Search Results

Search found 2093 results on 84 pages for 'logical'.

Page 44/84 | < Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >

• Kingston SD reader not working for USB3

  - by user1146334

  I have a Kingston 4-in-1 Multimedia reader. When my PC was formatted with Win7 it worked fine. I decided to change to Ubuntu 14.04 and now it doesn't work. If I plug it into one of the USB2 ports it works fine, but whenever I plug it into one of the USB3 ports, it thinks about it for a minute and then dies. Here's the output of dmesg when it dies [110262.148656] usb 4-1: new SuperSpeed USB device number 3 using xhci_hcd [110262.170330] usb 4-1: Parent hub missing LPM exit latency info. Power management will be impacted. [110262.266379] usb 4-1: New USB device found, idVendor=11b0, idProduct=6348 [110262.266386] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [110262.266390] usb 4-1: Product: USB3.0 Media Reader [110262.266394] usb 4-1: Manufacturer: Kingston [110262.266398] usb 4-1: SerialNumber: 08735314400198 [110262.272929] usb-storage 4-1:1.0: USB Mass Storage device detected [110262.273239] scsi15 : usb-storage 4-1:1.0 [110263.290056] scsi 15:0:0:0: Direct-Access FCR-HS3 -0 1.00 PQ: 0 ANSI: 4 [110263.306622] scsi 15:0:0:1: Direct-Access FCR-HS3 -1 1.00 PQ: 0 ANSI: 4 [110263.323292] scsi 15:0:0:2: Direct-Access FCR-HS3 -2 1.00 PQ: 0 ANSI: 4 [110263.339858] scsi 15:0:0:3: Direct-Access FCR-HS3 -3 1.00 PQ: 0 ANSI: 4 [110263.340332] sd 15:0:0:0: Attached scsi generic sg3 type 0 [110263.340706] sd 15:0:0:1: Attached scsi generic sg4 type 0 [110263.340850] sd 15:0:0:2: Attached scsi generic sg5 type 0 [110263.340975] sd 15:0:0:3: Attached scsi generic sg6 type 0 [110264.651847] sd 15:0:0:1: [sde] 31116288 512-byte logical blocks: (15.9 GB/14.8 GiB) [110264.667049] sd 15:0:0:1: [sde] Write Protect is off [110264.667055] sd 15:0:0:1: [sde] Mode Sense: 2f 00 00 00 [110264.682767] sd 15:0:0:1: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [110264.694975] sd 15:0:0:2: [sdf] Attached SCSI removable disk [110264.697933] sd 15:0:0:3: [sdg] Attached SCSI removable disk [110264.729918] sd 15:0:0:0: [sdd] Attached SCSI removable disk [110264.754189] sde: sde1 [110264.760114] sd 15:0:0:1: [sde] Attached SCSI removable disk [110275.377368] usb 4-1: reset SuperSpeed USB device number 3 using xhci_hcd [110275.398453] usb 4-1: Parent hub missing LPM exit latency info. Power management will be impacted. [110275.436592] xhci_hcd 0000:05:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802e4fb9980 [110275.436600] xhci_hcd 0000:05:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802e4fb99c0 [110277.263444] usb 4-1: USB disconnect, device number 3

  Read the article

• How can I justify software testing to management?

  - by Nate

  I work for a small company (less than 200 employees) whose software group only makes up a small part of our staff (4 employees, occasionally with a few contractors). The four of us have been making strides in transitioning to better practices, and one of the next logical steps is to improve our testing. As anyone who has done any meaningful tests knows, testing takes a lot of time - and at my company, it takes too much time to justify to management, so we generally do what little we do on the sly. I don't think this is serving us well, as we keep coming up against otherwise avoidable problems when we ship under-tested software. I would like to be able to come to management with a justification for hiring a dedicated software test engineer (someone who can both write automated tests and perform manual ones). Are there any good published studies that show the benefits of adding such a position to a small company? Where can I find information about costs associated with the position? I plan on doing a little number crunching on our own history, but having some external sources to point to would help bolster my case.

  Read the article

• Creating a retro-style palette swapping effect in OpenGL

  - by Zack The Human

  I'm working on a Megaman-like game where I need to change the color of certain pixels at runtime. For reference: in Megaman when you change your selected weapon then main character's palette changes to reflect the selected weapon. Not all of the sprite's colors change, only certain ones do. This kind of effect was common and quite easy to do on the NES since the programmer had access to the palette and the logical mapping between pixels and palette indices. On modern hardware, though, this is a bit more challenging because the concept of palettes is not the same. All of my textures are 32-bit and do not use palettes. There are two ways I know of to achieve the effect I want, but I'm curious if there are better ways to achieve this effect easily. The two options I know of are: Use a shader and write some GLSL to perform the "palette swapping" behavior. If shaders are not available (say, because the graphics card doesn't support them) then it is possible to clone the "original" textures and generate different versions with the color changes pre-applied. Ideally I would like to use a shader since it seems straightforward and requires little additional work opposed to the duplicated-texture method. I worry that duplicating textures just to change a color in them is wasting VRAM -- should I not worry about that?

  Read the article

• Syntax logic suggestions

  - by Anna

  This syntax will be used inside HTML attributes. Here are a few examples of what I have so far: <input name="a" conditions="!b, c" /> <input name="b" /> <input name="c" /> This will make input "a" do something if b is not checked and c is checked (b and c are assumed to be checkboxes if they don't have a :value defined) <input name="a" conditions="!b:foo|bar, c:foo" /> <input name="b" /> <input name="c" /> This will make input "a" do something if bdoesn't have foo or bar values, and if c has the foo value. <input name="a" conditions="!b:EMPTY" /> <input name="b" /> Makes input "a" do something if b has a value assigned. So, essentially , acts as logical AND, : as equals (=), ! as NOT, and | as OR. The | (OR) is only needed between values (at least I think so), and AND is not needed between values for obvious reasons :) EMPTY means empty value, like <input value="" /> Do you have any suggestions on improving this syntax, like making it more human friendly? For example I think the "EMPTY" keyword is not really appropriate and should be replaced with a character, but I don't know which one to choose.

  Read the article

• RAM caching causes severe performance drops

  - by B T

  I have read plenty of threads on memory caching and the standard response of "large cache is good, it shouldn't effect performance", "the kernel knows best". I have recently upgraded from 12.04 to 12.10 and changed from VirtualBox to VMware Workstation and the performance differences are severe (I suspect it is because of the latter). When I am running my virtual machine the system load monitor graph shows less than 50% memory usage generally. System load indicator is showing me that the rest of my RAM is used in the cache all the time. Plain and simple this is the comparison: BEFORE Cache was very sparingly used, pretty much none of my memory usage was the cache Swappiness was 0 (caused my memory to be used first, then swap only if needed) Performance was quite good and logical RAM was used fully first, caching was minimal. I could run enough software to utilize my full 4GB of RAM without any performance degradation whatsoever Swap space was then used as needed which was obviously slower (I am on a HDD) but was still usable when the current program was loaded into memory AFTER Cache is used to fill the full 4GB as soon as my virtual machine is run Swappiness is 0 (same behaviour as before but cache uses full memory straight away) Performance is terrible and unusable while running Ubuntu software Basic things like changing windows takes 2 minutes + Changing screens happens frame by frame over sometimes up to 5 minutes Cannot run an IDE and VM like I could with ease before So basically, any suggestions on how to take my performance back to how it was before while keeping my current setup? My suspicion is VMWare is the problem, but how do I see what is tied to the use of the cache? Surely there is a way to control this behaviour in software as polished as VMware? Thanks EDIT: Could also be important to note that the behaviour differs depending on whether VMware is open or closed. If VMware is open, then the ram will lock at like 50% and 50% cache and go into the complete lock up mentioned above. Contrastingly, if VMware is closed (after being open), then the RAM will continue to rise as it needs / cache will stay as the complete remaining memory and there is no noticeable performance degradation.

  Read the article

• Python or Ruby in 2011.

  - by Sleeper Smith

  What I'm really asking is, in the current services and technologies provided, which is a more "useful" language? Which one has more opportunity? Some background info first. I'm a .net C# dev for 5 years. Having done a few projects on Amazon AWS, I'm looking to start a few projects of my own. But Azure's too expensive, and AWS has too much management overhead. My current choice is Google App Engine and Python. Logical enough. But what I want to ask here is this: In Linux world, which is more useful? Recently heard about Heroku for Ruby. How viable is this? Looking at the pricing model indicates that it's more expensive. Which one has more up-to-date and exciting open source projects? For instance Trac is just plain out dated compared to Redmine. One of the big reason pulling me for Ruby is Redmine. Implementations? IronPython/IronRuby/JRuby etc etc. Which one is more standardised and more implementation agnostic? Which one is easier to port between Windows/Linux? Anyway, your input and thoughts are greatly appreciated. thanks.

  Read the article

• Why does 12.04 upgrade abort with out of space error when I have lots of it?

  - by Kristian Thomsen

  When upgrading Ubuntu from 11.10 to 12.04 I discovered an unexpected problem. The upgrade was stopped because there wasn't enough free space for the installation. I managed to free some space and do the upgrade but now a prompt appears after logging in saying I'm out of space. This prompt asks me if I want to examine the problem. The "Disk Usage Analyser" is opened. In the top it says: Total filesystem capacity: 47.0 GB (used: 13.5 GB available: 33.4 GB) Folder -- Usage -- Size / -- 100% -- 12.5 GB usr -- 44.8 % -- 5.6 GB home -- 30.3 % -- 3.8 GB lib -- 13.0 % -- 1.6 GB var -- 9.1 % -- 1.1 GB boot 2.5 % 309.5 GB and a lot of small contributors like: etc, opt, sbin, bin etc. I do not really understand this problem since the analyser in the top says that I have 33.4 GB left in this file system. What can I do to make Ubuntu use the remaining space? Running df -i in the terminal gives: Filesystem Inodes IUsed IFree IUse% Mounted on /dev/sda7 610800 576874 33926 95% / udev 213451 563 212888 1% /dev tmpfs 218524 486 218038 1% /run none 218524 3 218521 1% /run/lock none 218524 7 218517 1% /run/shm /dev/sda8 2264752 16371 2248381 1% /home The output of df -h Filesystem Size Used Avail Use% Mounted on /dev/sda7 9,3G 7,8G 1,1G 88% / udev 993M 4,0K 993M 1% /dev tmpfs 401M 884K 400M 1% /run none 5,0M 0 5,0M 0% /run/lock none 1003M 152K 1002M 1% /run/shm /dev/sda8 35G 4,0G 29G 13% /home /dev/sda2 101G 64G 37G 64% /media/A2C8E28BC8E25CD3 Running sudo fdisk -l gives Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000080 Device Boot Start End Blocks Id System /dev/sda1 63 96389 48163+ de Dell Utility /dev/sda2 * 98304 210434488 105168092+ 7 HPFS/NTFS/exFAT /dev/sda3 210436094 312576704 51070305+ f W95 Ext'd (LBA) /dev/sda5 306279288 312576704 3148708+ dd Unknown /dev/sda6 210436096 214341631 1952768 82 Linux swap / Solaris /dev/sda7 214343680 233873407 9764864 83 Linux /dev/sda8 233875456 306278399 36201472 83 Linux Partition table entries are not in disk order

  Read the article

• Bad DMA/do_IRQ errors on suspend/resume, with occasional freezing

  - by Steve Kroon

  Every time I suspend or resume my laptop (Dell Latitude E6520, bought this year), I get 2 messages of the form displayed on the console just before shutting down/starting up: [ 407.107610] ehci_hcd 0000:00:1d.0: dma_pool_free buffer-128, f6f18000/36f18000 (bad dma) On occasion, I get a message of the form: [ 3753.979066] do_IRQ: 0.177 No irq handler for vector (irq -1) On occasion, my machine freezes with a flashing Caps Lock button when suspending, after which I need to do a hard shutdown. This never happened before the messages started appearing (a while back), and I think it never happens without a do_IRQ message appearing (although I'm not sure about that). [There's nothing in the owner's manual on a flashing Caps Lock button; apparently it may be a kernel panic if the scroll lock also flashes, but the laptop doesn't have a scroll lock light, and there's no message on the console saying kernel panic.] Are these bad DMA/do IRQ messages serious, and what can I do to investigate/troubleshoot them and the freezing? Edit: I've also now received the following error messages a few times: [246943.023908] JBD: I/O error detected when updating journal superblock for sdb1. [246943.023958] Buffer I/O error on device sdb1, logical block 0 [246943.023996] EXT3-fs (sdb1): I/O error while writing superblock Edit: Output of dmesg at http://pastebin.com/ra7MTQEj ; contents of /var/log/kern.log at http://pastebin.com/i6jf0Md9 Edit: the output of some smartctl (-a, -x, --log=error, --log=xerror) instructions is available at http://paste.ubuntu.com/1088488/ . Edit (31/8/2012): Output of dmesg|grep -i ehci available at http://paste.ubuntu.com/1177246/ .

  Read the article

• Dual boot Win 7 Ubuntu - home and boot partitions have no mount point

  - by cwmff

  After installing Ubuntu 12.04.3 on a Windows 7 laptop, running Ubuntu Disk Utility showed the following partition information; /dev/sda1 NTFS, Bootable, Filesystem, Labled: System Reserved, 105MB, Not Mounted /dev/sda2 NTFS, no flag, Filesystem, no label, 84GB, Not Mounted /dev/sda3 Usage: Container for logical partitions. Partition Type: Extended (0x05). no flags. no label. Capacity: 416GB /dev/sda5 Usage: Filesystem. Partition Type: Linux (0x83). no partition label. no flags. Capacity: 999MB. Type: Ext4(ver 1.0). Available: -. Label: -. Mount Point: Not Mounted /dev/sda8 Usage: Filesystem. Partition Type: Linux (0x83). no partition label. no flags. Capacity: 30GB. Type: Ext4(ver 1.0). Available: -. Label: -. Mount Point: Mounted at / /dev/sda6 Usage: Filesystem. Partition Type: Linux (0x83). no partition label. no flags. Capacity: 377GB. Type: Ext4(ver 1.0). Available: -. Label: -. Mount Point: Not Mounted /dev/sda7 Usage: Swap Space. Partition Type: Linux (0x82). no partition label. no flags. Capacity: 8.4GB. sda2 contains Windows 7 but without a mount point sda6 should have been the Home partition and sda5 should have been the Boot partition but the mount points seem to have been lost and now everything but Swap has gone into the root partition sda8 (the Home folder also seems to be within sda8). How do I go about getting sda6 used as the Home partition and sda5 as Boot

  Read the article

• How to use the Raring/Saucy netboot installer to install Precise?

  - by mikepurvis

  We have a Haswell motherboard with onboard ethernet controllers which are not supported in the Precise (3.2) kernel. However, we're using netboot installation, and we'd really like to stick with the LTS version. Once the Precise install is completed, we can install the linux-generic-lts-saucy package, which gets us the ethernet hardware support which is ultimately required. So, our options are: Plug in a USB-Ethernet (or even wifi) dongle, perform the install that way. Modify the Precise installer to somehow include the required driver (a udeb, or some early_command invocation?) Modify the Raring installer (3.8 kernel, which supports the device) to instead install Precise. If it's possible the third option seems like the simplest and most logical to me. Now, we are already using the precise-updates installer (Aug 2013), as opposed to the original April 2012 installer. However, the precise-updates installer still appears to use the 3.2 kernel. I'm already comfortable with preseeding and modifying the netboot initrd. So my question is, can I somehow modify the Raring/Saucy netboot initrd to instead install Precise? Thanks.

  Read the article

• How to "translate" interdependent object states in code?

  - by Earl Grey

  I have the following problem. My UI interace contains several buttons, labels, and other visual information. I am able to describe every possible workflow scenario that should be be allowed on that UI. That means I can describe it like this - when button A is pressed, the following should follow - In the case of that A button, there are three independent factors that influence the possible result when pushing the A button. The state of the session (blank, single, multi, multi special), the actual work that is being done by the system at the moment of pressing the A button (nothing was happening, work was being done, work was paused) and a separate UI element that has two states (on , off)..This gives me a 3 dimensional cube with 24 possible outcomes. I could write code for this using if cycles, switch cycles etc....but the problem is, I have another 7 buttons on that ui, I can enter this UI from different states..some buttons change the state, some change parameters... To sum up, the combinations are mindbogling and I am not able come up with a methodology that scales and is systematically reliable. I am able to describe EVERY workflow with words, I am sure my description is complete and without logical errors. But I am not able to translate that into code. I was trying to draw flowcharts but it soon became visually too complicated due to too many if "emafors". Can you advice how to proceeed?

  Read the article

• arm-none-ebai-gcc does not work from mounted directory

  - by dmytro_lviv

  I want to build project for ARM micro controller. For this purpose in folder with project was placed script, which download toolchain and build him. After run this script toolchain was placed in folder with project. Folder with project placed on another logical disk (which shared between Win and Linux) and this disk is mounting each time when I start develop. (Mount by hand). When I start make, in terminal I receive error: make[3]: arm-none-eabi-gcc: Command not found The output from echo $PATH: /mnt/Smoothie-master/gcc-arm-none-eabi/bin:/usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games The output from whereis arm-none-ebai-gcc: arm-none-ebai-gcc: All binaries files, which are relating to this toolchain are placed in the next directory: /mnt/Smoothie-master/gcc-arm-none-eabi/bin/ and has permissions: "-rwxrwxrwx" Before building this toolchain, I had another similar toolchain (another version of this), but installed through apt-get. And it was removed through apt-get before building new. Where is the problem? Thanks!

  Read the article

• Review: Data Modeling 101

  I just recently read “Data Modeling 101”by Scott W. Ambler where he gave an overview of fundamental data modeling skills. I think this article was excellent for anyone who was just starting to learn or refresh their skills in regards to the modeling of data.  Scott defines data modeling as the act of exploring data oriented structures.  He goes on to explain about how data models are actually used by defining three different types of models. Types of Data Models Conceptual Data Model  Logical Data Model (LDMs) Physical Data Model(PDMs) He further expands on modeling by exploring common data modeling notations because there are no industry standards for the practice of data modeling. Scott then defines how to actually model data by expanding on entities, attributes, identities, and relationships which are the basic building blocks of data models. In addition he discusses the value of normalization for redundancy and demoralization for performance. Finally, he discuss ways in which Developers and DBAs can become better data modelers through the use of practice, and seeking guidance from more experienced data modelers.

  Read the article

• How do I use depth testing and texture transparency together in my 2.5D world?

  - by nbolton

  Note: I've already found an answer (which I will post after this question) - I was just wondering if I was doing it right, or if there is a better way. I'm making a "2.5D" isometric game using OpenGL ES (JOGL). By "2.5D", I mean that the world is 3D, but it is rendered using 2D isometric tiles. The original problem I had to solve was that my textures had to be rendered in order (from back to front), so that the tiles overlapped properly to create the proper effect. After some reading, I quickly realised that this is the "old hat" 2D approach. This became difficult to do efficiently, since the 3D world can be modified by the player (so stuff can appear anywhere in 3D space) - so it seemed logical that I take advantage of the depth buffer. This meant that I didn't have to worry about rendering stuff in the correct order. However, I faced a problem. If you use GL_DEPTH_TEST and GL_BLEND together, it creates an effect where objects are blended with the background before they are "sorted" by z order (meaning that you get a weird kind of overlap where the transparency should be). Here's some pseudo code that should illustrate the problem (incidentally, I'm using libgdx for Android). create() { // ... // some other code here // ... Gdx.gl.glEnable(GL10.GL_DEPTH_TEST); Gdx.gl.glEnable(GL10.GL_BLEND); } render() { Gdx.gl.glClear(GL10.GL_COLOR_BUFFER_BIT | GL10.GL_DEPTH_BUFFER_BIT); Gdx.gl.glBlendFunc(GL10.GL_SRC_ALPHA, GL10.GL_ONE_MINUS_SRC_ALPHA); // ... // bind texture and create vertices // ... } So the question is: How do I solve the transparency overlap problem?

  Read the article

• OVM Server for SPARC Enhancements

  - by Owen Allen

  Oracle VM Servers for SPARC saw a few improvements in Ops Center 12.2. In addition to brownfield support, we've made a number of enhancements to let you add OVM Servers for SPARC to a Server Pool and enable migration of their guests. -When you discover an OVMSS Control Domain and manage it with an Ops Center Agent, its guests are automatically discovered as well. The guest metadata is initially put in the local metadata library in the /guests directory, but you can move it from one library to another to enable migration.-Once you've discovered an OVMSS control domain, you can add it to a server pool, even if it's already configured and running logical domains. Even if live migration between OVMSS systems isn't possible due to CPU incompatibilities, you can still put them in a server pool together and enable guest recovery by configuring the CPU architecture of the guest domain as generic. -You can mark a guest's storage as shared to indicate that it's available to other managed OVM Server systems with the same back-end name. This lets you use storage not fully managed in an Ops Center library as part of guest migration. Put together, these enhancements make it much easier to manage and maintain OVMSS guests.

