explain plan - Page 434

Organizations & Architecture UNISA Studies – Chap 7

- by MarkPearl

Learning Outcomes Name different device categories Discuss the functions and structure of I/.O modules Describe the principles of Programmed I/O Describe the principles of Interrupt-driven I/O Describe the principles of DMA Discuss the evolution characteristic of I/O channels Describe different types of I/O interface Explain the principles of point-to-point and multipoint configurations Discuss the way in which a FireWire serial bus functions Discuss the principles of InfiniBand architecture External Devices An external device attaches to the computer by a link to an I/O module. The link is used to exchange control, status, and data between the I/O module and the external device. External devices can be classified into 3 categories… Human readable – e.g. video display Machine readable – e.g. magnetic disk Communications – e.g. wifi card I/O Modules An I/O module has two major functions… Interface to the processor and memory via the system bus or central switch Interface to one or more peripheral devices by tailored data links Module Functions The major functions or requirements for an I/O module fall into the following categories… Control and timing Processor communication Device communication Data buffering Error detection I/O function includes a control and timing requirement, to coordinate the flow of traffic between internal resources and external devices. Processor communication involves the following… Command decoding Data Status reporting Address recognition The I/O device must be able to perform device communication. This communication involves commands, status information, and data. An essential task of an I/O module is data buffering due to the relative slow speeds of most external devices. An I/O module is often responsible for error detection and for subsequently reporting errors to the processor. I/O Module Structure An I/O module functions to allow the processor to view a wide range of devices in a simple minded way. The I/O module may hide the details of timing, formats, and the electro mechanics of an external device so that the processor can function in terms of simple reads and write commands. An I/O channel/processor is an I/O module that takes on most of the detailed processing burden, presenting a high-level interface to the processor. There are 3 techniques are possible for I/O operations Programmed I/O Interrupt[t I/O DMA Access Programmed I/O When a processor is executing a program and encounters an instruction relating to I/O it executes that instruction by issuing a command to the appropriate I/O module. With programmed I/O, the I/O module will perform the requested action and then set the appropriate bits in the I/O status register. The I/O module takes no further actions to alert the processor. I/O Commands To execute an I/O related instruction, the processor issues an address, specifying the particular I/O module and external device, and an I/O command. There are four types of I/O commands that an I/O module may receive when it is addressed by a processor… Control – used to activate a peripheral and tell it what to do Test – Used to test various status conditions associated with an I/O module and its peripherals Read – Causes the I/O module to obtain an item of data from the peripheral and place it in an internal buffer Write – Causes the I/O module to take an item of data form the data bus and subsequently transmit that data item to the peripheral The main disadvantage of this technique is it is a time consuming process that keeps the processor busy needlessly I/O Instructions With programmed I/O there is a close correspondence between the I/O related instructions that the processor fetches from memory and the I/O commands that the processor issues to an I/O module to execute the instructions. Typically there will be many I/O devices connected through I/O modules to the system – each device is given a unique identifier or address – when the processor issues an I/O command, the command contains the address of the address of the desired device, thus each I/O module must interpret the address lines to determine if the command is for itself. When the processor, main memory and I/O share a common bus, two modes of addressing are possible… Memory mapped I/O Isolated I/O (for a detailed explanation read page 245 of book) The advantage of memory mapped I/O over isolated I/O is that it has a large repertoire of instructions that can be used, allowing more efficient programming. The disadvantage of memory mapped I/O over isolated I/O is that valuable memory address space is sued up. Interrupts driven I/O Interrupt driven I/O works as follows… The processor issues an I/O command to a module and then goes on to do some other useful work The I/O module will then interrupts the processor to request service when is is ready to exchange data with the processor The processor then executes the data transfer and then resumes its former processing Interrupt Processing The occurrence of an interrupt triggers a number of events, both in the processor hardware and in software. When an I/O device completes an I/O operations the following sequence of hardware events occurs… The device issues an interrupt signal to the processor The processor finishes execution of the current instruction before responding to the interrupt The processor tests for an interrupt – determines that there is one – and sends an acknowledgement signal to the device that issues the interrupt. The acknowledgement allows the device to remove its interrupt signal The processor now needs to prepare to transfer control to the interrupt routine. To begin, it needs to save information needed to resume the current program at the point of interrupt. The minimum information required is the status of the processor and the location of the next instruction to be executed. The processor now loads the program counter with the entry location of the interrupt-handling program that will respond to this interrupt. It also saves the values of the process registers because the Interrupt operation may modify these The interrupt handler processes the interrupt – this includes examination of status information relating to the I/O operation or other event that caused an interrupt When interrupt processing is complete, the saved register values are retrieved from the stack and restored to the registers Finally, the PSW and program counter values from the stack are restored. Design Issues Two design issues arise in implementing interrupt I/O Because there will be multiple I/O modules, how does the processor determine which device issued the interrupt? If multiple interrupts have occurred, how does the processor decide which one to process? Addressing device recognition, 4 general categories of techniques are in common use… Multiple interrupt lines Software poll Daisy chain Bus arbitration For a detailed explanation of these approaches read page 250 of the textbook. Interrupt driven I/O while more efficient than simple programmed I/O still requires the active intervention of the processor to transfer data between memory and an I/O module, and any data transfer must traverse a path through the processor. Thus is suffers from two inherent drawbacks… The I/O transfer rate is limited by the speed with which the processor can test and service a device The processor is tied up in managing an I/O transfer; a number of instructions must be executed for each I/O transfer Direct Memory Access When large volumes of data are to be moved, an efficient technique is direct memory access (DMA) DMA Function DMA involves an additional module on the system bus. The DMA module is capable of mimicking the processor and taking over control of the system from the processor. It needs to do this to transfer data to and from memory over the system bus. DMA must the bus only when the processor does not need it, or it must force the processor to suspend operation temporarily (most common – referred to as cycle stealing). When the processor wishes to read or write a block of data, it issues a command to the DMA module by sending to the DMA module the following information… Whether a read or write is requested using the read or write control line between the processor and the DMA module The address of the I/O device involved, communicated on the data lines The starting location in memory to read from or write to, communicated on the data lines and stored by the DMA module in its address register The number of words to be read or written, communicated via the data lines and stored in the data count register The processor then continues with other work, it delegates the I/O operation to the DMA module which transfers the entire block of data, one word at a time, directly to or from memory without going through the processor. When the transfer is complete, the DMA module sends an interrupt signal to the processor, this the processor is involved only at the beginning and end of the transfer. I/O Channels and Processors Characteristics of I/O Channels As one proceeds along the evolutionary path, more and more of the I/O function is performed without CPU involvement. The I/O channel represents an extension of the DMA concept. An I/O channel ahs the ability to execute I/O instructions, which gives it complete control over I/O operations. In a computer system with such devices, the CPU does not execute I/O instructions – such instructions are stored in main memory to be executed by a special purpose processor in the I/O channel itself. Two types of I/O channels are common A selector channel controls multiple high-speed devices. A multiplexor channel can handle I/O with multiple characters as fast as possible to multiple devices. The external interface: FireWire and InfiniBand Types of Interfaces One major characteristic of the interface is whether it is serial or parallel parallel interface – there are multiple lines connecting the I/O module and the peripheral, and multiple bits are transferred simultaneously serial interface – there is only one line used to transmit data, and bits must be transmitted one at a time With new generation serial interfaces, parallel interfaces are becoming less common. In either case, the I/O module must engage in a dialogue with the peripheral. In general terms the dialog may look as follows… The I/O module sends a control signal requesting permission to send data The peripheral acknowledges the request The I/O module transfers data The peripheral acknowledges receipt of data For a detailed explanation of FireWire and InfiniBand technology read page 264 – 270 of the textbook

Read the article

Install NPM Packages Automatically for Node.js on Windows Azure Web Site

- by Shaun

In one of my previous post I described and demonstrated how to use NPM packages in Node.js and Windows Azure Web Site (WAWS). In that post I used NPM command to install packages, and then use Git for Windows to commit my changes and sync them to WAWS git repository. Then WAWS will trigger a new deployment to host my Node.js application. Someone may notice that, a NPM package may contains many files and could be a little bit huge. For example, the “azure” package, which is the Windows Azure SDK for Node.js, is about 6MB. Another popular package “express”, which is a rich MVC framework for Node.js, is about 1MB. When I firstly push my codes to Windows Azure, all of them must be uploaded to the cloud. Is that possible to let Windows Azure download and install these packages for us? In this post, I will introduce how to make WAWS install all required packages for us when deploying. Let’s Start with Demo Demo is most straightforward. Let’s create a new WAWS and clone it to my local disk. Drag the folder into Git for Windows so that it can help us commit and push. Please refer to this post if you are not familiar with how to use Windows Azure Web Site, Git deployment, git clone and Git for Windows. And then open a command windows and install a package in our code folder. Let’s say I want to install “express”. And then created a new Node.js file named “server.js” and pasted the code as below. 1: var express = require("express"); 2: var app = express(); 3: 4: app.get("/", function(req, res) { 5: res.send("Hello Node.js and Express."); 6: }); 7: 8: console.log("Web application opened."); 9: app.listen(process.env.PORT); If we switch to Git for Windows right now we will find that it detected the changes we made, which includes the “server.js” and all files under “node_modules” folder. What we need to upload should only be our source code, but the huge package files also have to be uploaded as well. Now I will show you how to exclude them and let Windows Azure install the package on the cloud. First we need to add a special file named “.gitignore”. It seems cannot be done directly from the file explorer since this file only contains extension name. So we need to do it from command line. Navigate to the local repository folder and execute the command below to create an empty file named “.gitignore”. If the command windows asked for input just press Enter. 1: echo > .gitignore Now open this file and copy the content below and save. 1: node_modules Now if we switch to Git for Windows we will found that the packages under the “node_modules” were not in the change list. So now if we commit and push, the “express” packages will not be uploaded to Windows Azure. Second, let’s tell Windows Azure which packages it needs to install when deploying. Create another file named “package.json” and copy the content below into that file and save. 1: { 2: "name": "npmdemo", 3: "version": "1.0.0", 4: "dependencies": { 5: "express": "*" 6: } 7: } Now back to Git for Windows, commit our changes and push it to WAWS. Then let’s open the WAWS in developer portal, we will see that there’s a new deployment finished. Click the arrow right side of this deployment we can see how WAWS handle this deployment. Especially we can find WAWS executed NPM. And if we opened the log we can review what command WAWS executed to install the packages and the installation output messages. As you can see WAWS installed “express” for me from the cloud side, so that I don’t need to upload the whole bunch of the package to Azure. Open this website and we can see the result, which proved the “express” had been installed successfully. What’s Happened Under the Hood Now let’s explain a bit on what the “.gitignore” and “package.json” mean. The “.gitignore” is an ignore configuration file for git repository. All files and folders listed in the “.gitignore” will be skipped from git push. In the example below I copied “node_modules” into this file in my local repository. This means, do not track and upload all files under the “node_modules” folder. So by using “.gitignore” I skipped all packages from uploading to Windows Azure. “.gitignore” can contain files, folders. It can also contain the files and folders that we do NOT want to ignore. In the next section we will see how to use the un-ignore syntax to make the SQL package included. The “package.json” file is the package definition file for Node.js application. We can define the application name, version, description, author, etc. information in it in JSON format. And we can also put the dependent packages as well, to indicate which packages this Node.js application is needed. In WAWS, name and version is necessary. And when a deployment happened, WAWS will look into this file, find the dependent packages, execute the NPM command to install them one by one. So in the demo above I copied “express” into this file so that WAWS will install it for me automatically. I updated the dependencies section of the “package.json” file manually. But this can be done partially automatically. If we have a valid “package.json” in our local repository, then when we are going to install some packages we can specify “--save” parameter in “npm install” command, so that NPM will help us upgrade the dependencies part. For example, when I wanted to install “azure” package I should execute the command as below. Note that I added “--save” with the command. 1: npm install azure --save Once it finished my “package.json” will be updated automatically. Each dependent packages will be presented here. The JSON key is the package name while the value is the version range. Below is a brief list of the version range format. For more information about the “package.json” please refer here. Format Description Example version Must match the version exactly. "azure": "0.6.7" >=version Must be equal or great than the version. "azure": ">0.6.0" 1.2.x The version number must start with the supplied digits, but any digit may be used in place of the x. "azure": "0.6.x" ~version The version must be at least as high as the range, and it must be less than the next major revision above the range. "azure": "~0.6.7" * Matches any version. "azure": "*" And WAWS will install the proper version of the packages based on what you defined here. The process of WAWS git deployment and NPM installation would be like this. But Some Packages… As we know, when we specified the dependencies in “package.json” WAWS will download and install them on the cloud. For most of packages it works very well. But there are some special packages may not work. This means, if the package installation needs some special environment restraints it might be failed. For example, the SQL Server Driver for Node.js package needs “node-gyp”, Python and C++ 2010 installed on the target machine during the NPM installation. If we just put the “msnodesql” in “package.json” file and push it to WAWS, the deployment will be failed since there’s no “node-gyp”, Python and C++ 2010 in the WAWS virtual machine. For example, the “server.js” file. 1: var express = require("express"); 2: var app = express(); 3: 4: app.get("/", function(req, res) { 5: res.send("Hello Node.js and Express."); 6: }); 7: 8: var sql = require("msnodesql"); 9: var connectionString = "Driver={SQL Server Native Client 10.0};Server=tcp:tqy4c0isfr.database.windows.net,1433;Database=msteched2012;Uid=shaunxu@tqy4c0isfr;Pwd=P@ssw0rd123;Encrypt=yes;Connection Timeout=30;"; 10: app.get("/sql", function (req, res) { 11: sql.open(connectionString, function (err, conn) { 12: if (err) { 13: console.log(err); 14: res.send(500, "Cannot open connection."); 15: } 16: else { 17: conn.queryRaw("SELECT * FROM [Resource]", function (err, results) { 18: if (err) { 19: console.log(err); 20: res.send(500, "Cannot retrieve records."); 21: } 22: else { 23: res.json(results); 24: } 25: }); 26: } 27: }); 28: }); 29: 30: console.log("Web application opened."); 31: app.listen(process.env.PORT); The “package.json” file. 1: { 2: "name": "npmdemo", 3: "version": "1.0.0", 4: "dependencies": { 5: "express": "*", 6: "msnodesql": "*" 7: } 8: } And it failed to deploy to WAWS. From the NPM log we can see it’s because “msnodesql” cannot be installed on WAWS. The solution is, in “.gitignore” file we should ignore all packages except the “msnodesql”, and upload the package by ourselves. This can be done by use the content as below. We firstly un-ignored the “node_modules” folder. And then we ignored all sub folders but need git to check each sub folders. And then we un-ignore one of the sub folders named “msnodesql” which is the SQL Server Node.js Driver. 1: !node_modules/ 2: 3: node_modules/* 4: !node_modules/msnodesql For more information about the syntax of “.gitignore” please refer to this thread. Now if we go to Git for Windows we will find the “msnodesql” was included in the uncommitted set while “express” was not. I also need remove the dependency of “msnodesql” from “package.json”. Commit and push to WAWS. Now we can see the deployment successfully done. And then we can use the Windows Azure SQL Database from our Node.js application through the “msnodesql” package we uploaded. Summary In this post I demonstrated how to leverage the deployment process of Windows Azure Web Site to install NPM packages during the publish action. With the “.gitignore” and “package.json” file we can ignore the dependent packages from our Node.js and let Windows Azure Web Site download and install them while deployed. For some special packages that cannot be installed by Windows Azure Web Site, such as “msnodesql”, we can put them into the publish payload as well. With the combination of Windows Azure Web Site, Node.js and NPM it makes even more easy and quick for us to develop and deploy our Node.js application to the cloud. Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

Read the article

Enabling XML-documentation for code contracts

- by DigiMortal

One nice feature that code contracts offer is updating of code documentation. If you are using source code documenting features of Visual Studio then code contracts may automate some tasks you otherwise have to implement manually. In this posting I will show you some XML documentation files with documented contracts. I will also explain how this feature works. Enabling XML-documentation in project settings As a first thing let’s enable generating of code documentation under project settings. Open project properties, move to Build page and make check to checkbox called “XML documentation file”. Save project settings and rebuild project. When project is built go to bin/Debug folder and open the XML-file. Here is my XML. <?xml version="1.0"?> <doc> <assembly> <name>Eneta.Examples.CodeContracts.Testable</name> </assembly> <members> <member name="T:Eneta.Examples.CodeContracts.Testable.Randomizer"> <summary> Class for generating random integers in user specified range. </summary> </member> <member name="M:Eneta.Examples.CodeContracts.Testable.Randomizer.#ctor(Eneta.Examples.CodeContracts.Testable.IRandomGenerator)"> <summary> Constructor of Randomizer. Initializes Randomizer class. </summary> <param name="generator">Instance of random number generator.</param> </member> <member name="M:Eneta.Examples.CodeContracts.Testable.Randomizer.GetRandomFromRangeContracted(System.Int32,System.Int32)"> <summary> Returns random integer in given range. </summary> <param name="min">Minimum value of random integer.</param> <param name="max">Maximum value of random integer.</param> </member> </members> </doc> You can see nothing about code contracts here. Enabling code contracts documentation Code contracts have their own settings and conditions for documentation. Open project properties and move to Code Contracts tab. From “Contract Reference Assembly” dropdown check Build and make check to checkbox “Emit contracts into XML doc file”. And again – save project setting, build the project and move to bin/Debug folder. Now you can see that there are two files for XML-documentation: <assembly name>.XML <assembly name>.old.XML First files is documentation with contracts, second file is original documentation without contracts. Let’s see now what is inside our new XML-documentation file. <?xml version="1.0"?> <doc> <assembly> <name>Eneta.Examples.CodeContracts.Testable</name> </assembly> <members> <member name="T:Eneta.Examples.CodeContracts.Testable.Randomizer"> <summary> Class for generating random integers in user specified range. </summary> </member> <member name="M:Eneta.Examples.CodeContracts.Testable.Randomizer.#ctor(Eneta.Examples.CodeContracts.Testable.IRandomGenerator)"> <summary> Constructor of Randomizer. Initializes Randomizer class. </summary> <param name="generator">Instance of random number generator.</param> </member> <member name="M:Eneta.Examples.CodeContracts.Testable.Randomizer.GetRandomFromRangeContracted(System.Int32,System.Int32)"> <summary> Returns random integer in given range. </summary> <param name="min">Minimum value of random integer.</param> <param name="max">Maximum value of random integer.</param> <requires description="Min must be less than max" exception="T:System.ArgumentOutOfRangeException"> min < max</requires> <exception cref="T:System.ArgumentOutOfRangeException"> min >= max</exception> <ensures description="Return value is out of range"> Contract.Result<int>() >= min && Contract.Result<int>() <= max</ensures> </member> </members> </doc> As you can see then code contracts are pretty well documented. Messages that I provided with code contracts are also available in documentation. If I wrote very good and informative messages then these messages are very useful also in contracts documentation. Code contracts and Sandcastle Sandcastle knows nothing about code contracts by default. There is separate package of file for Sandcastle that is provided you by code contracts installation. You can read from code contracts manual: “Sandcastle (http://www.codeplex.com/Sandcastle) is a freely available tool that generates help les and web sites describing your APIs, based on the XML doc comments in your source code. The CodeContracts install contains a set of les that can be copied over a Sandcastle installation to take advantage of the additional contract information. The produced documentation adds a contract section to methods with declared requires and/or ensures. In order for Sandcastle to produce Contract sections, you need to patch a number of files in its installation. Please refer to the Sandcastle Readme.txt found under Start Menu/CodeContracts/Sandcastle for instructions. A future release of Sandcastle will hopefully support contract sections without the need for this patching step.” Integrating code contracts documentation to Sandcastle will be one of my next postings about code contracts. Conclusion if you are using code documentation then documentation about code contracts can be added to documentation very easily. All you have to do is to enable XML-documentation for contracts and build your project. Later you can use Sandcastle files provided by code contracts installer to integrate contracts documentation to your output documentation package.

Read the article

Day 6 - Game Menuing Woes and Future Screen Sneak Peeks

- by dapostolov

So, after my last post on Day 5 I dabbled with my game class design. I took the approach where each game objects is tightly coupled with a graphic. The good news is I got the menu working but not without some hard knocks and game growing pains. I'll explain later, but for now...here is a class diagram of my first stab at my class structure and some code... Ok, there are few mistakes, however, I'm going to leave it as is for now... As you can see I created an inital abstract base class called GameSprite. This class when inherited will provide a simple virtual default draw method: public virtual void DrawSprite(SpriteBatch spriteBatch) { spriteBatch.Draw(Sprite, Position, Color.White); } The benefits of coding it this way allows me to inherit the class and utilise the method in the screen draw method...So regardless of what the graphic object type is it will now have the ability to render a static image on the screen. Example: public class MyStaticTreasureChest : GameSprite {} If you remember the window draw method from Day 3's post, we could use the above code as follows... protected override void Draw(GameTime gameTime) { GraphicsDevice.Clear(Color.CornflowerBlue); spriteBatch.Begin(SpriteBlendMode.AlphaBlend); foreach(var gameSprite in ListOfGameObjects) { gameSprite.DrawSprite(spriteBatch); } spriteBatch.End(); base.Draw(gameTime); } I have to admit the GameSprite object is pretty plain as with its DrawSprite method... But ... we now have the ability to render 3 static menu items on the screen ... BORING! I want those menu items to do something exciting, which of course involves animation... So, let's have a peek at AnimatedGameSprite in the above game diagram. The idea with the AnimatedGameSprite is that it has an image to animate...such as ... characters, fireballs, and... menus! So after inheriting from GameSprite class, I added a few more options such as UpdateSprite... public virtual void UpdateSprite(float elapsed) { _totalElapsed += elapsed; if (_totalElapsed > _timePerFrame) { _frame++; _frame = _frame % _framecount; _totalElapsed -= _timePerFrame; } } And an overidden DrawSprite... public override void DrawSprite(SpriteBatch spriteBatch) { int FrameWidth = Sprite.Width / _framecount; Rectangle sourcerect = new Rectangle(FrameWidth * _frame, 0, FrameWidth, Sprite.Height); spriteBatch.Draw(Sprite, Position, sourcerect, Color.White, _rotation, _origin, _scale, SpriteEffects.None, _depth); } With these two methods...I can animate and image, all I had to do was add a few more lines to the screens Update Method (From Day 3), like such: float elapsed = (float) gameTime.ElapsedGameTime.TotalSeconds; foreach (var item in ListOfAnimatedGameObjects) { item.UpdateSprite(elapsed); } And voila! My images begin to animate in one spot, on the screen... Hmm, but how do I interact with the menu items using a mouse...well the mouse cursor was easy enough... this.IsMouseVisible = true; But, to have it "interact" with an image was a bit more tricky...I had to perform collision detection! mouseStateCurrent = Mouse.GetState(); var uiEnabledSprites = (from s in menuItems where s.IsEnabled select s).ToList(); foreach (var item in uiEnabledSprites) { var r = new Rectangle((int)item.Position.X, (int)item.Position.Y, item.Sprite.Width, item.Sprite.Height); item.MenuState = MenuState.Normal; if (r.Intersects(new Rectangle(mouseStateCurrent.X, mouseStateCurrent.Y, 0, 0))) { item.MenuState = MenuState.Hover; if (mouseStatePrevious.LeftButton == ButtonState.Pressed && mouseStateCurrent.LeftButton == ButtonState.Released) { item.MenuState = MenuState.Pressed; } } } mouseStatePrevious = mouseStateCurrent; So, basically, what it is doing above is iterating through all my interactive objects and detecting a rectangle collision and the object , plays the state animation (or static image). Lessons Learned, Time Burned... So, I think I did well to start, but after I hammered out my prototype...well...things got sloppy and I began to realise some design flaws... At the time: I couldn't seem to figure out how to open another window, such as the character creation screen Input was not event based and it was bugging me My menu design relied heavily on mouse input and I couldn't use keyboard. Mouse input, is tightly bound with graphic rendering / positioning, so its logic will have to be in each scene. Menu animations would stop mid frame, then continue when the action occured again. This is bad, because...what if I had a sword sliding onthe screen? Then it would slide a quarter of the way, then stop due to another action, then render again mid-slide... it just looked sloppy. Menu, Solved!? To solve the above problems I did a little research and I found some great code in the XNA forums. The one worth mentioning was the GameStateManagementSample. With this sample, you can create a basic "text based" menu system which allows you to swap screens, popup screens, play the game, and quit....basic game state management... In my next post I'm going to dwelve a bit more into this code and adapt it with my code from this prototype. Text based menus just won't cut it for me, for now...however, I'm still going to stick with my animated menu item idea. A sneak peek using the Game State Management Sample...with no changes made... Cool Things to Mention: At work ... I tend to break out in random conversations every-so-often and I get talking about some of my challenges with this game (or some stupid observation about something... stupid) During one conversation I was discussing how I should animate my images; I explained that I knew I had to use the Update method provided, but I didn't know how (at the time) to render an image at an appropriate "pace" and how many frames to use, etc.. I also got thinking that if a machine rendered my images faster / slower, that was surely going to f-up my animations. To which a friend, Sheldon, answered, surely the Draw method is like a camera taking a snapshot of a scene in time. Then it clicked...I understood the big picture of the game engine... After some research I discovered that the Draw method attempts to keep a framerate of 60 fps. From what I understand, the game engine will even leave out a few calls to the draw method if it begins to slow down. This is why we want to put our sprite updates in the update method. Then using a game timer (provided by the engine), we want to render the scene based on real time passed, not framerate. So even the engine renders at 20 fps, the animations will still animate at the same real time speed! Which brings up another point. Why 60 fps? I'm speculating that Microsoft capped it because LCD's dont' refresh faster than 60 fps? On another note, If the game engine knows its falling behind in rendering...then surely we can harness this to speed up our games. Maybe I can find some flag which tell me if the game is lagging, and what the current framerate is, etc...(instead of coding it like I did last time) Sheldon, suggested maybe I can render like WoW does, in prioritised layers...I think he's onto something, however I don't think I'll have that many graphics to worry about such a problem of graphic latency. We'll see. People to Mention: Well,as you are aware I hadn't posted in a couple days and I was surprised to see a few emails and messenger queries about my game progress (and some concern as to why I stopped). I want to thank everyone for their kind words of support and put everyone at ease by stating that I do intend on completing this project. Granted I only have a few hours each night, but, I'll do it. Thank you to Garth for mailing in my next screen! That was a nice surprise! The Sneek Peek you've been waiting for... Garth has also volunteered to render me some wizard images. He was a bit shocked when I asked for them in 2D animated strips. He said I was going backward (and that I have really bad Game Development Lingo). But, I advised Garth that I will use 3D images later...for now...2D images. Garth also had some great game design ideas to add on. I advised him that I will save his ideas and include them in the future design document (for the 3d version?). Lastly, my best friend Alek, is going to join me in developing this game. This was a project we started eons ago but never completed because of our careers. Now, priorities change and we have some spare time on our hands. Let's see what trouble Alek and I can get into! Tonight I'll be uploading my prototypes and base game to a source control for both of us to work off of. D.

Read the article

Issue 15: Oracle Exadata Marketing Campaigns

- by rituchhibber

PARTNER FOCUS Oracle ExadataMarketing Campaign Steve McNickleVP Europe, cVidya Steve McNickle is VP Europe for cVidya, an innovative provider of revenue intelligence solutions for telecom, media and entertainment service providers including AT&T, BT, Deutsche Telecom and Vodafone. The company's product portfolio helps operators and service providers maximise margins, improve customer experience and optimise ecosystem relationships through revenue assurance, fraud and security management, sales performance management, pricing analytics, and inter-carrier services. cVidya has partnered with Oracle for more than a decade. RESOURCES -- Oracle PartnerNetwork (OPN) Oracle Exastack Program Oracle Exastack Optimized Oracle Exastack Labs and Enablement Resources Oracle Engineered Systems Oracle Communications cVidya SUBSCRIBE FEEDBACK PREVIOUS ISSUES Are you ready for Oracle OpenWorld this October? -- -- Please could you tell us a little about cVidya's partnering history with Oracle, and expand on your Oracle Exastack accreditations? "cVidya was established just over ten years ago and we've had a strong relationship with Oracle almost since the very beginning. Through our Revenue Intelligence work with some of the world's largest service providers we collect tremendous amounts of information, amounting to billions of records per day. We help our clients to collect, store and analyse that data to ensure that their end customers are getting the best levels of service, are billed correctly, and are happy that they are on the correct price plan. We have been an Oracle Gold level partner for seven years, and crucially just two months ago we were also accredited as Oracle Exastack Optimized for MoneyMap, our core Revenue Assurance solution. Very soon we also expect to be Oracle Exastack Optimized DRMap, our Data Retention solution." What unique capabilities and customer benefits does Oracle Exastack add to your applications? "Oracle Exastack enables us to deliver radical benefits to our customers. A typical mobile operator in the UK might handle between 500 million and two billion call data record details daily. Each transaction needs to be validated, billed correctly and fraud checked. Because of the enormous volumes involved, our clients demand scalable infrastructure that allows them to efficiently acquire, store and process all that data within controlled cost, space and environmental constraints. We have proved that the Oracle Exadata system can process data up to seven times faster and load it as much as 20 times faster than other standard best-of-breed server approaches. With the Oracle Exadata Database Machine they can reduce their datacentre equipment from say, the six or seven cabinets that they needed in the past, down to just one. This dramatic simplification delivers incredible value to the customer by cutting down enormously on all of their significant cost, space, energy, cooling and maintenance overheads." "The Oracle Exastack Program has given our clients the ability to switch their focus from reactive to proactive. Traditionally they may have spent 80 percent of their day processing, and just 20 percent enabling end customers to see advanced analytics, and avoiding issues before they occur. With our solutions and Oracle Exadata they can now switch that balance around entirely, resulting not only in reduced revenue leakage, but a far higher focus on proactive leakage prevention. How has the Oracle Exastack Program transformed your customer business? "We can already see the impact. Oracle solutions allow our delivery teams to achieve successful deployments, happy customers and self-satisfaction, and the power of Oracle's Exa solutions is easy to measure in terms of their transformational ability. We gained our first sale into a major European telco by demonstrating the major performance gains that would transform their business. Clients can measure the ease of organisational change, the early prevention of business issues, the reduction in manpower required to provide protection and coverage across all their products and services, plus of course end customer satisfaction. If customers know that that service is provided accurately and that their bills are calculated correctly, then over time this satisfaction can be attributed to revenue intelligence and the underlying systems which provide it. Combine this with the further integration we have with the other layers of the Oracle stack, including the telecommunications offerings such as NCC, OCDM and BRM, and the result is even greater customer value—not to mention the increased speed to market and the reduced project risk." What does the Oracle Exastack community bring to cVidya, both in terms of general benefits, and also tangible new opportunities and partnerships? "A great deal. We have participated in the Oracle Exastack community heavily over the past year, and have had lots of meetings with Oracle and our peers around the globe. It brings us into contact with like-minded, innovative partners, who like us are not happy to just stand still and want to take fresh technology to their customer base in order to gain enhanced value. We identified three new partnerships in each of two recent meetings, and hope these will open up new opportunities, not only in areas that exactly match where we operate today, but also in some new associative areas that will expand our reach into new business sectors. Notably, thanks to the Exastack community we were invited on stage at last year's Oracle OpenWorld conference. Appearing so publically with Oracle senior VP Judson Althoff elevated awareness and visibility of cVidya and has enabled us to participate in a number of other events with Oracle over the past eight months. We've been involved in speaking opportunities, forums and exhibitions, providing us with invaluable opportunities that we wouldn't otherwise have got close to." How has Exastack differentiated cVidya as an ISV, and helped you to evolve your business to the next level? "When we are selling to our core customer base of Tier 1 telecommunications providers, we know that they want more than just software. They want an enduring partnership that will last many years, they want innovation, and a forward thinking partner who knows how to guide them on where they need to be to meet market demand three, five or seven years down the line. Membership of respected global bodies, such as the Telemanagement Forum enables us to lead standard adherence in our area of business, giving us a lot of credibility, but Oracle is also involved in this forum with its own telecommunications portfolio, strengthening our position still further. When we approach CEOs, CTOs and CIOs at the very largest Tier 1 operators, not only can we easily show them that our technology is fantastic, we can also talk about our strong partnership with Oracle, and our joint embracing of today's standards and tomorrow's innovation." Where would you like cVidya to be in one year's time? "We want to get all of our relevant products Oracle Exastack Optimized. Our MoneyMap Revenue Assurance solution is already Exastack Optimised, our DRMAP Data Retention Solution should be Exastack Optimised within the next month, and our FraudView Fraud Management solution within the next two to three months. We'd then like to extend our Oracle accreditation out to include other members of the Oracle Engineered Systems family. We are moving into the 'Big Data' space, and so we're obviously very keen to work closely with Oracle to conduct pilots, map new technologies onto Oracle Big Data platforms, and embrace and measure the benefits of other Oracle systems, namely Oracle Exalogic Elastic Cloud, the Oracle Exalytics In-Memory Machine and the Oracle SPARC SuperCluster. We would also like to examine how the Oracle Database Appliance might benefit our Tier 2 service provider customers. Finally, we'd also like to continue working with the Oracle Communications Global Business Unit (CGBU), furthering our integration with Oracle billing products so that we are able to quickly deploy fraud solutions into Oracle's Engineered System stack, give operational benefits to our clients that are pre-integrated, more cost-effective, and can be rapidly deployed rapidly and producing benefits in three months, not nine months." Chris Baker ,Senior Vice President, Oracle Worldwide ISV-OEM-Java Sales Chris Baker is the Global Head of ISV/OEM Sales responsible for working with ISV/OEM partners to maximise Oracle's business through those partners, whilst maximising those partners' business to their end users. Chris works with partners, customers, innovators, investors and employees to develop innovative business solutions using Oracle products, services and skills. Firstly, could you please explain Oracle's current strategy for ISV partners, globally and in EMEA? "Oracle customers use independent software vendor (ISV) applications to run their businesses. They use them to generate revenue and to fulfil obligations to their own customers. Our strategy is very straight-forward. We want all of our ISV partners and OEMs to concentrate on the things that they do the best – building applications to meet the unique industry and functional requirements of their customer. We want to ensure that we deliver a best in class application platform so the ISV is free to concentrate their effort on their application functionality and user experience We invest over four billion dollars in research and development every year, and we want our ISVs to benefit from all of that investment in operating systems, virtualisation, databases, middleware, engineered systems, and other hardware. By doing this, we help them to reduce their costs, gain more consistency and agility for quicker implementations, and also rapidly differentiate themselves from other application vendors. It's all about simplification because we believe that around 25 to 30 percent of the development costs incurred by many ISVs are caused by customising infrastructure and have nothing to do with their applications. Our strategy is to enable our ISV partners to standardise their application platform using engineered architecture, so they can write once to the Oracle stack and deploy seamlessly in the cloud, on-premise, or in hybrid deployments. It's really important that architecture is the same in order to keep cost and time overheads at a minimum, so we provide standardisation and an environment that enables our ISVs to concentrate on the core business that makes them the most money and brings them success." How do you believe this strategy is helping the ISVs to work hand-in-hand with Oracle to ensure that end customers get the industry-leading solutions that they need? "We work with our ISVs not just to help them be successful, but also to help them market themselves. We have something called the 'Oracle Exastack Ready Program', which enables ISVs to publicise themselves as 'Ready' to run the core software platforms that run on Oracle's engineered systems including Exadata and Exalogic. So, for example, they can become 'Database Ready' which means that they use the latest version of Oracle Database and therefore can run their application without modification on Exadata or the Oracle Database Appliance. Alternatively, they can become WebLogic Ready, Oracle Linux Ready and Oracle Solaris Ready which means they run on the latest release and therefore can run their application, with no new porting work, on Oracle Exalogic. Those 'Ready' logos are important in helping ISVs advertise to their customers that they are using the latest technologies which have been fully tested. We now also have Exadata Ready and Exalogic Ready programmes which allow ISVs to promote the certification of their applications on these platforms. This highlights these partners to Oracle customers as having solutions that run fluently on the Oracle Exadata Database Machine, the Oracle Exalogic Elastic Cloud or one of our other engineered systems. This makes it easy for customers to identify solutions and provides ISVs with an avenue to connect with Oracle customers who are rapidly adopting engineered systems. We have also taken this programme to the next level in the shape of 'Oracle Exastack Optimized' for partners whose applications run best on the Oracle stack and have invested the time to fully optimise application performance. We ensure that Exastack Optimized partner status is promoted and supported by press releases, and we help our ISVs go to market and differentiate themselves through the use our technology and the standardisation it delivers. To date we have had several hundred organisations successfully work through our Exastack Optimized programme." How does Oracle's strategy of offering pre-integrated open platform software and hardware allow ISVs to bring their products to market more quickly? "One of the problems for many ISVs is that they have to think very carefully about the technology on which their solutions will be deployed, particularly in the cloud or hosted environments. They have to think hard about how they secure these environments, whether the concern is, for example, middleware, identity management, or securing personal data. If they don't use the technology that we build-in to our products to help them to fulfil these roles, they then have to build it themselves. This takes time, requires testing, and must be maintained. By taking advantage of our technology, partners will now know that they have a standard platform. They will know that they can confidently talk about implementation being the same every time they do it. Very large ISV applications could once take a year or two to be implemented at an on-premise environment. But it wasn't just the configuration of the application that took the time, it was actually the infrastructure - the different hardware configurations, operating systems and configurations of databases and middleware. Now we strongly believe that it's all about standardisation and repeatability. It's about making sure that our partners can do it once and are then able to roll it out many different times using standard componentry." What actions would you recommend for existing ISV partners that are looking to do more business with Oracle and its customer base, not only to maximise benefits, but also to maximise partner relationships? "My team, around the world and in the EMEA region, is available and ready to talk to any of our ISVs and to explore the possibilities together. We run programmes like 'Excite' and 'Insight' to help us to understand how we can help ISVs with architecture and widen their environments. But we also want to work with, and look at, new opportunities - for example, the Machine-to-Machine (M2M) market or 'The Internet of Things'. Over the next few years, many millions, indeed billions of devices will be collecting massive amounts of data and communicating it back to the central systems where ISVs will be running their applications. The only way that our partners will be able to provide a single vendor 'end-to-end' solution is to use Oracle integrated systems at the back end and Java on the 'smart' devices collecting the data – a complete solution from device to data centre. So there are huge opportunities to work closely with our ISVs, using Oracle's complete M2M platform, to provide the infrastructure that enables them to extract maximum value from the data collected. If any partners don't know where to start or who to contact, then they can contact me directly at [email protected] or indeed any of our teams across the EMEA region. We want to work with ISVs to help them to be as successful as they possibly can through simplification and speed to market, and we also want all of the top ISVs in the world based on Oracle." What opportunities are immediately opened to new ISV partners joining the OPN? "As you know OPN is very, very important. New members will discover a huge amount of content that instantly becomes accessible to them. They can access a wealth of no-cost training and enablement materials to build their expertise in Oracle technology. They can download Oracle software and use it for development projects. They can help themselves become more competent by becoming part of a true community and uncovering new opportunities by working with Oracle and their peers in the Oracle Partner Network. As well as publishing massive amounts of information on OPN, we also hold our global Oracle OpenWorld event, at which partners play a huge role. This takes place at the end of September and the beginning of October in San Francisco. Attending ISV partners have an unrivalled opportunity to contribute to elements such as the OpenWorld / OPN Exchange, at which they can talk to other partners and really begin thinking about how they can move their businesses on and play key roles in a very large ecosystem which revolves around technology and standardisation." Finally, are there any other messages that you would like to share with the Oracle ISV community? "The crucial message that I always like to reinforce is architecture, architecture and architecture! The key opportunities that ISVs have today revolve around standardising their architectures so that they can confidently think: “I will I be able to do exactly the same thing whenever a customer is looking to deploy on-premise, hosted or in the cloud”. The right architecture is critical to being competitive and to really start changing the game. We want to help our ISV partners to do just that; to establish standard architecture and to seize the opportunities it opens up for them. New market opportunities like M2M are enormous - just look at how many devices are all around you right now. We can help our partners to interface with these devices more effectively while thinking about their entire ecosystem, rather than just the piece that they have traditionally focused upon. With standardised architecture, we can help people dramatically improve their speed, reach, agility and delivery of enhanced customer satisfaction and value all the way from the Java side to their centralised systems. All Oracle ISV partners must take advantage of these opportunities, which is why Oracle will continue to invest in and support them." -- Gergely Strbik is Oracle Hardware and Software Product Manager for Avnet in Hungary. Avnet Technology Solutions is an OracleValue Added Distributor focused on the development of the existing Oracle channel. This includes the recruitment and enablement of Oracle partners as well as driving deeper adoption of Oracle's technology and application products within the IT channel. "The main business benefits of ODA for our customers and partners are scalability, flexibility, a great price point for the high performance delivered, and the easily configurable embedded Linux operating system. People welcome a lower point of entry and the ability to grow capacity on demand as their business expands." "Marketing and selling the ODA requires another way of thinking because it is an appliance. We have to transform the ways in which our partners and customers think from buying hardware and software independently to buying complete solutions. Successful early adopters and satisfied customer reactions will certainly help us to sell the ODA. We will have more experience with the product after the first deliveries and installations—end users need to see the power and benefits for themselves." "Our typical ODA customers will be those looking for complete solutions from a single reseller partner who is also able to manage the appliance. They will have enjoyed using Oracle Database but now want a new product that is able to unlock new levels of performance. A higher proportion of potential customers will come from our existing Oracle base, with around 30% from new business, but we intend to evangelise the ODA on the market to see how we can change this balance as all our customers adjust to the concept of 'Hardware and Software, Engineered to Work Together'. -- Back to the welcome page

Read the article

Adding and accessing custom sections in your C# App.config

- by deadlydog

So I recently thought I’d try using the app.config file to specify some data for my application (such as URLs) rather than hard-coding it into my app, which would require a recompile and redeploy of my app if one of our URLs changed. By using the app.config it allows a user to just open up the .config file that sits beside their .exe file and edit the URLs right there and then re-run the app; no recompiling, no redeployment necessary. I spent a good few hours fighting with the app.config and looking at examples on Google before I was able to get things to work properly. Most of the examples I found showed you how to pull a value from the app.config if you knew the specific key of the element you wanted to retrieve, but it took me a while to find a way to simply loop through all elements in a section, so I thought I would share my solutions here. Simple and Easy The easiest way to use the app.config is to use the built-in types, such as NameValueSectionHandler. For example, if we just wanted to add a list of database server urls to use in my app, we could do this in the app.config file like so: 1: <?xml version="1.0" encoding="utf-8" ?> 2: <configuration> 3: <configSections> 4: <section name="ConnectionManagerDatabaseServers" type="System.Configuration.NameValueSectionHandler" /> 5: </configSections> 6: <startup> 7: <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.5" /> 8: </startup> 9: <ConnectionManagerDatabaseServers> 10: <add key="localhost" value="localhost" /> 11: <add key="Dev" value="Dev.MyDomain.local" /> 12: <add key="Test" value="Test.MyDomain.local" /> 13: <add key="Live" value="Prod.MyDomain.com" /> 14: </ConnectionManagerDatabaseServers> 15: </configuration> And then you can access these values in code like so: 1: string devUrl = string.Empty; 2: var connectionManagerDatabaseServers = ConfigurationManager.GetSection("ConnectionManagerDatabaseServers") as NameValueCollection; 3: if (connectionManagerDatabaseServers != null) 4: { 5: devUrl = connectionManagerDatabaseServers["Dev"].ToString(); 6: } Sometimes though you don’t know what the keys are going to be and you just want to grab all of the values in that ConnectionManagerDatabaseServers section. In that case you can get them all like this: 1: // Grab the Environments listed in the App.config and add them to our list. 2: var connectionManagerDatabaseServers = ConfigurationManager.GetSection("ConnectionManagerDatabaseServers") as NameValueCollection; 3: if (connectionManagerDatabaseServers != null) 4: { 5: foreach (var serverKey in connectionManagerDatabaseServers.AllKeys) 6: { 7: string serverValue = connectionManagerDatabaseServers.GetValues(serverKey).FirstOrDefault(); 8: AddDatabaseServer(serverValue); 9: } 10: } And here we just assume that the AddDatabaseServer() function adds the given string to some list of strings. So this works great, but what about when we want to bring in more values than just a single string (or technically you could use this to bring in 2 strings, where the “key” could be the other string you want to store; for example, we could have stored the value of the Key as the user-friendly name of the url). More Advanced (and more complicated) So if you want to bring in more information than a string or two per object in the section, then you can no longer simply use the built-in System.Configuration.NameValueSectionHandler type provided for us. Instead you have to build your own types. Here let’s assume that we again want to configure a set of addresses (i.e. urls), but we want to specify some extra info with them, such as the user-friendly name, if they require SSL or not, and a list of security groups that are allowed to save changes made to these endpoints. So let’s start by looking at the app.config: 1: <?xml version="1.0" encoding="utf-8" ?> 2: <configuration> 3: <configSections> 4: <section name="ConnectionManagerDataSection" type="ConnectionManagerUpdater.Data.Configuration.ConnectionManagerDataSection, ConnectionManagerUpdater" /> 5: </configSections> 6: <startup> 7: <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.5" /> 8: </startup> 9: <ConnectionManagerDataSection> 10: <ConnectionManagerEndpoints> 11: <add name="Development" address="Dev.MyDomain.local" useSSL="false" /> 12: <add name="Test" address="Test.MyDomain.local" useSSL="true" /> 13: <add name="Live" address="Prod.MyDomain.com" useSSL="true" securityGroupsAllowedToSaveChanges="ConnectionManagerUsers" /> 14: </ConnectionManagerEndpoints> 15: </ConnectionManagerDataSection> 16: </configuration> The first thing to notice here is that my section is now using the type “ConnectionManagerUpdater.Data.Configuration.ConnectionManagerDataSection” (the fully qualified path to my new class I created) “, ConnectionManagerUpdater” (the name of the assembly my new class is in). Next, you will also notice an extra layer down in the <ConnectionManagerDataSection> which is the <ConnectionManagerEndpoints> element. This is a new collection class that I created to hold each of the Endpoint entries that are defined. Let’s look at that code now: 1: using System; 2: using System.Collections.Generic; 3: using System.Configuration; 4: using System.Linq; 5: using System.Text; 6: using System.Threading.Tasks; 7: 8: namespace ConnectionManagerUpdater.Data.Configuration 9: { 10: public class ConnectionManagerDataSection : ConfigurationSection 11: { 12: /// <summary> 13: /// The name of this section in the app.config. 14: /// </summary> 15: public const string SectionName = "ConnectionManagerDataSection"; 16: 17: private const string EndpointCollectionName = "ConnectionManagerEndpoints"; 18: 19: [ConfigurationProperty(EndpointCollectionName)] 20: [ConfigurationCollection(typeof(ConnectionManagerEndpointsCollection), AddItemName = "add")] 21: public ConnectionManagerEndpointsCollection ConnectionManagerEndpoints { get { return (ConnectionManagerEndpointsCollection)base[EndpointCollectionName]; } } 22: } 23: 24: public class ConnectionManagerEndpointsCollection : ConfigurationElementCollection 25: { 26: protected override ConfigurationElement CreateNewElement() 27: { 28: return new ConnectionManagerEndpointElement(); 29: } 30: 31: protected override object GetElementKey(ConfigurationElement element) 32: { 33: return ((ConnectionManagerEndpointElement)element).Name; 34: } 35: } 36: 37: public class ConnectionManagerEndpointElement : ConfigurationElement 38: { 39: [ConfigurationProperty("name", IsRequired = true)] 40: public string Name 41: { 42: get { return (string)this["name"]; } 43: set { this["name"] = value; } 44: } 45: 46: [ConfigurationProperty("address", IsRequired = true)] 47: public string Address 48: { 49: get { return (string)this["address"]; } 50: set { this["address"] = value; } 51: } 52: 53: [ConfigurationProperty("useSSL", IsRequired = false, DefaultValue = false)] 54: public bool UseSSL 55: { 56: get { return (bool)this["useSSL"]; } 57: set { this["useSSL"] = value; } 58: } 59: 60: [ConfigurationProperty("securityGroupsAllowedToSaveChanges", IsRequired = false)] 61: public string SecurityGroupsAllowedToSaveChanges 62: { 63: get { return (string)this["securityGroupsAllowedToSaveChanges"]; } 64: set { this["securityGroupsAllowedToSaveChanges"] = value; } 65: } 66: } 67: } So here the first class we declare is the one that appears in the <configSections> element of the app.config. It is ConnectionManagerDataSection and it inherits from the necessary System.Configuration.ConfigurationSection class. This class just has one property (other than the expected section name), that basically just says I have a Collection property, which is actually a ConnectionManagerEndpointsCollection, which is the next class defined. The ConnectionManagerEndpointsCollection class inherits from ConfigurationElementCollection and overrides the requied fields. The first tells it what type of Element to create when adding a new one (in our case a ConnectionManagerEndpointElement), and a function specifying what property on our ConnectionManagerEndpointElement class is the unique key, which I’ve specified to be the Name field. The last class defined is the actual meat of our elements. It inherits from ConfigurationElement and specifies the properties of the element (which can then be set in the xml of the App.config). The “ConfigurationProperty” attribute on each of the properties tells what we expect the name of the property to correspond to in each element in the app.config, as well as some additional information such as if that property is required and what it’s default value should be. Finally, the code to actually access these values would look like this: 1: // Grab the Environments listed in the App.config and add them to our list. 2: var connectionManagerDataSection = ConfigurationManager.GetSection(ConnectionManagerDataSection.SectionName) as ConnectionManagerDataSection; 3: if (connectionManagerDataSection != null) 4: { 5: foreach (ConnectionManagerEndpointElement endpointElement in connectionManagerDataSection.ConnectionManagerEndpoints) 6: { 7: var endpoint = new ConnectionManagerEndpoint() { Name = endpointElement.Name, ServerInfo = new ConnectionManagerServerInfo() { Address = endpointElement.Address, UseSSL = endpointElement.UseSSL, SecurityGroupsAllowedToSaveChanges = endpointElement.SecurityGroupsAllowedToSaveChanges.Split(',').Where(e => !string.IsNullOrWhiteSpace(e)).ToList() } }; 8: AddEndpoint(endpoint); 9: } 10: } This looks very similar to what we had before in the “simple” example. The main points of interest are that we cast the section as ConnectionManagerDataSection (which is the class we defined for our section) and then iterate over the endpoints collection using the ConnectionManagerEndpoints property we created in the ConnectionManagerDataSection class. Also, some other helpful resources around using app.config that I found (and for parts that I didn’t really explain in this article) are: How do you use sections in C# 4.0 app.config? (Stack Overflow) <== Shows how to use Section Groups as well, which is something that I did not cover here, but might be of interest to you. How to: Create Custom Configuration Sections Using Configuration Section (MSDN) ConfigurationSection Class (MSDN) ConfigurationCollectionAttribute Class (MSDN) ConfigurationElementCollection Class (MSDN) I hope you find this helpful. Feel free to leave a comment. Happy Coding!

Read the article

Metro: Dynamically Switching Templates with a WinJS ListView

- by Stephen.Walther

Imagine that you want to display a list of products using the WinJS ListView control. Imagine, furthermore, that you want to use different templates to display different products. In particular, when a product is on sale, you want to display the product using a special “On Sale” template. In this blog entry, I explain how you can switch templates dynamically when displaying items with a ListView control. In other words, you learn how to use more than one template when displaying items with a ListView control. Creating the Data Source Let’s start by creating the data source for the ListView. Nothing special here – our data source is a list of products. Two of the products, Oranges and Apples, are on sale. (function () { "use strict"; var products = new WinJS.Binding.List([ { name: "Milk", price: 2.44 }, { name: "Oranges", price: 1.99, onSale: true }, { name: "Wine", price: 8.55 }, { name: "Apples", price: 2.44, onSale: true }, { name: "Steak", price: 1.99 }, { name: "Eggs", price: 2.44 }, { name: "Mushrooms", price: 1.99 }, { name: "Yogurt", price: 2.44 }, { name: "Soup", price: 1.99 }, { name: "Cereal", price: 2.44 }, { name: "Pepsi", price: 1.99 } ]); WinJS.Namespace.define("ListViewDemos", { products: products }); })(); The file above is saved with the name products.js and referenced by the default.html page described below. Declaring the Templates and ListView Control Next, we need to declare the ListView control and the two Template controls which we will use to display template items. The markup below appears in the default.html file:  <div id="productItemTemplate" data-win-control="WinJS.Binding.Template"> <div class="product"> <span data-win-bind="innerText:name"></span> <span data-win-bind="innerText:price"></span> </div> </div> <div id="productOnSaleTemplate" data-win-control="WinJS.Binding.Template"> <div class="product onSale"> <span data-win-bind="innerText:name"></span> <span data-win-bind="innerText:price"></span> (On Sale!) </div> </div>  <div id="productsListView" data-win-control="WinJS.UI.ListView" data-win-options="{ itemDataSource: ListViewDemos.products.dataSource, layout: { type: WinJS.UI.ListLayout } }"> </div> In the markup above, two Template controls are declared. The first template is used when rendering a normal product and the second template is used when rendering a product which is on sale. The second template, unlike the first template, includes the text “(On Sale!)”. The ListView control is bound to the data source which we created in the previous section. The ListView itemDataSource property is set to the value ListViewDemos.products.dataSource. Notice that we do not set the ListView itemTemplate property. We set this property in the default.js file. Switching Between Templates All of the magic happens in the default.js file. The default.js file contains the JavaScript code used to switch templates dynamically. Here’s the entire contents of the default.js file: (function () { "use strict"; var app = WinJS.Application; app.onactivated = function (eventObject) { if (eventObject.detail.kind === Windows.ApplicationModel.Activation.ActivationKind.launch) { WinJS.UI.processAll().then(function () { var productsListView = document.getElementById("productsListView"); productsListView.winControl.itemTemplate = itemTemplateFunction; });; } }; function itemTemplateFunction(itemPromise) { return itemPromise.then(function (item) { // Select either normal product template or on sale template var itemTemplate = document.getElementById("productItemTemplate"); if (item.data.onSale) { itemTemplate = document.getElementById("productOnSaleTemplate"); }; // Render selected template to DIV container var container = document.createElement("div"); itemTemplate.winControl.render(item.data, container); return container; }); } app.start(); })(); In the code above, a function is assigned to the ListView itemTemplate property with the following line of code: productsListView.winControl.itemTemplate = itemTemplateFunction; The itemTemplateFunction returns a DOM element which is used for the template item. Depending on the value of the product onSale property, the DOM element is generated from either the productItemTemplate or the productOnSaleTemplate template. Using Binding Converters instead of Multiple Templates In the previous sections, I explained how you can use different templates to render normal products and on sale products. There is an alternative approach to displaying different markup for normal products and on sale products. Instead of creating two templates, you can create a single template which contains separate DIV elements for a normal product and an on sale product. The following default.html file contains a single item template and a ListView control bound to the template.  <div id="productItemTemplate" data-win-control="WinJS.Binding.Template"> <div class="product" data-win-bind="style.display: onSale ListViewDemos.displayNormalProduct"> <span data-win-bind="innerText:name"></span> <span data-win-bind="innerText:price"></span> </div> <div class="product onSale" data-win-bind="style.display: onSale ListViewDemos.displayOnSaleProduct"> <span data-win-bind="innerText:name"></span> <span data-win-bind="innerText:price"></span> (On Sale!) </div> </div>  <div id="productsListView" data-win-control="WinJS.UI.ListView" data-win-options="{ itemDataSource: ListViewDemos.products.dataSource, itemTemplate: select('#productItemTemplate'), layout: { type: WinJS.UI.ListLayout } }"> </div> The first DIV element is used to render a normal product: <div class="product" data-win-bind="style.display: onSale ListViewDemos.displayNormalProduct"> <span data-win-bind="innerText:name"></span> <span data-win-bind="innerText:price"></span> </div> The second DIV element is used to render an “on sale” product: <div class="product onSale" data-win-bind="style.display: onSale ListViewDemos.displayOnSaleProduct"> <span data-win-bind="innerText:name"></span> <span data-win-bind="innerText:price"></span> (On Sale!) </div> Notice that both templates include a data-win-bind attribute. These data-win-bind attributes are used to show the “normal” template when a product is not on sale and show the “on sale” template when a product is on sale. These attributes set the Cascading Style Sheet display attribute to either “none” or “block”. The data-win-bind attributes take advantage of binding converters. The binding converters are defined in the default.js file: (function () { "use strict"; var app = WinJS.Application; app.onactivated = function (eventObject) { if (eventObject.detail.kind === Windows.ApplicationModel.Activation.ActivationKind.launch) { WinJS.UI.processAll(); } }; WinJS.Namespace.define("ListViewDemos", { displayNormalProduct: WinJS.Binding.converter(function (onSale) { return onSale ? "none" : "block"; }), displayOnSaleProduct: WinJS.Binding.converter(function (onSale) { return onSale ? "block" : "none"; }) }); app.start(); })(); The ListViewDemos.displayNormalProduct binding converter converts the value true or false to the value “none” or “block”. The ListViewDemos.displayOnSaleProduct binding converter does the opposite; it converts the value true or false to the value “block” or “none” (Sadly, you cannot simply place a NOT operator before the onSale property in the binding expression – you need to create both converters). The end result is that you can display different markup depending on the value of the product onSale property. Either the contents of the first or second DIV element are displayed: Summary In this blog entry, I’ve explored two approaches to displaying different markup in a ListView depending on the value of a data item property. The bulk of this blog entry was devoted to explaining how you can assign a function to the ListView itemTemplate property which returns different templates. We created both a productItemTemplate and productOnSaleTemplate and displayed both templates with the same ListView control. We also discussed how you can create a single template and display different markup by using binding converters. The binding converters are used to set a DIV element’s display property to either “none” or “block”. We created a binding converter which displays normal products and a binding converter which displays “on sale” products.

Read the article

CodePlex Daily Summary for Wednesday, October 09, 2013

CodePlex Daily Summary for Wednesday, October 09, 2013Popular ReleasesxFunc: xFunc 2.7.3: Fixed memory leak. Small fixes.SmartStore.NET - Free ASP.NET MVC Ecommerce Shopping Cart Solution: SmartStore.NET 1.2.0: HighlightsMulti-store support "Trusted Shops" plugins Highly improved SmartStore.biz Importer plugin Add custom HTML content to pages Performance optimization New FeaturesMulti-store-support: now multiple stores can be managed within a single application instance (e.g. for building different catalogs, brands, landing pages etc.) Added 3 new Trusted Shops plugins: Seal, Buyer Protection, Store Reviews Added Display as HTML Widget to CMS Topics (store owner now can add arbitrary HT...Wrangle for Windows: Wrangle Beta 0.1.0.6: + Various Bugs Fixes + Notification are now available + Many small features added - Does not contain user profiles yet - Conclusions not available yetAD ACL Scanner: 1.3: New features:Effective rights, select a security principal and match it agains the permissions in AD. Color coded permissions based on criticality when using effective rights scan. Search levels : Base, One Level, Subtree. List you domains and select one from the list. Get the size of the security descriptor (bytes). Rerporting on disabled inheritance . Better search functianlity; you can use wildcards on Trustee. Get all inherited permissions in report.MoreTerra (Terraria World Viewer): MoreTerra 1.11.2: Release 1.11.2 Full 1.2 Support =========== =Bug Fixes= =========== We have all markers solsund made sure the tile and background colors are correct. (map looks correct with no missing pink) Added better error tracking for those having trouble.Fast YouTube Downloader: Youtube Downloader 2.1: Youtube Downloader 2.1MSCRM ToolKit: MSCRMToolKit 0.5.5: Increased MaxStringContextLength property in the Reference Data Transporter in response of the Issue: https://mscrmtoolkit.codeplex.com/workitem/1520NuGet: NuGet 2.7.1: Released October 07, 2013. Release notes: http://docs.nuget.org/docs/release-notes/nuget-2.7.1 Important note: After downloading the signed build of NuGet.exe, if you perform an update using the "nuget.exe update -self" command, it will revert back to the unsigned build.Mugen MVVM Toolkit: Mugen MVVM Toolkit 2.0: IntroductionMugen MVVM Toolkit makes it easier to develop Silverlight, WPF, WinRT and WP applications using the Model-View-ViewModel design pattern. The purpose of the toolkit is to provide a simple framework and set of tools for getting up to speed quickly with applications based on the MVVM design pattern. The core of Toolkit contains a navigation system, windows management system, models, validation, etc. Mugen MVVM Toolkit contains all the MVVM classes such as ViewModelBase, RelayCommand,...Office Ribbon Project (under active development): Ribbon (07. Oct. 2013): Fixed Scrollbar Bug if DropDown Button is bigger than screen Added Office 2013 Theme Fixed closing the Ribbon caused a null reference exception in the RibbonButton.Dispose if the DropDown was not created yet Fixed Memory leak fix (unhooked events after Dispose) Fixed ToolStrip Selected Text 2013 and 2007 for Blue and Standard themesGhostscript.NET: Ghostscript.NET v.1.1.0.: v.1.1.0. added GhostscriptViewer state handling (SaveState, RestoreState) GhostscriptRasterizer constructor is extended in order to support usage of the existing GhostscriptViewer instance. fixed problem while using a 32-bit assembly with 32-bit version of Ghostscript on 64-bit Windows: It couldn't find a registry key of installed Ghostscript. Reported and fixed by "r0land". v.1.0.9. implemented EPS (Encapsulated PostScript) support for the GhostscriptViewer. added GhostscriptRasterize...Ghostscript Studio: Ghostscript.Studio v.1.0.2: Ghostscript Studio is easy to use Ghostscript IDE, a tool that facilitates the use of the Ghostscript interpreter by providing you with a graphical interface for postscript editing and file conversions. Ghostscript Studio allows you to preview postscript files, edit the code and execute them in order to convert PDF documents and other formats. The program allows you to convert between PDF, Postscript, EPS, TIFF, JPG and PNG by using the Ghostscript.NET Processor. v.1.0.2. added custom -c s...cmdradio: v0.1.1 binary: Default download in win32. For other OS see here. This is alpha version. Please report all bugs.Squiggle - A free open source LAN Messenger: Squiggle 3.3 Alpha: Allow using environment variables in configuration file (history db connection string, download folder location, display name, group and message) Fix for history viewer to show the correct history entries History saved with UTC timestamp This is alpha release and not recommended for use in productionMedia Companion: Media Companion MC3.579b: Fixed IMDB actor scraping for Movies and TV. Note: there are a couple of new functions that are not active, as this release needed to be done due to IMDB change. New* TV - context menu for rescrapeing Poster image/Banner image Fixed* Both - Fixed actor scraping from IMDB * Movie - Fixed Tableview if Movie's movieset was not in MC's list of moviesets * Movie - Rename with mediainfo now lowercase. * Both - added ignore "A " in titles. Separate option in General Preferences. * Tv - Changing ...VidCoder: 1.5.7 Beta: Updated HandBrake core to SVN 4819. About dialog now pulls down HandBrake version from the DLL. Added a confirmation dialog to Stop if the encode has been going on for more than 5 minutes. Fixed handling of unicode characters for input and output filenames. We now encode to UTF-8 before passing to HandBrake. Fixed a crash in the queue multiple titles dialog. Added code to rescue tool windows which get placed outside of the visible screen area.Wsus Package Publisher: Release v1.3.1310.05: Enhance the "Reboot Remote Computers", by adding a timer before the reboot occure. So that remote users can save their documents and close applications. You can also add a message to be display. In 'Tools'->'Settings'-> Misc Tab, you can set a default message. Enhance the "Compare Computers against AD", by choosing OUs to include in the comparison.Pulse: Pulse 0.6.7.3: Pulse is now accepting donations. To donate by Bitcoin or PayPal see https://pulse.codeplex.com/wikipage?title=Donations Lots of updates in v0.6.7.3: (Feature) New option allows you to disable wallpaper changing when a full screen application is running. This way Pulse doesn't slow down/lag your videos and games :) (Fix) Some users were getting Wallbase errors when logging in. This has been fixed. (Feature) Right click a provider and you can now make a copy of it by selecting the "Dupl...VG-Ripper & PG-Ripper: PG-Ripper 1.4.19: NEW: Added Option to login as Guest NEW: Added Menu Option to delete an Forum Account NEW: Added Support for "ImageTeam.org links FIXED: Fixed Ripping of http://forum.babeunion.com ForumsSimpleExcelReportMaker: Serm 0.03: SourceCode and Sample .Net Framework 3.5 AnyCPU compile.New ProjectsA library of helpers to augment InfoPath code behind development.: A library providing useful helpers to augment and speed up deveopment of complex InfoPath forms requiring code behind.A Simple Online Document Management System Using Asp.net MVC 3: A system to manage documents on-line.ASP.NET Testing: ASP.NET testingAutoSPUpdater: Automated Updating for SharePoint Server 2010/2013Currency Calculator for Microsoft Dynamics AX: The Currency calculator is a tool for calculating amounts between currencies which uses the rates as setup in the Exchange rates of Microsoft Dynamics AX.Daystate Configuration Manager: To be filled later.Djikstra's Algorithm SGGW: It's university student project presenting Djikstra algorithm usage in finding the shortest path between two points in single graph.eCommMongo: eCommMongoFast YouTube Downloader: Fast Youtube Downloader downloads video from YouTube. You could choose different video formats and qualities, and download multiple videos at the same time.FirebirdWars: Firebird Wars online strategy game.FlowSimulation: ???????????? ????????????? ???????????? ?????????Guild Wars 2 VALORUS Command and Control System: The VALORUS Command and Control System is a tool to help track and manage large numbers of people on Guild Wars 2. Useful for WvW and Guild Missions.IntelliCommand: Visual Studio Extension. Helps to remember shortcut keys. This extension is supported for Visual Studio 2010/2012/2013... Professional and higher.myonlyle: gaoOnline War Game: aOracle Portal to SharePoint Migration Scripts: These scripts will assit you in moving from Oracle Portal 10g to SharePoint!OrderingPlatform: OrderingPlatform ?? ??PSEncrypt: Powershell cmdlets to do common encryption\decryption stuffReorderListBox: ReorderListBox is an enhancement to the standard ListBox control for Windows Phone apps that allows users to drag-and-drop list items to reorder the list.SampleTileAnimation: The Windows store application targets to create a Image to appear as a tile and Animate it using StoryBoard feature using C# /Xaml code. SharePoint Friends: Open source SharePoint app library projectSharing memory between user and kernel mode processes- WinCE 6/WEC7/2013: This is a sample driver that explain how to share a block of memory between Kernel mode driver and user mode application in Windows CE 6.0/ WEC7 and WEC2013.SharpHadoop: SharpHadoop facilitates access to WebHDFS from .Net. The library can easily be dependencies and solely relies on the .net standard library Features: 1) UploaSSRS Admin Tasks: Admin GUI Tool for SQL Server Reporting ServicesTimeWatcher: TimeWatcher is an application allowing you keep track of the time passed on tasks, even across multiple working sessions. A good tool for developers who need toTinyMIS: TinyMistmask: tmaskVitaliyPianykhStuff: Here I'll publish handy code snippets.World Simulator: Will the universe expand or will it collapse? Hundreds of experts are about to discuss this question and this program was designed to give an answer... :-)WSccTravel: This is the project created during class WScc 2013

Read the article

Constant game speed independent of variable FPS in OpenGL with GLUT?

- by Nazgulled

I've been reading Koen Witters detailed article about different game loop solutions but I'm having some problems implementing the last one with GLUT, which is the recommended one. After reading a couple of articles, tutorials and code from other people on how to achieve a constant game speed, I think that what I currently have implemented (I'll post the code below) is what Koen Witters called Game Speed dependent on Variable FPS, the second on his article. First, through my searching experience, there's a couple of people that probably have the knowledge to help out on this but don't know what GLUT is and I'm going to try and explain (feel free to correct me) the relevant functions for my problem of this OpenGL toolkit. Skip this section if you know what GLUT is and how to play with it. GLUT Toolkit: GLUT is an OpenGL toolkit and helps with common tasks in OpenGL. The glutDisplayFunc(renderScene) takes a pointer to a renderScene() function callback, which will be responsible for rendering everything. The renderScene() function will only be called once after the callback registration. The glutTimerFunc(TIMER_MILLISECONDS, processAnimationTimer, 0) takes the number of milliseconds to pass before calling the callback processAnimationTimer(). The last argument is just a value to pass to the timer callback. The processAnimationTimer() will not be called each TIMER_MILLISECONDS but just once. The glutPostRedisplay() function requests GLUT to render a new frame so we need call this every time we change something in the scene. The glutIdleFunc(renderScene) could be used to register a callback to renderScene() (this does not make glutDisplayFunc() irrelevant) but this function should be avoided because the idle callback is continuously called when events are not being received, increasing the CPU load. The glutGet(GLUT_ELAPSED_TIME) function returns the number of milliseconds since glutInit was called (or first call to glutGet(GLUT_ELAPSED_TIME)). That's the timer we have with GLUT. I know there are better alternatives for high resolution timers, but let's keep with this one for now. I think this is enough information on how GLUT renders frames so people that didn't know about it could also pitch in this question to try and help if they fell like it. Current Implementation: Now, I'm not sure I have correctly implemented the second solution proposed by Koen, Game Speed dependent on Variable FPS. The relevant code for that goes like this: #define TICKS_PER_SECOND 30 #define MOVEMENT_SPEED 2.0f const int TIMER_MILLISECONDS = 1000 / TICKS_PER_SECOND; int previousTime; int currentTime; int elapsedTime; void renderScene(void) { (...) // Setup the camera position and looking point SceneCamera.LookAt(); // Do all drawing below... (...) } void processAnimationTimer(int value) { // setups the timer to be called again glutTimerFunc(TIMER_MILLISECONDS, processAnimationTimer, 0); // Get the time when the previous frame was rendered previousTime = currentTime; // Get the current time (in milliseconds) and calculate the elapsed time currentTime = glutGet(GLUT_ELAPSED_TIME); elapsedTime = currentTime - previousTime; /* Multiply the camera direction vector by constant speed then by the elapsed time (in seconds) and then move the camera */ SceneCamera.Move(cameraDirection * MOVEMENT_SPEED * (elapsedTime / 1000.0f)); // Requests to render a new frame (this will call my renderScene() once) glutPostRedisplay(); } void main(int argc, char **argv) { glutInit(&argc, argv); (...) glutDisplayFunc(renderScene); (...) // Setup the timer to be called one first time glutTimerFunc(TIMER_MILLISECONDS, processAnimationTimer, 0); // Read the current time since glutInit was called currentTime = glutGet(GLUT_ELAPSED_TIME); glutMainLoop(); } This implementation doesn't fell right. It works in the sense that helps the game speed to be constant dependent on the FPS. So that moving from point A to point B takes the same time no matter the high/low framerate. However, I believe I'm limiting the game framerate with this approach. Each frame will only be rendered when the time callback is called, that means the framerate will be roughly around TICKS_PER_SECOND frames per second. This doesn't feel right, you shouldn't limit your powerful hardware, it's wrong. It's my understanding though, that I still need to calculate the elapsedTime. Just because I'm telling GLUT to call the timer callback every TIMER_MILLISECONDS, it doesn't mean it will always do that on time. I'm not sure how can I fix this and to be completely honest, I have no idea what is the game loop in GLUT, you know, the while( game_is_running ) loop in Koen's article. But it's my understanding that GLUT is event-driven and that game loop starts when I call glutMainLoop() (which never returns), yes? I thought I could register an idle callback with glutIdleFunc() and use that as replacement of glutTimerFunc(), only rendering when necessary (instead of all the time as usual) but when I tested this with an empty callback (like void gameLoop() {}) and it was basically doing nothing, only a black screen, the CPU spiked to 25% and remained there until I killed the game and it went back to normal. So I don't think that's the path to follow. Using glutTimerFunc() is definitely not a good approach to perform all movements/animations based on that, as I'm limiting my game to a constant FPS, not cool. Or maybe I'm using it wrong and my implementation is not right? How exactly can I have a constant game speed with variable FPS? More exactly, how do I correctly implement Koen's Constant Game Speed with Maximum FPS solution (the fourth one on his article) with GLUT? Maybe this is not possible at all with GLUT? If not, what are my alternatives? What is the best approach to this problem (constant game speed) with GLUT? I originally posted this question on Stack Overflow before being pointed out about this site. The following is a different approach I tried after creating the question in SO, so I'm posting it here too. Another Approach: I've been experimenting and here's what I was able to achieve now. Instead of calculating the elapsed time on a timed function (which limits my game's framerate) I'm now doing it in renderScene(). Whenever changes to the scene happen I call glutPostRedisplay() (ie: camera moving, some object animation, etc...) which will make a call to renderScene(). I can use the elapsed time in this function to move my camera for instance. My code has now turned into this: int previousTime; int currentTime; int elapsedTime; void renderScene(void) { (...) // Setup the camera position and looking point SceneCamera.LookAt(); // Do all drawing below... (...) } void renderScene(void) { (...) // Get the time when the previous frame was rendered previousTime = currentTime; // Get the current time (in milliseconds) and calculate the elapsed time currentTime = glutGet(GLUT_ELAPSED_TIME); elapsedTime = currentTime - previousTime; /* Multiply the camera direction vector by constant speed then by the elapsed time (in seconds) and then move the camera */ SceneCamera.Move(cameraDirection * MOVEMENT_SPEED * (elapsedTime / 1000.0f)); // Setup the camera position and looking point SceneCamera.LookAt(); // All drawing code goes inside this function drawCompleteScene(); glutSwapBuffers(); /* Redraw the frame ONLY if the user is moving the camera (similar code will be needed to redraw the frame for other events) */ if(!IsTupleEmpty(cameraDirection)) { glutPostRedisplay(); } } void main(int argc, char **argv) { glutInit(&argc, argv); (...) glutDisplayFunc(renderScene); (...) currentTime = glutGet(GLUT_ELAPSED_TIME); glutMainLoop(); } Conclusion, it's working, or so it seems. If I don't move the camera, the CPU usage is low, nothing is being rendered (for testing purposes I only have a grid extending for 4000.0f, while zFar is set to 1000.0f). When I start moving the camera the scene starts redrawing itself. If I keep pressing the move keys, the CPU usage will increase; this is normal behavior. It drops back when I stop moving. Unless I'm missing something, it seems like a good approach for now. I did find this interesting article on iDevGames and this implementation is probably affected by the problem described on that article. What's your thoughts on that? Please note that I'm just doing this for fun, I have no intentions of creating some game to distribute or something like that, not in the near future at least. If I did, I would probably go with something else besides GLUT. But since I'm using GLUT, and other than the problem described on iDevGames, do you think this latest implementation is sufficient for GLUT? The only real issue I can think of right now is that I'll need to keep calling glutPostRedisplay() every time the scene changes something and keep calling it until there's nothing new to redraw. A little complexity added to the code for a better cause, I think. What do you think?

Read the article

Organising levels / rooms in a MUD-style text based world

- by Polynomial

I'm thinking of writing a small text-based adventure game, but I'm not particularly sure how I should design the world from a technical standpoint. My first thought is to do it in XML, designed something like the following. Apologies for the huge pile of XML, but I felt it important to fully explain what I'm doing. <level> <start>  <room>Kitchen</room> <inventory></inventory> </start> <rooms> <room> <name>Kitchen</name> <description>A small kitchen that looks like it hasn't been used in a while. It has a table in the middle, and there are some cupboards. There is a door to the north, which leads to the garden.</description>  <objects> <object>Cupboards</object> <object>Knife</object> <object>Batteries</object> </objects> </room> <room> <name>Garden</name> <description>The garden is wild and full of prickly bushes. To the north there is a path, which leads into the trees. To the south there is a house.</description> <objects> </objects> </room> <room> <name>Woods</name> <description>The woods are quite dark, with little light bleeding in from the garden. It is eerily quiet.</description> <objects> <object>Trees01</object> </objects> </room> </rooms> <doors>  <door> <type>door</type> <direction>N</direction> <from>Kitchen</from> <to>Garden</to> </door> <door> <type>path</type> <direction>N</direction> <from>Garden</type> <to>Woods</type> </door> </doors> <variables>  <variable name="cupboard_open">0</variable> </variables> <objects>  <object> <name>Trees01</name> <displayName>Trees</displayName> <actions>  <action> <command>EXAMINE</command> <message>The trees are tall and thick. There aren't any low branches, so it'd be difficult to climb them.</message> </action> </actions> </object> <object> <name>Cupboards</name> <displayName>Cupboards</displayName> <actions> <action>  <requirements>  <require operation="equal" value="1">cupboard_open</require> </requirements> <command>EXAMINE</command>  <failMessage>The cupboard is closed.</failMessage> <message>The cupboard contains some batteires.</message> </action> <action> <requirements> <require operation="equal" value="0">cupboard_open</require> </requirements> <command>OPEN</command> <failMessage>The cupboard is already open.</failMessage> <message>You open the cupboard. It contains some batteries.</message>  <assigns> <assign operation="set" value="1">cupboard_open</assign> </assigns> </action> <action> <requirements> <require operation="equal" value="1">cupboard_open</require> </requirements> <command>CLOSE</command> <failMessage>The cupboard is already closed.</failMessage> <message>You closed the cupboard./message> <assigns> <assign operation="set" value="0">cupboard_open</assign> </assigns> </action> </actions> </object> <object> <name>Batteries</name> <displayName>Batteries</displayName>  <inventory>1</inventory> <actions> <action> <requirements> <require operation="equal" value="1">cupboard_open</require> </requirements> <command>GET</command>  <message>You picked up the batteries.</message> </action> </actions> </object> </objects> </level> Obviously there'd need to be more to it than this. Interaction with people and enemies as well as death and completion are necessary additions. Since the XML is quite difficult to work with, I'd probably create some sort of world editor. I'd like to know if this method has any downfalls, and if there's a "better" or more standard way of doing it.

Read the article

Highlighting rows and columns in an HTML table using JQuery

- by nikolaosk

A friend of mine was seeking some help regarding HTML tables and JQuery. I have decided to write a few posts demonstrating the various techniques I used with JQuery to achieve the desired functionality. ?here are other posts in my blog regarding JQuery.You can find them all here.I have received some comments from visitors of this blog that are "complaining" about the length of the blog posts. I will not write lengthy posts anymore...I mean I will try not to do so..We will demonstrate this with a step by step example. I will use Visual Studio 2012 Ultimate. You can also use Visual Studio 2012 Express Edition. You can also use VS 2010 editions. 1) Launch Visual Studio. Create an ASP.Net Empty Web application. Choose an appropriate name for your application.2) Add a web form, default.aspx page to the application.3) Add a table from the HTML controls tab control (from the Toolbox) on the default.aspx page4) Now we need to download the JQuery library. Please visit the http://jquery.com/ and download the minified version.5) We will add a stylesheet to the application (Style.css)5) Obviously at some point we need to reference the JQuery library and the external stylesheet. In the head section ? add the following lines. <link href="Style.css" rel="stylesheet" type="text/css" /> <script src="jquery-1_8_2_min.js" type="text/javascript"></script> 6) Now we need to highlight the rows when the user hovers over them.7) First we need to type the HTML markup<body> <form id="form1" runat="server"> <div> <h1>Liverpool Legends</h1> <table style="width: 50%;" border="1" cellpadding="10" cellspacing ="10"> <thead> <tr><th>Defenders</th><th>MidFielders</th><th>Strikers</th></tr> </thead> <tbody> <tr> <td>Alan Hansen</td> <td>Graeme Souness</td> <td>Ian Rush</td> </tr> <tr> <td>Alan Kennedy</td> <td>Steven Gerrard</td> <td>Michael Owen</td> </tr> <tr> <td>Jamie Garragher</td> <td>Kenny Dalglish</td> <td>Robbie Fowler</td> </tr> <tr> <td>Rob Jones</td> <td>Xabi Alonso</td> <td>Dirk Kuyt</td> </tr> </tbody> </table> </div> </form></body>8) Now we need to write the simple rules in the style.css file.body{background-color:#eaeaea;}.hover { background-color:#42709b; color:#ff6a00;} 8) Inside the head section we also write the simple JQuery code. <script type="text/javascript"> $(document).ready(function() { $('tr').hover( function() { $(this).find('td').addClass('hover'); }, function() { $(this).find('td').removeClass('hover'); } ); }); </script>9) Run your application and see the row changing background color and text color every time the user hovers over it. Let me explain how this functionality is achieved.We have the .hover style rule in the style.css file that contains some properties that define the background color value and the color value when the mouse will be hovered on the row.In the JQuery code we do attach the hover() event to the tr elements.The function that is called when the hovering takes place, we search for the td element and through the addClass function we apply the styles defined in the .hover class rule in the style.css file.I remove the .hover rule styles with the removeClass function. Now let's say that we want to highlight only alternate rows of the table.We need to add another rule in the style.css.alternate { background-color:#42709b; color:#ff6a00;} The JQuery code (comment out the previous JQuery code) follows <script type="text/javascript"> $(document).ready(function() { $('table tr:odd').addClass('alternate'); }); </script> When I run my application through VS I see the following result You can do that with columns as well. You can highlight alternate columns as well.The JQuery code (comment out the previous JQuery code) follows <script type="text/javascript"> $(document).ready(function() { $('td:nth-child(odd)').addClass('alternate'); }); </script> In this script I use the nth-child() method in the JQuery code.This method retrieves all the elements that are nth children of their parent.Have a look at the picture below to see the resultsYou can also change color to each individual cell when hovered on.The JQuery code (comment out the previous JQuery code) follows <script type="text/javascript"> $(document).ready(function() { $('td').hover( function() { $(this).addClass('hover'); }, function() { $(this).removeClass('hover'); } ); }); </script> Have a look at the picture below to see the results. Hope it helps!!!

Read the article

CodePlex Daily Summary for Tuesday, December 11, 2012

CodePlex Daily Summary for Tuesday, December 11, 2012Popular ReleasesDirectX Tool Kit: December 11, 2012: December 11, 2012 Ex versions of DDSTextureLoader and WICTextureLoader Removed use of ATL's CComPtr in favor of WRL's ComPtr for all platforms to support VS Express editions Updated VS 2010 project for official 'property sheet' integration for Windows 8.0 SDK Minor fix to CommonStates for Feature Level 9.1 Tweaked AlphaTestEffect.cpp to work around ARM NEON compiler codegen bug Added dxguid.lib as a default library for Debug builds to resolve GUID link issuesCleverBobCat: CleverBobCat 1.1.3: Fixed: - Cart code now works in vab, wheels retract correctly and no more anchors visible - No more exceptions on VAB Added: - ResourceTransfer beam now has a wide array of configurable options for beam material, size and colors - Added an optional offset to resource transfer, if specificed the "beam" will start from part center + the specified offsetSharpCompress - a fully native C# library for RAR, 7Zip, Zip, Tar, GZip, BZip2: SharpCompress 0.8.2: This release just contains some fixes that have been done since the last release. Plus, this is strong named as well. I apologize for the lack of updates but my free time is less these days.re-linq: 1.13.178.0: This is build 1.13.178.0 of re-linq. Find the complete release notes for the build here: Release NotesMedia Companion: MediaCompanion3.511b release: Two more bug fixes: - General Preferences were not getting restored - Fanart and poster image files were being locked, preventing changes to themVodigi Open Source Interactive Digital Signage: Vodigi Release 5.5: The following enhancements and fixes are included in Vodigi 5.5. Vodigi Administrator - Manage Music Files - Add Music Files to Image Slide Shows - Manage System Messages - Display System Messages to Users During Login - Ported to Visual Studio 2012 and MVC 4 - Added New Vodigi Administrator User Guide Vodigi Player - Improved Login/Schedule Startup Procedure - Startup Using Last Known Schedule when Disconnected on Startup - Improved Check for Schedule Changes - Now Every 15 Minutes - Pla...Secretary Tool: Secretary Tool v1.1.0: I'm still considering this version a beta version because, while it seems to work well for me, I haven't received any feedback and I certainly don't want anyone relying solely on this tool for calculations and such until its correct functioning is verified by someone. This version includes several bug fixes, including a rather major one with Emergency Contact Information not saving. Also, reporting is completed. There may be some tweaking to the reporting engine, but it is good enough to rel...VidCoder: 1.4.10 Beta: Added progress percent to the title bar/task bar icon. Added MPLS information to Blu-ray titles. Fixed the following display issues in Windows 8: Uncentered text in textbox controls Disabled controls not having gray text making them hard to identify as disabled Drop-down menus having hard-to distinguish white on light-blue text Added more logging to proxy disconnect issues and increased timeout on initial call to help prevent timeouts. Fixed encoding window showing the built-in pre...WPF Application Framework (WAF): WPF Application Framework (WAF) 2.5.0.400: Version 2.5.0.400 (Release): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Changelog Legend: [B] Breaking change; [O] Marked member as obsolete Update the documentation. InfoMan: Write the documentation. Other Downloads Downloads OverviewHome Access Plus+: v8.5: v8.5.1211.1240 Fixed: changed to using the thumbnailPhoto attribute instead of jpegPhoto v8.5.1208.1500 This is a point release, for the other parts of HAP+ see the v8.3 release. Fixed: #me#me issue with the Edit Profile Link Updated: 8.5.1208 release Updated: Documentation with hidden booking system feature Added: Room Drop Down to the Booking System (no control panel interface), can be Resource Specific Fixed: Recursive AD Group Membership Lookup Fixed: User.IsInRole with recursive lookup...Http Explorer: httpExplorer-1.1: httpExplorer now has the ability to connect to http server via web proxies. The proxy may be explicitly specified by hostname or IP address. Or it may be specified via the Internet Options settings of Windows. You may also specify credentials to pass to the proxy if the proxy requires them. These credentials may be NTLM or basic authentication (clear text username and password).Bee OPOA Platform: Bee OPOA Demo V1.0.001: Initial version.Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.78: Fix for issue #18924 - using -pretty option left in ///#DEBUG blocks. Fix for issue #18980 - bad += optimization caused bug in resulting code. Optimization has been removed pending further review.Dynamics Crm 2011 Solution Manager: Crm Solution Manager 1.0: First Version.Lava JS: Lava JS 1.0: Sourcemp3player-xslt-plugin: mp3player module 1.0: This is a mp3 player module that you can install on your umbraco project. It can display the list of the media and you can click the button to play or stop.STeaL : stealed functionarities from STL: STeaL 0.4.1(prelerease): + fill / fill-nMi-DevEnv: Development 0.5: Ran a new test scenario where I created a DC, then created a web server, blew it away, then re-created the web server. The purpose of the test was to see how the installers would handle information existing in AD, like the OU for CRM. This revealed yet another silly issue in retrieving details of existing OU's, where I had the syntax wrong. I should read exception details more closely :) Apologies also, I've just now started labelling the solution according to these "snapshots". Sorry for...Yahoo! UI Library: YUI Compressor for .Net: Version 2.2.0.0 - Epee: New : Web Optimization package! Cleaned up the nuget packages BugFix: minifying lots of files will now be faster because of a recent regression in some code. (We were instantiating something far too many times).DtPad - .NET Framework text editor: DtPad 2.9.0.40: http://dtpad.diariotraduttore.com/files/images/flag-eng.png English + A new built-in editor for the management of CSV files, including the edit of cells, deleting and adding new rows, replacement of delimiter character and much more (issue #1137) + The limit of rows allowed before the decommissioning of their side panel has been raised (new default: 1.000) (issue #1155, only partially solved) + Pressing CTRL+TAB now DtPad opens a screen that shows the list of opened tabs (issue #1143) + Note...New ProjectsAmazon S3 Upload with Uploadify: ASP.MVC upload file from client browser direct to Amazon S3Ameoto DEV: Bin for all of our software sources :DAutonomic Computing Library: This framework will simplify the development of Autonomic Computing Systems. BIUUITest: BIUUITestBotvaBot: This project should help tothe Botva.Ru gamers to automize their game proces. It is a set of libraries for simple sending of the HTTP requests with list of the main requests to the botva.ru web-site. Also project contains the clients forsimple using this request umulators.Cartellino: Scopo del progetto è la realizzazione di un software in grado di rilevare i dati dai rilevatori 3Tec (www.3tec.it) e stampare i cartellini presenza dei dipendenticmsforbeginner: in this project explain how to edit, create multiple webpages to a single website with less knowledge on html ,.net languagesContact Us Module: This is an Umbraco based module for feedback. You can upload the contact us module in the dashboard and then display those module anywhere in your site.CrmXpress Security Roles Helper For Microsoft Dynamics CRM 2011: CrmXpress Security Roles Helper is a tool/utility. It lets you compare the Security Roles for their differences at the privilege level with their scopes.DarkSky Helpdesk: DarkSky Helpdesk is an Orchard module that turns your Orchard application into a Helpdesk system.DataEntity: A Framework that help us to make persistences and materializations from any SQLServer DataBase Tables to Entity classes. Better performance with native ADO.NET.Edisfera DNN Training Task Module: This is a training project to familiarize with codeplex and dnn module creation.eyoung events description language: Eyoung is a event driven language. It can be used in many fields, such as intrusion action definition.FastBuild: Fast build VS2010 C++ project with the options OpenCV, QT, Boost and OpenGL.Find Changeset By Comment: This extension is used to find changesets that contain a specific phrase in a comment.Gatepass System: This application under development is my first application on codeplex. It is meant primarily as a learning tool while developing a Gatepass System. This GateHandle Template Library (HTL): Handle Template Library (HTL) is a C++ library for developing Windows applications and services. It provides a set of classes for files, threads, events, and more.iDoklad API: iDoklad API Demo je Open Source projekt spolecnosti Cígler Software. Ukázková aplikace demonstruje napojení na fakturacní službu iDokladIronBefunge: IronBefunge is an interpretor (written in .NET) for Befunge programs.Iterator Tasks: Iterator Tasks is a iterator-based coroutine class library.Javacc-Compile-N14: Javacc - compile - N14 is a students' compiler project and we use javacc to compiler XYZ-2 languageMessenger Game - Starter Kit: Kom godt i gang med at lave spil til Messenger med dette komplette Starter Kit. Indeholder et komplet netværksspil lavet med Messenger Activity API og Silverlight.MOBZcript: MOBZcript is a simple batch file editor for cmd scripts. It saves and runs your scripts as if you started them from a command line.NET.Library: The NET.Library will be available in different versions to run on the .Net 2, 3 and 4 frameworks and consists of various .Net programming utilities. proxificator: Proxificator is component for getting the appropriate proxyRetailManagement: abcStudentManage: testWebQQ Interface: A library that enable programmers to access QQ much easier via codeZytonic Screenshot: Upload Images From your Computer Harddrive or Screen With Ease!

Read the article

Using Native Drag and Drop in HTML 5 pages

- by nikolaosk

This is going to be the eighth post in a series of posts regarding HTML 5. You can find the other posts here, here , here , here, here , here and here. In this post I will show you how to implement Drag and Drop functionality in an HTML 5 page using JQuery.This is a great functionality and we do not need to resort anymore to plugins like Silverlight and Flash to achieve this great feature. This is also called a native approach on Drag and Drop.I will use some events and I will write code to respond when these events are fired.As I said earlier we need to write Javascript to implement the drag and drop functionality. I will use the very popular JQuery Library. Please download the library (minified version) from http://jquery.com/downloadI will create a simple HTML page.There will be two thumbnails pics on it. There will also be the drag and drop area where the user will drag the thumb pics into it and they will resize to their actual size. The HTML markup for the page follows<!doctype html><html lang="en"><head><title>Liverpool Legends Gallery</title><meta charset="utf-8"><link rel="stylesheet" type="text/css" href="style.css"><script type="text/javascript" charset="utf-8" src="jquery-1.8.1.min.js"></script> <script language="JavaScript" src="drag.js"></script> </head><body><header><h1>A page dedicated to Liverpool Legends</h1><h2>Drag and Drop the thumb image in the designated area to see the full image</h2></header><div id="main"><img src="thumbs/steven-gerrard.jpg" big="large-images/steven-gerrard-large.jpg" alt="John Barnes"><img src="thumbs/robbie-fowler.jpg" big="large-images/robbie-fowler-large.jpg" alt="Ian Rush"><div id="drag"><p>Drop your image here</p> </div></body></html> There is nothing difficult or fancy in the HTML markup above. I have a link to the external JQuery library and another javascript file that I will implement the whole drag and drop functionality.The code for the css file (style.css) follows#main{ float: left; width: 340px; margin-right: 30px;}#drag{ float: left; width: 400px; height:300px; background-color: #c0c0c0;}These are simple CSS rules. This post cannot be a tutorial on CSS.For all these posts I assume that you have the basic HTML,CSS,Javascript skills.Now I am going to create a javascript file (drag.js) to implement the drag and drop functionality.I will provide the whole code for the drag.js file and then I will explain what I am doing in each step.$(function() { var players = $('#main img'); players.attr('draggable', 'true'); players.bind('dragstart', function(event) { var data = event.originalEvent.dataTransfer; var src = $(this).attr("big"); data.setData("Text", src); return true; }); var target = $('#drag'); target.bind('drop', function(event) { var data = event.originalEvent.dataTransfer; var src = ( data.getData('Text') ); var img = $("<img></img>").attr("src", src); $(this).html(img); if (event.preventDefault) event.preventDefault(); return(false); }); target.bind('dragover', function(event) { if (event.preventDefault) event.preventDefault(); return false; }); players.bind('dragend', function(event) { if (event.preventDefault) event.preventDefault(); return false; }); }); In these lines var players = $('#main img'); players.attr('draggable', 'true');We grab all the images in the #main div and store them in a variable and then make them draggable.Then in following lines I am using the dragstart event. players.bind('dragstart', function(event) { var data = event.originalEvent.dataTransfer; var src = $(this).attr("big"); data.setData("Text", src); return true; }); In this event I am associating the custom data attribute value with the item I am dragging.Then I create a variable to get hold of the dropping area var target = $('#drag'); Then in the following lines I implement the drop event and what happens when the user drops the image in the designated area on the page. target.bind('drop', function(event) { var data = event.originalEvent.dataTransfer; var src = ( data.getData('Text') ); var img = $("<img></img>").attr("src", src); $(this).html(img); if (event.preventDefault) event.preventDefault(); return(false); }); The dragend event is fired when the user has finished the drag operation players.bind('dragend', function(event) { if (event.preventDefault) event.preventDefault(); return false; }); When this method event.preventDefault() is called , the default action of the event will not be triggered.Please have a look a the picture below to see how the page looks before the drag and drop takes place. Then simply I drag and drop a picture in the dropping area.Have a look at the picture below It works!!! Hope it helps!!

Read the article

Why unhandled exceptions are useful

- by Simon Cooper

It’s the bane of most programmers’ lives – an unhandled exception causes your application or webapp to crash, an ugly dialog gets displayed to the user, and they come complaining to you. Then, somehow, you need to figure out what went wrong. Hopefully, you’ve got a log file, or some other way of reporting unhandled exceptions (obligatory employer plug: SmartAssembly reports an application’s unhandled exceptions straight to you, along with the entire state of the stack and variables at that point). If not, you have to try and replicate it yourself, or do some psychic debugging to try and figure out what’s wrong. However, it’s good that the program crashed. Or, more precisely, it is correct behaviour. An unhandled exception in your application means that, somewhere in your code, there is an assumption that you made that is actually invalid. Coding assumptions Let me explain a bit more. Every method, every line of code you write, depends on implicit assumptions that you have made. Take this following simple method, that copies a collection to an array and includes an item if it isn’t in the collection already, using a supplied IEqualityComparer: public static T[] ToArrayWithItem( ICollection<T> coll, T obj, IEqualityComparer<T> comparer) { // check if the object is in collection already // using the supplied comparer foreach (var item in coll) { if (comparer.Equals(item, obj)) { // it's in the collection already // simply copy the collection to an array // and return it T[] array = new T[coll.Count]; coll.CopyTo(array, 0); return array; } } // not in the collection // copy coll to an array, and add obj to it // then return it T[] array = new T[coll.Count+1]; coll.CopyTo(array, 0); array[array.Length-1] = obj; return array; } What’s all the assumptions made by this fairly simple bit of code? coll is never null comparer is never null coll.CopyTo(array, 0) will copy all the items in the collection into the array, in the order defined for the collection, starting at the first item in the array. The enumerator for coll returns all the items in the collection, in the order defined for the collection comparer.Equals returns true if the items are equal (for whatever definition of ‘equal’ the comparer uses), false otherwise comparer.Equals, coll.CopyTo, and the coll enumerator will never throw an exception or hang for any possible input and any possible values of T coll will have less than 4 billion items in it (this is a built-in limit of the CLR) array won’t be more than 2GB, both on 32 and 64-bit systems, for any possible values of T (again, a limit of the CLR) There are no threads that will modify coll while this method is running and, more esoterically: The C# compiler will compile this code to IL according to the C# specification The CLR and JIT compiler will produce machine code to execute the IL on the user’s computer The computer will execute the machine code correctly That’s a lot of assumptions. Now, it could be that all these assumptions are valid for the situations this method is called. But if this does crash out with an exception, or crash later on, then that shows one of the assumptions has been invalidated somehow. An unhandled exception shows that your code is running in a situation which you did not anticipate, and there is something about how your code runs that you do not understand. Debugging the problem is the process of learning more about the new situation and how your code interacts with it. When you understand the problem, the solution is (usually) obvious. The solution may be a one-line fix, the rewrite of a method or class, or a large-scale refactoring of the codebase, but whatever it is, the fix for the crash will incorporate the new information you’ve gained about your own code, along with the modified assumptions. When code is running with an assumption or invariant it depended on broken, then the result is ‘undefined behaviour’. Anything can happen, up to and including formatting the entire disk or making the user’s computer sentient and start doing a good impression of Skynet. You might think that those can’t happen, but at Halting problem levels of generality, as soon as an assumption the code depended on is broken, the program can do anything. That is why it’s important to fail-fast and stop the program as soon as an invariant is broken, to minimise the damage that is done. What does this mean in practice? To start with, document and check your assumptions. As with most things, there is a level of judgement required. How you check and document your assumptions depends on how the code is used (that’s some more assumptions you’ve made), how likely it is a method will be passed invalid arguments or called in an invalid state, how likely it is the assumptions will be broken, how expensive it is to check the assumptions, and how bad things are likely to get if the assumptions are broken. Now, some assumptions you can assume unless proven otherwise. You can safely assume the C# compiler, CLR, and computer all run the method correctly, unless you have evidence of a compiler, CLR or processor bug. You can also assume that interface implementations work the way you expect them to; implementing an interface is more than simply declaring methods with certain signatures in your type. The behaviour of those methods, and how they work, is part of the interface contract as well. For example, for members of a public API, it is very important to document your assumptions and check your state before running the bulk of the method, throwing ArgumentException, ArgumentNullException, InvalidOperationException, or another exception type as appropriate if the input or state is wrong. For internal and private methods, it is less important. If a private method expects collection items in a certain order, then you don’t necessarily need to explicitly check it in code, but you can add comments or documentation specifying what state you expect the collection to be in at a certain point. That way, anyone debugging your code can immediately see what’s wrong if this does ever become an issue. You can also use DEBUG preprocessor blocks and Debug.Assert to document and check your assumptions without incurring a performance hit in release builds. On my coding soapbox… A few pet peeves of mine around assumptions. Firstly, catch-all try blocks: try { ... } catch { } A catch-all hides exceptions generated by broken assumptions, and lets the program carry on in an unknown state. Later, an exception is likely to be generated due to further broken assumptions due to the unknown state, causing difficulties when debugging as the catch-all has hidden the original problem. It’s much better to let the program crash straight away, so you know where the problem is. You should only use a catch-all if you are sure that any exception generated in the try block is safe to ignore. That’s a pretty big ask! Secondly, using as when you should be casting. Doing this: (obj as IFoo).Method(); or this: IFoo foo = obj as IFoo; ... foo.Method(); when you should be doing this: ((IFoo)obj).Method(); or this: IFoo foo = (IFoo)obj; ... foo.Method(); There’s an assumption here that obj will always implement IFoo. If it doesn’t, then by using as instead of a cast you’ve turned an obvious InvalidCastException at the point of the cast that will probably tell you what type obj actually is, into a non-obvious NullReferenceException at some later point that gives you no information at all. If you believe obj is always an IFoo, then say so in code! Let it fail-fast if not, then it’s far easier to figure out what’s wrong. Thirdly, document your assumptions. If an algorithm depends on a non-trivial relationship between several objects or variables, then say so. A single-line comment will do. Don’t leave it up to whoever’s debugging your code after you to figure it out. Conclusion It’s better to crash out and fail-fast when an assumption is broken. If it doesn’t, then there’s likely to be further crashes along the way that hide the original problem. Or, even worse, your program will be running in an undefined state, where anything can happen. Unhandled exceptions aren’t good per-se, but they give you some very useful information about your code that you didn’t know before. And that can only be a good thing.

Read the article

Azure – Part 5 – Repository Pattern for Table Service

- by Shaun

In my last post I created a very simple WCF service with the user registration functionality. I created an entity for the user data and a DataContext class which provides some methods for operating the entities such as add, delete, etc. And in the service method I utilized it to add a new entity into the table service. But I didn’t have any validation before registering which is not acceptable in a real project. So in this post I would firstly add some validation before perform the data creation code and show how to use the LINQ for the table service. LINQ to Table Service Since the table service utilizes ADO.NET Data Service to expose the data and the managed library of ADO.NET Data Service supports LINQ we can use it to deal with the data of the table service. Let me explain with my current example: I would like to ensure that when register a new user the email address should be unique. So I need to check the account entities in the table service before add. If you remembered, in my last post I mentioned that there’s a method in the TableServiceContext class – CreateQuery, which will create a IQueryable instance from a given type of entity. So here I would create a method under my AccountDataContext class to return the IQueryable<Account> which named Load. 1: public class AccountDataContext : TableServiceContext 2: { 3: private CloudStorageAccount _storageAccount; 4: 5: public AccountDataContext(CloudStorageAccount storageAccount) 6: : base(storageAccount.TableEndpoint.AbsoluteUri, storageAccount.Credentials) 7: { 8: _storageAccount = storageAccount; 9: 10: var tableStorage = new CloudTableClient(_storageAccount.TableEndpoint.AbsoluteUri, 11: _storageAccount.Credentials); 12: tableStorage.CreateTableIfNotExist("Account"); 13: } 14: 15: public void Add(Account accountToAdd) 16: { 17: AddObject("Account", accountToAdd); 18: SaveChanges(); 19: } 20: 21: public IQueryable<Account> Load() 22: { 23: return CreateQuery<Account>("Account"); 24: } 25: } The method returns the IQueryable<Account> so that I can perform the LINQ operation on it. And back to my service class, I will use it to implement my validation. 1: public bool Register(string email, string password) 2: { 3: var storageAccount = CloudStorageAccount.FromConfigurationSetting("DataConnectionString"); 4: var accountToAdd = new Account(email, password) { DateCreated = DateTime.Now }; 5: var accountContext = new AccountDataContext(storageAccount); 6: 7: // validation 8: var accountNumber = accountContext.Load() 9: .Where(a => a.Email == accountToAdd.Email) 10: .Count(); 11: if (accountNumber > 0) 12: { 13: throw new ApplicationException(string.Format("Your account {0} had been used.", accountToAdd.Email)); 14: } 15: 16: // create entity 17: try 18: { 19: accountContext.Add(accountToAdd); 20: return true; 21: } 22: catch (Exception ex) 23: { 24: Trace.TraceInformation(ex.ToString()); 25: } 26: return false; 27: } I used the Load method to retrieve the IQueryable<Account> and use Where method to find the accounts those email address are the same as the one is being registered. If it has I through an exception back to the client side. Let’s run it and test from my simple client application. Oops! Looks like we encountered an unexpected exception. It said the “Count” is not support by the ADO.NET Data Service LINQ managed library. That is because the table storage managed library (aka. TableServiceContext) is based on the ADO.NET Data Service and it supports very limit LINQ operation. Although I didn’t find a full list or documentation about which LINQ methods it supports I could even refer a page on msdn here. It gives us a roughly summary of which query operation the ADO.NET Data Service managed library supports and which doesn't. As you see the Count method is not in the supported list. Not only the query operation, there inner lambda expression in the Where method are limited when using the ADO.NET Data Service managed library as well. For example if you added (a => !a.DateDeleted.HasValue) in the Where method to exclude those deleted account it will raised an exception said "Invalid Input". Based on my experience you should always use the simple comparison (such as ==, >, <=, etc.) on the simple members (such as string, integer, etc.) and do not use any shortcut methods (such as string.Compare, string.IsNullOrEmpty etc.). 1: // validation 2: var accountNumber = accountContext.Load() 3: .Where(a => a.Email == accountToAdd.Email) 4: .ToList() 5: .Count; 6: if (accountNumber > 0) 7: { 8: throw new ApplicationException(string.Format("Your account {0} had been used.", accountToAdd.Email)); 9: } We changed the a bit and try again. Since I had created an account with my mail address so this time it gave me an exception said that the email had been used, which is correct. Repository Pattern for Table Service The AccountDataContext takes the responsibility to save and load the account entity but only for that specific entity. Is that possible to have a dynamic or generic DataContext class which can operate any kinds of entity in my system? Of course yes. Although there's no typical database in table service we can threat the entities as the records, similar with the data entities if we used OR Mapping. As we can use some patterns for ORM architecture here we should be able to adopt the one of them - Repository Pattern in this example. We know that the base class - TableServiceContext provide 4 methods for operating the table entities which are CreateQuery, AddObject, UpdateObject and DeleteObject. And we can create a relationship between the enmity class, the table container name and entity set name. So it's really simple to have a generic base class for any kinds of entities. Let's rename the AccountDataContext to DynamicDataContext and make the type of Account as a type parameter if it. 1: public class DynamicDataContext<T> : TableServiceContext where T : TableServiceEntity 2: { 3: private CloudStorageAccount _storageAccount; 4: private string _entitySetName; 5: 6: public DynamicDataContext(CloudStorageAccount storageAccount) 7: : base(storageAccount.TableEndpoint.AbsoluteUri, storageAccount.Credentials) 8: { 9: _storageAccount = storageAccount; 10: _entitySetName = typeof(T).Name; 11: 12: var tableStorage = new CloudTableClient(_storageAccount.TableEndpoint.AbsoluteUri, 13: _storageAccount.Credentials); 14: tableStorage.CreateTableIfNotExist(_entitySetName); 15: } 16: 17: public void Add(T entityToAdd) 18: { 19: AddObject(_entitySetName, entityToAdd); 20: SaveChanges(); 21: } 22: 23: public void Update(T entityToUpdate) 24: { 25: UpdateObject(entityToUpdate); 26: SaveChanges(); 27: } 28: 29: public void Delete(T entityToDelete) 30: { 31: DeleteObject(entityToDelete); 32: SaveChanges(); 33: } 34: 35: public IQueryable<T> Load() 36: { 37: return CreateQuery<T>(_entitySetName); 38: } 39: } I saved the name of the entity type when constructed for performance matter. The table name, entity set name would be the same as the name of the entity class. The Load method returned a generic IQueryable instance which supports the lazy load feature. Then in my service class I changed the AccountDataContext to DynamicDataContext and that's all. 1: var accountContext = new DynamicDataContext<Account>(storageAccount); Run it again and register another account. The DynamicDataContext now can be used for any entities. For example, I would like the account has a list of notes which contains 3 custom properties: Account Email, Title and Content. We create the note entity class. 1: public class Note : TableServiceEntity 2: { 3: public string AccountEmail { get; set; } 4: public string Title { get; set; } 5: public string Content { get; set; } 6: public DateTime DateCreated { get; set; } 7: public DateTime? DateDeleted { get; set; } 8: 9: public Note() 10: : base() 11: { 12: } 13: 14: public Note(string email) 15: : base(email, string.Format("{0}_{1}", email, Guid.NewGuid().ToString())) 16: { 17: AccountEmail = email; 18: } 19: } And no need to tweak the DynamicDataContext we can directly go to the service class to implement the logic. Notice here I utilized two DynamicDataContext instances with the different type parameters: Note and Account. 1: public class NoteService : INoteService 2: { 3: public void Create(string email, string title, string content) 4: { 5: var storageAccount = CloudStorageAccount.FromConfigurationSetting("DataConnectionString"); 6: var accountContext = new DynamicDataContext<Account>(storageAccount); 7: var noteContext = new DynamicDataContext<Note>(storageAccount); 8: 9: // validate - email must be existed 10: var accounts = accountContext.Load() 11: .Where(a => a.Email == email) 12: .ToList() 13: .Count; 14: if (accounts <= 0) 15: throw new ApplicationException(string.Format("The account {0} does not exsit in the system please register and try again.", email)); 16: 17: // save the note 18: var noteToAdd = new Note(email) { Title = title, Content = content, DateCreated = DateTime.Now }; 19: noteContext.Add(noteToAdd); 20: } 21: } And updated our client application to test the service. I didn't implement any list service to show all notes but we can have a look on the local SQL database if we ran it at local development fabric. Summary In this post I explained a bit about the limited LINQ support for the table service. And then I demonstrated about how to use the repository pattern in the table service data access layer and make the DataContext dynamically. The DynamicDataContext I created in this post is just a prototype. In fact we should create the relevant interface to make it testable and for better structure we'd better separate the DataContext classes for each individual kind of entity. So it should have IDataContextBase<T>, DataContextBase<T> and for each entity we would have class AccountDataContext<Account> : IDataContextBase<Account>, DataContextBase<Account> { … } class NoteDataContext<Note> : IDataContextBase<Note>, DataContextBase<Note> { … } Besides the structured data saving and loading, another common scenario would be saving and loading some binary data such as images, files. In my next post I will show how to use the Blob Service to store the bindery data - make the account be able to upload their logo in my example. Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

Read the article

Code Behaviour via Unit Tests

- by Dewald Galjaard

Normal 0 false false false EN-ZA X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Some four months ago my car started acting up. Symptoms included a sputtering as my car’s computer switched between gears intermittently. Imagine building up speed, then when you reach 80km/h the car magically and mysteriously decide to switch back to third or even second gear. Clearly it was confused! I managed to track down a technician, an expert in his field to help me out. As he fitted his handheld computer to some hidden port under the dash, he started to explain “These cars are quite intelligent, you know. When they sense something is wrong they run in a restrictive program which probably account for how you managed to drive here in the first place...” I was surprised and thought this was certainly going to be an interesting test drive. The car ran smoothly down the first couple of stretches as the technician ran through routine checks. Then he said “Ok, all looking good. We need to start testing aspects of the gearbox. Inside the gearbox there are a couple of sensors. One of them is a speed sensor which talks to the computer, which in turn will decide which gear to switch to. The restrictive program avoid these sensors altogether and allow the computer to obtain its input from other [non-affected] sources”. Then, as soon as he forced the speed sensor to come back online the symptoms and ill behaviour re-emerged... What an incredible analogy for getting into a discussion on unit testing software? Besides I should probably put my ill fortune to some good use, right? This example provide a lot of insight into how and why we should conduct unit tests when writing code. More importantly, it captures what is easily and unfortunately often the most overlooked goal of writing unit tests by those new to the art and those who oppose it alike - The goal of writing unit tests is to test the behaviour of our code under predefined conditions. Although it is very possible to test the intrinsic workings of each and every component in your code, writing several tests for each method in practise will soon prove to be an exhausting and ultimately fruitless exercise given the certain and ever changing nature of business requirements. Consequently it is true and quite possible whilst conducting proper unit tests, to call any single method several times as you examine and contemplate different scenarios. Let’s write some code to demonstrate what I mean. In my example I make use of the Moq framework and NUnit to create my tests. Truly you can use whatever you’re comfortable with. First we’ll create an ISpeedSensor interface. This is to represent the speed sensor located in the gearbox. Then we’ll create a Gearbox class which we’ll pass to a constructor when we instantiate an object of type Computer. All three are described below. ISpeedSensor.cs namespace AutomaticVehicle { public interface ISpeedSensor { int ReportCurrentSpeed(); } } Gearbox.cs namespace AutomaticVehicle { public class Gearbox { private ISpeedSensor _speedSensor; public Gearbox( ISpeedSensor gearboxSpeedSensor ) { _speedSensor = gearboxSpeedSensor; } /// <summary> /// This method obtain it's reading from the speed sensor. /// </summary> /// <returns></returns> public int ReportCurrentSpeed() { return _speedSensor.ReportCurrentSpeed(); } } } Computer.cs namespace AutomaticVehicle { public class Computer { private Gearbox _gearbox; public Computer( Gearbox gearbox ) { } public int GetCurrentSpeed() { return _gearbox.ReportCurrentSpeed( ); } } } Since this post is about Unit testing, that is exactly what we’ll create next. Create a second project in your solution. I called mine AutomaticVehicleTests and I immediately referenced the respective nunit, moq and AutomaticVehicle dll’s. We’re going to write a test to examine what happens inside the Computer class. ComputerTests.cs namespace AutomaticVehicleTests { [TestFixture] public class ComputerTests { [Test] public void Computer_Gearbox_SpeedSensor_DoesThrow() { // Mock ISpeedSensor in gearbox Mock< ISpeedSensor > speedSensor = new Mock< ISpeedSensor >( ); speedSensor.Setup( n => n.ReportCurrentSpeed() ).Throws<Exception>(); Gearbox gearbox = new Gearbox( speedSensor.Object ); // Create Computer instance to test it's behaviour towards an exception in gearbox Computer carComputer = new Computer( gearbox ); // For simplicity let’s assume for now the car only travels at 60 km/h. Assert.AreEqual( 60, carComputer.GetCurrentSpeed( ) ); } } } What is happening in this test? We have created a mocked object using the ISpeedsensor interface which we've passed to our Gearbox object. Notice that I created the mocked object using an interface, not the implementation. I’ll talk more about this in future posts but in short I do this to accentuate the fact that I'm not not really concerned with how SpeedSensor work internally at this particular point in time. Next I’ve gone ahead and created a scenario where I’ve declared the speed sensor in Gearbox to be faulty by forcing it to throw an exception should we ask Gearbox to report on its current speed. Sneaky, sneaky. This test is a simulation of how things may behave in the real world. Inevitability things break, whether it’s caused by mechanical failure, some logical error on your part or a fellow developer which didn’t consult the documentation (or the lack thereof ) - whether you’re calling a speed sensor, making a call to a database, calling a web service or just trying to write a file to disk. It’s a scenario I’ve created and this test is about how the code within the Computer instance will behave towards any such error as I’ve depicted. Now, if you’ve followed closely in my final assert method you would have noticed I did something quite unexpected. I might be getting ahead of myself now but I’m testing to see if the value returned is equal to what I expect it to be under perfect conditions – I’m not testing to see if an error has been thrown! Why is that? Well, in short this is TDD. Test Driven Development is about first writing your test to define the result we want, then to go back and change the implementation within your class to obtain the desired output (I need to make sure I can drive back to the repair shop. Remember? ) So let’s go ahead and run our test as is. It’s fails miserably... Good! Let’s go back to our Computer class and make a small change to the GetCurrentSpeed method. Computer.cs public int GetCurrentSpeed() { try { return _gearbox.ReportCurrentSpeed( ); } catch { RunRestrictiveProgram( ); } } This is a simple solution, I know, but it does provide a way to allow for different behaviour. You’re more than welcome to provide an implementation for RunRestrictiveProgram should you feel the need to. It's not within the scope of this post or related to the point I'm trying to make. What is important is to notice how the focus has shifted in our approach from how things can break - to how things behave when broken. Happy coding!

Read the article

Software development is (mostly) a trade, and what to do about it

- by Jeff

(This is another cross-post from my personal blog. I don’t even remember when I first started to write it, but I feel like my opinion is well enough baked to share.) I've been sitting on this for a long time, particularly as my opinion has changed dramatically over the last few years. That I've encountered more crappy code than maintainable, quality code in my career as a software developer only reinforces what I'm about to say. Software development is just a trade for most, and not a huge academic endeavor. For those of you with computer science degrees readying your pitchforks and collecting your algorithm interview questions, let me explain. This is not an assault on your way of life, and if you've been around, you know I'm right about the quality problem. You also know the HR problem is very real, or we wouldn't be paying top dollar for mediocre developers and importing people from all over the world to fill the jobs we can't fill. I'm going to try and outline what I see as some of the problems, and hopefully offer my views on how to address them. The recruiting problem I think a lot of companies are doing it wrong. Over the years, I've had two kinds of interview experiences. The first, and right, kind of experience involves talking about real life achievements, followed by some variation on white boarding in pseudo-code, drafting some basic system architecture, or even sitting down at a comprooder and pecking out some basic code to tackle a real problem. I can honestly say that I've had a job offer for every interview like this, save for one, because the task was to debug something and they didn't like me asking where to look ("everyone else in the company died in a plane crash"). The other interview experience, the wrong one, involves the classic torture test designed to make the candidate feel stupid and do things they never have, and never will do in their job. First they will question you about obscure academic material you've never seen, or don't care to remember. Then they'll ask you to white board some ridiculous algorithm involving prime numbers or some kind of string manipulation no one would ever do. In fact, if you had to do something like this, you'd Google for a solution instead of waste time on a solved problem. Some will tell you that the academic gauntlet interview is useful to see how people respond to pressure, how they engage in complex logic, etc. That might be true, unless of course you have someone who brushed up on the solutions to the silly puzzles, and they're playing you. But here's the real reason why the second experience is wrong: You're evaluating for things that aren't the job. These might have been useful tactics when you had to hire people to write machine language or C++, but in a world dominated by managed code in C#, or Java, people aren't managing memory or trying to be smarter than the compilers. They're using well known design patterns and techniques to deliver software. More to the point, these puzzle gauntlets don't evaluate things that really matter. They don't get into code design, issues of loose coupling and testability, knowledge of the basics around HTTP, or anything else that relates to building supportable and maintainable software. The first situation, involving real life problems, gives you an immediate idea of how the candidate will work out. One of my favorite experiences as an interviewee was with a guy who literally brought his work from that day and asked me how to deal with his problem. I had to demonstrate how I would design a class, make sure the unit testing coverage was solid, etc. I worked at that company for two years. So stop looking for algorithm puzzle crunchers, because a guy who can crush a Fibonacci sequence might also be a guy who writes a class with 5,000 lines of untestable code. Fashion your interview process on ways to reveal a developer who can write supportable and maintainable code. I would even go so far as to let them use the Google. If they want to cut-and-paste code, pass on them, but if they're looking for context or straight class references, hire them, because they're going to be life-long learners. The contractor problem I doubt anyone has ever worked in a place where contractors weren't used. The use of contractors seems like an obvious way to control costs. You can hire someone for just as long as you need them and then let them go. You can even give them the work that no one else wants to do. In practice, most places I've worked have retained and budgeted for the contractor year-round, meaning that the $90+ per hour they're paying (of which half goes to the person) would have been better spent on a full-time person with a $100k salary and benefits. But it's not even the cost that is an issue. It's the quality of work delivered. The accountability of a contractor is totally transient. They only need to deliver for as long as you keep them around, and chances are they'll never again touch the code. There's no incentive for them to get things right, there's little incentive to understand your system or learn anything. At the risk of making an unfair generalization, craftsmanship doesn't matter to most contractors. The education problem I don't know what they teach in college CS courses. I've believed for most of my adult life that a college degree was an essential part of being successful. Of course I would hold that bias, since I did it, and have the paper to show for it in a box somewhere in the basement. My first clue that maybe this wasn't a fully qualified opinion comes from the fact that I double-majored in journalism and radio/TV, not computer science. Eventually I worked with people who skipped college entirely, many of them at Microsoft. Then I worked with people who had a masters degree who sucked at writing code, next to the high school diploma types that rock it every day. I still think there's a lot to be said for the social development of someone who has the on-campus experience, but for software developers, college might not matter. As I mentioned before, most of us are not writing compilers, and we never will. It's actually surprising to find how many people are self-taught in the art of software development, and that should reveal some interesting truths about how we learn. The first truth is that we learn largely out of necessity. There's something that we want to achieve, so we do what I call just-in-time learning to meet those goals. We acquire knowledge when we need it. So what about the gaps in our knowledge? That's where the most valuable education occurs, via our mentors. They're the people we work next to and the people who write blogs. They are critical to our professional development. They don't need to be an encyclopedia of jargon, but they understand the craft. Even at this stage of my career, I probably can't tell you what SOLID stands for, but you can bet that I practice the principles behind that acronym every day. That comes from experience, augmented by my peers. I'm hell bent on passing that experience to others. Process issues If you're a manager type and don't do much in the way of writing code these days (shame on you for not messing around at least), then your job is to isolate your tradespeople from nonsense, while bringing your business into the realm of modern software development. That doesn't mean you slap up a white board with sticky notes and start calling yourself agile, it means getting all of your stakeholders to understand that frequent delivery of quality software is the best way to deal with change and evolving expectations. It also means that you have to play technical overlord to make sure the education and quality issues are dealt with. That's why I make the crack about sticky notes, because without the right technique being practiced among your code monkeys, you're just a guy with sticky notes. You're asking your business to accept frequent and iterative delivery, now make sure that the folks writing the code can handle the same thing. This means unit testing, the right instrumentation, integration tests, automated builds and deployments... all of the stuff that makes it easy to see when change breaks stuff. The prognosis I strongly believe that education is the most important part of what we do. I'm encouraged by things like The Starter League, and it's the kind of thing I'd love to see more of. I would go as far as to say I'd love to start something like this internally at an existing company. Most of all though, I can't emphasize enough how important it is that we mentor each other and share our knowledge. If you have people on your staff who don't want to learn, fire them. Seriously, get rid of them. A few months working with someone really good, who understands the craftsmanship required to build supportable and maintainable code, will change that person forever and increase their value immeasurably.

Read the article

Auto-hydrate your objects with ADO.NET

- by Jake Rutherford

Recently while writing the monotonous code for pulling data out of a DataReader to hydrate some objects in an application I suddenly wondered "is this really necessary?" You've probably asked yourself the same question, and many of you have: - Used a code generator - Used a ORM such as Entity Framework - Wrote the code anyway because you like busy work In most of the cases I've dealt with when making a call to a stored procedure the column names match up with the properties of the object I am hydrating. Sure that isn't always the case, but most of the time it's 1 to 1 mapping. Given that fact I whipped up the following method of hydrating my objects without having write all of the code. First I'll show the code, and then explain what it is doing. /// <summary> /// Abstract base class for all Shared objects. /// </summary> /// <typeparam name="T"></typeparam> [Serializable, DataContract(Name = "{0}SharedBase")] public abstract class SharedBase<T> where T : SharedBase<T> { private static List<PropertyInfo> cachedProperties; /// <summary> /// Hydrates derived class with values from record. /// </summary> /// <param name="dataRecord"></param> /// <param name="instance"></param> public static void Hydrate(IDataRecord dataRecord, T instance) { var instanceType = instance.GetType(); //Caching properties to avoid repeated calls to GetProperties. //Noticable performance gains when processing same types repeatedly. if (cachedProperties == null) { cachedProperties = instanceType.GetProperties().ToList(); } foreach (var property in cachedProperties) { if (!dataRecord.ColumnExists(property.Name)) continue; var ordinal = dataRecord.GetOrdinal(property.Name); var isNullable = property.PropertyType.IsGenericType && property.PropertyType.GetGenericTypeDefinition() == typeof (Nullable<>); var isNull = dataRecord.IsDBNull(ordinal); var propertyType = property.PropertyType; if (isNullable) { if (!string.IsNullOrEmpty(propertyType.FullName)) { var nullableType = Type.GetType(propertyType.FullName); propertyType = nullableType != null ? nullableType.GetGenericArguments()[0] : propertyType; } } switch (Type.GetTypeCode(propertyType)) { case TypeCode.Int32: property.SetValue(instance, (isNullable && isNull) ? (int?) null : dataRecord.GetInt32(ordinal), null); break; case TypeCode.Double: property.SetValue(instance, (isNullable && isNull) ? (double?) null : dataRecord.GetDouble(ordinal), null); break; case TypeCode.Boolean: property.SetValue(instance, (isNullable && isNull) ? (bool?) null : dataRecord.GetBoolean(ordinal), null); break; case TypeCode.String: property.SetValue(instance, (isNullable && isNull) ? null : isNull ? null : dataRecord.GetString(ordinal), null); break; case TypeCode.Int16: property.SetValue(instance, (isNullable && isNull) ? (int?) null : dataRecord.GetInt16(ordinal), null); break; case TypeCode.DateTime: property.SetValue(instance, (isNullable && isNull) ? (DateTime?) null : dataRecord.GetDateTime(ordinal), null); break; } } } } Here is a class which utilizes the above: [Serializable] [DataContract] public class foo : SharedBase<foo> { [DataMember] public int? ID { get; set; } [DataMember] public string Name { get; set; } [DataMember] public string Description { get; set; } [DataMember] public string Subject { get; set; } [DataMember] public string Body { get; set; } public foo(IDataRecord record) { Hydrate(record, this); } public foo() {} } Explanation: - Class foo inherits from SharedBase specifying itself as the type. (NOTE SharedBase is abstract here in the event we want to provide additional methods which could be overridden by the instance class) public class foo : SharedBase<foo> - One of the foo class constructors accepts a data record which then calls the Hydrate method on SharedBase passing in the record and itself. public foo(IDataRecord record) { Hydrate(record, this); } - Hydrate method on SharedBase will use reflection on the object passed in to determine its properties. At the same time, it will effectively cache these properties to avoid repeated expensive reflection calls public static void Hydrate(IDataRecord dataRecord, T instance) { var instanceType = instance.GetType(); //Caching properties to avoid repeated calls to GetProperties. //Noticable performance gains when processing same types repeatedly. if (cachedProperties == null) { cachedProperties = instanceType.GetProperties().ToList(); } . . . - Hydrate method on SharedBase will iterate each property on the object and determine if a column with matching name exists in data record foreach (var property in cachedProperties) { if (!dataRecord.ColumnExists(property.Name)) continue; var ordinal = dataRecord.GetOrdinal(property.Name); . . . NOTE: ColumnExists is an extension method I put on IDataRecord which I’ll include at the end of this post. - Hydrate method will determine if the property is nullable and whether the value in the corresponding column of the data record has a null value var isNullable = property.PropertyType.IsGenericType && property.PropertyType.GetGenericTypeDefinition() == typeof (Nullable<>); var isNull = dataRecord.IsDBNull(ordinal); var propertyType = property.PropertyType; . . . - If Hydrate method determines the property is nullable it will determine the underlying type and set propertyType accordingly - Hydrate method will set the value of the property based upon the propertyType That’s it!!! The magic here is in a few places. First, you may have noticed the following: public abstract class SharedBase<T> where T : SharedBase<T> This says that SharedBase can be created with any type and that for each type it will have it’s own instance. This is important because of the static members within SharedBase. We want this behavior because we are caching the properties for each type. If we did not handle things in this way only 1 type could be cached at a time, or, we’d need to create a collection that allows us to cache the properties for each type = not very elegant. Second, in the constructor for foo you may have noticed this (literally): public foo(IDataRecord record) { Hydrate(record, this); } I wanted the code for auto-hydrating to be as simple as possible. At first I wasn’t quite sure how I could call Hydrate on SharedBase within an instance of the class and pass in the instance itself. Fortunately simply passing in “this” does the trick. I wasn’t sure it would work until I tried it out, and fortunately it did. So, to actually use this feature when utilizing ADO.NET you’d do something like the following: public List<foo> GetFoo(int? fooId) { List<foo> fooList; const string uspName = "usp_GetFoo"; using (var conn = new SqlConnection(_dbConnection)) using (var cmd = new SqlCommand(uspName, conn)) { cmd.CommandType = CommandType.StoredProcedure; cmd.Parameters.Add(new SqlParameter("@FooID", SqlDbType.Int) {Direction = ParameterDirection.Input, Value = fooId}); conn.Open(); using (var dr = cmd.ExecuteReader()) { fooList= (from row in dr.Cast<DbDataRecord>() select new foo(row) ).ToList(); } } return fooList; } Nice! Instead of having line after line manually assigning values from data record to an object you simply create a new instance and pass in the data record. Note that there are certainly instances where columns returned from stored procedure do not always match up with property names. In this scenario you can still use the above method and simply do your manual assignments afterward.

Read the article

Are XML Comments Necessary Documentation?

- by Bob Horn

I used to be a fan of requiring XML comments for documentation. I've since changed my mind for two main reasons: Like good code, methods should be self-explanatory. In practice, most XML comments are useless noise that provide no additional value. Many times we simply use GhostDoc to generate generic comments, and this is what I mean by useless noise: /// <summary> /// Gets or sets the unit of measure. /// </summary> /// <value> /// The unit of measure. /// </value> public string UnitOfMeasure { get; set; } To me, that's obvious. Having said that, if there were special instructions to include, then we should absolutely use XML comments. I like this excerpt from this article: Sometimes, you will need to write comments. But, it should be the exception not the rule. Comments should only be used when they are expressing something that cannot be expressed in code. If you want to write elegant code, strive to eliminate comments and instead write self-documenting code. Am I wrong to think we should only be using XML comments when the code isn't enough to explain itself on its own? I believe this is a good example where XML comments make pretty code look ugly. It takes a class like this... public class RawMaterialLabel : EntityBase { public long Id { get; set; } public string ManufacturerId { get; set; } public string PartNumber { get; set; } public string Quantity { get; set; } public string UnitOfMeasure { get; set; } public string LotNumber { get; set; } public string SublotNumber { get; set; } public int LabelSerialNumber { get; set; } public string PurchaseOrderNumber { get; set; } public string PurchaseOrderLineNumber { get; set; } public DateTime ManufacturingDate { get; set; } public string LastModifiedUser { get; set; } public DateTime LastModifiedTime { get; set; } public Binary VersionNumber { get; set; } public ICollection<LotEquipmentScan> LotEquipmentScans { get; private set; } } ... And turns it into this: /// <summary> /// Container for properties of a raw material label /// </summary> public class RawMaterialLabel : EntityBase { /// <summary> /// Gets or sets the id. /// </summary> /// <value> /// The id. /// </value> public long Id { get; set; } /// <summary> /// Gets or sets the manufacturer id. /// </summary> /// <value> /// The manufacturer id. /// </value> public string ManufacturerId { get; set; } /// <summary> /// Gets or sets the part number. /// </summary> /// <value> /// The part number. /// </value> public string PartNumber { get; set; } /// <summary> /// Gets or sets the quantity. /// </summary> /// <value> /// The quantity. /// </value> public string Quantity { get; set; } /// <summary> /// Gets or sets the unit of measure. /// </summary> /// <value> /// The unit of measure. /// </value> public string UnitOfMeasure { get; set; } /// <summary> /// Gets or sets the lot number. /// </summary> /// <value> /// The lot number. /// </value> public string LotNumber { get; set; } /// <summary> /// Gets or sets the sublot number. /// </summary> /// <value> /// The sublot number. /// </value> public string SublotNumber { get; set; } /// <summary> /// Gets or sets the label serial number. /// </summary> /// <value> /// The label serial number. /// </value> public int LabelSerialNumber { get; set; } /// <summary> /// Gets or sets the purchase order number. /// </summary> /// <value> /// The purchase order number. /// </value> public string PurchaseOrderNumber { get; set; } /// <summary> /// Gets or sets the purchase order line number. /// </summary> /// <value> /// The purchase order line number. /// </value> public string PurchaseOrderLineNumber { get; set; } /// <summary> /// Gets or sets the manufacturing date. /// </summary> /// <value> /// The manufacturing date. /// </value> public DateTime ManufacturingDate { get; set; } /// <summary> /// Gets or sets the last modified user. /// </summary> /// <value> /// The last modified user. /// </value> public string LastModifiedUser { get; set; } /// <summary> /// Gets or sets the last modified time. /// </summary> /// <value> /// The last modified time. /// </value> public DateTime LastModifiedTime { get; set; } /// <summary> /// Gets or sets the version number. /// </summary> /// <value> /// The version number. /// </value> public Binary VersionNumber { get; set; } /// <summary> /// Gets the lot equipment scans. /// </summary> /// <value> /// The lot equipment scans. /// </value> public ICollection<LotEquipmentScan> LotEquipmentScans { get; private set; } }

Read the article

Introducing Oracle Multitenant

- by OracleMultitenant

0 0 1 1142 6510 Oracle Corporation 54 15 7637 14.0 Normal 0 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-fareast-language:JA;} The First Database Designed for the Cloud Today Oracle announced the general availability (GA) of Oracle Database 12c, the first database designed for the Cloud. Oracle Multitenant, new with Oracle Database 12c, is a key component of this – a new architecture for consolidating databases and simplifying operations in the Cloud. With this, the inaugural post in the Multitenant blog, my goal is to start the conversation about Oracle Multitenant. We are very proud of this new architecture, which we view as a major advance for Oracle. Customers, partners and analysts who have had previews are very excited about its capabilities and its flexibility. This high level review of Oracle Multitenant will touch on our design considerations and how we re-architected our database for the cloud. I’ll briefly describe our new multitenant architecture and explain it’s key benefits. Finally I’ll mention some of the major use cases we see for Oracle Multitenant. Industry Trends We always start by talking to our customers about the pressures and challenges they’re facing and what trends they’re seeing in the industry. Some things don’t change. They face the same pressures and the same requirements as ever: Pressure to do more with less; be faster, leaner, cheaper, and deliver services 24/7. Big companies have achieved scale. Now they want to realize economies of scale. As ever, DBAs are faced with the challenges of patching and upgrading large numbers of databases, and provisioning new ones. Requirements are familiar: Performance, scalability, reliability and high availability are non-negotiable. They need ever more security in this threatening climate. There’s no time to stop and retool with new applications. What’s new are the trends. These are the techniques to use to respond to these pressures within the constraints of the requirements. With the advent of cloud computing and availability of massively powerful servers – even engineered systems such as Exadata – our customers want to consolidate many applications into fewer larger servers. There’s a move to standardized services – even self-service. Consolidation Consolidation is not new; companies have tried various different approaches to consolidation of databases in the cloud. One approach is to partition a powerful server between several virtual machines, one per application. A downside of this is that you have the resource and management overheads of OS and RDBMS per VM – that is, per application. Another is that you have replaced physical sprawl with virtual sprawl and virtual sprawl is still expensive to manage. In the dedicated database model, we have a single physical server supporting multiple databases, one per application. So there’s a shared OS overhead, but RDBMS process and memory overhead are replicated per application. Let's think about our traditional Oracle Database architecture. Every time we create a database, be it a production database, a development or a test database, what do we do? We create a set of files, we allocate a bunch of memory for managing the data, and we kick off a series of background processes. This is replicated for every one of the databases that we create. As more and more databases are fired up, these replicated overheads quickly consume the available server resources and this limits the number of applications we can run on any given server. In Oracle Database 11g and earlier the highest degree of consolidation could be achieved by what we call schema consolidation. In this model we have one big server with one big database. Individual applications are installed in separate schemas or table-owners. Database overheads are shared between all applications, which affords maximum consolidation. The shortcomings are that application changes are often required. There is no tenant isolation. One bad apple can spoil the whole batch. New Architecture & Benefits In Oracle Database 12c, we have a new multitenant architecture, featuring pluggable databases. This delivers all the resource utilization advantages of schema consolidation with none of the downsides. There are two parts to the term “pluggable database”: "pluggable", which is new, and "database", which is familiar. Before we get to the exciting new stuff let’s discuss what hasn’t changed. A pluggable database is a fully functional Oracle database. It’s not watered down in any way. From the perspective of an application or an end user it hasn’t changed at all. This is very important because it means that no application changes are required to adopt this new architecture. There are many thousands of applications built on Oracle databases and they are all ready to run on Oracle Multitenant. So we have these self-contained pluggable databases (PDBs), and as their name suggests, they are plugged into a multitenant container database (CDB). The CDB behaves as a single database from the operations point of view. Very much as we had with the schema consolidation model, we only have a single set of Oracle background processes and a single, shared database memory requirement. This gives us very high consolidation density, which affords maximum reduction in capital expenses (CapEx). By performing management operations at the CDB level – “managing many as one” – we can achieve great reductions in operating expenses (OpEx) as well, but we retain granular control where appropriate. Furthermore, the “pluggability” capability gives us portability and this adds a tremendous amount of agility. We can simply unplug a PDB from one CDB and plug it into another CDB, for example to move it from one SLA tier to another. I'll explore all these new capabilities in much more detail in a future posting. Use Cases We can identify a number of use cases for Oracle Multitenant. Here are a few of the major ones. 0 0 1 113 650 Oracle Corporation 5 1 762 14.0 Normal 0 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-fareast-language:JA;} Development / Testing where individual engineers need rapid provisioning and recycling of private copies of a few "master test databases" Consolidation of disparate applications using fewer, more powerful servers Software as a Service deploying separate copies of identical applications to individual tenants Database as a Service typically self-service provisioning of databases on the private cloud Application Distribution from ISV / Installation by Customer Eliminating many typical installation steps (create schema, import seed data, import application code PL/SQL…) - just plug in a PDB! High volume data distribution literally via disk drives in envelopes distributed by truck! - distribution of things like GIS or MDM master databases …various others! Benefits Previous approaches to consolidation have involved a trade-off between reductions in Capital Expenses (CapEx) and Operating Expenses (OpEx), and they’ve usually come at the expense of agility. With Oracle Multitenant you can have your cake and eat it: Minimize CapEx More Applications per server Minimize OpEx Manage many as one Standardized procedures and services Rapid provisioning Maximize Agility Cloning for development and testing Portability through pluggability Scalability with RAC Ease of Adoption Applications run unchanged It’s a pure deployment choice. Neither the database backend nor the application needs to be changed. In future postings I’ll explore various aspects in more detail. However, if you feel compelled to devour everything you can about Oracle Multitenant this very minute, have no fear. Visit the Multitenant page on OTN and explore the various resources we have available there. Among these, Oracle Distinguished Product Manager Bryn Llewellyn has written an excellent, thorough, and exhaustively detailed White Paper about Oracle Multitenant, which is available here. Follow me I tweet @OraclePDB #OracleMultitenant

Read the article

ASP.Net MVC Interview Questions and Answers

- by Samir R. Bhogayta

About ASP.Net MVC The ASP.Net MVC is the framework provided by Microsoft that lets you develop the applications that follows the principles of Model-View-Controller (MVC) design pattern. The .Net programmers new to MVC thinks that it is similar to WebForms Model (Normal ASP.Net), but it is far different from the WebForms programming. This article will tell you how to quick learn the basics of MVC along with some frequently asked interview questions and answers on ASP.Net MVC 1. What is ASP.Net MVC The ASP.Net MVC is the framework provided by Microsoft to achieve separation of concerns that leads to easy maintainability of the application. Model is supposed to handle data related activity View deals with user interface related work Controller is meant for managing the application flow by communicating between Model and View. Normal 0 false false false EN-US X-NONE X-NONE 2. Why to use ASP.Net MVC The strength of MVC (i.e. ASP.Net MVC) listed below will answer this question MVC reduces the dependency between the components; this makes your code more testable. MVC does not recommend use of server controls, hence the processing time required to generate HTML response is drastically reduced. The integration of java script libraries like jQuery, Microsoft MVC becomes easy as compared to Webforms approach. 3. What do you mean by Razor The Razor is the new View engine introduced in MVC 3.0. The View engine is responsible for processing the view files [e.g. .aspx, .cshtml] in order to generate HTML response. The previous versions of MVC were dependent on ASPX view engine. 4. Can we use ASPX view engine in latest versions of MVC Yes. The Recommended way is to prefer Razor View 5. What are the benefits of Razor View? The syntax for server side code is simplified The length of code is drastically reduced Razor syntax is easy to learn and reduces the complexity Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} 6. What is the extension of Razor View file? .cshtml (for c#) and .vbhtml (for vb) 7. How to create a Controller in MVC Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} Create a simple class and extend it from Controller class. The bare minimum requirement for a class to become a controller is to inherit it from ControllerBase is the class that is required to inherit to create the controller but Controller class inherits from ControllerBase. 8. How to create an Action method in MVC Add a simple method inside a controller class with ActionResult return type. 9. How to access a view on the server The browser generates the request in which the information like Controller name, Action Name and Parameters are provided, when server receives this URL it resolves the Name of Controller and Action, after that it calls the specified action with provided parameters. Action normally does some processing and returns the ViewResult by specifying the view name (blank name searches according to naming conventions). 10. What is the default Form method (i.e. GET, POST) for an action method GET. To change this you can add an action level attribute e.g [HttpPost] Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} 11. What is a Filter in MVC? When user (browser) sends a request to server an action method of a controller gets invoked; sometimes you may require executing a custom code before or after action method gets invoked, this custom code is called as Filter. 12. What are the different types of Filters in MVC? a. Authorization filter b. Action filter c. Result filter d. Exception filter [Do not forget the order mentioned above as filters gets executed as per above mentioned sequence] 13. Explain the use of Filter with an example? Suppose you are working on a MVC application where URL is sent in an encrypted format instead of a plain text, once encrypted URL is received by server it will ignore action parameters because of URL encryption. To solve this issue you can create global action filter by overriding OnActionExecuting method of controller class, in this you can extract the action parameters from the encrypted URL and these parameters can be set on filterContext to send plain text parameters to the actions. 14. What is a HTML helper? A HTML helper is a method that returns string; return string usually is the HTML tag. The standard HTML helpers (e.g. Html.BeginForm(),Html.TextBox()) available in MVC are lightweight as it does not rely on event model or view state as that of in ASP.Net server controls.

Read the article

CodePlex Daily Summary for Sunday, November 03, 2013

CodePlex Daily Summary for Sunday, November 03, 2013Popular ReleasesuComponents: uComponents v6.0.0: This release of uComponents will compile against and support the new API in Umbraco v6.1.0. What's new in uComponents v6.0.0? New DataTypesImage Point XML DropDownList XPath Templatable List New features / Resolved issuesThe following workitems have been implemented and/or resolved: 14781 14805 14808 14818 14854 14827 14868 14859 14790 14853 14790 DataType Grid 14788 14810 14873 14833 14864 14855 / 14860 14816 14823 Drag & Drop support for rows Su...SmartStore.NET - Free ASP.NET MVC Ecommerce Shopping Cart Solution: SmartStore.NET 1.2.1: New FeaturesAdded option Limit to current basket subtotal to HadSpentAmount discount rule Items in product lists can be labelled as NEW for a configurable period of time Product templates can optionally display a discount sign when discounts were applied Added the ability to set multiple favicons depending on stores and/or themes Plugin management: multiple plugins can now be (un)installed in one go Added a field for the HTML body id to store entity (Developer) New property 'Extra...WPF Extended DataGrid: WPF Extended DataGrid 2.0.0.9 binaries: Fixed issue with ICollectionView containg null values (AutoFilter issue)Community TFS Build Extensions: October 2013: The October 2013 release contains Scripts - a new addition to our delivery. These are a growing library of PowerShell scripts to use with VS2013. See our documentation for more on scripting. VS2010 Activities(target .NET 4.0) VS2012 Activities (target .NET 4.5) VS2013 Activities (target .NET 4.5.1) Community TFS Build Manager VS2012 Community TFS Build Manager VS2013 The Community TFS Build Managers for VS2010, 2012 and 2013 can also be found in the Visual Studio Gallery where upda...WMI Inventory Client: WMI Inventory Client: WMI Inventory Client ?????????????? ?????????????? ?? WMISuperSocket, an extensible socket server framework: SuperSocket 1.6 stable: Changes included in this release: Process level isolation SuperSocket ServerManager (include server and client) Connect to client from server side initiatively Client certificate validation New configuration attributes "textEncoding", "defaultCulture", and "storeLocation" (certificate node) Many bug fixes http://docs.supersocket.net/v1-6/en-US/New-Features-and-Breaking-ChangesFile System Explorer: Beta 1: Try me and please give feedback via Discussions and issues Installation: Download the zip file Unblock it Unzip to a suitable location Just run Filesystemexplorer.exe Enjoy Updates: V1.1 Beta: Fixed some low level file search issuesBarbaTunnel: BarbaTunnel 8.1: Check Version History for more information about this release.Mugen MVVM Toolkit: Mugen MVVM Toolkit 2.1: v 2.1 Added the 'Should' class instead of the 'Validate' class. The 'Validate' class is now obsolete. Added 'Toolkit.Annotations' to support the Mugen MVVM Toolkit ReSharper plugin. Updated JetBrains annotations within the project. Added the 'GlobalSettings.DefaultActivationPolicy' property to represent the default activation policy. Removed the 'GetSettings' method from the 'ViewModelBase' class. Instead of it, the 'GlobalSettings.DefaultViewModelSettings' property is used. Updated...SharePoint User Permission Check: SP User Permission Check: Modified Current.Web.Title in output label.TFS Event Workflows: TFS Event Workflows 0.10.41576.0 - TFS 2012-2013: Supports TFS 2012 and TFS 2013 For a TFS 2010 version look at https://tfseventworkflows.codeplex.com/releases/view/102444 New Features multiple application tiers storage of workflows, configurations and activities in the version control support for async execution in TFS job agent selection of collection/project filters in config file simple disable in config file simplified configurationCrowd CMS: Crowd CMS FREE - Official Release: This is the original source files for Crowd CMS Free (v1.0.0) and is the latest stable release which has been bug-tested and fixed.Sea Dragon AJAX Viewer Web Part: Sea Dragon Ajax Web Part: The Seadragon Viewer WSP and companion literature. There are three seperate guides that explain how to get up and running: - Seadragon Viewer Web Part Installation Guide Creating Deep Zoom Images for Seadragon Viewer Bringing it all together These guides are currently very basic and are offered as guides for getting full usage out Seadragon. Please post any suggestions for further documentation in the discussions forumProject Nonnon: 2013_10_30: ----------==========----------==========----------==========---------- "No news is good news." ----------==========----------==========----------==========---------- Change Log 2013/10/30 BUGFIX win32/explorer.c n_explorer_path_get() : comment OLD : typo NEW : fixed Felis Win8 or latert : Link Maker OLD : not function in some cases NEW : fixed Nyaurism Formatter : byte count label : when resized OLD : text will be broken NEW : fixed NEW_FEATURE win...NAudio: NAudio 1.7: full release notes available at http://mark-dot-net.blogspot.co.uk/2013/10/naudio-17-release-notes.htmlFormula Calculation Toolkit: FCT Library: Alfa release for Formula Calculation Toolkit.WebExtras: v1.3.0 Beta: Enh: Adding support for Bootstrap 3.x Enh: Adding support for Gumby 2.5.x Enh: Adding a new string extension Remove() to remove occurences of given string Enh: Adding a ToDictionary() for name value collections Enh: The dataTable sort extension is now a little more intelligent and robust Enh: General under the hood code enhancements Fix: Hyperlink extensions now handle MVC Areas Fix: Marking JsFunc as serializable otherwise when using the ASP.NET State Server, the object does no...DirectX Tool Kit: October 2013: October 28, 2013 Updated for Visual Studio 2013 and Windows 8.1 SDK RTM Added DGSLEffect, DGSLEffectFactory, VertexPositionNormalTangentColorTexture, and VertexPositionNormalTangentColorTextureSkinning Model loading and effect factories support loading skinned models MakeSpriteFont now has a smooth vs. sharp antialiasing option: /sharp Model loading from CMOs now handles UV transforms for texture coordinates A number of small fixes for EffectFactory Minor code and project cleanup ...ExtJS based ASP.NET Controls: FineUI v4.0beta1: +2013-10-28 v4.0 beta1 +?????Collapsed???????????????。 -????：window/group_panel.aspx??，???????，???????，?????????。 +??????SelectedNodeIDArray???????????????。 -????：tree/checkbox/tree_checkall.aspx??，?????，?????，????????????。 -??TimerPicker???????（????、????ing）。 -??????????????????????（???）。 -?????????????，??type=text/css（??~`）。 -MsgTarget???MessageTarget，???None。 -FormOffsetRight?????20px??5px。 -?Web.config?PageManager??FormLabelAlign???。 -ToolbarPosition??Left/Right。 -??Web.conf...CODE Framework: 4.0.31028.0: See change notes in the documentation section for details on what's new. Note: If you download the class reference help file with, you have to right-click the file, pick "Properties", and then unblock the file, as many browsers flag the file as blocked during download (for security reasons) and thus hides all content.New Projects.NET Site Storage: Write .NET code to use an abstract storage system that can work with a variety of storage, such as local file system and Azure blob.Asp.net Mvc Ajax Infinite Scroll: Asp.net Mvc 4 Ajax Json Infinite Scrollblueblue: tetCar: CArCSharp Generic Data Access: Yet another generic data access for .NETDotNet Manuals: DotNet Manuals aims to provide developers an easy way to create, manage and distribute manuals and various documentation for their applications and libraries.EIB Watcher .Net Library: .Net Library for EIB/NKX bus accessopenGamification: This intends to become an open source gamification framework based on TypeScript.PaginaWebCursoNetAcc: aSimple Person Manager: The application accepts POST requests with JSON data about a Person, stored the values in Azure Table Storage and accepts GET requests to retrieve it back.Stock Track: If you have a small retail store with simple stock management and tracking requirements, this program might work for you. Stock Track easily categorises your ptrapawebapp: testVisualStateManager: This is a simple, but quite powerful mechanism allowing you to separate the application UI from application logic in Windows Forms.Yet Another VirtualBox ToolSet: This is going to be another VirtualBox Toolset.Zodinet: Co ca ngua

Read the article

Towards Ultra-Reusability for ADF - Adaptive Bindings

- by Duncan Mills

The task flow mechanism embodies one of the key value propositions of the ADF Framework, it's primary contribution being the componentization of your applications and implicitly the introduction of a re-use culture, particularly in large applications. However, what if we could do more? How could we make task flows even more re-usable than they are today? Well one great technique is to take advantage of a feature that is already present in the framework, a feature which I will call, for want of a better name, "adaptive bindings". What's an adaptive binding? well consider a simple use case. I have several screens within my application which display tabular data which are all essentially identical, the only difference is that they happen to be based on different data collections (View Objects, Bean collections, whatever) , and have a different set of columns. Apart from that, however, they happen to be identical; same toolbar, same key functions and so on. So wouldn't it be nice if I could have a single parametrized task flow to represent that type of UI and reuse it? Hold on you say, great idea, however, to do that we'd run into problems. Each different collection that I want to display needs different entries in the pageDef file and: I want to continue to use the ADF Bindings mechanism rather than dropping back to passing the whole collection into the taskflow If I do use bindings, there is no way I want to have to declare iterators and tree bindings for every possible collection that I might want the flow to handle Ah, joy! I reply, no need to panic, you can just use adaptive bindings. Defining an Adaptive Binding It's easiest to explain with a simple before and after use case. Here's a basic pageDef definition for our familiar Departments table. <executables> <iterator Binds="DepartmentsView1" DataControl="HRAppModuleDataControl" RangeSize="25" id="DepartmentsView1Iterator"/> </executables> <bindings> <tree IterBinding="DepartmentsView1Iterator" id="DepartmentsView1"> <nodeDefinition DefName="oracle.demo.model.vo.DepartmentsView" Name="DepartmentsView10"> <AttrNames> <Item Value="DepartmentId"/> <Item Value="DepartmentName"/> <Item Value="ManagerId"/> <Item Value="LocationId"/> </AttrNames> </nodeDefinition> </tree> </bindings> Here's the adaptive version: <executables> <iterator Binds="${pageFlowScope.voName}" DataControl="HRAppModuleDataControl" RangeSize="25" id="TableSourceIterator"/> </executables> <bindings> <tree IterBinding="TableSourceIterator" id="GenericView"> <nodeDefinition Name="GenericViewNode"/> </tree> </bindings> You'll notice three changes here. Most importantly, you'll see that the hard-coded View Object name that formally populated the iterator Binds attribute is gone and has been replaced by an expression (${pageFlowScope.voName}). This of course, is key, you can see that we can pass a parameter to the task flow, telling it exactly what VO to instantiate to populate this table! I've changed the IDs of the iterator and the tree binding, simply to reflect that they are now re-usable The tree binding itself has simplified and the node definition is now empty. Now what this effectively means is that the #{node} map exposed through the tree binding will expose every attribute of the underlying iterator's collection - neat! (kudos to Eugene Fedorenko at this point who reminded me that this was even possible in his excellent "deep dive" session at OpenWorld this year) Using the adaptive binding in the UI Now we have a parametrized binding we have to make changes in the UI as well, first of all to reflect the new ID that we've assigned to the binding (of course) but also to change the column list from being a fixed known list to being a generic metadata driven set: <af:table value="#{bindings.GenericView.collectionModel}" rows="#{bindings.GenericView.rangeSize}" fetchSize="#{bindings.GenericView.rangeSize}" emptyText="#{bindings.GenericView.viewable ? 'No data to display.' : 'Access Denied.'}" var="row" rowBandingInterval="0" selectedRowKeys="#{bindings.GenericView.collectionModel.selectedRow}" selectionListener="#{bindings.GenericView.collectionModel.makeCurrent}" rowSelection="single" id="t1"> <af:forEach items="#{bindings.GenericView.attributeDefs}" var="def"> <af:column headerText="#{bindings.GenericView.labels[def.name]}" sortable="true" sortProperty="#{def.name}" id="c1"> <af:outputText value="#{row[def.name]}" id="ot1"/> </af:column> </af:forEach> </af:table> Of course you are not constrained to a simple read only table here. It's a normal tree binding and iterator that you are using behind the scenes so you can do all the usual things, but you can see the value of using ADFBC as the back end model as you have the rich pantheon of UI hints to use to derive things like labels (and validators and converters...) One Final Twist To finish on a high note I wanted to point out that you can take this even further and achieve the ultra-reusability I promised. Here's the new version of the pageDef iterator, see if you can notice the subtle change? <iterator Binds="{pageFlowScope.voName}" DataControl="${pageFlowScope.dataControlName}" RangeSize="25" id="TableSourceIterator"/> Yes, as well as parametrizing the collection (VO) name, we can also parametrize the name of the data control. So your task flow can graduate from being re-usable within an application to being truly generic. So if you have some really common patterns within your app you can wrap them up and reuse then across multiple developments without having to dictate data control names, or connection names. This also demonstrates the importance of interacting with data only via the binding layer APIs. If you keep any code in the task flow generic in that way you can deal with data from multiple types of data controls, not just one flavour. Enjoy!

Read the article

Session Evaluations

- by BuckWoody

I do a lot of public speaking. I write, teach, present and communicate at many levels. I love to do those things. And I love to get better at them. And one of the ways you get better at something is to get feedback on how you did. That being said, I have to confess that I really despise the “evaluations” I get at most venues. From college to technical events to other locations, at Microsoft and points in between, I find these things to be just shy of damaging, and most certainly useless. And it’s not always your fault. Ouch. That seems harsh. But let me ask you one question – and be as honest as you can with the answer – think about it first: “What is the point of a session evaluation?” I’m not saying there isn’t one. In fact, I think there’s a really important reason for them. In my mind, it’s really this: To make the speaker / next session better. Now, if you look at that, you can see right away that most session evals don’t accomplish this goal – not even a little. No, the way that they are worded and the way you (and I) fill them out, it’s more like the implied goal is this: Tell us how you liked this speaker / session. The current ones are for you, not for the speaker or the next person. It’s a popularity contest. Don’t get me wrong. I want to you have a good time. I want you to learn. I want (desperately, oh, please oh please) for you to like me. But in fact, that’s probably not why you went to the session / took the class / read that post. No, you want to learn, and to learn for a particular reason. Remember, I’m talking about college classes, sessions and other class environments here, not a general public event. Most – OK, all – session evaluations make you answer the second goal, not the first. Let’s see how: First, they don’t ask you why you’re there. They don’t ask you if you’re even qualified to evaluate the session or speaker. They don’t ask you how to make it better or keep it great. They use odd numeric scales that are meaningless. For instance, can someone really tell me the difference between a 100-level session and a 200-level one? Between a 400-level and a 500? Is it “internals” (whatever that means) or detail, or length or code, or what? I once heard a great description: A 100-level session makes me say, “wow - I’m smart.” A 500-level session makes me say “wow – that presenter is smart.” And just what is the difference between a 6 and a 7 answer on this question: How well did the speaker know the material? 1 2 3 4 5 6 7 8 9 10 Oh. My. Gosh. How does that make the next session better, or the speaker? And what criteria did you use to answer? And is a “10” better than a “1” (not always clear, and various cultures answer this differently). When it’s all said and done, a speaker basically finds out one thing from the current session evals: “They liked me. They really really liked me.” Or, “Wow. I think I may need to schedule some counseling for the depression I’m about to go into.” You may not think that’s what the speaker hears, but trust me, they do. Those are the only two reactions to the current feedback sheets they get. Either they keep doing what they are doing, or they get their feelings hurt. They just can’t use the information provided to do better. Sorry, but there it is. Keep in mind I do want your feedback. I want to get better. I want you to get your money and time’s worth, probably as much as any speaker alive. But I want those evaluations to be accurate, specific and actionable. I want to know if you had a good time, sure, but I also want to know if I did the right things, and if not, if I can do something different or better. And so, for your consideration, here is the evaluation form I would LOVE for you to use. Feel free to copy it and mail it to me any time. I’m going to put some questions here, and then I’ll even include why they are there. Notice that the form asks you a subjective question right away, and then makes you explain why. That’s work on your part. Notice also that it separates the room and the coffee and the lights and the LiveMeeting from the presenter. So many presenters are faced with circumstances beyond their control, and yet are rated high or low personally on those things. This form helps tease those apart. It’s not numeric. Numbers are easier for the scoring committees but are useless for you and me. So I don’t have any numbers. We’re actually going to have to read these things, not put them in a machine. Hey, if you put in the work to write stuff down, the least we could do is take the time to read it. It’s not anonymous. If you’ve got something to say, say it, and own up to it. People are not “more honest” when they are anonymous, they are less honest. So put your name on it. In fact – this is radical – I posit that these evaluations should be publicly available. Forever. Just like replies to a blog post. Hey, if I’m an organizer, I would LOVE to be able to have access to specific, actionable information on the attendees and the speakers. So if you want mine to be public, go for it. I’ll take the good and the bad. Enjoy. ------------------------------------------------------------------------------------------------------------------------------------------- Session Evaluation – Date, Time, Location, Topic Thanks for giving us your time today. We know that’s valuable, and we hope you learned something you can use from the session. If you can answer these questions as completely as you can, it will help the next person who attends a session here. Your Name: What you do for a living: (We Need your background to evaluate your evaluation) How long you have been doing that: (Again, we need your background to evaluate your evaluation) Paste Session Description Here: (This is what I said I would talk about) Did you like the session? No Meh Yes (General subjective question – overall “feeling”. You’ll tell us why in a minute.) Tell us about the venue. Temperature, lights, coffee, or the online sound, performance, anything other than the speaker and the material. (Helps the logistics to be better or as good for the next person) 1. What did you expect to learn in this session? (How did you interpret that extract – did you have expectations that I should work towards for the next person?) 2. Did you learn what you expected to learn? Why? Be very specific. (This is the most important question there is. It tells us how to make the session better for someone like you.) 3. If you were giving this presentation, would you have done anything differently? What? (Helps us to gauge you, the listener, and might give us a great idea on how to do something better. Thanks!) 4. What will you do with the information you got? (Every presenter wants you to learn, and learn something useful. This will help us do that as well or better)

Read the article

Migration and deployement problems JBoss 4.2.2.GA to JBoss 6.0.0.M2

- by krzyamaneko

Hi, I'm trying to migrate an application running on JBoss 4.2.2.GA to JBoss 6.0.0.M2 I give you some log to explain my problem : boot.log : 2010-03-16 09:59:29,406 ERROR [org.jboss.system.server.profileservice.ProfileServiceBootstrap] (Thread-2) Failed to load profile: Summary of incomplete deployments (SEE PREVIOUS ERRORS FOR DETAILS): DEPLOYMENTS IN ERROR: Deployment "vfszip:/G:/jboss-6.0.0.M2/server/default/deploy/serveur.jar/" is in error due to the following reason(s): java.lang.IllegalStateException: Factory$org.jboss.aspects.remoting.InvokeRemoteInterceptor is already installed. server.log : 11:58:33,156 ERROR [AbstractKernelController] Error installing to PostClassLoader: name=vfszip:/G:/jboss-6.0.0.M2/server/default/deploy/serveur.jar/ state=ClassLoader mode=Manual requiredState=PostClassLoader: org.jboss.deployers.spi.DeploymentException: Cannot process metadata at org.jboss.deployers.spi.DeploymentException.rethrowAsDeploymentException(DeploymentException.java:49) at org.jboss.deployment.AnnotationMetaDataDeployer.deploy(AnnotationMetaDataDeployer.java:196) at org.jboss.deployment.AnnotationMetaDataDeployer.deploy(AnnotationMetaDataDeployer.java:95) at org.jboss.deployers.plugins.deployers.DeployerWrapper.deploy(DeployerWrapper.java:179) at org.jboss.deployers.plugins.deployers.DeployersImpl.doDeploy(DeployersImpl.java:1660) at org.jboss.deployers.plugins.deployers.DeployersImpl.doInstallParentFirst(DeployersImpl.java:1378) at org.jboss.deployers.plugins.deployers.DeployersImpl.doInstallParentFirst(DeployersImpl.java:1431) at org.jboss.deployers.plugins.deployers.DeployersImpl.install(DeployersImpl.java:1319) at org.jboss.dependency.plugins.AbstractControllerContext.install(AbstractControllerContext.java:378) at org.jboss.dependency.plugins.AbstractController.install(AbstractController.java:2029) at org.jboss.dependency.plugins.AbstractController.incrementState(AbstractController.java:1050) at org.jboss.dependency.plugins.AbstractController.executeOrIncrementStateDirectly(AbstractController.java:1289) at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1213) at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1107) at org.jboss.dependency.plugins.AbstractController.change(AbstractController.java:918) at org.jboss.dependency.plugins.AbstractController.change(AbstractController.java:633) at org.jboss.deployers.plugins.deployers.DeployersImpl.process(DeployersImpl.java:898) at org.jboss.deployers.plugins.main.MainDeployerImpl.process(MainDeployerImpl.java:677) at org.jboss.system.server.profileservice.repository.MainDeployerAdapter.process(MainDeployerAdapter.java:117) at org.jboss.system.server.profileservice.repository.ProfileDeployAction.install(ProfileDeployAction.java:70) at org.jboss.system.server.profileservice.repository.AbstractProfileAction.install(AbstractProfileAction.java:53) at org.jboss.system.server.profileservice.repository.AbstractProfileService.install(AbstractProfileService.java:403) at org.jboss.dependency.plugins.AbstractControllerContext.install(AbstractControllerContext.java:378) at org.jboss.dependency.plugins.AbstractController.install(AbstractController.java:2029) at org.jboss.dependency.plugins.AbstractController.incrementState(AbstractController.java:1050) at org.jboss.dependency.plugins.AbstractController.executeOrIncrementStateDirectly(AbstractController.java:1289) at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1213) at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1107) at org.jboss.dependency.plugins.AbstractController.install(AbstractController.java:873) at org.jboss.dependency.plugins.AbstractController.install(AbstractController.java:620) at org.jboss.system.server.profileservice.repository.AbstractProfileService.registerProfile(AbstractProfileService.java:308) at org.jboss.system.server.profileservice.ProfileServiceBootstrap.start(ProfileServiceBootstrap.java:259) at org.jboss.system.server.profileservice.ProfileServiceBootstrap.start(ProfileServiceBootstrap.java:100) at org.jboss.bootstrap.impl.base.server.AbstractServer.startBootstraps(AbstractServer.java:860) at org.jboss.bootstrap.impl.base.server.AbstractServer$StartServerTask.run(AbstractServer.java:441) at java.lang.Thread.run(Thread.java:619) Caused by: java.lang.ClassNotFoundException: common.Main from BaseClassLoader@e1c3a7{vfszip:/G:/jboss-6.0.0.M2/server/default/deploy/serveur.jar/} at org.jboss.classloader.spi.base.BaseClassLoader.loadClass(BaseClassLoader.java:498) at java.lang.ClassLoader.loadClass(ClassLoader.java:248) at org.jboss.deployment.OptAnnotationMetaDataDeployer.processJBossClientMetaData(OptAnnotationMetaDataDeployer.java:105) at org.jboss.deployment.OptAnnotationMetaDataDeployer.processMetaData(OptAnnotationMetaDataDeployer.java:73) at org.jboss.deployment.AnnotationMetaDataDeployer.deploy(AnnotationMetaDataDeployer.java:192) ... 34 more 11:58:40,828 INFO [JMXConnectorServerService] JMX Connector server: service:jmx:rmi://127.0.0.1/jndi/rmi://127.0.0.1:10900/jmxconnector 11:58:46,500 INFO [MailService] Mail Service bound to java:/Mail 11:58:46,593 ERROR [NamingProviderURLWriter] Cannot create a naming service URL file at file:/G:/jboss-6.0.0.M2/server/default/data/jnp-service.url: java.io.IOException: Accès refusé at java.io.WinNTFileSystem.createFileExclusively(Native Method) at java.io.File.createNewFile(File.java:883) at org.jboss.naming.NamingProviderURLWriter.start(NamingProviderURLWriter.java:151) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.jboss.reflect.plugins.introspection.ReflectionUtils.invoke(ReflectionUtils.java:59) at org.jboss.reflect.plugins.introspection.ReflectMethodInfoImpl.invoke(ReflectMethodInfoImpl.java:151) at org.jboss.joinpoint.plugins.BasicMethodJoinPoint.dispatch(BasicMethodJoinPoint.java:66) at org.jboss.kernel.plugins.dependency.KernelControllerContextAction$JoinpointDispatchWrapper.execute(KernelControllerContextAction.java:257) at org.jboss.kernel.plugins.dependency.ExecutionWrapper.execute(ExecutionWrapper.java:47) at org.jboss.kernel.plugins.dependency.KernelControllerContextAction.dispatchExecutionWrapper(KernelControllerContextAction.java:125) at org.jboss.kernel.plugins.dependency.KernelControllerContextAction.dispatchJoinPoint(KernelControllerContextAction.java:72) at org.jboss.kernel.plugins.dependency.LifecycleAction.installActionInternal(LifecycleAction.java:202) at org.jboss.kernel.plugins.dependency.InstallsAwareAction.installAction(InstallsAwareAction.java:54) at org.jboss.kernel.plugins.dependency.InstallsAwareAction.installAction(InstallsAwareAction.java:42) at org.jboss.dependency.plugins.action.SimpleControllerContextAction.simpleInstallAction(SimpleControllerContextAction.java:62) at org.jboss.dependency.plugins.action.AccessControllerContextAction.install(AccessControllerContextAction.java:71) at org.jboss.dependency.plugins.AbstractControllerContextActions.install(AbstractControllerContextActions.java:51) at org.jboss.dependency.plugins.AbstractControllerContext.install(AbstractControllerContext.java:378) at org.jboss.dependency.plugins.AbstractController.install(AbstractController.java:2029) at org.jboss.dependency.plugins.AbstractController.incrementState(AbstractController.java:1050) at org.jboss.dependency.plugins.AbstractController.executeOrIncrementStateDirectly(AbstractController.java:1289) at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1213) at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1107) at org.jboss.dependency.plugins.AbstractController.install(AbstractController.java:873) at org.jboss.dependency.plugins.AbstractController.install(AbstractController.java:620) at org.jboss.deployers.vfs.deployer.kernel.BeanMetaDataDeployer.deploy(BeanMetaDataDeployer.java:180) at org.jboss.deployers.vfs.deployer.kernel.BeanMetaDataDeployer.deploy(BeanMetaDataDeployer.java:58) at org.jboss.deployers.spi.deployer.helpers.AbstractSimpleRealDeployer.internalDeploy(AbstractSimpleRealDeployer.java:62) at org.jboss.deployers.spi.deployer.helpers.AbstractRealDeployer.deploy(AbstractRealDeployer.java:55) at org.jboss.deployers.plugins.deployers.DeployerWrapper.deploy(DeployerWrapper.java:179) at org.jboss.deployers.plugins.deployers.DeployersImpl.doDeploy(DeployersImpl.java:1660) at org.jboss.deployers.plugins.deployers.DeployersImpl.doInstallParentFirst(DeployersImpl.java:1378) at org.jboss.deployers.plugins.deployers.DeployersImpl.doInstallParentFirst(DeployersImpl.java:1399) at org.jboss.deployers.plugins.deployers.DeployersImpl.install(DeployersImpl.java:1319) at org.jboss.dependency.plugins.AbstractControllerContext.install(AbstractControllerContext.java:378) at org.jboss.dependency.plugins.AbstractController.install(AbstractController.java:2029) at org.jboss.dependency.plugins.AbstractController.incrementState(AbstractController.java:1050) at org.jboss.dependency.plugins.AbstractController.executeOrIncrementStateDirectly(AbstractController.java:1289) at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1213) at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1107) at org.jboss.dependency.plugins.AbstractController.change(AbstractController.java:918) at org.jboss.dependency.plugins.AbstractController.change(AbstractController.java:633) at org.jboss.deployers.plugins.deployers.DeployersImpl.process(DeployersImpl.java:898) at org.jboss.deployers.plugins.main.MainDeployerImpl.process(MainDeployerImpl.java:677) at org.jboss.system.server.profileservice.repository.MainDeployerAdapter.process(MainDeployerAdapter.java:117) at org.jboss.system.server.profileservice.repository.ProfileDeployAction.install(ProfileDeployAction.java:70) at org.jboss.system.server.profileservice.repository.AbstractProfileAction.install(AbstractProfileAction.java:53) at org.jboss.system.server.profileservice.repository.AbstractProfileService.install(AbstractProfileService.java:403) at org.jboss.dependency.plugins.AbstractControllerContext.install(AbstractControllerContext.java:378) at org.jboss.dependency.plugins.AbstractController.install(AbstractController.java:2029) at org.jboss.dependency.plugins.AbstractController.incrementState(AbstractController.java:1050) at org.jboss.dependency.plugins.AbstractController.executeOrIncrementStateDirectly(AbstractController.java:1289) at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1213) at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1107) at org.jboss.dependency.plugins.AbstractController.install(AbstractController.java:873) at org.jboss.dependency.plugins.AbstractController.install(AbstractController.java:620) at org.jboss.system.server.profileservice.repository.AbstractProfileService.registerProfile(AbstractProfileService.java:308) at org.jboss.system.server.profileservice.ProfileServiceBootstrap.start(ProfileServiceBootstrap.java:259) at org.jboss.system.server.profileservice.ProfileServiceBootstrap.start(ProfileServiceBootstrap.java:100) at org.jboss.bootstrap.impl.base.server.AbstractServer.startBootstraps(AbstractServer.java:860) at org.jboss.bootstrap.impl.base.server.AbstractServer$StartServerTask.run(AbstractServer.java:441) at java.lang.Thread.run(Thread.java:619) this application works fine on JBoss 4.2.2.GA, if someone have any idea, I need some help.

Search Results

Search found 11015 results on 441 pages for 'explain plan'.

Page 434/441 | < Previous Page | 430 431 432 433 434 435 436 437 438 439 440 441 | Next Page >

- by MarkPearl

- by Shaun

- by DigiMortal

- by dapostolov

- by rituchhibber

- by deadlydog

- by Stephen.Walther

- by Nazgulled

- by Polynomial

- by nikolaosk

- by nikolaosk

- by Simon Cooper

- by Shaun

- by Dewald Galjaard

- by Jeff

- by Jake Rutherford

- by Bob Horn

- by OracleMultitenant

- by Samir R. Bhogayta

- by Duncan Mills

- by BuckWoody

- by krzyamaneko

< Previous Page | 430 431 432 433 434 435 436 437 438 439 440 441 | Next Page >