Search Results

Search found 27870 results on 1115 pages for 'standard output'.

Page 442/1115 | < Previous Page | 438 439 440 441 442 443 444 445 446 447 448 449  | Next Page >

• 12.04 sound keeps auto-muting when idle

  - by fali

  I just installed 12.04 on an HP8510W. Everything works fine except for one weird behavior which I have noticed. When ever there is no audio playing, the audio mute indicator on the laptop is on. As soon as I start playing a you tube video the mute indicator turns off and I get sound. Here is my pulse audio output which says that the sink is suspended because it is idle: Welcome to PulseAudio! Use "help" for usage information. list-sinks 1 sink(s) available. index: 0 name: <alsa_output.pci-0000_00_1b.0.analog-stereo> driver: <module-alsa-card.c> flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY state: SUSPENDED suspend cause: IDLE I tried running alsamixer, but I don't see the auto-mute option.

  Read the article

• Windows 7 can't boot with Ubuntu on different hard drive

  - by dellphi

  I use a dual boot with two hard disks and two OS is Ubuntu 10.04 and Windows 7. Windows 7 installed on the first disk, first partition. Grub is installed on a second hard disk MBR, and Ubuntu installed on an extended partition on a second hard drive. When I select Windows 7 on the Grub menu, the HDD lamp lights up briefly and then black screen on the monitor, with the status of the keyboard is still functioning. Until now (with the default boot from first HDD), I have to press F12 to get into the Grub to run Linux on a second HDD. output of fdisk -l grub.cfg. I want to retain Grub to remain on the second HDD, and Windows 7 could choose from the menu provided by Grub. But I do not get how, I hope anyone can help.

  Read the article

• BizTalk 2009 - Size Functoid Fun

  - by StuartBrierley

  Recently when mapping a flat file from a third party source, I needed to check whether some elements had been sent with any content or not. In the source message these elements were being supplied in the form: <comment /> I though I would try using the size functoid, assuming that it would return a size of 0 for these empty elements.  What actully happens is that the Size funtoid returned a size of 1 rather than the 0 I was expecting. To get what I considered to be the correct output I needed to add a String Right Trim functoid before the Size functoid.  This then returned the "required" size of 0.

  Read the article

• Laptop won't get to grub after meddling with kernels

  - by Joren

  I recently found out I had different kernel versions installed, so I removed the 3.9 kernel as proposed in this answer on my earlier question. After that, I updated my grub, but My laptop won't seem to reach it. Output of aptitude search linux | grep ^i: i libselinux1 - SELinux runtime shared libraries i libselinux1:i386 - SELinux runtime shared libraries i linux-firmware - Firmware for Linux kernel drivers i A linux-headers-3.11.0-12 - Header files related to Linux kernel versi i A linux-headers-3.11.0-12-generic - Linux kernel headers for version 3.11.0 on i linux-headers-3.11.4-031104 - Header files related to Linux kernel versi i linux-headers-3.11.4-031104-gen - Linux kernel headers for version 3.11.4 on i linux-headers-generic - Generic Linux kernel headers i linux-libc-dev - Linux Kernel Headers for development i linux-sound-base - base package for ALSA and OSS sound system i pptp-linux - Point-to-Point Tunneling Protocol (PPTP) C i syslinux - collection of boot loaders i syslinux-common - collection of boot loaders (common files) i syslinux-legacy - Bootloader for Linux/i386 using MS-DOS flo i util-linux - Miscellaneous system utilities How do I proceed to fix this error from my live cd?

  Read the article

• Ubuntu 11.0 HDMI Video Card No 5.1 Audio

  - by ryandlf

  I am using Ubuntu and XMBC on my HTPC and have chosen the Radeon HD5570 Video card which has an HDMI output. In the sound preferences there is no surround sound option for the video card just stereo and although I can get sound through it in XBMC, my receiver does not state Dolby Digital on movies that are in fact Dolby so its definitely not giving me the true sound it should. Does this card not support surround sound through HDMI and I somehow missed it? If that is the case does anyone have suggestion that has been tested and works? Id like to know its going to work before investing in yet another video card.

  Read the article

• Unable to boot OS X after installing Ubuntu 12.04

  - by A G

  I installed Ubuntu 12.04 on my MB (aluminium late 2008). After installing Ubuntu I am unable to boot into OS X. Sequence of events: Install reFit on OS X Install Ubuntu on a partitioned drive. I also installed grub. Now when I boot my MB only the grub menu shows up. When I select OS X under grub I see a black screen for a while and the machine restarts (when selecting OS X 64 bit) or it hangs indefinitely(OS X 32 bit). Could you please help? Link to output of boot info script. http://paste.ubuntu.com/1028017/

  Read the article

• How to xkill an application by its id?

  - by Hanynowsky

  I need to simulate the behavior of the keyboard shortcut (ALT+F4) using Terminal for a given application. If I open for example gedit and click ALT + F4 , then GEDIT will be xkilled. If I want to achieve same thing using Terminal, how should I proceed? The command export PIDTOKILL=pidof gedit | grep [^*]; xkill -id $PIDTOKILL does not work and gives the following error: xkill: killing creator of resource 0x3f38 X Error of failed request: BadValue (integer parameter out of range for operation) Major opcode of failed request: 113 (X_KillClient) Value in failed request: 0x3f38 Serial number of failed request: 8 Current serial number in output stream: 9 I think I am confusing application id and process id here

  Read the article

• SSD becomes hot, disk failure warning

  - by Aegluin

  I have a two weeks old SSD (Kingston SSDnow 64GB). Yesterday, the computer shutdown twice and after rebooting I was bombarded with disk failure warnings. I usually take such warnings serious (and backed up), but skeptical. After cooling down, the laptop boots again and the only red Smart value was the temperature (Ubuntu did not show the temperature of failure, but the at that time 29°). After refreshing the Smart status and doing a "self test", everything is green. Before contacting Kingston support, I would like to know whether it could be due to a software issue: Is it possible that it is false alarm, and how can I check? I installed Ubuntu 12.04 32bit and took care of alignment. I supposed Ubuntu set up with optimal settings for SSDs, how can I check that there was no mistake? The current temperature is around 40-56°. Is such a temperature abnormal for SSDs? Output of sudo smartctl --all /dev/sda: http://pastebin.ubuntu.com/1175940/

  Read the article

• Commenting/In-Code Documentation Styles

  - by Maxpm

  This might be a stupid question, but it's been in the back of my head for a while and I can't find a decent answer anywhere else. I have a teacher who says we should explicitly list each parameter with a description, even if there's only one. This leads to a lot of repetition: double MyFunction(const int MyParam); // Function: MyFunction // Summary: Does stuff with MyParam. // Input: int MyParam - The number to do stuff with. // Output: MyParam with stuff done to it. When writing in-code documentation, how detailed are you?

  Read the article

• pulseaudio: no microphone configuration

  - by mitsch

  Updated Ubuntu to precise from oneiric on a Dell Inspirion Mini 10 (with an Intel HDA-Soundcard). I can't remember having any issues with the microphone. I didn't need it - I tried ekiga the first time in precise. I couldn't hear any sound in the echo test of ekiga, so I switched to the "System Preferences" and looked for the microphone to boost it. Surprisingly, the microphone input was greyed out - I couldn't mute or unmute, i couldn't even move the volume-slider. On the other hand: I could change the microphone-setting on console with alsamixer, so don't worry about that… :) I just wanted to ask, how to get pulseaudio back to the known, comfortable behaviour. Some newbies won't know the trick to use alsamixer… My soundcard (output of lspci): 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) Greets!

  Read the article

• Cocos2d: carom like game

  - by Raj

  Now I am working on carrom like game using cocos2d+Box2d. I set world gravity(0,0), want gravity in z - axis. I set following value for coin striker body: Coin body: density = 20.0f; friction = 0.4f; restitution = 0.6f; Shape Circle with radius - 15/PTM_RATIO Striker body: density = 25.0f; friction = 0.6f; restitution = 0.3f; Shape Circle with radius - 15/PTM_RATIO Output is not smooth, when I apply ApplyLinearImpulse(force,position); Coin movement looks like floating in air....takes too much time to stop... Which value of coin and striker makes it look like real carom?

  Read the article

• 11.10 does not restore open apps in hibernate, works like shutdown

  - by jiewmeng

  I noticed that my 11.10 does not hibernate. When I hibernate, and starts PC, it doesn't restore all my open apps etc. Its like a shutdown ... why might that be? UPDATE Output from gsettings http://pastie.org/2926504 Using a vanilla Ubuntu Desktop 11.10 installed yesterday (no more from alternate CD, but problem still persists) I dont see any options in BIOS for S1, S3 or ACPI, are they hidden somewhere? I am using ASUS H67 Evo, I entered the Advanced mode of the BIOS, I still dont see those stuff ps-*.log files: http://pastie.org/2922774 GRUB entry: http://pastie.org/2922781

  Read the article

• How can I get my wireless webcam to work?

  - by hellocatfood

  I recently bought this wireless webcam. I'm having trouble getting it to work on Ubuntu 11.04. I ran lsusb and got the folowing information about the device Bus 006 Device 003: ID 0416:a91a Winbond Electronics Corp. I did a Google serach for teh device ID and this website informs me that it matches the LogiLink Wireless Webcam (so Maplin probably just rebranded this!). What this website states is that this device should work, which it doesn't. The problem I'm facing is that I don't get any actual video being streamed or shown. The built in microphone works and, when running Cheese, when I press the camera button on the webcam itself the software recognises that the button is pressed. On that note, when running cheese from the terminal with this webcam attached I get the following error libv4l2: error getting pixformat: Invalid argument libv4l2: error setting pixformat: Input/output error Any help is appreciated

  Read the article

• Getting wireless to work on Ubuntu 11.10 (on a mac machine)

  - by yayu

  I have a 2008 white 13.3 inch macbook that now solely runs ubuntu. However, I cannot get wifi or cable to work on it. Regarding the cable, it atleast tries to connect but eventually disconnects from the wired network. Here is the output for lspci (pastebin) I tried installing b43-fwcutter and firmware-b43 but get errors. (I loaded them from a thumb drive and tried sudo dpkg -i). I cannot understand these instructions from the documentation, as I cannot locate the pool directory. b43-fwcutter is located on the Ubuntu install media under ../pool/main/b/b43-fwcutter/ and patch is located under ../pool/main/p/patch/ or both in the official repositories online. Note: In some versions (10.04 and 11.04 at least) there is not a /pool/main/p/patch/ If this file is missing then you don't need it. In this case you only need to install /pool/main/b/b43-fwcutter by following the instructions below.

  Read the article

• Keep trying to install always throws error help!

  - by Hector Soto

  So I was installing 12.10 on my Asus g74sx laptop... Did everything the tutorial told me to do yet I keep getting an error saying that there was an error of input/output.. That I should check the hard drive and see if it needs replacement. I tried with 2 DVDs and did format twice my usb to fat 32 and mounted the image file for 12.10... No idea what is going on. Please help! Mmm I cannot add an image... I'll comment with the link to the error!

  Read the article

• How can I use smbclient to connect to Windows shares by hostname when a firewall is enabled?

  - by skyblue

  I can't connect to file shares on Windows computers using smbclient -L //hostname when the firewall is enabled. This occurs whether I'm using ufw (which allows outgoing traffic and replies back in with the default configuration) or iptables (where I'm allowing outgoing traffic and replies back in with iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT). However, smbclient -L //ip-address works whether the firewall is enabled or not. I also tested this against a Samba server running on Ubuntu and again smbclient -L //hostname does not work when the firewall is enabled, but smbclient -L //ip-address works whether the firewall is enabled or not. For reference, here are the iptables rules I used during testing: *filter :INPUT DROP [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -d 224.0.0.251/32 -p udp -m udp --dport 5353 -j ACCEPT COMMIT

  Read the article

• Issue with text in a Intel 82945G Express Chipset Family

  - by user34681

  I am on Ubuntu 11.04 and the text in all the applications often looks with visual artifacts. I have installed xserver-xorg-video-intel. Attached a image so you can appreciate. lshw -c video output: *-display description: VGA compatible controller product: 82945G/GZ Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 02 width: 32 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:16 memory:dfe00000-dfe7ffff ioport:8800(size=8) memory:e0000000-efffffff memory:dfe80000-dfebffff In the text selected in green you can see the 'Online', 'File' and 'hassle' words cut.

  Read the article

• I can't get a native resolution of 1920x1080 on 11.10 (AOC f22 on a Nvidia Geforce GTS 450)

  - by Mikeeeee

  I have a problem were the highest resolution I can get is 1360x769, this is a 22 inch LCD monitor with a native resolution of 1920x1080_60 I have tried numerous drivers but nothing changed I tried editing the xorg.conf scipt with no success (I am a noob with linux though). Running many commands in terminal witch I got from people with similar problems only gives me errors like "Failed to get size of gamma for output default. I get edid checksum is invalid error on boot down also. I think there maybe a communication problem between my screens EDID and ubuntu although xp and windows 7 detect my screen without any errors and automatically set native resolution. also when I am installing ubuntu I get a horrible screen flashing every few seconds until I have installed the nvidia driver. pc specks if it helps x64 os, mainboard N68PV-GS, 4 gig ram, AMD Phenom(tm) 9350e Quad-Core Processor × 4, Nvidia Geforce gts450 512mb, hard drives set up in a onboard nvidia raid array striped. realy need to get a better resolution, 1360x769 does not look nice on a 22 inch screen. ty

  Read the article

• Monitor not recognised after apt-get upgrade on 11.10 - maximum 1024x768 resolution

  - by Josh

  I did an apt-get upgrade through update manager on 11.10. After restarting my VGA monitor is no longer recognised and I can only get a maximum of 1024x768 on a 1440x900 monitor. I can't find xorg.conf so I am pretty lost! xrandr output: Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096 VGA-0 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1024x768 60.0* 800x600 60.3 56.2 848x480 60.0 640x480 59.9 DVI-0 disconnected (normal left inverted right x axis y axis) S-video disconnected (normal left inverted right x axis y axis)

  Read the article

• Non-mathematical Project Euler (or similar)?

  - by Juha Untinen

  I checked the post (Where can I find programming puzzles and challenges?) where there's a lot of programming challenges and such, but after checking several of them, they all seem to be about algorithms and mathematics. Is there a similar site for purely logic/functionality-based challenges? For example: - Retrieve data using a web service - Generate output X from a CSV file - Protect this code against SQL injection - Make this code more secure - What is wrong with this code (where the error is in logic, not syntax) - Make this loop more efficient Does a challenge site like that exist? Especially one that provides hints and/or correct solutions. That would be a very helpful learning site.

  Read the article

• FFmpeg multi pass encoding

  - by Levan

  Sorry, I am really new to this, and have problems doing some tasks without help. So I have a terminal command: ffmpeg \ -y \ -i '/media/levan/BEEA60D8EA608E89/Downloads/Videos/Tony Braxton - Un-Break My Heart.VOB' \ -s 1920x1080 \ -aspect 16:9 \ -r 25 \ -b 15550k \ -bt 19792k \ -vcodec libtheora \ -acodec libvorbis \ -ac 2 \ -ar 48000 \ -ab 320k \ ddd.ogg and I want to have 3 pass video in output video, but how do I accomplish this? I found that I must write -pass n command some where, but where to write it I do not know. I tested this and wrote -pass 3 at the end but then the terminal just showed a > symbol.

  Read the article

• Configuring trace file size and number in WebCenter Content 11g

  - by Kyle Hatlestad

  Lately I've been doing a lot of debugging using the System Output tracing in WebCenter Content 11g.  This is built-in tracing in the content server which provides a great level of detail on what's happening under the hood.  You can access the settings as well as a view of the tracing by going to Administration -> System Audit Information.  From here, you can select the tracing sections to include.  Some of my personal favorites are searchquery,  systemdatabase, userstorage, and indexer.  Usually I'm trying to find out some information regarding a search, database query, or user information.  Besides debugging, it's also very helpful for performance tuning. [Read More] 

  Read the article

• "Unable to connect" to getdeb.net, how do I fix it?

  - by Nirmik

  i want to know what this error means and how to fix it? The following is the output on the terminal- W: Failed to fetch http://archive.getdeb.net/ubuntu/dists/precise-getdeb/Release.gpg Unable to connect to archive.getdeb.net:http: W: Failed to fetch http://archive.getdeb.net/ubuntu/dists/precise-getdeb/apps/binary-i386/Packages Unable to connect to archive.getdeb.net:http: W: Failed to fetch http://archive.getdeb.net/ubuntu/dists/precise-getdeb/apps/i18n/Translation-en_IN Unable to connect to archive.getdeb.net:http: W: Failed to fetch http://archive.getdeb.net/ubuntu/dists/precise-getdeb/apps/i18n/Translation-en Unable to connect to archive.getdeb.net:http: E: Some index files failed to download. They have been ignored, or old ones used instead.

  Read the article

• Unable to use Hardware Acceleration for Radeon HD 6490M card

  - by user62004

  I've followed steps in this guide. Here is output of 'vainfo' command: libva: VA-API version 0.32.0 libva: va_getDriverName() returns 0 libva: Trying to open /usr/lib/x86_64-linux-gnu/dri/i965_drv_video.so libva: va_openDriver() returns -1 vaInitialize failed with error code -1 (unknown libva error),exit I have Catalyst 12.6 driver installed (from debs). Also I've fixed switchable graphics bug, using this guide (STEP 2). I've tried to add 'LIBVA_DRIVER_NAME=xvba LIBVA_DRIVERS_PATH=/usr/lib/va/drivers' to /etc/environment and rebooted system, but the result was the same. PLEASE HELP! :) Thanks! :]

  Read the article

• PHP NOT EXECUTING IN PHP-FPM AND NGINX INSTALLATION

  - by nairobicoder

  I am trying to set up nginx server to run a php app in debian. I followed this tutorial among others. Most seems the same. My recent configuration is based on the link above. When I try to run this php script, <?php phpinfo(); ?> I get the same output on the browser instead of php info result. Kindly someone help me figure out where I went wrong. Note: My error logs are clean,contains details on nginx server start only. Thank you.

  Read the article

< Previous Page | 438 439 440 441 442 443 444 445 446 447 448 449  | Next Page >