Search Results

Search found 1767 results on 71 pages for 'win7'.

Page 44/71 | < Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >

• Booting Windows7 kernel from an initrd/wim image file

  - by Ivo

  I'm wondering if it's possibile to have Win7 kernel and relative drivers (especially storage drivers) to boot from an initrd-like image file (maybe .wim?) and later then mount the windows root partition and complete the load of the full OS? I'll try to explain why: I'm running an emulated environment with NO REAL BIOS, and I'm passingthrough a raid storage controller. I want windows to boot from this controller array, but of course the BCD manager cannot access disks in the array until kernel and relative controller storage drivers are loaded. To be clear I get the classical winload.exe missing error. I need a similar solution to what Linux does, loading the kernel and his drivers, and later then mount the root partition and complete the boot. Any ideas or advices?

  Read the article

• Ubuntu 9.04 Cannot Connect to visible open wifi ap (reason 6)

  - by Andrew Bolster

  I'm travelling currently so the last network i connected successfully to was my home wpa-psk network. I hadn't tried anything until i got to my accommodation that is an open network (that I'm on now on the Win7 partition on my laptop). The network (and a similar archetypical 'linksys' open network, aswell as some protected local networks are correctly displayed in network-manager and upon selection, it happily spins around to its hearts content for a while before saying 'no chance boy'. /var/log/syslog spills out the usual combination of wpa_supplicant and kernel messages, the most interesting of are that the kernel deauthentication reason 6 response. 6 apparently means class2FrameFromNonAuthStation...Client attempted to transfer data before it was authenticated. Anyone seen anything like this? I've already tried going closer to the router to no avail. I don't remember seeing this any other time I've connected to a open AP, even if that AP is far away. (Signal strength for this AP is good, kismet says its around -57dBm, well above the threshold of -80dBm, and I've tried all the suggestions from the 'Related Questions'

  Read the article

• Windows 7: "localhost name resolution is handled within DNS itself". Why?

  - by Portman

  After 18 years of hosts files on Windows, I was surprised to see this in Windows 7 build 7100: # localhost name resolution is handled within DNS itself. # 127.0.0.1 localhost # ::1 localhost Does anyone know why this change was introduced? I'm sure there has to be some kind reasoning. And, perhaps more relevantly, are there any other important DNS-related changes in Windows 7? It scares me a little bit to think that something as fundamental as localhost name resolution has changed... makes me think there are other subtle but important changes to the DNS stack in Win7.

  Read the article

• Windows 8 - Synaptics driver - Mouse keeps freezing

  - by KickAss

  I have Win-8 Pro installed on my Dell XPS. This has Synaptic PS/2 Port TouchPad. As I upgraded the Laptop from Win7 to Win8 all my factory Mouse software (along with other preinstalled software) was all deleted. So for the mouse, I installed Windows 8/7/XP/Vista 64/32-bit Edition v16.3.15.1. Problem - every few seconds (or minutes at times), the mouse freezes. Windows is still working, it's just the mouse. I have to wait 5-15 seconds before the mouse works again. I thought this was because the Synaptic Driver I am installing is not Win-8 compatible but this is not the case. It seems the mouse freezes when Windows is working, loading or opening new programs/windows. I have the same problem in my other Laptop which has upgraded Win8 pro. This is a Dell Studio. What's causing this?

  Read the article

• Windows 7 PC browsers having trouble to open certain sites but not others

  - by user55345

  Hi, My Win7 PC these days acting very weird: Examples: It can not open bing.com, alexa.com, msdn.microsoft.com (blank page or page can not be found); It can open zdnet.com but lost all CSS layouts and pictures; It can open stackoverflow and Google no problem; I tried all three browsers (IE8, Chrome, Firefox 3.6) same thing. I didn't change anything on this PC in days. This PC does have Anti-Virus installed and updated. I'm also pretty sure it's not a network problem, because my other laptops are just fine at the same time. The only thing I can think of is it might be some auto-update stuff underneath happened without my knowledge, but I have no idea where to troubleshoot? Please shed some lights for me? Thanks a lot.

  Read the article

• Windows 7 Bootcamp to see data doubler SATA SSD in Optical Bay Connector

  - by bumble_bee_tuna

  Hi I purchased a OWC data doubler http://eshop.macsales.com/item/OWC/DDAMBS0GB/ ... Long story short it lets you add a second HD to your macbook pro in place of the cd/dvd drive (which is useless anyway, impossible to get stuff out when stuck). My current setup is 600gb intel SSD bootdrive 100gb partition for OSX / 500gb for Windows 7 Prof from Bootcamp (use 99 % of time). My desire is to have a second 300gb SSD to run disk intensive VM's off of. So I added a second 300gb intel SSD (again, NO desire to boot off of) on the sata optical port. I can see the drive no problem if I boot in to OSX, however, can't see it in disk management on Win7 ??? Any ideas similar experience ... Funny thing is I can see it in "Device Manager Disk Drivers" but not Disk Management ??? Also no I don't want to use Fusion/Parallels this is a waste of resources for me.

  Read the article

• Reimage several of the same model PC by copying the hard disk

  - by Tim Lehner

  I have several of the same machine (Dell Precision T3500) that originally came with Windows 7 Pro (there is a Windows 7 Pro OA product key sticker on top of each one). These were initially downgraded to XP by a former IT colleague, but are now back in the pool of unused machines. I am looking to format and install Windows 7 Pro on one of them using the latest official Win7 installer ISO with SP1 and then clone the hard drive to the other machines. The questions then, are: Does this even make sense, or is there a better way to do this considering I'm only doing it to 6 machines? Does this jive with MS licensing (we are the original purchaser of the machines, and thus, presumably, the license holder...but I'm no expert)? Is it possible to apply the individual 25-char product keys to the cloned machines after cloning? How far can I go in the config process (installing corporate standard apps and such) before I have to clone to the other machines considering the licensing/key questions?

  Read the article

• Force a Windows 7 user to change password when it has expired

  - by Joshua King

  Is it possible to force users (on Windows 7 PCs) to change their password once it has expired? Currently our users get notifications that their passwords will expire in 7, 3, 2 and 1 days but once the password has expired they are still able to log into their machines with the expired password. Most of our users ignore the warnings and don't change their password until we tell them they have to (when they ring Help Desk asking why their email and intranet isn't working). From memory, Windows XP machines would show a message at login that the password had expired and then offer the change password screen. Is it possible to do the same thing under Win7? Similar to how if you set a user's account to "must change password at next login" it gives the change password screen automatically.

  Read the article

• Why does my wifi fail to stay connected?

  - by Mark0978

  We have 5 different laptops in the house, 1 macbook, 1 Compaq, 3 dells, plus numerous little devices like ipods, squeezeboxs, squeezebox radios and controllers, you name it. All of them connect to and stay connected to the "downstairs" WIFI just fine. But my laptop (the most expensive of the lot) refuses to stay connected, preferring the much weaker and slower signal upstairs. My laptop is running Win7 (64 bit) Ultimate with an Intel 3945ABG WIFI contoller (It's a Dell Precision M6300). The WIFI Access Point is a Cisco WRT54G2 V1 with firmware: Firmware: DD-WRT v24-sp2 (10/10/09) micro Time: 11:11:10 up 42 min, load average: 0.06, 0.01, 0.00 WAN: Disabled

  Read the article

• Truecrypt in place decryption. Is this possible?

  - by Keyo

  I want to decrypt my entire partition and turn it back into standard NTFS. I encrypted a large partition on my 1TB drive before I took it through the airport. For this I used the in place method on truecrypt for win7. I'm on a mac now and there doesn't seem to be any way to decryppt the drive in place. It mounts fine, but I don't want to buy another drive just so I can shift files around. The drive is hooked up via USB. Would this be a problem?

  Read the article

• Using Folder Redirection GPO and Offline Files and Folders

  - by user132844

  I want to use Folder Redirection to redirect user's My Documents to a network share. First question is: What is best practices for mapping the drive? Should I use the profile tab in AD with the %username% variable, or a net use logon script, or something else? Second question is: How do I deal with laptops and syncing the network with the local storage? I want to have 2-way syncing so if they manually map their networked home drive and edit it from a different computer, it will sync the newer version to their My Documents folder the next time they connect their normal work computer. I also want to be sure that if they edit a file offline on their laptop while away from the office, that the network version syncs the changes the next time they connect that laptop. Please advise best practices for this scenario in a 2008 R2/Win7 environment. I am also interested in Mac clients for this environment, and while I am very Mac savvy, I would like to hear what others consider to be best practices for Mac network homedirs in a Win environment.

  Read the article

• Alternatives for HP ProtectTools on EliteBook 2530p

  - by AlexDuggleby

  Hi, I'd like to use the HP fingerprint sensor on my Elitebook 2530p. The system is a fresh Win7 Enterprise 64-bit and we are looking for an alternative to the HP ProtectTools Security Suite, which seems a bit bloated. We have tried the UPEK ProtectorSuite (both WBF and stand-alone edition) and they say they can't find the fingerprint device. The device shows up in device manager, in the BioMetric system configuration I have enabled logon to Windows and Domain credentials. Are there any other fingerprint login software (free or commercial) that you can recommend. Thanks in advance, Alex

  Read the article

• Why do I have only incoming traffic when copying from network source to network destination?

  - by mxp

  I have a VirtualBox VM that is located on a network share of my NAS. When I copy something from the VM's disk onto another of the NAS' network shares (so the data is visible outside the VM), the Windows 7 Task Manager shows only incoming network traffic (yellow graph). It's as if the data was only received but never sent over the network. I verified that the data arrives on the other network share. As I understand it, the data flow looks like this: +-NAS--------+ +-Win7 PC (VM Host)-+ | Share1(VM)-|>---->|-+ | | | | | | | Share2 <---|<----<|-+ | +------------+ +-------------------+ If it was like this, I would see incoming and outgoing traffic, right? What am I not getting here?

  Read the article

• Accessing network resources via vpn connection failes

  - by LikeHoo

  I already found some information on this problem here, but I still can't get it to work. Im trying to access some network resources on my server via vpn over the net. Im using a win7 home pc here and a win server 2008 rc2 with installed ras&routing role on the server. For vpn authentication I use a local user on the server with vpn-access. This user also has the rights to access to the network resources, but it neither finds the server under network nor is it able to connect the network drives... In similar topics here I found out that using the same credentials for vpn-authentication and network resources access does not work, but using different user for access didn't work either. All of these examples I found were in an active directory structure, but I don't have an active directory here. Does anyone know how to solve this problem without having to use an active directory? Thanks

  Read the article

• Getting Synergy+ to work with Windows 7 64bit and Windows XP 32bit?

  - by john crisp

  My Windows XP box is Dell 4550 dimension. Windows 7 box is Home Premium. Synergy + installs fine on the Windows 7box, but using Windows xp as the client, it won't work? Do I need to disconnect the vga connection from my monitor and control entirely from the win7 dvi connection? In setting up ( links ) on Windows 7 as the server, I have NO way of inputing info? The setup on the Windows xp box is simple and does so OK, but I can't connect to the Windows xp box! It must be the vga connection on the Windows XP box. In order to use both machines, I have to turn one off and the other on. Hence-the VGA is needed on Windows XP. Any info/help most appreciated.

  Read the article

• Not able to connect to internet in RHEL 5

  - by chankey007

  I just installed red hat enterprise 5 in my laptop and on desktop both. In desktop it is working fine but in laptop it is not showing the eth device. (I tried ifconfig only lo is there). I tried ifup eth0 still nothing happened. The network service in /etc/sysconfig/network-scripts/ifcfg-eth0 and in /etc/sysconfig/network are enable. I had ubuntu in my laptop before and I faced same problem with that too. Is there any problem with my laptop? I have my system on dual boot and in win7 networking is running fine. I am not able to connect to the internet only, other devices are working fine. System conf: Sony vaio E series. 3 GB RAM, intel core i3 2.13 GHZ.

  Read the article

• Not able to connect to internet in RHEL 5

  - by chankey007

  I just installed red hat enterprise 5 in my laptop and on desktop both. In desktop it is working fine but in laptop it is not showing the eth device. (I tried ifconfig only lo is there). I tried ifup eth0 still nothing happened. The network service in /etc/sysconfig/network-scripts/ifcfg-eth0 and in /etc/sysconfig/network are enable. I had ubuntu in my laptop before and I faced same problem with that too. Is there any problem with my laptop? I have my system on dual boot and in win7 networking is running fine. I am not able to connect to the internet only, other devices are working fine. System conf: Sony vaio E series. 3 GB RAM, intel core i3 2.13 GHZ.

  Read the article

• FoxPro 2.6 DOS on Windows 7 64-bit

  - by Rolando

  I support a company that has a very old, mission critical, FoxPro for DOS 2.6 (FPD) application. For variuos reasons the company didn't adapt/migrate their app, which, ironically, has been running even better under Windows XP (and 32-bit Win7) because the OS allowed new features like more reliable networking, distributed printing, email integration. Unfortunately for this company, most new machines now come with a 64-bit version of Windows 7, which is incompatible with their FPD app. I know this time the writing is on the wall: the only long-term solution is to migrate their app. But I wonder if anyone can suggest a temporary alternative path, which doesn't involve either: downgrade 64-bit Windows to 32-bit, or run the app on a virtualized 32-bit XP

