Search Results

Search found 5436 results on 218 pages for 'transfer rate'.

Page 44/218 | < Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >

  • How to prioritize openvpn traffic?

    - by aditsu
    I have an openvpn server, with one network interface. VPN traffic is extremely slow. I tried to do traffic control with this configuration (currently): qdisc del dev eth0 root qdisc add dev eth0 root handle 1: htb default 12 class add dev eth0 parent 1: classid 1:1 htb rate 900mbit #vpn class add dev eth0 parent 1:1 classid 1:10 htb rate 1500kbit ceil 3000kbit prio 1 #local net class add dev eth0 parent 1:1 classid 1:11 htb rate 10mbit ceil 900mbit prio 2 #other class add dev eth0 parent 1:1 classid 1:12 htb rate 500kbit ceil 1000kbit prio 2 filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip sport 1194 0xffff flowid 1:10 filter add dev eth0 protocol ip parent 1:0 prio 2 u32 match ip dst 192.168.10.0/24 flowid 1:11 qdisc add dev eth0 parent 1:10 handle 10: sfq perturb 10 qdisc add dev eth0 parent 1:11 handle 11: sfq perturb 10 qdisc add dev eth0 parent 1:12 handle 12: sfq perturb 10 But it's still extremely slow. I have an imaps connection that keeps transferring data continuously (I successfully limited the rate) but with openvpn I can't seem to get more than about 100kbit/s The internet connection speed is about 3mbit/s (symmetric) What could be the problem? Does the sport filter work for udp?

    Read the article

  • come on!teach u save photos from iphone to computer

    - by goodm
    i am using iphone ,when we have fun,we took a lot of nice pics ,but,that is a question,how to transfer photos from iphone to computer,now ,let me show you,step by step: Step 1: Download Tansee iPhone Transfer Photo free trial version here,and then install it. You also need iTunes above 7.3 installed.or download at: http://www.softseeking.com/prodail.aspx?proid=74 Step 2: Connect iPhone to your computer. Step 3: Launch Tansee iPhone Transfer Photo and all the photos in your iPhone will display automatically, Step 4: Select the photos to be transferred to your computer, the selected file will marked with red border. You can select photos by click on each one, or just drag a rectangle to select a bundle of photos. You can also select all photos by click right button of your mouse or click "File" to choose. Note: you can only select first 6 photos if you haven't purchase. Step 5: Click "Copy" button to select output path and start to transfer photos to your computer: iPhone Camera Photo & Camera Video: Click "Camera Roll", do as steps above can copy your iPhone Camera Photos and iPhone Camera Videos to PC. Options Setting 1.Backup File Format: To select backup photo file format, Tansee iPhone Transfer Photo support BMP and JPG file now. 2.Backup Path: To select directory for storing the backup photos. You can select backup directory for each photo during backup by check "Ask Every Time" or store all files in a specified directory by checking "Save Here" and select the directory in the edit box. 3.Backup Resolution: To select the photo size to be backup.

    Read the article

  • tc rules block traffic from some hosts at network

    - by user139430
    I have a problem I can not solve. The script, which sets the rules for traffic shaping is blocking the traffic from some hosts.If I remove all the rules, then it works. I can not understand why? Here is my script... #!/bin/sh cmdTC=/sbin/tc rateLANDl="60mbit" ceilLANDl="60mbit" rateLANUl="40mbit" ceilLANUl="40mbit" quantLAN="1514" # Nowaday bandwidth limit set to 100mbit. # We devide it with 60mbit download and 40mbit upload bandthes. rateHiDl="30mbit" ceilHiDl="60mbit" rateHiUl="20mbit" ceilHiUl="40mbit" quantHi="1514" rateLoDl="30mbit" ceilLoDl="60mbit" rateLoUl="20mbit" ceilLoUl="40mbit" quantLo="1514" devNIF=eth0 devFIF=ifb0 modprobe ifb ip link set $devFIF up 2>/dev/null #exit 0 ################################################################################################ # Remove discuiplines from network and fake interfaces ################################################################################################ $cmdTC qdisc del dev $devNIF root 2>/dev/null $cmdTC qdisc del dev $devFIF root 2>/dev/null $cmdTC qdisc del dev $devNIF ingress 2>/dev/null if [ "$1" = "down" ]; then exit 0 fi ################################################################################################ # Create discuiplines for network interface ################################################################################################ $cmdTC qdisc add dev $devNIF root handle 1:0 htb default 12 # Create classes for network interface $cmdTC class add dev $devNIF parent 1:0 classid 1:1 htb rate ${rateLANDl} ceil ${ceilLANDl} quantum ${quantLAN} $cmdTC class add dev $devNIF parent 1:1 classid 1:11 htb rate ${rateHiDl} ceil ${ceilHiDl} quantum ${quantHi} $cmdTC class add dev $devNIF parent 1:1 classid 1:12 htb rate ${rateLoDl} ceil ${ceilLoDl} quantum ${quantLo} $cmdTC qdisc add dev $devNIF parent 1:11 handle 111: sfq perturb 10 $cmdTC qdisc add dev $devNIF parent 1:12 handle 112: sfq perturb 10 # Create filters for network interface $cmdTC filter add dev $devNIF protocol all parent 1:0 u32 match ip dst 10.252.2.0/24 flowid 1:11 $cmdTC filter add dev $devNIF protocol all parent 111: handle 111 flow hash keys dst divisor 1024 baseclass 1:11 $cmdTC filter add dev $devNIF protocol all parent 112: handle 112 flow hash keys dst divisor 1024 baseclass 1:12 ################################################################################################ # Create discuiplines for fake interface ################################################################################################ $cmdTC qdisc add dev $devFIF root handle 1:0 htb default 12 # Create classes for network interface $cmdTC class add dev $devFIF parent 1:0 classid 1:1 htb rate ${rateLANUl} ceil ${ceilLANUl} quantum ${quantLAN} $cmdTC class add dev $devFIF parent 1:1 classid 1:11 htb rate ${rateHiUl} ceil ${ceilHiUl} quantum ${quantHi} $cmdTC class add dev $devFIF parent 1:1 classid 1:12 htb rate ${rateLoUl} ceil ${ceilLoUl} quantum ${quantLo} $cmdTC qdisc add dev $devFIF parent 1:11 handle 111: sfq perturb 10 $cmdTC qdisc add dev $devFIF parent 1:12 handle 112: sfq perturb 10 # Create filters for network interface $cmdTC filter add dev $devFIF protocol all parent 1:0 u32 match ip src 10.252.2.0/24 flowid 1:11 $cmdTC filter add dev $devFIF protocol all parent 111: handle 111 flow hash keys src divisor 1024 baseclass 1:11 $cmdTC filter add dev $devFIF protocol all parent 112: handle 112 flow hash keys src divisor 1024 baseclass 1:12 ################################################################################################ # Create redirect discuiplines from network to fake interface ################################################################################################ $cmdTC qdisc add dev $devNIF handle ffff:0 ingress $cmdTC filter add dev $devNIF parent ffff:0 protocol all u32 match u32 0 0 action mirred egress redirect dev $devFIF Here is my /etc/modules: loop ifb ppp_mppe nf_conntrack_pptp nt_conntrack_proto_gre nf_nat_pptp nf_nat_proto_gre The system is Linux wall 2.6.32-5-amd64 #1 SMP Sun Sep 23 10:07:46 UTC 2012 x86_64 GNU/Linux

