is, what is the ideal backup server to run the Bacula server software on? And not only the server but other related appliances. Our current backup appliance uses only hard drives, not tape drives. It has several plugged into it at one time, in hotswap bays on the front of the machine. I couldn't help but notice though, it's hardly more than Windows XP with hard drive bays, a PCI eSATA card (which connects to another appliance extension piece with 2 more bays), and their software. Since the company will take back their appliance if/when we cancel with them, where can I go to configure a server with these kinds of things? Maybe I'm being naive, I'm sure Dell (and any other computer company) sells them in the small business section of their website, but I wanted to make sure that there's not some other more recommended place that other companies are getting their hardware from, and that I don't need anything special for Bacula.

  Read the article

• Options for running virtual appliance on boot in Windows

  - by Chris

  I'm working on a software package I'd like to be able to release as a virtual appliance. I'll be exporting the appliance from VirtualBox as a .ovf file. Outside of vmware server, are there any Windows host options that allow me to start the appliance when the host OS boots?

  Read the article

• Best Easiest Fastest No Install USB Boot Disk in 4 Simple Steps :)

  - by PearlFactory

  USB Boot Disk When you look how to create USB Boot Disk on the web it is a nightmare   Here is the easiest I use that works for all MS prods At a computer running Windows Vista, Windows 7, or Windows Server 2008, run a command prompt as administrator and execute the following: Make Sure you have all explorer windows closed and nothing referencing the USB i.e a doc open in Word 1. C:\> diskpart DISKPART> list disk [Identify disk # of the USB key] DISKPART> sel disk 1 [assuming 1 was the # from above] DISKPART> clean [CAUTION—will wipe whichever disk is selected] DISKPART> cre part pri DISKPART> active DISKPART> assign DISKPART> format fs=ntfs quick DISKPART> exit C:\> exit 2. Copy the contents of the Windows Server 2008 R2 or any other MS OS  DVD/ISO to the USB key. 3. From the system tray, use the “Safely remove hardware” icon to safely remove the USB key from the computer. This helps ensure that all files have been fully written to the USB key. (Especially after the large file copy) 4. Restart,,,put usb in and Find reference from HP h20195.www2.hp.com/v2/GetPDF.aspx/4AA3-1317ENW.pdf

  Read the article

• Booting Ubuntu 13.10 form USB on server with no OS (Dell PowerEdge T110)

  - by user35581

  I have a Dell PowerEdge T110 (Xeon 1220v2) server with no OS. From my mac, I was able to save the Ubuntu 13.10 for server iso (x86) and used UNetbootin to save the iso to a USB stick (2GB). I was hoping to boot the server from USB, and all seemed to be going well, BIOS even detected my USB drive when I plugged it in, but for some reason I'm getting a "Missing operating system" error. I checked the USB drive and it appears that UNetbootin put the correct files on it form a cursory glance (although I'm not entirely sure what I should be looking for). Should I be able to boot a server with no OS from a UNetbootin created Ubuntu 13.10 USB? And if so, why might BIOS not find the right files? I had read that there is a USB Emulation setting in BIOS, but I haven't been able to find this in the menus. My understanding is that by default, this is set to on. I might try wiping the USB stick and running UNetbootin again. The USB is formatted to MS-DOS FAT16 (should it be formatted some other way?).

  Read the article

• Remove Kernel Lock from Unmounted Mass Storage USB Device from the Command Line in Linux

  - by Casey

  I've searched high and low, and can't figure this one out. I have a older Olympus Camera (2001 or so). When I plug in the USB connection, I get the following log output: $ dmesg | grep sd [20047.625076] sd 21:0:0:0: Attached scsi generic sg7 type 0 [20047.627922] sd 21:0:0:0: [sdg] Attached SCSI removable disk Secondly, the drive is not mounted in the FS, but when I run gphoto2 I get the following error: $ gphoto2 --list-config *** Error *** An error occurred in the io-library ('Could not lock the device'): Camera is already in use. *** Error (-60: 'Could not lock the device') *** What command will unmount the drive. For example in Nautilus, I can right click and select "Safely Remove Device". After doing that, the /dev/sg7 and /dev/sdg devices are removed. The output of gphoto2 is then: # gphoto2 --list-config /Camera Configuration/Picture Settings/resolution /Camera Configuration/Picture Settings/shutter /Camera Configuration/Picture Settings/aperture /Camera Configuration/Picture Settings/color /Camera Configuration/Picture Settings/flash /Camera Configuration/Picture Settings/whitebalance /Camera Configuration/Picture Settings/focus-mode /Camera Configuration/Picture Settings/focus-pos /Camera Configuration/Picture Settings/exp /Camera Configuration/Picture Settings/exp-meter /Camera Configuration/Picture Settings/zoom /Camera Configuration/Picture Settings/dzoom /Camera Configuration/Picture Settings/iso /Camera Configuration/Camera Settings/date-time /Camera Configuration/Camera Settings/lcd-mode /Camera Configuration/Camera Settings/lcd-brightness /Camera Configuration/Camera Settings/lcd-auto-shutoff /Camera Configuration/Camera Settings/camera-power-save /Camera Configuration/Camera Settings/host-power-save /Camera Configuration/Camera Settings/timefmt Some things I've tried already are sdparm and sg3_utils, however I am unfamiliar with them, so it's possible I just didn't find the right command. Update 1: # mount | grep sdg # mount | grep sg7 # umount /dev/sg7 umount: /dev/sg7: not mounted # umount /dev/sdg umount: /dev/sdg: not mounted # gphoto2 --list-config *** Error *** An error occurred in the io-library ('Could not lock the device'): Camera is already in use. *** Error (-60: 'Could not lock the device') ***

