Search Results

Search found 33443 results on 1338 pages for 'reply list'.

Page 435/1338 | < Previous Page | 431 432 433 434 435 436 437 438 439 440 441 442  | Next Page >

• Fourier transform software

  - by CFP

  Hello everyone! After spending a lot of time searching for this, I thought that some SuperUser gurus might know the answer :) I'm searching for an open source application to compute an FFT, that could: * Import a list of points from a text file (in any format, I could write conversion scripts if needed), for example 0,1; 1,2; 4,5 * Compute the associated discrete transform, and output the list of coefficients Ideally, it would also display the plot and the associated fourier decomposition on the same graph, to allow comparison, but this is not absolutely needed. It can be either on Windows or on Linux/Unix. Can you think of a solution? Thanks, CFP.

  Read the article

• VMWare tools not installing with an error

  - by JDS

  VMWare tools not installing on Ubuntu 12.04. I'm using Chef to manage the installation, but the Apt commands fail if run manually. I'm using the VMWare tool Debian repo. Example: $ cat /etc/apt/sources.list.d/vmware-tools-source.list deb http://packages.vmware.com/tools/esx/5.0u2/ubuntu precise main When trying to install, most packages seem to go ok, but one, "vmware-tools-foundation", does not. Example: $ apt-get -q -y install vmware-tools-esx-nox=8.6.10-1.precise Reading package lists... Building dependency tree... Reading state information... You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: vmware-tools-esx-kmods-3.2.0-23-generic : Depends: vmware-tools-foundation (>= 8.6.10) but it is not going to be installed vmware-tools-esx-nox : Depends: ...snip list of deps... E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). $ apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: vmware-tools-foundation The following NEW packages will be installed: vmware-tools-foundation 0 upgraded, 1 newly installed, 0 to remove and 118 not upgraded. 7 not fully installed or removed. Need to get 0 B/5,886 B of archives. After this operation, 86.0 kB of additional disk space will be used. Do you want to continue [Y/n]? y (Reading database ... 103499 files and directories currently installed.) Unpacking vmware-tools-foundation (from .../vmware-tools-foundation_8.6.10-1.precise_all.deb) ... VMware Tools cannot install because it appears that another installation of VMware Tools is already present. Please remove the previous installation and then attempt to install this copy of VMware Tools again. dpkg: error processing /var/cache/apt/archives/vmware-tools-foundation_8.6.10-1.precise_all.deb (--unpack): subprocess new pre-installation script returned error exit status 1 Errors were encountered while processing: /var/cache/apt/archives/vmware-tools-foundation_8.6.10-1.precise_all.deb E: Sub-process /usr/bin/dpkg returned an error code (1) The key seems to be this error: "VMware Tools cannot install because it appears that another installation of VMware Tools is already present. Please remove the previous installation and then attempt to install this copy of VMware Tools again." However, I've tryed removing and purging and can't seem to "trick" VMWare tools into thinking the packages are gone. Apt thinks they are gone. Is there some service/file/cache/lock left that VMWare tools sees that makes it think that VMWare tools are still installed? I've googled and googled but there is no answer to this question with my particular circumstances on the interwebs. VMWare's documentation of this error is minimal.

  Read the article

• Windows Security Center Service is missing

  - by TheTub

  I am trying to fix a Windows 7 machine here that has been infected with all kinds of Malware. I have removed all of them as far as I can see but I am stumped by one last task. One little bugger managed to remove the Windows Security Center service from the list of Windows services. So I cannot start it or set to automatically start. At the moment I cannot get the Windows firewall to turn on or any anti-virus software. The security center shows the following image when I try: Does anyone know how to add this back to the list of services so I may set it to start. I don't have a backup of the registry for this computer (it's not mine). Many thanks TT

  Read the article

• Customizable mail server - what are my options? [closed]

  - by disappearedng

  This question was originally on SO but it was closed since it is considered off topic. I am interested to build a mail service that allows you to incorporate custom logic in the your mail server. For example, user A can reply to [email protected] once and subsequent emails from user A to [email protected] will not go through until certain actions are taken. I am looking for something simple and customizable, preferably open-sourced. I am fluent in most modern languages. What email servers do you guys recommend for this? Mailgun looks promising, but are there any simpler options?

  Read the article

• How do I configure OpenVPN for accessing the internet with one NIC?

  - by Lekensteyn

  I've been trying to get OpenVPN to work for three days. After reading many questions, the HOWTO, the FAQ and even parts of a guide to Linux networking, I cannot get my an Internet connection to the Internet. I'm trying to set up a OpenVPN server on a VPS, which will be used for: secure access to the Internet bypassing port restrictions (directadmin/2222 for example) an IPv6 connection (my client does only have IPv4 connectivity, while the VPS has both IPv4 and native IPv6 connectivity) (if possible) I can connect to my server and access the machine (HTTP), but Internet connectivity fails completely. I'm using ping 8.8.8.8 for testing whether my connection works or not. Using tcpdump and iptables -t nat -A POSTROUTING -j LOG, I can confirm that the packets reach my server. If I ping to 8.8.8.8 on the VPS, I get an echo-reply from 8.8.8.8 as expected. When pinging from the client, I do not get an echo-reply. The VPS has only one NIC: etho. It runs on Xen. Summary: I want to have a secure connection between my laptop and the Internet using OpenVPN. If that works, I want to have IPv6 connectivity as well. Network setup and software: Home laptop (eth0: 192.168.2.10) (tap0: 10.8.0.2) | | (running Kubuntu 10.10; OpenVPN 2.1.0-3ubuntu1) | wifi | router/gateway (gateway 192.168.2.1) | INTERNET | VPS (eth0:1.2.3.4) (gateway, tap0: 10.8.0.1) (running Debian 6; OpenVPN 2.1.3-2) wifi and my home router should not cause problems since all traffic goes encrypted over UDP port 1194. I've turned IP forwarding on: # echo 1 > /proc/sys/net/ipv4/ip_forward iptables has been configured to allow forwarding traffic as well: iptables -F FORWARD iptables -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A FORWARD -s 10.8.0.0/24 -j ACCEPT iptables -A FORWARD -j DROP I've tried each of these rules separately without luck (flushing the chains before executing): iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j SNAT --to 1.2.3.4 iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE route -n before (server): 1.2.3.4 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 1.2.3.4 0.0.0.0 UG 0 0 0 eth0 route -n after (server): 1.2.3.4 0.0.0.0 255.255.255.0 U 0 0 0 eth0 10.8.0.0 0.0.0.0 255.255.255.0 U 0 0 0 tap0 0.0.0.0 1.2.3.4 0.0.0.0 UG 0 0 0 eth0 route -n before (client): 192.168.2.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0 0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 0 wlan0 route -n after (client): 1.2.3.4 192.168.2.1 255.255.255.255 UGH 0 0 0 wlan0 10.8.0.0 0.0.0.0 255.255.255.0 U 0 0 0 tap0 192.168.2.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0 0.0.0.0 10.8.0.1 128.0.0.0 UG 0 0 0 tap0 128.0.0.0 10.8.0.1 128.0.0.0 UG 0 0 0 tap0 0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 0 wlan0 SERVER config proto udp dev tap ca ca.crt cert server.crt key server.key dh dh1024.pem server 10.8.0.0 255.255.255.0 push "redirect-gateway def1" ifconfig-pool-persist ipp.txt keepalive 10 120 tls-auth ta.key 0 comp-lzo user nobody group nobody persist-key persist-tun log-append openvpn-log verb 3 mute 10 CLIENT config dev tap proto udp remote 1.2.3.4 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert client.crt key client.key ns-cert-type server tls-auth ta.key 1 comp-lzo verb 3 mute 20 traceroute 8.8.8.8 works as expected (similar output without OpenVPN activated): 1 10.8.0.1 (10.8.0.1) 24.276 ms 26.891 ms 29.454 ms 2 gw03.sbp.directvps.nl (178.21.112.1) 31.161 ms 31.890 ms 34.458 ms 3 ge0-v0652.cr0.nik-ams.nl.as8312.net (195.210.57.105) 35.353 ms 36.874 ms 38.403 ms 4 ge0-v3900.cr0.nik-ams.nl.as8312.net (195.210.57.53) 41.311 ms 41.561 ms 43.006 ms 5 * * * 6 209.85.248.88 (209.85.248.88) 147.061 ms 36.931 ms 28.063 ms 7 216.239.49.36 (216.239.49.36) 31.109 ms 33.292 ms 216.239.49.28 (216.239.49.28) 64.723 ms 8 209.85.255.130 (209.85.255.130) 49.350 ms 209.85.255.126 (209.85.255.126) 49.619 ms 209.85.255.122 (209.85.255.122) 52.416 ms 9 google-public-dns-a.google.com (8.8.8.8) 41.266 ms 44.054 ms 44.730 ms If you have any suggestions, please comment or answer. Thanks in advance.

  Read the article

• HOSTS File Edit in Windows 7 Not Effective - Pinging URL Still Shows Original IP Address

  - by Sootah

  I've edited my HOSTS file on my Windows 7 Ultimate PC to re-route a couple of URLs so that they point to 127.0.0.1, but after saving the file (and re-opening to verify the changes were written) and pinging them they still reply with the actual IP instead of being redirected to 127.0.0.1 as they should be. At least, that's how it worked in XP, Vista, etc. I even went so far as to restart my DNS service on the machine via services.msc; but no dice. So - I would imagine that Windows 7 keeps the HOSTS file there for legacy purposes and doesn't actually use it anymore. Is there a way to make W7 pay attention to the HOSTS file? In the event that you can't do that, where would I go to edit where these URLs point to? Thanks in advance! -Sootah

  Read the article

• Bug in CDP implementation

  - by Suraj

  We are developing a Linux based ethernet switch which has 6 ports. We are done with CDP protocol. I have connected a Cisco device to port 2. When I quiery for the Cisco device, I get the reply and instead of getting lan1 (port 1 - lan0 .. port 6 = lan5), I always get the interface name as eth0. The same is the case for all the ports. What changes are required to get the correct interface name? I will be very thankful for the information. The snap packet is received in the routine snap_rcv() in the file "linux._2.6.XX/net/802/psnap.c"; Regards, Suraj..

  Read the article

• Automatically keeping two excel data tables in-sync (w/out VBA)

  - by Neil

  I'm putting together a workbook for tracking a stock portfolio. The primary sheet contains a table with the list of the transactions. From this I would like to create an overview table on another sheet with only one row per unique stock symbol that includes things like cost basis, returns, etc. The problem is that nothing I've tried updates the overview table correctly when rows are added to the transaction table. The closest I've got is something like the following: http://www.get-digital-help.com/2009/04/14/create-a-unique-alphabetically-sorted-list-extracted-from-a-column/ However, this requires applying that formula to every cell in the primary column of the overview sheet. And even then the range of the table isn't extended down to include new rows as they become valid. Essentially I'm looking for a way that auto-adds rows to a table and copies the formula based on a different table changing without using VBA. Trivial example data Sheet1 Symbol Type Shares Price F Buy 100 12 MSFT Buy 100 25 MSFT Sell 50 28 F Buy 100 16 Sheet2 Symbol Quantity F 200 MSFT 50

  Read the article

• Add MS-DOS boot option to Windows 2000

  - by Ben Miller

  I've got an old laptop that is running Windows 2000 & Windows 98 in a multi-boot configuration. I need to add MS-DOS to that list of startup options. I've already added a primary partition, formatted it for FAT16 and made it bootable, and installed MS-DOS 6.22. My question is, how do I add my MS-DOS partition to the list of startup options? More information: My single hard drive has three primary partitions: 0: FAT32 Windows 2000 1: FAT32 Windows 98 2: FAT(16) MS-DOS 6.22 Currently, the boot-up screen lists Windows 2000 and Windows 98 as options, with Windows 2000 as the default choice. My boot.ini file currently looks like this: [Boot Loader] Timeout=30 Default=multi(0)disk(0)rdisk(0)partition(1)\WINNT [Operating Systems] multi(0)disk(0)rdisk(0)partition(1)\WINNT="Microsoft Windows 2000 Professional" /fastdetect C:\="Microsoft Windows 98"

  Read the article

• Ubuntu 9.0.4 Presario S4000NX Fan Speed

  - by Chris C

  I recently install Ubuntu 9.0.4 on a Presario S4000NX and the CPU fan speed is kept at max. With Windows XP installed the fan speed would increase/decrease as required. I've tried to install lm-sensors and run the sensors-detect. It recommended that I load the modules which I did: smsc47m192 i2c-i801 When running sensor-detect it gave me this strange message: Trying family SMSC Found SMSC LPC47M15x/192/997 Super IO Fan Sensors (but not activated) Running the sensors command gives me a list of voltages and CPU and temperature but doesn't list any fans. After doing some Internet research I then tried to load the smsc47m1 module but I get the following error: FATAL: Error inserting smsc47m1 (/lib/modules/2.6.28-15-generic/kernel/drivers/hwmon/smsc47m1.ko): no such device The file smsc47m1.ko does exist in the listed folder. Any suggestions for getting the fan speed (and the noise) down in Ubuntu? Thanx. - Chris P.S. - I would have put better tags but Server Fault wouldn't let me.

  Read the article

• Bash Completion Script Help

  - by inxilpro

  So I'm just starting to learn about bash completion scripts, and I started to work on one for a tool I use all the time. First I built the script using a set list of options: _zf_comp() { local cur prev actions COMPREPLY=() cur="${COMP_WORDS[COMP_CWORD]}" prev="${COMP_WORDS[COMP_CWORD-1]}" actions="change configure create disable enable show" COMPREPLY=($(compgen -W "${actions}" -- ${cur})) return 0 } complete -F _zf_comp zf This works fine. Next, I decided to dynamically create the list of available actions. I put together the following command: zf | grep "Providers and their actions:" -A 100 | grep -P "^\s*\033\[36m\s*zf" | awk '{gsub(/[[:space:]]*/, "", $3); print $3}' | sort | uniq | awk '{sub("\-", "\\-", $1); print $1}' | tr \\n " " | sed 's/^ *\(.*\) *$/\1/' Which basically does the following: Grabs all the text in the "zf" command after "Providers and their actions:" Grabs all the lines that start with "zf" (I had to do some fancy work here 'cause the ZF command prints in color) Grab the second piece of the command and remove any spaces from it (the spaces part is probably not needed any more) Sort the list Get rid of any duplicates Escape dashes (I added this when trying to debug the problem—probably not needed) Trim all new lines Trim all leading and ending spaces The above command produces: $ zf | grep "Providers and their actions:" -A 100 | grep -P "^\s*\033\[36m\s*zf" | awk '{gsub(/[[:space:]]*/, "", $3); print $3}' | sort | uniq | awk '{sub("\-", "\\-", $1); print $1}' | tr \\n " " | sed 's/^ *\(.*\) *$/\1/' change configure create disable enable show $ So it looks to me like it's producing the exact same string as I had in my original script. But when I do: _zf_comp() { local cur prev actions COMPREPLY=() cur="${COMP_WORDS[COMP_CWORD]}" prev="${COMP_WORDS[COMP_CWORD-1]}" actions=`zf | grep "Providers and their actions:" -A 100 | grep -P "^\s*\033\[36m\s*zf" | awk '{gsub(/[[:space:]]*/, "", $3); print $3}' | sort | uniq | awk '{sub("\-", "\\-", $1); print $1}' | tr \\n " " | sed 's/^ *\(.*\) *$/\1/'` COMPREPLY=($(compgen -W "${actions}" -- ${cur})) return 0 } complete -F _zf_comp zf My autocompletion starts acting up. First, it won't autocomplete anything with an "n" in it, and second, when it does autocomplete ("zf create" for example) it won't let me backspace over my completed command. The first issue I'm completely stumped on. The second I'm thinking might have to do with escape characters from the colored text. Any ideas? It's driving me crazy!

  Read the article

• SSL Proxy: Forwarding without the encryption

  - by John

  I have a python application listening on port 9001 for HTTP traffic. I'm trying to configure Apache (or anything, really) to listen on port 443 for HTTPS connections, and then forward the connection, sans encryption, to port 9001 on the same machine. My application would then reply via the proxy, where the encryption would be reapplied, and returned to the client transparently. I'm not doing anything crazy with the site names and SSL certs, I have one public IP, one hostname, and one SSL cert. Stripping the encryption at the proxy doesn't seem to be a common requirement. Is what I'm asking for a normal requirement? Are there other concerns with this sort of configuration?

  Read the article

• Android Software for the SysAdmin on the move.

  - by GruffTech

  So my company has over service through Verizon, and AT&T Service in the area is "shoddy" at its best, so i haven't been able to join the "iPhone party" like so many of my fellow SysAdmins have been able to. That being said, this week finally i phone i like has hit Verizon, the HTC Incredible. (I've been waiting for the Desire or Nexus One, but after seeing spec sheets and reviews, HTC Incredible comes out ahead anyway). So (finally) I'm looking for Android Apps that are "gotta-haves" for System Admins. I've found the bottom three, If there's others you prefer over these let me know. RDP Program - RemoteRDP SSH Client - ConnectBot Nagios - NagMonDroid Reply with your favorite Android App and Why!

  Read the article

• Restore e-mail from "junk e-mail" folder

  - by soonts

  I'm using MS Office Outlook 2007. I check my "Junk E-mail" folder ~once a month. This time I found that my whole google groups correspondence is there. I right-clicked a message and pressed "Add sender to safe senders list". Hopefully, the future messages to this group will be delivered to my inbox. The problem is with the messages that are already in the junk folder. Is there a way to resort my junk folder automatically, to have e-mails from senders listed on my safe list being recovered from the junk folder and moved to e.g. Inbox folder ? Thanks in advance.

  Read the article

• VPN Server Problem

  - by vikas-2007bajaj

  Hi, I have Configure VPN Server for Online share Trading. I have so many VPN Clients in my VPN Server. Sometimes my VPN Clients disconnected from Systems but it shows in system tray i.e. connected but we are not able to access my application on the server.Then I disabled my Local area connection on client machine but it doesn't effect until I restart my System again.Firstly I want to know Task Manager Service for my VPN Client & how this problem can be remove.Waiting for reply. Thanks, Vikas Bajaj

  Read the article

• Browsers ignoring hosts file

  - by madkris

  Until recently my browsers started to ignore my hosts file. I have Windows 7 operating system installed. 192.168.0.5 livesite.com I have tried: Clearing browser cache Issued "ipconfig /flushdns" from the command line Issued "ping livesite.com" from the command line (response was "Reply from 192.168.0.5: bytes=32 time=1ms TTL=128") Restarting unit Backing up original hosts file and making a new one Checking lmhosts.sam (everything is commented out) Connecting directly to modem using cable Checked \HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\DataBasePath Tried it on another laptop with exactly the specs as I have Then I tried Changing entry to "127.0.0.1 livesite.com" (ping ok, browser ok) Changing entry to "192.168.0.5 livesite.com" (ping ok, browser ok but only for a sec) Issued "ipconfig /flushdns" from the command line (ping ok, browser not ok) Changing entry to "127.0.0.1 livesite.com" (ping ok, browser ok) Changing entry to "192.168.0.5 livesite.com" (ping ok, browser not ok) Issued "ipconfig /flushdns" from the command line (ping ok, browser not ok) Any idea why it worked for a moment? Or better yet anything I havent tried or some error I may have overlooked?

  Read the article

• DNS responding only to nslookup in Windows 7

  - by DeeJay1

  Hello. I have an interesting DNS issue in AD (2008R2) which I can't find a way to debug. Mainly if from commandline I try ping <machinename> then I get the reply that the hostr isn't found. But when I do nslookup <machinename> I get the correct response from my DNS with proper AAAA and A records. Anyone has an idea what could cause this? The client machines run Windows 7 Enterprise.

  Read the article

• Send individual e-mails to each contact in Gmail?

  - by Robert C. Cartaino

  I'm trying to send an e-mail to a group of contacts in Gmail (200 recipients, no spam). Is there a way to force Gmail to send the e-mail as 200 individual e-mails, each addressed to that specific person in the list? But I'm trying to protect their privacy: Sending to a contact group puts all their e-mail addresses in the To: field. Adding their addresses to the cc: field means everyone can see all the addresses. Adding their addresses to the bcc: field means that no one sees their address (not even their own) in the to: field. That looks odd and seems like that would trigger a lot of spam filters. So how can I force Gmail to send the e-mail addressed specifically to each contact in the list?

  Read the article

• postfix error: open database /var/lib/mailman/data/aliases.db: No such file

  - by Thufir

  In trying to follow the Ubuntu guide for postfix and mailman, I do not understand these directions: This build of mailman runs as list. It must have permission to read /etc/aliases and read and write /var/lib/mailman/data/aliases. Do this with these commands: sudo chown root:list /var/lib/mailman/data/aliases sudo chown root:list /etc/aliases Save and run: sudo newaliases I'm getting this kind of error: root@dur:~# root@dur:~# root@dur:~# telnet localhost 25 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. 220 dur.bounceme.net ESMTP Postfix (Ubuntu) ehlo dur 250-dur.bounceme.net 250-PIPELINING 250-SIZE 10240000 250-VRFY 250-ETRN 250-STARTTLS 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 DSN quit 221 2.0.0 Bye Connection closed by foreign host. root@dur:~# root@dur:~# tail /var/log/mail.log Aug 28 01:16:43 dur postfix/master[19444]: terminating on signal 15 Aug 28 01:16:43 dur postfix/postfix-script[19558]: starting the Postfix mail system Aug 28 01:16:43 dur postfix/master[19559]: daemon started -- version 2.9.1, configuration /etc/postfix Aug 28 01:16:45 dur postfix/postfix-script[19568]: stopping the Postfix mail system Aug 28 01:16:45 dur postfix/master[19559]: terminating on signal 15 Aug 28 01:16:45 dur postfix/postfix-script[19673]: starting the Postfix mail system Aug 28 01:16:45 dur postfix/master[19674]: daemon started -- version 2.9.1, configuration /etc/postfix Aug 28 01:17:22 dur postfix/smtpd[19709]: error: open database /var/lib/mailman/data/aliases.db: No such file or directory Aug 28 01:17:22 dur postfix/smtpd[19709]: connect from localhost[127.0.0.1] Aug 28 01:18:37 dur postfix/smtpd[19709]: disconnect from localhost[127.0.0.1] root@dur:~# root@dur:~# postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases, hash:/var/lib/mailman/data/aliases append_dot_mydomain = no biff = no broken_sasl_auth_clients = yes config_directory = /etc/postfix default_transport = smtp home_mailbox = Maildir/ inet_interfaces = loopback-only mailbox_command = /usr/lib/dovecot/deliver -c /etc/dovecot/conf.d/01-mail-stack-delivery.conf -m "${EXTENSION}" mailbox_size_limit = 0 mailman_destination_recipient_limit = 1 mydestination = dur, dur.bounceme.net, localhost.bounceme.net, localhost myhostname = dur.bounceme.net mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 readme_directory = no recipient_delimiter = + relay_domains = lists.dur.bounceme.net relay_transport = relay relayhost = smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtp_use_tls = yes smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_recipient_restrictions = reject_unknown_sender_domain, reject_unknown_recipient_domain, reject_unauth_pipelining, permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_authenticated_header = yes smtpd_sasl_local_domain = $myhostname smtpd_sasl_path = private/dovecot-auth smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot smtpd_tls_auth_only = yes smtpd_tls_cert_file = /etc/ssl/certs/ssl-mail.pem smtpd_tls_key_file = /etc/ssl/private/ssl-mail.key smtpd_tls_mandatory_ciphers = medium smtpd_tls_mandatory_protocols = SSLv3, TLSv1 smtpd_tls_received_header = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes tls_random_source = dev:/dev/urandom transport_maps = hash:/etc/postfix/transport root@dur:~# root@dur:~# And am wondering what connection might be. I do see that I don't have the requisite files: root@dur:~# root@dur:~# ll /var/lib/mailman/data/aliases ls: cannot access /var/lib/mailman/data/aliases: No such file or directory root@dur:~# At what stage were those aliases created? How can I create them? Is that what's causing the error error: open database /var/lib/mailman/data/aliases.db: No such file or directory Aug 28 01:17:22 dur postfix/smtpd[19709]: connect from localhost[127.0.0.1]?

  Read the article

• Getting my IP off the hotmail blacklist

  - by Kai

  I got a new server with a new IP address. Apparently this IP is listed in the hotmail blacklists so that I can't send mails to hotmail users out of my webapplication. postfix/smtp[24706]: 8F31C9404B: to=<[email protected]>, relay=mx3.hotmail.com[65.55.37.88]:25, delay=0.66, delays=0.01/0/0.48/0.16, dsn=5.0.0, status=bounced (host mx3.hotmail.com[65.55.37.88] said: 550 SC-001 Unfortunately, messages from 78.47.228.xxx weren't sent. Please contact your Internet service provider since part of their network is on our block list. You can also refer your provider to http://mail.live.com/mail/troubleshooting.aspx#errors. (in reply to MAIL FROM command)) My hoster will not help me get that address removed from the blacklist. So I tried to find a way to do it on my own, but I can't find a way to ask Microsoft to remove my IP from that list. Has anyone managed to remove a falsely listed address? And if yes: how?

  Read the article

• Many users send using a single address, replies to that single address go to many users

  - by Keyslinger

  I work in an office with a Microsoft Exchange server for email. I would like to have the following workflow: John, Mary, or Sam send a message from Outlook on their respective computers. The customer receives the message from the address "[email protected]" The customer replies to the message from [email protected] and it is received by John, Mary, or Sam depending on who sent the message (if it was sent by John, the reply is sent to John, and so on). All users should also be able to send emails from their respective addresses as well (e.g. [email protected], etc.) Is this possible? If so, how can it be accomplished?

  Read the article

• Cisco Pix does not let traffic pass from outside to inside even though ACL permits

  - by Rickard

  I have tried to make my pix 515 allow traffic from outisde interface to inside, but despite permitting ACL's, it doesn't seem to let traffic through. (It is letting traffic out as it should though) I am have tried both of the following: access-list acl_in extended permit tcp any host 10.131.73.2 eq www and access-list acl_in extended permit ip any any None of them help, but I can access 10.131.73.2 from any host on the inside network. This is a one single host on the inside that should every now and then have an HTTP server running for development purpouses, so it doesn't need to reside on DMZ (and as far as I know, I can't place it on DMZ either as it's in the same subnet as the other ip's I have. Could I have missed anything? I am using PIX Version 8.0(4) My current running config looks like this: http://pastebin.com/TvRFyDrF Hope someone can help me get this working.

  Read the article

• Many users send using a single address, replies to that single address go to many users

  - by Keyslinger

  I work in an office with a Microsoft Exchange server for email. I would like to have the following workflow: John, Mary, or Sam send a message from Outlook on their respective computers. The customer receives the message from the address "[email protected]" The customer replies to the message from [email protected] and it is received by John, Mary, or Sam depending on who sent the message (if it was sent by John, the reply is sent to John, and so on). All users should also be able to send emails from their respective addresses as well (e.g. [email protected], etc.) Is this possible? If so, how can it be accomplished?

  Read the article

• Amazon EC2 pem file stopped working suddenly

  - by Jashwant

  I was connecting to Amazon EC2 through SSH and it was working well. But all of a sudden, it stopped working. I am not able to connect anymore with the same key file. What can go wrong ? Here's the debug info. ssh -vvv -i ~/Downloads/mykey.pem [email protected] OpenSSH_6.1p1 Debian-4, OpenSSL 1.0.1c 10 May 2012 debug1: Reading configuration data /etc/ssh/ssh_config debug1: /etc/ssh/ssh_config line 19: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to ec2-54-222-60-78.eu.compute.amazonaws.com [54.229.60.78] port 22. debug1: Connection established. debug3: Incorrect RSA1 identifier debug3: Could not load "/home/jashwant/Downloads/mykey.pem" as a RSA1 public key debug1: identity file /home/jashwant/Downloads/mykey.pem type -1 debug1: identity file /home/jashwant/Downloads/mykey.pem-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.9p1 Debian-5ubuntu1.1 debug1: match: OpenSSH_5.9p1 Debian-5ubuntu1.1 pat OpenSSH_5* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_6.1p1 Debian-4 debug2: fd 3 setting O_NONBLOCK debug3: load_hostkeys: loading entries for host "ec2-54-222-60-78.eu.compute.amazonaws.com" from file "/home/jashwant/.ssh/known_hosts" debug3: load_hostkeys: found key type ECDSA in file /home/jashwant/.ssh/known_hosts:4 debug3: load_hostkeys: loaded 1 keys debug3: order_hostkeyalgs: prefer hostkeyalgs: [email protected],[email protected],[email protected],ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: [email protected],[email protected],[email protected],ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,[email protected],[email protected],[email protected],[email protected],ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 none debug1: sending SSH2_MSG_KEX_ECDH_INIT debug1: expecting SSH2_MSG_KEX_ECDH_REPLY debug1: Server host key: ECDSA d8:05:8e:fe:37:2d:1e:2c:f1:27:c2:e7:90:7f:45:48 debug3: load_hostkeys: loading entries for host "ec2-54-222-60-78.eu.compute.amazonaws.com" from file "/home/jashwant/.ssh/known_hosts" debug3: load_hostkeys: found key type ECDSA in file /home/jashwant/.ssh/known_hosts:4 debug3: load_hostkeys: loaded 1 keys debug3: load_hostkeys: loading entries for host "54.229.60.78" from file "/home/jashwant/.ssh/known_hosts" debug3: load_hostkeys: found key type ECDSA in file /home/jashwant/.ssh/known_hosts:5 debug3: load_hostkeys: loaded 1 keys debug1: Host 'ec2-54-222-60-78.eu.compute.amazonaws.com' is known and matches the ECDSA host key. debug1: Found key in /home/jashwant/.ssh/known_hosts:4 debug1: ssh_ecdsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: jashwant@jashwant-linux (0x7f827cbe4f00) debug2: key: /home/jashwant/Downloads/mykey.pem ((nil)) debug1: Authentications that can continue: publickey debug3: start over, passed a different list publickey debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: jashwant@jashwant-linux debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey debug1: Trying private key: /home/jashwant/Downloads/mykey.pem debug1: read PEM private key done: type RSA debug3: sign_and_send_pubkey: RSA 9b:7d:9f:2e:7a:ef:51:a2:4e:fb:0c:c0:e8:d4:66:12 debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey debug2: we did not send a packet, disable method debug1: No more authentication methods to try. Permission denied (publickey). I've already googled everything and checked : Public DNS is same (It hasnt changed), Username is ubuntu as it's a Ubuntu AMI ( Used the same earlier), Permission is 400 on mykey.pem file ssh port is enabled via security groups ( Used the same ealier )

  Read the article

• SMTP port open - but not open

  - by Frederik Nielsen

  As some of you might know, I am setting up an exchange server. Now I ran into another problem: I cannot connect to the SMTP service from outside the server! The ports are opened in the gateway device (a ZyXEL USG50), Windows firewall is off. I see the packets travekl through the ZyXEL firewall, and I can also see the packets with wireshark on the server, so I know they are getting all the way in to the server. I also know it receives them, and sends out the reply - and this is where things go bad! Analyzing with wireshark, I get these errors in the return packets: Header checksum: 0x0000 [incorrect, should be 0x0779 (may be caused by "IP checksum offload"?)] And: Acknowledgment Number: 0x8e3337d1 [should be 0x00000000 because ACK flag is not set] What the (sorry my French) hell is going on? I really cant figure it out.. Thanks in advance.

  Read the article

< Previous Page | 431 432 433 434 435 436 437 438 439 440 441 442  | Next Page >