Search Results

Search found 13151 results on 527 pages for 'performance counters'.

Page 443/527 | < Previous Page | 439 440 441 442 443 444 445 446 447 448 449 450  | Next Page >

• Best CPUs for speeding up compiling times of C++ w/ DistGCC

  - by Jay

  I'm putting together a distributed build farm with DistGCC to speed up our teams compile times and just looking for thoughts on which processors to use in the hosts. Are we going to get a noticeable decrease in time using 8 cores vs. 4-hyperthreaded cores? Big difference in time between i7 and Xeon? etc, etc. Just need advice from people who've put together kick-a build clusters. We've got a majority of the normal things to speed up builds in place (pre-compiled headers, ccache, local gigabit connections between them, tons of ram, etc) so please just give advice on the best processor to use. And money is a factor, but anythings doable if the performance increase is noticeable. Thanks. Jay EDIT: Although any advice IS welcome, please refrain from "Do this first" posts as we're not planning on skimping on things like SSD, maxed out RAM, etc. My personal system is a iMac Quad-core i5 with 8GB of RAM. When I build our project locally, my processor floats around 99-100% a majority of the time, which makes me assume it is a bottleneck, even if you made everything else faster. My ram on the other hand doesn't even get close to maxing out. It's also worth noting that I did research this, however every discussion I could find was primarily for gaming machines, which is obviously a different beast in usage. These machines won't even have monitors or anything but integrated graphics since they have one purpose: Build freakin fast. (hopefully)

  Read the article

• Best CPUs for speeding up compiling times of C++ w/ DistGCC

  - by Jay

  I'm putting together a distributed build farm with DistGCC to speed up our teams compile times and just looking for thoughts on which processors to use in the hosts. Are we going to get a noticeable decrease in time using 8 cores vs. 4-hyperthreaded cores? Big difference in time between i7 and Xeon? etc, etc. Just need advice from people who've put together kick-a build clusters. We've got a majority of the normal things to speed up builds in place (pre-compiled headers, ccache, local gigabit connections between them, tons of ram, etc) so please just give advice on the best processor to use. And money is a factor, but anythings doable if the performance increase is noticeable. Thanks. Jay EDIT: Although any advice IS welcome, please refrain from "Do this first" posts as we're not planning on skimping on things like SSD, maxed out RAM, etc. My personal system is a iMac Quad-core i5 with 8GB of RAM. When I build our project locally, my processor floats around 99-100% a majority of the time, which makes me assume it is a bottleneck, even if you made everything else faster. My ram on the other hand doesn't even get close to maxing out. It's also worth noting that I did research this, however every discussion I could find was primarily for gaming machines, which is obviously a different beast in usage. These machines won't even have monitors or anything but integrated graphics since they have one purpose: Build freakin fast. (hopefully)

  Read the article

• Best CPUs for speeding up compiling times of C++ w/ DistGCC

  - by Jay

  I'm putting together a distributed build farm with DistGCC to speed up our teams compile times and just looking for thoughts on which processors to use in the hosts. Are we going to get a noticeable decrease in time using 8 cores vs. 4-hyperthreaded cores? Big difference in time between i7 and Xeon? etc, etc. Just need advice from people who've put together kick-a build clusters. We've got a majority of the normal things to speed up builds in place (pre-compiled headers, ccache, local gigabit connections between them, tons of ram, etc) so please just give advice on the best processor to use. And money is a factor, but anythings doable if the performance increase is noticeable. Thanks. Jay EDIT: Although any advice IS welcome, please refrain from "Do this first" posts as we're not planning on skimping on things like SSD, maxed out RAM, etc. My personal system is a iMac Quad-core i5 with 8GB of RAM. When I build our project locally, my processor floats around 99-100% a majority of the time, which makes me assume it is a bottleneck, even if you made everything else faster. My ram on the other hand doesn't even get close to maxing out. It's also worth noting that I did research this, however every discussion I could find was primarily for gaming machines, which is obviously a different beast in usage. These machines won't even have monitors or anything but integrated graphics since they have one purpose: Build freakin fast. (hopefully)

  Read the article

• Will Parallel-port dongle work on USB-to-Parallel Adapter?

  - by Gary M. Mugford

  We have a niche program running on a Win2K laptop that uses a security dongle connected to a parallel port for authentication. The laptop is getting creaky and I spent a frustrating night last night shopping various websites for a new laptop that had a parallel port. Seems I'm about three years late [G]. The question I have, is, if I buy a new(ish) laptop and use a USB-to-Parallel Port adapter, will the security dongle work? I know I'm not being specific about the app, but it's one most people wouldn't have heard of anyways. I've been guessing the answer to my question is no, since the app won't know to send a request out to the non-existent port. But, if the process actually is that the dongle sends a message INTO the computer every now and then, then it might work. And, I'm not sure whether the dongle is only needed at program startup time or randomly. The dongle is a 'permanent' addition to the old laptop. This is all about the money. We can have a newly-updated version of the program (which won't add any features we need) for the princely sum of $2700. Or we can spend $500 on a refurbed laptop still running WinXP, add a 30 buck adapter and keep the same solid, stolid performance we've come to appreciate. But it all comes down to the dongle behaviour. Oh, and a dock won't work. The whole laptop issue is about moving about the various nooks and crannies of the building with laptop in hand. Thanks for any suggestions/guidance. GM

  Read the article

• How to get an ARM CPU clock speed in Linux?

  - by MiKy

  I have an ARM-based embedded machine based on S3C2416 board. According to the specifications I have available there should be a 533 MHz ARM9 (ARM926EJ-S according to /proc/cpuinfo), however the software running on it "feels" slow, compared to the same software on my Android phone with a 528MHz ARM CPU. /proc/cpuinfo tells me that BogoMIPS is 266.24. I know that I should not trust BogoMIPS regarding performance ("Bogo" = bogus), however I would like to get a measurement on the actual CPU speed. On x86, I could use the rdtsc instruction to get the time stamp counter, wait a second (sleep(1)), read the counter again to get an approximation on the CPU speed, and according to my experience, this value was close enough to the real CPU speed. How can I find the actual CPU speed of given ARM processor? Update I found this simple Pi calculator, which I compiled both for my Android phone and the ARM board. The results are as follows: S3C2416 # cat /proc/cpuinfo Processor : ARM926EJ-S rev 5 (v5l) BogoMIPS : 266.24 Features : swp half fastmult edsp java ... #./pi_arm 10000 Calculation of PI using FFT and AGM, ver. LG1.1.2-MP1.5.2a.memsave ... 8.50 sec. (real time) Android # cat /proc/cpuinfo Processor : ARMv6-compatible processor rev 2 (v6l) BogoMIPS : 527.56 Features : swp half thumb fastmult edsp java # ./pi_android 10000 Calculation of PI using FFT and AGM, ver. LG1.1.2-MP1.5.2a.memsave ... 5.95 sec. (real time) So it seems that the ARM926EJ-S is slower than my Android phone, but not twice slower as I would expect by the BogoMIPS figures. I am still unsure about the clock speed of the ARM9 CPU.

  Read the article

• Windows XP, Preference menu's hidden for many programs

  - by Jestep

  I don't know when this started happening, but it has been several months since I first noticed it. Basically, when I go to a preferences menu of some programs, the preferences window is completely hidden, but the program see's it as being open. This prevents me from interacting with the preferences and the actual program. So far I've noticed it on Adobe Illustrator and Netbeans. Illustrator when I select edit - Preferences - An Option. On Netbeans it happens when I right click on a site and select properties. Here's a link to a screen shot after I click on the preferences menu (I don't have enough points to post an image yet): http://www.jestep.com/images/screen-2.jpg. Note that the main workspace is grayed out. I have to hit Escape to close the hidden preferences window. I've tried unstinstalling, completely wiping the registry of any trace of the program and reinstalling. Thought it may have been a multi-monitor issue when I switched from 2 monitors down to 1, but menu's were not on other monitor when I plugged one back in. I've reset workspaces, windows display, windows performance settings, changed resolution, safe mode, everything I can think of. I cannot figure out what would cause the same problem on completely unrelated software, and I cannot reset it by reinstalling. Any help would be greatly appreciated.

  Read the article

• LSI 9260-8i w/ 6 256gb SSDs - RAID 5, 6, 10, or bad idea overall?

  - by Michael Pearson

  We're provisioning a new production server for our reasonably busy website. Our choice of host have available a 6 drive configuration with a LSI 9260-8i card. My initial thought was to fill all six bays with SSDs (Intel 520 256gb) and set them up in RAID. Good, bad, or terrible idea? Can the card handle it? Should we be using RAID 5, 6 or 10? This would be the first time the provider have filled all six slots for this rackmount with SSDs, so they're a bit hesitant. I'm wondering if somebody else with this card has done something similar in a production environment. We do about 43gb of writes per day and currently use about 300gb of storage. The server acts as webserver, database, and image store for approx 1 million files. The plan is to underprovision the SSDs by approximately 10% to 20% to increase their overall lifespan & performance. The fallback option is 2x480gb SSDs in RAID 1 and another 2x1TB HDDs in RAID 1. The motivation behind this is that the server rental cost difference between 2xSSDs and 6xSSDs is minimal (compared to the overall cost of the rental). We do not have any special high-IOPs requirements. However, if the configuration is known to work, I don't see a good reason to not use it and not have to worry about having separate 'fast and small' and 'slow and large' disks.

  Read the article

• Group Policy installation failed error 1274

  - by David Thomas Garcia

  I'm trying to deploy an MSI via the Group Policy in Active Directory. But these are the errors I'm getting in the System event log after logging in: The assignment of application XStandard from policy install failed. The error was : %%1274 The removal of the assignment of application XStandard from policy install failed. The error was : %%2 Failed to apply changes to software installation settings. The installation of software deployed through Group Policy for this user has been delayed until the next logon because the changes must be applied before the user logon. The error was : %%1274 The Group Policy Client Side Extension Software Installation was unable to apply one or more settings because the changes must be processed before system startup or user logon. The system will wait for Group Policy processing to finish completely before the next startup or logon for this user, and this may result in slow startup and boot performance. When I reboot and log in again I simply get the same messages about needing to perform the update before the next logon. I'm on a Windows Vista 32-bit laptop. I'm rather new to deploying via group policy so what other information would be helpful in determining the issue? I tried a different MSI with the same results. I'm able to install the MSI using the command line and msiexec when logged into the computer, so I know the MSI is working ok at least.

  Read the article

• Least CPU intensive way of streaming your screen on windows?

  - by sinni800

  Hello, sometimes I like capturing my screen for others to see. Only thing: I am playing games while I do it. I have tried a few streaming solutions where Windows Media Encoder coupled with my own Windows server appealed to me most, because I can change resolutions, etc. I also tried ustream coupled with the Flash applet and the Adobe Flash Encoder recording a Camtasia source. Camtasia has the disadvantage though that it shows the green-and-black-alternating borders and can not be targeted fullscreen. I like how xfire does it. But it doesn't work with every game, many are simply not supported. A few thoughts about this: Is there a program which captures like Fraps or XFire (based on Direct3D and OpenGL outputs) and exposes the output to a DirectShow source filter? Which brings me to: Is there hardware accelerated capturing directly from the graphics card? Maybe including direct encoding with help from OpenCL? Modern graphic cards decode BluRay content directly for example. I should have a modern enough graphics processor for this to be possible (see below). If using Windows Media Encoder: Which are the least CPU intensive settings? Which codec? Is there a newer codec than Windows Media 9? Is it less CPU intensive? I only have 7, 8 and 9 inside the Encoder Could the performance be massively increased by having a Quad-Core CPU (see below)? Bandwidth is no problem up to 1000 to 1500 kbit/s (I have 2048). My Computer specs: Intel Core 2 Duo E8400 4 GB DDR2-800 Ram Ati Radeon HD5770 Using Windows 7 Professional

  Read the article

• Updated XAMPP with MySQL, all my tables are missing

  - by user371699

  I just updated XAMPP to a newer version, which included updating MySQL from 5.5 to 5.6. Using phpMyAdmin, however, all of my tables within my databases still appear on the left navigation panel, but the main window shows that all my databases are empty (except for information_schema, and a couple other default tables.) Clicking on a table in the navigation panel gives me a "table doesn't exist" message. It does looks like information_schema.tables doesn't have my tables, either. Can anyone assist me with this? I did make a complete backup of all my databases before the upgrade, but I first want to see if I can fix this the "normal" way. Furthermore, I'm not sure if the MySQL upgrade involved making changes to the information/performance databases, so I don't know if I can restore the old ones. Thank you. EDIT: Continuing my searching, I realized that only the INNODB databases are missing. I've tried running the following with no avail: /opt/lampp/bin $ sudo ./mysql_install_db --basedir=/opt/lampp and /opt/lampp/bin $ sudo ./mysql_install_db --basedir=/opt/lampp --datadir=/opt/lampp/var/mysql The my.cnf file in /opt/lampp/etc contains the following InnoDB settings: innodb_data_home_dir = /opt/lampp/var/mysql/ innodb_data_file_path = ibdata1:10M:autoextend innodb_log_group_home_dir = /opt/lampp/var/mysql/ # You can set .._buffer_pool_size up to 50 - 80 % # of RAM but beware of setting memory usage too high innodb_buffer_pool_size = 16M # Deprecated in 5.6 #innodb_additional_mem_pool_size = 2M # Set .._log_file_size to 25 % of buffer pool size innodb_log_file_size = 5M innodb_log_buffer_size = 8M innodb_flush_log_at_trx_commit = 1 innodb_lock_wait_timeout = 50 What could possibly be wrong? Why is the information_schema not updating correctly? It looks like /opt/lampp/var/mysql has all my tables in it within the database directories, but they're still not showing up in information_schema.

  Read the article

• 32 core (each physical core) 2.2 GhZ or 12 core (6 physical cores) 3.0GHZ?

  - by Tejaswi Rana

  I am working on a multithreaded application (Forex trading app built on C#) and had the client upgrade from the 12 core 3.0GHZ machine (Intel) to a 32 core 2.2 Ghz machine (AMD). The PassMark benchmark results were significantly higher when using multicores doing Integer, Floating and other calculations while for a single core calculation it was a bit slower than the pack (others that were being compared to with similar config as the 12 core one). Oh it also comes with 64 GB RAM (4 times as the other one) and a much faster SSD. So after configuring and running the application on that machine, not only did it not perform as well, it was significantly slower. We're talking about 30seconds - 1 minute slower on an app that usually completes processing within 5-20 secs. The application uses MAX DEGREE of PARALLELISM (TPL) which I've tried setting to number of cores and also half of that. I've also tried running single threaded and without setting any limits in parallel threading. While it may be the hardware has some issues, I am wondering if the CPU processing speed is the issue. I can overclock to 3.0 GHZ. But is that even a good idea? Server Info - AMD http://www.passmark.com/forum/showthread.php?4013-AMD-Dual-6272-performance-is-60-lower-than-benchmarks Seems that benchmark was wrong to start with - officially. Intel i7 3930k OS (same in both) Windows 7 Professional 64-bit

  Read the article

• I need help choosing between two configurations of the Dell Studio 14

  - by Adnan

  There are two configurations of the Dell Studio 14 (1458) which I'm looking at: Config 1: Core i7-720QM @ 1.6 GHz; ATI Mobility Radeon HD 5450 1GB; 4gb DDR3 RAM @ 1066 MHz; 500 GB SATA HDD @ 7200 RPM; Price: $999 Config 2: Core i5-430M; ATI Mobility Radeon HD 4530 512MB; 4GB DDR3 RAM @ 1066 MHz; 500 GV SATA HDD @ 7200 RPM; Price: $874 What I want to know is, would config 1 still be able to do decent gaming (maybe some Starcraft II), and is there a great performance difference between the i5 and i7 processors? Is the $130 extra worth it for the i7 and better graphics card? I do more than just basic computing. I plan on getting into web design (specifically using Photoshop and Dreamweaver), and I wish to do gaming. I know Conifg 1 is the better value, but I want to be sure that the $130 more is truly worth it. I dont have too much money and want to spend wisely as possible, yet I am a computer geek and plan on doing a lot more than the average user.

  Read the article

• Windows 7 Loading Very Slow

  - by Adnan

  Hi guys, I've had a problem that only started to occur yesterday. When I boot into Windows 7 and log on to my user account, the computer gets very laggy and slow for at least 5 minutes. Icons take ages to load, and everything is rendered unclickable. This happens for about five minutes after which everything goes back to normal. I tried restarting a few times to see if this is a recurring problem, and it is. I ran a full system scan with Microsoft Security Essentials and found nothing wrong, and I also defragmented the disk to increase performance. However, the problem still exists. Edit: For the past day, I've been trying to install Ubuntu on the same laptop. When installing it on a partition didn't work, I decided to use Wubi. Could this somehow be the problem? Also, my hard drive gets hot a lot, so could the heat be affecting the hard drive and maybe making it defective? Any help on this issue would be greatly, greatly appreciated.

  Read the article

• Streaming to PS3 with NAS and built-in dlna server?

  - by philt

  With consumer-grade hardware, is it possible to successfully stream 1080p mp4 videos to a PS3? I have a linksys router that can only do 10/100. The PS3 is wired to it with cat5e cable, and the PS3 itself supports gigabit ethernet. I would upgrade the router and get one that supports gigabit ethernet if it could handle streaming like this. It currently does work with minor jerkiness streaming from my mac to the PS3, but fast-forward/reverse and "goto" (equivalent of scene selection) take forever and/or fail completely. And streaming from my mac of course requires the mac to be on at all times. When I put the movies on an external USB drive and connect to the PS3 directly, it performs flawlessly. Fast forward and everything works great. So I was thinking about getting a NAS, but I don't know if any inexpensive NAS (i.e. Buffalo Linkstation Live, WD My Book World Edition, D-Link DNS-321, etc.) can actually deliver the performance necessary to do this, even with gigabit ethernet?

  Read the article

• Why are my socks proxies slow

  - by vps_newcomer

  I have a linux vps, and i have tried a few socks proxy setups to test their performance: All tests were using speedtest.net The standard ssh tunnel proxy 0.8mbit/s download and 0.1-0.2mbit/s upload speeds dante-server proxy 1.3mbit/s download and 0.4-0.5mbit/s upload I am wondering why are these speeds so slow? Is anything shaping them? Is it just the nature of socks proxies? I know that the ssh tunnel has to do encryption and what not so that is why its slow, but i was surprised to see that the second setup was also quite slow. On the VPS i have received download speeds of 25MB/s per second (thats about 200mbit/s and upload speed of atleast 5MB/s (haven't got a good enough pipe to test anything faster). The other option i was going to try is to setup OpenVPN and see how that goes, however i need to find a good tutorial as it's fairly complicated to setup. So why is it so slow? How can i test to see where the bottleneck is? How can i make it faster :D

  Read the article

• Defeating the RAID5 write hole with ZFS (but not RAID-Z) [closed]

  - by Michael Shick

  I'm setting up a long-term storage system for keeping personal backups and archives. I plan to have RAID5 starting with a relatively small array and adding devices over time to expand storage. I may also want to convert to RAID6 down the road when the array gets large. Linux md is a perfect fit for this use case since it allows both of the changes I want on a live array and performance isn't at all important. Low cost is also great. Now, I also want to defend against file corruption, so it looked like a RAID-Z1 would be a good fit, but evidently I would only be able to add additional RAID5 (RAID-Z1) sets at a time rather than individual drives. I want to be able to add drives one at a time, and I don't want to have to give up another device for parity with every expansion. So at this point, it looks like I'll be using a plain ZFS filesystem on top of an md RAID5 array. That brings me to my primary question: Will ZFS be able to correct or at least detect corruption resulting from the RAID5 write hole? Additionally, any other caveats or advice for such a set up is welcome. I'll probably be using Debian, but I'll definitely be using Linux since I'm familiar with it, so that means only as new a version of ZFS as is available for Linux (via ZFS-FUSE or so).

  Read the article

• lxc bandwidth control using tc

  - by kumar

  I am trying to restrict bandwidth inside my containers. I have tried using the following commands , But I think it is not getting effective. cd /sys/fs/cgroup/net_cls/ echo 0x1001 > A/net_cls.classid # 10:1 echo 0x1002 > B/net_cls.classid # 10:2 tc qdisc add dev eth0 root \ handle 10: htb tc class add dev eth0 parent 10: \ classid 10:1 htb rate 40mbit tc class add dev eth0 parent 10: \ classid 10:2 htb rate 30mbit tc filter add dev eth0 parent 10: \ protocol ip prio 10 \ handle 1: cgroup Here A and B are containers created with this command. lxc-execute -n A -f configfile /bin/bash lxc-execute -n B -f configfile /bin/bash Whereas configfile contains only this entry: lxc.utsname = test_lxc AFter starting the container , I have started vsftpd inside container A and try to access the files using the ftp client from another machine. Then I killed vsftpd in container A and started vsftpd in container B and try to access the files using ftp client from another machine. I cannot observe any difference in performance, for that matter it is nowhere nearer to 40mbit/30mbit. Please correct me whether anything wrong here.

  Read the article

• Curios: What makes CPUs better than others? [closed]

  - by Zizma

  I have been wondering about this for a long while now and was hoping someone here could answer it pretty easily. If I was looking for the most powerful CPU what should I really be looking at? There are so many different parameters of a CPU and I am wanting to know what each thing does and what really matters. Basically this: What is the deal with cores? If I take using optimized applications out of the mix would it theoretically better to get quad core 1.0GHz CPU or a 1 core 4 GHz CPU? Also, what is the difference between maybe an Sandy Bridge CPU versus an Ivy Bridge CPU? If they both were had the same clock speed and number of cores would the Ivy Bridge perform better? Does an older Xeon with an equal clock speed and number of cores to a new i7 really perform worse/slower? Does size matter? Why would I go with a 22nm CPU over a 32nm when the size difference is so trivial? What about the cache? When does the cache come into play with performance?

  Read the article

• Using ZFS or XFS on a Xen guest running Linux

  - by zoot

  Background: I'm investigating the viability of using a filesystem other than ext3/4, with the ability to run snapshots for backup and rollback purposes. The servers under consideration are mailbox server nodes running on Linode's Xen based VPS platform. I'm particularly drawn to the various published benefits which ZFS offers in terms of data integrity and this year's stable release of native ZFS support in Linux - http://zfsonlinux.org ZFS appears to be the more thorough option in terms of benefits and simplicity (instead of LVM+XFS). Please note that I have little experience with ZFS (which I use on a local FreeNAS installation) and none with XFS, hence the post. To date, my servers are using ext3 filesystems, not managed under LVM. Question in detail: So, I have two questions. (1) Which of the two filesystems would be the better choice for the best of all of the following 3 aspects, running on a Xen Linux guest? Snapshots Data Integrity Performance (2) If ZFS is a viable option, is it practical to use ZRAID across Xen disk images to further enhance the solution for data integrity? Note: I'm reluctant to consider btrfs, given the many warnings I've read about in using it on production systems.

  Read the article

• Web Server Routing Based On Location

  - by Eric

  I have a website that has users from both Hong Kong and Australia. Unfortunately, since the server is located in Australia, users from Hong Kong are going to suffer latency problems. Traffic has to go through US before travelling back to Australia. So I've setup a server in Hong Kong as well, and users using the .hk TLD are going to be redirected to the Hong Kong web server. It shares the same database server with the Australian server but due to aggressive SQL query caching, impact on performance from latency from SQL queries are negligible. But for users accustomed to the Hong Kong website but have since traveled to Australia, they suffer from additional latency because they go to the .hk site which redirects to the HK server even when they're in Australia. The website is targeted at international students from Hong Kong so this is an significant issue for me. Instead of redirecting users to the closest web server based on the TLD, how do I redirect users based on their location? Currently I am using nginx, postgres and Django. Say I know how to estimate users' location based on users' IP addresses, what is my next step? At what level would I work on? What topic should I read up?

  Read the article

• .NET 2.0 "not installed" after upgrade to Windows 7

  - by Greg B

  I Recently upgraded to Windows 7 (Business) RTM from Vista Business and everything is going great, it fixed the BSOD I was getting and the performance of my laptop is improved. However; during the upgrade, something seems to have gone awry with my .NET 2.0 installation. When attempting to install FlashDevelop, I get the following error from the installer package You need to install Maicrtosoft.NET 2.0 runtime before installing FlasgDevelop. You Have . I have a previous release of FD installed from before the upgrade and this still works fine. So I gave up on the new version of FD and got on with my day. Then I tried to install the Microsoft SQL Server Database Publishing Wizard 1.1 and that says I am missing a couple of prerequisites, one of which is .NET 2.0. When I download the .NET 2.0 runtime the installer fails, telling me that This product is already installed as part of the operating system. Does anyone have any idea how to make my computer recognise that .NET 2 is in fact installed. UPDATE I've checked Windows Features and everything relating to .NET is already installed. I've also been through my list of installed programs looking for .NET to in an attempt to uninstall it but it isn't there. In fact, the only thing that looks like a .NET distro that I am able to uninstall is the 3.5 Compact Framework.

  Read the article

• CSV engine on MySQL server

  - by Jeff

  I don't think that this is a programming question so I am going to ask it here - Reading the book high performance mysql, I read about the CSV engine. The paragraph says: The CSV engine can treat comma-separated values (CSV) files as table, but it does not support indexes on them. This engine lets you copy files in and out of the database while the server is running. If you export a CSV file from a spreadsheet and save it in the MySQL server's data directory, the server can read it immediately. Similary, if you write data to a CSV table, an external program can read it right away. CSV tables are especially useful as a data interchange format and for certain kinds of logging. What I get from this paragraph is that I can copy a .CSV file into the data directory of database, and it should show as a table that is able to be read from. However, whenever I copy a test .csv file into the directory, it does not appear as a table. I can't access it. I am using MySQL 5.5 also Does anyone know why this is not working, or what I am doing wrong? Thanks

  Read the article

• Failover strategy for a 4 servers scenario

  - by Joao Villa-Lobos

  Hi all, I am trying to figure out how to set up replication & failover in a scenario with 4 servers (2 per location) where any server may assume the Master role. My initial scenario is the following one: 2 servers in location A (One Master, One Slave); 2 servers in location B (Two Slaves). For this I'm thinking on using the configuration Master-Master Active-Passive suggested on O'Reilly's "High Performance MySQL" on all of them so each one can become a Master when needed. If the Master "dies" the other server from location A assumes the Master role whenever possible. It will always have a bigger priority then the servers on location B. A server on location B will only switch to Master if no server on location A is able to do so. Since MySQL can't handle this automatically I need some other way to implement this. I've read already about heartbeat and Maatkit. Is this the way to go? Has anyone used this in a similar scenario? Is there some other way to go in order to achieve this? Any pointers about failout will be appreciated. I want to keep this as simple as possible avoiding stuff such as DRDB. I'm not concerned about high availability just a way to switch roles automatically without too many hassle. I'm using SuSe Enterprise 10 and MySQL 5.1.30-community. Thanks in advance, João

  Read the article

• What is Best storage servers infrastructure ? DAS/NAS/SAN or installing GlusterFS/LUSTER/HDFS/RBDB

  - by TORr0t

  I am trying to design an infrastucture for the project I am working on. It would be somehow a file-sharing/downloading project (like rapidshare) and I would need high storage sizes and good scability, and I would add new storage nodes after my project grows up. I have come up with 3 solutions for my project which are using Luster, GlusterFS, HDFS, RDBD. For start, i would have 2 servers, one server is for glusterfs client + webserver + db server+ a streaming server, and the other server is gluster storage node. (After sometime, i would be adding more node servers, and client servers (dont know how many new client new servers to add, will see later) So, i am thinking to work with glusterfs. But i really wonder that if i have to use high performance servers with high sotrage sizes or avarage/slow servers with high storage sizes? Or nas/das/san solutions are better for glusterfs storage nodes? I might buy a nas and install glusterfs onto it. I would be happy to listen to your recommendations for the server properties (for each clients and nodes) . I really dont know if I really need high amount of ram and good cpus to for the nodes. I am sure i need it for client servers. The files would be streamed as well, so the Automatic file replication is important, thus, my system should work like a cloud, when needed, according to high traffic, the storage nodes should copy the most demanded file to be streamed and would help me to get rid of scability problems and my visitors would able to stream/download those files. Also, i am open to your experiences/thoughts about any good solution. Luster, hdfs, rbdb are the other options and i would be happy to listen to your thoughts here. I would be very very happy to hear back from anyone commented of any words I have used here. Thanks

  Read the article

• how to properly set environment variables

  - by avorum

  I've recently started using Windows (having used Ubuntu up until now) and I find myself unable to properly set environment variables. Whenever I set them they don't seem to work. I've been going to Start-Edit Environment Variables for your Account and editing the PATH value in the upper half of the GUI. Here's what I've got so far. ;C:\Chocolatey\bin;C:\tools\mysql\current\bin;C:\Program Files (x86)\Git\bin;C:\Program Files\MySQL\MySQL Server 5.6\bin\;C:\Python33\Scripts; These are each the parent directories of the executables I'd like to be able to run by name from CMD, but mysql, git, and pip aren't being recognized. Am I doing something wrong syntactically or at a general understanding level? I'd like to be able to run these commands without having to specify the full path to the executables every time. EDIT: The full PATH extracted from CMD PATH=C:\Python33\;C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common;C:\Program Files (x86)\AMD APP\bin\x86_64;C:\Program Files (x86)\AMD APP\bin\x86;C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files (x86)\Common Files\Microsoft Shared\Windows Live;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\GTK2-Runtime\bin;C:\Program Files\WIDCOMM\Bluetooth Software\;C:\Program Files\WIDCOMM\Bluetooth Software\syswow64;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Microsoft ASP.NET\ASP.NET Web Pages\v1.0\;C:\Program Files\Microsoft SQL Server\110\Tools\Binn\;C:\Program Files (x86)\QuickTime\QTSystem\;C:\Program Files (x86)\Common Files\Acronis\SnapAPI\;C:\Program Files (x86)\Java\jre7\bin;C:\Program Files (x86)\Windows Kits\8.1\Windows Performance Toolkit\;C:\Program Files (x86)\Microsoft SDKs\TypeScript\;C:\Program Files (x86)\MySQL\MySQL Utilities 1.3.4\; ;C:\Chocolatey\bin;C:\tools\mysql\current\bin I'm being forced to use Windows by my work environment, I don't enjoy the state of affairs.

  Read the article

< Previous Page | 439 440 441 442 443 444 445 446 447 448 449 450  | Next Page >