Search Results

Search found 2630 results on 106 pages for 'mount'.

Page 44/106 | < Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >

• RAID FS detection at boot time

  - by alex

  An excerpt from dmesg: md: Autodetecting RAID arrays. md: Scanned 2 and added 2 devices. md: autorun ... md: considering sdb1 ... md: adding sdb1 ... md: adding sda1 ... md: created md1 md: bind<sda1> md: bind<sdb1> md: running: <sdb1><sda1> raid1: raid set md1 active with 2 out of 2 mirrors md1: detected capacity change from 0 to 1500299198464 md: ... autorun DONE. md1: unknown partition table EXT3-fs (md1): error: couldn't mount because of unsupported optional features (240) EXT2-fs (md1): error: couldn't mount because of unsupported optional features (240) EXT4-fs (md1): mounted filesystem with ordered data mode Is it OK that kernel tries to mount an ext4 raid as ext3, ext2 first? Is there a way to tell it to skip those two steps? Just in case: /dev/md1 / ext4 noatime 0 1 TIA.

  Read the article

• How could I easily pack a directory to an ext4 loop partition image?

  - by Alvin Wong

  I would like to pack the content of a directory into an ext4 partition image easily, without mounting a loop device. Background: I am building a version of Android which will mount system partitions as a loop device for ARM. Though I can create those partition images by hand using loop devices, it is very troublesome. I want to use an sh script to automatically do the work, and without needing to loop mount the dd-created image and use cp -rp. The best is to directly pack the files into an image file. Question: Is there any simple command-line tools without needing loop mount and root permission that can pack files into an ext4 partition image?

  Read the article

• Trouble with NFS file sharing on Synology 211 NAS and Ubuntu Client

  - by Aglystas

  I'm attempting to set up NFS file sharing and keep getting the error... mount.nfs: access denied by server while mounting 192.168.1.110:/myshared Here is the exact command I'm using to mount sudo mount -o nolock 192.168.1.110:/myshared /home/emiller/MyShared I have set 'Enabled NFS' in DSM and set nfs priviledges in the the Shares section of the control panel. Here is the /etc/exports entry from the NAS. volume1/myshared 192.168.1.*(rw,sync,no_wdelay,no_root_squash,insecure_locks,anonuid=0,anongid=0) I read some things about the hosts.allow and hosts.deny but it seems like if they are empty they aren't used for anything. I can see the share when I run ... showmount -e 192.168.1.110 Any help would be appreciated in this matter.

  Read the article

• Bacula not backing up all the files it should be doing

  - by Nigel Ellis

  I have Bacula (5.2) running on a Fedora 14 system backing up several different computers including Windows 7, Windows 2003 and Windows 2008. When backing up the Windows 2008 server the backup stops after a relatively small amount has been backed up and says the backup was okay. The fileset I am trying to backup should be around 323Gb, but it manages a mere 27Gb before stopping - but not erring. I did try creating a mount on the Fedora computer to the server I am trying to backup, and Bacula managed to copy 58Gb. When I tried to use the mount to copy the files manually I was able to copy them all - there are no problems with permissions etc. on the mount. Please can anyone give a reason why Bacula would just stop? I have heard there is a 260 character limit, but some of the files that should have been copy resolve to a shorter filename than some that have been backed up.

  Read the article

• problem in exporting a partition on a usb stick as nfs volume

  - by Bond

  I have a USB disk which has 2 partitions.I exported one of them (on NFS) and now I am trying to mount it at client machine. Each time it gets error mount -t nfs 192.168.1.19:/media/vol2 /mnt/nfs/ mount.nfs: access denied by server while mounting 192.168.1.19:/media/vol2 Here is the /etc/exports file entry showmount -e on nfs server gives Export list for bond: /media/vol2 */24 On the client machine nfs-client package is installed. What more I need to check? Is it logged some where?

  Read the article

• Mounting Gluster Volumes

  - by Roman Newaza

  I have created Hosted Zone with 2 IP addresses of Gluster Cluster, both IP are returned by dig. After mounting Gluster, I cannot ls mount point as it takes long time. mount shows me it's mounted, but df doesn't. Finally, I have this: ls: cannot access /mnt/storage: Transport endpoint is not connected. But if I mount it with the one of the IP, no problem - volume contents is accessible OS: Ubuntu 11.10 GlusterFS: 3.2.6 Log: http://pastie.org/private/2jgp4h1hnqgzych3djtg I have can telnet storage from client - ports are open.

  Read the article

• dragonflyBSD NFS server and windows 2008 client promission deny

  - by altman

  I have setup a dragonflyBSD NFS server and a windows 2008 NFS client(it's in the linux-KVM). The dragonflyBSD exports file like this: /tank -mapall=root windows-client and i setup my windows 2008 a NFS client all right. There is my win cmd to mount NFS. mount \\dragonfly-server\tank e:\ After finished my configuration. I found the windows client can mount the remote tank partition. And i can create a file or a dir. But when i try to delete the file i just create. It alerts permission deny. You must have the permission.And the same result when i try to write to the text i create in the NFS partition I don't know why i just can create the file through NFS, but can't do any thing else. Is there any body can help?

  Read the article

• Trouble with NFS file sharing on Synology 211 NAS and Ubuntu Client

  - by Aglystas

  I'm attempting to set up NFS file sharing and keep getting the error mount.nfs: access denied by server while mounting 192.168.1.110:/myshared Here is the exact command I'm using to mount: sudo mount -o nolock 192.168.1.110:/myshared /home/emiller/MyShared I have set 'Enabled NFS' in DSM and set NFS priviledges in the the Shares section of the control panel. Here is the /etc/exports entry from the NAS: volume1/myshared 192.168.1.*(rw,sync,no_wdelay,no_root_squash,insecure_locks,anonuid=0,anongid=0) I read some things about the hosts.allow and hosts.deny but it seems like if they are empty they aren't used for anything. I can see the share when I run ... showmount -e 192.168.1.110 Any help would be appreciated in this matter.

  Read the article

• Why isn't this smbmount attempt working?

  - by Max Williams

  I can successfully access one of our local samba shares, which is on a windows pc (called marina) as follows: $ sudo /usr/bin/smbclient \\\\marina\\resource_library <my password> Domain=[MARINA] OS=[Windows 5.1] Server=[Windows 2000 LAN Manager] smb: \> So, that works. I'm now trying to mount the above location (the resource_library folder on marina) to /mnt/resource_library (as a read only folder), but it keeps failing - i've tried a few variations of specifying the location: $ sudo smbmount \\\\marina\\resource_library /mnt/resource_library -o username=max,password=<my password>,r mount error: could not resolve address for marina: No address associated with hostname No ip address specified and hostname not found and $ sudo smbmount //marina/resource_library /mnt/resource_library -o username=max,password=<my password>,r mount error: could not resolve address for marina: No address associated with hostname No ip address specified and hostname not found and both of the above with MARINA instead of marina. It's bound to be some dumb mistake i'm making, can anyone see it? cheers, max

  Read the article

• Mounting LVM2 volume with XFS filesystem

  - by Chris

  Unfortunately I'm not able to access the data on my NAS anymore. I can't figure out why this is the case as I haven't changed anything. So I plugged one of the harddisks in my computer to access the data. What I did: kpartx -a /dev/sdc Now I should be able to access /dev/mapper/vg001-lv001 When trying to mount it I get: sudo mount -t xfs /dev/mapper/vg001-lv001 /home/user/mnt mount: /dev/mapper/vg001-lv001: can't read superblock Now I did a parted -l which gave me Modell: Linux device-mapper (linear) (dm) Festplatte /dev/mapper/vg001-lv001: 498GB Sektorgröße (logisch/physisch): 512B/512B Partitionstabelle: loop Number Begin End Size Filesystem Flags 1 0,00B 498GB 498GB xfs Does anybody have a solution how to recover the data?

  Read the article

• changing filesystem format from jfx to ext4 without losing data

  - by A.Rashad

  I have a fresh Lucid Lynx (Ubuntu 10.04) running on a laptop. where I defined the filesystems as: mount point / on ext4 (46 Gb) mount point /home on jfs (63 GB) swap as 3 Gb I left the machine over night to do some task, without AC power supply. next day in the morning I found it on standby, task completed, but filesystem was not reachable. it gave me I/O error it seems that there is a problem with jfs and standby. anyways, to avoid any hassle, I want to move this mount point from jfs format to ext4. can I do this without losing data and without the need to place the data in a temporary location until transformation is done? sorry to mention that, but I recall back in the windows days, we would change a FAT16 to FAT32 or a FAT32 to NTFS without having to lose the data. I hope this is available on Linux.

  Read the article

• GVFS Locations Not Available In ~/.gvfs

  - by Aaron Copley

  So, I can mount GVFS locations correctly (specifically CIFS) either from the Gnome "Places" menu, or via the command line gvfs-mount, but the filesystem is not mounted in the expected location; ~/.gvfs. In fact, running the mount command does not list any GVFS filesystem at all. This is reproducible for non-root users while the root user behaves as expected. Strace reveals a permissions error for the user mounting the filesystem for the path /home/username/.gvfs. Ownership and permissions are correct and there are no extended attributes for the path as revealed by lsattr. Also, /root/.gvfs and /home/username/.gvfs are on the same filesystem. All packages are current. Any ideas?

  Read the article

• Ubuntu on Oracle VirtualBox: Shared folders

  - by Rosarch

  I looked at this question, but it didn't help. I'm running Windows 7 as a host with Ubuntu 10.10 as a guest with VBox 4.0. I want to have a shared directory between the two. I have installed Guest Additions. I went to the VBox control panel in Windows, added a Shared Folder (sharename Shared_Folder), and chose "Auto Mount". A directory named "sf_Shared_Folder" appeared in /media on Ubuntu, but when I put files in that directory from an OS, I can't see them on the other one. I then tried to create a directory without automounting (sharename collectivefiles), and to run the following command: foo@foo-VirtualBox:~$ sudo mount -t vboxsf collectivefiles FileShare /sbin/mount.vboxsf: mounting failed with the error: No such device What is causing this error? I rebooted both the VM and VBox itself, but I'm still observing this.

  Read the article

• NFS compound failed for server foosrv: error 7 (RPC: Authentication error)

  - by automatthias

  I'm setting up an Ubuntu NFS server with a Solaris 10 client. The basic configuration looks okay to me, and it was also working for some time. I'm getting an "RPC: Authentication error" message on the client. server /etc/exports: /export/opencsw-future 192.168.3.0/24(rw,nohide,insecure,no_subtree_check,async) /export/opencsw-current 192.168.3.0/24(rw,nohide,insecure,no_subtree_check,async) $ ls -ld /export/opencsw-current drwxr-xr-x 7 maciej maciej 4096 2012-02-05 14:55 /export/opencsw-current client $ grep opencsw /etc/vfstab foosrv:/opencsw-current - /export/opencsw-current nfs - yes - $ sudo mount /export/opencsw-current NFS compound failed for server foosrv: error 7 (RPC: Authentication error) (...repeated...) nfs mount: mount: /export/opencsw-current: Permission denied My server host name resolves to both IPv4 and IPv6 addresses.

  Read the article

• Error while mounting home directory on different logical volume

  - by RCola

  I created RAID 5 form 3 hard drives. Formatted as ext4 this raid array. Created VG0 group and lv_home logical volume in LVM. Then I tried to mount default /home directory on lv_home, while trying to mount logical volume lv_home to folder containing user profiles /home, getting error: mount: wrong fs type, bad option, bad superblock on /dev/mapper/VG0-lv_home next is seems to be symbolic link: # file -s /dev/VG0/lv_home /dev/VG0/lv_home: symbolic link to `../mapper/VG0-lv_home' then # file -s /dev/mapper/VG0-lv_home /dev/mapper/VG0-lv_home: data and lvm> pvs PV VG Fmt Attr PSize PFree /dev/md0 VG0 lvm2 a- 2.02g 68.00m lvm> lvdisplay --- Logical volume --- LV Name /dev/VG0/lv_home VG Name VG0 LV UUID WzJus7-2yV8-yhog-Ju1b-TpWH-IIAI-LIutwe LV Write Access read/write LV Status available # open 0 LV Size 1.17 GiB Current LE 300 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 251:0

  Read the article

• Debian doesn't boot after removing secondary hard drive

  - by Daveel

  In the beginning I had Debian 6 running on one hard drive (/dev/sda1). Then I decided to keep all my stuff(pics, videos, etc..) in another slave hard drive (/dev/sdb1). So sda1 has Debian OS sdb1 doesn't contain any OS files I have made it to mount automatically by adding a row in /etc/fstab (UUID and directory to mount to) Time have passed and when I tried to change that secondary hard drive with another hard drive with bigger capacity, for some reason Debian won't boot (just itself sda1) after removing secondary hard drive (sdb1) But if I plug sdb1 back, it boots just fine. I tried to comment line out from /etc/fstab, so it doesn't mount And also did update-grub after umount /dev/sdb1 What's the right way to remove hard drive secondary hard drive?

  Read the article

• how to recover data from my disk - I accidentally copied with dd an iso on it

  - by sijoune

  I wanted to create a bootable usb from an iso image and i accidentally put as the output of the dd, instead of my usb drive, one of my hard disks. The iso was 3,3 GB and my disk is 1TB! And it was almost full. Can i at least restore the data that has not been overwritten? Right now i can't even mount it. I get this error: Error mounting /dev/sdd1 at /media/main/UDF Volume: Command-line `mount -t "udf" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,iocharset=utf8,umask=0077" "/dev/sdd1" "/media/main/UDF Volume"' exited with non-zero exit status 32: mount: wrong fs type, bad option, bad superblock on /dev/sdd1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Also since i know which filesystem my disk used if i reformat it to this filesystem is there any chance i can mount it and retrieve the rest of the files?

  Read the article

• Unity not Working 14.04

  - by Back.Slash

  I am using Ubuntu 14.04 LTS x64. I did a sudo apt-get upgrade yesterday and restarted my PC. Now my taskbar and panel are missing. When I try to restart Unity using unity --replace Then I get error: unity-panel-service stop/waiting compiz (core) - Info: Loading plugin: core compiz (core) - Info: Starting plugin: core unity-panel-service start/running, process 3906 compiz (core) - Info: Loading plugin: ccp compiz (core) - Info: Starting plugin: ccp compizconfig - Info: Backend : gsettings compizconfig - Info: Integration : true compizconfig - Info: Profile : unity compiz (core) - Info: Loading plugin: composite compiz (core) - Info: Starting plugin: composite compiz (core) - Info: Loading plugin: opengl compiz (core) - Info: Unity is fully supported by your hardware. compiz (core) - Info: Unity is fully supported by your hardware. compiz (core) - Info: Starting plugin: opengl libGL error: dlopen /usr/lib/x86_64-linux-gnu/dri/i965_dri.so failed (/usr/lib/x86_64-linux-gnu/dri/i965_dri.so: undefined symbol: _glapi_tls_Dispatch) libGL error: dlopen ${ORIGIN}/dri/i965_dri.so failed (${ORIGIN}/dri/i965_dri.so: cannot open shared object file: No such file or directory) libGL error: dlopen /usr/lib/dri/i965_dri.so failed (/usr/lib/dri/i965_dri.so: cannot open shared object file: No such file or directory) libGL error: unable to load driver: i965_dri.so libGL error: driver pointer missing libGL error: failed to load driver: i965 libGL error: dlopen /usr/lib/x86_64-linux-gnu/dri/swrast_dri.so failed (/usr/lib/x86_64-linux-gnu/dri/swrast_dri.so: undefined symbol: _glapi_tls_Dispatch) libGL error: dlopen ${ORIGIN}/dri/swrast_dri.so failed (${ORIGIN}/dri/swrast_dri.so: cannot open shared object file: No such file or directory) libGL error: dlopen /usr/lib/dri/swrast_dri.so failed (/usr/lib/dri/swrast_dri.so: cannot open shared object file: No such file or directory) libGL error: unable to load driver: swrast_dri.so libGL error: failed to load driver: swrast compiz (core) - Info: Loading plugin: compiztoolbox compiz (core) - Info: Starting plugin: compiztoolbox compiz (core) - Info: Loading plugin: decor compiz (core) - Info: Starting plugin: decor compiz (core) - Info: Loading plugin: vpswitch compiz (core) - Info: Starting plugin: vpswitch compiz (core) - Info: Loading plugin: snap compiz (core) - Info: Starting plugin: snap compiz (core) - Info: Loading plugin: mousepoll compiz (core) - Info: Starting plugin: mousepoll compiz (core) - Info: Loading plugin: resize compiz (core) - Info: Starting plugin: resize compiz (core) - Info: Loading plugin: place compiz (core) - Info: Starting plugin: place compiz (core) - Info: Loading plugin: move compiz (core) - Info: Starting plugin: move compiz (core) - Info: Loading plugin: wall compiz (core) - Info: Starting plugin: wall compiz (core) - Info: Loading plugin: grid compiz (core) - Info: Starting plugin: grid compiz (core) - Info: Loading plugin: regex compiz (core) - Info: Starting plugin: regex compiz (core) - Info: Loading plugin: imgpng compiz (core) - Info: Starting plugin: imgpng compiz (core) - Info: Loading plugin: session compiz (core) - Info: Starting plugin: session I/O warning : failed to load external entity "/home/sumeet/.compiz/session/10de541a813cc1a8fc140170575114755000000020350005" compiz (core) - Info: Loading plugin: gnomecompat compiz (core) - Info: Starting plugin: gnomecompat compiz (core) - Info: Loading plugin: animation compiz (core) - Info: Starting plugin: animation compiz (core) - Info: Loading plugin: fade compiz (core) - Info: Starting plugin: fade compiz (core) - Info: Loading plugin: unitymtgrabhandles compiz (core) - Info: Starting plugin: unitymtgrabhandles compiz (core) - Info: Loading plugin: workarounds compiz (core) - Info: Starting plugin: workarounds compiz (core) - Info: Loading plugin: scale compiz (core) - Info: Starting plugin: scale compiz (core) - Info: Loading plugin: expo compiz (core) - Info: Starting plugin: expo compiz (core) - Info: Loading plugin: ezoom compiz (core) - Info: Starting plugin: ezoom compiz (core) - Info: Loading plugin: unityshell compiz (core) - Info: Starting plugin: unityshell WARN 2014-06-02 18:46:23 unity.glib.dbus.server GLibDBusServer.cpp:579 Can't register object 'org.gnome.Shell' yet as we don't have a connection, waiting for it... ERROR 2014-06-02 18:46:23 unity.debug.interface DebugDBusInterface.cpp:216 Unable to load entry point in libxpathselect: libxpathselect.so.1.4: cannot open shared object file: No such file or directory compiz (unityshell) - Error: GL_ARB_vertex_buffer_object not supported ERROR 2014-06-02 18:46:23 unity.shell.compiz unityshell.cpp:3850 Impossible to delete the unity locked stamp file compiz (core) - Error: Plugin initScreen failed: unityshell compiz (core) - Error: Failed to start plugin: unityshell compiz (core) - Info: Unloading plugin: unityshell X Error of failed request: BadWindow (invalid Window parameter) Major opcode of failed request: 3 (X_GetWindowAttributes) Resource id in failed request: 0x3e000c9 Serial number of failed request: 10115 Current serial number in output stream: 10116 Any help would be highly appreciated. EDIT : My PC configuration description: Portable Computer product: Dell System XPS L502X (System SKUNumber) vendor: Dell Inc. version: 0.1 serial: 1006ZP1 width: 64 bits capabilities: smbios-2.6 dmi-2.6 vsyscall32 configuration: administrator_password=unknown boot=normal chassis=portable family=HuronRiver System frontpanel_password=unknown keyboard_password=unknown power-on_password=unknown sku=System SKUNumber uuid=44454C4C-3000-1030-8036-B1C04F5A5031 *-core description: Motherboard product: 0YR8NN vendor: Dell Inc. physical id: 0 version: A00 serial: .1006ZP1.CN4864314C0560. slot: Part Component *-firmware description: BIOS vendor: Dell Inc. physical id: 0 version: A11 date: 05/29/2012 size: 128KiB capacity: 2496KiB capabilities: pci pnp upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy360 int13floppy1200 int13floppy720 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot smartbattery biosbootspecification netboot *-cpu description: CPU product: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz vendor: Intel Corp. physical id: 19 bus info: cpu@0 version: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz serial: Not Supported by CPU slot: CPU size: 800MHz capacity: 800MHz width: 64 bits clock: 100MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: cores=4 enabledcores=4 threads=8 *-cache:0 description: L1 cache physical id: 1a slot: L1-Cache size: 64KiB capacity: 64KiB capabilities: synchronous internal write-through data *-cache:1 description: L2 cache physical id: 1b slot: L2-Cache size: 256KiB capacity: 256KiB capabilities: synchronous internal write-through data *-cache:2 description: L3 cache physical id: 1c slot: L3-Cache size: 6MiB capacity: 6MiB capabilities: synchronous internal write-back unified *-memory description: System Memory physical id: 1d slot: System board or motherboard size: 6GiB *-bank:0 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: M471B5273DH0-CH9 vendor: Samsung physical id: 0 serial: 450F1160 slot: ChannelA-DIMM0 size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: HMT325S6BFR8C-H9 vendor: Hynix/Hyundai physical id: 1 serial: 0CA0E8E2 slot: ChannelB-DIMM0 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-pci description: Host bridge product: 2nd Generation Core Processor Family DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 09 width: 32 bits clock: 33MHz *-pci:0 description: PCI bridge product: Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port vendor: Intel Corporation physical id: 1 bus info: pci@0000:00:01.0 version: 09 width: 32 bits clock: 33MHz capabilities: pci pm msi pciexpress normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:3000(size=4096) memory:f0000000-f10fffff ioport:c0000000(size=301989888) *-generic UNCLAIMED description: Unassigned class product: Illegal Vendor ID vendor: Illegal Vendor ID physical id: 0 bus info: pci@0000:01:00.0 version: ff width: 32 bits clock: 66MHz capabilities: bus_master vga_palette cap_list configuration: latency=255 maxlatency=255 mingnt=255 resources: memory:f0000000-f0ffffff memory:c0000000-cfffffff memory:d0000000-d1ffffff ioport:3000(size=128) memory:f1000000-f107ffff *-display description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:52 memory:f1400000-f17fffff memory:e0000000-efffffff ioport:4000(size=64) *-communication description: Communication controller product: 6 Series/C200 Series Chipset Family MEI Controller #1 vendor: Intel Corporation physical id: 16 bus info: pci@0000:00:16.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: driver=mei_me latency=0 resources: irq:50 memory:f1c05000-f1c0500f *-usb:0 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 vendor: Intel Corporation physical id: 1a bus info: pci@0000:00:1a.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci-pci latency=0 resources: irq:16 memory:f1c09000-f1c093ff *-multimedia description: Audio device product: 6 Series/C200 Series Chipset Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 05 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:53 memory:f1c00000-f1c03fff *-pci:1 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode cap_list configuration: driver=pcieport resources: irq:16 *-pci:2 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:17 memory:f1b00000-f1bfffff *-network description: Wireless interface product: Centrino Wireless-N 1030 [Rainbow Peak] vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: mon.wlan0 version: 34 serial: bc:77:37:14:47:e5 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list logical wireless ethernet physical configuration: broadcast=yes driver=iwlwifi driverversion=3.13.0-27-generic firmware=18.168.6.1 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:51 memory:f1b00000-f1b01fff *-pci:3 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 4 vendor: Intel Corporation physical id: 1c.3 bus info: pci@0000:00:1c.3 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:19 memory:f1a00000-f1afffff *-usb description: USB controller product: uPD720200 USB 3.0 Host Controller vendor: NEC Corporation physical id: 0 bus info: pci@0000:04:00.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi msix pciexpress xhci bus_master cap_list configuration: driver=xhci_hcd latency=0 resources: irq:19 memory:f1a00000-f1a01fff *-pci:4 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 5 vendor: Intel Corporation physical id: 1c.4 bus info: pci@0000:00:1c.4 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 memory:f1900000-f19fffff *-pci:5 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 6 vendor: Intel Corporation physical id: 1c.5 bus info: pci@0000:00:1c.5 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:17 ioport:2000(size=4096) ioport:f1800000(size=1048576) *-network description: Ethernet interface product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:06:00.0 logical name: eth0 version: 06 serial: 14:fe:b5:a3:ac:40 size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-2.fw ip=172.19.167.151 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s resources: irq:49 ioport:2000(size=256) memory:f1804000-f1804fff memory:f1800000-f1803fff *-usb:1 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci-pci latency=0 resources: irq:23 memory:f1c08000-f1c083ff *-isa description: ISA bridge product: HM67 Express Chipset Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 05 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: driver=lpc_ich latency=0 resources: irq:0 *-ide:0 description: IDE interface product: 6 Series/C200 Series Chipset Family 4 port SATA IDE Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 version: 05 width: 32 bits clock: 66MHz capabilities: ide pm bus_master cap_list configuration: driver=ata_piix latency=0 resources: irq:19 ioport:40b8(size=8) ioport:40cc(size=4) ioport:40b0(size=8) ioport:40c8(size=4) ioport:4090(size=16) ioport:4080(size=16) *-serial UNCLAIMED description: SMBus product: 6 Series/C200 Series Chipset Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 05 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:f1c04000-f1c040ff ioport:efa0(size=32) *-ide:1 description: IDE interface product: 6 Series/C200 Series Chipset Family 2 port SATA IDE Controller vendor: Intel Corporation physical id: 1f.5 bus info: pci@0000:00:1f.5 version: 05 width: 32 bits clock: 66MHz capabilities: ide pm bus_master cap_list configuration: driver=ata_piix latency=0 resources: irq:19 ioport:40a8(size=8) ioport:40c4(size=4) ioport:40a0(size=8) ioport:40c0(size=4) ioport:4070(size=16) ioport:4060(size=16) *-scsi:0 physical id: 1 logical name: scsi0 capabilities: emulated *-disk description: ATA Disk product: SAMSUNG HN-M640M physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 2AR1 serial: S2T3J1KBC00006 size: 596GiB (640GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 sectorsize=512 signature=6b746d91 *-volume:0 description: Windows NTFS volume physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 version: 3.1 serial: 0272-3e7f size: 348MiB capacity: 350MiB capabilities: primary bootable ntfs initialized configuration: clustersize=4096 created=2013-09-18 12:20:45 filesystem=ntfs label=System Reserved modified_by_chkdsk=true mounted_on_nt4=true resize_log_file=true state=dirty upgrade_on_mount=true *-volume:1 description: Extended partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 size: 116GiB capacity: 116GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume:0 description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 6037MiB capabilities: nofs *-logicalvolume:1 description: Linux filesystem partition physical id: 6 logical name: /dev/sda6 logical name: / capacity: 110GiB configuration: mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered state=mounted *-volume:2 description: Windows NTFS volume physical id: 3 bus info: scsi@0:0.0.0,3 logical name: /dev/sda3 logical name: /media/os version: 3.1 serial: 4e7853ec-5555-a74d-82e0-9f49798d3772 size: 156GiB capacity: 156GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2013-09-19 09:19:00 filesystem=ntfs label=OS mount.fstype=fuseblk mount.options=ro,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other,blksize=4096 state=mounted *-volume:3 description: Windows NTFS volume physical id: 4 bus info: scsi@0:0.0.0,4 logical name: /dev/sda4 logical name: /media/data version: 3.1 serial: 7666d55f-e1bf-e645-9791-2a1a31b24b9a size: 322GiB capacity: 322GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2013-09-17 23:27:01 filesystem=ntfs label=Data modified_by_chkdsk=true mount.fstype=fuseblk mount.options=rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other,blksize=4096 mounted_on_nt4=true resize_log_file=true state=mounted upgrade_on_mount=true *-scsi:1 physical id: 2 logical name: scsi1 capabilities: emulated *-cdrom description: DVD-RAM writer product: DVD+-RW GT32N vendor: HL-DT-ST physical id: 0.0.0 bus info: scsi@1:0.0.0 logical name: /dev/cdrom logical name: /dev/sr0 version: A201 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-battery product: DELL vendor: SANYO physical id: 1 version: 2008 serial: 1.0 slot: Rear capacity: 57720mWh configuration: voltage=11.1V `

  Read the article

• ext4 jbd2 journaling active even on empty filesystem

  - by Paul

  I have been having several issues with my ext4 filesystems that seem to be due to jbd2 journaling. I made a related post here and am rephrasing it with the hope that someone may be able to help. For a minimal example, I start with an empty 8gb USB stick and use gparted to create one ext4 partition. The command used by gparted when creating the ext4 file system is: mkfs.ext4 -j -O extent -L DataTraveler8gb /dev/sde1 I check the filesystem with gparted: e2fsck -f -y -v /dev/sde1 and I mount it: sudo mount /dev/sde1 /media/test The disk is empty, but the journaling is very active on this disk (/dev/sde1). The other disks are ext4 SSDs formatted similarly. A snapshot of iotop: % sudo iotop -oPa Total DISK READ: 0.00 B/s | Total DISK WRITE: 2027.21 K/s PID PRIO USER DISK READ DISK WRITE SWAPIN IO COMMAND 262 be/3 root 0.00 B 56.00 K 0.00 % 0.18 % [jbd2/sda1-8] 29069 be/3 root 0.00 B 0.00 B 0.00 % 0.16 % [jbd2/sde1-8] 891 be/3 root 0.00 B 4.00 K 0.00 % 0.03 % [jbd2/sdc1-8] What is jbd2 doing with /dev/sde1? If I follow the same steps with a larger 2Tb disk, iotop indicates this empty disk is constantly being written to by jbd2 at the rate of Mb/s as soon as I mount it. On the other disks, which have the OS and /home, I have tried to find if any files are being modified by processes to cause this behavior but couldn't find any. I also moved many of the disk intensive process to use a tmpfs. And used noatime. I have another non-SSD hard disk on this machine, /dev/sdb, that is also ext4 but was not formatted by gparted (given to me by a coworker). It does not appear in iotop. So I am assuming there an issue with gparted. Any suggestions are appreciated. Also any tips on how to modify existing partitions to fix the issue without having to start from scratch would be great. There are some posts related to jbd2 but they didn't help (eg. here).

  Read the article

• Fix corrupt NTFS partition without Windows

  - by Capt.Nemo

  MY NTFS Partition has gotten corrupt somehow (it's a relic from the days when I had Windows installed). I'm putting the debug output of fdisk and blkid here. At the same time, any OS is unable to mount my root partition, which is located next to my NTFS partition. I'm not sure if this has anything to do with it, though. I get the following error while trying to mount my root partition (sda5) mount: wrong fs type, bad option, bad superblock on /dev/sda5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so ubuntu@ubuntu:~$ dmesg | tail [ 1019.726530] Descriptor sense data with sense descriptors (in hex): [ 1019.726533] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 1019.726551] 1a 3e ed 92 [ 1019.726558] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 1019.726568] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 1a 3e ed 40 00 01 00 00 [ 1019.726584] end_request: I/O error, dev sda, sector 440331666 [ 1019.726602] JBD: Failed to read block at offset 462 [ 1019.726609] ata1: EH complete [ 1019.726612] JBD: recovery failed [ 1019.726617] EXT4-fs (sda5): error loading journal When I open gparted (using live CD), I get an exclamation next to my NTFS drive which states Is there a way to run chkdsk without using windows ? My attempt to run fsck results in the following : ubuntu@ubuntu:~$ sudo fsck /dev/sda fsck from util-linux-ng 2.17.2 e2fsck 1.41.14 (22-Dec-2010) fsck.ext2: Superblock invalid, trying backup blocks... fsck.ext2: Bad magic number in super-block while trying to open /dev/sda The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device> Update : I was able to fix the NTFS partition running chkdsk off HBCD, but it seems that the superblock problem still remains. *Update 2: * Fixed superblock issue using e2fsck -c /dev/sda5

  Read the article

• Red Dot Scope Makes Sighting In Long Lenses a Snap

  - by Jason Fitzpatrick

  If you’ve ever used a high power lens, you know how tricky it can be to sight a distant subject as the field of view through the lens is so tiny. This hack takes care of that problem by using a zero-magnification red dot rifle scope. Chris Malcolm enjoys photographing birds and other wildlife with high power lenses. The problem, when shooting with huge 500mm lens and other high power lenses, is that they’re practically telescopes and acquiring a fast moving target like a bird using a through-the-lens technique is very tricky. Malcolm’s solution hinges on mounting a zero-magnification red dot rifle scope in parallel with the lens. His mock up is a bit unpolished (although we can understand not wanting to run out and buy a brand new black scope just for the experiment) but works great to get him on target. Hit up the link below to read more about his build, how be created the rail mount for the scope, and why he opted to mount it to the barrel of the lens and not the hot shoe mount on the camera. 500mm Reflex Lens with Red Dot Sight [via DIY Photography] Make Your Own Windows 8 Start Button with Zero Memory Usage Reader Request: How To Repair Blurry Photos HTG Explains: What Can You Find in an Email Header?

  Read the article

• A story from SQLvdb and Idera

  - by Peter Larsson

  A year or so back, I struggled with some consistency problems so I figured out I needed a way to "mount" backup files as a virtual database. At the time (SQL Server 2005 and SQL Server 2008) my choice fell on Idera's SQLvdb because it felt easy enough to use. I used it a few times and it worked great. Some time later we upgraded to SQL Server 2008R2 and I didn't use SQLvbd for a long time. Until yesterday... I was upset that suddenly SQLvbd took more than 2 hours to mount the backup file (if it succeeded at all). I uninstalled the application and went for lunch. After lunch, I decided to give SQLvbd another chance so I emailed their tech support and got a response within 30 minutes or so. Now, since I am a SQL Server MVP, they gave me another serial number than my first and I downloaded and installed a newer version. But also this version was really slow. I emailed back to them with the additional information they requested and to my surprise I had got an email this morning when I came back to work, where Idera explained some of the issues (bugs) and asked my to test a newer version. I did, and now a fresh mount of a 100GB database (compressed to 20GB with native compression) located on our SAN takes less than 6 minutes! Thank you. //Peter

  Read the article

• Nexus 7 Possibly Bricked

  - by user214186

  I have a 1st gen Nexus 7 (32GB). I used the steps at https://wiki.ubuntu.com/Nexus7/Installation to successfully install Ubuntu 13.04 desktop onto the tablet. It was working fine and then I decided to upgrade to Ubuntu Touch. I booted the tablet into fast boot mode but the commands 'adb devices' and 'sudo fastboot devices' would not see the device. I am performing these steps from an Ubuntu 12.04 desktop PC. Prior to installing 13.04 the device was seen fine. I made the mistake of performing the 'Device factory reset' step from https://wiki.ubuntu.com/Touch/Install - Step 2. Now when I try to boot the device I get the following: mount: mounting /dev on /root/dev failed: no such file or directory mount: mounting /dev on /root/sys failed: no such file or directory mount: mounting /proc on /root/proc failed: no such file or directory Targe filesystem doesn't have requested /sbin/init. No init found. Try passing init= bootarg. BusyBox v1.20.2 (Ubuntu 1:1.20.0-0ubuntu1) built-in shell (ash) Enter help for a list of built-in commands. (initramfs) I have searched the web but every reference to this problem is from people who still have ADB access to the device so they can recover by flashing the tablet again. I can attach a keyboard to the USB port and access the BusyBox console but I don't know what steps to do to recover from my error. Any suggestions would be helpful. Thanks

  Read the article

• How to restore Windows7 after restore ubuntu bootloader?

  - by Mateusz Rogulski

  At first I will describe my situation in a few points: I have installed Windows7, and then Ubuntu 11.04 on my machine. Then everything works fine and at start of system I have screen from linux where I can choose the system. Then I reinstall Windows7 and install Windows 8 on other partition. Then I can choose between Win7 and win8 when I start system. Then I need my Ubuntu back so I want restore my bootloader from Ubuntu. I boot Ubuntu from USB and in terminal write this commands: sudo fdisk -l Then I get: /dev/sda1 1 13 104391 de Dell Utility /dev/sda2 14 2805 22425601 5 Rozszerzona /dev/sda3 * 2805 41968 314572800 7 HPFS/NTFS /dev/sda4 41968 60802 151282688 7 HPFS/NTFS /dev/sda5 14 2445 19530752 83 Linux /dev/sda6 2445 2805 2893824 82 Linux swap / Solaris Next commands: sudo mount /dev/sda5 /mnt sudo mount --bind /dev /mnt/dev sudo mount --bind /proc /mnt/proc sudo chroot /mnt grub-install /dev/sda I get Installation finished. No error reported.. And when I start my machine I have old Ubuntu start screen to choose system. Ubuntu works well. But There are no Windows 8 option. But my primary problem is when I choose Windows 7 I have: error: no such device ... error: no such disk so I have no idea what can I do. I really need both systems to work. Any help would be appreciated.

  Read the article

• How do I create an encrypted file system inside a file?

  - by darent

  Recently i've found this interesting tutorial: http://flossstuff.wordpress.com/2011/08/07/using-a-file-as-a-storage-device/ It explains how to create an empty file, format it as ext4, and mount it as a device. I'd like to know if it can be created as an encrypted ext4 file system. I've tried using palimpsest (the disk utility found in System menu) to format the already created file system but it doesn't works as it detects the file system being used. If I try to unmount the file system, it won't work neither because it doesn't detect the device (since it's not a real device like a hardrive or a usb drive). So my question is, is there an option to create the file system encrypted from the begining? I've used these commands: Create an empty file 200Mb size: dd if=/dev/zero of=/path/to/file bs=1M count=200 Make it ext4: mkfs -t ext4 file Mount it in a folder inside my home: sudo mount -o loop file /path/to/mount_point Is there any way the mkfs command creates the ext4 encrypted asking for a decryption password? I'm planing to use this as a way to encrypt files inside Dropbox. Thanks for your time.

  Read the article

< Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >