Search Results

Search found 17860 results on 715 pages for 'virtual pc'.

Page 445/715 | < Previous Page | 441 442 443 444 445 446 447 448 449 450 451 452  | Next Page >

• Is there any way to play Netflix (stream) in Windows Media Player 11?

  - by Not So Sharp

  Googling for a solution yields a ridiculous page on eHow that instructs to insert a DVD from Netflix. But I am not interested in the DVD option. I am only interested in streaming and unfortunately none of my browsers (IE, FF, Chrome) uses the hardware acceleration built into my video card. The only way I can play non-choppy video on my PC is via Windows Media Player, but WMP doesn't list Netflix as one of the supported online stores for some reason. Any idea or trick how stream Netflix on WMP 11 instead of a browser?

  Read the article

• Internal USB A Female to motherboard 4-pin that mounts internally

  - by rockinthesixstring

  I'm wondering if anyone knows of a product like this but that is physically mountable internally rather than on a cable? I'm planning on building a super low profile "gateway" pc that is dedicated to handling internet traffic in my home. I have a great 1U rackmountable chassis for an ITX motherboard, but I need the hard drive real estate for the additional NIC required to run a gateway (one onboard and one PCI). So the plan is to use a small 8GB USB Jump Drive for the OS inside the box (as to not have one hanging out the back. And although it's racked, I still don't want the jump drive flopping around internally, so I want it fixed somehow. I have an alternative idea where by I use a flush mount zap strap saddle and a zip tie to hold it in place, but that seems kind of like a hack.

  Read the article

• Unable to call through asterisk

  - by sk

  I want to create a voip service. I have installed asterisk-1.4 on a dedicated remotely hosted debian lenny distro. I made a sip.conf and extensions.conf so as to place a call between two sip phones(i am using xlite 3.0) installed in some other Windows PC. Whenever i switch this phones the asterisk console shows that Registration from '"1000"<sip:[email protected]>' failed for '122.168.10.254' - Peer is not supposed to register Where xx.xx.xx.xx is the server's IP. i.e my sip phones are unable to register with the asterisk server. Please help me to place call between two sip phones #sip show peers Name/username Host Dyn Nat ACL Port Status 2000 (Unspecified) D 0 Unmonitored 1000 (Unspecified) D 0 Unmonitored 2 sip peers [Monitored: 0 online, 0 offline Unmonitored: 0 online, 2 offline] # sip show registry Host Username Refresh State Reg.Time # sip show channels Peer User/ANR Call ID Seq (Tx/Rx) Format Hold Last Message 0 active SIP channels

  Read the article

• Installing/Uninstalling Windows 8 UI Apps in Windows 8 for all users

  - by Donotalo

  I'm using Windows 8 Pro 64 bit quite a while now. My account is the only Administrator account on the PC. There are 2 other standard (and local) accounts. I've noticed that if I install an app from Windows Store, that app is only available from my start screen. Also when I uninstall an app that's common for all users (e.g., Finance), it only uninstalled from my account. I want to install app and want it to be available for all users. When I'll uninstall an app, it should be removed for all users. No other user should have access to it. Just like installing/uninstalling programs on previous versions of Windows. How can I do that?

  Read the article

• How can I repair the boot loader on my laptop?

  - by zbalata

  I had removed my HD from a Dell laptop and accessed it with an external HD port on another computer. Though after returning it to the Dell laptop, it will no longer boot. The PC came pre-installed with Windows 7 and I do not have an installation disk. None of the contents of the original install have been removed or modified. If I use another laptop running Windows 7 to create a repair/recovery disk, would I be able to use it on my Dell to repair the boot sector? How can I repair the bootmgr? It's frustrating knowing there's a perfectly good operating system there that wont boot. Thanks for your time!

  Read the article

• Raid HDD Boot up

  - by user234695

  My server is Power Edge 1950 running server 2008 32Bit, using 3 Physical SAS HDD as a Virtual 2 Disk configured for RAID5, with partition of C drive as OS and D drive as Data. Planning to format and install Server 2008 R2 64Bit so I insert a New Physical disk and configured as RAID5 and clone the C drive and D drive to the new hard disk. Now I need to test that the new hard disk is able to boot windows and work as expected. How do I test, I am not able to boot the windows by choosing the new harddisk, the bios show only the existing HDD, not the new one. Also, if I remove the old three hard disk, and leave the new harddisk and then am I able to boot the device, if I do this does my existing RAID5 configuration and data on the hard disk still remain.

  Read the article

• Making a cracked or activated windows uncracked

  - by ugurcode

  I have a pc which has windows 7 license but I installed windows from an image i downloaded and it is already activated. for validating genuine microsoft, i need to entet my own product key but the necessary activation tools do not exist in my windows folder. What do? I googled stuff but because the keywords are too broad I couldn't find a useful tool DAZ doesn't work, activation button doesn't show up. When I enter my original key to Windows Anytime Upgrade, I get this error When I attempt using slmgr, I get this error I used sfc /scannow Now slmgr is existing, I entered slmgr.vbs -ipk XXXXX-XXXXX-XXXXX-XXXXX-XXXXX (replacing X es with the cd key) the operation successful. Now I have installed Microsoft Security essentials, which means the problem is solved. Main steps are here open cmd enter Enter "sfc /scannow" enter slmgr.vbs -ipk XXXXX-XXXXX-XXXXX-XXXXX-XXXXX Success

  Read the article

• ICS as guest in Ubuntu 12.04 host

  - by oshirowanen

  I have installed Android as per this guide as a guess os via VirtualBox: http://www.android-x86.org/documents/virtualboxhowto Using the following ISO: android-x86-4.0-RC1-eeepc.iso But I am unable to connect to the internet from within the android virtual machine. The host OS is Ubuntu 12.04 where the internet works fine. I have internet access via a usb wireless connection to the home router. All this is fine. If I install Ubuntu 12.04 as a guest, where the host is also Ubuntu 12.04. The guest os'es internet works fine out of the box. But for some reason, I can't get the above androids internet to work out of the box as the guest os. Anyone know what I am doing wrong?

  Read the article

• Apache, Django with mod_wsgi, and large request buffering

  - by Mukul

  In my setup of Apache 2.2 MPM worker and Django 1.3 with mod_wsgi 2.8, I need to support large POST request payloads. The problem is that when there are many such simultaneous requests, Apache uses up all the memory in the system and then crashes. It seems that Apache is buffering the requests completely in memory before executing the WSGI handler and passing it the request. Is there any way to control request buffering in Apache? The log shows the following error whenever the crash happens: [Wed Jun 29 18:35:27 2011] [error] cgid daemon process died, restarting Here's my virtual host's configuration: <VirtualHost *:8080> ServerName example.com ErrorLog /var/log/apache2/error.log WSGIScriptAlias / <path to django.wsgi> WSGIPassAuthorization on WSGIDaemonProcess example.com WSGIProcessGroup example.com XSendFileAllowAbove on XSendFile on </VirtualHost>

  Read the article

• VirtualBox / Ubuntu 10.04 Server

  - by SevenCentral

  I created a virtual machine using VirtualBox 3.2 and Ubuntu Server 10.04 x64. Everything works fine. I logged in. I mounted the VBoxGuestAdditions.iso file. However, I can't for the life of me find where in the operating system this was done so I can get the additions installed. I've tried /media, /cdrom, /mnt, etc... I'm obviously new at this. Can someone help figure out how to install the guest additions and how to locate the mounted file? Thanks.

  Read the article

• Can not change to a static IP in Fedora 19

  - by user196272

  Im having a bit of a weird situation. Ive installed Fedora Linux 19 onto a virtual machine with no GUI. initially eth0 does not show up when I perform ifconfig. when I run dmesg | grep eth I see the adapter but it says it changed names to p2p1. Once I perform the ifconfig p2p1 up command it shows up. Now when I try to edit the /etc/sysconfig/network-scripts/ifcfg-p2p1, it does not exist. the only scripts that are there lo and enp0s3. If I try to create the ifcfg-p2p1 file with the correct settings, I can not restart the network service. I tried editing the enp0s3 file, but that did not work. Im fairly new to linux and not sure what else to put in here, so if you need any more information just let me know and Ill put it in here.

  Read the article

• why would you create two different subnets on the same physical network?

  - by xirtyllo

  I'm working at a messy location, one of the strange (for me) things is that on the same physical network there are two different subnets. Specifically some computers will have 10.0.0.0/24 and some others will have 172.16.0.0/24. There is only one DHCP server, which gives IPs on the 10.0.0.0/24 range, and there are two internet gateways, one with IP 172.16.0.1 and one with IP 10.0.0.1 . To give an example, I can easily swap one PC from one subnet to the other just by changing its IP and gateway settings. I am trying to imagine why they created the network this way, and which may be the possible advantages and/or drawbacks of having two different subnets on the same physical network. Any thoughts?

  Read the article

• How to calculate power/energy taken by computer and screen

  - by r0ca

  I need to investigate how much power my linux machine uses per week. I can take a look at the PSU but I would like to know how to calculate the average use of power it takes. I also need to know how much power a CRT screen use per week. Do I need to check the PSU Watt unit and Screen Watt usage and just add both to have the results? P.S. My english is not good, sorry about that! P.P.S. My question is not related to: http://superuser.com/questions/9946/how-to-choose-a-ups-calculate-power-for-a-new-pc

  Read the article

• Work firewall blocking Gmail IMAP port

  - by Sean

  My work has a very over protective firewall. We use Google Apps for our email and so can access the web interface just fine. I use my laptop at work however (MacBook connected via WiFi through my AirPort Express), and prefer to use Sparrow to check my email. The problem is that our firewall blocks whatever port Gmail's IMAP server uses. I'm trying to figure out the easiest way to work around this. I'm guessing I'll need to use an SSH tunnel or VPN, but I'm looking for specific instructions. I'd prefer to only route the IMAP stuff around the firewall as opposed to using a VPN full time. I have two computers at home (one PC, one Mac Mini) that are always on and could probably act as a server if needed.

  Read the article

• does heartbeat v3 support same resource agent types of pacemaker?

  - by Emre He

  As we know, Pacemaker supports three types of Resource Agents, ? LSB Resource Agents, ? OCF Resource Agents, ? legacy Heartbeat Resource Agents http://www.linux-ha.org/wiki/Resource_Agents does heartbeat v3 support above 3 types resource agent? or it only support LSB and legacy heartbeat resource agents? because we have only virtual ip and one service need to switch in ha cluster, so we decide not involve pacemaker, so we come to this question, for example we cannot monitor the application service by heartbeat, heartbeat only can handle to start it on active node. thanks, Emre

  Read the article

• Simple copy to pen-drive - 0x80070057

  - by yzraeu

  Hello guys, I have this problem for a while and still didn't find the answer. I'm copying a specifc 10mb file to my pen-drive, from any folder on PC to any folder on the pen-drive and all i get is this: 0x80070057 The parameter is incorrect I simply cannot copy the file at all!! The pen-drive in case is my Nokia 5800, in "Mass Storage" mode. Sometimes I cannot copy a single MP3 file, 5 or 7mb. So i have to disconnect and connect again. The source file is not corrupted, the destination works fine with other files. It's just with some files. If I change to another pen-drive, works fine.

  Read the article

• Why is my router assigning the wrong address via DHCP

  - by Barry

  I have a WRT54G router that is set up to serve out addresses via DHCP. It correctly serves up addresses to every other machine on the network, including another PC, my macbook when connected via wireless, my wife's notebook, and our printer. However, whenever I attach my macbook to the router via an ethernet cable, the address it is given via DHCP is wrong. My local network is set up as 192.168.1.*. However, when my macbook connects with an ethernet cable, it is given the IP 192.168.29.*. Currently, I have the macbook set up with a manual IP address, and all seems to be working fine. Any ideas on what could be causing this?

  Read the article

• Music but no voice on headphones

  - by TFD

  I have normal stereo headphones which work fine On a specific PC running Windows 7 the external speaker and USB speakers work fine too But when I plug in the headphones, all I hear is muffled music, no voice track? It sounds like it is being split into 5.1, and I am getting just the L & R components, and not the centre voice channel? In the Playback devices (sound) control panel, I can adjust stereo or 5.1 for external speakers or USB speakers, but not for the headphones. The config button is grey out for them Is this the problem, if so how do I fix it?

  Read the article

• Windows 8 Upgrade : From Windows 7 Trial

  - by Golmaal

  This is a bit complicated it seems. I own Windows Vista Ultimate 64-bit (Retail). It was okay, but around a couple of weeks ago I had some system crash and at that time I decided that I will install Windows 8 as soon as it comes out. However, because of some problems in Vista, at the time of crash, I installed Windows 7 trial. I had some urgent work to do which I accomplished and then I switched the PC off. Now I have purchased Windows 8 Pro Upgrade ($40 version). If I go for a clean install, will it be able to install Windows 8 on not-activated Windows 7? During activation, if it asks for Vista serial number, I can provide it. Or will I first have to install Vista and then only it will allow me to install Windows 8? Also, I used the Upgrade Assistant to download Windows 8 on my laptop (Windows 7 OEM). Will it work on my above mentioned desktop?

  Read the article

• Cisco FC SAN switch decision

  - by Chopper3

  I've got to buy a bunch of FC SAN switches in the next week or so, I have to, and want to, buy Cisco MDSs. Servers are HP BL490c G6's in C7000 chassis with Virtual-Connect Flex-10 ethernet interconnects and VC FC interconnects (Emulex HBAs btw), all running ESX 3.5U4 (for now). I think I've only really got two choices; MDS 9509's with dual-supervisors with a single 48-port 4Gb FC card MDS 9222i's with single supervisor and the built-in 18-FC-port/4-GigE-FCIP-port option Both have the same functionality (I think, buying the enterprise licence btw), both have plenty enough performance and adequate ports for now and the next three years. The 9222i's are about 55% the price of the 9509's - logic says get the 'i's but will I really miss the dual-supervisors? I've got lots of 9509's with dual-supervisors that I'm very happy with but I'm not sure I've every benefitted from the dual-sups in the past and they are nearly twice the price - but if I don't buy them and miss them I can't retrofit them later. What are your thoughts?

  Read the article

• Changing The Text Selection Shortcuts on a Mac

  - by Berk U.

  I've recently switched over from a PC to a Mac and I'm wondering if there is any way to edit the text selection/deletion shortcuts on a Mac. I write a lot of code and I've found these shortcuts to be very helpful. Here is a quick overview of the deletion shortcuts (http://lifehacker.com/5803041/the-mac-os-x-delete-key-it-goes-both-ways); the selection shortcuts on the mac are similar, except that you can use arrow keys instead of delete. I'd be happy to learn of any method, though I would much prefer it if someone can come up with a way to do it using KeyRemap4MacBook.

  Read the article

• HOSTS File Edit in Windows 7 Not Effective - Pinging URL Still Shows Original IP Address

  - by Sootah

  I've edited my HOSTS file on my Windows 7 Ultimate PC to re-route a couple of URLs so that they point to 127.0.0.1, but after saving the file (and re-opening to verify the changes were written) and pinging them they still reply with the actual IP instead of being redirected to 127.0.0.1 as they should be. At least, that's how it worked in XP, Vista, etc. I even went so far as to restart my DNS service on the machine via services.msc; but no dice. So - I would imagine that Windows 7 keeps the HOSTS file there for legacy purposes and doesn't actually use it anymore. Is there a way to make W7 pay attention to the HOSTS file? In the event that you can't do that, where would I go to edit where these URLs point to? Thanks in advance! -Sootah

  Read the article

• Best way to find the computer a user last logged on from?

  - by Garrett

  I am hoping that somewhere in Active Directory the "last logged on from [computer]" is written/stored, or there is a log I can parse out? The purpose of wanting to know the last PC logged on from is for offering remote support over the network - our users move around pretty infrequently, but I'd like to know that whatever I'm consulting was updating that morning (when they logged in, presumably) at minimum. I'm also considering login scripts that write the user and computer names to a known location I can reference, but some of our users don't like to logout for 15 days at a time. If there is an elegant solution that uses login scripts, definitely mention it - but if it happens to work for merely unlocking the station, that would be even better!

  Read the article

• Which is better for running Ubuntu and other Linux OSes, Chromebook or Windows, why? [on hold]

  - by Serge

  I'm learning programming and I would like to switch to a Linux OS, perhaps Ubuntu, to continue this, but the current machine is generally getting pretty old and slow and Windows is the least favorite option for production, and I can manage getting something new right around the price range of the nicest Chromebook on the market right now. However, I have compared specs of HP Chromebook 14 with those of regular PC laptops that roughly cost the same, and the latter consistently have approximately the same and sometimes higher (like the processor speed) specs. Yet usage of Chromebooks for this purpose is pretty widespread nowadays. Is this because they were initially built for a Linux OS - and is it really THAT crucial - or are there other major factors at play here?

  Read the article

• What is the best answer for: "my Internet is not working"?

  - by Maciek Sawicki

  Hi, I look for work in IT Support. One of interview questions is: what would you first say if user call You and tell my Internet is not working? I think about it a lot and still don't know what is correct answerer nor what answer my future employer expects. My choice would be something like: What part of Internet? (but more polite). For example I could ask for opening web page that works on my PC. Please give only serious answers. If You want BOFH or "The website is down" style answers I can create separate question for that.

  Read the article

< Previous Page | 441 442 443 444 445 446 447 448 449 450 451 452  | Next Page >