Search Results

Search found 33443 results on 1338 pages for 'reply list'.

Page 433/1338 | < Previous Page | 429 430 431 432 433 434 435 436 437 438 439 440  | Next Page >

• Windows 7 does not recognise second display output

  - by gilles27

  I've got a PC with dual BenQ G2222HDL monitors and an ATI Radeon HD 4650 video card. I've been running both monitors at 1920x1080 for some months now but last week the second monitor switched to a lower resolution and won't let me go back to 1920x1080. If I right click the Desktop and choose Screen Resolution from the menu, I get two items in the Display: drop down list BenQ G2222HDL D-SUB Display device on: VGA In the past 2 was always the same as 1. If I click Detect a third item appears Available display output on: ATI Radeon HD 4650 but if I use the Multiple displays: drop down list to use it says "No display detected" and then lets me choose from either "Connect anyway on S-Video" or "Connect anyway on Component", neither of which help. It seems like Windows 7 recognises the card is dual-head, and knows I have got two monitors, but can't link it all together. I have checked and all my drivers are up-to-date. Does anyone have any suggestions as to how I can get the second monitor working properly again?

  Read the article

• Gre Tunnel Cisco Linux traffic forwarding

  - by mezgani

  I setup a gre tunnel a cisco router and a Linux machine, the tunnel interface in the Linux box named pic. Well i have to forward traffic coming from cisco through the Linux box. the rules i've set in the Linux box is described as follow: echo "1" /proc/sys/net/ipv4/ip_forward iptables -A INPUT -p 47 -j ACCEPT iptables -A FORWARD -i ppp0 -j ACCEPT iptables -A FORWARD -i pic -o ppp0 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -i ppp0 -o pic -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -t nat -A POSTROUTING -o ppp0 -j MASQUERADE I see the traffic coming from tunnel and forwarded to internet but no reply from sent packet. May i miss something like a routing rule.

  Read the article

• VSFTPD Unable to set write permissions on folder

  - by Frank Astin

  I've just set up my first FTP server with VSFTPD on cent os . I can connect to it fine using a user in the group ftp-users but I get read only access . I've tried several different CHMOD codes on the folder (even 777) all to no avail . This is the tutorial I used to set up the server http://tinyurl.com/73pyuxz hopefully you'll be able to see something I missed. Thanks in advance . Requested Config File : # Example config file /etc/vsftpd/vsftpd.conf # # The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults. # # READ THIS: This example file is NOT an exhaustive list of vsftpd options. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's # capabilities. # # Allow anonymous FTP? (Beware - allowed by default if you comment this out). anonymous_enable=NO # # Uncomment this to allow local users to log in. local_enable=YES # # Uncomment this to enable any form of FTP write command. write_enable=YES # # Default umask for local users is 077. You may wish to change this to 022, # if your users expect that (022 is used by most other ftpd's) local_umask=022 # # Uncomment this to allow the anonymous FTP user to upload files. This only # has an effect if the above global write enable is activated. Also, you will # obviously need to create a directory writable by the FTP user. #anon_upload_enable=YES # # Uncomment this if you want the anonymous FTP user to be able to create # new directories. #anon_mkdir_write_enable=YES # # Activate directory messages - messages given to remote users when they # go into a certain directory. dirmessage_enable=YES # # The target log file can be vsftpd_log_file or xferlog_file. # This depends on setting xferlog_std_format parameter xferlog_enable=YES # # Make sure PORT transfer connections originate from port 20 (ftp-data). connect_from_port_20=YES # # If you want, you can arrange for uploaded anonymous files to be owned by # a different user. Note! Using "root" for uploaded files is not # recommended! #chown_uploads=YES #chown_username=whoever # # The name of log file when xferlog_enable=YES and xferlog_std_format=YES # WARNING - changing this filename affects /etc/logrotate.d/vsftpd.log #xferlog_file=/var/log/xferlog # # Switches between logging into vsftpd_log_file and xferlog_file files. # NO writes to vsftpd_log_file, YES to xferlog_file xferlog_std_format=YES # # You may change the default value for timing out an idle session. #idle_session_timeout=600 # # You may change the default value for timing out a data connection. #data_connection_timeout=120 # # It is recommended that you define on your system a unique user which the # ftp server can use as a totally isolated and unprivileged user. #nopriv_user=ftpsecure # # Enable this and the server will recognise asynchronous ABOR requests. Not # recommended for security (the code is non-trivial). Not enabling it, # however, may confuse older FTP clients. #async_abor_enable=YES # # By default the server will pretend to allow ASCII mode but in fact ignore # the request. Turn on the below options to have the server actually do ASCII # mangling on files when in ASCII mode. # Beware that on some FTP servers, ASCII support allows a denial of service # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd # predicted this attack and has always been safe, reporting the size of the # raw file. # ASCII mangling is a horrible feature of the protocol. #ascii_upload_enable=YES #ascii_download_enable=YES # # You may fully customise the login banner string: #ftpd_banner=Welcome to blah FTP service. # # You may specify a file of disallowed anonymous e-mail addresses. Apparently # useful for combatting certain DoS attacks. #deny_email_enable=YES # (default follows) #banned_email_file=/etc/vsftpd/banned_emails # # You may specify an explicit list of local users to chroot() to their home # directory. If chroot_local_user is YES, then this list becomes a list of # users to NOT chroot(). #chroot_list_enable=YES # (default follows) #chroot_list_file=/etc/vsftpd/chroot_list # # You may activate the "-R" option to the builtin ls. This is disabled by # default to avoid remote users being able to cause excessive I/O on large # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume # the presence of the "-R" option, so there is a strong case for enabling it. #ls_recurse_enable=YES # # When "listen" directive is enabled, vsftpd runs in standalone mode and # listens on IPv4 sockets. This directive cannot be used in conjunction # with the listen_ipv6 directive. listen=YES # # This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6 # sockets, you must run two copies of vsftpd whith two configuration files. # Make sure, that one of the listen options is commented !! #listen_ipv6=YES pam_service_name=vsftpd userlist_enable=YES tcp_wrappers=YES

  Read the article

• Windows 2003 Cluster: Failover Delay

  - by Ramon Marco Navarro

  I am testing the failover policies of our test failover cluster system. When I shutdown the node who is currently controlling the cluster (NODE1), it takes about 2 mins and 40 seconds before the next node on the preferred list (NODE2) takes control of the cluster. I tried changing the looksAlive and isAlive interval to 5000ms to all resources, but that didn't help. Looking at the Event Viewer of the remaining nodes, it shows that it was almost instantly detected that NODE1 was down. But it took another ~2:40 minutes for it to be removed from the live cluster list and for NODE2 to take over. Is there anyway of changing or shortening this "failover delay"? This is the setup of the cluster: (1) One ClusterDC connected to the public network (3) Three nodes running Win2003 with a quorum type of MNS Private network is connected to network hub ________________ _________________ (ClusterDC)=------=| |=------=(Node1)=------=| | |Public Network|=------=(Node2)=------=|Private Network| | (Switch) |=------=(Node3)=------=| (Hub) | ---------------- -----------------

  Read the article

• SSH Login to an EC2 instance failing with previously working keys...

  - by Matthew Savage

  We recently had an issues where I had rebooted our EC2 instance (Ubuntu x86_64, version 9.10 server) and due to an EC2 issue the instance needed to be stopped and was down for a few days. Now I have been able to bring the instance back online I cannot connect to SSH using the keypair which previously worked. Unfortunately SSH is the only way to get into this server, and while I have another system running in its place there are a number of things I would like to try and retrieve from the machine. Running SSH in verbose mode yields the following: [Broc-MBP.local]: Broc:~/.ssh ? ssh -i ~/.ssh/EC2Keypair.pem -l ubuntu ec2-xxx.compute-1.amazonaws.com -vvv OpenSSH_5.2p1, OpenSSL 0.9.8l 5 Nov 2009 debug1: Reading configuration data /Users/Broc/.ssh/config debug1: Reading configuration data /etc/ssh_config debug2: ssh_connect: needpriv 0 debug1: Connecting to ec2-xxx.compute-1.amazonaws.com [184.73.109.130] port 22. debug1: Connection established. debug3: Not a RSA1 key file /Users/Broc/.ssh/EC2Keypair.pem. debug2: key_type_from_name: unknown key type '-----BEGIN' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-----END' debug3: key_read: missing keytype debug1: identity file /Users/Broc/.ssh/EC2Keypair.pem type -1 debug3: Not a RSA1 key file /Users/Broc/.ssh/id_rsa. debug2: key_type_from_name: unknown key type '-----BEGIN' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-----END' debug3: key_read: missing keytype debug1: identity file /Users/Broc/.ssh/id_rsa type 1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.1p1 Debian-6ubuntu2 debug1: match: OpenSSH_5.1p1 Debian-6ubuntu2 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.2 debug2: fd 3 setting O_NONBLOCK debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 123/256 debug2: bits set: 500/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug3: check_host_in_hostfile: filename /Users/Broc/.ssh/known_hosts debug3: check_host_in_hostfile: match line 106 debug3: check_host_in_hostfile: filename /Users/Broc/.ssh/known_hosts debug3: check_host_in_hostfile: match line 106 debug1: Host 'ec2-xxx.compute-1.amazonaws.com' is known and matches the RSA host key. debug1: Found key in /Users/Broc/.ssh/known_hosts:106 debug2: bits set: 521/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /Users/Broc/.ssh/id_rsa (0x100125f70) debug2: key: /Users/Broc/.ssh/EC2Keypair.pem (0x0) debug1: Authentications that can continue: publickey debug3: start over, passed a different list publickey debug3: preferred publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering public key: /Users/Broc/.ssh/id_rsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey debug1: Trying private key: /Users/Broc/.ssh/EC2Keypair.pem debug1: read PEM private key done: type RSA debug3: sign_and_send_pubkey debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey debug2: we did not send a packet, disable method debug1: No more authentication methods to try. Permission denied (publickey). [Broc-MBP.local]: Broc:~/.ssh ? So, right now I'm really at a loss and not sure what to do. While I've already got another system taking the place of this one I'd really like to have access back :|

  Read the article

• vsftpd not allowing uploads. 550 response

  - by Josh

  I've set vsftpd up on a centos box. I keep trying to upload files but I keep getting "550 Failed to change directory" and "550 Could not get file size." Here's my vsftpd.conf # The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults. # # READ THIS: This example file is NOT an exhaustive list of vsftpd options. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's # capabilities. # # Allow anonymous FTP? (Beware - allowed by default if you comment this out). anonymous_enable=YES # # Uncomment this to allow local users to log in. local_enable=YES # # Uncomment this to enable any form of FTP write command. write_enable=YES # # Default umask for local users is 077. You may wish to change this to 022, # if your users expect that (022 is used by most other ftpd's) local_umask=022 # # Uncomment this to allow the anonymous FTP user to upload files. This only # has an effect if the above global write enable is activated. Also, you will # obviously need to create a directory writable by the FTP user. anon_upload_enable=YES # # Uncomment this if you want the anonymous FTP user to be able to create # new directories. anon_mkdir_write_enable=YES anon_other_write_enable=YES # # Activate directory messages - messages given to remote users when they # go into a certain directory. dirmessage_enable=YES # # The target log file can be vsftpd_log_file or xferlog_file. # This depends on setting xferlog_std_format parameter xferlog_enable=YES # # Make sure PORT transfer connections originate from port 20 (ftp-data). connect_from_port_20=YES # # If you want, you can arrange for uploaded anonymous files to be owned by # a different user. Note! Using "root" for uploaded files is not # recommended! #chown_uploads=YES #chown_username=whoever # # The name of log file when xferlog_enable=YES and xferlog_std_format=YES # WARNING - changing this filename affects /etc/logrotate.d/vsftpd.log #xferlog_file=/var/log/xferlog # # Switches between logging into vsftpd_log_file and xferlog_file files. # NO writes to vsftpd_log_file, YES to xferlog_file xferlog_std_format=NO # # You may change the default value for timing out an idle session. #idle_session_timeout=600 # # You may change the default value for timing out a data connection. #data_connection_timeout=120 # # It is recommended that you define on your system a unique user which the # ftp server can use as a totally isolated and unprivileged user. #nopriv_user=ftpsecure # # Enable this and the server will recognise asynchronous ABOR requests. Not # recommended for security (the code is non-trivial). Not enabling it, # however, may confuse older FTP clients. #async_abor_enable=YES # # By default the server will pretend to allow ASCII mode but in fact ignore # the request. Turn on the below options to have the server actually do ASCII # mangling on files when in ASCII mode. # Beware that on some FTP servers, ASCII support allows a denial of service # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd # predicted this attack and has always been safe, reporting the size of the # raw file. # ASCII mangling is a horrible feature of the protocol. #ascii_upload_enable=YES #ascii_download_enable=YES # # You may fully customise the login banner string: #ftpd_banner=Welcome to blah FTP service. # # You may specify a file of disallowed anonymous e-mail addresses. Apparently # useful for combatting certain DoS attacks. #deny_email_enable=YES # (default follows) #banned_email_file=/etc/vsftpd/banned_emails # # You may specify an explicit list of local users to chroot() to their home # directory. If chroot_local_user is YES, then this list becomes a list of # users to NOT chroot(). #chroot_list_enable=YES # (default follows) #chroot_list_file=/etc/vsftpd/chroot_list # # You may activate the "-R" option to the builtin ls. This is disabled by # default to avoid remote users being able to cause excessive I/O on large # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume # the presence of the "-R" option, so there is a strong case for enabling it. #ls_recurse_enable=YES # # When "listen" directive is enabled, vsftpd runs in standalone mode and # listens on IPv4 sockets. This directive cannot be used in conjunction # with the listen_ipv6 directive. listen=YES # This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6 # sockets, you must run two copies of vsftpd whith two configuration files. # Make sure, that one of the listen options is commented !! #listen_ipv6=YES pam_service_name=vsftpd userlist_enable=YES tcp_wrappers=YES log_ftp_protocol=YES banner_file=/etc/vsftpd/issue local_root=/var/www guest_enable=YES guest_username=ftpusr ftp_username=nobody

  Read the article

• Is it possible to aggregate multiple email accounts into a single Outlook 2007 Inbox/.OST file?

  - by Howiecamp

  I'm using Outlook 2007 and would like to combine multiple email accounts (some are Exchange, some IMAP) into a single Inbox/.OST mail file. An example of the functionality I'm looking for is the Blackberry, where you can configure multiple email accounts and then access that mail either by the inbox for that specific account or via a single aggregated mailbox. In the single mailbox case, when you reply to a given piece of mail the Blackberry is smart enough to switch your "From" address to be that of the account where the email came in to. I'm essentially looking for this functionality in Outlook. Are there native options and/or third party plug-ins which do this?

  Read the article

• Inbound SIP calls through Cisco 881 NAT hang up after a few seconds

  - by MasterRoot24

  I've recently moved to a Cisco 881 router for my WAN link. I was previously using a Cisco Linksys WAG320N as my modem/router/WiFi AP/NAT firewall. The WAG320N is now running in bridged mode, so it's simply acting as a modem with one of it's LAN ports connected to FE4 WAN on my Cisco 881. The Cisco 881 get's a DHCP provided IP from my ISP. My LAN is part of default Vlan 1 (192.168.1.0/24). General internet connectivity is working great, I've managed to setup static NAT rules for my HTTP/HTTPS/SMTP/etc. services which are running on my LAN. I don't know whether it's worth mentioning that I've opted to use NVI NAT (ip nat enable as opposed to the traditional ip nat outside/ip nat inside) setup. My reason for this is that NVI allows NAT loopback from my LAN to the WAN IP and back in to the necessary server on the LAN. I run an Asterisk 1.8 PBX on my LAN, which connects to a SIP provider on the internet. Both inbound and outbound calls through the old setup (WAG320N providing routing/NAT) worked fine. However, since moving to the Cisco 881, inbound calls drop after around 10 seconds, whereas outbound calls work fine. The following message is logged on my Asterisk PBX: [Dec 9 15:27:45] WARNING[27734]: chan_sip.c:3641 retrans_pkt: Retransmission timeout reached on transmission [email protected] for seqno 1 (Critical Response) -- See https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions Packet timed out after 6528ms with no response [Dec 9 15:27:45] WARNING[27734]: chan_sip.c:3670 retrans_pkt: Hanging up call [email protected] - no reply to our critical packet (see https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions). (I know that this is quite a common issue - I've spend the best part of 2 days solid on this, trawling Google.) I've done as I am told and checked https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions. Referring to the section "Other SIP requests" in the page linked above, I believe that the hangup to be caused by the ACK from my SIP provider not being passed back through NAT to Asterisk on my PBX. I tried to ascertain this by dumping the packets on my WAN interface on the 881. I managed to obtain a PCAP dump of packets in/out of my WAN interface. Here's an example of an ACK being reveived by the router from my provider: 689 21.219999 193.x.x.x 188.x.x.x SIP 502 Request: ACK sip:[email protected] | However a SIP trace on the Asterisk server show's that there are no ACK's received in response to the 200 OK from my PBX: http://pastebin.com/wwHpLPPz In the past, I have been strongly advised to disable any sort of SIP ALGs on routers and/or firewalls and the many posts regarding this issue on the internet seem to support this. However, I believe on Cisco IOS, the config command to disable SIP ALG is no ip nat service sip udp port 5060 however, this doesn't appear to help the situation. To confirm that config setting is set: Router1#show running-config | include sip no ip nat service sip udp port 5060 Another interesting twist: for a short period of time, I tried another provider. Luckily, my trial account with them is still available, so I reverted my Asterisk config back to the revision before I integrated with my current provider. I then dialled in to the DDI associated with the trial trunk and the call didn't get hung up and I didn't get the error above! To me, this points at the provider, however I know, like all providers do, will say "There's no issues with our SIP proxies - it's your firewall." I'm tempted to agree with this, as this issue was not apparent with the old WAG320N router when it was doing the NAT'ing. I'm sure you'll want to see my running-config too: ! ! Last configuration change at 15:55:07 UTC Sun Dec 9 2012 by xxx version 15.2 no service pad service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec localtime show-timezone service timestamps log datetime msec localtime show-timezone no service password-encryption service sequence-numbers ! hostname Router1 ! boot-start-marker boot-end-marker ! ! security authentication failure rate 10 log security passwords min-length 6 logging buffered 4096 logging console critical enable secret 4 xxx ! aaa new-model ! ! aaa authentication login local_auth local ! ! ! ! ! aaa session-id common ! memory-size iomem 10 ! crypto pki trustpoint TP-self-signed-xxx enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-xxx revocation-check none rsakeypair TP-self-signed-xxx ! ! crypto pki certificate chain TP-self-signed-xxx certificate self-signed 01 quit no ip source-route no ip gratuitous-arps ip auth-proxy max-login-attempts 5 ip admission max-login-attempts 5 ! ! ! ! ! no ip bootp server ip domain name dmz.merlin.local ip domain list dmz.merlin.local ip domain list merlin.local ip name-server x.x.x.x ip inspect audit-trail ip inspect udp idle-time 1800 ip inspect dns-timeout 7 ip inspect tcp idle-time 14400 ip inspect name autosec_inspect ftp timeout 3600 ip inspect name autosec_inspect http timeout 3600 ip inspect name autosec_inspect rcmd timeout 3600 ip inspect name autosec_inspect realaudio timeout 3600 ip inspect name autosec_inspect smtp timeout 3600 ip inspect name autosec_inspect tftp timeout 30 ip inspect name autosec_inspect udp timeout 15 ip inspect name autosec_inspect tcp timeout 3600 ip cef login block-for 3 attempts 3 within 3 no ipv6 cef ! ! multilink bundle-name authenticated license udi pid CISCO881-SEC-K9 sn ! ! username xxx privilege 15 secret 4 xxx username xxx secret 4 xxx ! ! ! ! ! ip ssh time-out 60 ! ! ! ! ! ! ! ! ! interface FastEthernet0 no ip address ! interface FastEthernet1 no ip address ! interface FastEthernet2 no ip address ! interface FastEthernet3 switchport access vlan 2 no ip address ! interface FastEthernet4 ip address dhcp no ip redirects no ip unreachables no ip proxy-arp ip nat enable duplex auto speed auto ! interface Vlan1 ip address 192.168.1.1 255.255.255.0 no ip redirects no ip unreachables no ip proxy-arp ip nat enable ! interface Vlan2 ip address 192.168.0.2 255.255.255.0 ! ip forward-protocol nd ip http server ip http access-class 1 ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ! ! no ip nat service sip udp port 5060 ip nat source list 1 interface FastEthernet4 overload ip nat source static tcp x.x.x.x 80 interface FastEthernet4 80 ip nat source static tcp x.x.x.x 443 interface FastEthernet4 443 ip nat source static tcp x.x.x.x 25 interface FastEthernet4 25 ip nat source static tcp x.x.x.x 587 interface FastEthernet4 587 ip nat source static tcp x.x.x.x 143 interface FastEthernet4 143 ip nat source static tcp x.x.x.x 993 interface FastEthernet4 993 ip nat source static tcp x.x.x.x 1723 interface FastEthernet4 1723 ! ! logging trap debugging logging facility local2 access-list 1 permit 192.168.1.0 0.0.0.255 access-list 1 permit 192.168.0.0 0.0.0.255 no cdp run ! ! ! ! control-plane ! ! banner motd Authorized Access only ! line con 0 login authentication local_auth length 0 transport output all line aux 0 exec-timeout 15 0 login authentication local_auth transport output all line vty 0 1 access-class 1 in logging synchronous login authentication local_auth length 0 transport preferred none transport input telnet transport output all line vty 2 4 access-class 1 in login authentication local_auth length 0 transport input ssh transport output all ! ! end ...and, if it's of any use, here's my Asterisk SIP config: [general] context=default ; Default context for calls allowoverlap=no ; Disable overlap dialing support. (Default is yes) udpbindaddr=0.0.0.0 ; IP address to bind UDP listen socket to (0.0.0.0 binds to all) ; Optionally add a port number, 192.168.1.1:5062 (default is port 5060) tcpenable=no ; Enable server for incoming TCP connections (default is no) tcpbindaddr=0.0.0.0 ; IP address for TCP server to bind to (0.0.0.0 binds to all interfaces) ; Optionally add a port number, 192.168.1.1:5062 (default is port 5060) srvlookup=yes ; Enable DNS SRV lookups on outbound calls ; Note: Asterisk only uses the first host ; in SRV records ; Disabling DNS SRV lookups disables the ; ability to place SIP calls based on domain ; names to some other SIP users on the Internet ; Specifying a port in a SIP peer definition or ; when dialing outbound calls will supress SRV ; lookups for that peer or call. directmedia=no ; Don't allow direct RTP media between extensions (doesn't work through NAT) externhost=<MY DYNDNS HOSTNAME> ; Our external hostname to resolve to IP and be used in NAT'ed packets localnet=192.168.1.0/24 ; Define our local network so we know which packets need NAT'ing qualify=yes ; Qualify peers by default dtmfmode=rfc2833 ; Set the default DTMF mode disallow=all ; Disallow all codecs by default allow=ulaw ; Allow G.711 u-law allow=alaw ; Allow G.711 a-law ; ---------------------- ; SIP Trunk Registration ; ---------------------- ; Orbtalk register => <MY SIP PROVIDER USER NAME>:[email protected]/<MY DDI> ; Main Orbtalk number ; ---------- ; Trunks ; ---------- [orbtalk] ; Main Orbtalk trunk type=peer insecure=invite host=sipgw3.orbtalk.co.uk nat=yes username=<MY SIP PROVIDER USER NAME> defaultuser=<MY SIP PROVIDER USER NAME> fromuser=<MY SIP PROVIDER USER NAME> secret=xxx context=inbound I really don't know where to go with this. If anyone can help me find out why these calls are being dropped off, I'd be grateful if you could chime in! Please let me know if any further info is required.

  Read the article

• How to configure Linux to open files by extension?

  - by Gregory MOUSSAT

  The various Linux's desktops open files according to their mime type. This is a very nice feature but I also need to open them by extension (as with Windows). For instance, I want to open every xxxxx.vnc files with a specific program when I double-click on them. I use xfce but I don't think it differs from Gnome or KDE because all of them use the same configuration files (defaults.list and mimeapps.list). If possible the settings are user specific, not system wide. I've found some very poor informations about that, and all are system wide, so may be wiped out by some updates.

  Read the article

• What Is the Keyboard Shortcut for Moving to Last Message in Mac OS X Mail.app?

  - by Philip Durbin

  I'm on Mac OS X 10.5.8 (Leopard). In Mail, I have the first message in my Inbox selected and I'm trying to navigate to the last message using my keyboard. In Thunderbird, I just hit the End key, which for me is "Function-right arrow" because I'm on a MacBook Pro. In Mail, with the first message selected, if I hit "Function-right arrow" (i.e. End), the scroll bar moves down, allowing me to see the messages at the bottom of the list, but the first message at the top of the list is still selected. What I want is for the last message to be selected. I've tried lots of key combinations and searched for the answer but haven't been able to find it. Please help. I posted this originally at discussions.apple.com but the only advice I received was to file a bug with Apple, which I did.

  Read the article

• How to Block a HTTP Website along with Its All Subdomain using IPTABLE

  - by netnovice

  I run a small HTTP web proxy site . We can not modify anything there in Proxy program. Few users mainly use Yahoo Web mail for Spamming and We need to block yahoo web mail access only ( complete yahoo website is also Ok) through our proxy . specially .mail.yahoo.com.. Like - we need to block URL like - http://uk-mg61.mail.yahoo.com http://in-mg61.mail.yahoo.com etc. etc. Note : We generaly open http://mail.yahoo.com in browser - but after loggin in it forwards it to Urls like above but all those are subdomain of mail.yahoo.com My target is if we can get all IP list for all available subdomain of mail.yahoo.com I can block it totally . We can only use IPTABLE ...I know using proxy itself we can check HTTP header and check Host field for .mail.yahoo.com. and block it. Solution : Follwoign what I did using IPtable . I collected IP CIDR block for yahoo mainly for yahoo web mail ( mail.yahoo.com ) as much as possible ( using linux host and whois command ) [ like 66.163.160.0/19 nd 98.136.0.0/14 etc ] and applied follwing command Like iptables -A OUTPUT -p tcp -d 66.163.160.0/19 -m state --state NEW -j DROP etc. Things are working fine. user can not access yahoo mail BUT the problem is I need to be updated with the avaialble CIDR YAHOO IP list ... I am ready to do it every week. I collected many from Net... You know theer are countles subdomain of mail.yahoo.com and seems every week Yahoo adding new IP... But what I observed some time user can bypass our rule and the reason obvously all the avaialble Ips are not entered in IPtable yet. What we need to do is enter all Ips of mail.yahoo.co But where do I find all subdomain for mail.yahoo.com I know we can get it from DNS but I must not be allowed to make DNS axfr query. Also doing reverse DNS will have performance issue. I want to know all subdomain of .mail.yahoo.c Can I get it from yahoo site. I have the list of all YAHOO smtp IP....but I need webmail Ip... ( http://public.yahoo.com/carloc/ymail.html ) Can you please share your Idea. Thank you

  Read the article

• How to copy text from Java program?

  - by Mohd. Ismail

  I am using one Java program called JDownloader v0.9.581 and want to copy full file and link list from main scrolling window. JDownloader is not having any way to save full list as text file. I am already trying all programs from Is there any way a user can view or copy non-editable GUI controls' contents at runtime? and Read the contents of a ComboBox (or any other windows control) and also many other programs from Google like GetWindowText. But nothing is allowing me to copy full text from a Java program like this. Someone is telling me - do printscreen and OCR - but that is not good way for me. How I can copy full text from JDownloader?

  Read the article

• What is the best memory supported by Asus Rampage Formula (1) motherboard

  - by James

  I'm rebuilding a PC from old components I have and I want to know what are the best ram sticks for the Asus Rampage Formula (The first motherboard in the Rampage Formula range) According to the Asus website (HERE) the maximum supported memory is 8GB but when I search through the memory compatibility list there's nothing above 2046mb and the motherboard only supports single or dual-channel memory. Can anyone point me in the direction of a more comprehensive list of compatible memory? Or does anyone know where I can ask about memory compatibility? Note: As far as I know, this model motherboard is no longer in production.

  Read the article

• Adaptec 5805 after reboot don't starting

  - by Rakedko ShotGuns

  After rebooting the system, the controller is not included. It only works if the computer is shut down and turn off. Late i update firmware "Adaptec RAID 5805 Firmware Build 18948" How to fix the problem? add Log Configuration summary Server name.....................raid_test Adaptec Storage Manager agent...7.31.00 (18856) Adaptec Storage Manager console.7.31.00 (18856) Number of controllers...........1 Operating system................Windows Configuration information for controller 1 ------------------------------------------------------- Type............................Controller Model...........................Adaptec 5805 Controller number...............1 Physical slot...................2 Installed memory size...........512 MB Serial number...................8C4510C6C9E Boot ROM........................5.2-0 (18948) Firmware........................5.2-0 (18948) Device driver...................5.2-0 (16119) Controller status...............Optimal Battery status..................Charging Battery temperature.............Normal Battery charge amount (%).......37 Estimated charge remaining......0 days, 16 hours, 12 minutes Background consistency check....Disabled Copy back.......................Disabled Controller temperature..........Normal (40C / 104F) Default logical drive task priorityHigh Performance mode................Dynamic Number of logical devices.......1 Number of hot-spare drives......0 Number of ready drives..........0 Number of drive(s) assigned to MaxCache cache0 Maximum drives allowed for MaxCache cache8 MaxCache Read Cache Pool Size...0 GB NCQ status......................Enabled Stay awake status...............Disabled Internal drive spinup limit.....0 External drive spinup limit.....0 Phy 0...........................No device attached Phy 1...........................No device attached Phy 2...........................No device attached Phy 3...........................1.50 Gb/s Phy 4...........................No device attached Phy 5...........................No device attached Phy 6...........................No device attached Phy 7...........................No device attached Statistics version..............2.0 SSD Cache size..................0 Pages on fetch list.............0 Fetch list candidates...........0 Candidate replacements..........0 69319...........................31293 Logical device..................0 Logical device name............. RAID level......................Simple volume Data space......................148,916 GB Date created....................09/19/2012 Interface type..................Serial ATA State...........................Optimal Read-cache mode.................Enabled Preferred MaxCache read cache settingEnabled Actual MaxCache read cache setting Disabled Write-cache mode................Enabled (write-back) Write-cache setting.............Enabled (write-back) Partitioned.....................Yes Protected by hot spare..........No Bootable........................Yes Bad stripes.....................No Power Status....................Disabled Power State.....................Active Reduce RPM timer................Never Power off timer.................Never Verify timer....................Never Segment 0.......................Present: controller 1, connector 0, device 0, S/N 9RX3KZMT Overall host IOs................99075 Overall MB......................4411203 DRAM cache hits.................71929 SSD cache hits..................0 Uncached IOs....................29239 Overall disk failures...........0 DRAM cache full hits............71929 DRAM cache fetch / flush wait...0 DRAM cache hybrid reads.........3476 DRAM cache flushes..............-- Read hits.......................0 Write hits......................0 Valid Pages.....................0 Updates on writes...............0 Invalidations by large writes...0 Invalidations by R/W balance....0 Invalidations by replacement....0 Invalidations by other..........0 Page Fetches....................0 0...............................0 73..............................10822 8...............................3 46138...........................4916 27184...........................15226 20875...........................323 16982...........................1771 1563............................5317 1948............................2969 Serial attached SCSI ----------------------- Type............................Disk drive Vendor..........................Unknown Model...........................ST3160815AS Serial Number...................9RX3KZMT Firmware level..................3.AAD Reported channel................0 Reported SCSI device ID.........0 Interface type..................Serial ATA Size............................149,05 GB Negotiated transfer speed.......1.50 Gb/s State...........................Optimal S.M.A.R.T. error................No Write-cache mode................Write back Hardware errors.................0 Medium errors...................0 Parity errors...................0 Link failures...................0 Aborted commands................0 S.M.A.R.T. warnings.............0 Solid-state disk (non-spinning).false MaxCache cache capable..........false MaxCache cache assigned.........false NCQ status......................Enabled Phy 0...........................1.50 Gb/s Power State.....................Full rpm Supported power states..........Full rpm, Powered off 0x01............................113 0x03............................98 0x04............................99 0x05............................100 0x07............................83 0x09............................75 0x0A............................100 0x0C............................99 0xBB............................100 0xBD............................100 0xBE............................61 0xC2............................39 0xC3............................69 0xC5............................100 0xC6............................100 0xC7............................200 0xC8............................100 0xCA............................100 Aborted commands................0 Link failures...................0 Medium errors...................0 Parity errors...................0 Hardware errors.................0 SMART errors....................0 End of the configuration information for controller 1 List item

  Read the article

• Strange rsync behaviour

  - by Stewie

  So, I start with comparing two directories: [root@135759 ]# rsync -av test1/ test2/ building file list ... done sent 128 bytes received 20 bytes 296.00 bytes/sec total size is 6 speedup is 0.04 They both are in sync Now, let me create a file in test1 and copy it to test2 [root@135759 ]# touch test1/hello4.php [root@135759 ]# scp test1/hello4.php test2/hello4.php I verify that those are same: [root@135759 test2]# md5sum test1/hello4.php d41d8cd98f00b204e9800998ecf8427e hello4.php [root@135759 test1]# md5sum test2/hello4.php d41d8cd98f00b204e9800998ecf8427e hello4.php Thus, running rsync will show me 0 files. Why is the output not right ? [root@135759 ]# rsync -avn test1/ test2/ building file list ... done hello4.php sent 116 bytes received 24 bytes 280.00 bytes/sec total size is 6 speedup is 0.04

  Read the article

• Problems accessing FileZilla FTP Server from static IP

  - by Kurru

  I'm trying to connect to my FTP server from my external IP address on Comcast Business. On the gateway I've set up port-forwarding on ports 20-21 to my server. Additionally I've forwarded ports 7000-8000 to my server for use in passive mode. In my FileZilla Server application I've set up passive mode to use my static IP and to use the subset of ports listed above. Unfortunately, it doesn't work through the external static IP for some reason, but I can internally. When I try to connect through static IP, the FileZila monitor says Connected, sending welcome message.... 220 FileZillaServer version 0.9.37 beta could not send reply, disconnected My firewall doesn't register any block events and windows firewall is disabled. What am I doing wrong or missing?

  Read the article

• CLI way of uninstalling a Windows update?

  - by radioact1ve

  Basically, what can be achieved by going to Control Panel Uninstall a Program View Installed Updates Right Click Uninstall, but through the command line? Looking for a way that works across the Windows platform but if (and according to my reading, most likely) it's version dependent so be it. Maybe something like: C:\command /uninstall "Security Update for Windows 7 for x64-based Systems (KB2705219)" Looks like using the KB would be great but wusa.exe works for the above example update but not for say "Security Update for Silverlight (KBXXXXXXXX)". Not much consistency. I'm really surprised there isn't much documentation on this. How does an app like WUInstall do it? Follow up question is how is that list of "View Installed Updates" populated? I've searched the registry like crazy hoping for an "UninstallString" or equivalent but only found references to the regular Add/Remove Programs list. Thought I would reference a StackOverflow question for another perspective.

  Read the article

• Issues importing PST into Archive Mailbox Exchange 2013

  - by atomicharri

  I've completed a successful mailbox import request into the archive mailbox for a particular user. There are no errors to speak of and the size of the archive mailbox has grown to the expected size after import (approximately 6GB). However, in OWA I can't see any of the mail folders inside the archive mailbox, only Deleted Items and RSS feeds folders. However if I run some cmdlets to list the contents of the Archive Mailbox\Inbox folder in the Exchange Shell, the full list of subfolders will come up. If I do a mail item search on the archive mailbox, emails from those individual folders appear as search results! I just can't see the folders in the navigation pane and hence cannot browse any of my old emails. Any help would be appreciated.

  Read the article

• Restricting permissions to individual documents on SharePoint

  - by wahle509

  Here's what I'm trying to do: I would like to create a list of documents on a site in my company's SharePoint site. Each document should have specific user's permissions to view and edit it. For example: The list is for performance reports. John has his out there called "John_PR_09.docx". Only him and his supervisor should have permissions to view, edit, or do anything to it. And then another employee has hers out there with permissions for only her and her supervisor, and so on... I have tested this out with a document that I removed the groups and users from (since they inherit permissions from it's parent) and only gave my user account permissions to. I then asked someone else to try and open and she could, she even wrote "TEST" on the document and saved it. What am I doing wrong? I thought I stopped it from inheriting permissions from it's parent and only gave myself rights to edit it.

  Read the article

• Apache SSL Log Incomplete SSL Handshake

  - by Raymond Berg

  Scenario: We're running some experiments in our classroom around trusted connections and SSL, and I want to demonstrate the SSL handshake request on a man-in-the-middle attack. I have an Apache server with a self-signed cert. Everything works fine, but the logging seems incomplete as there is no way to get a list of SSL attempts. Once the client accepts the 'exception', I get normal access log messages for every request. However, I need to know what ssl request caused it to fail. Here are my log directives: LogLevel warn ErrorLog logs/ssl_error_log CustomLog logs/ssl_access_log combined #the combined is your average custom log My desire is a list of every SSL handshake attempted. What am I missing that could produce something like the following? (Obviously the exact words aren't needed, but in the ballpark) 0/0/0 00:00:00 - 192.168.1.10 - hijk.lmnop.edu - SSL Mismatch

  Read the article

• My datacard goes online but doesn't gives internet access (Fedora 14).

  - by Harsh

  I am using MTS datacard. I have usb_modeswitch installed and have configured the wvdial.conf file. When I do sudo wvdial cdma, the IPs and DNS addresses are also allocated but I still cant access internet. The reply to dmesg | grep -e 'tty' -e 'modem' is: [ 0.000000] console [tty0] enabled [ 11.098238] USB Serial support registered for GSM modem (1-port) [ 11.098352] option 6-1:1.0: GSM modem (1-port) converter detected [ 11.102170] usb 6-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 11.102207] option 6-1:1.1: GSM modem (1-port) converter detected [ 11.102334] usb 6-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 11.102364] option 6-1:1.2: GSM modem (1-port) converter detected [ 11.102488] usb 6-1: GSM modem (1-port) converter now attached to ttyUSB2 [ 11.102522] option 6-1:1.3: GSM modem (1-port) converter detected [ 11.102643] usb 6-1: GSM modem (1-port) converter now attached to ttyUSB3 [ 11.102672] option 6-1:1.4: GSM modem (1-port) converter detected [ 11.102793] usb 6-1: GSM modem (1-port) converter now attached to ttyUSB4 [ 11.103074] option: v0.7.2:USB Driver for GSM modems Can anyone tell me what shall I do?

  Read the article

• Top ten security tips for non-technical users

  - by Justin

  I'm giving a presentation later this week to the staff at the company where I work. The goal of the presentation is to serve as a refresher/remidner of good practices that can help keep our network secure. The audience is made up of both programmers and non-technical staff, so the presentation is geared for non-technical users. I want part of this presentation to be a top list of "tips". The list needs to be short (to encourage memory) and be specific and relevant to the user. I have the following five items so far: Never open an attachment you didn't expect Only download software from a trusted source, like download.com Do not distribute passwords when requested via phone or email Be wary of social engineering Do not store sensitive data on an FTP server Some clarifications: This is for our work network These need to be "best practices" tips for the end-user, not IT policy We have backups, OS patches, firewall, AV, etc, all centrally managed This is for a small business (less than 25 people) I have two questions: Do you suggest any additional items? Do you suggest any changes to existing items?

  Read the article

• Excel help vlookup

  - by user123953

  I need a little help with some excel Employee Locations Hours OT Mr.One Station 1 40 6 Mrs.Seven Station 2 30 6 Mr.Two Station 3 30 4 Mr.Three Station 4 40 4 Mrs.Eight Station 1 32 6 Mr.Four Station 2 32 7 Mrs.Nine Station 3 40 6 Mr.Five Station 4 40 7 Mr.Six Station 1 25 2 Mrs.Ten Station 2 40 3 Mr.Eleven Station 3 60 1 I have spreadsheet with to worksheets one is the data sheet (shown above) on the other sheet is a summary, that has the Locations column as data validation list. I wanna use the data validation list to pull all the people and info from a specific location. I tried using a vlookup put I only know how to use to pull one person at a time not a group of specific to a location.

  Read the article

• Wife's Email going into Junk Mail folder in Outlook despite turning off Junk Mail

  - by Adam V

  I recently started a new job. Today I tried emailing my wife from my new company email account. When she responded, her email went into the "Junk E-mail" folder. So I tried a few things: Added her to the "Safe Senders" list Added her as an Outlook contact and checked the "Also trust email from my Contacts" box in the "Safe Senders" tab Added her domain to the "Safe Senders" list Switched from "Low" to "No Automatic Filtering" in the Junk Email options No matter what I would do, her emails would still go into the Junk Email folder. Can anyone recommend additional things to try? EDIT: This is using Exchange.

  Read the article

• Apache Passenger can't find gem

  - by purpletonic

  I'm running Ubuntu 10.04 and I've transferred over some sites built in Sinatra. I've set up Phusion passenger, but when I visit the sites I'm getting a Passenger LoadError claiming that passenger has 'no such file to load -- sinatra' yet when I run gem list or sudo gem list, I clearly see sinatra listed. Why can't passenger find this gem? My sudo gem env output looks like this RubyGems Environment: - RUBYGEMS VERSION: 1.3.5 - RUBY VERSION: 1.8.7 (2009-12-24 patchlevel 248) [x86_64-linux] - INSTALLATION DIRECTORY: /usr/local/lib/ruby/gems/1.8 - RUBY EXECUTABLE: /usr/local/bin/ruby - EXECUTABLE DIRECTORY: /usr/local/bin - RUBYGEMS PLATFORMS: - ruby - x86_64-linux - GEM PATHS: - /usr/local/lib/ruby/gems/1.8 - /root/.gem/ruby/1.8 - GEM CONFIGURATION: - :update_sources = true - :verbose = true - :benchmark = false - :backtrace = false - :bulk_threshold = 1000 - REMOTE SOURCES: - http://gems.rubyforge.org/ running 'sudo ruby -v' I see the following: ruby 1.8.7 (2009-12-24 patchlevel 248) [x86_64-linux], MBARI 0x6770, Ruby Enterprise Edition 2010.01 Is that correct, or should the two ruby versions match up correctly, displaying REE in both? Thanks in advance!

  Read the article

< Previous Page | 429 430 431 432 433 434 435 436 437 438 439 440  | Next Page >