  Read the article

• USB Hardware vs. Software Write Lock

  - by TreyK

  I'm in the market for a USB flash drive, and remember this cool feature a tiny 32MB flash drive of mine had: a write lock switch. This seemed like it would be an amazing feature to have as a shield against any nastiness happening to the drive on an unfamiliar computer. However, very few drives on the market offer this feature. Instead, it seems that forms of software protection are the more prominent method. This software protection causes me a bit of uneasiness, as it seems like this software wouldn't be nearly as bulletproof as a physical switch. Also, levels of protection seem to vary from product to product. Being able to protect certain folders from reading and/or writing would be nice, but is the security trade-off worth it? Just how effective can this software protection be? Wouldn't a simple format be able to clean any drive with software protection? My drive must also be compatible with Windows XP, Vista, and 7, as well as Linux and Mac. What would be the best way forward for getting a well-sized (~8GB) flash drive with a strong write protection implementation, for little or no more than a regular drive? Thanks.

  Read the article

• Issues with creating USB bootable Mountain Lion

  - by Sidd

  I am trying to set up a triple boot Windows 8, Mountain Lion, and Ubuntu. I am stuck though. I have got Windows 8 on a partition, and I am trying to get Mountain Lion on there at this point. I installed a VMware with a Snow Leopard 10.6.2 image on the Windows 8 platform. I used the disk utility in this program in order to get Mountain Lion on there. This is what i did specifically: I got the installesd.dmg. I 'mounted' that file or whatever you call it, and out came something along the lines of "Install Mountain Lion OS x" (something like that - it was like a submenu under the installesd.dmg in the disk utility). I got my PNY 8 gb Attache Flash Drive and went to the Erase tab of disk utility. I erased it using the Mac OS Extended (Journaled) setting and called it "Mac". I went to the Restore tab, dragged "Mac" into destination, and dragged "Install Mountain Lion OS x" to the source. Everything seemed to go well, but it didn't. When trying to boot from the flash drive (and yes, I set the BIOS correctly), it skipped it, and loaded Windows 8 normally as if nothing was plugged in. When I try looking at the flash drive in windows 8, it comes up as a 200 mb capacity drive labeled "EFI" with nothing in it (remember, it was 8gb in the beginning). I downloaded Plop Boot Manager, but it did not recognize a USB being plugged in. Does anyone know how I could fix this?

  Read the article

• Dismount USB External Drive using powershell

  - by JC

  Hello, I am attempting to dismount an external USB drive using powershell and I cannot successfuly do this. The following script is what I use: #get the Win32Volume object representing the volume I wish to eject $drive = Get-WmiObject Win32_Volume -filter "DriveLetter = 'F:'" #call dismount on that object there by ejecting drive $drive.Dismount($Force , $Permanent) I then check my computer to check if drive is unmounted but it is now. The boolean parameters $force and $permanent have been tried with different permutations to no avail. The exit code returned by the dismount command changes when the params are toggled. (0,0) = exit code 0 (0,1) = exit code 2 (1,0) = exit code 0 (1,1) = exit code 2 The documentation for exit code 2 indicates that there are existing mount points as a reason why it cannot dismount. Although I am trying to dismount the only mount point that exists so I am unsure what this exit code is trying to tell me. Having already trawled the web for people experiencing similar problems I have only found one additional command to try and that is the following: # executed after the .Dismount() command $drive.Put() This additional command does not help. I am running out of things to try, so any assistance anyone can give me would be greatly appreciated, Thanks.

  Read the article

• Prolific USB-to-Serial Comm Port significantly slower under Windows 7 comparing to Windows XP

  - by Dmitry S

  Not sure if this question should be asked here or on SuperUser but if we get an answer here it may be useful for others here I am using a Prolific USB-to-Serial adapter based on the Prolific chip to use with a device on serial port. I have the latest version of the driver installed: 1.3.0 (2010-7-15). When I use my device with this adapter on my main Windows 7 (32bit) system it takes 8-9 seconds to send a command through to the device. However, when I do the same thing on a different Windows XP system (an old laptop I borrowed for testing) it only takes 2-3 seconds. I have made sure that the port settings and other variables are the same between systems. I also tested on a third laptop (also running Windows 7) and again got a significant delay. So the question is if anyone else experienced the same problem and found a solution. I would like to avoid moving to an XP system for what I need to achieve so that's my last option. Thanks in advance.

  Read the article

• It takes a long time until Windows XP recognize I connected USB drive

  - by Pavol G

  I have a problem with my new USB disk. When I connect it to my laptop with Windows XP SP2 it takes about 4-5min until Windows recognizes it and shows it as a new disk. I can also see (disk's LED is blinking) that something is scanning the disk when I connect it; when this is done Windows immediately recognize it. Also when I'm copying data to this disk the speed is about 3.5MB/sec. It's connected using USB2.0. I tried to check for spyware (using Spybot), also tried running Windows in safe mode. But still have the same problems. Do you have any idea what could help to solve this problem? On Windows Vista (another laptop) everything is ok, disk loads in about 15sec and speed is about 20-30MB/sec. Edit: I tried to update to SP3 - no change Edit2: When this "strange" scanning occurs I can see that DPCs process is taking about 50% of CPU. When the scan ends (after 5min) this process take 0% again. Edit3: About the scan time, currently it's taking about 5min, but this time is growing as I'm adding more data to the disk, currently its about 40GB and I don't want to see how long it will take with 1000GB. Thanks a lot for every advice!

  Read the article

< Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >