record count - Page 438

SQL SERVER – Three Puzzling Questions – Need Your Answer

- by pinaldave

Last week I had asked three questions on my blog. I got very good response to the questions. I am planning to write summary post for each of three questions next week. Before I write summary post and give credit to all the valid answers. I was wondering if I can bring to notice of all of you this week. Why SELECT * throws an error but SELECT COUNT(*) does not This is indeed very interesting question as not quite many realize that this kind of behavior SQL Server demonstrates out of the box. Once you run both the code and read the explanation it totally makes sense why SQL Server is behaving how it is behaving. Also there is connect item is associated with it. Also read the very first comment by Rob Farley it also shares very interesting detail. Statistics are not Updated but are Created Once This puzzle has multiple right answer. I am glad to see many of the correct answer as a comment to this blog post. Statistics are very important and it really helps SQL Server Engine to come up with optimal execution plan. DBA quite often ignore statistics thinking it does not need to be updated, as they are automatically maintained if proper database setting is configured (auto update and auto create). Well, in this question, we have scenario even though auto create and auto update statistics are ON, statistics is not updated. There are multiple solutions but what will be your solution in this case? When to use Function and When to use Stored Procedure This question is rather open ended question – there is no right or wrong answer. Everybody developer has always used functions and stored procedures. Here is the chance to justify when to use Stored Procedure and when to use Functions. I want to acknowledge that they can be used interchangeably but there are few reasons when one should not do that. There are few reasons when one is better than other. Let us discuss this here. Your opinion matters. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, Readers Contribution, Readers Question, SQL, SQL Authority, SQL Performance, SQL Puzzle, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQLAuthority News, SQLServer, T SQL, Technology

Read the article

Today at Oracle OpenWorld 2012

- by Scott McNeil

We have another full day of great Oracle OpenWorld keynotes, sessions, demos and customer presentations in the Seen and Be Heard threater. Here's a quick run down of what's happening today with Oracle Enterprise Manager 12c: Download the Oracle Enterprise Manager 12c OpenWorld schedule (PDF) Oracle Enterprise Manager Cloud Control 12c (and Private Cloud) General Session Tues 2 Oct, 2012 Time Title Location 11:45 AM - 12:45 PM General Session: Using Oracle Enterprise Manager to Manage Your Own Private Cloud Moscone South - 103* 1:15 PM - 2:15 PM General Session: Breakthrough Efficiency in Private Cloud Infrastructure Moscone West - 3014 Conference Session Tues 2 Oct, 2012 Time Title Location 10:15 AM - 11:15 AM Oracle Exadata/Oracle Enterprise Manager 12c: Journey into Oracle Database Cloud Moscone West - 3018 10:15 AM - 11:15 AM Bulletproof Your Application Upgrades with Secure Data Masking and Subsetting Moscone West - 3020 10:15 AM - 11:15 AM Oracle Enterprise Manager 12c: Architecture Deep Dive, Tips, and Techniques Moscone South - 303 11:45 AM - 12:45 PM RDBMS Forensics: Troubleshooting with Active Session History Moscone West - 3018 11:45 AM - 12:45 PM Building and Operationalizing Your Data Center Environment with Oracle Exalogic Moscone South - 309 11:45 AM - 12:45 PM Securely Building a National Electronic Health Record: Singapore Case Study Westin San Francisco - Concordia 1:15 PM - 2:15 PM Managing Heterogeneous Environments with Oracle Enterprise Manager Moscone West - 3018 1:15 PM - 2:15 PM Complete Oracle WebLogic Server Management with Oracle Enterprise Manager 12c Moscone South - 309 1:15 PM - 2:15 PM Database Lifecycle Management with Oracle Enterprise Manager 12c Moscone West - 3020 1:15 PM - 2:15 PM Best Practices, Key Features, Tips, Techniques for Oracle Enterprise Manager 12c Upgrade Moscone South - 307 1:15 PM - 2:15 PM Enterprise Cloud with CSC’s Foundation Services for Oracle and Oracle Enterprise Manager 12c Moscone South - 236 5:00 PM - 6:00 PM Deep Dive 3-D on Oracle Exadata Management: From Discovery to Deployment to Diagnostics Moscone West - 3018 5:00 PM - 6:00 PM Everything You Need to Know About Monitoring and Troubleshooting Oracle GoldenGate Moscone West - 3005 5:00 PM - 6:00 PM Oracle Enterprise Manager 12c: The Nerve Center of Oracle Cloud Moscone West - 3020 5:00 PM - 6:00 PM Advanced Management of Oracle E-Business Suite with Oracle Enterprise Manager Moscone West - 2016 5:00 PM - 6:00 PM Oracle Enterprise Manager 12c Cloud Control Performance Pages: Falling in Love Again Moscone West - 3014 Hands-on Labs Tues 2 Oct, 2012 Time Title Location 10:15 AM - 12:45 PM Managing the Cloud with Oracle Enterprise Manager 12c Marriott Marquis - Salon 5/6 1:15 PM - 2:15 PM Database Performance Tuning Hands-on Lab Marriott Marquis - Salon 5/6 Scene and Be Heard Theater Session Tues 2 Oct, 2012 Time Title Location 10:30 AM - 10:50 AM Start Small, Grow Big: Hands-On Oracle Private Cloud—A Step-by-Step Guide Moscone South Exhibition Hall - Booth 2407 12:30 PM - 12:50 PM Blue Medora’s Oracle Enterprise Manager Plug-in for VMware vSphere Monitoring Moscone South Exhibition Hall - Booth 2407 Demos Demo Location Application and Infrastructure Testing Moscone West - W-092 Automatic Application and SQL Tuning Moscone South, Left - S-042 Automatic Fault Diagnostics Moscone South, Left - S-036 Automatic Performance Diagnostics Moscone South, Left - S-033 Complete Care for Oracle Using My Oracle Support Moscone South, Left - S-031 Complete Cloud Lifecycle Management Moscone North, Upper Lobby - N-019 Complete Database Lifecycle Management Moscone South, Left - S-030 Comprehensive Infrastructure as a Service via Oracle Enterprise Manager Moscone South, Left - S-045 Data Masking and Data Subsetting Moscone South, Left - S-034 Database Testing with Oracle Real Application Testing Moscone South, Left - S-041 Identity Management Monitoring with Oracle Enterprise Manager Moscone South, Right - S-212 Mission-Critical, SPARC-Powered Infrastructure as a Service Moscone South, Center - S-157 Oracle E-Business Suite, Siebel, JD Edwards, and PeopleSoft Management Moscone West - W-084 Oracle Enterprise Manager Cloud Control 12c Overview Moscone South, Left - S-039 Oracle Enterprise Manager: Complete Data Center Management Moscone South, Left - S-040 Oracle Exadata Management Moscone South, Center - Oracle Exalogic Management Moscone South, Center - Oracle Fusion Applications Management Moscone West - W-018 Oracle Real User Experience Insight Moscone South, Right - S-226 Oracle WebLogic Server Management and Java Diagnostics Moscone South, Right - S-206 Platform as a Service Using Oracle Enterprise Manager Moscone North, Upper Lobby - N-020 SOA Management Moscone South, Right - S-225 Self-Service Application Testing on Private and Public Clouds Moscone West - W-110 Oracle OpenWorld Music Festival New this year is Oracle’s first annual Oracle OpenWorld Musical Festival, featuring some of today's breakthrough musicians from around the country and the world. It's five nights of back-to-back performances in the heart of San Francisco—free to registered attendees. See the lineup Not Heading to OpenWorld—Watch it Live! Stay Connected: Twitter | Facebook | YouTube | Linkedin | Newsletter Download the Oracle Enterprise Manager Cloud Control12c Mobile app

Read the article

Why your Netapp is so slow...

- by Darius Zanganeh

Have you ever wondered why your Netapp FAS box is slow and doesn't perform well at large block workloads? In this blog entry I will give you a little bit of information that will probably help you understand why it’s so slow, why you shouldn't use it for applications that read and write in large blocks like 64k, 128k, 256k ++ etc.. Of course since I work for Oracle at this time, I will show you why the ZS3 storage boxes are excellent choices for these types of workloads. Netapp’s Fundamental Problem The fundamental problem you have running these workloads on Netapp is the backend block size of their WAFL file system. Every application block on a Netapp FAS ends up in a 4k chunk on a disk. Reference: Netapp TR-3001 Whitepaper Netapp has proven this lacking large block performance fact in at least two different ways. They have NEVER posted an SPC-2 Benchmark yet they have posted SPC-1 and SPECSFS, both recently. In 2011 they purchased Engenio to try and fill this GAP in their portfolio. Block Size Matters So why does block size matter anyways? Many applications use large block chunks of data especially in the Big Data movement. Some examples are SAS Business Analytics, Microsoft SQL, Hadoop HDFS is even 64MB! Now let me boil this down for you. If an application such MS SQL is writing data in a 64k chunk then before Netapp actually writes it on disk it will have to split it into 16 different 4k writes and 16 different disk IOPS. When the application later goes to read that 64k chunk the Netapp will have to again do 16 different disk IOPS. In comparison the ZS3 Storage Appliance can write in variable block sizes ranging from 512b to 1MB. So if you put the same MSSQL database on a ZS3 you can set the specific LUNs for this database to 64k and then when you do an application read/write it requires only a single disk IO. That is 16x faster! But, back to the problem with your Netapp, you will VERY quickly run out of disk IO and hit a wall. Now all arrays will have some fancy pre fetch algorithm and some nice cache and maybe even flash based cache such as a PAM card in your Netapp but with large block workloads you will usually blow through the cache and still need significant disk IO. Also because these datasets are usually very large and usually not dedupable they are usually not good candidates for an all flash system. You can do some simple math in excel and very quickly you will see why it matters. Here are a couple of READ examples using SAS and MSSQL. Assume these are the READ IOPS the application needs even after all the fancy cache and algorithms. Here is an example with 128k blocks. Notice the numbers of drives on the Netapp! Here is an example with 64k blocks You can easily see that the Oracle ZS3 can do dramatically more work with dramatically less drives. This doesn't even take into account that the ONTAP system will likely run out of CPU way before you get to these drive numbers so you be buying many more controllers. So with all that said, lets look at the ZS3 and why you should consider it for any workload your running on Netapp today. ZS3 World Record Price/Performance in the SPC-2 benchmark ZS3-2 is #1 in Price Performance $12.08ZS3-2 is #3 in Overall Performance 16,212 MBPS Note: The number one overall spot in the world is held by an AFA 33,477 MBPS but at a Price Performance of $29.79. A customer could purchase 2 x ZS3-2 systems in the benchmark with relatively the same performance and walk away with $600,000 in their pocket.

Read the article

Evaluating Solutions to Manage Product Compliance? Don’t Wait Much Longer

- by Evelyn Neumayr

By Kerrie Foy, Director PLM Product Marketing, Oracle Depending on severity, product compliance issues can cause various problems from run-away budgets to business closures. But effective policies and safeguards can create a strong foundation for innovation, productivity, market penetration and competitive advantage. If you’ve been putting off a systematic approach to product compliance, it is time to reconsider that decision. Why now? No matter what industry, companies face a litany of worldwide and regional regulations that require proof of product compliance and environmental friendliness for market access. For example, Restriction of Hazardous Substances (RoHS), a regulation that restricts the use of six dangerous materials used in the manufacture of electronic and electrical equipment, was originally adopted by the European Union in 2003 for implementation in 2006 and has evolved over time through various regional versions for North America, China, Japan, Korea, Norway and Turkey. In addition, the RoHS directive allowed for material exemptions used in Medical Devices, but that exemption ends in 2014. Additional regulations worth watching are the Battery Directive, Waste Electrical and Electronic Equipment (WEEE), and Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) directives. Additional regulations are expected from organizations such as the Food and Drug Administration in the US and similar organizations elsewhere. Meeting compliance requirements and also successfully investing in eco-friendly designs can be a major challenge. It may involve transforming business models, go-to-market strategies, supply networks, quality assurance policies and compliance processes. Without a single source of truth for product data and without proper processes in place, ensuring product compliance burgeons into a crushing task that is cost-prohibitive and overwhelming. However, the risk to consumer goodwill and satisfaction, revenue, business continuity, and market potential is too great not to solve the compliance challenge. Companies are beginning to adapt and thrive by implementing systematic approaches to product compliance that are more than functional bandages, they are revenue-generating engines. Consider working with Oracle to help you address your compliance needs. Many of the world’s most innovative leaders and pioneers are leveraging Oracle’s Agile Product Lifecycle Management (PLM) portfolio of enterprise applications to manage the product value chain, centralize product data, automate processes, and launch more eco-friendly products to market faster. Particularly, the Agile Product Governance & Compliance (PG&C) solution provides out-of-the-box functionality to integrate actionable regulatory information into the enterprise product record from the ideation to the disposal/recycling phase. Agile PG&C is a comprehensive solution that makes product compliance per corporate initiatives and regulations more reliable and efficient. Throughout product lifecycles, use the solution to support full material disclosures, gain rapid visibility into non-compliance issues, efficiently manage declarations with your suppliers, feed compliance data into a corrective action if a product must be changed, and swiftly satisfy audits by showing all due diligence tracked in one solution. Given the compounding regulation and consumer focus on urgent environmental issues, now is the time to act. Implementing an enterprise-wide systematic approach to product compliance is a competitive investment. From the start, Agile PG&C enables companies to confidently design for compliance and sustainability, reduce the cost of compliance, minimize the risk of business interruption, deliver responsible products, and inspire new innovation. Don’t wait any longer! To find out more about Agile Product Governance & Compliance download the data sheet, contact your sales representative, or call Oracle at 1-800-633-0738.

Read the article

RTS Movement + Navigation + Destination

- by Oliver Jones

I'm looking into building my own simple RTS game, and I'm trying to get my head around the movement of single, and multi selected units. (Developing in Unity) After much research, I now know that its a bigger task than I thought. So I need to break it down. I already have an A* navigation system with static obstacles taken into account. I don't want to worry about dynamic local avoidance right now. So I guess my first break down question would be: How would I go about moving mutli units to the same location. Right now - my units move to the location, but because they're all told to go to the same location, they start to 'fight' over one another to get there. I think theres two paths to go down: 1) Give each individual unit a separate destination point that is close to the 'master' destination point - and get the units to move to that. 2) Group my selected units in a flock formation, and move that entire flock group towards the destination point. Question about each path: 1a) How can I go about finding a suitable destination point that is close to the master destination? What happens if there isn't a suitable destination point? 1b) Would this be more CPU heavy? As it has to compute a path for each unit? (40 unit count). 2a) Is this a good idea? Not giving the units themselves a destination, but instead the flock (which holds the units within). The units within the flock could then maintain a formation (local avoidance) - though, again local avoidance is not an issue at this current time. 2b) Not sure what results I would get if I have a flock of 5 units, or a flock of 40 units, as the radius would be greater - which might mess up my A* navigation system. In other words: A flock of 2 units will be able to move down an alleyway, but a flock of 40 wont. But my nav system won't take that into account. I would appreciate any feedback. Kind regards, Ollie Jones

Read the article

10 Best Programming Podcast 2010 Edition

- by mbcrump

This list is in no particular order. Just the 10 best programming podcast that I have found so far. Stack Overflow Podcast - Jeff Atwood (of codinghorror.com) and Joel Spolsky (of joelonsoftware.com) discuss the development of their new programming community, StackOverflow.com. [This Podcast hasn’t been updated in a while, but its always great to hear more from Jeff Atwood] Hanselminutes - Hanselminutes is a weekly audio talk show with noted web developer and technologist Scott Hanselman and hosted by Carl Franklin. Scott discusses utilities and tools, gives practical how-to advice, and discusses ASP.NET or Windows issues and workarounds. [This Podcast has recently started talking about random topics like diabetes, plane travel and geek relationship tips. I am not sure if Scott is trying to move to a more mainstream audience or not] Herding Code - A weekly discussion featuring K. Scott Allen (odetocode.com), Kevin Dente, Scott Koon (lazycoder.com), and Jon Galloway. [Great all all-around podcast that I would recommend to all] Deep Fried Bytes - Deep Fried Bytes is an audio talk show with a Southern flavor hosted by technologists and developers Keith Elder and Chris Woodruff. The show discusses a wide range of topics including application development, operating systems and technology in general. Anything is fair game if it plugs into the wall or takes a battery. [This is one that just keeps getting better] Dot Net Rocks - .NET Rocks! is an Internet Audio Talk Show for Microsoft .NET Developers. [One of the first and usually very high quality content] Connected Show - Connected Show Podcast! A podcast covering new Microsoft technology for the developer community. The show is hosted by Dmitry Lyalin and Peter Laudati. [This and Polymorphic are one of my favorite podcast – Dmitry is a great host and would recommend this to all] Polymorphic Podcast - Object oriented development, architecture and best practices in .NET [Craig is a ASP.NET MVP and a great presenter. His podcast is great and it could only be better if he recorded it more often] ASP.NET Podcast - Wallace B. (Wally) McClure presents interviews and short technical talks on .NET Technologies. [Has great information on ASP.NET of course as well as iPhone Dev] Ruby on Rails Podcast - News and interviews about the Ruby language and the Rails website framework. [Even though I am not a Ruby programmer, I’ve found this podcast very interesting] Software Engineering Radio - Software Engineering Radio is a podcast targeted at the professional software developer. The goal is to be a lasting educational resource, not a newscast. Every ten days, a new episode is published that covers all topics software engineering. Episodes are either tutorials on a specific topic, or an interview with a well-known character from the software engineering world. All SE Radio episodes are original content ? we do not record conferences or talks given in other venues. Each episode comprises two speakers to ensure a lively listening experience. SE Radio is an independent and non-commercial organization. [Another excellent podcast – I would recommend any programmer add this to his/her drive home] If I have missed something, please feel free to email me and it might make the 2011 list. =)

Read the article

bluez 5.19 PS4 controller

- by Athanase

I currently have a problem when pairing my computer with a PS4 remote. On my Ubuntu 14.04 I removed everything related with bluez and bluetooth, and I built and installed bluez 5.19. Here are some useful command outputs: jean@system ~ hcitool hcitool - HCI Tool ver 5.19 jean@system ~ hcitool dev Devices: hci0 00:15:83:4C:0C:BB jean@system ~ bluetoothctl [bluetooth]# version Version 5.19 jean@system ~ bluetoothctl [NEW] Controller 00:15:83:4C:0C:BB BlueZ [default] jean@system ~ lsusb Bus 003 Device 012: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) So here is what happens. When I try to hard pair the controller with the computer, by holding the share and ps button for a while, everything works as expected and the pairing is done properly. After a hard pairing if I try the pairing by pressing the ps button only, nothings happen. In order to go it, I first power up the bluetooth dongle: jean@system ~ sudo hciconfig hciX up and then I run the bluetooh deamon bluetoothd: jean@system /usr/libexec/bluetooth ~ ./bluetoothd -d -n bluetoothd[11270]: Bluetooth daemon 5.19 bluetoothd[11270]: src/main.c:parse_config() parsing main.conf bluetoothd[11270]: src/main.c:parse_config() discovto=0 bluetoothd[11270]: src/main.c:parse_config() pairto=0 bluetoothd[11270]: src/main.c:parse_config() auto_to=60 bluetoothd[11270]: src/main.c:parse_config() name=%h-%d bluetoothd[11270]: src/main.c:parse_config() class=0x000100 bluetoothd[11270]: src/main.c:parse_config() Key file does not have key 'DeviceID' bluetoothd[11270]: src/gatt.c:gatt_init() Starting GATT server bluetoothd[11270]: src/adapter.c:adapter_init() sending read version command bluetoothd[11270]: Starting SDP server bluetoothd[11270]: src/sdpd-service.c:register_device_id() Adding device id record for 0002:1d6b:0246:0513 ... bluetoothd[11270]: src/adapter.c:adapter_service_insert() /org/bluez/hci0 bluetoothd[11270]: src/adapter.c:add_uuid() sending add uuid command for index 0 bluetoothd[11270]: profiles/audio/a2dp.c:a2dp_sink_server_probe() path /org/bluez/hci0 bluetoothd[11270]: profiles/audio/a2dp.c:a2dp_source_server_probe() path /org/bluez/hci0 bluetoothd[11270]: src/adapter.c:btd_adapter_unblock_address() hci0 00:00:00:00:00:00 bluetoothd[11270]: src/adapter.c:get_ltk_info() A4:15:66:C1:0D:2A bluetoothd[11270]: src/device.c:device_create_from_storage() address A4:15:66:C1:0D:2A bluetoothd[11270]: src/device.c:device_new() address A4:15:66:C1:0D:2A bluetoothd[11270]: src/device.c:device_new() Creating device /org/bluez/hci0/dev_A4_15_66_C1_0D_2A bluetoothd[11270]: src/device.c:device_set_bonded() bluetoothd[11270]: src/adapter.c:get_ltk_info() A4:15:66:88:5E:9A bluetoothd[11270]: src/device.c:device_create_from_storage() address A4:15:66:88:5E:9A bluetoothd[11270]: src/device.c:device_new() address A4:15:66:88:5E:9A bluetoothd[11270]: src/device.c:device_new() Creating device /org/bluez/hci0/dev_A4_15_66_88_5E_9A bluetoothd[11270]: src/device.c:device_set_bonded() bluetoothd[11270]: src/adapter.c:load_link_keys() hci0 keys 2 debug_keys 0 bluetoothd[11270]: src/adapter.c:load_ltks() hci0 keys 0 bluetoothd[11270]: src/adapter.c:load_connections() sending get connections command for index 0 bluetoothd[11270]: src/adapter.c:adapter_service_insert() /org/bluez/hci0 bluetoothd[11270]: src/adapter.c:add_uuid() sending add uuid command for index 0 bluetoothd[11270]: src/adapter.c:set_did() hci0 source 2 vendor 1d6b product 246 version 513 bluetoothd[11270]: src/adapter.c:adapter_register() Adapter /org/bluez/hci0 registered bluetoothd[11270]: src/adapter.c:set_dev_class() sending set device class command for index 0 bluetoothd[11270]: src/adapter.c:set_name() sending set local name command for index 0 bluetoothd[11270]: src/adapter.c:set_mode() sending set mode command for index 0 bluetoothd[11270]: src/adapter.c:set_mode() sending set mode command for index 0 bluetoothd[11270]: src/adapter.c:adapter_start() adapter /org/bluez/hci0 has been enabled bluetoothd[11270]: src/adapter.c:trigger_passive_scanning() bluetoothd[11270]: plugins/hostname.c:property_changed() static hostname: system bluetoothd[11270]: plugins/hostname.c:property_changed() pretty hostname: bluetoothd[11270]: plugins/hostname.c:update_name() name: system bluetoothd[11270]: src/adapter.c:adapter_set_name() name: system bluetoothd[11270]: plugins/hostname.c:property_changed() chassis: desktop bluetoothd[11270]: plugins/hostname.c:update_class() major: 0x01 minor: 0x01 bluetoothd[11270]: src/adapter.c:load_link_keys_complete() link keys loaded for hci0 bluetoothd[11270]: src/adapter.c:load_ltks_complete() LTKs loaded for hci0 bluetoothd[11270]: src/adapter.c:get_connections_complete() Connection count: 0 And then I press the ps button of the PS4 controller bluetoothd[11270]: src/adapter.c:connected_callback() hci0 device A4:15:66:C1:0D:2A connected eir_len 5 bluetoothd[11270]: profiles/input/server.c:connect_event_cb() Incoming connection from A4:15:66:C1:0D:2A on PSM 17 bluetoothd[11270]: profiles/input/device.c:input_device_set_channel() idev (nil) psm 17 bluetoothd[11270]: Refusing input device connect: No such file or directory (2) bluetoothd[11270]: profiles/input/server.c:confirm_event_cb() bluetoothd[11270]: Refusing connection from A4:15:66:C1:0D:2A: unknown device bluetoothd[11270]: src/adapter.c:dev_disconnected() Device A4:15:66:C1:0D:2A disconnected, reason 3 bluetoothd[11270]: src/adapter.c:adapter_remove_connection() bluetoothd[11270]: plugins/policy.c:disconnect_cb() reason 3 bluetoothd[11270]: src/adapter.c:bonding_attempt_complete() hci0 bdaddr A4:15:66:C1:0D:2A type 0 status 0xe bluetoothd[11270]: src/device.c:device_bonding_complete() bonding (nil) status 0x0e bluetoothd[11270]: src/device.c:device_bonding_failed() status 14 bluetoothd[11270]: src/adapter.c:resume_discovery() So I don't know what is happening here and a bit of help would be appreciated.

Read the article

Running Multiple WebLogic and OSB Domains

- by jeff.x.davies

I have any number of OSB domain created on my machine at any point in time. For example, I have different domains for different version of Oracle Service Bus and Oracle SOA Suite. I also have different domains for different purposes. I have a demo domain and another domain for the projects in my blog. Starting with OSB 11g and the Apache Derby server, there is a small "gotcha" if you want to create multiple domains on a devevelopment machine. When you create a new domain for OSB 11g it will use the same database info for all databases and this will cause an error when starting the admin server of the second domain (the first domain doesn't have to be running for this error to occur). Here is an example of the error message in the server console: ####<Mar 8, 2011 2:58:48 PM PST> <Critical> <JTA> <jeff-laptop> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1299625128464> <BEA-110482> <A logging last resource failed during initialization. The server cannot boot unless all configured logging last resources (LLRs) initialize. Failing reason: weblogic.transaction.loggingresource.LoggingResourceException: java.sql.SQLException: JDBC LLR, table verify failed for table 'WL_LLR_ADMINSERVER', row 'JDBC LLR Domain//Server' record had unexpected value 'osb11gR1PS3//AdminServer' expected 'OSBCIM//AdminServer'*** ONLY the original domain and server that creates an LLR table may access it *** The solution is to create a database instance for each of your domains and this is very simple to do. After you create a domain using the Configuration Wizard, locate the wlsbjmsrpDataSource-jdbc.xml file that is found under the DOMAIN_HOME/config/jdbc directory. Near the top of the file you will see the following entry: <url>jdbc:derby://localhost:1527/osbexamples;create=true;ServerName=localhost;databaseName=osbexamples</url> You need to modify this entry with a different and unique database name. The easiest way to do this is to substiture the name of your domain. For example: <url>jdbc:derby://localhost:1527/mydomain;create=true;ServerName=localhost;databaseName=mydomain</url> will create a database named mydomain . Now, when you restart the admin server for the domain, it will create the new database for you. Do this for each domain you create on your development machine and you'll have no troubles. The process is much simpler if you are creating a domain using the Configuration Wizard. Simply name the database when you get to the Configure JDBC Component Schema step of the Configuration Wizard, select the OSB JMS Reporting Provider and set the name in the DBMS/Service field to whatever name you like, as shown in Figure 1 below. Figure 1 – Configuring the JDBC Component Schema That is all there is to it. Now you can create as many domains on your leptop or development machine as you like and not have to worry about them conflicting with each other.

Read the article

SQL SERVER – Transaction Log Full – Transaction Log Larger than Data File – Notes from Fields #001

- by Pinal Dave

I am very excited to announce a new series on this blog – Notes from Fields. I have been blogging for almost 7 years on this blog and it has been a wonderful experience. Though, I have extensive experience with SQL and Databases, it is always a good idea that we consult experts for their advice and opinion. Following the same thought process, I have started this new series of Notes from Fields. In this series we will have notes from various experts in the database world. My friends at Linchpin People have graciously decided to support me in my new initiation. Linchpin People are database coaches and wellness experts for a data driven world. In this very first episode of the Notes from Fields series database expert Tim Radney (partner at Linchpin People) explains a very common issue DBA and Developer faces in their career, when database logs fills up your hard-drive or your database log is larger than your data file. Read the experience of Tim in his own words. As a consultant, I encounter a number of common issues with clients. One of the more common things I encounter is finding a user database in the FULL recovery model that does not make a regular transaction log backups or ever had a transaction log backup. When I find this, usually the transaction log is several times larger than the data file. Finding this issue is very significant to me in that it allows to me to discuss service level agreements with the client. I get to ask questions such as, are nightly full backups sufficient or do they need point in time recovery. This conversation has now signed with the customer and gets them to thinking about their disaster recovery and high availability solutions. This issue is also very prominent on SQL Server forums and usually has the title of “Help, my transaction log has filled up my disk” or “Help, my transaction log is many times the size of my database”. In cases where the client only needs the previous full nights backup, I am able to change the recovery model to SIMPLE and shrink the transaction log using DBCC SHRINKFILE (2,1) or by specifying the transaction log file name by using DBCC SHRINKFILE (file_name, target_size). When the client needs point in time recovery then in most cases I will still end up switching the client to the SIMPLE recovery model to truncate the transaction log followed by a full backup. I will then schedule a SQL Agent job to make the regular transaction log backups with an interval determined by the client to meet their service level agreements. It should also be noted that typically when I find an overgrown transaction log the virtual log file count is also out of control. I clean up will always take that into account as well. That is a subject for a future blog post. If your SQL Server is facing any issue we can Fix Your SQL Server. Additional reading: Monitoring SQL Server Database Transaction Log Space Growth – DBCC SQLPERF(logspace) SQL SERVER – How to Stop Growing Log File Too Big Shrinking Truncate Log File – Log Full Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Backup and Restore, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

Read the article

Playing NSF music in FMOD.net

- by Tesserex

So, as the title says, I want to be able to play NSF files using FMOD, because my project already uses FMOD and I'd rather not replace it. This will involve figuring out how existing players and emulators work and porting it. I haven't yet found an existing player that uses FMOD. My starting point is the MyNes source from http://sourceforge.net/projects/mynes/. There are two big steps between here and what I'm looking for. MyNes plays from a ROM, not NSF. So, I have to rip out the APU and get it to play NSF files. The MyNes APU uses SlimDX, so I have to convert that to FMOD.NET. I am really stuck about how to go about either of these, because I'm not that familiar with audio formats and it's hard finding resources online. So here are a few questions: From what I can tell from the NSF spec at http://kevtris.org/nes/nsfspec.txt, it's just contains the relevant memory section of the ROM, plus the header. If anyone can verify or correct this that would be great. The emulator APU uses data from the rest of the emulator to play, including things like cycle counts. I'm not sure what replaces this in a standalone player. Can't I just load all the music data at once into a stream and play it? Joining #1 and #2, does the header data from the NSF substitute for some of the ROM data in the emulator code? Using FMOD, will I be following the usercreatedsound example for loading a stream? And does this format count as PCM? Specifically MyNes says PCM8. Any tips on loading / playing the stream in FMOD are appreciated. As an aside, I don't really understand the loading / playing sections of the spec I linked at all. It seems to apply to 6502 systems / emulators only and not to my situation. I know it's a long shot for anyone here to have enough experience in this area to help, but anything you can provide is definitely appreciated. A link to an existing .NET library that does this would be even better, but I don't believe one exists.

Read the article

My Doors - Why Standards Matter to Business

- by Brian Dayton

"Standards save money." "Standards accelerate projects." "Standards make better solutions." What do these statements mean to you? You buy technology solutions like Oracle Applications but you're a business person--trying to close the quarter, get performance reviews processed, negotiate a new sourcing contract, etc. When "standards" come up in presentations and discussions do you: - Nod your head politely - Tune out and check your smart phone - Turn to your IT counterpart and say "Bob's all over this standards thing, right Bob?" Here's why standards matter. My wife wants new external doors downstairs, ones that would get more light into the rooms. Am I OK with that? "Uhh, sure...it's a little dark in the kitchen." - 24 hours ago - wife calls to tell me that she's going to the hardware store and may look at doors - 20 hours ago - wife pulls into driveway, informs me that two doors are in the back of her station wagon, ready for me to carry - 19 hours ago - I re-discovered the fact that it's not fun to carry a solid wood door by myself - 5 hours ago - Local handyman, who was at our house anyway, tells me that the doors we bought will likely cost 2-3x the material cost in installation time and labor...the doors are standard but our doorways aren't We could have done more research. I could be more handy. Sure. But the fact is, my 1951 house wasn't built with me in mind. They built what worked and called it a day. The same holds true with a lot of business applications. They were designed and architected for one-time use with one use-case in mind. Today's business climate is different. If you're going to use your processes and technology to differentiate your business you should have at least a working knowledge of: - How standards can benefit your business - Your IT organization's philosophy around standards - Your vendor's track-record around standards...and watch for those who pay lip-service to standards but don't follow through The rallying cry in most IT organizations today is "learn more about the business, drop the acronyms." I'm not advocating that you go out and learn how to code in Java. But I do believe it will help your business and your decision-making process if you meet IT ½...even ¼ of the way there. Epilogue: The door project has been put on hold and yours truly has to return the doors to the hardware store tomorrow.

Read the article

JustMock is here !!

- by mehfuzh

As announced earlier by Hristo Kosev at Telerik blogs , we have started giving out JustMock builds from today. This is the first of early builds before the official Q2 release and we are pretty excited to get your feedbacks. Its pretty early to say anything on it. It actually depends on your feedback. To add few, with JustMock we tried to build a mocking tool with simple and intuitive syntax as possible excluding more and more noises and avoiding any smell that can be made to your code [We are still trying everyday] and we want to make the tool even better with your help. JustMock can be used to mock virtually anything. Moreover, we left an option open that it can be used to reduce / elevate the features just though a single click. We tried to make a strong API and make stuffs fluent and guided as possible so that you never have the chance to get de-railed. Our syntax is AAA (Arrange – Act – Assert) , we don’t believe in Record – Reply model which some of the smarter mocking tools are planning to remove from their coming release or even don’t have [its always fun to lean from each other]. Overall more signals equals more complexity , reminds me of 37 signals :-). Currently, here are the things you can do with JustMock ( will cover more in-depth in coming days) Proxied mode Mock interfaces and class with virtuals Mock properties that includes indexers Set raise event for specific calls Use matchers to control mock arguments Assert specific occurrence of a mocked calls. Assert using matchers Do recursive mocks Do Sequential mocking ( same method with argument returns different values or perform different tasks) Do strict mocking (by default and i prefer loose , so that i can use it as stubs) Elevated mode Mock static calls Mock final class Mock sealed classes Mock Extension methods Partially mock a class member directly using Mock.Arrange Mock MsCorlib (we will support more and more members in coming days) , currently we support FileInfo, File and DateTime. These are few, you need to take a look at the test project that is provided with the build to find more [Along with the document]. Also, one of feature that will i will be using it for my next OS projects is the ability to run it separately in proxied mode which makes it easy to redistribute and do some personal development in a more DI model and my option to elevate as it go. I’ve surely forgotten tons of other features to mention that i will cover time but don’t for get the URL : www.telerik.com/justmock Finally a little mock code: var lvMock = Mock.Create<ILoveJustMock>(); // set your goal Mock.Arrange(() => lvMock.Response(Arg.Any<string>())).Returns((int result) => result); //perform string ret = lvMock.Echo("Yes"); Assert.Equal(ret, "Yes"); // make sure everything is fine Mock.Assert(() => lvMock.Echo("Yes"), Occurs.Once()); Hope that helps to get started, will cover if not :-).

Read the article

Very very slow transfer speeds between Windows 7 and samba server running on Ubuntu 11.10/12.04 minimal

- by kuzyt

As mentioned in the title I tried transferring files between Windows 7 and the samba server running on both Ubuntu 11.10 and 12.04 but both showed very slow transfer speeds. Can someone please guide me in the right direction to debug this problem ? wget --output-document=/dev/null http://tokyo1.linode.com/100MB-tokyo.bin --2012-08-21 22:02:17-- http://tokyo1.linode.com/100MB-tokyo.bin Resolving tokyo1.linode.com (tokyo1.linode.com)... 106.187.33.12 Connecting to tokyo1.linode.com (tokyo1.linode.com)|106.187.33.12|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 104857600 (100M) [application/octet-stream] Saving to: `/dev/null' 8% [=============> ] 8,923,980 64.8K/s eta 15m 0s wlan0 IEEE 802.11abgn ESSID:"TNET" Mode:Managed Frequency:2.462 GHz Access Point: 58:6D:8F:26:20:7A Bit Rate=117 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=57/70 Signal level=-53 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:101 Invalid misc:2448 Missed beacon:0 03:00.0 Network controller: Atheros Communications Inc. AR9300 Wireless LAN adaptor (rev 01) Subsystem: Atheros Communications Inc. Device 3112 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fea00000 (64-bit, non-prefetchable) [size=128K] Expansion ROM at fea20000 [disabled] [size=64K] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/4 Maskable+ 64bit+ Address: 0000000000000000 Data: 0000 Masking: 00000000 Pending: 00000000 Capabilities: [70] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <1us, L1 <8us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1 <64us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Not Supported, TimeoutDis+ DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn- Capabilities: [140 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [300 v1] Device Serial Number 00-00-00-00-00-00-00-00 Kernel driver in use: ath9k Kernel modules: ath9k

Read the article

Oracle Social Network and the Flying Monkey Smart Target

- by kellsey.ruppel

Originally posted by Jake Kuramoto on The Apps Lab blog. I teased this before OpenWorld, and for those of you who didn’t make it to the show or didn’t come by the Office Hours to take the Oracle Social Network Technical Tour Noel (@noelportugal) ran, I give you the Flying Monkey Smart Target. In brief, Noel built a target, about two feet tall, which when struck, played monkey sounds and posted a comment to an Oracle Social Network Conversation, all controlled by a Raspberry Pi. He also connected a Dropcam to record the winner just prior to the strike. I’m not sure how it all works, but maybe Noel can post the technical specifics. Here’s Noel describing the Challenge, the Target and a few other tidbit in an interview with Friend of the ‘Lab, Bob Rhubart (@brhubart). The monkey target bits are 2:12-2:54 if you’re into brevity, but watch the whole thing. Here are some screen grabs from the Oracle Social Network Conversation, including the Conversation itself, where you can see all the strikes documented, the picture captured, and the annotation capabilities: #gallery-1 { margin: auto;? } #gallery-1 .gallery-item { float: left; margin-top: 10px; text-align: center; width: 33%; } #gallery-1 img { border: 2px solid #cfcfcf; } #gallery-1 .gallery-caption { margin-left: 0; } That’s Diego in one shot, looking very focused, and Ernst in the other, who kindly annotated himself, two of the development team members. You might have seen them in the Oracle Social Network Hands-On Lab during the show. There’s a trend here. Not by accident, fun stuff like this has becoming our calling card, e.g. the Kscope 12 WebCenter Rock ‘em Sock ‘em Robots. Not only are these entertaining demonstrations, but they showcase what’s possible with RESTful APIs and get developers noodling on how easy it is to connect real objects to cloud services to fix pain points. I spoke to some great folks from the City of Atlanta about extending the concepts of the flying monkey target to physical asset monitoring. Just take an internet-connected camera with REST APIs like the Dropcam, wire it up to Oracle Social Netwok, and you can hack together a monitoring device for a datacenter or a warehouse. Sure, it’s easier said than done, but we’re a lot closer to that reality than we were even two years ago. Another noteworthy bit from Noel’s interview, beginning at 2:55, is the evolution of social developer. Speaking of, make sure to check out the Oracle Social Developer Community. Look for more on the social developer in the coming months. Noel has become quite the Raspberry Pi evangelist, and why not, it’s a great tool, a low-power Linux machine, cheap ($35!) and highly extensible, perfect for makers and students alike. He attended a meetup on Saturday before OpenWorld, and during the show, I heard him evangelizing the Pi and its capabilities to many people. There is some fantastic innovation forming in that ecosystem, much of it with Java. The OTN gang raffled off five Pis, and I expect to see lots of great stuff in the very near future. Stay tuned this week for posts on all our Challenge entrants. There’s some great innovation you won’t want to miss. Find the comments. Update: I forgot to mention that Noel used Twilio, one of his favorite services, during the show to send out Challenge updates and information to all the contestants.

Read the article

Problem booting Windows after failed installation Ubuntu 12.04 alongside Windows 7

- by Tassos

I tried to install in my laptop Ubuntu 12.04 so that I can dual-boot with Windows 7. I made some mistakes during this process and I didn't manage to install Ubuntu. But my real problem now is that I'm afraid that I also destroyed the installation of Windows 7. Your help would be precious for me. Here are the details of what I did: 1) I followed these instructions to dual boot Ubuntu 12.04 and Windows 7: http://www.linuxbsdos.com/2012/05/17/how-to-dual-boot-ubuntu-12-04-and-windows-7/ The only difference from what is described above, is that in my case the device names where: /dev/mapper/isw_fdjdhbadc_Volume0* instead of: /dev/sda* Note that I had created a bootable USB stick to do that. 2) The installation proceeded normally, but in the end I got a fatal error because the grub-install failed. 3) Then, after googling this problem, I runned ubuntu from the USB stick and run this command: sudo grub-install --root-directory=/home/ubuntu/temp /dev/mapper/isw_fdjdhbadc_Volume0p5 (/isw_fdjdhbadc_Volume0p5 was the partition that I had made for /boot) but this command also failed. 4) Then, I did something stupid (I think): I run the above command as: sudo grub-install --root-directory=/home/ubuntu/temp /dev/mapper/isw_fdjdhbadc_Volume0 namely I tried to install grub in the device isw_fdjdhbadc_Volume0 instead of the boot partition isw_fdjdhbadc_Volume0p5 The above command did not fail and was executed ok. 5) After that, I tried to boot my laptop, but it seemed that I had no operation system. Not even windows were detected. 6) I thought that I should uninstall grub from isw_fdjdhbadc_Volume0. So following some online instructions that I found, I booted again Ubuntu from the USB stick and run the following command (this was stupid since the instructions were for a totally different case than mine): sudo dd if=/dev/zero of=/dev/mapper/isw_fdjdhbadc_Volume0 bs=446 count=1 Afte that, I was still unable to boot Windows. I realize that I deleted something that I shouldn't, but I'm hope that this is not crucial and I can recover somehow. When I boot Ubuntu from the USB, I can see that the partition with Windows is still there, with all the directories, Windows files, my data etc. So, my question is: Is there a way to undo the mistakes that I desribed above and recover Windows 7? This is my major question. After solving that, I'd also like to know what I did wrong with the installation of Ubuntu. Thanks in advance for you valuable help!

Read the article

Part 9: EBS Customizations, how to track

- by volker.eckardt(at)oracle.com

In the previous blogs we were concentrating on the preparation tasks. We have defined standards, we know about the tools and techniques we will start with. Additionally, we have defined the modification strategy, and how to handle such topics best. Now we are ready to take the requirements! Such requirements coming over in spreadsheets, word files (like GAP documents), or in any other format. As we have to assign some attributes, we start numbering all that and assign a short name to each of these requirements (=CEMLI reference). We may also have already a Functional person assigned, and we might involve someone from the tech team to estimate, and we like to assign a status such as 'planned', 'estimated' etc. All these data are usually kept in spreadsheets, but I would put them into a database (yes, I am from Oracle :). If you don't have any good looking and centralized application already, please give a try with Oracle APEX. It should be up and running in a day and the imported sheets are than manageable concurrently! For one of my clients I have created this CEMLI-DB; in between enriched with a lot of additional functionality, but initially it was just a simple centralized CEMLI tracking application. Why I am pointing out again the centralized method to manage such data? Well, your data quality will dramatically increase, if you let your project members see (also review and update) "your" data. APEX allows you to filter, sort, print, and also export. And if you can spend some time to define proper value lists, everyone will gain from. APEX allows you to work in 'agile' mode, means you can improve your application step by step. Let's say you like to reference a document, or even upload the same, you can do that. Or, you need to classify the CEMLIs by release, just add this release field, same for business area or CEMLI type. One CEMLI record may then look like this: Prepare one or two (online) reports, to be ready to present your "workload" to the project management. Use such extracts also when you work offline (to prioritize etc.). But as soon as you are again connected, feed the data back into the central application. Note: I have combined this application with an additional issue tracker. Here the most important element is the CEMLI reference, which acts as link to any other application (if you are not using APEX also as issue tracker :). Please spend a minute to define such a reference (see blog Part 8: How to name Customizations). Summary: Building the bridge from Gap analyse to the development has to be done in a controlled way. Usually the information is provided differently, but it is suggested to collect all requirements centrally. Oracle APEX is a great solution to enter and maintain such information in a structured, but flexible way. APEX helped me a lot to work with distributed development teams during the complete development cycle.

Read the article

links for 2010-12-08

- by Bob Rhubart

What's a data architect? A comic dialog by one who knows: Oracle ACE Director Lewis Cunningham. Webcast: Oracle Business Intelligence Forum - December 15, 2010 at 9:00 am PT "The Oracle Business Intelligence Online Forum is a half-day virtual event that offers you a unique opportunity to see, in one place, the full portfolio of Oracle’s Business Intelligence (BI) offerings, and to learn what sets Oracle apart from the rest. Hear Oracle executives and industry analyst, Howard Dresner, present the current state of Business Intelligence, along with a series of customers who will share their case studies of putting analytics in action." Oracle Rolls Out Private Cloud Architecture And World-Record Transaction Performance | Forrester Blogs "Exadata has been dealt with extensively in other venues, both inside Forrester and externally, and appears to deliver the goods for I&O groups who require efficient consolidation and maximum performance from an Oracle database environment." -- Richard Fichera, Forrester Seven ways to get things started: Java EE Startup Classes with GlassFish and WebLogic "This is a blog about a topic that I realy don't like. But it comes across my ways over and over again and it's no doubt that you need it from time to time. Enough reasons for me to collect some information about it and publish it for your reference. I am talking about Startup-/Shutdown classes with Java EE applications or servers." -- Oracle ACE Director Markus "@myfear" Eisele." Monitoring Undelivered Messages in BPEL in SOA 10g (Antony Reynolds' Blog) "I am currently working with a client that wants to know how many undelivered messages they have, and if it reaches a certain threshold then they wants to alert the operator. To do this they plan on using the Enterprise Manager alert functions, but first they needs to know how many undelivered instances are out there." SOA author Antony Reynolds VirtualBox Appliances for Developers "Developers can simply download a few files, assemble them with a script , and then import and run the resulting pre-built VM in VirtualBox. This makes starting with these technologies even easier. Each appliance contains some Hands-On-Labs to start learning." -- Peter Paul van de Beek Oracle UCM 11g Remote Intradoc Client (RIDC) Integration with Oracle ADF 11g "It's great we have out of the box WebCenter ADF task flows for document management in UCM. However, for complete business scenario implementations, usually it's not enough and we need to manage Content Repository programmatically. This can be achieved through Remote Intradoc Client (RIDC) API. It's quite hard to find any practical information about this API, but I managed to get code for UCM folder creation/removal and folder information." -- Oracle ACE Director Andrejus Baranovskis Interview with Java Champion Matjaz B. Juric on Cloud Computing, SOA, and Java EE 6 "Matjaz Juric of Slovenia, head of the Cloud Computing and SOA Competence Centre at the University of Maribor, and professor at the University of Ljubljana, shares insights about cloud computing, SOA and Java EE 6." White Paper: Oracle Complex Event Processing High Availability "This whitepaper describes the high availability (HA) solutions available in Oracle CEP 11g Release 1 Patch Set 2 and presents the results of a benchmark study demonstrating the performance of the Oracle CEP HA solutions."

Read the article

Finding the maximum value/date across columns

- by AtulThakor

While working on some code recently I discovered a neat little trick to find the maximum value across several columns….. So the starting point was finding the maximum date across several related tables and storing the maximum value against an aggregated record. Here's the sample setup code: USE TEMPDB IF OBJECT_ID('CUSTOMER') IS NOT NULL BEGIN DROP TABLE CUSTOMER END IF OBJECT_ID('ADDRESS') IS NOT NULL BEGIN DROP TABLE ADDRESS END IF OBJECT_ID('ORDERS') IS NOT NULL BEGIN DROP TABLE ORDERS END SELECT 1 AS CUSTOMERID, 'FREDDY KRUEGER' AS NAME, GETDATE() - 10 AS DATEUPDATED INTO CUSTOMER SELECT 100000 AS ADDRESSID, 1 AS CUSTOMERID, '1428 ELM STREET' AS ADDRESS, GETDATE() -5 AS DATEUPDATED INTO ADDRESS SELECT 123456 AS ORDERID, 1 AS CUSTOMERID, GETDATE() + 1 AS DATEUPDATED INTO ORDERS .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Now the code used a function to determine the maximum date, this performed poorly. After considering pivoting the data I opted for a case statement, this seemed reasonable until I discovered other areas which needed to determine the maximum date between 5 or more tables which didn't scale well. The final solution involved using the value clause within a sub query as followed. SELECT C.CUSTOMERID, A.ADDRESSID, (SELECT MAX(DT) FROM (Values(C.DATEUPDATED),(A.DATEUPDATED),(O.DATEUPDATED)) AS VALUE(DT)) FROM CUSTOMER C INNER JOIN ADDRESS A ON C.CUSTOMERID = A.CUSTOMERID INNER JOIN ORDERS O ON O.CUSTOMERID = C.CUSTOMERID .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } As you can see the solution scales well and can take advantage of many of the aggregate functions!

Read the article

Measuring Code Quality

- by DotNetBlues

Several months back, I was tasked with measuring the quality of code in my organization. Foolishly, I said, "No problem." I figured that Visual Studio has a built-in code metrics tool (Analyze -> Calculate Code Metrics) and that would be a fine place to start with. I was right, but also very wrong. The Visual Studio calculates five primary metrics: Maintainability Index, Cyclomatic Complexity, Depth of Inheritance, Class Coupling, and Lines of Code. The first two are figured at the method level, the second at (primarily) the class level, and the last is a simple count. The first question any reasonable person should ask is "Which one do I look at first?" The first question any manager is going to ask is, "What one number tells me about the whole application?" My answer to both, in a way, was "Maintainability Index." Why? Because each of the other numbers represent one element of quality while MI is a composite number that includes Cyclomatic Complexity. I'd be lying if I said no consideration was given to the fact that it was abstract enough that it's harder for some surly developer (I've been known to resemble that remark) to start arguing why a high coupling or inheritance is no big deal or how complex requirements are to blame for complex code. I should also note that I don't think there is one magic bullet metric that will tell you objectively how good a code base is. There are a ton of different metrics out there, and each one was created for a specific purpose in mind and has a pet theory behind it. When you've got a group of developers who aren't accustomed to measuring code quality, picking a 0-100 scale, non-controversial metric that can be easily generated by tools you already own really isn't a bad place to start. That sort of answers the question a developer would ask, but what about the management question; how do you dashboard this stuff when Visual Studio doesn't roll up the numbers to the solution level? Since VS does roll up the MI to the project level, I thought I could just figure out what sort of weighting Microsoft used to roll method scores up to the class level and then to the namespace and project levels. I was a bit surprised by the answer: there is no weighting. That means that a class with one 1300 line method (which will score a 0 MI) and one empty constructor (which will score a 100 MI) will have an overall MI of a respectable 50. Throw in a couple of DTOs that are nothing more than getters and setters (which tend to score 95 or better) and the project ends up looking really, really healthy. The next poor bastard who has to work on the application is probably not going to be singing the praises of its maintainability, though. For the record, that 1300 line method isn't a hypothetical, either. So, what does one do with that? Well, I decided to weight the average by the Lines of Code per method. For our above example, the formula for the class's MI becomes ((1300 * 0) + (1 * 100))/1301 = .077, rounded to 0. Sounds about right. Continue the pattern for namespace, project, solution, and even multi-solution application MI scores. This can be done relatively easily by using the "export to Excel" button and running a quick formula against the data. On the short list of follow-up questions would be, "How do I improve my application's score?" That's an answer for another time, though.

Read the article

Textures do not render on ATI graphics cards?

- by Mathias Lykkegaard Lorenzen

I'm rendering textured quads to an orthographic view in XNA through hardware instancing. On Nvidia graphics cards, this all works, tested on 3 machines. On ATI cards, it doesn't work at all, tested on 2 machines. How come? Culling perhaps? My orthographic view is set up like this: Matrix projection = Matrix.CreateOrthographicOffCenter(0, graphicsDevice.Viewport.Width, -graphicsDevice.Viewport.Height, 0, 0, 1); And my elements are rendered with the Z-coordinate 0. Edit: I just figured out something weird. If I do not call this spritebatch code above doing my textured quad rendering code, then it won't work on Nvidia cards either. Could that be due to culling information or something like that? Batch.Instance.SpriteBatch.Begin(SpriteSortMode.Immediate, BlendState.AlphaBlend, SamplerState.LinearClamp, DepthStencilState.Default, RasterizerState.CullNone); ... spriteBatch.End(); Edit 2: Here's the full code for my instancing call. public void DrawTextures() { Batch.Instance.SpriteBatch.Begin(SpriteSortMode.Texture, BlendState.AlphaBlend, SamplerState.LinearClamp, DepthStencilState.Default, RasterizerState.CullNone, textureEffect); while (texturesToDraw.Count > 0) { TextureJob texture = texturesToDraw.Dequeue(); spriteBatch.Draw(texture.Texture, texture.DestinationRectangle, texture.TintingColor); } spriteBatch.End(); #if !NOTEXTUREINSTANCING // no work to do if (positionInBufferTextured > 0) { device.BlendState = BlendState.Opaque; textureEffect.CurrentTechnique = textureEffect.Techniques["Technique1"]; textureEffect.Parameters["Texture"].SetValue(darkTexture); textureEffect.CurrentTechnique.Passes[0].Apply(); if ((textureInstanceBuffer == null) || (positionInBufferTextured > textureInstanceBuffer.VertexCount)) { if (textureInstanceBuffer != null) textureInstanceBuffer.Dispose(); textureInstanceBuffer = new DynamicVertexBuffer(device, texturedInstanceVertexDeclaration, positionInBufferTextured, BufferUsage.WriteOnly); } if (positionInBufferTextured > 0) { textureInstanceBuffer.SetData(texturedInstances, 0, positionInBufferTextured, SetDataOptions.Discard); } device.Indices = textureIndexBuffer; device.SetVertexBuffers(textureGeometryBuffer, new VertexBufferBinding(textureInstanceBuffer, 0, 1)); device.DrawInstancedPrimitives(PrimitiveType.TriangleStrip, 0, 0, textureGeometryBuffer.VertexCount, 0, 2, positionInBufferTextured); // now that we've drawn, it's ok to reset positionInBuffer back to zero, // and write over any vertices that may have been set previously. positionInBufferTextured = 0; } #endif }

Read the article

Mostrar Imagenes en ListView utilizando ImageList WinForms

- by Jason Ulloa

El día de hoy veremos como trabajar con los controles ListView e Imagelist de WindowsForms para poder leer y mostrar una serie de imágenes. Antes de ello debo decir que pueden existir otras formas de mostrar imagenes que solo requieren un control por ejemplo con un Gridview pero eso será en otro post, ahora nos centraremos en la forma de realizarlo con los controles antes mencionados. Lo primero que haremos será crear un nuevo proyecto de windows forms, en mi caso utilizando C#, luego agregaremos un Control ImageList. Este control será el que utilicemos para almacenar todas las imágenes una vez que las hemos leído. Si revisamos el control, veremos que tenemos la opción de agregar la imágenes mediante el diseñador, es decir podemos seleccionarlas manualmente o bien agregarlas mediante código que será lo que haremos. Lo segundo será agregar un control ListView al Formulario, este será el encargado de mostrar las imagenes, eso sí, por ahora será solo mostrarlas no tendrá otras funcionalidades. Ahora, vamos al codeBehind y en el Evento Load del form empezaremos a codificar: Lo primero será, crear una nueva variable derivando DirectoryInfo, a la cual le indicaremos la ruta de nuestra carpeta de imágenes. En nuestro ejemplo utilizamos Application.StartUpPath para indicarle que vamos a buscar en nuestro mismo proyecto (en carpeta debug por el momento). DirectoryInfo dir = new DirectoryInfo(Application.StartupPath + @"\images"); Una vez que hemos creado la referencia a la ruta, utilizaremos un for para obtener todas la imágenes que se encuentren dentro del Folder que indicamos, para luego agregarlas al imagelist y empezar a crear nuestra nueva colección. foreach (FileInfo file in dir.GetFiles()) { try { this.imageList1.Images.Add(Image.FromFile(file.FullName)); } catch { Console.WriteLine("No es un archivo de imagen"); } } Una vez, que hemos llenado nuestro ImageList, entonces asignaremos al ListView sus propiedades, para definir la forma en que las imágenes se mostrarán. Un aspecto a tomar en cuenta acá será la propiedad ImageSize ya que está será la que definirá el tamaño que tendrán las imágenes en el ListView cuando sean mostradas. this.listView1.View = View.LargeIcon; this.imageList1.ImageSize = new Size(120, 100); this.listView1.LargeImageList = this.imageList1; Por último y con ayuda de otro for vamos a recorrer cada uno de los elementos que ahora posee nuestro ImageList y lo agregaremos al ListView para mostrarlo for (int j = 0; j < this.imageList1.Images.Count; j++) { ListViewItem item = new ListViewItem(); item.ImageIndex = j; this.listView1.Items.Add(item); } Como vemos, a pesar de que utilizamos dos controles distintos es realmente sencillo mostrar la imagenes en el ListView al final el control ImageList, solo funciona como un “puente” que nos permite leer la imagenes para luego mostrarlas en otro control. Para terminar, los proyectos de ejemplo: C# VB

Read the article

The Latest News About SAP

- by jmorourke

Like many professionals, I get a lot of my news from Google e-mail alerts that I’ve set up to keep track of key industry trends and competitive news. In the past few weeks, I’ve been getting a number of news alerts about SAP. Below are a few recent examples: Warm weather cuts short US maple sugaring season – by Toby Talbot, AP MILWAUKEE – Temperatures in Wisconsin had already hit the high 60s when Gretchen Grape and her family began tapping their 850 maple trees. They had waited for the state's ceremonial tapping to kick off the maple sugaring season. It was moved up five days, but that didn't make much difference. For Grape, the typically month-long season ended nine days later. The SAP had stopped flowing in a record-setting heat wave, and the 5-quart collection bags that in a good year fill in a day were still half-empty. Instead of their usual 300 gallons of syrup, her family had about 40. Maple syrup producers across the North have had their season cut short by unusually warm weather. While those with expensive, modern vacuum systems say they've been able to suck a decent amount of sap from their trees, producers like Grape, who still rely on traditional taps and buckets, have seen their year ruined. "It's frustrating," said the 69-year-old retiree from Holcombe, Wis. "You put in the same amount of work, equipment, investment, and then all of a sudden, boom, you have no SAP." Home & Garden: Too-Early Spring Means Sugaring Woes - by Georgeanne Davis for The Free Press Over this past weekend, forsythia and daffodils were blooming in the southern parts of the state as temperatures climbed to 85 degrees, and trees began budding out, putting an end to this year's maple syrup production even as the state celebrated Maine Maple Sunday. Maple sugaring needs cold nights and warm days to induce SAP flows. Once the trees begin budding, SAP can still flow, but the SAP is bitter and has an off taste. Many farmers and dairymen count on sugaring for extra income, so the abbreviated season is a real financial loss for them, akin to the shortened shrimping season's effect on Maine lobstermen. SAP season comes to a sugary Sunday finale – Kennebec Journal, March 26th, 2012 Rebecca Manthey stood out in the rain at the entrance of Old Fort Western keeping watch over a cast iron kettle of boiling SAP hooked to a tripod over a wood fire. Manthey and the rest of the Old Fort Western staff -- decked out in 18th-century attire -- joined sugar houses across the state in observance of Maine Maple Sunday. The annual event is sponsored by the Department of Agriculture and the Maine Maple Producers Association. She said the rain hadn't kept people from coming to enjoy all the events at the fort surrounding the production of Maple syrup. "In the 18th century, you would be boiling SAP in the woods, so I would be in the woods," Manthey explained to the families who circled around her. "People spent weeks and weeks in the woods. You don't want to cook it to fast or it would burn. When it looks like the right consistency then you send it (into the kitchen) to be made into sugar." Manthey said she enjoyed portraying an 18th-century woman, even in the rain, which didn't seem to bother visitors either. There was a steady stream of families touring the fort and enjoying the maple syrup demonstrations. I hope you enjoy these updates on SAP – Happy April Fool’s Day!

Read the article

Release 17 is here!

- by Cheryl

Our training development team has been busy updating courses to keep pace with the new release of CRM On Demand. Release 17 is here! And I heard recently that it's one of our biggest releases ever. A lot of new features and functionality for you to take advantage of - too much for me to cover in this blog post. But, I thought I'd tell you about a few of my favorites - be sure to take a look at the What's New in Release 17 recording to see the full list, though...because I'm only going to touch on a few. Create your own look - okay, I'm starting with the fun stuff. But, there is a new customizable themes feature so that you can change the look of the application; colors, logo, the shape of the tabs. And it's really easy. There's also a whole new library of ready-made themes for you to pick from if you just want to go with one of those. Use this new feature to match the look of your company logo and color scheme. Or blaze new trails. You can create the look for the whole company, or a different look for each CRM On Demand role. This might especially come in handy if you're using the Partner Relationship Management (PRM) capabilities of CRM On Demand - you can create themes for your partner-facing roles to provide branded partner portals. Speaking of PRM - there are enhancements in this release to help companies better manage their partner relationships. A new Deal Registration object, which is separate from the Opportunity record, and better Special Pricing Request and Marketing Development Fund Request processes, give a lot more flexibility in how companies can build and manage their relationships with partners. Some new options for Forecasts in in Release 17, too. You can now have more than one type of forecast generated each forecast period. For example, you might need to see a forecast of the total opportunity revenue for your sales team, as well as on that breaks down revenue by product. The forecast definition now lets you do that. Other options allow you to make submitting forecasts easier, split opportunity revenue across the team and forecast that split appropriately. And - look for the new Forecast subject area in Answers, for building custom forecast reports. Ever wish you could use Workflow Rules to automatically reassign leads if they haven't been followed up on...or to email a manager if the status of a service request isn't changed after a specified period of time? Then check out the new Wait action for workflows. I think you'll be happy. Ok, enough for today. There is a lot to Release 17 that I didn't mention - a lot has been added for our Life Science industry edition, some new data visibility options, a new Data Loader tool, and more. Stay tuned for more blog posts about these and other Release 17 features in the coming weeks. In the meantime, don't forget about all of the resources we have for you to learn more (see my Learning About Release 17 blog post for details).

Read the article

Increase application performance

- by Prayos

I'm writing a program for a company that will generate a daily report for them. All of the data that they use for this report is stored in a local SQLite database. For this report, the utilize pretty much every bit of the information in the database. So currently, when I query the datbase, I retrieve everything, and store the information in lists. Here's what I've got: using (var dataReader = _connection.Select(query)) { if (dataReader.HasRows) { while (dataReader.Read()) { _date.Add(Convert.ToDateTime(dataReader["date"])); _measured.Add(Convert.ToDouble(dataReader["measured_dist"])); _bit.Add(Convert.ToDouble(dataReader["bit_loc"])); _psi.Add(Convert.ToDouble(dataReader["pump_press"])); _time.Add(Convert.ToDateTime(dataReader["timestamp"])); _fob.Add(Convert.ToDouble(dataReader["force_on_bit"])); _torque.Add(Convert.ToDouble(dataReader["torque"])); _rpm.Add(Convert.ToDouble(dataReader["rpm"])); _pumpOneSpm.Add(Convert.ToDouble(dataReader["pump_1_strokes_pm"])); _pumpTwoSpm.Add(Convert.ToDouble(dataReader["pump_2_strokes_pm"])); _pullForce.Add(Convert.ToDouble(dataReader["pull_force"])); _gpm.Add(Convert.ToDouble(dataReader["flow"])); } } } I then utilize these lists for the calculations. Obviously, the more information that is in this database, the longer the initial query will take. I'm curious if there is a way to increase the performance of the query at all? Thanks for any and all help. EDIT One of the report rows is called Daily Drilling Hours. For this calculation, I use this method: // Retrieves the timestamps where measured depth == bit depth and PSI >= 50 public double CalculateDailyProjectDrillingHours(DateTime date) { var dailyTimeStamps = _time.Where((t, i) => _date[i].Equals(date) && _measured[i].Equals(_bit[i]) && _psi[i] >= 50).ToList(); return _dailyDrillingHours = Convert.ToDouble(Math.Round(TimeCalculations(dailyTimeStamps).TotalHours, 2, MidpointRounding.AwayFromZero)); } // Checks that the interval is less than 10, then adds the interval to the total time private static TimeSpan TimeCalculations(IList<DateTime> timeStamps) { var interval = new TimeSpan(0, 0, 10); var totalTime = new TimeSpan(); TimeSpan timeDifference; for (var j = 0; j < timeStamps.Count - 1; j++) { if (timeStamps[j + 1].Subtract(timeStamps[j]) <= interval) { timeDifference = timeStamps[j + 1].Subtract(timeStamps[j]); totalTime = totalTime.Add(timeDifference); } } return totalTime; }

Read the article

AWS .NET SDK v2: the message-pump pattern

- by Elton Stoneman

Originally posted on: http://geekswithblogs.net/EltonStoneman/archive/2013/10/11/aws-.net-sdk-v2--the-message-pump-pattern.aspxVersion 2 of the AWS SDK for .NET has had a few pre-release iterations on NuGet and is stable, if a bit lacking in step-by-step guides. There’s at least one big reason to try it out: the SQS queue client now supports asynchronous reads, so you don’t need a clumsy polling mechanism to retrieve messages. The new approach is easy to use, and lets you work with AWS queues in a similar way to the message-pump pattern used in the latest Azure SDK for Service Bus queues and topics. I’ve posted a simple wrapper class for subscribing to an SQS hub on gist here: A wrapper for the SQS client in the AWS SDK for.NET v2, which uses the message-pump pattern. Here’s the core functionality in the subscribe method: private async void Subscribe() { if (_isListening) { var request = new ReceiveMessageRequest { MaxNumberOfMessages = 10 }; request.QueueUrl = QueueUrl; var result = await _sqsClient.ReceiveMessageAsync(request, _cancellationTokenSource.Token); if (result.Messages.Count > 0) { foreach (var message in result.Messages) { if (_receiveAction != null && message != null) { _receiveAction(message.Body); DeleteMessage(message.ReceiptHandle); } } } } if (_isListening) { Subscribe(); } } which you call with something like this: client.Subscribe(x=>Log.Debug(x.Body)); The async SDK call returns when there is something in the queue, and will run your receive action for every message it gets in the batch (defaults to the maximum size of 10 messages per call). The listener will sit there awaiting messages until you stop it with: client.Unsubscribe(); Internally it has a cancellation token which it sets when you call unsubscribe, which cancels any in-flight call to SQS and stops the pump. The wrapper will also create the queue if it doesn’t exist at runtime. The Ensure() method gets called in the constructor so when you first use the client for a queue (sending or subscribing), it will set itself up: if (!Exists()) { var request = new CreateQueueRequest(); request.QueueName = QueueName; var response = _sqsClient.CreateQueue(request); QueueUrl = response.QueueUrl; } The Exists() check has to do make a call to ListQueues on the SNS client, as it doesn’t provide its own method to check if a queue exists. That call also populates the Amazon Resource Name, the unique identifier for this queue, which will be useful later. To use the wrapper, just instantiate and go: var queueClient = new QueueClient(“ProcessWorkflow”); queueClient.Subscribe(x=>Log.Debug(x.Body)); var message = {}; //etc. queueClient.Send(message);

Search Results

Search found 14378 results on 576 pages for 'record count'.

Page 438/576 | < Previous Page | 434 435 436 437 438 439 440 441 442 443 444 445 | Next Page >

- by pinaldave

- by Scott McNeil

- by Darius Zanganeh

- by Evelyn Neumayr

- by Oliver Jones

- by mbcrump

- by Athanase

- by jeff.x.davies

- by Pinal Dave

- by Tesserex

- by Brian Dayton

- by mehfuzh

- by kuzyt

- by kellsey.ruppel

- by Tassos

- by volker.eckardt(at)oracle.com

- by Bob Rhubart

- by AtulThakor

- by DotNetBlues

- by Mathias Lykkegaard Lorenzen

- by Jason Ulloa

- by jmorourke

- by Cheryl

- by Prayos

- by Elton Stoneman

< Previous Page | 434 435 436 437 438 439 440 441 442 443 444 445 | Next Page >