Search Results

Search found 28643 results on 1146 pages for 'go'.

Page 44/1146 | < Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >

• SQL SERVER – CXPACKET – Parallelism – Usual Solution – Wait Type – Day 6 of 28

  - by pinaldave

  CXPACKET has to be most popular one of all wait stats. I have commonly seen this wait stat as one of the top 5 wait stats in most of the systems with more than one CPU. Books On-Line: Occurs when trying to synchronize the query processor exchange iterator. You may consider lowering the degree of parallelism if contention on this wait type becomes a problem. CXPACKET Explanation: When a parallel operation is created for SQL Query, there are multiple threads for a single query. Each query deals with a different set of the data (or rows). Due to some reasons, one or more of the threads lag behind, creating the CXPACKET Wait Stat. There is an organizer/coordinator thread (thread 0), which takes waits for all the threads to complete and gathers result together to present on the client’s side. The organizer thread has to wait for the all the threads to finish before it can move ahead. The Wait by this organizer thread for slow threads to complete is called CXPACKET wait. Note that not all the CXPACKET wait types are bad. You might experience a case when it totally makes sense. There might also be cases when this is unavoidable. If you remove this particular wait type for any query, then that query may run slower because the parallel operations are disabled for the query. Reducing CXPACKET wait: We cannot discuss about reducing the CXPACKET wait without talking about the server workload type. OLTP: On Pure OLTP system, where the transactions are smaller and queries are not long but very quick usually, set the “Maximum Degree of Parallelism” to 1 (one). This way it makes sure that the query never goes for parallelism and does not incur more engine overhead. EXEC sys.sp_configure N'cost threshold for parallelism', N'1' GO RECONFIGURE WITH OVERRIDE GO Data-warehousing / Reporting server: As queries will be running for long time, it is advised to set the “Maximum Degree of Parallelism” to 0 (zero). This way most of the queries will utilize the parallel processor, and long running queries get a boost in their performance due to multiple processors. EXEC sys.sp_configure N'cost threshold for parallelism', N'0' GO RECONFIGURE WITH OVERRIDE GO Mixed System (OLTP & OLAP): Here is the challenge. The right balance has to be found. I have taken a very simple approach. I set the “Maximum Degree of Parallelism” to 2, which means the query still uses parallelism but only on 2 CPUs. However, I keep the “Cost Threshold for Parallelism” very high. This way, not all the queries will qualify for parallelism but only the query with higher cost will go for parallelism. I have found this to work best for a system that has OLTP queries and also where the reporting server is set up. Here, I am setting ‘Cost Threshold for Parallelism’ to 25 values (which is just for illustration); you can choose any value, and you can find it out by experimenting with the system only. In the following script, I am setting the ‘Max Degree of Parallelism’ to 2, which indicates that the query that will have a higher cost (here, more than 25) will qualify for parallel query to run on 2 CPUs. This implies that regardless of the number of CPUs, the query will select any two CPUs to execute itself. EXEC sys.sp_configure N'cost threshold for parallelism', N'25' GO EXEC sys.sp_configure N'max degree of parallelism', N'2' GO RECONFIGURE WITH OVERRIDE GO Read all the post in the Wait Types and Queue series. Additionally a must read comment of Jonathan Kehayias. Note: The information presented here is from my experience and I no way claim it to be accurate. I suggest you all to read the online book for further clarification. All the discussion of Wait Stats over here is generic and it varies from system to system. It is recommended that you test this on the development server before implementing on the production server. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: DMV, Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology

  Read the article

• SQL SERVER – Capturing Wait Types and Wait Stats Information at Interval – Wait Type – Day 5 of 28

  - by pinaldave

  Earlier, I have tried to cover some important points about wait stats in detail. Here are some points that we had covered earlier. DMV related to wait stats reset when we reset SQL Server services DMV related to wait stats reset when we manually reset the wait types However, at times, there is a need of making this data persistent so that we can take a look at them later on. Sometimes, performance tuning experts do some modifications to the server and try to measure the wait stats at that point of time and after some duration. I use the following method to measure the wait stats over the time. -- Create Table CREATE TABLE [MyWaitStatTable]( [wait_type] [nvarchar](60) NOT NULL, [waiting_tasks_count] [bigint] NOT NULL, [wait_time_ms] [bigint] NOT NULL, [max_wait_time_ms] [bigint] NOT NULL, [signal_wait_time_ms] [bigint] NOT NULL, [CurrentDateTime] DATETIME NOT NULL, [Flag] INT ) GO -- Populate Table at Time 1 INSERT INTO MyWaitStatTable ([wait_type],[waiting_tasks_count],[wait_time_ms],[max_wait_time_ms],[signal_wait_time_ms], [CurrentDateTime],[Flag]) SELECT [wait_type],[waiting_tasks_count],[wait_time_ms],[max_wait_time_ms],[signal_wait_time_ms], GETDATE(), 1 FROM sys.dm_os_wait_stats GO ----- Desired Delay (for one hour) WAITFOR DELAY '01:00:00' -- Populate Table at Time 2 INSERT INTO MyWaitStatTable ([wait_type],[waiting_tasks_count],[wait_time_ms],[max_wait_time_ms],[signal_wait_time_ms], [CurrentDateTime],[Flag]) SELECT [wait_type],[waiting_tasks_count],[wait_time_ms],[max_wait_time_ms],[signal_wait_time_ms], GETDATE(), 2 FROM sys.dm_os_wait_stats GO -- Check the difference between Time 1 and Time 2 SELECT T1.wait_type, T1.wait_time_ms Original_WaitTime, T2.wait_time_ms LaterWaitTime, (T2.wait_time_ms - T1.wait_time_ms) DiffenceWaitTime FROM MyWaitStatTable T1 INNER JOIN MyWaitStatTable T2 ON T1.wait_type = T2.wait_type WHERE T2.wait_time_ms > T1.wait_time_ms AND T1.Flag = 1 AND T2.Flag = 2 ORDER BY DiffenceWaitTime DESC GO -- Clean up DROP TABLE MyWaitStatTable GO If you notice the script, I have used an additional column called flag. I use it to find out when I have captured the wait stats and then use it in my SELECT query to SELECT wait stats related to that time group. Many times, I select more than 5 or 6 different set of wait stats and I find this method very convenient to find the difference between wait stats. In a future blog post, we will talk about specific wait stats. Read all the post in the Wait Types and Queue series. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL DMV, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology

  Read the article

• SQL SERVER – Introduction to FIRST _VALUE and LAST_VALUE – Analytic Functions Introduced in SQL Server 2012

  - by pinaldave

  SQL Server 2012 introduces new analytical functions FIRST_VALUE() and LAST_VALUE(). This function returns first and last value from the list. It will be very difficult to explain this in words so I’d like to attempt to explain its function through a brief example. Instead of creating a new table, I will be using the AdventureWorks sample database as most developers use that for experiment purposes. Now let’s have fun following query: USE AdventureWorks GO SELECT s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty, FIRST_VALUE(SalesOrderDetailID) OVER (ORDER BY SalesOrderDetailID) FstValue, LAST_VALUE(SalesOrderDetailID) OVER (ORDER BY SalesOrderDetailID) LstValue FROM Sales.SalesOrderDetail s WHERE SalesOrderID IN (43670, 43669, 43667, 43663) ORDER BY s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty GO The above query will give us the following result: What’s the most interesting thing here is that as we go from row 1 to row 10, the value of the FIRST_VALUE() remains the same but the value of the LAST_VALUE is increasing. The reason behind this is that as we progress in every line – considering that line and all the other lines before it, the last value will be of the row where we are currently looking at. To fully understand this statement, see the following figure: This may be useful in some cases; but not always. However, when we use the same thing with PARTITION BY, the same query starts showing the result which can be easily used in analytical algorithms and needs. Let us have fun through the following query: Let us fun following query. USE AdventureWorks GO SELECT s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty, FIRST_VALUE(SalesOrderDetailID) OVER (PARTITION BY SalesOrderID ORDER BY SalesOrderDetailID) FstValue, LAST_VALUE(SalesOrderDetailID) OVER (PARTITION BY SalesOrderID ORDER BY SalesOrderDetailID) LstValue FROM Sales.SalesOrderDetail s WHERE SalesOrderID IN (43670, 43669, 43667, 43663) ORDER BY s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty GO The above query will give us the following result: Let us understand how PARTITION BY windows the resultset. I have used PARTITION BY SalesOrderID in my query. This will create small windows of the resultset from the original resultset and will follow the logic or FIRST_VALUE and LAST_VALUE in this resultset. Well, this is just an introduction to these functions. In the future blog posts we will go deeper to discuss the usage of these two functions. By the way, these functions can be applied over VARCHAR fields as well and are not limited to the numeric field only. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Function, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• SQL SERVER – How to Force New Cardinality Estimation or Old Cardinality Estimation

  - by Pinal Dave

  After reading my initial two blog posts on New Cardinality Estimation, I received quite a few questions. Once I receive this question, I felt I should have clarified it earlier few things when I started to write about cardinality. Before continuing this blog, if you have not read it before I suggest you read following two blog posts. SQL SERVER – Simple Demo of New Cardinality Estimation Features of SQL Server 2014 SQL SERVER – Cardinality Estimation and Performance – SQL in Sixty Seconds #072 Q: Does new cardinality will improve performance of all of my queries? A: Remember, there is no 0 or 1 logic when it is about estimation. The general assumption is that most of the queries will be benefited by new cardinality estimation introduced in SQL Server 2014. That is why the generic advice is to set the compatibility level of the database to 120, which is for SQL Server 2014. Q: Is it possible that after changing cardinality estimation to new logic by setting the value to compatibility level to 120, I get degraded performance for few queries? A: Yes, it is possible. However, the number of the queries where this impact should be very less. Q: Can I still run my database in older compatibility level and force few queries to newer cardinality estimation logic? If yes, How? A: Yes, you can do that. You will need to force your query with trace flag 2312 to use newer cardinality estimation logic. USE AdventureWorks2014 GO -- Old Cardinality Estimation ALTER DATABASE AdventureWorks2014 SET COMPATIBILITY_LEVEL = 110 GO -- Using New Cardinality Estimation SELECT [AddressID],[AddressLine1],[City] FROM [Person].[Address] OPTION(QUERYTRACEON 2312);; -- Using Old Cardinality Estimation SELECT [AddressID],[AddressLine1],[City] FROM [Person].[Address]; GO Q: Can I run my database in newer compatibility level and force few queries to older cardinality estimation logic? If yes, How? A: Yes, you can do that. You will need to force your query with trace flag 9481 to use newer cardinality estimation logic. USE AdventureWorks2014 GO -- NEW Cardinality Estimation ALTER DATABASE AdventureWorks2014 SET COMPATIBILITY_LEVEL = 120 GO -- Using New Cardinality Estimation SELECT [AddressID],[AddressLine1],[City] FROM [Person].[Address]; -- Using Old Cardinality Estimation SELECT [AddressID],[AddressLine1],[City] FROM [Person].[Address] OPTION(QUERYTRACEON 9481); GO I guess, I have covered most of the questions so far I have received. If I have missed any questions, please send me again and I will include the same. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

  Read the article

• Downloading stuff from Oracle: an example

  - by user12587121

  Introduction Oracle has a lot of software on offer.  Components of the stack can evolve at different rates and different versions of the components may be in use at any given time.  All this means that even the process of downloading the bits you need can be somewhat daunting.  Here, by way of example, and hopefully to convince you that there is method in the downloading madness,  we describe how to go about downloading the bits for Oracle Identity Manager  (OIM) 11.1.1.5.Firstly, a couple of preliminary points: Folks with Oracle products already installed and looking for bug fixes, patch bundles or patch sets would go directly to the Oracle support website. This Oracle document is a comprehensive description of the Oracle FMW download process and the licensing that applies to downloaded software.   Downloading Oracle Identity Manager 11.1.1.5     To be sure we download the right versions, first locate the Certification Matrix for OIM 11.1.1.5: first go to the Fusion Certification Page then go to the “System Requirements and Supported Platforms for Oracle Identity and Access Management 11gR1” link. Let’s assume you have a 64 bit Linux Machine and an Oracle database already.  Then our  goal is to end up with a list of files like the following: jdk-6u29-linux-x64.bin                    (Java JDK)V26017-01.zip                             (the Repository Creation Utility to create the DB schemas)wls1035_generic.jar                       (the Weblogic Application Server)ofm_iam_generic_11.1.1.5.0_disk1_1of1.zip (the Identity Managament bits)ofm_soa_generic_11.1.1.5.0_disk1_1of2.zip (the SOA bits)ofm_soa_generic_11.1.1.5.0_disk1_2of2.zip jdevstudio11115install.exe                (optional: JDeveloper IDE)soa-jdev-extension.zip                    (optional: SOA extensions for JDeveloper) Downloading the bits 1.    Download the Java JDK, 64 bit version 1.6.0_24+.2.    Download the RCU: here you will see that the RCU is mentioned on the Identity Management home page but no link is provided.  Do not panic.  Due to the amount and turnover of software available only the latest versions are available for download from the main Oracle site.  Over time software gets moved on to the Oracle edelivery site and it is here that we find the RCU version we require: a.    Go to edelivery: https://edelivery.oracle.com b.    Choose Pack ‘ Oracle Fusion Middleware’ and ‘Linux x86-64’ c.    Click on ‘Oracle Fusion Middleware 11g Media Pack for Linux x86-64’ d.    Download: ‘Oracle Fusion Middleware Repository Creation Utility 11g (11.1.1.5.0) for Linux x86’ (V26017.zip) 3.    Download the Weblogic Application Server: WLS 10.3.54.    Download the Oracle Identity Manager bits: one point to clarify here is that currently  the Identity Management bits come in two trains, essentially one for the Directory Services piece and the other for the Access Management and Identity Management parts.  We need to be careful not to confuse the two, in particular to be clear which of the trains is being referred to by  the documentation: a.   So, with this in mind, go to ‘ Oracle Identity and Access Management (11.1.1.5.0)’ and download Disk1. 5.    Download the SOA bits: a.    Go to the edelivery area as for the RCU and download: i.    Oracle SOA Suite 11g Patch Set 4 (11.1.1.5.0) (Part 1 of 2) ii.    Oracle SOA Suite 11g Patch Set 4 (11.1.1.5.0) (Part 2 of 2) 6.    You will want to download some development tooling (for plugins or BPEL workflow development): a.    Download Jdeveloper 11.1.1.5 (11.1.1.6 may work but best to stick to the versions that correspond to the WLS version we are using) b.    Go to the site for  SOA tools and download the SOA Composite Editor 11.1.1.5 That’s it, you may proceed to the installation. 

  Read the article

• SQL SERVER – Working with FileTables in SQL Server 2012 – Part 2 – Methods to Insert Data Into Table

  - by pinaldave

  Read Part 1 Working with FileTables in SQL Server 2012 – Part 1 – Setting Up Environment In this second part of the series, we will see how we can insert the files into the FileTables. There are two methods to insert the data into FileTables: Method 1: Copy Paste data into the FileTables folder First, find the folder where FileTable will be storing the files. Go to Databases >> Newly Created Database (FileTableDB) >> Expand Tables. Here you will see a new folder which says “FileTables”. When expanded, it gives the name of the newly created “FileTableTb”. Right click on the newly created table, and click on “Explore FileTable Directory”. This will open up the folder where the FileTable data will be stored. When clicked on the option it will open up following folder in my local machine where the FileTable data will be stored. \\127.0.0.1\mssqlserver\FileTableDB\FileTableTb_Dir You can just copy your document just there. I copied few word document there and ran select statement to see the result. USE [FileTableDB] GO SELECT * FROM FileTableTb GO SELECT * returns all the rows. Here is SELECT statement which has only few columns selected from FileTable. SELECT [name] ,[file_type] ,CAST([file_stream] AS VARCHAR) FileContent ,[cached_file_size] ,[creation_time] ,[last_write_time] ,[last_access_time] FROM [dbo].[FileTableTb] GO I believe this is the simplest method to populate FileTable, because you just have to move the files to the specific table. Method 2: T-SQL Insert Statement There are always cases when you might want to programmatically insert the images into SQL Server File table. Here is a quick method which you can use to insert the data in the file table. I have inserted a very small text file using T-SQL, and later on, reading that using SELECT statement demonstrated in method 1 above. INSERT INTO [dbo].[FileTableTb] ([name],[file_stream]) SELECT 'NewFile.txt', * FROM OPENROWSET(BULK N'd:\NewFile.txt', SINGLE_BLOB) AS FileData GO The above T-SQL statement will copy the NewFile.txt to new location. When you run SELECT statement, it will retrieve the file and list in the resultset. Additionally, it returns the content in the SELECT statement as well. I think it is a pretty interesting way to insert the data into the FileTable. SELECT [name] ,[file_type] ,CAST([file_stream] AS VARCHAR) FileContent ,[cached_file_size] ,[creation_time] ,[last_write_time] ,[last_access_time] FROM [dbo].[FileTableTb] GO There are more to FileTable and we will see those in my future blog posts. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: Filestream

  Read the article

• Increasing deadlocks with NoLock

  - by Dave Ballantyne

  One on my personnel pet issues is with inappropriate use of the NOLOCK hint (and read uncommitted) .  Dont get me wrong, I have used it in exceptional circumstances , but as a general statement it is a bad thing.  Mostly , when NOLOCK, is used the discussion is around a single statement,  “it runs faster with nolock for XYZ reason”,  however ,IMO, this is quite a shorted sighted view.  What about the Transaction ? What about other concurrent users ?  What is good for one statement in isolation , does not mean that it is good for the system as a whole.  I have seen on a number of occasions deadlocks happen, when tasks that would of(and should of) be blocked continue to execute, only for a deadlock to occur at a later data writing (INSERT,UPDATE,DELETE) statement.  Writers will block writers regardless of isolation level. By Way of (fairly contrived ) example , lets generate some dummy tables and populate with some data drop table a go drop table b go Create Table a ( col1 integer ) go insert into a values(1) insert into a values(2) go Create Table b ( col1 integer ) go insert into b values(1) insert into b values(2) go   Now make two connections. In connection one execute set transaction isolation level read committed BEGIN TRAN Select * from a Select * from b delete from a In connection two execute set transaction isolation level read committed BEGIN TRAN Select * from a Select * from b delete from b Right now the ‘select from a’ in connection two is being blocked by the ‘delete from a’ in connection one.  This is ,IMO, quite a healthy and natural thing to be happening , some see this as a ‘slow down’, a drop in performance.  So, lets reach for our ‘NOLOCK’ magic pill.  Cancel the blocked query and ROLLBACK both transactions, then in connection one execute set transaction isolation level read uncommitted BEGIN TRAN Select * from a Select * from b delete from b and then in connection two execute set transaction isolation level read uncommitted BEGIN TRAN Select * from a Select * from b delete from a We have now solved out performance problem , no more blocking.  Lets finish the work required by the transaction, in connection one , execute delete from a Oh, ‘ performance problem’ again , its now being blocked. Still, lets complete the work in connection two…. delete from b DEADLOCK!!  It is important to be clear about the role of the select statements.  They do not participate within the deadlock, but are preventing code executing that would of.   Additionally, without the select readers to block, a deadlock would occur on the deletes with READ COMMITTED. Naturally, other isolation levels will exhibit different behaviour as to where and when they will and wont block,  and I would encourage you to read BOL and satisfy yourself that you really do NEED to NOLOCK.

  Read the article

• SQL SERVER – Validating Spatial Object with IsValidDetailed Function

  - by pinaldave

  What do you prefer – error or warning indicating error may happen with the reason for the error. While writing the previous statement I remember the movie “Minory Report”. This blog post is not about minority report but I will still cover the concept in a single statement “Let us predict the future and prevent the crime which is about to happen in future”. (Please feel free to correct me if I am wrong about the movie concept, I really do not want to hurt your sentiment if you are dedicated fan). Let us switch to the SQL Server world. Spatial data types are interesting concepts. I love writing about spatial data types because it allows me to be creative with shapes (just like toddlers). When working with Spatial Datatypes it is all good when the spatial object works fine. However, when the spatial object has issue or it is created with invalid coordinates it used to give a simple error that there is an issue with the object but did not provide much information. This made it very difficult to debug. If this spatial object was used in the big procedure and while this big procedural error out because of the invalid spatial object, it is indeed very difficult to debug it. I always wished that the more information provided regarding what is the problem with spatial datatype. SQL Server 2012 has introduced the new function IsValidDetailed(). This function has made my life very easy. In simple words this function will check if the spatial object passed is valid or not. If it is valid it will give information that it is valid. If the spatial object is not valid it will return the answer that it is not valid and the reason for the same. This makes it very easy to debug the issue and make the necessary correction. DECLARE @p GEOMETRY = 'Polygon((2 2, 6 6, 4 2, 2 2))' SELECT @p.IsValidDetailed() GO DECLARE @p GEOMETRY = 'Polygon((2 2, 3 3, 4 4, 5 5, 6 6, 2 2))' SELECT @p.IsValidDetailed() GO DECLARE @p GEOMETRY = 'Polygon((2 2, 4 4, 4 2, 2 3, 2 2))' SELECT @p.IsValidDetailed() GO DECLARE @p GEOMETRY = 'CIRCULARSTRING(2 2, 4 4, 0 0)' SELECT @p.IsValidDetailed() GO DECLARE @p GEOMETRY = 'CIRCULARSTRING(2 2, 4 4, 0 0)' SELECT @p.IsValidDetailed() GO DECLARE @p GEOMETRY = 'LINESTRING(2 2, 4 4, 0 0)' SELECT @p.IsValidDetailed() GO Here is the resultset of the above query. You can see any valid query and some invalid query. If the query is invalid it also demonstrates the reason along with the error message. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: Spatial Database, SQL Spatial

  Read the article

• Scale a game object to Bounds

  - by Spikeh

  I'm trying to scale a lot of dynamically created game objects in Unity3D to the bounds of a sphere collider, based on the size of their current mesh. Each object has a different scale and mesh size. Some are bigger than the AABB of the collider, and some are smaller. Here's the script I've written so far: private void ScaleToCollider(GameObject objectToScale, SphereCollider sphere) { var currentScale = objectToScale.transform.localScale; var currentSize = objectToScale.GetMeshHierarchyBounds().size; var targetSize = (sphere.radius * 2); var newScale = new Vector3 { x = targetSize * currentScale.x / currentSize.x, y = targetSize * currentScale.y / currentSize.y, z = targetSize * currentScale.z / currentSize.z }; Debug.Log("{0} Current scale: {1}, targetSize: {2}, currentSize: {3}, newScale: {4}, currentScale.x: {5}, currentSize.x: {6}", objectToScale.name, currentScale, targetSize, currentSize, newScale, currentScale.x, currentSize.x); //DoorDevice_meshBase Current scale: (0.1, 4.0, 3.0), targetSize: 5, currentSize: (2.9, 4.0, 1.1), newScale: (0.2, 5.0, 13.4), currentScale.x: 0.125, currentSize.x: 2.869114 //RedControlPanelForAirlock_meshBase Current scale: (1.0, 1.0, 1.0), targetSize: 5, currentSize: (0.0, 0.3, 0.2), newScale: (147.1, 16.7, 25.0), currentScale.x: 1, currentSize.x: 0.03400017 objectToScale.transform.localScale = newScale; } And the supporting extension method: public static Bounds GetMeshHierarchyBounds(this GameObject go) { var bounds = new Bounds(); // Not used, but a struct needs to be instantiated if (go.renderer != null) { bounds = go.renderer.bounds; // Make sure the parent is included Debug.Log("Found parent bounds: " + bounds); //bounds.Encapsulate(go.renderer.bounds); } foreach (var c in go.GetComponentsInChildren<MeshRenderer>()) { Debug.Log("Found {0} bounds are {1}", c.name, c.bounds); if (bounds.size == Vector3.zero) { bounds = c.bounds; } else { bounds.Encapsulate(c.bounds); } } return bounds; } After the re-scale, there doesn't seem to be any consistency to the results - some objects with completely uniform scales (x,y,z) seem to resize correctly, but others don't :| Its one of those things I've been trying to fix for so long I've lost all grasp on any of the logic :| Any help would be appreciated!

  Read the article

• SQL SERVER – Grouping by Multiple Columns to Single Column as A String

  - by pinaldave

  One of the most common questions I receive in email is how to group multiple column data in comma separate values in a single row grouping by another column. I have previously blogged about it in following two blog posts. However, both aren’t addressing the following exact problem. Comma Separated Values (CSV) from Table Column Comma Separated Values (CSV) from Table Column – Part 2 The question comes in many different formats but in following image I am demonstrating the same question in simple words. This is the most popular question on my Facebook page as well. (Example) Here is the sample script to build the sample dataset. CREATE TABLE TestTable (ID INT, Col VARCHAR(4)) GO INSERT INTO TestTable (ID, Col) SELECT 1, 'A' UNION ALL SELECT 1, 'B' UNION ALL SELECT 1, 'C' UNION ALL SELECT 2, 'A' UNION ALL SELECT 2, 'B' UNION ALL SELECT 2, 'C' UNION ALL SELECT 2, 'D' UNION ALL SELECT 2, 'E' GO SELECT * FROM TestTable GO Here is the solution which will build an answer to the above question. -- Get CSV values SELECT t.ID, STUFF( (SELECT ',' + s.Col FROM TestTable s WHERE s.ID = t.ID FOR XML PATH('')),1,1,'') AS CSV FROM TestTable AS t GROUP BY t.ID GO I hope this is an easy solution. I am going to point to this blog post in the future for all the similar questions. Final Clean Up Act -- Clean up DROP TABLE TestTable GO Here is the question back to you - Is there any better way to write above script? Please leave a comment and I will write a separate blog post with due credit. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: SQL XML

  Read the article

• Adding Column to a SQL Server Table

  - by Dinesh Asanka

  Adding a column to a table is  common task for  DBAs. You can add a column to a table which is a nullable column or which has default values. But are these two operations are similar internally and which method is optimal? Let us start this with an example. I created a database and a table using following script: USE master Go --Drop Database if exists IF EXISTS (SELECT 1 FROM SYS.databases WHERE name = 'AddColumn') DROP DATABASE AddColumn --Create the database CREATE DATABASE AddColumn GO USE AddColumn GO --Drop the table if exists IF EXISTS ( SELECT 1 FROM sys.tables WHERE Name = 'ExistingTable') DROP TABLE ExistingTable GO --Create the table CREATE TABLE ExistingTable (ID BIGINT IDENTITY(1,1) PRIMARY KEY CLUSTERED, DateTime1 DATETIME DEFAULT GETDATE(), DateTime2 DATETIME DEFAULT GETDATE(), DateTime3 DATETIME DEFAULT GETDATE(), DateTime4 DATETIME DEFAULT GETDATE(), Gendar CHAR(1) DEFAULT 'M', STATUS1 CHAR(1) DEFAULT 'Y' ) GO -- Insert 100,000 records with defaults records INSERT INTO ExistingTable DEFAULT VALUES GO 100000 Before adding a Column Before adding a column let us look at some of the details of the database. DBCC IND (AddColumn,ExistingTable,1) By running the above query, you will see 637 pages for the created table. Adding a Column You can add a column to the table with following statement. ALTER TABLE ExistingTable Add NewColumn INT NULL Above will add a column with a null value for the existing records. Alternatively you could add a column with default values. ALTER TABLE ExistingTable Add NewColumn INT NOT NULL DEFAULT 1 The above statement will add a column with a 1 value to the existing records. In the below table I measured the performance difference between above two statements. Parameter Nullable Column Default Value CPU 31 702 Duration 129 ms 6653 ms Reads 38 116,397 Writes 6 1329 Row Count 0 100000 If you look at the RowCount parameter, you can clearly see the difference. Though column is added in the first case, none of the rows are affected while in the second case all the rows are updated. That is the reason, why it has taken more duration and CPU to add column with Default value. We can verify this by several methods. Number of Pages The number of data pages can be obtained by using DBCC IND command. Though, this an undocumented dbcc command, many experts are ok to use this command in production. However, since there is no official word from Microsoft, use this “at your own risk”. DBCC IND (AddColumn,ExistingTable,1) Before Adding the Columns 637 Adding a Column with NULL 637 Adding a column with DEFAULT value 1270 This clearly shows that pages are physically modified. Please note, a high value indicated in the Adding a column with DEFAULT value  column is also a result of page splits. Continues…

  Read the article

• How much effort should you put into a junior developer?

  - by Crazy Eddie

  At what point should one give up? I've tried helping them out by having them shadow me. We agree to break a minute, and then they go missing in action for a while...then just go back to their desk. Even when I know they've done this, part of me feels like I shouldn't have to go get them but that they should be showing interest in learning. Frankly, it's a bunch of time I don't have explaining things as I go when I could just do it. Am I expecting too much to expect that if they want to learn they'll make sure I know they're ready and willing? They go to meetings that they where not told they had to, good, but then sit in the corner and sleep...bad. I don't even know what to do with that. Sometimes I give them something small to do and they do it great, so I give them something just a touch harder and they totally fail, hard. Check in things without testing them. Part of me thinks that maybe I should be spending more time with them but at the same time I don't see a lot of interest and I really, honestly don't have time teaching the same things over and over. Sometimes I get asked questions that are really, really easy to answer if you just do a little bit of your own work trying to find out. Other times I'm not asked anything. I'm sure I could be doing better but honestly...I don't really want to anymore.

  Read the article

• 2010 Sloan Research Fellowships Announced

  16 fellowships go to computer scientists United States - Education - Colleges and Universities - Research - California

  Read the article

• How does a game developer get feedback from gamers (not developers) or start a forum community without paying for advertising or hiring Q&A teams?

  - by Carter81

  I am familiar with a lot of game developer forums, but I'd assume this is much less likely to attract more casual commentators. I also fear that feedback from a gamer's perspective would often be tainted by their game dev perspective. For example, if I were making a RTS game and wanted to get feedback from "The RTS gamers" where would I go? Is there a general idea of what type of website or forum to go to? Do you go to specific game websites, to try to "steal" attention? Would this not equate to spam or inappropriate posting? What is considered appropriate and inappropriate? I am not asking for specifics. I am asking how one "starts a community", or how one "gets feedback from gamers" without resorting to spamming forums or 'advertising' just to see what sticks. What TYPE OF PLACE does one go? Are there already sites designed for this purpose? I tried going to what was once a very popular forum for feedback from what I believed was a niche hardcore group of gamers in the genre, but its popularity seemed to have died significantly; Leaving only trolls and very young teenagers. The resulting feedback was quite disappointing, mainly for how little feedback it resulted. Many years ago, feedback would flood in by the hundreds so quickly. Without this website, I am at a loss as to where to go to see what people think of ideas, gather feedback from a gamer's perspective (not a developer's perspective), or where to pull from to start my own site's forum. I am out of ideas of what to do, short of going to various game forums to post in the off-topic sections there.

  Read the article

• How do bug reports factor in to a sprint?

  - by Mark Ingram

  I've been reading up on Scrum recently. From my understanding, a meeting is held before the sprint starts, to decide what gets moved from the product backlog to the upcoming sprint backlog. Once a feature is completed in the current sprint, it will go into the "Ready to QA" bucket, and it's at this point that I'm getting confused. Do bug reports go back into the product backlog? I assume they can't go back into the sprint backlog as we've already decided what work will be done for this cycle? What happens when QA finds a bug? Where does it go?

  Read the article

• What alternatives exist of how an agent can follow the path calculated by a path-finding algorithm?

  - by momboco

  What alternatives exist of how an agent can follow the path calculated by a path-finding algorithm? I've seen that the most easy form is go to one point and when the agent has reached this point, discard it and go to the next point. I think that this approach has problems when the game has physics with dynamic objects that can block the travel between point A and point B, then the agent is taken from his original trayectory and sometimes go to the last destiny point is not the most natural behavior. In the literature always I have read that the path is only a suggestion of where the agent has to go, but I don't know how this suggested path must be followed. Thanks.

  Read the article

• Build Your Own NAS Device

  How to go about buildingyour own NAS device

  Read the article

• Clear Windows Extension for JDeveloper 11g

  Clear running server log, compiler log and message pane at one go

  Read the article

• What You Said: How You Deal with Bacn

  - by Jason Fitzpatrick

  Earlier this week we asked you how you deal with Bacn—email you want, but not right now—and you responded. Read on to see the three principle ways HTG readers deal with Bacn. The approach you all took fell into three distinct categories: Filtering, Obfuscating, and Procrastinating. Readers like Ray and jigglypuff use filters: I use Thunderbird as my email client. I have different folders that I filter the email I receive into. The newsletters and other subscribed emails go into a lower priority folder. One word: Filters. I just setup filters for all of this type of mail. Some I let go to inbox, others I let go straight to a folder without seeing it first. Then when I have time or want to go through them, I do. HTG Explains: Is ReadyBoost Worth Using? HTG Explains: What The Windows Event Viewer Is and How You Can Use It HTG Explains: How Windows Uses The Task Scheduler for System Tasks

  Read the article

• Le prix de l'abonnement Internet en fonction de la consommation réelle serait envisagé, vers une fin des offres illimitées ?

  France : Le forfait internet au Go fixe est un scénario envisageable, bientôt la fin des offres illimitées ?Dans les prochains mois, il n'est pas exclu de voir se mettre en place une nouvelle législation autour de la facturation internet comme c'est déjà le cas en Allemagne où les forfaits dans le fixe sont déjà segmentés en fonction des protocoles (P2P, VoIP?) ou de la consommation générale.Depuis le mois d'avril dernier, Deutsche Telekom, l'opérateur principal en Allemagne, a en effet déjà imposé à ses nouveaux clients xDSL et fibre des quotas. Passé un certain seuil (75 Go pour les abonnés ADSL, 200 Go pour le VDSL, 300/400 Go pour les abonnés FTTH), les abonnés voient désormais leur débit sombrer à que...

  Read the article

• Advice needed on Process - Service Design

  - by user99314

  Need some advice from experts on designing a flow. Create a service that will read a csv file which may contain anywhere over 6000+ rows of individual ids as shown in the sample below. Need to read that file and go to oracle database and fetch a vname,vnumber,vid of each id in the csv and then go to document repository i.e. Oracle UCM and download all documents matching vname,vnumber,vid there can be =0 documents for each vname,vnumber,vid and save them on a file system. UCM exposes a webservice to dowload the documents. Finally create a new csv appending the filenames that are downloaded for each id. Need to keep track of any errors but need to make sure to go over the whole ids in the csv to download the documents and skip in case of errors. Need some advice on how to go about designing this as there may be over 6000+ rows in a csv file and looping it and hitting the database for each individual id and then hitting a UCM may be a bit expensive so open for any idea. How to go by designing this solution. Wondering if messaging can be helpful here or offloading process of getting the vname,vnumber,vid to pl/sql packages, creating staging tables etc. Initial csv that contains ids: **ID** 12345a 12s345 3456fr we9795 we9797 Final csv output: **ID Files Downloaded from UCM** 12345a a.pdf,b.doc,d.txt 12s345 a1.pdf,s2.pdf,f4.gif 3456fr b.xls we9795 we9797 x.doc Thanks

  Read the article

• Delete trigger does not catch table truncation

  - by Tomaz.tsql

  Sample shows table truncation will not fire delete trigger. USE AdventureWorks; GO -- STAGING IF EXISTS (SELECT * FROM sys.objects WHERE name = 'est_del_trigger_log' AND type = 'U') DROP TABLE test_del_trigger_log; GO IF EXISTS (SELECT * FROM sys.objects WHERE name = 'est_del_trigger' AND type = 'U') DROP TABLE test_del_trigger; GO CREATE TABLE test_del_trigger (id INT IDENTITY(1,1) ,tkt VARCHAR(10) CONSTRAINT pk_test_del_trigger PRIMARY KEY (id) ); GO INSERT INTO...(read more)

  Read the article

• Google présente son smartphone le Moto X et vante ses multiples options de personnalisation, ainsi que son autonomie record

  Avec le rachat de Motorola, on se doutait que Google allait sortir sa propre version de smartphone, mais avec la récente gamme de Nexus partagée entre Samsung (Nexus 10), LG (Nexus 4) et Asus (Nexus 7) on pouvait se demander s'il allait vraiment le faire.Après plusieurs rumeurs, le smartphone Moto X est enfin dévoilé et promet plein de surprises.Le dispositif bien évidemment repose sur Android 4.2.2 et est fièrement propulsé par une puce Snapdragon S4 Pro de 1.7 GHz, soutenue par une mémoire vive de 2 Go. Les utilisateurs auront le choix entre le modèle de 16 Go ou 32 Go, extensible par un espace de stockage gratuit de 50 Go sur Google Drive.Le smartphone est doté d'un écran de 4,7 pouces AMOLED haute définition de 720p et est accompagné d'un appareil photo a...

  Read the article

• Code for Controlling the Bike in a bike game

  - by user1489257

  I'm new(ish) to Actionscript 3 and I was wondering what the code what would be like for controlling the bike in a game. I have a two main questions: Is Box2D the best physics engine to go with for this type of game? How would the animation of the bike work. Would I have to create a bike animation of the wheels moving and make it start and stop when the key to go forward is pressed. How would I go about it slowly stopping when the key to go forward is released? Thanks.

  Read the article

• Algorithm to get through a maze

  - by Sam

  Hello, We are currently programming a game (its a pretty unknown language: modula 2), And the problem we encountered is the following: we have a maze (not a perfect maze) in a 17 x 12 grid. The computer has to generate a way from the starting point (9, 12) to the end point (9, 1). I found some algorithms but they dont work when the robot has to go back: xxxxx x => x x xxx or: xxxxx x xxxxxx x x x x x xxxxxx x => x xxxxxxxxx I found a solution for the first example type but then the second type couldn't be solved and the solution I made up for the second type would cause the robot to get stuck in the first type of situation. It's a lot of code so i'll give the idea: WHILE (end destination not reached) DO { try to go right, if nothing blocks you: go right if you encounter a block, try up until you can go right, if you cant go up anymore try going down until you can go right, (starting from the place you first were blocked), if you cant go down anymore, try one step left and fill the spaces you tested with blocks. } This works for the first type of problem ... not for the second one. Now it could be that i started wrong so i am open for better algorithms or solutions specificaly to how i could improve my algorithm. Thanks a lot!!

  Read the article

< Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >