Search Results

Search found 14593 results on 584 pages for 'pat inside'.

Page 438/584 | < Previous Page | 434 435 436 437 438 439 440 441 442 443 444 445  | Next Page >

• Western Digitial My Book: Can't access the data on the drive

  - by Bryan Denny

  My girlfriend has this external hard drive by Western Digital called a My Book. When the external drive is connected, it does not show it as an accessible disk drive on the computer. However, it shows up fine in Device Manager: I can also see it in Disk Management, but the volume is not mapped to a drive letter, nor can I change the drive letter: It only gives me access to Delete Volume: I would rather not lose the data on the drive if possible. What can I do from here to get to the data? Things I've tried/know: Uninstall drivers and re-install them Device does the same thing when attach to either her Win7 laptop or my Win8 laptop I don't think there's an issue with the HDD itself. No clicking noises, etc. I ran Western Digital Data LifeGuard Diangostics (DLGDIAG) and the SMART Status was a "PASS", all of the SMART Disk Information looked fine. I haven't had the time to run the diag tests yet but I do not believe it's a mechanical issue. The hard drive is inside of an enclosure, I have not attempted to pry the drive out yet. How can I get Windows to properly detect this drive?

  Read the article

• DNS issue for internal website routing internet connection from remote location

  - by Michael Paul

  I have an issue that I could use some help with. Our company has a main location and a remote location. Previously, the remote location was connected to the main location through an internet connection VPN tunnel. The connection was pitifully slow at 1.5Mbps, so we upgraded it with a 75Mbps direct link. That meant the remote location lost it's internet access, so we routed their access through the main office internet connection. Everything works perfect except for one thing. The website we host is not accessible from the remote location unless the IP address is used. If I do NSLOOKUP on our website address from a machine connected to the main location network, it resolves correctly to the inside IP address. However, if I do the same from a remote location machine, it resolves to the website's outside IP address. Our internal DNS server(s) have a pointer and CNAME records set up, and everything was working perfectly before the connection was upgraded. In addition, the remote location has a domain controller, DNS server and DHCP server to service these requests at the remote location and prevent these requests from getting routed back and forth over the link. So I think was it happening is that for some reason the DNS server at the remote location is not resolving our website name correctly and passing the requests on to the routers, which then push the request out to the internet DNS system. That resolves the name to our external IP. This is purely a DNS issue, everything else works just fine. I am just stumped on this one. Any ideas on how to fix this? Edit: I forgot to mention that at the remote side of the link is a Cisco ASA-5505 and at the main office there is a Cisco ASA-5510. The link is connected between these 2 devices and the routing is handled in the 5510. Thanks, Michael

  Read the article

• Local DNS and Apache Server Configuration Interferring - example.com / www.example.com

  - by nicorellius

  I have a domain for my site: example.com I am also running local DNS with these lines: www IN CNAME server.<host_provider>.com. dev IN CNAME server.<host_provider>.com. So www.example.com and dev.example.com go to production and development sites, respectively, that are hosted by a host company. In my Apache configuration for the main site, I'm running a rewrite rule like this: RewriteEngine ON RewriteCond %{HTTP_HOST} ^example\.com$|!dev\.example\.com$ [NC] RewriteRule ^(.*)$ http://www\.%{HTTP_HOST}/$1 [R=302,L,NE] This rule seems to work, as when you are off the network and go to example.com in the browser, you get redirected to www.example.com. The problem is when I'm on the network, and I go to example.com I get an error page, saying page can't be found. No server errors; just a page can't be found, as if the local DNS is causing it to stop looking at that point. I'm also using Nettica for DNS service and have this A record in place: example.com Host (A) Default xxx.xx.xxx.xx This handles the external DNS, but my problem seems to be related to my internal DNS. For example, inside my network, I can go to servers on the network with addresses like this: server.example.com server1.example.com server2.example.com These are configured in my local DNS. I'm just not sure how to get past the "empty" subdomain and go to example.com. Adding to this since it might not be clear. If I'm out side the example.com network, on another network, like example123.com, then when I go to example.com I'm redirected to www.example.com as expected, eg, the Apache rewrite rule is working. Thanks in advance for any information.

  Read the article

• Cannot Connect To VMWare Guest OS Using Either RDP or VNC

  - by Humanier

  Hi, I have a PC (Windows XP SP3) with VMWare Workstation 7 installed. The VMWare hosts Windows Server 2003 Enterprise Edition R2. RealVNC (4.1.3) is installed on both OS'es. Both of them use Hamachi2. Host OS (WinXP) also runs ZoneAlarm Firewall. Hamachi network is set as trusted. My goal is to allow RDP and VNC connections to be made to the guest OS (Windows Server 2003). Both options work absolutely fine if I connect from the host OS. However I have problems when other computers from our Hamachi network try to connect the guest OS (Win2K3). 1) RDP connections. RDP window opens, shows black content and after 15-20 seconds displays following error: http://lh6.ggpht.com/_yQhsRRimgKU/TArRrtiteQI/AAAAAAAABZA/e96za-y9wzo/rdp_error.JPG 2) RealVCN connections. Users are able to connect but all they see is a black screen inside VNC window. At the same their input (keystrokes or mouse moves/clicks) are visible when looking at the console window of the Win2K3. I really appreciate any ideas on how to resolve mentioned problems. Thank you in advance.

  Read the article

• Cannot Connect To VMWare Guest OS Using Either RDP or VNC

  - by Humanier

  Hi, I have a PC (Windows XP SP3) with VMWare Workstation 7 installed. The VMWare hosts Windows Server 2003 Enterprise Edition R2. RealVNC (4.1.3) is installed on both OS'es. Both of them use Hamachi2. Host OS (WinXP) also runs ZoneAlarm Firewall. Hamachi network is set as trusted. My goal is to allow RDP and VNC connections to be made to the guest OS (Windows Server 2003). Both options work absolutely fine if I connect from the host OS. However I have problems when other computers from our Hamachi network try to connect the guest OS (Win2K3). 1) RDP connections. RDP window opens, shows black content and after 15-20 seconds displays following error: http://lh6.ggpht.com/_yQhsRRimgKU/TArRrtiteQI/AAAAAAAABZA/e96za-y9wzo/rdp_error.JPG 2) RealVCN connections. Users are able to connect but all they see is a black screen inside VNC window. At the same their input (keystrokes or mouse moves/clicks) are visible when looking at the console window of the Win2K3. I really appreciate any ideas on how to resolve mentioned problems. Thank you in advance.

  Read the article

• Getting old bluetooth headset out of standby on Windows 7

  - by luagh45

  I think this is the problem, and if not, I'm open to suggestions. I have an old Jabra BT200 that I used to use on my phone. When a phone call was coming in it would beep using its own noises (meaning the phone never rang inside the headset) and then I could push the 'answer/hang up' button and sound and mic would start working. I have now paired it with Windows 7, and it looks good. Under the playback menu I have 'Bluetooth Hands free Audio / Jabra BT200 (Mono Audio) / Ready', and under the recording menu I have 'Bluetooth Audio Input Device / Jabra BT200 (Mono Audio) / Ready'. However when I try to test the speakers Windows sends a sound, but I never hear it, and when I talk in the mic, Windows never hears me. If I right click either the Bluetooth mic or speakers there's an option to 'Connect', but it's grayed out and I cannot click it. As the final piece of knowledge I have, my headset blinks once every 3 seconds when it's in standby and I can't get that to change. If everything was working it should blink once every second at which point I think all of my problems would be fixed. Hence my issue: I can't seem to get my headset out of standby. On my headset I've tried sending it test noises and then pressing the 'Answer' button, but still nothing. The headset beeps when I press it, so it works, it just doesn't ever come out of standby. Is there maybe some way to trick my headset into thinking it's getting a phone call from my computer?

  Read the article

• Adobe Acrobat Reader don't zoom out the page enough in "one page" mode

  - by mbaitoff

  I'm using Adobe Acrobat Reader version 9.4 under Debian Lenny. I'm experiencing a problem: when I push the "Show one page at a time" button, I expect the page to zoom such that pressing PgUp/PgDn would turn to the next/previous page. However, the zoom seems to be not enough - very thin bottom portion of the page doesn't fit inside the reader window, and pressing PgUp/PgDn gives the jitter of the same page, and I have to push twice to get to the next page. It is even worse in continuous page mode - a roll of pages begin to be non-synced with window boundaries, ending up with page break right in the middle of the view after several turns of the pages. This behaviour doesn't occur on windows version - I have a page properly zoomed in single/continuous modes, so that turning the pages is performed as page-at-once, as intended. How to make the Acrobat Reader fit the page to window properly? Thats how it looks before pressing PgDn (notice the bottom edge of the "paper" hidden beneath the bottom window edge): Thats how it looks after pressing PgDn (notice the "paper" bottom edge emerged from beneath the window edge, while the "paper" upper edge hides behind the upper window edge, showing that the document window size is not enough to contain the whole page):

  Read the article

• Linux/Unix in Windows

  - by Dmitriy Nagirnyak

  Hi, What would be the best way to get the full-blown Unix/Linux bash inside Windows? I don't mean the Virtual Machine, but rather only the terminal with mounted NTFS drives. This way I could use the power of Unix/Linux still being on Windows. The things I want to be able to do from the terminal: Package management (apt-get in Debian). SSH. File operations (including grub and similar). Run a web server (Apache, nginx) for testing purposes. Easy to use: start terminal - Linux is on, end terminal - Linux is shut down. Would be nice to be able to copy-paste from Windows into Terminal and vice versa. This really feels like a separate OS and I realize that VM would, probably, be the best thing. But I guess it should be possible to have a lighter installation. THE NOTE: I cannot just use Linux because of I still need to do development on Windows. Also I am a Linux noobie - just getting started with it so sorry if asking something obvious/stupid. Thanks, Dmitriy.

  Read the article

• No internet access when using static IP

  - by Endy Tjahjono

  I have just upgraded to Windows 8.1, and after the upgrade process is finished, I can't connect to internet. I tried running the "Troubleshoot problems": It concluded that DHCP needs to be activated: I let it activate DHCP, and I got internet connection back. The problem is I want to set this PC to a certain IP address (the IP address that it has been using all this time). I am also using Hyper-V, which I suspect has something to do with this problem. After I regained internet connection, I tried running one of my Hyper-V VM. From inside the VM I can connect to internet. That VM has static IP address. I also noticed that in "Control Panel\Network and Internet\Network Connections", I usually have a network connection called vEthernet (Realtek PCIe GBE Family Controller Virtual Switch). I didn't find it there after upgrade. How do I set my PC to a static IP while retaining internet access in Windows 8.1? EDIT I have managed to recreate vEthernet (Realtek PCIe GBE Family Controller Virtual Switch) by unchecking Allow management operating system to share this network adapter in Hyper-V's Virtual Switch Manager and then checking it again. But when I changed the adapter to use static IP, it still can't connect to internet. Result of Get-NetAdapter -Name * | fl (with MAC address removed): Name : vEthernet (Realtek PCIe GBE Family Controller Virtual Switch) InterfaceDescription : Hyper-V Virtual Ethernet Adapter #2 InterfaceIndex : 5 MacAddress : 55-55-55-55-55-55 MediaType : 802.3 PhysicalMediaType : Unspecified InterfaceOperationalStatus : Up AdminStatus : Up LinkSpeed(Mbps) : 100 MediaConnectionState : Connected ConnectorPresent : False DriverInformation : Driver Date 2006-06-21 Version 6.3.9600.16384 NDIS 6.40 Name : Ethernet 3 InterfaceDescription : Hyper-V Virtual Ethernet Adapter #3 InterfaceIndex : 6 MacAddress : 55-55-55-55-55-56 MediaType : 802.3 PhysicalMediaType : Unspecified InterfaceOperationalStatus : Up AdminStatus : Up LinkSpeed(Gbps) : 10 MediaConnectionState : Connected ConnectorPresent : False DriverInformation : Driver Date 2006-06-21 Version 6.3.9600.16384 NDIS 6.40 Name : Ethernet InterfaceDescription : Realtek PCIe GBE Family Controller InterfaceIndex : 2 MacAddress : 55-55-55-55-55-57 MediaType : 802.3 PhysicalMediaType : 802.3 InterfaceOperationalStatus : Up AdminStatus : Up LinkSpeed(Mbps) : 100 MediaConnectionState : Connected ConnectorPresent : True DriverInformation : Driver Date 2013-05-10 Version 8.1.510.2013 NDIS 6.30

  Read the article

• Need Corrected htaccess File

  - by Vince Kronlein

  I'm attempting to use a wordpress plugin called WP Fast Cache which creates static html files from all your posts, pages and categories. It creates the following directory structure inside wp-content: wp_fast_cache example.com pagename index.html categoryname postname index.html basically just a nested directory structure and a final index.html for each item. But the htaccess edits it makes are crazy. #start_wp_fast_cache - do not remove this comment <IfModule mod_rewrite.c> RewriteEngine On RewriteCond %{REQUEST_METHOD} ^(GET) RewriteCond /home/user/public_html/wp-content/wp_fast_cache/%{HTTP_HOST}%{REQUEST_URI}x__query__x%{QUERY_STRING}index.html -f RewriteCond %{HTTP_USER_AGENT} !(iPhone|Windows\sCE|BlackBerry|NetFront|Opera\sMini|Palm\sOS|Blazer|Elaine|^WAP.*$|Plucker|AvantGo|Nokia) RewriteCond %{HTTP_COOKIE} !(wordpress_logged_in) [NC] RewriteRule ^(.*)$ /home/user/public_html/wp-content/wp_fast_cache/%{HTTP_HOST}%{REQUEST_URI}x__query__x%{QUERY_STRING}index.html [L] RewriteCond %{REQUEST_METHOD} ^(GET) RewriteCond %{QUERY_STRING} ^$ RewriteCond /home/user/public_html/wp-content/wp_fast_cache/%{HTTP_HOST}%{REQUEST_URI}index.html -f RewriteCond %{HTTP_USER_AGENT} !(iPhone|Windows\sCE|BlackBerry|NetFront|Opera\sMini|Palm\sOS|Blazer|Elaine|^WAP.*$|Plucker|AvantGo|Nokia) RewriteCond %{HTTP_COOKIE} !(wordpress_logged_in) [NC] RewriteRule ^(.*)$ /home/user/public_html/wp-content/wp_fast_cache/%{HTTP_HOST}%{REQUEST_URI}index.html [L] </IfModule> #end_wp_fast_cache No matter how I try and work this out I get a 404 not found. And not the Wordpress 404, and janky apache 404. I need to find the correct syntax to route all requests that don't exist ie: files or directories to: wp-content/wp_fast_cache/hostname/request_uri/ So for example: Page: example.com/about-us/ => wp-content/wp_page_cache/example.com/about-us/index.html Post: example.com/my-category/my-awesome-post/ => wp-content/wp_fast_cache/example.com/my-category/my-awesome-post/index.html Category: example.com/news/ => wp-content/wp_fast_cache/example.com/news/index.html Any help is appreciated.

  Read the article

• Why am I unable to reach local network computers, but able to browse the web?

  - by Igor Zinov'yev

  I have a weird problem. Today after turning my Ubuntu 9.10 PC on I can't connect to my local network, but I can use the Internet. We have a single Windows 2003 server machine that acts as a local main DNS server, DHCP server and a domain controller. Although it seems to give me the local IP address, I can not ping it, as well as any other machine on the net. I have tried all of the below and it didn't help: Rebooting; Reconnecting to the network; Forcing the dhclient to renew the IP address; Deleting and creating new connection profiles; Plugging my machine into another network outlet; Maybe it has something to do with routing, because I have tampered with routing tables the day before, but the tables seem ok to me: $ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.0.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 vboxnet0 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 Our LAN uses a D-Link DI-604 router, and it looks to me as if I am connected to the network outside the router. I can not even access its administration page. Please at least suggest what I can do to solve this. P.S. What seems strangest to me is that I can access the PC in question from outside the network by opening a port on the router. I have managed to ssh to it from outside, but I still can't ping nothing on the inside. P.P.S Today I tried reinstalling network-manager with --purge option, but it did no good. After that I created a new DCHP reservation for my PC in order to change my local IP, but that didn't change anything either. My PC is able to get a DHCP offer, but then it's unable to connect to any local computers. I am desperate.

  Read the article

• Remote search system for samba shares

  - by fostandy

  I have several shares residing on a samba server in a small business environment that I would like to provide search facilities for. Ideally this would be something like google desktop with some extra features (see below), but lacking this the idea is to take what I can get, or at least get an idea for what is out there. Using google desktop search as a reference model, the principle additional requirement is that it is usable from clients over the network. In addition there are some other notes (note that none of these are hard requirements) The content is always files, residing on a single server, accessible from samba shares. Standard ms office document fare Also a lot of rars and zips which it is necessary to search inside. Permissions support, allowing for user-based control to reflect current permission access in samba shares. The userbase will remain fairly static, so manual management of users is fine. majority of users will be Windows based I know there are plenty of search indexers out there: beagle and tracker seem to be the most popular. Most do not seem to offer access control and web-based/remote search does not seem to be high priority. I've also seen a recent post on the samba mailing list asking for pretty much the exact same thing. (They mention a product called IBM OmniFind Yahoo! Edition and while their initial reception seems positive, I am pretty skeptical. RHEL 4? Firefox 2? Updated much?) edit: similar question here What else is out there? Are you in a similar situation? What do you use?

  Read the article

• Setup 2003 R2 Radius server to work on vista/seven

  - by Fox

  Hi All, I'm currently trying to configure my 2003 R2 server RADIUS module to enable WIFI client to authenticate throught my Active Directory. The RADIUS server use MS-CHAP V2 as encryption method. I got several Access Point running DD-WRT, configured to use WPA2-Enterprise security that use Radius Server. Everything is setup, and almost working. When I say almost working, I mean, I can login using my AD Credential on my IPod or even on a MacBook running OS X, Windows XP also work with some little tweak in connection properties. The problem is Windows Vista or Windows Seven clients computers that are not inside domain. It doesn't work at all, it doesn't even prompt for user/password/domain. I already install the patch for IAS to make the certsrv compatible with Vista and Seven, but still doesn't work. Anyone ever encounter the same issue I have right now? I'm searching for a solution to this for several already and still not find anything. Looks like many people have the same issue too. Thanks all for you eventual answers.

  Read the article

• Network problems with Ubuntu on VMware

  - by svick

  I'm running Ubuntu 10.04 inside VMware Player running under Windows Vista and I can't connect to the internet or the host computer from the Ubuntu. I have set all the VMware services to “manual” (like VMware DHCP Service), but starting them manually doesn't help. In VMware, the network seems to work (there is a green dot beside the network icon) and I have tried both Bridged and NAT settings. ifconfig doesn't show the eth1 interface, unless I give it as a parameter (or use -a). I think this means that Ubuntu thinks that the network isn't connected at all. How do I fix this? ifconvadmin@ubu1004:~$ ifconfig lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:56 errors:0 dropped:0 overruns:0 frame:0 TX packets:56 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:4192 (4.1 KB) TX bytes:4192 (4.1 KB) vadmin@ubu1004:~$ ifconfig eth1 eth1 Link encap:Ethernet HWaddr 00:0c:29:2d:a0:6f BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:18 Base address:0x2000

  Read the article

• Internal/External Moodle - DNS

  - by Chief17

  Network diagram: I have a moodle (a VLE) setup that I want to be internally and externally accessible. The green route on the diagram below is the route I would like the traffic to take when the user is inside the LAN, and the red route is seemingly what it does take. The website has a domain name (like most websites do). From the User PC, if I ping the domain name, I get the internal IP of the webserver (because of a hosts file entry), if I nslookup the domain name I also get the internal IP of the webserver (because of an A record on my DNS server). Running the same two commands on the webserver gives me the webservers external IP. (going well so far) If I use PHPs gethostbyname() on the moodle website and use domain name as a parameter (getting php/apache to resolve the hostname) it returns the exernal IP of the webserver (good news, DNS seems to be doing what I want it to). All things so far seem to be going well. The only thing that is confusing me and preventing the moodle single sign on from working is the fact that if I get moodle to show my IP address, it says that it is an external one (outside my NATting firewall) when it should show an internal IP. This is the issue, any ideas on how to go about resolving this? Any ideas on tests I can perform (I have also tried a tracert and the request goes directly to the webserver), anything? Thanks all!

  Read the article

• Rewriting html links with modproxyperlhtml

  - by Juancho

  I'm trying to setup an Apache reverse proxy using mod_proxy and modproxyperlhtml. This is my scenario: Domain for the proxy: http : // www.myserver.com/ Destination server (the one behind the proxy): http : // myserver.foo.com/myapp/ I'm sorry that I have to space the URL but serverfault doesn't allow me to post more than two links as "spam protection mechanism" (ridiculous on a site where you ask questions about servers and it's really probable to post more than two times the same URL's to explain your question). The idea is to map http : // www.myserver.com/ to http : // myserver.foo.com/myapp/ . Note that the path on the proxy is / and on the destination server is /myapp/. All of the examples I can find on the net (like the one on the official documentation of modproxyperlhtml) are the other way around, ie. path on the proxy /myapp/ and path on the destination server /. This is my current config that doesn't work: ProxyPass / http : // myserver.foo.com/myapp/ ProxyPassReverse / http : // myserver.foo.com/myapp/ PerlInputFilterHandler Apache2::ModProxyPerlHtml PerlOutputFilterHandler Apache2::ModProxyPerlHtml SetHandler perl-script PerlSetVar ProxyHTMLVerbose "On" LogLevel Info <Location / > # ProxyPassReverse /myapp/ PerlAddVar ProxyHTMLURLMap "/myapp/ /" PerlAddVar ProxyHTMLURLMap "http : // myserver.foo.com /" </Location> The examples use the ProxyPassReverse inside the Location directive, but on my case doesn't work, only when outside. With this configuration the links aren't being replaced as they should be, my guess is that the location isn't being found, thus the rewrite rules aren't being applied. The error log only shows that it uncompresses the content, searches it but doesn't find anything: [Tue Nov 13 0842:05 2012] [warn] [ModProxyPerlHtml] Uncompressing text/html; charset=UTF-8, Content-Encoding: gzip\n [Tue Nov 13 08:42:05 2012] [warn] [ModProxyPerlHtml] Content-type 'text/html; charset=UTF-8' match: /(text\\/javascript|text\\/html|text\\/css|text\\/xml|application\\/.*javascript|application\\/.*xml)/is\n [Tue Nov 13 08:42:05 2012] [warn] [ModProxyPerlHtml] Compressing output as Content-Encoding: gzip\n [Tue Nov 13 08:42:06 2012] [warn] [ModProxyPerlHtml] Content-type 'text/html; charset=UTF-8' match: /(text\\/javascript|text\\/html|text\\/css|text\\/xml|application\\/.*javascript|application\\/.*xml)/is\n What could be wrong ?

  Read the article

• Libraries merged folder views

  - by Stigma

  So I pretty much love the Windows 7 Libraries feature, and saw one use for them that I thought would be perfect, but I can't seem to manage it. Basically, a merged view of different folder structures. Suppose I make a new generic library and add three locations to it: C:\Test\, D:\Test\ and D:\temp\Test\. Now, these may look somewhat okay as long as there are no duplicates in these folders. (It wants to group them based on the included directory, which one can work around by looking on google - I don't have the precise trick on hand I am afraid.) But when you get collisions and, say, two of those directories have a Sub directory in them, stuff becomes unusable (assuming Arrange by: Folder view). You'll have multiple folders listed named Sub, which is pretty useless when looking for data. I want folders to get 'merged', which ought to be possible somehow since it can create these merged views based on artist, album etc in other views. So all subdirectories that are double (and recursively checking for doubles inside those, etc) ought to be merged for as far the View is concerned. If files have a collision, I don't really care what happens - hide one, show both, filter out duplicates, whatever. (Although an option would be nice...) Anyhow, is there anyone who knows how to get such a 'merged folder structure' functionality for Libraries? It would be really useful for me.

  Read the article

• how to define service runlevel order position?

  - by DmitrySemenov

  I setup bind-dlz and need mysql start prior NAMED when system starts here is what I have [root@semenov]# ./test.sh mysql 0:off 1:off 2:on 3:on 4:on 5:on 6:off named 0:off 1:off 2:off 3:on 4:on 5:on 6:off lrwxrwxrwx. 1 root root 15 Apr 15 18:57 /etc/rc3.d/S93mysql -> ../init.d/mysql lrwxrwxrwx. 1 root root 15 Apr 15 18:57 /etc/rc3.d/S90named -> ../init.d/named here is what I have in mysql init script # Comments to support chkconfig on RedHat Linux # chkconfig: 2345 84 16 # description: A very fast and reliable SQL database engine. # Comments to support LSB init script conventions ### BEGIN INIT INFO # Provides: mysql # Required-Start: $local_fs $network $remote_fs # Should-Start: ypbind nscd ldap ntpd xntpd # Required-Stop: $local_fs $network $remote_fs # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: start and stop MySQL # Description: MySQL is a very fast and reliable SQL database engine. ### END INIT INFO so when I remove named from chkconfig and have there just mysql, it starts with order number 84: /etc/rc3.d/S84mysql - ../init.d/mysql but when I add named inside chkconfig it's order changes to 93: /etc/rc3.d/S93mysql - ../init.d/mysql as a result mysql will be starting after named and named will fail (no sql available) any ideas what I'm doing wrong? here is what I have in named init script # chkconfig: 345 90 16 # description: named (BIND) is a Domain Name Server (DNS) \ # that is used to resolve host names to IP addresses. # probe: true ### BEGIN INIT INFO # Provides: $named # Required-Start: $local_fs $network $syslog # Required-Stop: $local_fs $network $syslog # Default-Start:2 3 4 # Default-Stop: 0 1 2 3 4 5 6 # Short-Description: start|stop|status|restart|try-restart|reload|force-reload DNS server # Description: control ISC BIND implementation of DNS server ### END INIT INFO thanks, Dmitry

  Read the article

• How can I override mod-php5's .php mapping to php4-cgi per VirtualHost or Directory?

  - by geocoo

  I am running Debian Linux with apache2 and libapache2-mod-php5 5.3.3-7. I have one VirtualHost which requires php4. So I researched and compiled php4-cgi. However, I cannot seem to: Override mod-php5's mapping of .php in that vhost (or even globally, without disabling php completley). Even find where that mapping is made, in hope of disabling it and enabling mod-php5 or php4-cgi per vhost. This is my php4-cgi mapping (Inside the one php4 vhost): ScriptAlias /php4 /usr/local/php4/bin <Directory /usr/local/php4/bin> Options +ExecCGI +FollowSymLinks </Directory> <Directory /www/test> AddHandler php4-cgi-script .php Action php4-cgi-script /php4/php Options +ExecCGI </Directory> This does not work, mod-php5 still runs all .php files in that vhost/directory. If I change the file extension in the AddHandler above from .php to .php4, then .php4 files do run php4-cgi as expected, but I can't change all the files in the app to .php4. I thought maybe I could disable the mod-php5's mapping in my vhost or directory, then do my cgi-config (as above) but many combinations of these in different contexts did not work: RemoveHandler .php RemoveType .php php_flag engine off (this seems to even disable my php4-cgi so that wont work) The only other place I can find any mapping is in /etc/mime.types, but commenting out the relevant lines and restarting apache2 does not affect mod-php5's .php mapping. I have searched as much as I can, it is now a mystery to me. Any help or direction would be greatly appreciated.

  Read the article

• How to make new file permission inherit from the parent directory?

  - by Wai Yip Tung

  I have a directory called data. Then I am running a script under the user id 'robot'. robot writes to the data directory and update files inside. The idea is data is open for both me and robot to update. So I setup the permission and owner group like this drwxrwxr-x 2 me robot-grp 4096 Jun 11 20:50 data where both me and robot belongs to the 'robot-grp'. I change the permission and the owner group recursively like the parent directory. I regularly upload new files into the data directory using rsync. Unfortunately, new files uploaded does not inherit the parent directory's permission as I hope. Instead it looks like this -rw-r--r-- 1 me users 6 Jun 11 20:50 new-file.txt When robot tries to update new-file.txt, it fails due to lack of file permission. I'm not sure if setting umask helps. In anycase the new files does not really follow it. $ umask -S u=rwx,g=rx,o=rx I'm often confounded by Unix file permission. Do I even have a right plan? I'm using Debian lenny.

  Read the article

• Magnetic Stripe Reader over Terminal Server has random Uppercase/Lowercase nonsense

  - by Peter Turner

  The Magnetic Stripe Reader that I'm using and testing is just supposed to be sending keystrokes. Unfortunately, it seems to randomly be sending upper case and lower case keystrokes, sometimes substituting % for 5 and ^ for 6 and vice versa. (If you've ever programmed for a magnetic strip reader, you know that's not a good thing.) Is there something in the RDP protocol that causes this? I've got kind of a convoluted system, running XP inside virtualbox on Fedora 11 RDP'ed into a win2k3 server. It works on the XP VM and it doesn't work on the RDP'ed one. What's weirder, is that I'm not even emulating the USB drivers for my Mag Card Reader. Linux is sending keystrokes straight in to windows, and MSTSC on windows XP is sending crap to the Win2k3 server. I'm 99% certain this isn't a problem with the card reader, it has nothing to do with my programming either. (I get the same junk coming into notepad that I get coming into our software [that's why I didn't ask on SO]). And, it works with rdesktop programs other than MSTSC.exe! Needless to say, I'm in need of some RDP Guruship.

  Read the article

• Sharp mx2600 driver cannot see all the paper trays

  - by Frank R

  I am wondering if someone might have experienced this problem and have a solution. I have just taken over a network about a month ago so it is hard to know what truly worked and didn't work. However the end users reported that they used to be able to choose the tray they wanted to print from in the printer preferences in the driver for the Sharp MX2600n device then send the print job. Now they only have two trays to choose from instead of the four trays that exist. The only thing I have changed that might relate to this network device is the Admin password on the domain controller. I haven't made any changes to the Sharp device or the driver, until recently when I tired to update the driver for this device but that didn't fix anything. The domain controller is a Server 2008 VM running in Hyper-visor and it is pushing the shared printer out to the domain. I have looked at the web interface to manage the device and I can see all four paper trays in there, however if I try to see the number of trays from the driver interface, I can only see the top two paper trays and there should be four of them. This is the same with the admin account on the server or a workstation inside the domain, also a standard user account see's the same result. I have even tried updating the tray status within the driver to show more trays, but that doesn't help. I am hoping there is someone out there that has experienced this problem and knows a solution.

  Read the article

• Optical Audio out stuck on on a MacBook

  - by Clinton Blackmore

  Apple have made an interesting headphone port for the MacBook (and some other Intel Mac models). It works like a standard jack: nothing plugged in - audio comes out of built-in speakers headphones/external speakers plugged in - plays through headphones/external speakers but you can also use a special adapter (which trips a tiny microswitch) to get an optical audio out signal (which you can presumably plug into a nice surround-sound system). This is all well and good except when, like auto-tracking, it doesn't work, and you are left with nothing to adjust. Users report that they get no sound when they have nothing plugged in and that a red light emanates from the headphone port. If you go to System Preferences - Sound - Output, it will say (IIRC) "Optical Out" instead of "Internal Speakers". The only solution I'm aware of is to try to reset the switch by inserting and removing a set of headphones or a toothpick, perhaps wiggling it inside of the port, and hoping that you luck out and get it. Are there other ways to fix this problem? Does anyone know where the microswitch is or have a good technique to reset it?

  Read the article

• what is the fastest way to copy all data to a new larger hard drive?

  - by SUPER user

  I was certain this would have been covered before, but I cannot find an answer amongst all the almost-duplicates that come up; sorry if I've missed something obvious. I have a full 320gb disk inside my machine, a new 1tb disk to replace it, and a USB 2.0 chassis. It is only data on a single partition, no OS/apps involved, and the old drive will be kept somewhere as backup (no secure wiping etc). The simple option would be to put new disk in USB chassis, copy files, then swap them over. But for USB pen drives, reading is around 4x faster than writing. If the same is true for a USB SATA chassis (is it?) then it would be significantly faster to swap the drives first and read from the old drive over USB, right? Then the other consideration is that copying lots of files is usually slower than a single file of equivalent size. Is Windows 7 smart enough to do everything in a single lump like that, or is there specialised software that should be used instead? (Even if SATA-SATA copying is faster than involving USB, knowing what to do when it isn't an option is useful information.) Summary: Does a USB SATA chassis suffer from a read/write inequality? (like a USB pen drive does, but unlike a direct SATA connection) Can Windows 7 do sequential access? (I can't find confirmation if Robocopy does this.) Or is it necessary to use a bootable CD/USB with something like Clonezilla to achieve sequential copy speeds?

  Read the article

• Disable the user of Internet explorer through policies when called from HTML help

  - by Stephane

  Hello, I have a locked down environment where users are prohibited from doing, well, basically anything but run the specific programs we specify. We just switched a program from using the venerable "WinHELP" help format to HTML help (CHM) but that seem to have an unwanted and rather dangerous side effect: when a user click on a hyperlink inside the HTML help, a new internet explorer window is opened and the user is free to browse and do terrible things to my server (well, not that much, but still...) I have checked the session in this case and the IE window is actually hosted within the help engine: there is no iexplore.exe process running in the user session (and it cannot: it's explicitly prohibited). We have disable all help right now until we find a solution. I'm working with the help team to have all external URLs removed from the help file but that is going to be a long and error-prone task. Meanwhile, I've checked all the group policies option but I have to say that I was unable to find anything that would prevent a standalone IE window hosted in a random process from running. I don't want to disable WinHTTP or the IE rendering engine or anything of the sort. But I need to prevent all users members of a specific AD user group from ever having an IE window displayed to them. The servers are running Windows 2003 and Citrix metaframe 4.5. Thanks in advance

  Read the article

< Previous Page | 434 435 436 437 438 439 440 441 442 443 444 445  | Next Page >