  Read the article

• cannot mount root filesystem on 10.04

  - by howaryoo

  I tried to apply the recommendation of question: Kernel Panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) After running that command: sudo mount --bind /dev /mnt/dev I get this error message: mount: mount point /mnt/dev does not exist fdisk -l returns /dev/sda1 /dev/sda2 /dev/sda5 do I need to mount sda2 and sda5? Edited after @psusi's comment: /dev/sda1 is the boot file system It seems that I need to mount sda2 or sda5. Here is what I tried: (I tried this on a virtual machine so the sda(s) are now vda(s) ) ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/vda: 19.3 GB, 19327352832 bytes 16 heads, 63 sectors/track, 37449 cylinders Units = cylinders of 1008 * 512 = 516096 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0008eece Device Boot Start End Blocks Id System /dev/vda1 * 3 496 248832 83 Linux Partition 1 does not end on cylinder boundary. /dev/vda2 498 37448 18622465 5 Extended Partition 2 does not end on cylinder boundary. /dev/vda5 498 37448 18622464 8e Linux LVM ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ sudo mount -t ext4 /dev/vda5 /mnt mount: wrong fs type, bad option, bad superblock on /dev/vda5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so ubuntu@ubuntu:~$ sudo mount -t ext2 /dev/vda5 /mnt mount: wrong fs type, bad option, bad superblock on /dev/vda5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so ubuntu@ubuntu:~$ Any info that can help me rescue that server would be greatly appreciated!

  Read the article

• Help finding good players that would display music library as folder structure

  - by cipricus

  I have a big music library. Nothing special here. But I very much dislike the way usually music library is displayed in most recommended players, according to Artist/Album/Year/Genre tags, ignoring my folder structure or making it hardly accessible. The problem is that not all my music is tagged according to genre etc, but all is perfectly ordered by folder structure which takes into account all characteristics handled by tags, as well as many others, which I can change and specify at any time. (I can decide ordering my music by country, inside a sub-category like "baroque music", for example). The advantage of using folder structure in displaying media library is that all the logical structure is displayed, with all sub-categories, which can vary and be changed, visible at the same time. Some Players, like Clementine and Quod Libet, can display folders, but when comes to displaying only the library, they still display it only by tags. I am looking for some plugins to good players that would provide a solution to this, and I am looking for different solutions to this. Therefore I'll display as my own answer some solutions that I have already found and welcome other answers with new and better ways to achieve the same purpose. (Most welcome are of course players that, beside having the capability discussed here, would include other elementary features like playlists in tabs, search, and so forth.)

  Read the article

• Microsoft and innovation: IIF() method

  This Saturday I was watching a couple of eLearning videos from TrainSignal (thanks to the subscription I have with Pluralsight) on Querying Microsoft SQL Server 2012 (exam 70-461). 'Innovation' by Microsoft I kept myself busy learning 'new' things about Microsoft SQL Server 2012 and some best practices. It was incredible 'innovative' to see that there is an additional logic function called IIF() available now: Returns one of two values depending on the value of a logical expression. IIF(lExpression, eExpression1, eExpression2) Ups, my bad... That's actually taken from the syntax page of Visual FoxPro 9.0 SP 2. And tada, at least seven (7+) years later, there's the recent IIF() Transact-SQL version of that function: Returns one of two values, depending on whether the Boolean expression evaluates to true or false in SQL Server 2012. IIF ( boolean_expression, true_value, false_value ) Now, that's what I call innovation! But we all know what happened to Visual FoxPro... It has been reincarnated in form of Visual Studio LightSwitch (and SQL Server). Enough ranting... Happy coding!

  Read the article

• External USB hard-drive changing drive letter

  - by Sydius

  I have a Seagate FreeAgent Go external USB hard drive that was mounted but mysteriously decided to reconnect itself: Sep 30 15:07:06 feinman kernel: [243901.551604] usb 1-1.2: USB disconnect, device number 3 Sep 30 15:07:06 feinman kernel: [243901.553828] sd 6:0:0:0: [sdb] Synchronizing SCSI cache Sep 30 15:07:06 feinman kernel: [243901.553893] sd 6:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK Sep 30 15:07:10 feinman kernel: [243905.336557] usb 1-1.2: new high-speed USB device number 4 using ehci_hcd Sep 30 15:07:10 feinman kernel: [243905.431219] scsi7 : usb-storage 1-1.2:1.0 Sep 30 15:07:11 feinman kernel: [243906.427207] scsi 7:0:0:0: Direct-Access Seagate FreeAgent Go 0148 PQ: 0 ANSI: 4 Sep 30 15:07:11 feinman kernel: [243906.428303] sd 7:0:0:0: Attached scsi generic sg1 type 0 Sep 30 15:07:11 feinman kernel: [243906.430317] sd 7:0:0:0: [sdc] 625142447 512-byte logical blocks: (320 GB/298 GiB) Sep 30 15:07:11 feinman kernel: [243906.430860] sd 7:0:0:0: [sdc] Write Protect is off Sep 30 15:07:11 feinman kernel: [243906.430865] sd 7:0:0:0: [sdc] Mode Sense: 1c 00 00 00 Sep 30 15:07:11 feinman kernel: [243906.431386] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Sep 30 15:07:11 feinman kernel: [243906.493674] sdc: sdc1 Sep 30 15:07:11 feinman kernel: [243906.496109] sd 7:0:0:0: [sdc] Attached SCSI disk It changed from sdb to sdc, causing a number of problems for me. What can I do to further track down the cause? I thought it might be a problem with it sleeping but when I cat /sys/class/scsi_disk/6\:0\:0\:0/allow_restart, I see that it's already 1.

  Read the article

• A fresh install and clean up?

  - by wdypdx22

  I started with Ubuntu around 3 years ago and have been a dedicated user ever since. During that time I tried out lots of apps, themes, etc. And, I've updated every version as it has come along so now I'm running Lucid. Basically, my system has gotten sort of "messy" and I'm planning a vigorous clean up and a fresh install. My /home is on a separate partition from everything else, so I can preserve that. I want to find and remove unused, unneeded apps (which I pretty much understand how to do). Also, I want to get back to the default desktop theme and build back up from there. And other messes surely exist. So, my question is, What is a good, logical plan to clean up and freshly reinstall my system? (One note is that I have found many links in searches on this issue. There are many links on this topic and many are out of date. So, it's gotten rather confusing to say the least.) Thanks.

  Read the article

• Lost files after installing Ubuntu

  - by Joshua Rosato

  I installed Ubuntu on my laptop over windows, I had 2 partitions on one hard disk. It seems like my second partition is gone with all my files. How can I recover the old files? They weren't on the same partition as Windows. I read that the partition has probably just not been mounted so ran sudo fdisk -l to find all the partitions and then ran sudo mount, however I can't tell from the results of sudo mount what is not mounted and I am also unsure how to mount it once I find the unmounted partition. sudo fdisk -l - Results Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0002c6dc Device Boot Start End Blocks Id System /dev/sda1 * 2048 486322175 243160064 83 Linux /dev/sda2 486324222 488396799 1036289 5 Extended /dev/sda5 486324224 488396799 1036288 82 Linux swap / Solaris sudo mount - Results /dev/sda1 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/cgroup type tmpfs (rw) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755) none on /sys/fs/pstore type pstore (rw) systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd) gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=joshy1)

  Read the article

• Dynamic filter expressions in an OpenAccess LINQ query

  We had some support questions recently where our customers had the need to combine multiple smaller predicate expressions with either an OR or an AND  logical operators (these will be the || and && operators if you are using C#). And because the code from the answer that we sent to these customers is very interesting, and can easily be refactorred into something reusable, we decided to write this blog post. The key thing that one must know is that if you want your predicate to be translated by OpenAccess ORM to SQL and executed on the server you must have a LINQ Expression that is not compiled. So, let’s say that you have these smaller predicate expressions: Expression<Func<Customer, bool>> filter1 = c => c.City.StartsWith("S");Expression<Func<Customer, bool>> filter2 = c => c.City.StartsWith("M");Expression<Func<Customer, bool>> filter3 = c => c.ContactTitle == "Owner"; And ...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• In Scrum, should you split up the backlog in a functional backlog and a technical backlog or not?

  - by Patrick

  In our Scrum teams we use a backlog, which mostly contains functional topics, but also sometimes contains technical topics. The advantage of having 1 backlog is that it becomes easy to choose the topics for the next sprint, but I have some questions: First, to me it seems more logical to have a separate technical backlog, where developers themselves can add pure technical items, like: we could improve performance in this method, this class lacks some technical documentation, ... By having one backlog, all developers always have to pass via the product owner to have their topics added to the backlog, which seems additional, unnecessary work for the product owner. Second, if you have a product owner that only focuses on the pure-functional items, the pure-technical items (like missing technical documentation, code that erodes and should be refactored, classes that always give problems during debugging because they don't have a stable foundation and should be refactored, ...) always end up at the end of the list because "they don't serve the customer directly". By having a separate technical backlog, and time reserved in every sprint for these pure technical items, we can improve the applications functionally, but also keep them healthy inside. What is the best approach? One backlog or two?

  Read the article

• dell vostro 1000 broadcom wireless connection

  - by lorrenuy

  I have a problem with the hardware broadcom wifi. I press the hotkey fn+f2 to activate the hardware and this will not work. I'll look at the drivers but it appears to be installed. How can I solve this problem? Ubuntu is all new to me so if possible, give me a clear explanation. Now do I connect the lan cable. I use the Ubuntu 11.10 lawrence@lawrence-Vostro-1000:~$ sudo lshw -class network [sudo] password for lawrence: PCI (sysfs) *-network description: Network controller product: BCM4311 802.11b/g WLAN vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 version: 01 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:18 memory:c0200000-c0203fff *-network description: Ethernet interface product: BCM4401-B0 100Base-TX vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:08:00.0 logical name: eth1 version: 02 serial: 00:1c:23:a2:b9:a9 size: 100Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=b44 driverversion=2.0 duplex=full ip=192.168.1.18 latency=64 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:21 memory:c0300000-c0301fff lawrence@lawrence-Vostro-1000:~$ lawrence@lawrence-Vostro-1000:~$ rfkill list all 0: dell-wifi: Wireless LAN Soft blocked: yes Hard blocked: yes

  Read the article

• New SQLOS features in SQL Server 2012

  - by SQLOS Team

  Here's a quick summary of SQLOS feature enhancements going into SQL Server 2012. Most of these are already in the CTP3 pre-release, except for the Resource Governor enhancements which will be in the release candidate. We've blogged about a couple of these items before. I plan to add detail. Let me know which ones you'd like to see more on: - Memory Manager Redesign: Predictable sizing and governing SQL memory consumption: sp_configure ‘max server memory’ now limits all memory committed by SQL ServerResource Governor governs all SQL memory consumption (other than special cases like buffer pool) Improved scalability of complex queries and operations that make >8K allocations Improved CPU and NUMA locality for memory accesses Single memory manager that handles page allocations of all sizes Consistent Out-of-memory handling & management across different internal components - Optimized Memory Broker for Column Store indexes (Project Apollo) - Resource Governor Support larger scale multi-tenancy by increasing Max. number of resource pools20 -> 64 [for 64-bit] Enable predictable chargeback and isolation by adding a hard cap on CPU usage Enable vertical isolation of machine resources Resource pools can be affinitized to individual or groups of schedulers or to NUMA nodes New DMV for resource pool affinity  - CLR 4 support, adds .NET Framework 4 advantages - sp_server_dianostics Captures diagnostic data and health information about SQL Server to detect potential failures Analyze internal system state Reliable when nothing else is working   - New SQLOS DMVs (in 2008 R2SP1) SQL Server related configuration - New DMVsys.dm_server_services OS related resource configurationNew DMVssys.dm_os_volume_statssys.dm_os_windows_infosys.dm_server_registry XEvents for SQL and OS related Perfmon counters Extend sys.dm_os_sys_info See previous blog posts here and here. - Scale / Mission critical Increased scalability: Support Windows 8 max memory and logical processorsDynamic Memory support in Standard Edition - Hot-Add Memory enabled when virtualized - Various Tier1 Performance Improvements, including reduced instructions for superlatches. Originally posted at http://blogs.msdn.com/b/sqlosteam/

  Read the article

< Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >