Search Results

Search found 5436 results on 218 pages for 'transfer rate'.

Page 47/218 | < Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >

  • Formatting an external HDD stuck at 70%

    - by mahmood
    My external HDD which is a 250GB WD (powered by USB) seems to have problem! Whenever i try to copy some files, it stuck while copying. I decided to format it. So I used windows tool and performed the format (not quickly) however at nearly 70% it stuck. Then I decided to perform a low level format with lowlevel. Again it stuck at 70%. I endup that the HDD has bad sector. So is there any tool that mark the bad sectors and bypass them? It is not very reasonable to through 250GB because of some bad sectors! P.S: I saw a similar topic but there were no conclusion there either. The smart data is Attribute, raw value, value, threshold, status Read Error Rate, 50, 200, 51, OK Spin-Up Time, 3275, 154, 21, OK Start/Stop Count, 2729, 98, 0, OK Reallocated Sectors Count,0, 200, 140, OK Seek Error Rate, 0, 100, 51, OK Power-On Hours (POH), 1057, 99, 0, OK Spin Retry Count, 0, 100, 51, OK Recalibration Retries ,0, 100, 51 , OK Power Cycle Count, 1385, 99, 0, OK Power-off Retract Count, 425, 200, 0, OK Load /Unload Cycle Count,12974, 196, 0, OK Temperature, 43, 43, 0, OK Reallocation Event Count,0, 200, 0, OK Current Pending Sector Count,23,200, 0, Degradation Uncorrectable Sector Count, 0, 100, 0, OK UltraDMA CRC Error Count,6, 200, 0, OK Write Error Rate/Multi-Zone Error Rate,0,100,51, OK It seems that the most important thing is this line Current Pending Sector Count,23,200, 0, Degradation Any idea on that?

    Read the article

  • CPU-adaptive compression

    - by liori
    Hello, Let assume I need to send some data from one computer to another, over a pretty fast network... for example standard 100Mbit connection (~10MB/s). My disk drives are standard HDD, so their speed is somewhere between 30MB/s and 100MB/s. So I guess that compressing the data on the fly could help. But... I don't want to be limited by CPU. If I choose an algorithm that is intensive on CPU, the transfer will actually go slower than without compression. This is difficult with compressors like GZIP and BZIP2 because you usually set the compression strength once for the whole transfer, and my data streams are sometimes easy, sometimes hard to compress--this makes the process suboptimal because sometimes I do not use full CPU, and sometimes the bandwidth is underutilized. Is there a compression program that would adapt to current CPU/bandwidth and hit the sweet spot so that the transfer will be optimal? Ideally for Linux, but I am still curious about all solutions. I'd love to see something compatible with GZIP/BZIP2 decompressors, but this is not necessary. So I'd like to optimize total transfer time, not simply amount of bytes to send. Also I don't need real time decompression... real time compression is enough. The destination host can process the data later in its spare time. I know this doesn't change much (compression is usually much more CPU-intensive than decompression), but if there's a solution that could use this fact, all the better. Each time I am transferring different data, and I really want to make these one-time transfers as quick as possible. So I won't benefit from getting multiple transfers faster due to stronger compression. Thanks,

    Read the article

  • Poor SSL performance with vsftpd

    - by petrus
    I'm trying to tweak vsftpd to achieve maximum performance for my usage: I have only one or two clients that connect to the server. File size is between ~15MB and 1GB. Typical transfer batch represent between 1 and 2GB of data. For testing purposes, I'm using a tmpfs on both sides (thus eliminating any disks bottleneck) with a single 1GB file. When SSL is disabled, performance is good, with a transfer rate at ~120MB/s (reaching the limits of gigabit networking). With SSL enabled only for control traffic (and not data traffic), performance drops at about 112MB/s, which is still within the acceptable limits. However, when SSL is enabled for data flows, the transfer speed drops dramatically: 6.7MB/s using 3DES & SHA (ssl_ciphers=DES-CBC3-SHA in vsftpd.conf) 16MB/s using DES & SHA (ssl_ciphers=DES-CBC-SHA) I didn't tested other ciphers, but from what I can see from the CPU usage during the transfer, it seems that vsftpd is only using a single cpu/core per client. While this can fit for large ftp sites with hundreds of clients, I'd like to avoid this behavior and use more ressources on the server. On a side note, if you have any ideas regarding other openssl ciphers...

    Read the article

  • ffmpeg: converting an avi to a reduced, shareable flv/mp4...

    - by meder
    I recently followed a guide and recompiled my ffmpeg so x264 is enabled. I used some generic settings to convert my 700 MB avi file to a mp4 file, the result was a 407MB mp4 file. The original avi file's settings: Codec: DX50 Resolution: 704x304 Frame rate: 23.976023 Stream 1 Codec: mpga Type: Audio Channels: 2 Sample rate: 48000 Hz Bitrate 179 kb/s Command I used: ffmpeg -i input.avi -acodec libfaac -ab 128k -ac 2 -vcodec libx264 -vpre hq -crf 22 -threads 0 output.mp4 The settings of the output file (output.mp4): Codec: avc1 Resolution: 704x304 Display resolution: 704x304 Frame rate: 11.988011 Stream 1 Codec: mp4a Type: Audio Channels: 2 Sample Rate: 48000 Hz Bits per sample: 16 Bitrate: 1536 kb/s The quality of the output mp4 is pretty nice, it seems as if it's pretty much the same as the original source. However, I'm trying to reduce the filesize and I'm not really sure whether I should go with an flv format or keep it mp4. The advantage the flv would have obviously is that it would be playable with a flash player ( I have come across some swf players which take a flash parameter to play an flv file ).. but maybe I could use the video element, as I'm only going to be displaying this video privately so I don't have to worry about supporting legacy browsers such as IE. Can someone recommend some settings to specify in order for the filesize to be around ~100-150MB or so? I don't mind a reduction in quality, nor do I mind resizing it - I was going to do it initially but I wasn't sure what the guidelines were ( if any ) for dealing with resolution.. since this video's is 704x304 would it still be ok if I forced it into one that isn't perfectly fit for the aspect ratio? I have no clue about that part. I realize that I could have probably specified 28 instead of 22 for the CRF, I'm not sure if I should do that as opposed to maybe specifying smaller resolution, which might make it smaller as well?

    Read the article

  • HOW TO save Contacts from iPhone to Computer?

    - by goodm
    Step 1: Download [b]Tansee iPhone Transfer Contact[/b] free trial version [url="http://softseeking.com/prodail.aspx?proid=47"]here[/url],then install the software (skip if done yet). u can download at:[url="http://www.softseeking.com/prodail.aspx?proid=47"]http://www.softseeking.com/prodail.aspx?proid=47[/url] Step 2: Connect iPhone to your computer. Step 3: Run Tansee iPhone Transfer Contact , your contacts on iPhone memory will display as shown in your iPhone screen automatically as fig 1. Click on single name, all his or her information will display as fig 2 shown. Step 4-a: In fig 1 situation, you can click button "Copy" to copy all contacts from your iPhone to your computer , then select options: 1: Choose File Type: backup to TXT file, ANTC file or CSV file; 2: Choose File Path: You can change the backup path if you do not use default path. 3: Advanced Option: if you choose ANTC format in step 1, you can add a password to protect the file. Note: We do not know the password, so please do remember it. Click OK Button to finish the Copy. See fig 3. Note: You can only copy the first 5 contacts with trail version.[/SIZE] [/SIZE] [size=3][size=3]Step 4-b: In fig 2 situation, click button "Copy Contact From who" to copy contact of a single person, select options: 1: Choose File Type: Backup contacts to TXT file, and CSV file in single contact transfer; 2: Choose File Path: You can change the backup path if you do not use default path; 3: Advanced Option: Disabled in single contact transfer. Click OK Button to finish the Copy. See fig 4. Note: You can only copy the first 5 contacts in trail version.[/size] [/size]

    Read the article

  • avconv gets killed if mkv has subtitles

    - by Lukas Knuth
    What I'm trying to do is to take a movie (in an Matroska container), convert all audio tracks to AC3 and don't touch anything else. I'm using this line: avconv -i infile.mkv -map 0 -vcodec copy -scodec copy -acodec ac3 -ab 256k outfile.mkv This works fine, except when there are subtitles embedded. Then, after some time processing with no progress, avconv just "dies" (output shortened, these seem to be the interesting parts): [matroska,webm @ 0xf867a0] max_analyze_duration reached [matroska,webm @ 0xf867a0] Estimating duration from bitrate, this may be inaccurate ... Incompatible sample format 's16' for codec 'ac3', auto-selecting format 'flt' ... Stream #0.0(eng): Video: H264 / 0x34363248, yuv420p, 1280x536 [PAR 1:1 DAR 160:67], q=2-31, 1k tbn, 1k tbc (default) Stream #0.1(ger): Audio: ac3, 48000 Hz, 5.1, flt, 256 kb/s (default) Stream #0.2(eng): Audio: ac3, 48000 Hz, 5.1, flt, 256 kb/s Stream #0.3(ger): Subtitle: dvdsub (default) (forced) Metadata: title : forced Stream #0.4(ger): Subtitle: dvdsub Metadata: title : complete Stream mapping: Stream #0:0 -> #0:0 (copy) Stream #0:1 -> #0:1 (dca -> ac3) Stream #0:2 -> #0:2 (dca -> ac3) Stream #0:3 -> #0:3 (copy) Stream #0:4 -> #0:4 (copy) Input stream #0:2 frame changed from rate:48000 fmt:s16 ch:6 to rate:48000 fmt:flt ch:6 Input stream #0:1 frame changed from rate:48000 fmt:s16 ch:6 to rate:48000 fmt:flt ch:6 frame= 2606 fps=1303 q=-1.0 size= 3kB time=107.36 bitrate= 0.2kbits/s ... frame=96141 fps=813 q=-1.0 size= 2195806kB time=2807.04 bitrate=6408.2kbits/s frame=96251 fps=810 q=-1.0 size= 2195806kB time=2807.04 bitrate=6408.2kbits/s ... frame=97015 fps=397 q=-1.0 size= 2195806kB time=2807.04 bitrate=6408.2kbits/s Getötet ["Killed", in English] I have no idea why this happens, as there is no error-output. I'd like to just copy the subtitles over, not touch them at all. If that won't work, they can be completely dropped.

    Read the article

  • What does this diagnostic output mean?

    - by ChrisF
    I recently had a fault with my broadband connection. It turned out to be a fault with the ISP's or teleco's equipment. My ISP posted this diagnostic, but while I understand it in general, I'd like to to know more about the details. I'm assuming that ATM means Asynchronous Transfer Mode and PPP means Point to Point Protocol. It was this that my router was indicating as the fault. xDSL Status Test Summary Sync Status: Circuit In Sync General Information NTE Status: NTE Power Status: Unknown Bypass Status: Upstream DSL Link Information Downstream DSL Link Information Loop Loss: 9.0 17.0 SNR Margin: 25 15 Errored Seconds: 0 0 HEC Errors: 0 Cell Count: 0 0 Speed: 448 8128 TAM Status: Successfully executed operation Network Test: Sub-Test Results Layer Name Value Status Modem pass Transmitter Power (Upstream) 12.4 dBm Transmitter Power (Downstream) 8.8 dBm Upstream psd -38 dBm/Hz Downstream psd -51 dBm/Hz DSL pass Equipment Vendor Name TSTC Equipment Vendor Id n/a Equipment Vendor Revision n/a Training Time 8 s Num Syncs 1 Upstream bit rate 448 kbps Downstream bit rate 8128 kbps Upstream maximum bit rate 1108 kbps Downstream maximum bit rate 11744 kbps Upstream Attenuation 3.5 dB Downstream Attenuation 0.0 dB Upstream Noise Margin 20.0 dB Downstream Noise Margin 19.0 dB Local CRC Errors 0 Remote CRC Errors 0 Up Data Path interleaved Down Data Path interleaved Standard Used G_DMT INP INP Upstream Symbols n/a INP Upstream Delay 4 ms INP Upstream Depth 4 INP Downstream Symbols n/a INP Downstream Delay 5 ms INP Downstream Depth 32 ATM Reason: No ATM cells received fail Number of cells transmitted 30 Number of cells received 0 number of Near end HEC errors 0 number of Far end HEC errors n/a PPP Reason: No response from peer fail PAP authentication nottested CHAP authentication nottested (I'm not sure that Super User is the best place to ask this, but two people have suggested I ask it here so here I am).