    Read the article

  • computer plays movie fine but ps3 plays it with no sound?

    - by kacalapy
    i have a movie that plays fine on my computer but when i copy it to an SD card and play it in my PS3 it has no sound. the audio format is mpeg layer-3 bit rate is 128 frame rate is 25frames/ second data rate is 1068 kbps video sample size is 12 bit video compression is DivX i got these stats by right clicking the file and viewing properties. can i open it in some editor and re-save it? what editor? thanks all

    Read the article

  • RAID 6 that can read with least 1000 Mbit/s?

    - by Diblo Dk
    I purchased a Dell PERC 6/i which I expected to be able to read with 1000 Mbps. There is not much to do now, but there are some things I wanted knowledge about for another time. I have configured it with four 2 TByte drives and RAID 6. It have 256 MByt ram and transfer rate of 300 Mbps. The benchmark test showed: Min read rate: 136.3 Mbps Max read rate: 329,6 Mbps Avg read rate: 242,2 Mbps What could I had done to get at least 1000 Mbps? Is it normal for internal and external RAID controllers to have a lower transfer rate eg. 300 Mbps? (I did not noticed at the time that it was not 3 Gbps) How would a RAID 10 had performed compared to RAID 6 or 5? Would it have been better to use software RAID (Linux) with the internal 3 Gbps SATA controller? UPDATE: The drives is SATA III 6 Gbps. http://www.seagate.com/files/staticfiles/docs/pdf/datasheet/disc/desktop-hdd-data-sheet-ds1770-1-1212us.pdf (2TB)

    Read the article

  • Why does HDTune report better performing drives 2 months after installing them?

    - by Rolnik
    OK, so this is really weird. I ran HDTune on a newly set-up home-built computer and got the following readings from my drives in mid-November. SSD 154 MB/s RAID1 87 RAID0 198 (software installs) RAID0 98 Swap drive Today, in January, I run HDTune (same version) and get these results, in MB/s: SSD 186 RAID1 98 RAID0 241 RAID0 98 (Swap drive) Here are more details that HDTune reports on the SSD drive: HD Tune: OCZ-VERTEX Benchmark Blockquote Transfer Rate Minimum : 135.4 MB/sec Transfer Rate Maximum : 219.4 MB/sec Transfer Rate Average : 185.7 MB/sec Access Time : 0.1 ms Burst Rate : 187.3 MB/sec CPU Usage : -1.0% To get to my question: Why are my hard drives improving in performance? Most of my logical drives are in some form of RAID, except for the SSD. Will this performance ever deteriorate? Note, none of my drives are a hybrid drive that uses some form of SSD to enhance the write/reads on actual platters.

    Read the article

  • WD Caviar Green Extremely Slow

    - by Steven
    I am encountering a really weird problem on my WD Caviar Green HDD. Well first of all I have 2 HDDs on my Desktop, one 160GB Seagate holding my Win7 Ultimate x64 and the problematic one, WD 1.5 Caviar Green for storage purpose. My problem is kinda weird, when I transfer files from my Seagate(C:) to my WD (D:) the speed is good (50-60MB/s). Then the problem arises when I transfer too "many" large files, the transfer speed would go straight down to kilobytes/s. Well after I cancelled the transfer and access my D:, even entering a folder requires loading for like 10 seconds. Such problem not only arises when I am transferring files to my D:, it seems like my WD can't handle much activities. For instance, last time I installed my game on D: and I would face much lag after playing for some time. When the same game is installed on C: no problem arises. Does anyone knows what is the problem? P/S: There was one temporary solution that I used to tried. After the "situation" occurs, I tried to access as many folders on D: as I can and let it load, repeating such actions and giving it some time bring the D: back to speedy transfer. However, large transfers would causes the situation to happen again. Does it have something to do with cache whatsoever?

    Read the article

  • Why is piping dd through gzip so much faster than a direct copy?

    - by Foo Bar
    I wanted to backup a path from a computer in my network to another computer in the same network over a 100MBit/s line. For this I did dd if=/local/path of=/remote/path/in/local/network/backup.img which gave me a very low network transfer speed of something about 50 to 100 kB/s, which would have taken forever. So I stopped it and decided to try gzipping it on the fly to make it much smaller so that the amount to transfer is less. So I did dd if=/local/folder | gzip > /remote/path/in/local/network/backup.img.gz But now I get something like 1 MB/s network transfer speed, so a factor of 10 to 20 faster. After noticing this, I tested this on several paths and files and it was always the same. Why does piping dd through gzip also increase the transfer rates by a large factor instead of only reducing the bytelength of the stream by a large factor? I'd expected even a small decrease in transfer rates instead, due to the higher CPU consumption while compressing, but now I get a double plus. Not that I'm not happy, but just wondering. ;)

    Read the article

  • Copied a file with winscp; only winscp can see it

    - by nilbus
    I recently copied a 25.5GB file from another machine using WinSCP. I copied it to C:\beth.tar.gz, and WinSCP can still see the file. However no other app (including Explorer) can see the file. What might cause this, and how can I fix it? The details that might or might not matter WinSCP shows the size of the file (C:\beth.tar.gz) correctly as 27,460,124,080 bytes, which matches the filesize on the remote host Neither explorer, cmd (command line prompt w/ dir C:\), the 7Zip archive program, nor any other File Open dialog can see the beth.tar.gz file under C:\ I have configured Explorer to show hidden files I can move the file to other directories using WinSCP If I try to move the file to Users/, UAC prompts me for administrative rights, which I grant, and I get this error: Could not find this item The item is no longer located in C:\ When I try to transfer the file back to the remote host in a new directory, the transfer starts successfully and transfers data The transfer had about 30 minutes remaining when I left it for the night The morning after the file transfer, I was greeted with a message saying that the connection to the server had been lost. I don't think this is relevant, since I did not tell it to disconnect after the file was done transferring, and it likely disconnected after the file transfer finished. I'm using an old version of WinSCP - v4.1.8 from 2008 I can view the file properties in WinSCP: Type of file: 7zip (.gz) Location: C:\ Attributes: none (Ready-only, Hidden, Archive, or Ready for indexing) Security: SYSTEM, my user, and Administrators group have full permissions - everything other than "special permissions" is checked under Allow for all 3 users/groups (my user, Administrators, SYSTEM) What's going on?!

    Read the article

  • Port-Forwarding in Virtual Box

    - by davidzaz
    I have Virtual Box setup with the following commands: vboxmanage setextradata myVm "VBoxInternal/Devices/pcnet/0/LUN#0/Config/transfer/HostPort" 50000 vboxmanage setextradata myVm `"VBoxInternal/Devices/pcnet/0/LUN#0/Config/transfer/GuestPort" 50000 vboxmanage setextradata myVm "VBoxInternal/Devices/pcnet/0/LUN#0/Config/transfer/Protocol" TCP On the host machine, the following command times out: telnet localhost 50000 What am I doing wrong? The above command does work on the guest machine.

    Read the article

  • Stream computer screen to TV via network instead of a USB wireless link

    - by user24559
    I want to stream my computer screen (not just video or a limited amount of content) to my TV via the network. I know there are wireless devices that use USB to tranfer the screen to the TV. However, these are limited to a short distance. What I want to do is stream the data via the network so I can be anywhere within the network and have the data shown on the tv. I am looking for video and sound to transfer. I want the entire computer screen to transfer just like when you connect the computer to the tv via VGA or HDMI and the sound out using the 3.5mm plug. I have been unable to find a unit that allows for the entire computer screen to transfer via the network. I just find the ability to stream video. I am using Windows 7 Ultimate with a quad processor and 16 GB of memory so I have the power to handle the transfer. My tv is hdtv.

    Read the article

  • Super slow Western Digial External hard drive

    - by shinokada
    I have 2TB of WD external hard drive. I use windows Vista 32x. on DELL laptop Latitude D630 and connect through USB cable. When I transfer from my C drive to external hard drive it transfer only 3KB/sec. It take 30min to transfer 6MB. It is useless at the moment. Can anyone help me how to speed up please. Thanks in advance.

    Read the article

  • Need help in creating test appliaction in Java and passing parameters into a new designed Java API.

    - by Christophe
    Need help, Please!!! By following the protocol, the Request should be built in 5 byte length, including 1 byte for changing Braud rate (Speed), and send request to a RS-232 port. Protocol: --------------- Request for the command processing, with optional extra byte for changing Baud Rate: LGT : length message ( LGT = 5 ) TYPE : 0x06 TO(time out): 0x0000 CMD : (1 byte) 0x02 application update Baud Rate : (1 byte) 0xNN (optional parameter to change baud rate of the Mnt App) where NN can be: 0x00 = No Baud Rate Change (similar to 4-byte command above) 0x09 = Change to 9600 Baud for Application Update speed 0x0A = Change to 19200 Baud for Application Update speed 0x0E = Change to 115200 Baud for Application Update speed All other bytes are not accepted and will result in a status of 0x01. ------------------ I'm trying to test if my code works or not by creating another class (TestApplication.java) and pass the "3 differenr Baut rate" to this CPXAppliaction. the 3 Baud Rate is supposed to input by reading a file.txt. Question: How do you think these code (first half)? please don't warry about the details about the "sending part". I mean, do I need setter/getter for the "speed" parameter pass? I created the demo test class DemoApp.java (input speed by reading a txt file, and pass into CPXAppliaction). how do you think about that code? Many thanks to you guys!! public class CPXApplication extends CPXCommand { private int speed; . public CPXApplication() { speed = 9600; } public CPXApplication(int speedinit) { speed = speedinit; // TODO: where to get the speed? } protected void buildRequest() throws ElitePortException { String trans = ""; // build the full-qualified message following the protocol trans = addToRequest(trans, (char) 0); trans = addToRequest(trans, (char) 5); trans = addToRequest(trans, (char) 6); trans = addToRequest(trans, (char) 0); trans = addToRequest(trans, (char) 0); trans = addToRequest(trans, (char) 2); switch (speed) { case 9600: trans = addToRequest(trans, (char) 0x09); break; case 19200: trans = addToRequest(trans, (char) 0x0A); break; case 115200: trans = addToRequest(trans, (char) 0x0E); break; default: // TODO: unexpected baud rate. throw(); break; } trans = EncryptBinary(trans); trans = "F0." + trans; wrapRequest(trans); } protected String addToRequest(String req, char c) { return req + c; } protected String addToRequest(String req, String s) { return req + s; } protected String addToRequest(String req) { return req; } public void analyzeResponse() { //.............. } } Here is the demo test code: package com.ingenico.testApp; import com.ingenico.EliteFd.; import java.util.Scanner; import java.io.; class Run { public static void run() { CPXAppliactionUpdate input = new CpXApplicationUpdate(); int lineno = 0; try { FileReader fr = new FileReader("baudRateSpeed.txt"); BufferedReader reader = new BufferedReader(fr); String line = reader.readLine(); Scanner scan = null; while (line != null) { scan = new Scanner(line); String speed; speed = scan.next(); if (lineno == 0) { input.speed = speed; lineno++; } else { input = cpxapplicationupdate(speed, input); } line = reader.readLine(); } reader.close(); } catch (FileNotFoundException e) { System.out.println("Could not find the file"); } catch (IOException e) { System.out.println("Had a problem reading from file"); } } public class DemoApp{ public void main(String args[]) { run(); } } }

    Read the article

  • Need help in creating test application in Java and passing parameters into a new designed Java API.

    - by Christophe
    Need help, Please!!! By following the protocol, the Request should be built in 5 byte length, including 1 byte for changing Braud rate (Speed), and send request to a RS-232 port. Protocol: Request for the command processing, with optional extra byte for changing Baud Rate: LGT : length message ( LGT = 5 ) TYPE : 0x06 TO(time out): 0x0000 CMD : (1 byte) 0x02 application update Baud Rate : (1 byte) 0xNN (optional parameter to change baud rate of the Mnt App) where NN can be: 0x00 = No Baud Rate Change (similar to 4-byte command above) 0x09 = Change to 9600 Baud for Application Update speed 0x0A = Change to 19200 Baud for Application Update speed 0x0E = Change to 115200 Baud for Application Update speed All other bytes are not accepted and will result in a status of 0x01. I'm trying to test if my code works or not by creating another class (TestApplication.java) and pass the "3 differenr Baut rate" to this CPXAppliaction. the 3 Baud Rate is supposed to input by reading a file.txt. Question: How do you think these code (first half)? please don't warry about the details about the "sending part". I mean, do I need setter/getter for the "speed" parameter pass? I created the demo test class DemoApp.java (input speed by reading a txt file, and pass into CPXAppliaction). how do you think about that code? Many thanks to you guys!! public class CPXApplication extends CPXCommand { private int speed; . public CPXApplication() { speed = 9600; } public CPXApplication(int speedinit) { speed = speedinit; // TODO: where to get the speed? } protected void buildRequest() throws ElitePortException { String trans = ""; // build the full-qualified message following the protocol trans = addToRequest(trans, (char) 0); trans = addToRequest(trans, (char) 5); trans = addToRequest(trans, (char) 6); trans = addToRequest(trans, (char) 0); trans = addToRequest(trans, (char) 0); trans = addToRequest(trans, (char) 2); switch (speed) { case 9600: trans = addToRequest(trans, (char) 0x09); break; case 19200: trans = addToRequest(trans, (char) 0x0A); break; case 115200: trans = addToRequest(trans, (char) 0x0E); break; default: // TODO: unexpected baud rate. throw(); break; } trans = EncryptBinary(trans); trans = "F0." + trans; wrapRequest(trans); } protected String addToRequest(String req, char c) { return req + c; } protected String addToRequest(String req, String s) { return req + s; } protected String addToRequest(String req) { return req; } public void analyzeResponse() { //.............. } } Here is the demo test code: class Run { public static void run() { CPXAppliaction input = new CpXApplication(); int lineno = 0; try { FileReader fr = new FileReader("baudRateSpeed.txt"); BufferedReader reader = new BufferedReader(fr); String line = reader.readLine(); Scanner scan = null; while (line != null) { scan = new Scanner(line); String speed; speed = scan.next(); if (lineno == 0) { input.speed = speed; lineno++; } else { input = cpxapplication(speed, input); } line = reader.readLine(); } reader.close(); } catch (FileNotFoundException e) { System.out.println("Could not find the file"); } catch (IOException e) { System.out.println("Had a problem reading from file"); } } } public class DemoApp{ public void main(String args[]) { run(); }

    Read the article

  • How can I draw a line with a variable of width?

    - by user1729944
    #include <iostream> #include <cmath> #include "graph1.h" using namespace std; int main() { int diameter = 0; int height = 0; double rate = 0; char repeat = 'y'; int obj_num = 0; displayGraphics(); obj_num = drawRect(0,0,50,400); setColor(obj_num,200,200,200); obj_num = drawRect(0,400,640,79); setColor(obj_num,71,35,35); obj_num = drawLine(50,50,150,50,5); setColor(obj_num,80,80,80); displayBMP("faucet.bmp",150,12); do { do { cout << "Enter the diamater of the cylinder <in inches > 0 but <= 300: "; cin >> diameter; if((diameter<0) || (diameter>300)) { cout << "Incorrect diamater entered; value must be between 1 and 300" << endl; } }while((diameter<0) || (diameter>300)); do { cout << "Enter the height of the cylinder <in inches > 0 but <= 325: "; cin >> height; if((height<0) || (height>325)) { cout << "Incorrect height entered; value must be between 1 and 325" << endl; } }while((height<0) || (height>325)); do { cout << "Enter the facet water's rate: <gallons/minute> "; cin >> rate; if((rate<0) || (rate>100)) { cout << "Incorrect rate entered; value must be between 1 and 100" << endl; } }while((rate<0) || (rate>100)); //I need to draw the lines here. The graphics window has a faucet that is supposed to fill //up a cylinder made out of 3 lines. I don't know how to make the lines vary from the users //input since lines are hard coded with points and all i am receiving is the width for the //bottom line and the height for the left and right lines. cout << "Repeat program? (y/n): "; cin >> repeat; clearGraphics(); }while ( (repeat == 'y') || (repeat == 'Y') ); return 0; } Here is a screenshot for reference:

    Read the article

  • SMART Status Data Interpretation - Disk Utility

    - by Mah
    Last week my external harddisk (Seagate Barracuda 1.5TB in a custom enclosure) showed signs of failure (Disk Utility SMART Pre-failure status - several bad sectors) and I decided to change it. I bought a new HDD (Seagate Barracuda 2TB) and connected it to my Ubuntu box with a SATA to USB cable that could not report SMART status. I copied all the contents of the old HDD to the new HDD (one partition with rsync, the other with parted cp) and then gently replaced the old HDD with the new one inside my aluminum enclosure. For obscure reasons after reconnecting the new HDD through the old enclosure, the Linux box could not detect my partitions. I recovered the partitions with testdisk and restarted the computer. After the restart I checked the SMART status of the new HDD an I get this: Read Error Rate --------------- Normalized 108 Worst 99 Threshold 6 Value 16737944 I got a high value on the Seek Error Rate as well. Wondering why this happens I copied 2 GB directory from one partition to the other and rechecked the SMART status (5 minutes later). This time I got the following: Read Error Rate --------------- Normalized 109 Worst 99 Threshold 6 Value 24792504 As you see there has been an increase in the error rate. I am unable to interpret these numbers. Is my new hard disk already dying? What are the acceptable values in these fields for Seagate hard disks? Then why the assessment is still good? While I could get temperature and airflow temperature data from my old HDD, I can not fetch them for the new one. I noticed that my old hdd had got really hot sometimes. Is it possible that the enclosure is killing the harddisks due to high temperature?... Thanks

    Read the article

  • How can I improve the "smoothness" of a 2D side-scrolling iPhone game?

    - by MrDatabase
    I'm working on a relatively simple 2D side-scrolling iPhone game. The controls are tilt-based. I use OpenGL ES 1.1 for the graphics. The game state is updated at a rate of 30 Hz... And the drawing is updated at a rate of 30 fps (via NSTimer). The smoothness of the drawing is ok... But not quite as smooth as a game like iFighter. What can I do to improve the smoothness of the game? Here are the potential issues I've briefly considered: I'm varying the opacity of up to 15 "small" (20x20 pixels) textures at a time... Apparently varying the opacity in this manner can degrade drawing performance I'm rendering at only 30 fps (via NSTimer)... Perhaps 2D games like iFighter are rendered at a higher frame rate? Perhaps the game state could be updated at a faster rate? Note the acceleration vales are updated at 100 Hz... So I could potentially update part of the game state at 100 hz All of my textures are PNG24... Perhaps PNG8 would help (due to smaller size etc)

    Read the article

  • Trouble with speed and vectors

    - by Eegabooga
    I'm working on adding bullets to my game. Right now I can shoot bullets in the direction that I would like from a ship by getting the ship's angle: int speed = 5; int dx = -(cos(degreesToRadians(ship.angle)) * speed); // rate of change in the x direction int dy = -(sin(degreesToRadians(ship.angle)) * speed); // rate of change in the y direction bulletPosition.addX(dx); // addX(dx) is simply bulletPosition.x += dx bulletPosition.addY(dy); The ship is pretty much the exact same thing, except I use the += operator: int dx += -(cos(degreesToRadians(angle)) * 0.15) int dy += -(sin(degreesToRadians(angle)) * 0.15); shipPosition.addX(dx); shipPosition.addY(dy); I would like to be able to add the ship's velocity to the bullet's velocity, but I'm a little confused as to how should get the speed from the ship's vector. I thought that adding the ship's dx to the bullet's dx like int dx = -(cos(degreesToRadians(ship.angle)) * speed * dx) would work because I'm adding the rate of change of the ship to the rate of change of the bullet, but that doesn't work. So here's the final question: How can I get the speed of my ship and apply it to my bullet's speed? Thanks in advance for all help :)

    Read the article

  • Having trouble returning a value from a method call when sending an array and the program is error out when run in reference to the sort

    - by programmerNOOB
    I am getting the following output when this program is run: Please enter the Social Security Number for taxpayer 0: 111111111 Please enter the gross income for taxpayer 0: 20000 Please enter the Social Security Number for taxpayer 1: 555555555 Please enter the gross income for taxpayer 1: 50000 Please enter the Social Security Number for taxpayer 2: 333333333 Please enter the gross income for taxpayer 2: 5464166 Please enter the Social Security Number for taxpayer 3: 222222222 Please enter the gross income for taxpayer 3: 645641 Please enter the Social Security Number for taxpayer 4: 444444444 Please enter the gross income for taxpayer 4: 29000 Taxpayer # 1 SSN: 111111111, Income is $20,000.00, Tax is $0.00 Taxpayer # 2 SSN: 555555555, Income is $50,000.00, Tax is $0.00 Taxpayer # 3 SSN: 333333333, Income is $5,464,166.00, Tax is $0.00 Taxpayer # 4 SSN: 222222222, Income is $645,641.00, Tax is $0.00 Taxpayer # 5 SSN: 444444444, Income is $29,000.00, Tax is $0.00 Unhandled Exception: System.InvalidOperationException: Failed to compare two elements in the array. --- System.ArgumentException: At least one object must implement IComparable. at System.Collections.Comparer.Compare(Object a, Object b) at System.Collections.Generic.ObjectComparer`1.Compare(T x, T y) at System.Collections.Generic.ArraySortHelper`1.SwapIfGreaterWithItems(T[] keys, IComparer`1 comparer, Int32 a, Int32 b) at System.Collections.Generic.ArraySortHelper`1.QuickSort(T[] keys, Int32 left, Int32 right, IComparer`1 comparer) at System.Collections.Generic.ArraySortHelper`1.Sort(T[] keys, Int32 index, Int32 length, IComparer`1 comparer) --- End of inner exception stack trace --- at System.Collections.Generic.ArraySortHelper`1.Sort(T[] keys, Int32 index, Int32 length, IComparer`1 comparer) at System.Array.Sort[T](T[] array, Int32 index, Int32 length, IComparer`1 comparer) at System.Array.Sort[T](T[] array) at Assignment5.Taxpayer.Main(String[] args) in Program.cs:line 150 Notice the 0s at the end of the line that should be the tax amount??? Here is the code: using System; using System.Collections.Generic; using System.Linq; using System.Text; namespace taxes { class Rates { // Create a class named rates that has the following data members: private int incLimit; private double lowTaxRate; private double highTaxRate; // use read-only accessor public int IncomeLimit { get { return incLimit; } } public double LowTaxRate { get { return lowTaxRate; } } public double HighTaxRate { get { return highTaxRate; } } //A class constructor that assigns default values public Rates() { int limit = 30000; double lowRate = .15; double highRate = .28; incLimit = limit; lowTaxRate = lowRate; highTaxRate = highRate; } //A class constructor that takes three parameters to assign input values for limit, low rate and high rate. public Rates(int limit, double lowRate, double highRate) { } // A CalculateTax method that takes an income parameter and computes the tax as follows: public int CalculateTax(int income) { int limit = 0; double lowRate = 0; double highRate = 0; int taxOwed = 0; // If income is less than the limit then return the tax as income times low rate. if (income < limit) taxOwed = Convert.ToInt32(income * lowRate); // If income is greater than or equal to the limit then return the tax as income times high rate. if (income >= limit) taxOwed = Convert.ToInt32(income * highRate); return taxOwed; } } //end class Rates // Create a class named Taxpayer that has the following data members: public class Taxpayer { //Use get and set accessors. string SSN { get; set; } int grossIncome { get; set; } // Use read-only accessor. public int taxOwed { get { return taxOwed; } } // The Taxpayer class should be set up so that its objects are comparable to each other based on tax owed. class taxpayer : IComparable { public int taxOwed { get; set; } public int income { get; set; } int IComparable.CompareTo(Object o) { int returnVal; taxpayer temp = (taxpayer)o; if (this.taxOwed > temp.taxOwed) returnVal = 1; else if (this.taxOwed < temp.taxOwed) returnVal = -1; else returnVal = 0; return returnVal; } // End IComparable.CompareTo } //end taxpayer IComparable class // **The tax should be calculated whenever the income is set. // The Taxpayer class should have a getRates class method that has the following. public static void GetRates() { // Local method data members for income limit, low rate and high rate. int incLimit = 0; double lowRate; double highRate; string userInput; // Prompt the user to enter a selection for either default settings or user input of settings. Console.Write("Would you like the default values (D) or would you like to enter the values (E)?: "); /* If the user selects default the default values you will instantiate a rates object using the default constructor * and set the Taxpayer class data member for tax equal to the value returned from calling the rates object CalculateTax method.*/ userInput = Convert.ToString(Console.ReadLine()); if (userInput == "D" || userInput == "d") { Rates rates = new Rates(); rates.CalculateTax(incLimit); } // end if /* If the user selects to enter the rates data then prompt the user to enter values for income limit, low rate and high rate, * instantiate a rates object using the three-argument constructor passing those three entries as the constructor arguments and * set the Taxpayer class data member for tax equal to the valuereturned from calling the rates object CalculateTax method. */ if (userInput == "E" || userInput == "e") { Console.Write("Please enter the income limit: "); incLimit = Convert.ToInt32(Console.ReadLine()); Console.Write("Please enter the low rate: "); lowRate = Convert.ToDouble(Console.ReadLine()); Console.Write("Please enter the high rate: "); highRate = Convert.ToDouble(Console.ReadLine()); Rates rates = new Rates(incLimit, lowRate, highRate); rates.CalculateTax(incLimit); } } static void Main(string[] args) { Taxpayer[] taxArray = new Taxpayer[5]; Rates taxRates = new Rates(); // Implement a for-loop that will prompt the user to enter the Social Security Number and gross income. for (int x = 0; x < taxArray.Length; ++x) { taxArray[x] = new Taxpayer(); Console.Write("Please enter the Social Security Number for taxpayer {0}: ", x + 1); taxArray[x].SSN = Console.ReadLine(); Console.Write("Please enter the gross income for taxpayer {0}: ", x + 1); taxArray[x].grossIncome = Convert.ToInt32(Console.ReadLine()); } Taxpayer.GetRates(); // Implement a for-loop that will display each object as formatted taxpayer SSN, income and calculated tax. for (int i = 0; i < taxArray.Length; ++i) { Console.WriteLine("Taxpayer # {0} SSN: {1}, Income is {2:c}, Tax is {3:c}", i + 1, taxArray[i].SSN, taxArray[i].grossIncome, taxRates.CalculateTax(taxArray[i].grossIncome)); } // end for // Implement a for-loop that will sort the five objects in order by the amount of tax owed Array.Sort(taxArray); Console.WriteLine("Sorted by tax owed"); for (int i = 0; i < taxArray.Length; ++i) { Console.WriteLine("Taxpayer # {0} SSN: {1}, Income is {2:c}, Tax is {3:c}", i + 1, taxArray[i].SSN, taxArray[i].grossIncome, taxRates.CalculateTax(taxArray[i].grossIncome)); } } //end main } // end Taxpayer class } //end Any clues as to why the dollar amount is coming up as 0 and why the sort is not working?

    Read the article

  • How TiVo is messing up customer support.

    - by James Fleming
    Ok,  So I've gotten a TiVo and overall, I'm happy, but there have been issues and I suspect I've a defective unit. - Now the nice folks after many service calls were happy to swap it out, and to ensure continuity of service, they sent me a new unit (after a $109 deposit).  That was yesterday. Today, when we go to watch a little TV, and wait for our replacement unit to arrive we find our TiVo service has been suspended. WTF? They have an exchange program, but your unit your waiting to exchange is as dead as a doornail until the replacement arrives. How hard is it to keep the old unit active for an extra week? Here is the exchange w/Tivo below... You are currently number 1 in the queue. We apologize for the delay. We will assign you to an agent as soon as one is available.The average amount of time a customer has to wait is 00:13.  Kaylene (Listening)  Kaylene: Thank you for contacting TiVo! My name is Kaylene. So that I may better assist you, are you an existing customer?  james Fleming: yes I am, but I'm now having second thoughts about being one    Kaylene: Thank you for verifying your information. How may I assist you today James?  james Fleming: I've been having issues w/a tivo box & I'm getting a replacement sent out to me (after paying an additional deposit) and now my current unit is no longer activated  Kaylene: I can help you today!  Kaylene: When we process an exchange we do transfer over the service to the replacement box so it is active and ready to go when you receive it.  james Fleming: which is to say you also make my current box worthless until such time I receive a new box?!?!?  Kaylene: I apologize that your original box was deactivated so we could activate your replacement box.  james Fleming: Why on Earth would I bother to pay in advance for a new box if you were going to kill my existing box.  Kaylene: What features are you needing to use on your current box?  james Fleming: I need to be able to access my netflix subscription (if I'm lucky enough to have it work without rebooting)  Kaylene: Can I have you verify the TiVo Service Number of your TiVo box please?  james Fleming: 7460011906979b4  Kaylene: We have your current box temporary service but not all features are available with temporary service as it is not paid for service.  Kaylene: If you like I can transfer your service back to your current box for now. Then once you receive the new box you will have to call in and have the service transferred back to the new box.  james Fleming: Not paid for? Let's see> one tivo box + 3 year service plan + monthly service + $109 deposit on a second box = what?  Kaylene: Would you like me to transfer your service back to your current box?  james Fleming: Yes - that would be helpful  Kaylene: All you will need to do is contact us again once you receive the new box so we can transfer it back.  Kaylene: I have put your service back on TiVo box 7460011906979b4.  james Fleming: What would also be helpful is your firm informing me to how you'd be cutting service in the interim.  james Fleming: Again - I opted to pay to have a second box delivered BEFORE returning the box I have - thus trying to have a continuity of service..  Kaylene: This is not something we normally do so it is important when you contact us to transfer the service back to the new box when you receive it that you reference this case number: 110622-006089.  Kaylene: I apologize about the inconvenience. You may need  force a few connections for the box to recognize the service again.  james Fleming: If it's not something you normally do than WHY would you have a $109 fee and a term for the service.  james Fleming: I am not mad at you, but your company is not impressing me and I'm blogging about this experience  Kaylene: Again I apologize about the inconvenience but you should be good to go now. Is there anything else I can help you with today?  james Fleming: so I need to go through the re-actviate process or is that somethign you do  Kaylene: When you receive the new TiVo box you need to contact us so we can transfer the service to the new box for you.  james Fleming: sure  Kaylene: Is there anything else I can help you with today James?  james Fleming: Nope - please email this transcript to me  Kaylene: I apologize but we do not have the ability to e-mail you a copy of this transcript. You can view it online at  http://www.tivo.com when you sign into your account or you can copy and paste it now to save it.  Kaylene: Thank you for contacting TiVo today. Your reference number for our conversation is 110622-006089. You can save this for your records, and if necessary, provide this to a later agent to pull up what we discussed. There will be a brief satisfaction survey emailed to you. We would appreciate any feedback on your TiVo Chat Support experience today.  Kaylene: Thank you for using TiVo Chat and have a great day James! Good-bye.  Kaylene has disconnected.

    Read the article

  • Write a program consisting of a main module and three other modules

    - by user106080
    The owner of a super supermarket would like to have a program that computes the monthly gross pay of their employees as well as the employees’s net pay. The input for this program is the employee id number, hourly rate of pay, and number of regular and overtime hours hours worked. Gross pay is the sum of the wages earnes from regular hours; overtime is 1.5 times the regular rate. Net pay is gross pay hours; overtime is paid at 1.5 times the regular rate. Net pay is the gross pay minus deductions. Assume that deduction are taken for tax withholding (50 percent of gross pay) and parking ($10.00 per month) you will need the following variables: EmployeeID (a string) HourRate is (a float) RegHours (a float) ; GrossPay (a float);Tax (afloat) Parking (a float) OverTimeHours (a float) NetPay (a float) GrossPay = Regularhours* HourRate+OverTimeHours*(HourRate*1.5) NetPay= GrossPay – (GrossPay*Tax) – Parking

    Read the article

  • convert video file to .ogg

    - by Levan
    I've been having trouble with this because I'm new to Linux: I would like to convert different video formats to ogv. I found some terminal commands like this: ffmpeg -i input.avi -acodec libvorbis -ac 1 -b 768k output.ogg The problem with these type of commands is that they are intended to change bit rate, fps, or even resolution. I would like to just change the file format without changing anything else about the video. I looked at the man pages for ffmpeg and found some useful info but I don't know how to space command-line options. Are there any easy ways to do this? In addition, is there a command to change the bit rate so that it doesn't go over a certain rate?

    Read the article

  • Legislative Alert - Payroll for North America

    - by Carolyn Cozart
    We have a Legislative Alert for our customers using PeopleSoft Payroll for North America.   The IRS has made some changes to the FUTA reporting for the tax year 2011.  The IRS requires that all employers complete the 940 Schedule A form when completing the Tax Form 940.  On the Schedule A employers must indicate every state in which you were required to pay state unemployment tax during the year (even if that state's credit reduction rate was zero).  For states with a credit reduction rate greater than zero you must enter the FUTA taxable wages paid in that state then multiply it by the credit reduction rate to report the credit reduction amount for that state.  Please go to Document ID 1371681.1 to obtain additional information on this regulation along with Oracle/PeopleSoft position on this new requirement.

    Read the article

  • Mounting ddrescue image after recovery (in over my head)

    - by BorgDomination
    I'm having problems mounting the recovery image. I've tried to mount the image multiple ways. quark@DS9 ~ $ sudo mount -t ext4 /media/jump1/1recover/sdb1.img /mnt mount: wrong fs type, bad option, bad superblock on /dev/loop0, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so quark@DS9 ~ $ sudo mount -r -o loop /media/jump1/1recover/sdb1.img recover mount: you must specify the filesystem type quark@DS9 ~ $ sudo mount /media/jump1/1recover/sdb1.img mnt mount: you must specify the filesystem type It doesn't even give me detailed information on the file I just made, nautilus says it's 160gb. quark@DS9 ~ $ file /media/jump1/1recover/sdb1.img /media/jump1/1recover/sdb1.img: data quark@DS9 ~ $ mmls /media/jump1/1recover/sdb1.img Cannot determine partition type I'm not sure what I'm doing wrong or if I started this process incorrectly from the beginning. I've outlined what I've done so far below. I'm clueless, I'd appreciate if someone had some input for me. What I have done from the beginning My laptop has two hard drives. One has the dual boot Win7 / Linux Mint system files. Secondary one contained my /home folder. The laptop was jarred and the /home disk was broken. I tried a LiveCD recovery, it failed. Wouldn't even load a Live session with the disk installed. So I turned to ddrescue. quark@DS9 ~ $ sudo fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0009fc18 Device Boot Start End Blocks Id System /dev/sda1 * 2048 112642047 56320000 7 HPFS/NTFS/exFAT /dev/sda2 138033152 312580095 87273472 83 Linux /dev/sda3 112644094 138033151 12694529 5 Extended /dev/sda5 112644096 132173823 9764864 83 Linux /dev/sda6 132175872 138033151 2928640 82 Linux swap / Solaris Partition table entries are not in disk order Disk /dev/sdb: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0002a8ea Device Boot Start End Blocks Id System /dev/sdb1 * 63 312576704 156288321 83 Linux Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xed6d054b Device Boot Start End Blocks Id System /dev/sdc1 63 1953520064 976760001 7 HPFS/NTFS/exFAT sda - 160g internal, holds all system files and all computer functions. sdb - 160g internal, BROKEN, contains about 140g of data I'd like to recover. sdc - 1T external, contains recovery image. Only place that has space to do all this. From this site, https://apps.education.ucsb.edu/wiki/Ddrescue I used this script to create an image of the broken hard drive. I changed the destination to the external USB drive. #!/bin/sh prt=sdb1 src=/dev/$prt dst=/media/jump1/1recover/$prt.img log=$dst.log sudo time ddrescue --no-split $src $dst $log sudo time ddrescue --direct --max-retries=3 $src $dst $log sudo time ddrescue --direct --retrim --max-retries=3 $src $dst $log Everything looked like it came off without a hitch: quark@DS9 ~ $ sudo bash recover1 Press Ctrl-C to interrupt Initial status (read from logfile) rescued: 0 B, errsize: 0 B, errors: 0 Current status rescued: 160039 MB, errsize: 4096 B, current rate: 35588 B/s ipos: 3584 B, errors: 1, average rate: 22859 kB/s opos: 3584 B, time from last successful read: 0 s Finished 12.78user 1060.42system 1:56:41elapsed 15%CPU (0avgtext+0avgdata 4944maxresident)k 312580958inputs+0outputs (1major+601minor)pagefaults 0swaps Press Ctrl-C to interrupt Initial status (read from logfile) rescued: 160039 MB, errsize: 4096 B, errors: 1 Current status rescued: 160039 MB, errsize: 1024 B, current rate: 0 B/s ipos: 1536 B, errors: 1, average rate: 13 B/s opos: 1536 B, time from last successful read: 1.3 m Finished 0.00user 0.00system 3:43.95elapsed 0%CPU (0avgtext+0avgdata 4944maxresident)k 238inputs+0outputs (3major+374minor)pagefaults 0swaps Press Ctrl-C to interrupt Initial status (read from logfile) rescued: 160039 MB, errsize: 1024 B, errors: 1 Current status rescued: 160039 MB, errsize: 1024 B, current rate: 0 B/s ipos: 1536 B, errors: 1, average rate: 0 B/s opos: 1536 B, time from last successful read: 3.7 m Finished 0.00user 0.00system 3:43.56elapsed 0%CPU (0avgtext+0avgdata 4944maxresident)k 8inputs+0outputs (0major+376minor)pagefaults 0swaps It looks like, from where I'm standing it worked perfectly. Here's the log: # Rescue Logfile. Created by GNU ddrescue version 1.14 # Command line: ddrescue --direct --retrim --max-retries=3 /dev/sdb1 /media/jump1/1recover/sdb1.img /media/jump1/1recover/sdb1.img.log # current_pos current_status 0x00000600 + # pos size status 0x00000000 0x00000400 + 0x00000400 0x00000400 - 0x00000800 0x254314FC00 + I'm not sure how to proceed. Does this mean all of my data is lost???????? Appreciate ANY input!

    Read the article

  • How do I sync music to my Sony Walkman (Z Series) using Rhythmbox?

    - by Mark Paskal
    I have recently purchased the new Walkman Z from Sony. I can transfer music by mounting it as a drive, but I would prefer to use Rhythmbox to do so. My other Android devices and MP3 players from the past have always just shown up without any tweaking. Using Nautilus to transfer the files is possible but for some reason Nautilus still makes a trash folder on removable drives. Deleting the trash folder anew is really annoying to do every time I delete music from the device. How can I use Rhythmbox to transfer and remove songs instead?

    Read the article

< Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >