Search Results

Search found 1599 results on 64 pages for 'carlos fernandez san millan'.

Page 44/64 | < Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >

• What happens when the USB key or SD card I've installed VMware ESXi on fails?

  - by ewwhite

  An SD (SDHC) card installed in an HP ProLiant DL380p Gen8 server running VMware ESXi just failed. I encountered some rather ominous looking messages on the vCenter console and in the HP ProLiant ILO event log... Lost connectivity to the device ... backing the boot filesystem. As a result, host configuration changes will not be saved to persistent storage. Embedded Flash/SD-CARD: Error writing media 0, physical block 848880: Stack Exception. VMware advocates the use of USB and SD (SDHC) boot devices for ESXi. It was one of the main reasons the smaller footprint ESXi was developed (versus the older ESX). I've spent much time highlighting the differences between ESXi's installable and embedded modes to coworkers and clients. However, these failures do seem to happen. In this case, this is my third instance. Luckily, this is a vSphere cluster with SAN storage. What steps should be taken to remediate this failure?

  Read the article

• Active Directory using Samba/Open LDAP for user accounts

  - by Jon Rhoades

  I know this is the wrong way round... but Is it possible to use AD in front of Samba for our PC clients, so that the user accounts are in Samba/Open LDAP. Managing our fleet of Windows PC's is becoming more and more difficult with just Samba v3 - until Samba v4 comes along, it would be great if we could leverage Active Directory, but have the accounts stored in Samba/Open LDAP. Windows PC's are a minority in our organisation & Samaba/Open LDAP are used for just about every service (Zimbra/RADIUS/Intranet/SAN/Printing/...) so it will have to remain the definitive account source. Anyway, it probably can't be done, but I thought I would ask for ideas anyway.

  Read the article

• NetApp and SQL Server?

  - by Edinor

  Do you have any good or bad experiences to share running SQL Server OLTP Systems on NetApp appliances? I have been working with a small, relatively low-volume cluster with a lower-end NetApp device, and I have found the environment to be generally unstable, at least compared to my experiences with other SANs, iSCSI arrays, and DAS setups. I struggle to believe that RAID DP and WAFL are more than fairy-dust technologies. A solution has been proposed to me that I just need a bigger, better NetApp, with PAM cards and other cool technology I've not heard of, and I feel like I would be better off spending a quarter of that on good direct-attached drives and a beefy server. At the same time, I feel that an Enterprise-class SAN should be something I can count on to be consistently a more stable, better performer than the less expensive solution I might propose. Are you a SQL Server DBA in an OLTP environment and love your NetApp? If you don't like them, why not?

  Read the article

• Can ISC dhcpd operate as a proxy dhcp server for PXE boot?

  - by Matt

  I have an existing LAN with a DHCP server already dishing out IP addresses. For various reasons I cannot replace that server so it will still need to dish out IP addresses. I've been experimenting with dnsmasq in proxy mode to provide PXE boot filenames. Now I have dnsmasq chainloading iPXE ok, but I found that the problem with dnsmasq is that in proxy mode it won't send dhcp options down. So I can't seem to send option 17 to boot iscsi san. I read somewhere that it's not enabled in the source code. Oh well, so I thought perhaps I should try isc dhcpd (default version4 with ubuntu). But I can't find any configuration examples that work as a proxy. Does isc dhcpd even work in proxy mode? examples on the web imply patching the source. What other options do I have?

  Read the article

• Dynamic group membership to work around no nested security group support for Active Directory

  - by Bernie White

  My problem is that I have a number of network administration applications like SAN switches that do not support nested groups from Active Directory Domain Services (AD DS). These legacy administration applications use either LDAP or LDAPS. I am fairly sure I can use Active Directory Lightweight Directory Services (AD LDS) and possibly Windows Authorization Manager to work around this issue; however I am not really sure where to start. I want to end up with: A single group that can be queried over LDAP/LDAPS for all it’s direct members LDAP proxy for user name and password credentials to AD DS Easy way to admin the group, ideally the group would aggregate the nested membership in AD DS. a native solution using freely available components from the Windows stack. If you have any suggestions or solutions that you have previously used to solve this issue please let me know.

  Read the article

• Resizing an iscsi LUN on an EMC under Linux RHEL 5

  - by niXar

  I expanded a LUN on my SAN (from 30G to 50G), and tried all kind of voodoo but it looks like the system still believes the device is still small, despite showing me the new size alright. # blockdev --getsize64 /dev/sdl 53687091200 # dd if=/dev/sdl skip=$(( 31*1024*1024*1024/512 )) count=1|hexdump -C dd: reading `/dev/sdl': Input/output error The dd line works for blocks below the 30G original size. If I reboot, the problem goes away, but I don't want to since the machine has a dozen VMs running. I tried various magic, such as: iscsiadm -m node -R -I iface0 ... to no avail. Note: I'm not using multipath.

  Read the article

• KVM online disk resize?

  - by Eil

  We're evaluting KVM for Linux virtualization on a few projects. All is going well so far. But one of our requirements is the ability to add disk space to a running guest without rebooting or taking it offline. Is this possible with KVM? The only thing I've found so far (but have not tested yet) is the ability to hotplug disks into the machine. If I go this route, then I could always add the new disk to an LVM volume group on the guest and then extend the chosen logical volume. The biggest downside to this approach is that over time we might end up with guests having variable numbers of virtual disks. The "real" disk space would be provided to the host over a SAN, so we can always add more space to the host whenever.

  Read the article

• HP DL160 vs DL360 for virtualization

  - by Chris

  Hi, We're planning to consolidate our infrastructure (a dozen servers). We'll buy two or three identical new servers who will be setup as a XenServer pool. Load balancing and HA tools will monitor the pool and vMotion VMs in case of failure/overload. I know that the DL100 series of HP servers is cheaper than the DL300 serie (in every sense of the word). As we don't need local storage (we have a SAN) and can live with a temporary down server (provided that Xen Server HA tools work as advertized), what are the downsides going with the DL100 serie ? Thanks, Chris

  Read the article

• Troubleshooting server performance with a hosted server?

  - by ProfessionalAmateur

  We are in a tough spot, we have a hosted server with the following specs: OS: Windows Server 2008 R2 Enterprise SP1 64bit Processor: Intel Xeon X7550 @ 2GHz (8 processors) RAM: 16GB The file system is on a SAN or NAS (not sure). We are seeing very odd issues where a user will open a 25MB .xslb file and it takes literally 60-120 seconds sometimes. The server is just dog slow for excel. Resources are not being pegged, CPU never jumps up, plenty of RAM... it's just oddly slow. Our host has been looking at the issue for several weeks with not much to show for it. Is there a utility I can run myself that will help trackdown our issue? I have found Server Performance Advisor V1.0 Any experience in using it? Our host is ultimately responsible for fixing this, but we are going on 1 month and our users are losing patience. Any tips would be helpful.

  Read the article

• Why is business-class storage so expensive?

  - by Mark Henderson

  This is a Canonical Question about the Cost of Enterprise Storage. See also the following question: What's the best way to explain storage issues to developers and other users Regarding general questions like: Why do I have to pay 50 bucks a month per extra gigabyte of storage? Our file server is always running out of space, why doesn't our sysadmin just throw an extra 1TB drive in there? Why is SAN equipment so expensive? The Answers here will attempt to provide a better understanding of how enterprise-level storage works and what influences the price. If you can expand on the Question or provide insight as to the Answer, please post.