  Read the article

• Completely clean previous Radeon drivers on Windows 7 64bit

  - by tomo

  Recently I replaced my old Radeon HD 2600XT to Radeon HD 6770 from MSI. I had strange problem that after installing the newest Radeon drivers they exist only until first reboot. After reboot my new card is recognized as an old 2600. I tried to unintall ATI/AMD software completetely from Programs/Features, then reboot, then untinstall driver from device manager, then reboot, then system showed that display driver is regular VGA (and oldschool 640x480 resolutions). Then to be double sure I executed DriverCleaner3 and Driver sweeper. After the restart I installed the newest drivers from amd site but after restarting the system recognizes card as 2600. I'm completely lost. Perhaps Win7 64bit caches somewhere drivers? Are there any issues regarding drivers-shadowing or 32/64 mirroring? Reinstalling the system is not an option.

  Read the article

• Script to set "Hide file extensions"

  - by Ickster

  I'm tired of the multi-step process to set my preferred folder options on every server to which I log on (Mostly Win2008, but also some 2012 and Win7 here and there). I'd love to be able to script the process, but unfortunately, I can't find any commands or extensions to do so for folder options. There are several settings I'd like to change, but in particular, I'd like to set "Hide file extensions for known file types" to false. I figure that if I can do that, I'll be able to manage any additional settings on my own. Methods that work on the vanilla command line would be preferred, but if there are commands in PowerShell, I'll use that.

  Read the article

• Windows 7 taskbar items not grouping properly

  - by Joel in Gö

  I don't understand the Windows 7 taskbar behaviour. For some programs it will not group the running instances, or will groups some of them but not all. I have set taskbar items to "always combine", but this has not helped. It seems to possibly be two issues: with an app that has a different taskbar icon when running than for its launcher; and for VisualStudio, when starting by double clicking a project it groups separately from when starting the IDE from the .exe. Is there any way to force the items to combine? I quite like the Win7 taskbar, and would like it to work consistently...

  Read the article

• Have you considered switch from Windows to OS X?

  - by Oscar Reyes

  For several years I wanted to move from Windows to OSX. Mainly because back then Windows95/98/2000 were terrible options. Now I have finally put my hands on this. Just when Vista and Win7 seems to redeem all the mistakes from their predecessors. The most terrible rant is the lack of the following keys: PageUp, PageDown, Home, End, Supr Not having those made my first programming day terrible on OSX. I don't regret switching, but somehow I expected something else. So: Have you considered switch to mac? What has stopped you? What is holding you back? If you have switched already, are you willing to comeback? (Now I run XP/Vista/Ubuntu/OSX in the same machine, yeah!!)

  Read the article

• What is the command to use to put your computer to sleep (not hibernate)?

  - by airrick

  I want to put my windows pc (win7) into a sleep state via command line (so i can bind to macro button on keyboard). The power button on the PC is setup to but the computer to sleep (but it's down on the floor and I'm too lazy to reach down) it exactly how I want it (sleeps using hybrid mode in case I loose power) The sleep command on the shutdown menu also works. most info I found says to use; %windir%\system32\rundll32.exe PowrProf.dll, SetSuspendState 0,1,0 But this puts the computer in hibernate mode. I do have hibernate disabled but using hybrid sleep. So, What is the command to use to put your computer to sleep (not hibernate)?

  Read the article

• Is there a way to run virt-manager on Windows?

  - by slm

  We've been using KVM for almost a year strictly on CentOS 5.x as the KVM host, with Fedora and Ubuntu workstations accessing the KVM host and its guests using virt-manager, virt-viewer, and ssh. Is anyone aware of a way to access the KVM host using virt-manager from a Windows workstation? We have one co-worker who would like to access the KVM host, from a Win7 system. EDIT #1 I'm familiar with running a X11 server on windows such as Xming, and remote displaying virt-manager from the KVM host to a windows workstation, but what I'd really like here is to know of any solutions native to windows, i.e. is there a version of virt-manager that'll run on windows.

  Read the article

• Can't connect to IIS7 on one of my machines

  - by user38974

  Hello, I have 2 computers, both running Win7 Professional x64. Computer "A" (192.168.0.10) is my work machine, it contains my tools etc. Computer "B" (192.168.0.15) is supposed to be my build server / web server for my projects I've installed IIS on "B", and installed IIS7 remote manager on "A". I'm trying to connect from A's IIS7 Manager to B's IIS but I fail. I have little knowledge of IIS, and I feel that's the main reason. I can ping B from A and get positive results so the machines do see each other. A and B are in the same workgroup but not in a domain (if that matters) - they're in my home network. What do I need to do to "see" B's IIS?

  Read the article

< Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >