Search Results

Search found 15966 results on 639 pages for 'connection'.

Page 430/639 | < Previous Page | 426 427 428 429 430 431 432 433 434 435 436 437  | Next Page >

  • Network configuration problem

    - by Musti
    in my dorm I have to change network configuration and then if it is successfull, I have to enter a user name and password for wired internet connection. Anyway, I had many attempts but I couldnt achieve, and please look at my steps and tell me if there is something wrong and at the end there is an error, but I really dont have any idea about this error. (I am a new ubuntu user, and network is far away of my interests) 1) /etc/network/interfaces auto eth0 iface eth0 inet static address 172.030.014.038 netmask 255.255.255.252 network 192.168.2.0 broadcast 192.168.2.255 gateway 172.030.014.038 2) sudo gedit /etc/resolv.conf nameserver 010.050.001.001 nameserver 010.050.001.002 3) /etc/init.d/networking stop Deconfiguring network interfaces... [ OK ] 4) /etc/init.d/networking restart Running /etc/init.d/networking restart is deprecated because it may not enable again some interfaces Reconfiguring network interfaces... 172.030.014.038: Unknown host ifconfig: `--help' gives usage information. Failed to bring up eth0 Note: IP-address, netmask, gateway, Preferred DNS server and Alternate DNS server ara given by the management of Dorm. It wad very easy in windows but I couldnt achieve in Ubuntu. I also tried to edit from "edit connections" but the save button is gray and I cannot save it. Thanks in advance. / Musti

    Read the article

  • tunneling x11vnc through ssh on a non standard port to ubuntu computer tightvnc

    - by user72372
    I have been stuck with setting up my virtual desktop on my ubuntu laptop. I am running ubuntu to ubuntu with x11vnc I start the process on my laptop as follows: " ssh -L5904:localhost:5900 -p Port remoteuser@remoteip." That command works, then I start x11vnc server, "x11vnc -noncache -once -shared -rfbauth ~/.vnc/passwd." This command works and starts connection. Then I open another window on my laptop and type, export VNC_VIA_CMD='/usr/bin/ssh -2 -c aes128-cbc -x -p Port -l User -f -: %L:%H:%R %G sleep 20' (not sure if works). then I type, vncviewer -endcodings Tight -depth 8 -quality 1 -via IPofremotemachine -u remoteuser localhost:01. The first time it work but from now on it just gives me the vncviewer -help screen everytime. I type in the password for my remote machine and then shows -help screen for vncviewer. I think the problem is with Tightvnc viewer but don't know what. Please help. I got some info on www.vanemery.com/Linux/VNC/vnc-over-ssh.html?.

    Read the article

  • What should I do when the GETDEB repository is down?

    - by 13east
    I'm trying to install programs/files from the getdeb repo but get a "check your internet connection" error. Programs than I've tried include Qbittorrent and Mozilla-Plugin-VLC. Through the terminal I get the following errors: Err http://archive.getdeb.net/ubuntu/ natty-getdeb/apps qbittorrent amd64 2.8.2-1~getdeb2 Could not connect to archive.getdeb.net:80 (209.105.191.78). - connect (113: No route to host) E: Failed to fetch http://archive.getdeb.net/ubuntu/pool/apps/q/qbittorrent/qbittorrent_2.8.2-1~getdeb2_amd64.deb: Could not connect to archive.getdeb.net:80 (209.105.191.78). - connect (113: No route to host) & Err http://archive.getdeb.net/ubuntu/ natty-getdeb/apps mozilla-plugin-vlc amd64 1.1.10-1~getdeb1 Could not connect to archive.getdeb.net:80 (209.105.191.78). - connect (113: No route to host) E: Failed to fetch http://archive.getdeb.net/ubuntu/pool/apps/v/vlc/mozilla-plugin-vlc_1.1.10-1~getdeb1_amd64.deb: Could not connect to archive.getdeb.net:80 (209.105.191.78). - connect (113: No route to host) I'm not having any problems adding/removing other programs/files from my machine. Is there a problem with GETDEB repo (and if so, is there any way to fix it on my end) or is there something wrong with my computer's configuration?

    Read the article

  • Logging upload attempt with proftpd

    - by Amit Sonnenschein
    I have a logging server that i use with external hardware, the idea is that a special hardware is uploading logs about it's operation every few hours and from the server i can do whatever i need to do with the information, the old server was getting a bit too old and i've moved to a new one, i've install lamp,proftpd and ssh (just the same as i had on the old server). now for some reason the logs are not being uploaded and i don't know why. the hardware uses a direct ftp access - i've the proftpd.log and saw that the connection is not being rejected (just to make sure i didn't make a mistake with the user/pass) my problem is that for some reason the upload itself is failing... it might be due to wrong path (as it's hard coded in the hardware) but i can't really know as proftpd wont give me any details.. i've tried to change the loglevel to "debug" thinking it would give me more information but i don't see any change... is there any other way i can make sure proftpd logs EVERTHING ?

    Read the article

  • How to clear unshown OSD notifications

    - by Avatar Parto
    I am a webmaster of 2 active websites. Every time I start Thunderbird, it downloads all the new messages from the admin mail addresses of these sites - [email protected], [email protected], [email protected], etc. There are about 20 of them - this includes my personal email accounts. Now, am not always connected to the internet and there arises cases where I need to access already downloaded mails. Thunderbird then tries to connect to the internet, which it can't coz am offline, and then displays about twenty OSD notifications, one after the other, telling me that connection for each email address has failed. That's frustrating and it really eating me up. Am looking for a way, either: 1. To tell Thunderbird NOT to connect to the internet when am offline, or 2. To clear all these notifications after like the first one shows. And if it will help, am using ubuntu 13.04 and Thunderbird 24.0 and I always keep my computer fully updated. Any help is welcome. Thanxs.

    Read the article

  • How do I analyze an Apache Bench result?

    - by Alan Hoffmeister
    I need some help with analyzing a log from Apache Bench: Benchmarking texteli.com (be patient) Completed 100 requests Completed 200 requests Completed 300 requests Completed 400 requests Completed 500 requests Completed 600 requests Completed 700 requests Completed 800 requests Completed 900 requests Completed 1000 requests Finished 1000 requests Server Software: Server Hostname: texteli.com Server Port: 80 Document Path: /4f84b59c557eb79321000dfa Document Length: 13400 bytes Concurrency Level: 200 Time taken for tests: 37.030 seconds Complete requests: 1000 Failed requests: 0 Write errors: 0 Total transferred: 13524000 bytes HTML transferred: 13400000 bytes Requests per second: 27.01 [#/sec] (mean) Time per request: 7406.024 [ms] (mean) Time per request: 37.030 [ms] (mean, across all concurrent requests) Transfer rate: 356.66 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 27 37 19.5 34 319 Processing: 80 6273 1673.7 6907 8987 Waiting: 47 3436 2085.2 3345 8856 Total: 115 6310 1675.8 6940 9022 Percentage of the requests served within a certain time (ms) 50% 6940 66% 6968 75% 6988 80% 7007 90% 7025 95% 7078 98% 8410 99% 8876 100% 9022 (longest request) What this results can tell me? Isn't 27 rps too slow?

    Read the article

  • How switch between screen inside screen?

    - by André Andrade
    I have to work inside two environment. One Windows (local) and one Linux (remote). I've installed the screen linux utility in both. I'm able to open a screen on my windows, then in one tab, I opened a ssh connection to the linux remote and I start another screen. Sample linux -- |0 linux remote 0| 1 linux remote 1 windows-- |0 linux | 9 windows I can switch between "linux remote 0" and "linux remote 1" using Atl+. This is configured in .screenrc (bindkey "^[0" select 0) How could I switch to "9 windows"?

    Read the article

  • Wireless dropouts that only affect subset of devices

    - by jwaddell
    When watching videos streamed over WiFi from a NAS box (D-Link DNS-323) I am getting wireless dropouts. However they only appear to occur when I have left my laptop (Dell Inspiron 9300 running Windows XP SP3) running; the laptop is usually suspended if I'm not using it. The dropouts have occurred when streaming to a Netgear EVA8000 streaming device, and also to a PS3. I'm using a Netgear DG834G as the wireless modem/router. When a dropout occurs I go to the laptop and see that its wireless connection has also dropped out. The odd thing is that my wife's MacBook and my iPhone still maintain their connections. What could be causing this behaviour, and how do I go about fixing it?

    Read the article

  • Authentication issues setting up iRedMail on Debian

    - by Sergio Rinaudo
    I'm setting up an exchange server using iRedMail. Following the official iRedMail installation guide (http://www.iredmail.org/install_iredmail_on_debian.html) and the Digital Ocean guide (https://www.digitalocean.com/community/articles/how-to-install-iredmail-on-ubuntu-12-04-x64) I was able to install iRedMail without any problems, so I have all the services up and running. I can configure domains and emails using iRedAdmin BUT I have problem both sending and receiving email, what I get from Roundcube is 'Authentication error' when trying to send an email. Also I can't receive anything. I also tried to connect to the mx server using telnet, it connects, but after the STARTTLS command, when I start to write "MAIL FROM:" the connection is lost. Something in the configuration is not working (at the moment I have the configuration written by the iRedMail installation) but I do not know where, I hope someone can enlight me! Thank you

    Read the article

  • How do I record sound from my CD/DVD player without other system sounds in the mix?

    - by Software Monkey
    Using GoldWave I can record via the "Stereo Mix" channel, but I get no sound on the "CD" channel. Of course, using the stereo mix also mixes in all system sounds, including beeps, etc. I have the analog out on the DVD player connected to the CD-IN connector on the MoBo. I can hear CDs and DVDs playing just fine through my speakers - is this because the CD is also IDE data connection in to deliver the sound to the sound card, then? I specifically want to record a DVD; I can easily rip a CD using GoldWave's built-in ripper. Is there anything I have forgotten or have to enable? Or is it likely I have a damaged cable? My system is an MSI mobo and is running Windows XP SP3.

    Read the article

  • Laptop is super slow on network

    - by Gary
    So on our network we have a bunch of wireless macs and window Operating laptops, we have a network setup with 802.11g,b,n. All the laptops seem fine except one which is only getting speeds of 54Mb. I have changed the encryption from AES to TKIP and reset the connection, i have updated the drivers, tried plugging it into the LAN and still same slow speed. Apparently the laptop with the slow speed is fine on other networks. I don't know what to do, can anyone help me?

    Read the article

  • LPR command won't recognize CUPS printer

    - by Datapimp23
    I have a cups server with one shared printer configured on it. It prints test pages without problems. printername (Idle, Accepting Jobs, Shared) Description: desc Location: Driver: Zebra ZPL Label Printer (grayscale, 2-sided printing) Connection: socket://172.20.50.26 Defaults: job-sheets=none, none media=oe_w288h432_4x6in sides=one-sided This is the output from lpstat -t. it shows that the printer is idle and accepting requests admin@SERVER:~$ lpstat -t scheduler is running no system default destination device for printername: socket://172.20.50.26 printername accepting requests since Thu 26 Jan 2012 01:29:35 PM CET printer printername is idle. enabled since Thu 26 Jan 2012 01:29:35 PM CET Now when I want to send a printjob to it via an LPR command it won't recognize the printer /usr/bin/lpr -P printername test.pdf Result lpr: ttn_seg_zebra1: unknown printer What am I missing here ?

    Read the article

  • CGI error from PHP when running exec() on IIS

    - by Patrick
    Windows Server 2003 x64 PHP 5.2 IIS 6.0 The program Ink2Png.exe is set with Everyone-Read and Execute permissions. As does its dependency (microsoft.ink.dll) PHP Safe Mode is off exec() is passed [the full exe path], space, [full path to another file] This other file also has full read permissions. The output directory has full write permissions. As soon as exec() is hit, the connection dies, the browser does not even receive a full set of http headers, and it reports a CGI error. Examining the output, it appears the program was not even run. Any ideas? How can I figure out what exactly is happening and get it running again? EDIT: Also, it is a .NET application, if that is significant in any way.

    Read the article

  • How to block spam site republishing my content

    - by Fo.
    I noticed today that Google search results shows some spam copies of one of my sites. The url looks something like this: http://[subdomain].spamsite.com/www.example.com ...where example.com is my site. In my Apache access logs I'm noticing several lines like the following whenever I load the above url: 127.0.0.1 - - [219/Oct/2012:19:27:34 +0000] "OPTIONS * HTTP/1.0" 200 - "-" "Apache (internal dummy connection)" The spammer's site shows an exact up to date copy of my site, so I think they are pulling in live data. Any idea how I can block this traffic?

    Read the article

  • central log-server with auditdisp

    - by johan
    I want to setup a central log-server. The log-server is running with debian 6.0.6 and the audit daemon is installed in version 1.7.13-1. The Clients are running with Red Hat 5.5 and they connect to the log-server via audispd. The connection works fine and i get all messages from each node. My questions is: is it possible that the auditd daemon from the log server write the messages from each node in a separate file? I try to transfer the messages via the syslog daemon, that works but i can not use tools like ausearch to analyze these log-files.

    Read the article

  • Internet problems

    - by dan
    I've got problems on my freshly installed windows Xp machine. I cannot connect to the internet and I've tried various 'solutions' provided to me by the help and support center. Surprisingly none of them worked... Anyways, I've got 3 pc's next to me sharing a lan which is connected to the internet though a modem. The computer I use right now uses windows xp aswell and runs without any problems. I've tried everything on not working computer. I've ran the connection wizard several times, but it's not working :( Also I've very little experience with this version of windows, so I'm sorry if the solution is obvious.

    Read the article

  • Have to reset wireless frequently on iPad / Macs connected to Cisco WRV200

    - by retailevolved
    I have a Cisco WRV200 set up in our small office. The wireless signal works great for PCs, but I have found that Macs and iPads have to frequently reset the connection. It will be working for about 10 minutes, then stop. To fix it, I just turn off Airport and turn it on again. On an iPad, I have to go into settings, shut the wireless off, and then turn it on again. The router is broadcasting mixed B/G on channel 6. Security is WPA-PSK2. Anybody out there had similar issues with their router? How can I fix it?

    Read the article

  • Network on linux server is periodically down

    - by Fabian
    I have an old server running Fedora 4 that occasionally just stops responding via network for about an hour. This happens 1-2 times a week. Also no connection from the server itself to any other computer on the network is possible when it happens. The network settings and routes look fine. There are no unusual log messages and no unusual processes running at that time. If I restart the network or just do an ifconfig eth0 down & ifconfig eth0 up it works fine afterwards. I know that the server should be updated to a currently supported OS, but that is not really an easy option right now. Any ideas on how I could diagnose and fix that problem?

    Read the article

  • some websites not opening completely

    - by mkk
    Hi everybody, I am using bsnl broadband connection, modem: wa3002g1 os: xp(86x) / vista(64x) A few days back I have changed the modem (don't know the previous modem no) because of some issues. since then I am not able to open most of the websites in firefox, IE6/8, chrome, opera. If i connect with other network like reliance data card, those websites are opening, if i connect bsnl the problem will be same again. I called to customer care many times, but no use. Please help me to find the solution. Thank you in advance.

    Read the article

  • SVN Error when connecting from MacBook

    - by user66850
    This is drying me nuts for last 5 days!!! Out of the blue 5 days ago, SVN access from my MacBook Pro failed: I cannot access any SVN (i.e. not in our University or open source projects etc). The error obtain when performing 'svn co', or any other svn commands is shown below. This is same message is obtained irrespective of the svn repository (i.e. it is something due to my Macbook) svn co http://anonsvn.internet2.edu/svn/i2mi/branches/GROUPER_1_6_BRANCH/ svn: OPTIONS of 'http://anonsvn.internet2.edu/svn/i2mi/branches/GROUPER_1_6_BRANCH': Could not read status line: connection was closed by server (http://anonsvn.internet2.edu)

    Read the article

  • SQUID Transparent SSL proxy (no intercept)

    - by user974896
    I know how to have squid work as a transparent proxy. You put it into transparent mode then use your router or IPTABLES to forward port 80 to the squid port. I would like to do the same for SSL. Every guide I see mentions setting up keys on the squid server. I do not want squid to actually decrypt the SSL traffic then establish a connection with the server, rather I would like squid to simply forward the SSL traffic as is. The only thing I would like to do is be able to check the SSL request for any offending IPs and drop the packets if the destination is one of them.

    Read the article

  • Domain users sometimes cannot access our NAS

    - by Natalie
    I'm using a QNAP TS-410 Turbo NAS and I've got domain users connecting to it frequently everyday. However, there are times when their connection to the NAS will seem to just drop and, suddenly, they cannot access their network drives (which I had set up our Domain Controller to automatically map to folders on the NAS). Could you please tell me what may cause this? I don't think it is a network issue as everything else seems to work just fine. (If more details are needed, please let me know so I can update this question.)

    Read the article

  • Why such a dramatic difference in wireless router max. simultaneous connections?

    - by Jez
    Recently, I've needed to look into buying a wireless router for a mission-critical system at work that will need to support quite a few simultaneous connections (potentially a few hundred laptops). One thing I've noticed is that there seems to be a dramatic difference between the max. simultaneous connections different routers can support; see this page for example - anything from 32 to 35,000! Why is there this degree of difference? You'd have thought that if we know how to make routers that can handle thousands of connections, we wouldn't be making stuff that's limited to a pathetic 32 anymore. Is it a firmware thing? A hardware thing? Are low-end manufacturers purposely putting low arbitrary connection limits in so people can be "encouraged" to pay more for high-end routers?

    Read the article

  • Selectively delete entries from Windows 7 autocomplete history dropdown box

    - by kez
    Random question, and I'm sure it has a very simple answer, if not already asked and answered in some shape or form. How do you selectively delete entries from the autocomplete history dropdown thingy? For example, in the Run dialog box, typing a few letters will display a dropdown box with a history of matchine entries that you have previously run. I swear I used to be able to delete from the list by using the arrow keys to highlight and then press the DEL key. Regardless of whether this is true or not, is there any way to selectively delete entries from this list? Another example is the dropdown list in the Remote Desktop Connection dialog box.

    Read the article

  • Ubuntu based VPN server behind NAT router?

    - by maartenn88
    I have a small intranet- and file-server inside our company, which can only be reached from inside our own network. I'd like to be able to reach the intranet and files on the server from outside the network, however I don't really like the idea of completely opening security by forwarding the ports on our NAT-router, so I'd prefer to enable a VPN possibility for this. So I have a router, which is the DHCP server and has NAT function, and I have an Ubuntu Server with the files and intranet on it. How do I configure these two so that I can make a VPN connection with my network in order to reach the server? thanks in advance for any answer!

    Read the article

< Previous Page | 426 427 428 429 430 431 432 433 434 435 436 437  | Next Page >