    Read the article

  • Thecus N5200, disk has dropped out of RAID5

    - by Anders Ekdahl
    We have a Thecus 5200 NAS here at work with five WD Caviar Black 2TB disks in a RADI5 array. Yesterday, disk 4 dropped out of the array, and in the NAS web interface there's a warning about the RAID array being "degraded". When I go into Storage - Disks, disk 1 and 4 has a warning next to them. When I click on the warnings, this information about the disks are displayed: Tray Number 4 Model WD2001FASS-00W2B Power On Hours 2403 Hours Temperature Celsius 34 Reallocated Sector Count 66 Current Pending Sector 1447 Raw Read Error Rate 61 Seek Error Rate 0 Hardware ECC Recovered N/A Tray Number 1 Model WD2001FASS-00W2B Power On Hours 2403 Hours Temperature Celsius 32 Reallocated Sector Count 0 Current Pending Sector 1465 Raw Read Error Rate 0 Seek Error Rate 0 Hardware ECC Recovered N/A I'm not really an expert on either disks or RAID arrays. Does this indicate that the fourth disk is damaged, and needs to be replaced? And what about disk number one? It has a warning, but it's still in the array. Is it safe to add the fourth disk back into the array as a spare? I can't find any way to add it back as a it were before.

    Read the article

  • drop down and post data to data base

    - by DAFFODIL
    This is a form which retrieves data from db and displays them in table. At the beginning of each row there will be a check box. If there are 10 rows fetched, I ii check 5 rows and insert them in to diff db but here when, I click drop down box data is getting in to db automatically,bcoz I use onchange event. Any alternative to prevent this to happen. Data should be inserted only when, I click submit button. Any help will be appreciated <?php $con = mysql_connect("localhost","root",""); if (!$con) { die('Could not connect: ' . mysql_error()); } mysql_select_db("form1", $con); error_reporting(E_ALL ^ E_NOTICE); $nam=$_REQUEST['select1']; $row=mysql_query("select * from inv where name='$nam'"); while($row1=mysql_fetch_array($row)) { $Name=$row1['Name']; $Address =$row1['Address']; $City=$row1['City']; $Pincode=$row1['Pincode']; $No=$row1['No']; $Date=$row1['Date']; $DCNo=$row1['DCNo']; $DcDate=$row1['DcDate']; $YourOrderNo=$row1['YourOrderNo']; $OrderDate=$row1['OrderDate']; $VendorCode=$row1['VendorCode']; $SNo=$row1['SNo']; $descofgoods=$row1['descofgoods']; $Qty=$row1['Qty']; $Rate=$row1['Rate']; $Amount=$row1['Amount']; } ?> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" /> <title>Untitled Document</title> <script type="text/javascript"> function ram(id) { var q=document.getElementById('qty_'+id).value; var r=document.getElementById('rate_'+id).value; document.getElementById('amt_'+id).value=q*r; } </script> </head> <body> <form id="form1" name="form1" method="post" action=""> <table width="1315" border="0"> <script type="text/javascript"> function g() { form1.submit(); } </script> <tr> <th>Name</th> <th align="left"><select name="select1" onchange="g();"> <option value="" selected="selected">select</option> <?php $row=mysql_query("select Name from inv "); while($row1=mysql_fetch_array($row)) { ?> <option value="<?php echo $row1['Name'];?>"><?php echo $row1['Name'];?></option> <?php } ?> </select></th> </tr> <tr> <th>Address</th> <th align="left"><textarea name="Address"><?php echo $Address;?></textarea></th> </tr> <tr> <th>City</th> <th align="left"><input type="text" name="City" value='<?php echo $City;?>' /></th> </tr> <tr> <th>Pincode</th> <th align="left"><input type="text" name="Pincode" value='<?php echo $Pincode;?>'></th> </tr> <tr> <th>No</th> <th align="left"><input type="text" name="No2" value='<?php echo $No;?>' readonly="" /></th> </tr> <tr> <th>Date</th> <th align="left"><input type="text" name="Date" value='<?php echo $Date;?>' /></th> </tr> <tr> <th>DCNo</th> <th align="left"><input type="text" name="DCNo" value='<?php echo $DCNo;?>' readonly="" /></th> </tr> <tr> <th>DcDate:</th> <th align="left"><input type="text" name="DcDate" value='<?php echo $DcDate;?>' /></th> </tr> <tr> <th>YourOrderNo</th> <th align="left"><input type="text" name="YourOrderNo" value='<?php echo $YourOrderNo;?>' readonly="" /></th> </tr> <tr> <th>OrderDate</th> <th align="left"><input type="text" name="OrderDate" value='<?php echo $OrderDate;?>' /></th> </tr> <tr> <th width="80">VendorCode</th> <th width="1225" align="left"><input type="text" name="VendorCode" value='<?php echo $VendorCode;?>' readonly="" /></th> </tr> </table> <table width="1313" border="0"> <tr> <td width="44">&nbsp;</td> <td width="71">SNO</td> <td width="527">DESCRIPTION</td> <td width="214">QUANTITY</td> <td width="214">RATE/UNIT</td> <td width="217">AMOUNT</td> </tr> <?php $i=1; $row=mysql_query("select * from inv where Name='$nam'"); while($row1=mysql_fetch_array($row)) { $SNo=$row1['SNo']; $descofgoods=$row1['descofgoods']; $Qty=$row1['Qty']; $Rate=$row1['Rate']; $Amount=$row1['Amount']; ?> <tr> <td><input type="checkbox" name="checkbox" value="checkbox" checked="checked"/></td> <td><input type="text" name="No[<?php echo $i?>]" value='<?php echo $SNo;?>' readonly=""/></td> <td><input type="text" name="descofgoods[<?php echo $i?>]" value='<?php echo $descofgoods;?>' /></td> <td><input type="text" name="qty[<?php echo $i?>]" maxlength="50000000" id="qty_<?PHP echo($i) ?>"/></td> <td><input type="text" name="Rate[<?php echo $i?>]" value='<?php echo $Rate;?>' id="rate_<?PHP echo($i) ?>" onclick="ram('<?PHP echo($i) ?>')";></td> <td><input type="text" name="Amount[<?php echo $i?>]" id="amt_<?PHP echo($i) ?>"/></td> </tr> <?php $i++;} ?> <tr> <td><input type="submit" value="submit" header("location:values to be brought for print page.php");/></td> </tr> </table> <label></label> </form> </body> </html> <?php /*error_reporting(E_ALL ^ E_NOTICE); $con = mysql_connect("localhost","root",""); if (!$con) { die('Could not connect: ' . mysql_error()); } mysql_select_db("form1", $con); /*if(checked=checkbox) { mysql_query="INSERT INTO invo (Name, Address, City, Pincode, No, Date, DCNo, DcDate, YourOrderNo, OrderDate, VendorCode, SNo, descofgoods, Qty, Rate, Amount) VALUES ('$_POST[Name]','$_POST[Address]','$_POST[City]','$_POST[Pincode]','$_POST[No]','$_POST[Date]','$_POST[DCNo]','$_POST[DcDate]','$_POST[YourOrderNo]','$_POST[OrderDate]','$_POST[VendorCode]','$_POST[SNo]','$_POST[descofgoods]','$_POST[qty]','$_POST[Rate]','$_POST[Amount]')"; } else { header("location:values to be brought for print page.php"); }*/ header("ins.php"); ?>

    Read the article

  • Multiplying values using javascript

    - by DAFFODIL
    i have used js to multiply but only 1st row is getting multiplied other rows are nt getting multiplied. <?php $con = mysql_connect("localhost","root",""); if (!$con) { die('Could not connect: ' . mysql_error()); } mysql_select_db("form1", $con); error_reporting(E_ALL ^ E_NOTICE); $nam=$_REQUEST['select1']; $row=mysql_query("select * from inv where name='$nam'"); while($row1=mysql_fetch_array($row)) { $Name=$row1['Name']; $Address =$row1['Address']; $City=$row1['City']; $Pincode=$row1['Pincode']; $No=$row1['No']; $Date=$row1['Date']; $DCNo=$row1['DCNo']; $DcDate=$row1['DcDate']; $YourOrderNo=$row1['YourOrderNo']; $OrderDate=$row1['OrderDate']; $VendorCode=$row1['VendorCode']; $SNo=$row1['SNo']; $descofgoods=$row1['descofgoods']; $Qty=$row1['Qty']; $Rate=$row1['Rate']; $Amount=$row1['Amount']; } ?> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" /> <title>Untitled Document</title> <script type="text/javascript"> **function ram() { var q=document.getElementById('qty').value; var r=document.getElementById('rate').value; document.getElementById('amt').value=q*r; }** </script> </head> <body> <form id="form1" name="form1" method="post" action=""> <table width="1315" border="0"> <script type="text/javascript"> function g() { form1.submit(); } </script> <tr> <th>Name</th> <th align="left"><select name="select1" onchange="g();"> <option value="" selected="selected">select</option> <?php $row=mysql_query("select Name from inv "); while($row1=mysql_fetch_array($row)) { ?> <option value="<?php echo $row1['Name'];?>"><?php echo $row1['Name'];?></option> <?php } ?> </select></th> </tr> <tr> <th>Address</th> <th align="left"><textarea name="Address"><?php echo $Address;?></textarea></th> </tr> <tr> <th>City</th> <th align="left"><input type="text" name="City" value='<?php echo $City;?>' /></th> </tr> <tr> <th>Pincode</th> <th align="left"><input type="text" name="Pincode" value='<?php echo $Pincode;?>'></th> </tr> <tr> <th>No</th> <th align="left"><input type="text" name="No2" value='<?php echo $No;?>' readonly="" /></th> </tr> <tr> <th>Date</th> <th align="left"><input type="text" name="Date" value='<?php echo $Date;?>' readonly="" /></th> </tr> <tr> <th>DCNo</th> <th align="left"><input type="text" name="DCNo" value='<?php echo $DCNo;?>' readonly="" /></th> </tr> <tr> <th>DcDate:</th> <th align="left"><input type="text" name="DcDate" value='<?php echo $DcDate;?>' /></th> </tr> <tr> <th>YourOrderNo</th> <th align="left"><input type="text" name="YourOrderNo" value='<?php echo $YourOrderNo;?>' readonly="" /></th> </tr> <tr> <th>OrderDate</th> <th align="left"><input type="text" name="OrderDate" value='<?php echo $OrderDate;?>' readonly="" /></th> </tr> <tr> <th width="80">VendorCode</th> <th width="1225" align="left"><input type="text" name="VendorCode" value='<?php echo $VendorCode;?>' readonly="" /></th> </tr> </table> <table width="1313" border="0"> <tr> <td width="44">&nbsp;</td> <td width="71">SNO</td> <td width="527">DESCRIPTION</td> <td width="214">QUANTITY</td> <td width="214">RATE/UNIT</td> <td width="217">AMOUNT</td> </tr> <?php $i=1; $row=mysql_query("select * from inv where Name='$nam'"); while($row1=mysql_fetch_array($row)) { $descofgoods=$row1['descofgoods']; $Qty=$row1['Qty']; $Rate=$row1['Rate']; $Amount=$row1['Amount']; ?> <tr> <td><input type="checkbox" name="checkbox" value="checkbox" /></td> <td><input type="text" name="No" value='<?php echo $No;?>' readonly=""/></td> <td><input type="text" name="descofgoods" value='<?php echo $descofgoods;?>' /></td> <td><input type="text" name="qty" maxlength="50000000" id="qty"/></td> <td><input type="text" name="Rate" value='<?php echo $Rate;?>' id="rate" onclick="ram()";></td> <td><input type="text" name="Amount" id="amt"/></td> </tr> <?php $i++;} ?> <tr> <th colspan="2"><a href="pp.php?msg=<?php echo $nam;?>">Print</a></th> </tr> </table> <label></label> </form> </body> </html>

    Read the article

  • Shrinking TCP Window Size to 0 on Cisco ASA

    - by Brent
    Having an issue with any large file transfer that crosses our Cisco ASA unit come to an eventual pause. Setup Test1: Server A, FileZilla Client <- 1GBPS - Cisco ASA <- 1 GBPS - Server B, FileZilla Server TCP Window size on large transfers will drop to 0 after around 30 seconds of a large file transfer. RDP session then becomes unresponsive for a minute or two and then is sporadic. After a minute or two, the FTP transfer resumes, but at 1-2 MB/s. When the FTP transfer is over, the responsiveness of the RDP session returns to normal. Test2: Server C in same network as Server B, FileZilla Client <- local network - Server B, FileZilla Server File will transfer at 30+ MB/s. Details ASA: 5520 running 8.3(1) with ASDM 6.3(1) Windows: Server 2003 R2 SP2 with latest patches Server: VMs running on HP C3000 blade chasis FileZilla: 3.3.5.1, latest stable build Transfer: 20 GB SQL .BAK file Protocol: Active FTP over tcp/20, tcp/21 Switches: Cisco Small Business 2048 Gigabit running latest 2.0.0.8 VMware: 4.1 HP: Flex-10 3.15, latest version Notes All servers are VMs. Thoughts Pretty sure the ASA is at fault since a transfer between VMs on the same network will not show a shrinking Window size. Our ASA is pretty vanilla. No major changes made to any of the settings. It has a bunch of NAT and ACLs. Wireshark Sample No. Time Source Destination Protocol Info 234905 73.916986 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=131981791 Win=65535 Len=0 234906 73.917220 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234907 73.917224 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234908 73.917231 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=131984551 Win=64155 Len=0 234909 73.917463 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234910 73.917467 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234911 73.917469 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234912 73.917476 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=131988691 Win=60015 Len=0 234913 73.917706 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234914 73.917710 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234915 73.917715 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=131991451 Win=57255 Len=0 234916 73.917949 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234917 73.917953 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234918 73.917958 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=131994211 Win=54495 Len=0 234919 73.918193 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234920 73.918197 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234921 73.918202 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=131996971 Win=51735 Len=0 234922 73.918435 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234923 73.918440 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234924 73.918445 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=131999731 Win=48975 Len=0 234925 73.918679 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234926 73.918684 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234927 73.918689 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132002491 Win=46215 Len=0 234928 73.918922 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234929 73.918927 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234930 73.918932 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132005251 Win=43455 Len=0 234931 73.919165 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234932 73.919169 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234933 73.919174 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132008011 Win=40695 Len=0 234934 73.919408 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234935 73.919413 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234936 73.919418 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132010771 Win=37935 Len=0 234937 73.919652 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234938 73.919656 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234939 73.919661 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132013531 Win=35175 Len=0 234940 73.919895 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234941 73.919899 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234942 73.919904 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132016291 Win=32415 Len=0 234943 73.920138 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234944 73.920142 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234945 73.920147 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132019051 Win=29655 Len=0 234946 73.920381 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234947 73.920386 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234948 73.920391 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132021811 Win=26895 Len=0 234949 73.920625 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234950 73.920629 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234951 73.920632 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234952 73.920638 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132025951 Win=22755 Len=0 234953 73.920868 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234954 73.920871 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234955 73.920876 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132028711 Win=19995 Len=0 234956 73.921111 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234957 73.921115 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234958 73.921120 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132031471 Win=17235 Len=0 234959 73.921356 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234960 73.921362 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234961 73.921370 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132034231 Win=14475 Len=0 234962 73.921598 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234963 73.921606 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234964 73.921613 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132036991 Win=11715 Len=0 234965 73.921841 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234966 73.921848 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234967 73.921855 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132039751 Win=8955 Len=0 234968 73.922085 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234969 73.922092 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234970 73.922099 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132042511 Win=6195 Len=0 234971 73.922328 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234972 73.922335 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234973 73.922342 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132045271 Win=3435 Len=0 234974 73.922571 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234975 73.922579 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234976 73.922586 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132048031 Win=675 Len=0 234981 75.866453 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 675 bytes 234985 76.020168 1.1.1.1 2.2.2.2 TCP [TCP ZeroWindow] ftp-data ivecon-port [ACK] Seq=1 Ack=132048706 Win=0 Len=0 234989 76.771633 2.2.2.2 1.1.1.1 TCP [TCP ZeroWindowProbe] ivecon-port ftp-data [ACK] Seq=132048706 Ack=1 Win=65535 Len=1 234990 76.771648 1.1.1.1 2.2.2.2 TCP [TCP ZeroWindowProbeAck] [TCP ZeroWindow] ftp-data ivecon-port [ACK] Seq=1 Ack=132048706 Win=0 Len=0 234997 78.279701 2.2.2.2 1.1.1.1 TCP [TCP ZeroWindowProbe] ivecon-port ftp-data [ACK] Seq=132048706 Ack=1 Win=65535 Len=1 234998 78.279714 1.1.1.1 2.2.2.2 TCP [TCP ZeroWindowProbeAck] [TCP ZeroWindow] ftp-data ivecon-port [ACK] Seq=1 Ack=132048706 Win=0 Len=0

    Read the article

  • Shrinking Windows Size to 0 on Cisco ASA

    - by Brent
    Having an issue with any large file transfer that crosses our Cisco ASA unit come to an eventual pause. Setup Test1: Server A, FileZilla Client <- 1GBPS - Cisco ASA <- 1 GBPS - Server B, FileZilla Server TCP Window size on large transfers will drop to 0 after around 30 seconds of a large file transfer. RDP session then becomes unresponsive for a minute or two and then is sporadic. After a minute or two, the FTP transfer resumes, but at 1-2 MB/s. When the FTP transfer is over, the responsiveness of the RDP session returns to normal. Test2: Server C in same network as Server B, FileZilla Client <- local network - Server B, FileZilla Server File will transfer at 30+ MB/s. Details ASA: 5520 running 8.3(1) with ASDM 6.3(1) Windows: Server 2003 R2 SP2 with latest patches Server: VMs running on HP C3000 blade chasis FileZilla: 3.3.5.1, latest stable build Transfer: 20 GB SQL .BAK file Protocol: Active FTP over tcp/20, tcp/21 Switches: Cisco Small Business 2048 Gigabit running latest 2.0.0.8 VMware: 4.1 HP: Flex-10 3.15, latest version Notes All servers are VMs. Thoughts Pretty sure the ASA is at fault since a transfer between VMs on the same network will not show a shrinking Window size. Our ASA is pretty vanilla. No major changes made to any of the settings. It has a bunch of NAT and ACLs. Wireshark Sample No. Time Source Destination Protocol Info 234905 73.916986 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=131981791 Win=65535 Len=0 234906 73.917220 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234907 73.917224 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234908 73.917231 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=131984551 Win=64155 Len=0 234909 73.917463 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234910 73.917467 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234911 73.917469 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234912 73.917476 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=131988691 Win=60015 Len=0 234913 73.917706 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234914 73.917710 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234915 73.917715 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=131991451 Win=57255 Len=0 234916 73.917949 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234917 73.917953 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234918 73.917958 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=131994211 Win=54495 Len=0 234919 73.918193 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234920 73.918197 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234921 73.918202 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=131996971 Win=51735 Len=0 234922 73.918435 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234923 73.918440 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234924 73.918445 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=131999731 Win=48975 Len=0 234925 73.918679 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234926 73.918684 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234927 73.918689 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132002491 Win=46215 Len=0 234928 73.918922 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234929 73.918927 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234930 73.918932 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132005251 Win=43455 Len=0 234931 73.919165 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234932 73.919169 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234933 73.919174 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132008011 Win=40695 Len=0 234934 73.919408 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234935 73.919413 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234936 73.919418 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132010771 Win=37935 Len=0 234937 73.919652 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234938 73.919656 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234939 73.919661 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132013531 Win=35175 Len=0 234940 73.919895 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234941 73.919899 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234942 73.919904 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132016291 Win=32415 Len=0 234943 73.920138 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234944 73.920142 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234945 73.920147 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132019051 Win=29655 Len=0 234946 73.920381 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234947 73.920386 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234948 73.920391 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132021811 Win=26895 Len=0 234949 73.920625 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234950 73.920629 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234951 73.920632 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234952 73.920638 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132025951 Win=22755 Len=0 234953 73.920868 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234954 73.920871 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234955 73.920876 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132028711 Win=19995 Len=0 234956 73.921111 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234957 73.921115 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234958 73.921120 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132031471 Win=17235 Len=0 234959 73.921356 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234960 73.921362 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234961 73.921370 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132034231 Win=14475 Len=0 234962 73.921598 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234963 73.921606 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234964 73.921613 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132036991 Win=11715 Len=0 234965 73.921841 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234966 73.921848 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234967 73.921855 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132039751 Win=8955 Len=0 234968 73.922085 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234969 73.922092 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234970 73.922099 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132042511 Win=6195 Len=0 234971 73.922328 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234972 73.922335 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234973 73.922342 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132045271 Win=3435 Len=0 234974 73.922571 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234975 73.922579 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234976 73.922586 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132048031 Win=675 Len=0 234981 75.866453 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 675 bytes 234985 76.020168 1.1.1.1 2.2.2.2 TCP [TCP ZeroWindow] ftp-data ivecon-port [ACK] Seq=1 Ack=132048706 Win=0 Len=0 234989 76.771633 2.2.2.2 1.1.1.1 TCP [TCP ZeroWindowProbe] ivecon-port ftp-data [ACK] Seq=132048706 Ack=1 Win=65535 Len=1 234990 76.771648 1.1.1.1 2.2.2.2 TCP [TCP ZeroWindowProbeAck] [TCP ZeroWindow] ftp-data ivecon-port [ACK] Seq=1 Ack=132048706 Win=0 Len=0 234997 78.279701 2.2.2.2 1.1.1.1 TCP [TCP ZeroWindowProbe] ivecon-port ftp-data [ACK] Seq=132048706 Ack=1 Win=65535 Len=1 234998 78.279714 1.1.1.1 2.2.2.2 TCP [TCP ZeroWindowProbeAck] [TCP ZeroWindow] ftp-data ivecon-port [ACK] Seq=1 Ack=132048706 Win=0 Len=0

    Read the article

  • PERL XPath Parser Help

    - by cognvision
    I want to pull in data using a XML::XPath parser from a XML DB file from the Worldbank site. The problem is that I'm not seeing any results in the output. I must be missing something in the code. Ideally, I would like to extract just the death rate statistics from each country XML DB (year and value). I'm using this as part of my input: http://data.worldbank.org/sites/default/files/countries/en/afghanistan_en.xml use strict; use LWP 5.64; use HTML::ContentExtractor; use XML::XPath; my $agent1 = LWP::UserAgent->new; my $extractor = HTML::ContentExtractor->new(); #Retrieve main Worldbank country site my $mainlink = "http://data.worldbank.org/country/"; my $page = $agent1->get("$mainlink"); my $fulltext = $page->decoded_content(); #Match to just all available countries in Worldbank my $country = ""; my @countryList; if (@countryList = $fulltext =~ m/(http:\/\/data\.worldbank\.org\/country\/.*?")/gi){ foreach $country(@countryList){ #Remove " at the end of link $country=~s/\"//gi; print "\n" . $country; #Retrieve each country profile's XML DB file my $page = $agent1->get("$country"); my $fulltext = $page->decoded_content(); my $XML_DB = ""; my @countryXMLDBList; if (@countryXMLDBList = $fulltext =~ m/(http:\/\/data\.worldbank\.org\/sites\/default\/files\/countries\/en\/.*?\.xml)/gi){ foreach $XML_DB(@countryXMLDBList){ my $page = $agent1->get("$XML_DB"); my $fulltext = $page->decoded_content(); #print $fulltext; #Use XML XPath parser to find elements related to death rate my $xp = XML::XPath->new($fulltext); #my $xp = XML::XPath->new("afghanistan_en.xml"); my $nodeSet = $xp->find("//*"); if (!$nodeSet->isa('XML::XPath::NodeSet') || $nodeSet->size() == 0) { #No match found print "\nMatch not found!"; exit; } else { foreach my $node ($nodeSet->get_nodelist){ print "\n" . $node->find('country')->string_value; print "\n" . $node->find('indicator')->string_value; print "\n" . $node->find('year')->string_value; print "\n" . $node->find('value')->string_value; exit; } } } #Build line graph based on death rate statistics and output some image file format } } } I am also looking into using the xpath expression "following-sibling", but not sure how to use it correctly. For example, I have the following set of XML data where I am only interested in pulling siblings directly after the indicator for just death rate data. <data> <country id="AFG">Afghanistan</country> <indicator id="SP.DYN.CDRT.IN">Death rate, crude (per 1,000 people)</indicator> <year>2006</year> <value>20.3410000</value> </data> - <data> <country id="AFG">Afghanistan</country> <indicator id="SP.DYN.CDRT.IN">Death rate, crude (per 1,000 people)</indicator> <year>2007</year> <value>19.9480000</value> </data> - <data> <country id="AFG">Afghanistan</country> <indicator id="SP.DYN.CDRT.IN">Death rate, crude (per 1,000 people)</indicator> <year>2008</year> <value>19.5720000</value> </data> - <data> <country id="AFG">Afghanistan</country> <indicator id="IC.EXP.DOCS">Documents to export (number)</indicator> <year>2005</year> <value>7.0000000</value> </data> - <data> <country id="AFG">Afghanistan</country> <indicator id="IC.EXP.DOCS">Documents to export (number)</indicator> <year>2006</year> <value>12.0000000</value> </data> - <data> <country id="AFG">Afghanistan</country> <indicator id="IC.EXP.DOCS">Documents to export (number)</indicator> <year>2007</year> <value>12.0000000</value> </data> Any help would be much appreciated!!!

    Read the article

  • MS Windows Server 2008R2 slow file copy, slow network connection

    - by MattrixHax
    i just setup a windows 2008R2 standard server, with the only installed app being Hyper-V, and only 1 windows XP VM is running. Whenever i try to copy a file from my windows 7 laptop over to the 2008R2 server machine's admin shares ( \\servername\c$ ) the files start transferring around 60mb/s and then drop to around 5mb/s. My windows 7 machine and the server 2008 machine are both in WORKGROUP (no domain here). when i try the same transfer to our server 2003 box the transfer speeds are fine. tried disabling autotuning (netsh interface tcp set global autotuninglevel=disabled) as well as turning off the checksum offload to the adapter (tx and rx) - i still see strange packet errors (bad header checksum) using wireshark and just cannot seem to track down what the issue is - over 1 hour to transfer 4gb of files from 1 server to another that are on the same GB switch is just crazy.... any ideas would be greatly appreciated!

    Read the article

  • afp/smb transfers caps at 2 megabytes/sec, wireless N

    - by CQM
    I wanted to transfer files between two mac computers. The network is wireless-N and both computers have wireless-N modules in them. The problem is that when I transfer files between them, via file sharing (afp) the network speed caps at 2 megabytes/sec. Just downloading files from the internet I can get faster speeds, so this isn't a constriction of my wifi bandwidth, it appears to be a constriction of the protocol being used. My wifi-n is set to 130mbits, so I should see real world transfer speeds around 12-16 megabytes/sec I did this command on both computers sudo sysctl -w net.inet.tcp.delayed_ack=0 which is supposed to lower tcp overhead, but this did not affect it. How can I get the speed I am expecting?

    Read the article

  • How could I represent 1.625 by 0 or a 1 (binary digit)?

    - by pepito
    This is an excerpt from wikipedia about 'full rate' speech coding standard. Full Rate or FR or GSM-FR or GSM 06.10 was the first digital speech coding standard used in the GSM digital mobile phone system. The bit rate of the codec is 13 kbit/s, or 1.625 bits/audio sample. And this one is an excerpt from wikipedia about bit. In computing parlance, bit is the abbreviation for a single binary digit, represented by a 0 or a 1. How could I represent 1.625 by 0 or a 1? Actually, that's my lecturer's question that I could not answer. Some links to papers are more than welcome. Thanks in advance.

    Read the article

  • Does using a single cable to connect two switches create a bottleneck?

    - by Nick
    I realise this may be a stupid question for some, but it's something I've always wondered about. Let's say we have two gigabit switches and all of the devices on the network are also gigabit. If 10 computers connected to switch A need to transfer large amounts of data to a server on Switch B (at the same time), is the maximum transfer speed of each connection limited by the bandwidth of the connection between the two switches? In other words, would each computer only be able to transfer at a speed of one gigabit divided by the 10 machines trying to use the "bridge" between switches? If so, are there any workarounds so that every device can use it's maximum speed from point to point?

    Read the article

  • Cloning hard drive -- data, operating system settings, everything

    - by Salman A
    I am using Windows XP. My hard drive (Seagate 160gig Barracuda) is about to fail. Its already developed bad sectors and it seems to get worse everyday. Data transfer mode is down to PIO mode 2, chkdsk runs every now and then, registry and important windows files get corrupted and I spend 30-60 minutes running chkdsk /f /r from the recovery console. I've got a replacement (Seagate 5000gig Barracuda) and now i want to transfer each and every thing on to the new drive. I don't want to go through windows and software installation, I spent ages getting all those software installed and configured on that hard drive. Need advice: whats the best way to transfer everything onto the new drive so that it behaves just like the old one. And are there any "gotchas".

    Read the article

  • Is there an apache module to slow down site scans?

    - by florin
    I am administering a few web servers. Each night, random hosts from the Internet are probing them for various vulnerabilities in php, phpadmin, horde, mysqladmin, etc. Is there a way (apache plugin?) to slow down the rate of attack? For SSH, I have a rate limiting rule on the firewall, which does not allow more than three connections per minute. But I don't want to rate limit all HTTP access, only the access that returns 404s. Is there such an apache module?

    Read the article

  • Transferring domains when registered owner's email address is incorrect

    - by www.jacob-
    Years ago I registered some domains using a now expired university email address. The other contact details for the registered owner (postal address and phone number) are still correct. In order to change/update the email address, the registrar wants to charge £20 a domain. I would like to transfer the domains away from the current registrar. I can unlock the domains and generate an auth code. However, I cannot authorise the transfer by email as any emails sent to the registered owner's address will bounce. This seems to rule out most registrars I have tried. Are there any ways to transfer these domains without paying the £20 fee to update the registered owner's details?

    Read the article

  • Using pscp and getting permission denied

    - by Espen
    I'm using pscp to transfer files to a virtual ubuntu server using this command: pscp test.php user@server:/var/www/test.php and I get the error permission denied. If I try to transfer to the folder /home/user/ I have no problems. I guess this has to do with that the user I'm using doesn't have access to the folder /var/www/. When I use SSH I have to use sudo to get access to the /var/www/ path - and I do. Is it possible to specify that pscp should "sudo" transfers to the server so I can get access to the /var/www/ path and actually be able to transfer files to this folder?

    Read the article

  • media is write protected when using diskshadow.exe, start-bitstransfer powershell cmdlet

    - by Aaron - Solution Evangelist
    i am trying to use the powershell start-bitstransfer cmdlets to transfer a file i have exposed using a vss snapshot (via diskshadow), but unfortunately i am receiving the following error: Start-BitsTransfer : The media is write protected. At line:1 char:49 + Import-CSV c:\hda1\bits.txt | start-bitstransfer <<<< -transfertype upload -Authentication "Basic" -Credential $cred + CategoryInfo : InvalidOperation: (:) [Start-BitsTransfer], Exception + FullyQualifiedErrorId : StartBitsTransferCOMException,Microsoft.BackgroundIntelligentTransfer.Management.NewBits TransferCommand we really want to utilize the bits endpoint we are attempting to transfer the files to. is there any other way we can go about this (aside from copying the files elsewhere first, unless we can copy one slice at a time and transfer that)?

    Read the article

  • Calculating IOPS for a single HDD - what am I doing wrong?

    - by red888
    So I know there is no standardized way of calculating IOPS for a HDD, but from everything I have read it appears one of the most accurate formulas is the following: IOP/ms = + {rotational latency} + ({block size} / {data transfer rate}) Which is IOs per millisecond or what the book I've been reading calls "Disk Service Time". Also rotational latency is calculated as half of one rotation in milliseconds. This was taken from the EMC book "Information Storage and Management" -arguably a pretty reliable source right\wrong? Putting this formula into practice consider this Seagate data sheet. I am going to calculate IOPS for the ST3000DM001 model for a block size of 4kb: Seek Average (Write) = 9.5 -I'll measuring IOPS for writes Spindle speed = 7200rpm Average Data Rate = 156MB/s So my variables are: Seek Time = 9.5ms Rotational latency = (.5 / (7200rpm / 60)) = 0.004s = 4ms Data Rate = 156MB/s = (0.156MB/ms / 0.004MB) = 39 9.5ms + 4ms + 39 = IO/ms 52.5 1 / (52.5 * 0.001) = 19 IOPS 19 IOPS for this drive clearly is not right so what am I doing wrong?

    Read the article

  • Apple file sharing: bind to a specific interface

    - by Cesar
    My customer have an office small office with just a wifi router. He use this router for internet connectivity and file transfer operations between the desktops. Recently the file transfer activity between desktop (all osx based) is increased a lot so he bought a switch (no connected to the router, too far away) for transfer the file over the cable instead over the wifi. Problem: How to bind the file sharing service just to the Ethernet interface and exclude the wifi interface ? (actually the service binds to the wifi automatically and there are no options about the interface binding)

    Read the article

  • Problem transferring file to FTP server - 503 Could not create file

    - by blntechie
    I try to transfer a file from SSIS package to a FTP server provided by my client. When I try connecting and transfer using a FTP tool (WinSCP) manually it works fine and file was transferred. But when i use the ftp command in command prompt and try to transfer using "send" command i get an error "553 could not create file". This also happens from SSIS package. I'm not in control of the FTP server but if anyone can provide a solution I can pass it to the admin or anything to be done from my end?

    Read the article

< Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >