Search Results

Search found 12449 results on 498 pages for 'ebs e business suite'.

Page 433/498 | < Previous Page | 429 430 431 432 433 434 435 436 437 438 439 440 | Next Page >

The boot selection failed because a required device is inaccessible 0xc000000e

- by bbodenmiller

A family member of mine recently went on vacation and turned off their computer, something they normally do not do, upon returning home it would not turn on and now returns the error message below. Generally friends and family come to me for help with computers and I have no problem, however this time I am a bit stumped. Any suggestions would be greatly appreciated. As you can see the error message is: Status: 0xc000000e Info: The best selection failed because a required device is inaccessible. Before going to this error message it briefly flashes the Windows loading screen. I have been able to confirm through the Windows RE Command Line and the dir command that the C: drive is accessible and likely is just suffering a bootup issue. I have tried: Launching the repair process discussed in the error message three times however each time it requires a restart and then returns to the same error message. Changing the boot order to be hard drive first Getting into safe mode; F8 just results in the same error message before I can get to the menu to select safe mode I have checked to make sure the BCD (bcdedit, Boot Configuration Data) is still intact as per https://www.symantec.com/business/support/index?page=content&id=TECH160475 I plan to try (but would like additional comments on): sfc /scannow; requires a restart and thus will likely result in the error message again A memory scan Bootrec as per http://support.microsoft.com/kb/927392#method1 Swapping IDE cables/ports Resetting the BIOS I noticed others with similar issues around the web are dual-booting however this machine is not setup in a dual-boot environment. Additionally at one point this error message supposedly showed up before I started working on the computer: The instruction at 0xfbe2584d referenced memory at 0x00000008. The memory could not be read. As previously stated any additional suggestions or words of advice would be greatly apprecaited.

Read the article
Static IP for dynamic IP

- by scape279

I have a dynamic IP address. I would like to have a static IP, but Virgin Media don't allow static IPs for residential broadband services, even if you ask them really nicely and offer to pay for it without switching to a business tariff. I am already registered with a dynamic DNS service which is updated by my router eg me.example.com will always resolve to my dynamic IP. This is fine for some circumstances, but not if you can only enter an IP address into configuration files/hardware etc like firewalls, subversion services etc etc. Is there a way I can have a static IP address 'forwarding' to my dynamic IP? Would a possible solution involve tunnelling? Setting up a private proxy? Please note the following: I am able to buy an IP address from my web host. I have access to a webserver and I am able to create custom DNS zones. I'm happy to have a webserver running at home if necessary also. I do not wish to change broadband providers. I have zero control over the services that require the IP address entering so I cannot tackle the problem that way round (services I need to access are at work). PS I've tried googling this issue, but it is very difficult to search for as most results are related to dynamic dns (which I already have set up and isnt quite what I'm after)

Read the article
Dell Management Packs in System Center Operations Manager 2007 R2?

- by bwerks

Hey all, I recently set up SCOM in a small business network environment. The root management server is a Dell Poweredge 2950, and I'd like to use SCOM to monitor it using Dell's management packs. I've imported the management packs into the SCOM deployment and followed Dell's installation instructions, but it doesn't seem to be fully working yet. Currently, the Diagram views in the Dell tree (Monitoring tab) seem to show me the server's place in the network topology, so it seems that at least part of it is working. However, none of the reports under "Performance and Power Monitoring Views" provide any information. When clicking on one of them (Power Consumption (Watts), for instance), the display area is blank and there is a tooltip visible that reads "No performance counter is selected. To select a counter, place a check mark in the Show column in legend below." However, in the legend, there's nothing there for me to check. I've installed OpenManage 6.2 on the server as per the Dell documentation, but I don't know what else I could have done that I missed. Does this sound like a familiar problem to anyone?

Read the article
How to update-grub on a system running overlayroot?

- by mikepurvis

We ship boxes configured with overlayroot, using the following overlayroot.conf: overlayroot=device:dev=/dev/sda6,timeout=20,recurse=0 Which produces the following mount configuration: $ mount overlayroot on / type overlayfs (rw,errors=remount-ro) /dev/sda5 on /media/root-ro type ext3 (ro,relatime,errors=continue,user_xattr,acl,barrier=1,data=ordered) /dev/sda6 on /media/root-rw type ext3 (rw,relatime,errors=continue,user_xattr,acl,barrier=1,data=ordered) /dev/sda1 on /boot type ext3 (rw) As you can see, three key physical partitions: sda1 is /boot, sda5 is a read-only "factory" root, and sda6 is a "user" root which can be wiped at any point to restore the machine to its original factory state. Now, the problem arises when update-grub is run for any reason: $ sudo update-grub [sudo] password for administrator: /usr/sbin/grub-probe: error: cannot find a device for / (is /dev mounted?). Understandable, since / is an overlayfs. The contents of /usr/sbin/update-grub are: #!/bin/sh set -e exec grub-mkconfig -o /boot/grub/grub.cfg "$@" With /usr/sbin/grub-mkconfig being the business part of things. But the actual problem is in /usr/sbin/grub-probe, called by grub-mkconfig, and grub-probe is a binary. So my question is, is there a parameter or whatever which can make grub-probe do the right thing in the face of / being an overlayfs? And secondly, is there a way to hack/patch that in so that the update-grub script just does the right thing? Thanks.

Read the article
Ubuntu software stack to mimic Active Directory auth

- by WickedGrey

I'm going to have an Ubuntu 11.10 box in a customer's data center running a custom webapp. The customer will not have ssh access to the box, but will need authentication and authorization to access the webapp. The customer needs to have the option of either pointing the webapp at something that we've installed locally on the machine, or to use an Active Directory server that they have. I plan on using a standard "users belong to groups; groups have sets of permissions; the webapp requires certain permissions to respond" auth setup. What software stack can I install locally that will allow an easy switch to and from an Active Directory server, while keeping the configuration as simple as possible (both for me and the end customer)? I would like to use as much off-the-shelf software for this as possible; I do not want to be in the business of keeping user passwords secure. I could see handling the user/group/permission relationships myself if there is not a good out-of-the-box solution (but that seems highly unlikely). I will accept answers in the form of links to "here is what you need" pages, but not "here is what Kerberos does" unless that page also tells me if it's required for my use case (essentially, I know that AD can speak Kerberos, but I can't tell if I need it to, or if I can just use LDAP, or...).

Read the article
Self-hosting vs. Budget hosting - What are the economics?

- by cdonner

My current hosting provider (shared Linux, unlimited domains, < $10 per month, with about 20 sites) has been giving me a lot of grief lately. I am contemplating to just ditch them and repurpose the old Sun V20z that is sitting in my basement rack, and move the hosting in-house, literally. My math goes as follows: my company pays up to $80 a months for my home internet service, which would cover the upgrade from currently Fios to Comcast business internet with 5 static IPs. So this comes free. running the server will cost me about $180/year at the current rate of approx. $.2/kWh my time is free So, it seems that the my net cost of doing this would be about $80 anually, plus the work that goes into setup and maintenance. I will have to get email hosting somewhere, which I do not want to do myself. On the other side of the balance sheet, I'd likely get better uptime than my provider based on recent stats, will not get suspended and don't have to spend hours with customer support. Overall, I am not convinced. Has anybody actually done that? What was your experience, and did it pay off?

Read the article
RAID1 Broken Mirroring

- by Sanoj

I'm having a little server with Windows Small Business Server 2003. I'm using RAID1, via a HighPoint Rocket RAID 1640 RAID-card, using two harddrives. This week the server alarmed, and durig reboot I got the error-message Broken Mirroring (User Manual page 30). I had a few alternatives (see the manual), first I tried Continue, but the server restarted during boot. Next time I took Power Off, and replaced the oldest harddrive with a new one, and when I booted, I selected Rebuild. Then I selected the new harddrive to be the new one. The rebuild-procedure started and a progress bar at 0% showed up, but after a few seconds I got the message Copy Failed!, then the server booted and Windows Server started. Now it works fine. But I guess that I'm just using one harddrive now, and it's not mirrored. I haven't touched the server since then (two days ago). What should I do now? I have no experience of this situation. Anyone that have some guidance?

Read the article
Printer spooler spoolsv.exe crashes

- by MattiasSN

We have a problem with a Windows 7 print spooler. There is a Windows 2011 Small Business Server running as print server and 2 computers in the network their print spooler keeps crashing at random. The log files says it is ntdll.dll that has a fault. Naam van toepassing met fout: spoolsv.exe, versie: 6.1.7601.17514, tijdstempel: 0x4ce7b4e7 Naam van module met fout: ntdll.dll, versie: 6.1.7601.17725, tijdstempel: 0x4ec4aa8e Uitzonderingscode: 0xc0000374 Foutoffset: 0x00000000000c40f2 Id van proces met fout: 0x55c Starttijd van toepassing met fout: 0x01cd9db324904eb1 Pad naar toepassing met fout: C:\Windows\System32\spoolsv.exe Pad naar module met fout: C:\Windows\SYSTEM32\ntdll.dll Rapport-id: 8789af0b-09a6-11e2-9d78-001c25237c45 The print spooler on the server keeps running and works fine. We can also print from other computers. But on two computers the print spooler crashes. Sometimes it crashes after a user is logged in, but it also happened multiple times after a print job. After each crash we get the same ntdll.dll error. Hopefully someone can help me with this problem. If you need more information, don't hesitate to ask.

Read the article
Can VMWare Server 2.0 be useful in Production for easing backups?

- by Keith Sirmons

Howdy, Let's run this idea by the group here. I am thinking about using VMWare Server in production to host a 2008 Domain Controller with DHCP and DNS, a 2008 member server with WSUS, some virus software, and other "management" utilities a second 2008 member server with SQL, IIS, and File Shares for a medium business of 50-100 desktops. The reason I am leaning toward Server vs ESXi is for backup purposes. Using ESXi, if I want to backup the VM's, I would need a second server in the office with enough storage availability to hold a copy of the vmdks. I am wondering if putting this virtual environment on top of a basic 2008 server install will allow for easier backups to both tape and/or to offsite storage using JungleDisk. Can a snapshot be triggered easily via a scheduled job? I know this doesn't necessarily handle file level restores, but I want to make sure in a DR situation, we can restore production servers quickly. Does this concept hold water? Would a very minimum install of the 2008 Host remove too many resources from the actual production machines? This would be a new Dell 410 server with 12 GB ram and (6) 600 GB 15K in a RAID 6, Dual Intel Xeon 2.26GHz procs.

Read the article
Why does bash sometimes think my $HOME isn't the correct directory?

- by Adam Yanalunas

Like the title says it seems that bash sometimes misidentifies my $HOME. This cropped up after a seemingly unique series of events that I will now replay in broad strokes. Running OS X 10.6 with normal, local account Work binds my account to Active Directory Much time passes with no issues Set up rvm to manage Ruby installs (this becomes important later) Upgraded to OS X 10.7 a few days ago After successful install, attempted to log in, was presented with "Must reset password" dialog that never allowed a password to be reset. Would simply shake the box after new password was entered. Much googling was done. Much more googling was done. Swearing was had. Logged in as root, created new account, set as admin, deleted /Users/[new account], renamed /Users/[old account] to /Users/[new account] Logged out of root, logged into new account with no issues After OS X asking for a my account password a few times to update Keychain and other system-level stuff it was back to business as usual. Opened Terminal, cd to project folder, tried "rails server" and was presented with: /usr/local/lib/ruby/1.9.1/rubygems/dependency.rb:247:in to_specs': Could not find rails (>= 0) amongst [] (Gem::LoadError) from /usr/local/lib/ruby/1.9.1/rubygems/dependency.rb:256:into_spec' from /usr/local/lib/ruby/1.9.1/rubygems.rb:1210:in gem' from /usr/local/bin/rails:18:in' Ran through a few exercises, decided to rm -rf ~/.rvm and reinstall. Running a --trace on the rvm installer shows it dies on this line: mkdir: /Users/[old account]: Permission denied Scrolling back through the --trace log I see many more mentions of /Users/[old account]. When inspect the install script the offending line is looking at "${HOME}/.rvm" as it tries to run the mkdir. To my confusion I also see mentions of /Users/[new account] in the log. I've tried exporting a new HOME in my .bash_profile to no luck. Can anyone guess why /Users/[old account] would still be kicking around?

Read the article
Why the system information message when accessing an Ubuntu server doesn't match free -m?

- by Andres

Each time I SSH into my AWS Ubuntu servers I see a system information message, showing load, memory usage and packages available to install, like this: Welcome to Ubuntu 12.04.3 LTS (GNU/Linux 3.2.0-51-virtual x86_64) * Documentation: https://help.ubuntu.com/ System information as of Sun Nov 10 18:06:43 EST 2013 System load: 0.08 Processes: 127 Usage of /: 4.9% of 98.43GB Users logged in: 1 Memory usage: 69% IP address for eth0: 10.236.136.233 Swap usage: 100% Graph this data and manage this system at https://landscape.canonical.com/ 13 packages can be updated. 0 updates are security updates. Get cloud support with Ubuntu Advantage Cloud Guest http://www.ubuntu.com/business/services/cloud Use Juju to deploy your cloud instances and workloads. https://juju.ubuntu.com/#cloud-precise *** /dev/xvda1 will be checked for errors at next reboot *** *** System restart required *** My question is about the memory percentage shown. In this case, it's showing a 69% of memory usage, but since the swap usage was 100% I checked it by myself. So when I run free -m I get this: total used free shared buffers cached Mem: 1652 1635 17 0 4 29 -/+ buffers/cache: 1601 51 Swap: 895 895 0 And that's of course closer to 100% than to 69%

Read the article
Vista ICS issue

- by Bill Grey

I have a strange problem with Internet Connection Sharing on a laptop running Vista Business. This laptop is connected to the internet via the ethernet port, which goes to an ADSL modem. it is automatically assigned the IP address 192.168.1.50, and the modem/gateway is 192.168.1.1 My friends laptop is running Vista Home. Previously, I would create an ad hoc wireless network, enable ICS, and everything would be perfect. My friend would have internet access via this. However, something has now mysteriously broken. If I enable ICS on the wireless connection, it resets my Local Area Connection, assigning it the manual IP address of 192.168.0.1, which means my connection to the internet is destroyed. Both wireless adapters on each network are assigned auto configuration addresses, in the 168. range. They can see each other fine, but my friends laptop cannot access the internet via mine, even after I have restored the Local Area Connection settings. I understand the computer with ICS enabled must have the IP of 192.168.0.1, but previously, before whatever went wrong, my wireless adapter would be 192.168.0.1 and my friends computer would get an IP via DHCP. I have also tried setting static IP address and making a bridge, none of which works. How can I fix this problem, and prevent enabling ICS from touching my Local Area Connection? Both machines have no firewall, have appropriate settings etc...

Read the article
Why do AWS spot-instance prices spike above the "on demand" pricing?

- by Laykes

Amazon Pricing on Spot Instance Inconsistencies This is something which will be best explained through screenshots of a historical chart of instance pricings. If you look at a lot of the instance prices for spot instances, you will notice regular patterns of spikes. See here: As you can see, the price for this compute medium instance, regularly spikes above the on demand price. A c1.medium instance (on demand), would only cost $0.186 per hour. But for a period of a few weeks, in zone B, the price would regularly spike to $1.20. This is some 6 times the actual on demand price. It's also not isolated. If you look at zone-b again for small instances, there is a similar, spike frequently. Which goes 4x the on demand pricing. Does anyone know why this happens? Here are a few suggestions Someone entered $1.2 instead of $0.12 (I would discount this since it happened 20 times over the space of 3 weeks). Amazon regularly artifically inflate their prices by bidding on their own instances to get the most bang for their buck. (I would discount this since it would be ridiculous and bad business) Some company launched 1000 servers at once, and wants to make sure that they all launch. (I would discount this since they would presumably launch them at a price which would be below the minimum on demand price. Why would you pay above on demand for a single server?). It's a bug in their reporting?

Read the article
Backup program for Windows using non-proprietary format?

- by Cristi Diaconescu

I'm looking at the various local backup programs for windows, and I was wondering which of them use a non-proprietary backup format? By non-proprietary, I mean I want to be able to access at least the latest version of the backed up files either directly, or by using an open-standard format like zip/7z/rdiff... The other thing I'm looking for in a backup program is the ability to create incremental backups. What I have found so far: SyncBack copies files as-is, using separate directories for versioning pretty much the same for all the 'roll you own' task scheduler + rsync/xcopy32/robocopy/MS SyncToy/etc solutions GFI Backup appears to be using Zip files, at least in their 'Business' version, not sure about the free 'Home' version. Didn't try it yet, but it's next on my list. Mozy (!) supports local backup starting with v 2.0 and basically provides a 2nd local copy on a separate partition. Subjectively, it feels slow and resource intensive (I think it took more than a week to finish the first local backup of ~ 300 GB), and does not appear to offer file versioning (arguably, you can get older file versions online). On the positive side, it looks like the local backup is integrated in the restore process which was traditionally a masochistic experience (and this goes for any online backup provider). Other suggestions? I favor ease of use over tons of options (e.g. SyncBack is very flexible but it offers sooo many ways to shoot yourself in the foot...)

Read the article
Two hosting providers running simultaneously... possible / not possible? good practice / unnecessary?

- by user29600

For the sake of their reputation, I won't mention the names. But I'll just use: Business I worked for previously - ABC Web Dev Hosting company they used - XYZ Hosting I recently found out that XYZ Hosting had some sort of incident where they ended up losing a lot of their client's data - including ABC Web Dev's. ABC Web Dev was able to recover some of their customer's websites, after pulling them from their local development computers and putting them up on another hosting provider. They ended up losing a lot of clients because of it and their reputation ruined. I'm starting my own web dev company and I don't want to run into this same issue. I'm planning on using Rackspace but, although they are a great company, according to wikipedia they still have had downtime in their past. I thought it might be a good idea to try to run two providers at once, to ensure that if anything happened in one the websites would still be live because of the other. I know the websites would have to be pulling from one server at all times, but if there's a way to redirect requests to the second server if the first one is down that would solve my issue. As a note, we will have a staging environment setup locally which will allow for quick recovery if a provider did have any issues, however I'd like to avoid any downtime at all if possible. So my questions are: Has anyone tried running two providers simultaneously? Would this be considered good practice or am I going too far? Is there really any way to run two simultaneously where one server acts as a backup?

Read the article
Can't change text color in Microsoft Word 2010

- by Wesley

I have Microsoft Office 2010 32-bit running on Windows 7 32-bit. When text is highlighted and a color is selected from the mini-toolbar or the ribbon, the text does not change color. If I change the color for multiple words, and select a different color for each word, the toolbar and ribbon will reflect each of the different colors that I chose, however it is not displayed in the document. So it appears that Word is aware of the text color and not as if it is simply not applying the change. What may be causing this inability to view text colors and how might I fix it? My only troubleshooting attempt so far has been to perform a repair installation of Office. EDIT 1 I created a document, typed a word, selected it and changed the color. I then saved the document as HTML. The text did not change color. This is the HTML in the document: <html xmlns:v="urn:schemas-microsoft-com:vml" xmlns:o="urn:schemas-microsoft-com:office:office" xmlns:w="urn:schemas-microsoft-com:office:word" xmlns:m="http://schemas.microsoft.com/office/2004/12/omml" xmlns="http://www.w3.org/TR/REC-html40"> <head> <meta http-equiv=Content-Type content="text/html; charset=windows-1252"> <meta name=ProgId content=Word.Document> <meta name=Generator content="Microsoft Word 14"> <meta name=Originator content="Microsoft Word 14"> <link rel=File-List href="Document_1_files/filelist.xml">  <link rel=themeData href="Document_1_files/themedata.thmx"> <link rel=colorSchemeMapping href="Document_1_files/colorschememapping.xml">  <style>  </style>  </head> <body lang=EN-US style='tab-interval:.5in'> <div class=WordSection1> <p class=MsoNormal><o:p> </o:p></p> <p class=MsoNormal><span class=GramE><span style='color:red'>blah</span></span><span style='color:red'><o:p></o:p></span></p> </div> </body> </html> EDIT 2 I recorded a macro and did the following: Typed a word Selected the word Changed the color. Oddly, I had some strange issues while the macro was recorded. I could not select text with my cursor. I had to select the text with control a and then apply the color change. I then couldn't deselect the selected text. Nonetheless, the text showed that it had a different color in the toolbar, but the color did not display in the document. Here's the macro: Sub Change_Text_Color() ' ' Change_Text_Color Macro ' ' Selection.TypeText Text:="Test Text" Selection.WholeStory Selection.WholeStory End Sub EDIT 3 I opened WordPad and created some text and was able to successfully change the color. If I copy and paste the colored text into a Word 2010 document, the color is lost. However, if you place the I-beam in the text and then look at the color selection drop-down menu on the ribbon or mini-toolbar, you can see that the proper color that the text should be in is highlighted. Edit 4 I uninstalled the entire Office 2010 Suite, rebooted and then reinstalled the suite. No change in behavior. Edit 5 Text cannot be colored in Excel either.

Read the article
Remote search system for samba shares

- by fostandy

I have several shares residing on a samba server in a small business environment that I would like to provide search facilities for. Ideally this would be something like google desktop with some extra features (see below), but lacking this the idea is to take what I can get, or at least get an idea for what is out there. Using google desktop search as a reference model, the principle additional requirement is that it is usable from clients over the network. In addition there are some other notes (note that none of these are hard requirements) The content is always files, residing on a single server, accessible from samba shares. Standard ms office document fare Also a lot of rars and zips which it is necessary to search inside. Permissions support, allowing for user-based control to reflect current permission access in samba shares. The userbase will remain fairly static, so manual management of users is fine. majority of users will be Windows based I know there are plenty of search indexers out there: beagle and tracker seem to be the most popular. Most do not seem to offer access control and web-based/remote search does not seem to be high priority. I've also seen a recent post on the samba mailing list asking for pretty much the exact same thing. (They mention a product called IBM OmniFind Yahoo! Edition and while their initial reception seems positive, I am pretty skeptical. RHEL 4? Firefox 2? Updated much?) What else is out there? Are you in a similar situation? What do you use?

Read the article
How to deal with DELL support system?

- by Nishant Kumar

We have purchased a Dell Optiplex 9010 SSFV for our organization's work. Since the first installation two of the USB keyboard keys were not working properly. I had to press those keys two times simultaneously, on first time keys did not work and for for second time it printed two characters (as it were buffering first character.) Two keys that were not working properly: Hexangrave (Below the ESC key: `) Double Quotes (Left the enter key ") We registered our complaint with DELL and they suggested (with some hard to understand and weird ENGLISH accent) some test and tricks, such as switching to different ports, checking keyboard on different PC, and it worked well with diff. PC(with Windows 7 Home Premium installed). It was clear that it is an OS fault, hence they suggested to re-install OS. Problem began here, we have a project on the run and currently a video editing project setup on our system, so can't re-install system in hurry and also DELL persons were not providing any other solution such as updating keyboard driver, etc. Arguments I am a Software Engg. and don't think it is a feasible solution to re-install entire system for simple problems. This prob is coming since the fresh system installation, so I don't think it will solve the problem. Finally, I had to find solution myself and got it here, now I want to show my disappointment to dell persons or at least tell them that they should improve there support system to not advice to re-install entire system for that simple problems. Notes We have purchased 5 years NEXT business day support from DELL for around 8000 INR (Not for that kind of solutions from DELL). It is Dell India Support System. So can anyone tell me how to tackle dell support system officially, so that they will pay more attention in near future. Thanks

Read the article
ClearType setting ignored in Windows Virtual PC with Windows XP Pro

- by Yadyn

I have a VM set up through Windows Virtual PC for Windows XP Pro and I have been completely unable to get ClearType to work. I have turned it on in the Display - Appearance - Effects dialog but it seems like it completely ignores this. All text is still without any anti-aliasing. Even setting it to normal smoothing doesn't work. If I disable Integration Features, it seems to work, but then I lose a lot of nice features. What's weirder, is that the Windows XP Mode installed with Windows Virtual PC (this is separate from my XP Pro VM) works with both ClearType and Integration Features just fine. I turned it on the same way and it works like a charm, no problems. I'm running Windows 7 Professional 64-bit as the host OS and have the latest (to my knowledge) Windows Virtual PC installed. The only funny business I can think of is that I've enabled 24-bit color via the Group Policy setting inside each XP virtual machine (both Pro and the stripped down XP mode copy). This is a fairly well-known trick documented all over the web, but here's a typical post about it.

Read the article
Skype Connect as SIP/Trunk for Asterisk

- by Kaurin

First off: I'm not sure if this should be on superuser or here. I have recently built a few Asterisk boxes with OpenVOX FXO/FXS ports little or no trouble. My current project is building an Asterisk box with SIP trunks. My current employer insisted on getting Skype Business/Skype connect for that purpose. After reviewing the Skype Connect plan, I agreed, because I thought it is going to be straightforward: Purchase G729 licences and setup SIP trunk/trunks. Boy was i wrong :) Here is the setup: The setup is for calling US numbers only via skype (we got skype US minute bundles in skype connect) AsteriskNOW - Asterisk 1.4 + asterisk-gui Trunks: SIP Trunk configured with Skype Connect - shows as registered Users: 2 test extensions. Both work fine when calling each other, voicemail etc works fine too The asterisk box is behind a Mikrotik router which i configured to forward all relevant ports: 5060-5090 UDP, 10000-20000 UDP. When trying out an extension outside of my LAN, it worked. I could make calls to the other extension. Outgoing rule: _NXXXXXXXXX Strip:0 Prepend:+1 Use skype trunk Inbound rule: Trunk: Skype Pattern: s Destination: Extension1 (6210) Here is the output of asterisk CLI (-rvvvvv) with outgoing calls: http://pastebin.com/eWVpL72e you can see the circuit-busy response when using trunk1 (skype) When calling my Skype Connect number from the outside, I get nothing in the logs. Can anyone with Skype Connect / Asterisk experience help out? :)

Read the article
Windows 7 deployment thru WDS

- by vn

Hello, I am deploying new systems on my network and I built my reference computer by installing the OS the manufacturers (Dell and a custom built system from some local business) gave with all drivers, installed all the desired applications. As for the settings part, I'm doing most of it thru GPOs. I want to image my reference computer and deploy it with WDS. i found several links on how to sysprep, but they're all doing it with some differences without explaining them. My questions : How do I manage (into sysprep) the domain join/computer naming part since (from what I understand) WDS manages that? How do I know/determine what I need to setup into my sysprep.xml? Can you sysprep a first time, try and if it fails, do some modifications and try again? I am thinking of doing a basis sysprep, checking what info can be automated and correct that in the answer file. What do I miss if skipping the "audit" mode? I don't plan on re-doing the reference computer... I read that when sysprepping, it resets settings from the reference computer like the computer name, activation/key and such... what setting is sysprep resetting by default that I should be aware of? I must admit I am quite lost about Win7, sysprep, RIS, MDI toolkit, WDS.. I understand the way of doing with XP, but it changed so much with Windows 7! The links I am reading are : http://far2paranoid.wordpress.com/2007/12/05/prep-for-sysprep/ http://blog.brianleejackson.com/sysprep-a-windows-7-machine-%E2%80%93-start-to-finish-v2 http://www.ehow.com/print/how_5392616_sysprep-machine-start-finish-v2.html Thank you VERY much for any answers, they are much appreciated.

Read the article
LAN->LAN IP translation (for TortoiseSVN + Artifacts + Buffalo router)

- by Armchair Bronco

Here's my scenario: I've got a VisualSVN server on my main dev box @ home. I'm also using Visual Studio 2010, TortoiseSVN, VisualSVN client (for source control), and Versioned 'Artifacts' (for bug tracking). (I had to modify the fake URL's below to use only one slash because as a new user, I can't post more than one real URL.) I've got my Buffalo AirStation WHR-HP-G300N router properly configured so my business partner can connect to the SVN server. I have port forwarding enabled for the internet-side IP address (like http:/99.888.77.66:443) which gets forwarded to an internal IP (like 192.168.11.6). This part is working great. The problem I'm having is with the integration piece between TortoiseSVN and my bug tracking system. I need to provide a bugtraq:url property, but I haven't been able to get relative paths to work. So I'm forced to use an absolute URL. On my end, I need to use the name of my server (for example: bugtraq:url = https:/my-server/svn/bla..), but this doesn't work for my partner. He needs to specify the IP address (for example: bugtraq:url = https:/999.888.77.66:443/svn/bla...) Is there a way to configure my router such that the IP address for this parameter gets re-routed/re-mapped to "https://my-server" if the request originates from the LAN itself? My router's software supports LAN-Internet and Internet-LAN, but I don't see LAN-LAN.

Read the article
SMTP Unreachable from Specific Networks

- by Jason George

I host my business site through a VPS account. The instance runs Ubuntu and I'm using POSTFIX+Dovecot as my mail server. For the most part, the mail server works fine. I have noticed, however, that I can not send mail from specific local networks. I noticed this at a client's office serval months ago. I can receive email, but any time I tried to send mail when connected to their network the connection would time out. Since I could send my mail after leaving, I chalked it up to improper network configuration and didn't worry about it. Unfortunately I've recently moved, switched service providers, and am forced to use the service providers router due to the special set-up they put in place to give me DSL in the sticks--well beyond the typical range for a DSL run. Now I'm unable to send email from home, which is a problem. I have tried sending email through my phone (using cellular service rather than my DSL) just to confirm the server is currently working. I'm not even sure where start debugging. Any ideas on how I might track down the issue would be greatly appreciated.

Read the article
Cannot print certain colours on Ubuntu with HP Laser Printer

- by ILMV

We have a load of machines running Ubuntu in our office, they are either on 8.04 or 9.10. We have a server which connects a HP JetDirect that connects to a HP 3550 Colour Laser printer using CUPS. The problem we are having is we cannot print red, magenta or yellow at 100%, I've got a picture of the Ubuntu test page to demonstrate my problem: This is obviously a pretty big problem as we are constantly receiving documents with these colours and cannot successfully print them off, we cannot just switch the grayscale, our business depends on being able to print colour (seems trivial but we handle lots of artwork). We're using the recommended driver HP Color LaserJet 3550 footmatic/pxljr (recommended), there is another driver in the list labelled HP Color LaserJet 3550 footmatic/hpijs. These are production printers so need to make sure any setting change won't kick is in the nuts. It would appear HPIJS is for HP Inkjets, makes sense I guess. The problem doesn't occur in Windows. RESOLVED I've managed to solve the problem, I did indeed use the HPIJS driver (apparently for inkjets) but it seems to have worked, we're going to roll with it for now to see how we get on with it.

Read the article
Windows 7 - system error 5 problem

- by Ian

My wife has just had a new computer for Christmas (with an upgrade from VISTA to Windows 7), and has joined the home network. We are using a mix of WindowsXP and Ubuntu boxes linked via a switch. We are all in the same workgroup. (No domain). Internet access, DHCP, and DNS server is an SME server that thinks it is domain controller (although we are not using a domain). I need to run a script to back up my wife's machine (venus). In the past the script creates a share on a machine with lots of space (leda), and then executes the line. PSEXEC \\venus -u admin -p adminpassword -c -f d:\Progs\snapshot.exe C: \\leda\Venus\C-drive.SNA With the wife's old XP machine, this would run the sysinternals utility, copy shapshot,exe to her machine and run it, which would then back up her C: drive to the share on leda. I cannot get this to work with Windows 7, nor can I link through to the C$ share on her machine. This gives me a permissions error (system error 5). The admin account is a full admin account. And yes - I do know the password. The ordinary shares on her machine work fine! I guess I'm missing something that Microsoft have built into Windows 7 - but what? The machine is running Windows 7 business, with windows firewall, AVG anti virus, and all the crap-ware you get with a new PC removed. Thanks

Read the article

Search Results

Search found 12449 results on 498 pages for 'ebs e business suite'.

Page 433/498 | < Previous Page | 429 430 431 432 433 434 435 436 437 438 439 440 | Next Page >

- by bbodenmiller

- by scape279

- by bwerks

- by mikepurvis

- by WickedGrey

- by cdonner

- by Sanoj

- by MattiasSN

- by Keith Sirmons

- by Adam Yanalunas

- by Andres

- by Bill Grey

- by Laykes

- by Cristi Diaconescu

- by user29600

- by Wesley

- by fostandy

- by Nishant Kumar

- by Yadyn

- by Kaurin

- by vn

- by Armchair Bronco

- by Jason George

- by ILMV

- by Ian

< Previous Page | 429 430 431 432 433 434 435 436 437 438 439 440 | Next Page >