Search Results

Search found 26263 results on 1051 pages for 'linux guest'.

Page 440/1051 | < Previous Page | 436 437 438 439 440 441 442 443 444 445 446 447  | Next Page >

• How do I stop ssh-agent from forgetting my password after I login to the screen session from SSH?

  - by Shwouchk

  I have a screen session open in an lxterminal window. If I SSH somewhere, the first time it happens, an ssh-agent window opens and asks me for my private key passphrase, and after that ssh goes right on. If I log in from outside to this machine and attach to the screen session however, ssh-agent now asks me every time I connect for my passphrase, in the terminal. Is there a way to avoid this and to let it continue using the X agent, or at least to have the non-X agent remember the passphrase?

  Read the article

• Access Derby for CDP Server

  - by Skudd

  I am working on a project that requires accessing the Derby database behind a CDP Backup Server. From what limited research I've been able to complete, I have found that it is possible to access Derby databases over TCP, but I'm at a complete loss for this. I'm looking to connect via PHP eventually, but first I need to know if this is at all possible with an out-of-the-box CDP server. Answers are, as always, appreciated. Thanks!

  Read the article

• Waiting for a daemontools service to stop

  - by also

  I'm running a service under daemontools that take several seconds to stop when sent the TERM signal. I need to stop it in a script, and then wait for the process to stop before continuing to take a LVM snapshot or restarting the service. Does daemontools provide a way to do this? If not, what's the best way? I was thinking of sleeping while svcok exits with 0, but it seems like this should be a common problem with an easier solution. Thoughts?

  Read the article

• Is there an email client optimized for screen readers and accessiblity?

  - by Adolfo Fitoria

  Hi. I'm currently working on a project to help visually impaired people. We're planning to use Orca screen reader for gnome. Everything is doing great but there is a problem with email web clients the most popular ones(gmail, yahoo, hotmail) are not optimized for screen readers. Is there some kind of simple email client optimized for this? Need to be very simple and straight foward and support multiple users too.

  Read the article

• HTTPS and HTTP issue on server with SSL

  - by Asghar

  I have a site www.example.com for which i purchased SSL cert and installed. And it was working fine, I also have a subdomain with app.example.com which was not on SSL. Both www.example.com and app.example.com are on same IP address. At later we decided to put SSL only on app.frostbox.com and then i configured SSL with app.frostbox.com and it worked fine, Now the issue is that Google is indexing my site as https://www.example.com/ and when users hits the web , Invalid security warning is issued and when user allow security issue they are shown my app.example.com contents. Note: I have my SSL configuration files in /etc/httpd/conf.d/ssl.conf The contents of the ssl.conf are below. NOTE: I tried solutions in .httaccess but none of those worked. Like redirecting 301 redirects etc http://pastebin.com/GCWhpQJq

  Read the article

• Table 'mysql.host' doesn't exist

  - by eriktm

  100913 10:21:29 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql /usr/local/mysql/libexec/mysqld: Table 'mysql.plugin' doesn't exist 100913 10:21:29 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 100913 10:21:29 [ERROR] Fatal error: Can't open and lock privilege tables: Table 'mysql.host' doesn't exist 100913 10:21:29 mysqld_safe mysqld from pid file /var/run/mysqld/mysqld.pid ended This is the output from the log-file for mysqld I get when I try to start mysqld with the mysqld_safe command. I tried to run mysql_upgrade to correct the first error, but this command seems to require the server to be started, which is my original problem. Next, it says that the table mysql.host does not exist. I was unable to figure out what this is caused by.

  Read the article

• How do I get rid of sockets in FIN_WAIT1 state?

  - by Gert M

  I have a port that is blocked by a process I needed to kill. (a little telnet daemon that crashed) The process was killed successfully but the port is still in a 'FIN_WAIT1' state. It doesn't come out of it, the timeout for that seems to be set to 'a decade'. The only way I've found to free the port is to reboot the entire machine, which is ofcourse something I do not want to do. $ netstat -tulnap | grep FIN_WAIT1 tcp 0 13937 10.0.0.153:4000 10.0.2.46:2572 FIN_WAIT1 - Does anyone know how I can get this port unblocked without rebooting?

  Read the article

• In a php script making /coderoot refer to /var/webroot/coderoot?

  - by Josh

  We are migrating a server and have modified the architecture slightly so that instead of /var/coderoot we now have /var/webroot/coderoot - I realize I could do a scripted find and replace, but I would rather have full unmodified reverse compatibility, or if that's unreasonable lets just say for theories sake. I tried using a symmlink ln -s /var/coderoot /var/webroot/coderoot but attempting to include a file in the code root using /var/coderoot/file does not work. I also tried using mod_alias with ScriptAlias and Alias. Neither worked. Is there anyway to do this?

  Read the article

• Fixing Broken Groups

  - by themaestro

  Hey, I just got onto a new project with the student government at my University and we're trying to get our webserver into a more workable state. The current problem is that all of us for some reason have sudo power on the server, but we can't write/create files anywhere on the server (as far as we can tell) currently. Our groups are currently as follows: /srv/ice/db$ groups goshri sshamim rmenezes goshri : goshri sshamim : sshamim ptx rmenezes : rmenezes ptx daifotis : daifotis ptx We added a few of us to ptx because we thought that might give us write access but it didn't. We have a bunch of webapps running on this server but since it's university things change hands quickly. What can we do to give us read access?

  Read the article

• credit or minclass does not work well with pam_cracklib.so in common-password (opeSuSe 11.3)

  - by Mario

  I'm trying to implement password complexities on my pdc. It's a samba PDC with openLDAP backend. I tried cracklib-check but it looks like that I should have a decent and localize version of password library since the library out there usually comes in english. I also have another consideration that we will allow users to use any kind of password - even though it's dictionary based - as long as their passwords integrated with low/upper alphabet, digits, and other characters such as '$' or '_' (pam_cracklib.so calls them as classes). So here is my /etc/pam.d/common-password: #password requisite pam_pwcheck.so nullok cracklib password requisite pam_cracklib.so minclass=4 reject_username ##password requisite pam_cracklib.so \ ## dcredit=-1 ucredit=-1 lcredit=-1 ocredit=-1 reject_username password optional pam_gnome_keyring.so use_autht_ok password required pam_unix2.so use_authtok nullok The first commented line (with #) was the default configuration of openSuse 11.3. The 2nd/3rd (with leading ##) is another configuration I use when minclass=4 line is commented out. By the way, I have 'check password script' = /usr/local/sbin/crackcheck -d /usr/share/cracklib/pw_dict and passdb backend = ldapsam:ldap://127.0.0.1 parameters in smb.conf and cracklib-check works fine too. So here is the test I conduct. I logon to windows and then change my password. Sometimes it works fine that it trows error message - which what I wanted, but simple password with only lower alphabets can pass windows change password. Maybe I should make a new library which incorporates local vocabularies, but a guy out there (raise your hand please if you read this :) ) also experienced the same trouble with english word. Besides, what we really want is to let user to choose 2 or 3 format password out of 4 classes. Is there a bug or something with pam module in openSuse 11.3? Thank you in advance. Regards, Mario

  Read the article

• ssh freezes when trying to connect to some hosts

  - by NS Gopikrishnan

  When I try to ssh to particular machine/s in a list, The SSH command happens to be freezing. I tried out setting ssh timeout. But then also it's freezes even after the timeout. In verbose mode : OpenSSH_3.9p1, OpenSSL 0.9.7a Feb 19 2003 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to x358.x.server.com [10.x.x.x] port 22. debug1: fd 3 clearing O_NONBLOCK debug1: Connection established. debug1: identity file /export/home/sqlrpt/.ssh/identity type -1 debug1: identity file /export/home/sqlrpt/.ssh/id_rsa type -1 debug1: identity file /export/home/sqlrpt/.ssh/id_dsa type 2 At this point it freezes. A work around I thought was to create a child process for each ssh calls and if the process doesn't respond after a timeout - Kill it. But are there any less complex ways, so that I can accommodate it in a shell script itself rather than going for a C/C++ program ?

  Read the article

• SSMTP to forward root@localhost mail

  - by Redconnection

  I would like to forward mail that gets sent root@localhost on multiple servers to our company admin account (e-mail is hosted on gmail) I have installed ssmtp on centos 5.5 via yum and configured it. i've also changed the last line in /etc/aliases to reflect where mail to root should go to. I've then tried sending mail to root - this gets delivered without a problem (mail -v root) I've also tried sending mail to root@localhost - this is not delivered to the specified gmail account.

  Read the article

• File permissions on web server

  - by plua

  I have just read this useful article on files permissions, and I am about to implement a as-strict-as-possible file permissions policy on our webserver. Our situation: we have a web server accessed through sftp by different users from within our company, and we have the general public accessing Apache - sometimes uploading files through PHP. I distinguish folders and files by their use. So based on this reading, here is my plan: All people who need to upload files will have separate users. But all of those users will belong to two groups: uploaders, and webserver. Apache will belong to the group webserver. Directories Permission: 771 Owner: user:uploaders Explanation: to access files in the folder, everybody needs to have execute permission. Only uploaders will be adding/removing files, so they also get r+w permission. Files within the web-root Permission: 664 Owner: user:uploaders Explanation: they will be uploaded and changed by different users, so both owner and group need to have w+r permissions. Webserver needs to only read files, so r permission only. Upload-directories Permission: 771 Owner: user:webserver Explanation: when files need to be uploaded, Apache needs to be able to write to this directory. But I figure it is safer to change the owner to webroot, thus giving Apache sufficient privileges (and all uploaders also belong to this group and will have the same permissions), while safeguarding from "others" writing to this folder. Uploaded files Permission: 664 Owner: user:webserver Explanation: after uploading Apache might need to delete files, but this is no problem because they have w+r permission of the folder. So no need to make this file any more accessible than r access for group. Being not an expert on file permissions, my question is whether or not this is the best possible policy for our situation? Any suggestions welcome.

  Read the article

• Can't mount hard drive. Ubuntu 12.04

  - by Sam

  I am trying to recover some pictures on my 320 GB Hard Disk, so I put in a Live Ubuntu CD and am in that right now. In the devices list, it shows my USB drive, but not my 320 GB Hard Disk. I can see the disk in Disk Utility (it says it's on /dev/sda), but it's not mounted, and it says it has a few bad sectors but it is OK. In Disk Usage Analyzer, it says my maximum capacity is 13.4 GB, so it's definitely not using the 320 GB Hard Disk. I tried the following: sudo mkdir /media/newhd (worked) sudo mount /dev/sda /media/newhd (didn't work. it says I must specify the filesystem type) I then tried: fsck.ext4 -f /dev/sda (didn't work. Said: Superblock invalid, trying to backup blocks. then: Bad magic number in super-block while trying to open /dev/sda. The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock) Does anyone have any ideas? The whole problem started when my Windows Vista said "Can't find operating system". Any ideas on how I can get on to my hard drive at /dev/sda?

  Read the article

• mpstat on slackware 13.0 shows no utilization

  - by conartist6

  As the title says, the mpstat command, executed on Slack 13.0 continuously shows almost no processor utilization of any sort. In fact none of the output ever seems to change at all. The system is dual processor board with two hyperthreaded P4 Xeons. Any ideas? 08:50:06 PM CPU %user %nice %sys %iowait %irq %soft %steal %idle intr/s 08:50:06 PM all 0.38 0.00 0.03 0.03 0.00 0.00 0.00 99.56 1510.46 08:50:06 PM 0 0.50 0.00 0.05 0.10 0.00 0.01 0.00 99.33 11.90 08:50:06 PM 1 0.32 0.00 0.03 0.01 0.00 0.00 0.00 99.64 0.00 08:50:06 PM 2 0.38 0.00 0.03 0.01 0.00 0.00 0.00 99.58 0.00 08:50:06 PM 3 0.29 0.00 0.02 0.00 0.00 0.00 0.00 99.68 0.00 This is, literally, the only output I can get from the program. No values change ever.

  Read the article

• Is there such a thing as a persistent ram drive?

  - by Linus

  I have a laptop with a LAMP setup. The HDD is slow, which causes my unit tests to run slowly. I was wondering whether I could mount the web root the mysql database on some kind of ramdisk. From what I have read of ramdisks, they are non-persistent. Is there anyway to create a ramdisk that writes changes to an area of the hdd when shutting down and re-mounts the ramdisk on bootup?

  Read the article

• How to Remove the Last 2 Lines of a Very Large File

  - by Russ

  I have a very large file ~400G, and I need to remove the last 2 lines from it. I tried to use sed, but it ran for hours before I gave up. Is there a quick way of doing this, or am I stuck with sed?

  Read the article

• Get the MAC addresses of all the machines connected to a LAN when NO machines have got an IP address yet

  - by JtheRocker

  Here is the real scenario. I have say 4 machines not having any IP address yet connected to a switch. In one of the machines (OS=CentOS), I would install a DHCP server and would provide the other machines IP addresses. Prior to assigning them IP addresses, I need to get the MAC address of each of the machines that I would assign IP addresses to. So, my question here is how to I get the MAC addresses of all the machines connected to a switch when NO machine has got any IP address yet? It's mandatory for my use case that I won't be having any IP addresses before the MAC addresses. -Thanks

  Read the article

• Keep Uploaded Files in Sync Across Multiple Servers - LAMP

  - by Dfranc3373

  I have a website right now that is currently utilizing 2 servers, a application server and a database server, however the load on the application server is increasing so we are going to add a second application server. The problem I have is that the website has users upload files to the server. How do I get the uploaded files on both of the servers? I do not want to store images directly in a database as our application is database intensive already. Is there a way to sync the servers across each other or is there something else I can do? Any help would be appreciated. Thanks

  Read the article

• Lots of dropped packages when tcpdumping on busy interface

  - by Frands Hansen

  My challenge I need to do tcpdumping of a lot of data - actually from 2 interfaces left in promiscuous mode that are able to see a lot of traffic. To sum it up Log all traffic in promiscuous mode from 2 interfaces Those interfaces are not assigned an IP address pcap files must be rotated per ~1G When 10 TB of files are stored, start truncating the oldest What I currently do Right now I use tcpdump like this: tcpdump -n -C 1000 -z /data/compress.sh -i any -w /data/livedump/capture.pcap $FILTER The $FILTER contains src/dst filters so that I can use -i any. The reason for this is, that I have two interfaces and I would like to run the dump in a single thread rather than two. compress.sh takes care of assigning tar to another CPU core, compress the data, give it a reasonable filename and move it to an archive location. I cannot specify two interfaces, thus I have chosen to use filters and dump from any interface. Right now, I do not do any housekeeping, but I plan on monitoring disk and when I have 100G left I will start wiping the oldest files - this should be fine. And now; my problem I see dropped packets. This is from a dump that has been running for a few hours and collected roughly 250 gigs of pcap files: 430083369 packets captured 430115470 packets received by filter 32057 packets dropped by kernel <-- This is my concern How can I avoid so many packets being dropped? These things I did already try or look at Changed the value of /proc/sys/net/core/rmem_max and /proc/sys/net/core/rmem_default which did indeed help - actually it took care of just around half of the dropped packets. I have also looked at gulp - the problem with gulp is, that it does not support multiple interfaces in one process and it gets angry if the interface does not have an IP address. Unfortunately, that is a deal breaker in my case. Next problem is, that when the traffic flows though a pipe, I cannot get the automatic rotation going. Getting one huge 10 TB file is not very efficient and I don't have a machine with 10TB+ RAM that I can run wireshark on, so that's out. Do you have any suggestions? Maybe even a better way of doing my traffic dump altogether.

  Read the article

• Which ports for IPSEC/LT2P?

  - by Matt

  I have a firewall/router (not doing NAT). I've googled and seen conflicting answers. It seems UDP 500 is the common one. But the others are confusing. 1701, 4500. And some say I need to also allow gre 50, or 47, or 50 & 51. Ok, which ports are the correct ones for IPSec/L2TP to work in a routed environment without NAT? i.e. I want to use the built in windows client to connect to a VPN behind this router/firewall.

  Read the article

• File permissions to run mysqld in chroot

  - by Neo

  I'm trying to run mysqld inside chroot environment. Herez the situation. When I run mysqld as root, I can connect to my databases. But when I run mysql using init.d scripts, mysql gives me an error. $ mysql --user=root --password=password ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (111) So I guess, I need to change file permissions of some files. But which ones? Oh and in case you are wondering '/var/run/mysqld/mysqld.sock' is owned by 'mysql' user. EDIT: strace output looks something like this [pid 20599] <... select resumed> ) = 0 (Timeout) [pid 20599] time (NULL) = 12982215237 [pid 20599] select(0, NULL, NULL, NULL, {1, 0} <unfinished ...>

  Read the article

• Wireless driver activation issue in Compaq c700 in Ubuntu 9.04

  - by Fazil

  I am using Ubuntu 9.04, I cant access my wireless driver, I activate the madwifi in administrationhardware drivers, but I could'nt activated the wireless too. when I type lspci I get the following message, ################################################## # 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 04) 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 04) 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 04) 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 04) 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 04) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f4) 00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 04) 00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 04) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 04) 01:00.0 Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01) 02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) ################################################## but when I tried in Windows I found that the driver for my laptop is ################################################ atheros AR5007 802.11b/g WiFi Adapter ################################################ so what can I do for solving this problem.

  Read the article

• Creating ip alias on bonded interface ie. bond0:1

  - by bobothechimp

  System: HP Proliant DL360 G5 running CentOS 5.4 Bonded interface is working fine for a long time. I just went to add an alias the way I always have on a regular interface, and on first check it works (pinging on the local box) but it is not accessable from outside (iptables is turned off). In addition with this setup the normal network response started to decline, hanging for around a minute before I could get a prompt on login. Here are my config files: [root network-scripts]# cat ifcfg-eth0 DEVICE=eth0 BOOTPROTO=none ONBOOT=yes MASTER=bond0 SLAVE=yes USERCTL=no [root network-scripts]# cat ifcfg-eth1 DEVICE=eth1 BOOTPROTO=none ONBOOT=yes MASTER=bond0 SLAVE=yes USERCTL=no [root network-scripts]# cat ifcfg-bond0 DEVICE=bond0 BONDING_OPTS="mode=1 miimon=100" BOOTPROTO=none ONBOOT=yes NETWORK=10.2.1.0 NETMASK=255.255.255.0 IPADDR=10.2.1.11 USERCTL=no [root network-scripts]# cat ifcfg-bond0:1 DEVICE=bond0:1 BOOTPROTO=static ONBOOT=yes NETWORK=10.2.1.0 NETMASK=255.255.255.0 IPADDR=10.2.1.12 USERCTL=no any thoughts?

  Read the article

• deploy git project and permission issue

  - by nixer

  I have project hosted with gitolite on my own server, and I would like to deploy the whole project from gitolite bare repository to apache accessible place, by post-receive hook. I have next hook content echo "starting deploy..." WWW_ROOT="/var/www_virt.hosting/domain_name/htdocs/" GIT_WORK_TREE=$WWW_ROOT git checkout -f exec chmod -R 750 $WWW_ROOT exec chown -R www-data:www-data $WWW_ROOT echo "finished" hook can't be finished without any error message. chmod: changing permissions of `/var/www_virt.hosting/domain_name/file_name': Operation not permitted means that git has no enough right to make it. The git source path is /var/lib/gitolite/project.git/, which is owned by gitolite:gitolite And with this permissions redmine (been working under www-data user) can't achieve git repository to fetch all changes The whole project should be placed here: /var/www_virt.hosting/domain_name/htdocs/, which is owned by www-data:www-data. What changes I should do, to work properly post-receive hook in git, and redmine with repository ? what I did, is: # id www-data uid=33(www-data) gid=33(www-data) groups=33(www-data),119(gitolite) # id gitolite uid=110(gitolite) gid=119(gitolite) groups=119(gitolite),33(www-data) does not helped. I want to have no any problem to work apache (to view project), redmine to read source files for project (under git) and git (doing deploy to www-data accessible path) what should I do ?

  Read the article

< Previous Page | 436 437 438 439 440 441 442 443 444 445 446 447  | Next Page >