  Read the article

• Unable to delete duplicate pagefile.sys

  - by user128364

  I have one SQL server that contain two drives on it and both drives are on SAN. C drive contains OS and V drive Contain pagefile.sys file. I rebooted my server and both drives was unmapped on SQL server. Some How one drive came (the OS drive) and created pagefile.sys on C drive and then I rebooted my server remapped the v drive. Now I have two pagefile.sys on C and V drive. But under Advance setting only V drive option is checked as pagefile. How do delete duplicate pagefile on C drive. It showing me that " the program is being used" while deleting the pagefile

  Read the article

• Simple SQL Server 2005 Replication - "D-1" server used for heavy queries/reports

  - by Ricardo Pardini

  Hello. We have two SQL 2005 machines. One is used for production data, and the other is used for running queries/reports. Every night, the production machine dumps (backups) it's database to disk, and the other one restores it. This is called the D-1 process. I think there must be a more efficient way of doing this, since SQL 2005 has many forms of replication. Some requirements: 1) No need for instant replication, there can be (some) delay 2) All changes (including schemas, data, constraints, indexes) need to be replicated without manual intervention 3) It is used for a single database only 4) There is a third server available if needed 5) There is high bandwidth (gigabit ethernet) available between the servers 6) There isn't a shared storage (SAN) available What would be a good alternative to this daily backup/restore routine? Thanks!

  Read the article

• using sed, how to change the text on line seven to read seventh?

  - by Steve

  using sed, how to change the text on line seven to read seventh? Steve Blenheim:238-923-7366:95 Latham Lane, Easton, PA 83755:11/12/56:20300 Betty Boop:245-836-8357:635 Cutesy Lane, Hollywood, CA 91464:6/23/23:14500 Igor Chevsky:385-375-8395:3567 Populus Place, Caldwell, NJ 23875:6/18/68:23400 Norma Corder:397-857-2735:74 Pine Street, Dearborn, MI 23874:3/28/45:245700 Jennifer Cowan:548-834-2348:583 Laurel Ave., Kingsville, TX 83745:10/1/35:58900 Jon DeLoach:408-253-3122:123 Park St., San Jose, CA 04086:7/25/53:85100 Karen Evich:284-758-2857:23 Edgecliff Place, Lincoln, NB 92743:7/25/53:85100 Fred Fardbarkle:674-843-1385:20 Parak Lane, Duluth, MN 23850:4/12/23:780900 Lori Gortz:327-832-5728:3465 Mirlo Street, Peabody, MA 34756:10/2/65:35200 Paco Gutierrez:835-365-1284:454 Easy Street, Decatur, IL 75732:2/28/53:123500 Ephram Hardy:293-259-5395:235 CarltonLane, Joliet, IL 73858:8/12/20:56700

  Read the article

• Microsoft Office 2007

  - by nardone25

  Hello everyone in serverfault. I am having a big problem at my job. I will let everyone know what I am using. I have two ibm x3690 servers with vmware esxi on both. Our product server has 8 vm on there. I have two lefthand san from HP. I have a watchgurd firewall. Our other site. I have one server over there ibm x3b90 sever. with one vm on there. I have a cisco 1700 router. and another watchgurd firewall. I have a vpn tunnel to my watchgurd firewall, to my cisco router. Site one works great. site two is having problems saving word documents and having problems printing in publisher 2007. Can someone please help?

  Read the article

• How to test TempDB performance?

  - by Matt Penner

  I'm getting some conflicting advice on how to best configure our SQL storage with our current SAN. I would like to do some of my own performance testing with a few different configurations. I looked at using SQLIOSim but it doesn't seem to simulate TempDB. Can anyone recommend a way to test data, log and TempDB performance? What about using a SQL profiler trace file from our production system? How would I use This to run against my test server? Thanks, Matt

  Read the article

• How much should a Systems Administrator be making?

  - by Curtis

  Hello, I'm a Sys Admin for a small (but successful and growing) company (~60 employees). I've got roughly 5-6 years of actual sys admin experience, plus another 5+ years of lower level work in the industry. I'm responsible for most everything above a helpdesk level in the company (server[windows]/network[cisco]/firewall/SAN[emc] setup/configuration/maintenance/troubleshooting), lead many projects, analyze system data -- I'm sure you've heard it all before...I have a bunch of certs, most are just "nice to have", but the ones that actually apply to my role are CCNA, MSCE, VCP (VMware). If things go wrong, I'm first in line to resolve the issue. I'm not management (no one reports to me). I've seen many of these sorts of questions online before, and I know the typical response is "too many variables, depends on location, industry type" etc etc. I'm just wondering (ballpark) what I should be looking for. I've tried to give as much detail as I can, but if I'm missing something, I'd be glad to post it. Thanks anyone.

  Read the article

• VmWare / Citrix Xen type environment vs Ubuntu Cloud / Amazon EC2 type environment.

  - by Nick Gorbikoff

  Hello. A bit of background. We run a small in house data center: about 20 virtualized servers (Debian Lenny, Windows 2003, Windows xp and Windows 7 machines), in a Citrix Xen pool running on 3 host servers and a SAN, plus a few standalone machines running legacy or specialized software that can't be vritualized. There is a big push everywhere now to move to cloud so we considering Ubuntu Cloud. I was wondering what are the pros / cons of running virtualized pool vs cloud to run all those machines? Thank you

  Read the article

• Flexible classroom environments (OS, Office)

  - by HannesFostie

  I work in the IT department of a training center, we still offer XP and Office 2003 trainings but also offer Vista and Win7 and Office 2007. Currently, we use VMs on VMware Server but this is obviously not a superb choice. We're thinking of implementing something like VDI (brainstorm phase, we hardly have any details) but I decided to check here if people would have some clever alternatives. Requirements: * Flexible when it comes to deployment * Centralized management would be a big plus * Allow for different software, whether they be compatible or not (all of office except for outlook can be installed simultaneously. for outlook you need to choose between 2003 or 2007) * Allow for different OS We have a big enough budget to implement a proper SAN environment to accomodate the virtualization of the solution, whatever kind it may be. A support contract will probably be necessary as well, because we need to be able to offer quick solutions to problems and with only 2 sysadmins that is simply impossible to guarantee.

  Read the article

• Folder/File permission transfer between alike file structure

  - by Tyler Benson

  So my company has recently upgraded to a new SAN but the person who copied all the data over must have done a drag n' drop or basic copy to move everything. Apparently Xcopy is not something he cared to use. So now I am left with the task of duplicating all the permissions over. The structure has changed a bit ( as in more files/folders have been added) but for the most part has been stayed unchanged. I'm looking for suggestions to help automate this process. Can I use XCopy to transfer ONLY permissions to one tree from another? Would i just ignore any folders/permissions that don't line up correctly? Thanks a ton in advance, Tyler

  Read the article

• Wildcard SSL Certificates with Exchange 2010?

  - by Hutch

  Is anyone using a Wildcard Cert with Exchange 2010 please? We currently have a bunch of individual whatever.domain.com SSL certificates and as several are expiring soon it would be an ideal opportunity to move to a wildcard certificate. At some point though we will be moving from Exchange 2003 to Exchange 2010, and I've read conflicting reports over whether wildcard certs work with Exchange 2010 as many guides seem to recommend a UCC/SAN certificate. Our internal DNS domain name is the same as our external domain name. Godaddy look like good VFM given they allow use on unlimited physical servers. Thanks in advance.

  Read the article

• Skipping hardlinks when using TSM Backup

  - by Lars Haugseth

  We need to backup a filesystem with lots of hardlinks. Since there are several hardlinks for each "true" file, we would like to skip all the hardlinks when backing up the filesystem to avoid n exact copies of each file. The backup is done using Tivoli Storage Manager Backup, and we've been unable to get it to treat hardlinks as anything other than separate files to be backed up alongside each other. In case it's relevant for possible solutions, I'd like to note that it's possible to tell a hardlink from a proper file by the filename: foobarbaz-123.ext # file foobarbaz-123-1.ext # hardlink foobarbaz-123-2.ext # hardlink barbazfoo-456.ext # file barbazfoo-456-1.ext # hardlink barbazfoo-456-2.ext # hardlink barbazfoo-456-3.ext # hardlink That is, all hardlinks have two hyphens in the filename, where as proper files have just the one. The server is running Ubuntu Linux, and the files are situated on a gfs volume on our SAN.

  Read the article

• Robocopy Mirror Backup gone awry

  - by Aznfin

  I have created a simple batch file script for running Robocopy. It is set to make a backup of my user account folder to my external hard drive. Here's the parameters for Robocopy: ROBOCOPY "C:\Users\Finnly" "F:\Backups\Finnly (Backup)" /ZB /COPY:DAT /DCOPY:T /MIR /256 /MT:32 /XF *.log *.log* *.dat *.tmp *.temp *.old "ntuser*" "SyncToy*" "UpgKit.txt" ".recently-used.xbel" /XD ".gimp-2.6" ".thumbnails" ".VirtualBox" "AppData" "Application Data" "Adobe" "Camtasia Studio" "Cookies" "CyberLink" "DivX Movies" "DVD Architect Pro 5.0 Projects" "dwhelper" "GTA San Andreas User Files" "Lightroom" "Local Settings" "NetHood" "PrintHood" "Scripts" "temp" "Templates" "The KMPlayer" "Tracing" /R:3 /W:10 /V /TS /FP /ETA /LOG+:F:\Backups\Sync.log /TEE For some reason when I run it, it backs up the files and then it seems to back them up again. The size of my user account directory is 18.3 GB but the backup of it occupies over 30 GB. After reading the contents of the log generated, it is obvious that it's copying files more than once. Why is this happening? I'm running Windows Seven Home Premium 64-bit.

  Read the article

• (simple) linux HA with vmware vsphere?

  - by derhelge

  I hope my upcoming question is specific enough, and you are able and willing to support :-) We have several openSUSE VMs in an ESX-Cluster (three ESX-Servers) with an attached iSCSI-SAN. All of those Linux VMs are "single point of failure"-configured, which means in the case of a Web-Server: LAMP, storage, etc. everything on this machine. This was very simple and in case of a failure (in the last years: kernel panics or apache crashes) a simple reboot triggered by a script did it. But the problem is: How to upgrade/maintain the w(eb-)application or the underlying OS without downtime? This wasn't really managable and i did this in the early morning ;) How can i achieve a "simple" High-Availability Cluster now? I thought of: DRBD with heartbeat with 2 VMs. And for the storage a RDM (raw device mapped) LUN and change the read-write-permissions for both VMs. Is this a good idea? Anyone has a better solution?

  Read the article

• Splitting CA component off puppet master

  - by Dennis LeMioux

  We are scaling our puppet infrastructure and would like to split off the CA component from the puppet master server to another server. Part of the change involves a servername change for the puppetmaster too. I'm no puppet expert but i'm at a point where I -think- we need to create a SAN cert with both the old and new names in it (to be safe), and then re-sign all the agent nodes all over again which is going to be a royal PITA. Is there a quicker/smarter way to do this? We already have hundreds of agent nodes out there and individually re-signing them will be an arduous task.

  Read the article

• Hyper-V Cluster with failover - NETWORKING

  - by Adam

  Hi We are looking to setup a 3 node Hyper-V cluster with live migration and failover using: 3 x Dell R710's with dual quad core Xeon & 128 GB RAM & 6 NICs in each 1 x Dell MD 3220i SAN We will be running this setup from a data center and so co-locating our kit. Can anybody explain how we should setup the network connections to make the system redundant? We have looked into this great article but are not sure how to get a 3 server setup correctly and reliably: http://faultbucket.ca/2011/01/hyper-v-failover-cluster-setup/. I believe we need network connections for: live migration, heartbeat, management, hyper-v etc. I assume as we are running it from a DC all IPs will have to be public IPs? Are AD servers will be VMs. One on each Hyper-V server and setup not to be HA.

  Read the article

< Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >