Search Results

Search found 1493 results on 60 pages for 'cycle'.

Page 45/60 | < Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >

  • Games on windows 8 in bootcamp lag even on lowest graphics

    - by Jackson Gariety
    I've been playing Crysis 2 and Skyrim on my Retina MacBookPro (10,1) for months now. The two games used to run super smoothly even on nearly maxed out settings. This laptop has an Nvidia GeForce GT 650M graphics card inside, it runs great. But I recently replaced my Windows 8 consumer preview with the retail copy, and since then, 3D games lag in this odd way, no matter what the graphics settings. Every second Skyrim and Crysis alternates between running smoothly and lagging. It's a cyclical lag that comes and goes like clockwork. I can turn the graphics down to 800x600 with no antialiasing and low texture quality, and it runs much smoother on the "up" motion of the cycle, but every second it moves back into this lag spike. I've tried installing beta graphics drivers, re installing the operating system, re installing the bootcamp support software, and freeing up space (I have about 20 GB free). I can't figure out what suddenly caused this other than some obscure difference between the consumer preview and the retail version. What can I try? Is my video card failing? Are there some other drivers I can install? This isn't normal lag from maxing out the card, it

    Read the article

  • Linux that restores itself on each reboot

    - by jettero
    I'm looking for methods and software to help create a variant of lubuntu that will restore itself to an install state and/or update on every boot. I'm thinking of doing things like putting the root filesystem on a squashfs and using unionfs and tmpfs to make root writable, but automagically restorable. I'm thinking of updating the squashfs with rsync. Perhaps there are other ways to approach the problem. Perhaps root needn't be writable at all. All thoughts welcome. The home dir would be writable in the usual way. The goal, if it matters, is a Linux that's simple to maintain from the home office, but that functions correctly for customers. We have some custom software that we wish for customers to be able to run trivially on equipment we provide. Ideally these devices would have a "restore to factory" function that would put it back the way we intended. If this is part of the normal boot cycle, so much the better. Why lubuntu? Personal preference for this application. It has a usable desktop, but doesn't take up much ram.

    Read the article

  • zsh : How to list directory content with tab?

    - by Philippe CM
    I just switched from BASH to ZSH and thing are pretty good, but: when I start typing cd /usr/share/s and hit TAB, this is what I get : $ cd /usr/share/sane/ sane/ skype/ ssl-cert/ screen/ smplayer/ strigi/ seed-gtk3/ snmp/ synaptic/ sgml/ software-properties/ system-config-printer/ sgml-base/ soprano/ sysv-rc/ sgml-data/ sounds/ simple-scan/ splashy/ And this is ok. If I then hit TAB again, I get $ cd /usr/share/screen/, the next candidate, witch is also OK. (BTW, how do I cycle back to the previous candidate? Sorry, on to my question) Now what if I want to see the contents of /usr/share/screen/ now ? You now, BASH-style? The cursor is at the end of the line, will I have to ctrl-a (or home), then del del (to erase cd) then ls then ENTER? That seems like a lot of typing. (And it - possibly unnecessarily - enters the command in the history) Would not there be a key (maybe modifier-TAB? but the obvious candidates are already taken by the desktop... I digress) that would tell zsh to stop cycling through /usr/share/ and instead, just list the content /usr/share/screen/ ?

    Read the article

  • Nvidia 9800GT randomly prevents computer from booting

    - by Blender
    My computer has been running Windows and Linux perfectly fine with my 9800GT for the past year or so, but today it refused to boot. When I press the power button, this is what happens: Power button flashes once. Fans whir. Graphics card makes clicking noise. Computer reboots. Go back to 1. The cycle just keeps going, and I have to yank the cord to make the computer stop. After about 30 attempts at booting it, the computer powers on and everything works. I'm pretty sure that the graphics card isn't malfunctioning, as I've been GPU computing on it for a while now without any hiccups. But the strange thing is, the computer boots perfectly fine in only 5 boots if I remove the card. The computer is a HP Pavilion a6028x Desktop PC: Processor: AMD Athlon 64 X2 (W) 4600+ 2.4 GHz (AM2 socket) Motherboard: ECS MCP61PM-HM (Nettle 1) RAM: 3GB DDR2 (two different brands) More specs here Does anybody know what could be the problem? Any help or information would be greatly appreciated!

    Read the article

  • Non-volatile cache RAID controllers: what kind of protection is there against NVCACHE failure?

    - by astrostl
    The battery back-up (BBU) model: admin enables write-back cache with BBU writes are cached to the RAID controller's RAM (major performance benefit) the battery saves uncommitted and cached data in the event of a power loss (reliability) If I lose power and come back within a day or so, my data should be both complete and uncorrupted. The downside to this is that, if the battery is dead or low, OR EVEN IF IT IS IN A RELEARN CYCLE (drain/charge loops to ensure the battery's health), the controller reverts to write-through mode and performance will suffer. What's more, the relearn cycles are usually automated on a schedule which may or may not happen in the middle of big traffic. So, that has to be manually disabled and manually scheduled for off-hours if it's a concern. Annoying either way. NV caches have capacitors with a sufficient charge to commit any uncommitted-to-disk data to flash. Not only is that more survivable in longer loss situations, but you don't have to concern yourself with battery death, wear-out, or relearning. All of that sounds great to me. What doesn't sound great to me is the prospect of that flash module having an issue, though. What if it's completely hosed? What if it's only partially hosed? A bit corrupted at the edges? Relearn cycles can tell when something like a simple battery is failing, but is there a similar process to verify that the flash is functional? I'm just far more trusting of a battery, warts and all. I know the card's RAM can fail, the card itself can fail - that's common territory, though. In case you didn't guess, yeah, I've experienced a shocking-to-me amount of flash/SSD/etc. failure :)

    Read the article

  • very diferent results from df after few seconds

    - by tatus2
    When the backup moves the files from one to the other server the results from df changing every some seconds in impossible manner. On source host is running rsync. On destination host I'm running every few seconds following command: echo `date` `df|grep md0` Results are below: Sat Jun 29 23:57:12 CEST 2013 /dev/md0 4326425568 579316100 3527339636 15% /MD0 Sat Jun 29 23:57:14 CEST 2013 /dev/md0 4326425568 852513700 3254142036 21% /MD0 Sat Jun 29 23:57:15 CEST 2013 /dev/md0 4326425568 969970340 3136685396 24% /MD0 Sat Jun 29 23:57:17 CEST 2013 /dev/md0 4326425568 1255222180 2851433556 31% /MD0 Sat Jun 29 23:57:20 CEST 2013 /dev/md0 4326425568 1276006720 2830649016 32% /MD0 Sat Jun 29 23:57:24 CEST 2013 /dev/md0 4326425568 1355440016 2751215720 34% /MD0 Sat Jun 29 23:57:26 CEST 2013 /dev/md0 4326425568 1425090960 2681564776 35% /MD0 Sat Jun 29 23:57:27 CEST 2013 /dev/md0 4326425568 1474601872 2632053864 36% /MD0 Sat Jun 29 23:57:28 CEST 2013 /dev/md0 4326425568 1493627384 2613028352 37% /MD0 Sat Jun 29 23:57:32 CEST 2013 /dev/md0 4326425568 615934400 3490721336 15% /MD0 Sat Jun 29 23:57:33 CEST 2013 /dev/md0 4326425568 636071360 3470584376 16% /MD0 as you can see I start from USE of 15% and after 15 seconds I'm at 37% (I don't need to mention that the backup can not copy this huge amount of data in so short time). After ~20 sec the cycle closes. I'm again roughly by the same usage as earlier. The value is reasonable ca. 35 Mb were copied. Can somebody explain me what is going on? Does df only make an estimation of usage instead of used value?

    Read the article

  • Very diferent results from df after a few seconds

    - by tatus2
    When the backup moves the files from one server to the other the results from df change every few seconds in an impossible manner. The source host is running rsync. On the destination host I'm running the following command every few seconds: echo `date` `df|grep md0` Results are below: Sat Jun 29 23:57:12 CEST 2013 /dev/md0 4326425568 579316100 3527339636 15% /MD0 Sat Jun 29 23:57:14 CEST 2013 /dev/md0 4326425568 852513700 3254142036 21% /MD0 Sat Jun 29 23:57:15 CEST 2013 /dev/md0 4326425568 969970340 3136685396 24% /MD0 Sat Jun 29 23:57:17 CEST 2013 /dev/md0 4326425568 1255222180 2851433556 31% /MD0 Sat Jun 29 23:57:20 CEST 2013 /dev/md0 4326425568 1276006720 2830649016 32% /MD0 Sat Jun 29 23:57:24 CEST 2013 /dev/md0 4326425568 1355440016 2751215720 34% /MD0 Sat Jun 29 23:57:26 CEST 2013 /dev/md0 4326425568 1425090960 2681564776 35% /MD0 Sat Jun 29 23:57:27 CEST 2013 /dev/md0 4326425568 1474601872 2632053864 36% /MD0 Sat Jun 29 23:57:28 CEST 2013 /dev/md0 4326425568 1493627384 2613028352 37% /MD0 Sat Jun 29 23:57:32 CEST 2013 /dev/md0 4326425568 615934400 3490721336 15% /MD0 Sat Jun 29 23:57:33 CEST 2013 /dev/md0 4326425568 636071360 3470584376 16% /MD0 As you can see I start from USE of 15% and after 15 seconds I'm at 37% (I don't need to mention that the backup can not copy this huge amount of data in such a short time). After ~20 seconds the cycle closes. I'm again roughly at the same usage as earlier. The value is reasonable, ca. 35 Mb were copied. Can somebody explain to me what is going on? Does df only make an estimation of usage instead of used value?

    Read the article

  • 26 Days: Countdown to Oracle OpenWorld 2012

    - by Michael Snow
    Welcome to our countdown to Oracle OpenWorld! Oracle OpenWorld 2012 is just around the corner. In less than 26 days, San Francisco will be invaded by an expected 50,000 people from all over the world. Here on the Oracle WebCenter team, we’ve all been working to help make the experience a great one for all our WebCenter customers. For a sneak peak  – we’ll be spending this week giving you a teaser of what to look forward to if you are joining us in San Francisco from September 30th through October 4th. We have Oracle WebCenter sessions covering all topics imaginable. Take a look and use the tools we provide to build out your schedule in advance and reserve your seats in your favorite sessions.  That gives you plenty of time to plan for your week with us in San Francisco. If unfortunately, your boss denied your request to attend - there are still some ways that you can join in the experience virtually On-Demand. This year - we are expanding even more up North of Market Street and will be taking over Union Square as well. Check out this map of San Francisco to get a sense of how much of a footprint Oracle OpenWorld has grown to this year. With so much to see and so many sessions to learn from - its no wonder that people get excited. Add to that a good mix of fun and all of the possible WebCenter sessions you could attend - you won't want to sleep at all to take full advantage of such an opportunity. We'll also have our annual WebCenter Customer Appreciation reception - stay tuned this week for some more info on registration to make sure you'll be able to join us. If you've been following the America's Cup at all and believe in EXTREME PERFORMANCE you'll definitely want to take a look at this video from last year's OpenWorld Keynote. 12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Important OpenWorld Links:  Attendee / Presenters Toolkit Oracle Schedule Builder WebCenter Sessions (listed in the catalog under Fusion Middleware as "Portals, Sites, Content, and Collaboration" ) Oracle Music Festival - AMAZING Line up!!  Oracle Customer Appreciation Night -LOOK HERE!! Oracle OpenWorld LIVE On-Demand Here are all the WebCenter sessions broken down by day for your viewing pleasure. Monday, October 1st CON8885 - Simplify CRM Engagement with Contextual Collaboration Are your sales teams disconnected and disengaged? Do you want a tool for easily connecting expertise across your organization and providing visibility into the complete sales process? Do you want a way to enhance and retain organization knowledge? Oracle Social Network is the answer. Attend this session to learn how to make CRM easy, effective, and efficient for use across virtual sales teams. Also learn how Oracle Social Network can drive sales force collaboration with natural conversations throughout the sales cycle, promote sales team productivity through purposeful social networking without the noise, and build cross-team knowledge by integrating conversations with CRM and other business applications. CON8268 - Oracle WebCenter Strategy: Engaging Your Customers. Empowering Your Business Oracle WebCenter is a user engagement platform for social business, connecting people and information. Attend this session to learn about the Oracle WebCenter strategy, and understand where Oracle is taking the platform to help companies engage customers, empower employees, and enable partners. Business success starts with ensuring that everyone is engaged with the right people and the right information and can access what they need through the channel of their choice—Web, mobile, or social. Are you giving customers, employees, and partners the best-possible experience? Come learn how you can! ¶ HOL10208 - Add Social Capabilities to Your Enterprise Applications Oracle Social Network enables you to add real-time collaboration capabilities into your enterprise applications, so that conversations can happen directly within your business systems. In this hands-on lab, you will try out the Oracle Social Network product to collaborate with other attendees, using real-time conversations with document sharing capabilities. Next you will embed social capabilities into a sample Web-based enterprise application, using embedded UI components. Experts will also write simple REST-based integrations, using the Oracle Social Network API to programmatically create social interactions. ¶ CON8893 - Improve Employee Productivity with Intuitive and Social Work Environments Social technologies have already transformed the ways customers, employees, partners, and suppliers communicate and stay informed. Forward-thinking organizations today need technologies and infrastructures to help them advance to the next level and integrate social activities with business applications to deliver a user experience that simplifies business processes and enterprise application engagement. Attend this session to hear from an innovative Oracle Social Network customer and learn how you can improve productivity with intuitive and social work environments and empower your employees with innovative social tools to enable contextual access to content and dynamic personalization of solutions. ¶ CON8270 - Oracle WebCenter Content Strategy and Vision Oracle WebCenter provides a strategic content infrastructure for managing documents, images, e-mails, and rich media files. With a single repository, organizations can address any content use case, such as accounts payable, HR onboarding, document management, compliance, records management, digital asset management, or Website management. In this session, learn about future plans for how Oracle WebCenter will address new use cases as well as new integrations with Oracle Fusion Middleware and Oracle Applications, leveraging your investments by making your users more productive and error-free. ¶ CON8269 - Oracle WebCenter Sites Strategy and Vision Oracle’s Web experience management solution, Oracle WebCenter Sites, enables organizations to use the online channel to drive customer acquisition and brand loyalty. It helps marketers and business users easily create and manage contextually relevant, social, interactive online experiences across multiple channels on a global scale. In this session, learn about future plans for how Oracle WebCenter Sites will provide you with the tools, capabilities, and integrations you need in order to continue to address your customers’ evolving requirements for engaging online experiences and keep moving your business forward. ¶ CON8896 - Living with SharePoint SharePoint is a popular platform, but it’s not always the best fit for Oracle customers. In this session, you’ll discover the technical and nontechnical limitations and pitfalls of SharePoint and learn about Oracle alternatives for collaboration, portals, enterprise and Web content management, social computing, and application integration. The presentation shows you how to integrate with SharePoint when business or IT requirements dictate and covers cloud-based (Office 365) and on-premises versions of SharePoint. Presented by a former Microsoft director of SharePoint product management and backed by independent customer research, this session will prepare you to answer the question “Why don’t we just use SharePoint for that?’ the next time it comes up in your organization. ¶ CON7843 - Content-Enabling Enterprise Processes with Oracle WebCenter Organizations today continually strive to automate business processes, reduce costs, and improve efficiency. Many business processes are content-intensive and unstructured, requiring ad hoc collaboration, and distributed in nature, requiring many approvals and generating huge volumes of paper. In this session, learn how Oracle and SYSTIME have partnered to help a customer content-enable its enterprise with Oracle WebCenter Content and Oracle WebCenter Imaging 11g and integrate them with Oracle Applications. ¶ CON6114 - Tape Robotics’ Newest Superhero: Now Fueled by Oracle Software For small, midsize, and rapidly growing businesses that want the most energy-efficient, scalable storage infrastructure to meet their rapidly growing data demands, Oracle’s most recent addition to its award-winning tape portfolio leverages several pieces of Oracle software. With Oracle Linux, Oracle WebLogic, and Oracle Fusion Middleware tools, the library achieves a higher level of usability than previous products while offering customers a familiar interface for management, plus ease of use. This session examines the competitive advantages of the tape library and how Oracle software raises customer satisfaction. Learn how the combination of Oracle engineered systems, Oracle Secure Backup, and Oracle’s StorageTek tape libraries provide end-to-end coverage of your data. ¶ CON9437 - Mobile Access Management With more than five billion mobile devices on the planet and an increasing number of users using their own devices to access corporate data and applications, securely extending identity management to mobile devices has become a hot topic. This session focuses on how to extend your existing identity management infrastructure and policies to securely and seamlessly enable mobile user access. CON7815 - Customer Experience Online in Cloud: Oracle WebCenter Sites, Oracle ATG Apps, Oracle Exalogic Oracle WebCenter Sites and Oracle’s ATG product line together can provide a compelling marketing and e-commerce experience. When you couple them with the extreme performance of Oracle Exalogic, you’ll see unmatched scalability that provides you with a true cloud-based solution. In this session, you’ll learn how running Oracle WebCenter Sites and ATG applications on Oracle Exalogic delivers both a private and a public cloud experience. Find out what it takes to get these systems working together and delivering engaging Web experiences. Even if you aren’t considering Oracle Exalogic today, the rich Web experience of Oracle WebCenter, paired with the depth of the ATG product line, can provide your business full support, from merchandising through sale completion. ¶ CON8271 - Oracle WebCenter Portal Strategy and Vision To innovate and keep a competitive edge, organizations need to leverage the power of agile and responsive Web applications. Oracle WebCenter Portal enables you to do just that, by delivering intuitive user experiences for enterprise applications to drive innovation with composite applications and mashups. Attend this session to learn firsthand from customers how Oracle WebCenter Portal extends the value of existing enterprise applications, business processes, and content; delivers a superior business user experience; and maximizes limited IT resources. ¶ CON8880 - The Connected Customer Experience Begins with the Online Channel There’s a lot of talk these days about how to connect the customer journey across various touchpoints—from Websites and e-commerce to call centers and in-store—to provide experiences that are more relevant and engaging and ultimately gain competitive edge. Doing it all at once isn’t a realistic objective, so where do you start? Come to this session, and hear about three steps you can take that can help you begin your journey toward delivering the connected customer experience. You’ll hear how Oracle now has an integrated digital marketing platform for your corporate Website, your e-commerce site, your self-service portal, and your marketing and loyalty campaigns, and you’ll learn what you can do today to begin executing on your customer experience initiatives. ¶ GEN11451 - General Session: Building Mobile Applications with Oracle Cloud With the prevalence of smart mobile devices, companies are facing an increased demand to provide access to data and applications from new channels. However, developing applications for mobile devices poses some unique challenges. Come to this session to learn how Oracle addresses these challenges, offering a simpler way to develop and deploy cross-device mobile applications. See how Oracle Cloud enables you to access applications, data, and services from mobile channels in an easier way.  CON8272 - Oracle Social Network Strategy and Vision One key way of increasing employee productivity is by bringing people, processes, and information together—providing new social capabilities to enable business users to quickly correspond and collaborate on business activities. Oracle WebCenter provides a user engagement platform with social and collaborative technologies to empower business users to focus on their key business processes, applications, and content in the context of their role and process. Attend this session to hear how the latest social capabilities in Oracle Social Network are enabling organizations to transform themselves into social businesses.  --- Tuesday, October 2nd HOL10194 - Enterprise Content Management Simplified: Oracle WebCenter Content’s Next-Generation UI Regardless of the nature of your business, unstructured content underpins many of its daily functions. Whether you are working with traditional presentations, spreadsheets, or text documents—or even with digital assets such as images and multimedia files—your content needs to be accessible and manageable in convenient and intuitive ways to make working with the content easier. Additionally, you need the ability to easily share documents with coworkers to facilitate a collaborative working environment. Come to this session to see how Oracle WebCenter Content’s next-generation user interface helps modern knowledge workers easily manage personal and enterprise documents in a collaborative environment.¶ CON8877 - Develop a Mobile Strategy with Oracle WebCenter: Engage Customers, Employees, and Partners Mobile technology has gone from nice-to-have to a cornerstone of user engagement. Mobile access enables users to have information available at their fingertips, enabling them to take action the moment they make a decision, interact in the moment of convenience, and take advantage of new service offerings in their preferred channels. All your employees have your mobile applications in their pocket; now what are you going to do? It is a critical step for companies to think through what their employees, customers, and partners really need on their devices. Attend this session to see how Oracle WebCenter enables you to better engage your customers, employees, and partners by providing a unified experience across multiple channels. ¶ CON9447 - Enabling Access for Hundreds of Millions of Users How do you grow your business by identifying, authenticating, authorizing, and federating users on the Web, leveraging social identity and the open source OAuth protocol? How do you scale your access management solution to support hundreds of millions of users? With social identity support out of the box, Oracle’s access management solution is also benchmarked for 250-million-user deployment according to real-world customer scenarios. In this session, you will learn about the social identity capability and the 250-million-user benchmark testing of Oracle Access Manager and Oracle Adaptive Access Manager running on Oracle Exalogic and Oracle Exadata. ¶ HOL10207 - Build an Intranet Portal with Oracle WebCenter In this hands-on lab, you’ll work with Oracle WebCenter Portal and Oracle WebCenter Content to build out an enterprise portal that maximizes the productivity of teams and individual contributors. Using browser-based tools, you’ll manage site resources such as page styles, templates, and navigation. You’ll edit content stored in Oracle WebCenter Content directly from your portal. You’ll also experience the latest features that promote collaboration, social networking, and personal productivity. ¶ CON2906 - Get Proactive: Best Practices for Maintaining Oracle Fusion Middleware You chose Oracle Fusion Middleware products to help your organization deliver superior business results. Now learn how to take full advantage of your software with all the great tools, resources, and product updates you’re entitled to through Oracle Support. In this session, Oracle product experts provide proven best practices to help you work more efficiently, plan and prepare for upgrades and patching more effectively, and manage risk. Topics include configuration management tools, remote diagnostics, My Oracle Support Community, and My Oracle Support Lifecycle Advisors. New users and Oracle Fusion Middleware experts alike are guaranteed to leave with fresh ideas and practical, easy-to-implement next steps. ¶ CON8878 - Oracle WebCenter’s Cloud Strategy: From Social and Platform Services to Mashups Cloud computing represents a paradigm shift in how we build applications, automate processes, collaborate, and share and in how we secure our enterprise. Additionally, as you adopt cloud-based services in your organization, it’s likely that you will still have many critical on-premises applications running. With these mixed environments, multiple user interfaces, different security, and multiple datasources and content sources, how do you start evolving your strategy to account for these challenges? Oracle WebCenter offers a complete array of technologies enabling you to solve these challenges and prepare you for the cloud. Attend this session to learn how you can use Oracle WebCenter in the cloud as well as create on-premises and cloud application mash-ups. ¶ CON8901 - Optimize Enterprise Business Processes with Oracle WebCenter and Oracle BPM Do you have business processes that span multiple applications? Are you grappling with how to have visibility across these business processes; how to manage content that is associated with these processes; and, most importantly, how to model and optimize these business processes? Attend this session to hear how Oracle WebCenter and Oracle Business Process Management provide a unique set of integrated solutions to provide a composite application dashboard across these business processes and offer a solution for content-centric business processes. ¶ CON8883 - Deliver Engaging Interfaces to Oracle Applications with Oracle WebCenter Critical business processes live within enterprise applications, and application users need to manage and execute these processes as effectively as possible. Oracle provides a comprehensive user engagement platform to increase user productivity and optimize overall processes within Oracle Applications—Oracle E-Business Suite and Oracle’s Siebel, PeopleSoft, and JD Edwards product families—and third-party applications. Attend this session to learn how you can integrate these applications with Oracle WebCenter to deliver composite application dashboards to your end users—whether they are your customers, partners, or employees—for enhanced usability and Web 2.0–enabled enterprise portals.¶ Wednesday, October 3rd CON8895 - Future-Ready Intranets: How Aramark Re-engineered the Application Landscape There are essential techniques and technologies you can use to deliver employee portals that garner higher productivity, improve business efficiency, and increase user engagement. Attend this session to learn how you can leverage Oracle WebCenter Portal as a user engagement platform for bringing together business process management, enterprise content management, and business intelligence into a highly relevant and integrated experience. Hear how Aramark has leveraged Oracle WebCenter Portal and Oracle WebCenter Content to deliver a unified workspace providing simpler navigation and processing, consolidation of tools, easy access to information, integrated search, and single sign-on. ¶ CON8886 - Content Consolidation: Save Money, Increase Efficiency, and Eliminate Silos Organizations are looking for ways to save money and be more efficient. With content in many different places, it’s difficult to know where to look for a document and whether the document is the most current version. With Oracle WebCenter, content can be consolidated into one best-of-breed repository that is secure, scalable, and integrated with your business processes and applications. Users can find the content they need, where they need it, and ensure that it is the right content. This session covers content challenges that affect your business; content consolidation that can lead to savings in storage and administration costs and can lower risks; and how companies are realizing savings. ¶ CON8911 - Improve Online Experiences for Customers and Partners with Self-Service Portals Are you able to provide your customers and partners an easy-to-use online self-service experience? Are you processing high-volume transactions and struggling with call center bottlenecks or back-end systems that won’t integrate, causing order delays and customer frustration? Are you looking to target content such as product and service offerings to your end users? This session shares approaches to providing targeted delivery as well as strategies and best practices for transforming your business by providing an intuitive user experience for your customers and partners. ¶ CON6156 - Top 10 Ways to Integrate Oracle WebCenter Content This session covers 10 common ways to integrate Oracle WebCenter Content with other enterprise applications and middleware. It discusses out-of-the-box modules that provide expanded features in Oracle WebCenter Content—such as enterprise search, SOA, and BPEL—as well as developer tools you can use to create custom integrations. The presentation also gives guidance on which integration option may work best in your environment. ¶ HOL10207 - Build an Intranet Portal with Oracle WebCenter In this hands-on lab, you’ll work with Oracle WebCenter Portal and Oracle WebCenter Content to build out an enterprise portal that maximizes the productivity of teams and individual contributors. Using browser-based tools, you’ll manage site resources such as page styles, templates, and navigation. You’ll edit content stored in Oracle WebCenter Content directly from your portal. You’ll also experience the latest features that promote collaboration, social networking, and personal productivity. ¶ CON7817 - Migration to Oracle WebCenter Imaging 11g Customers today continually strive to automate business processes, reduce costs, and improve efficiency. The accounts payable process—which is often distributed in nature, requires many approvals, and generates huge volumes of paper invoices—is automated by many customers. In this session, learn how Oracle and SYSTIME have partnered to help a customer migrate its existing Oracle Imaging and Process Management Release 7.6 to the latest Oracle WebCenter Imaging 11g and integrate it with Oracle’s JD Edwards family of products. ¶ CON8910 - How to Engage Customers Across Web, Mobile, and Social Channels Whether on desktops at the office, on tablets at home, or on mobile phones when on the go, today’s customers are always connected. To engage today’s customers, you need to make the online customer experience connected and consistent across a host of devices and multiple channels, including Web, mobile, and social networks. Managing this multichannel environment can result in lots of headaches without the right tools. Attend this session to learn how Oracle WebCenter Sites solves the challenge of multichannel customer engagement. ¶ HOL10206 - Oracle WebCenter Sites 11g: Transforming the Content Contributor Experience Oracle WebCenter Sites 11g makes it easy for marketers and business users to contribute to and manage Websites with the new visual, contextual, and intuitive Web authoring interface. In this hands-on lab, you will create and manage content for a sports-themed Website, using many of the new and enhanced features of the 11g release. ¶ CON8900 - Building Next-Generation Portals: An Interactive Customer Panel Discussion Social and collaborative technologies have changed how people interact, learn, and collaborate, and providing a modern, social Web presence is imperative to remain competitive in today’s market. Can your business benefit from a more collaborative and interactive portal environment for employees, customers, and partners? Attend this session to hear from Oracle WebCenter Portal customers as they share their strategies and best practices for providing users with a modern experience that adapts to their needs and includes personalized access to content in context. The panel also addresses how customers have benefited from creating next-generation portals by migrating from older portal technologies to Oracle WebCenter Portal. ¶ CON9625 - Taking Control of Oracle WebCenter Security Organizations are increasingly looking to extend their Oracle WebCenter portal for social business, to serve external users and provide seamless access to the right information. In particular, many organizations are extending Oracle WebCenter in a business-to-business scenario requiring secure identification and authorization of business partners and their users. This session focuses on how customers are leveraging, securing, and providing access control to Oracle WebCenter portal and mobile solutions. You will learn best practices and hear real-world examples of how to provide flexible and granular access control for Oracle WebCenter deployments, using Oracle Platform Security Services and Oracle Access Management Suite product offerings. ¶ CON8891 - Extending Social into Enterprise Applications and Business Processes Oracle Social Network is an extensible social platform that enables contextual collaboration within enterprise applications and business processes, providing relevant data from across various enterprise systems in one place. Attend this session to see how an Oracle Social Network customer is integrating multiple applications—such as CRM, HCM, and business processes—into Oracle Social Network and Oracle WebCenter to enable individuals and teams to solve complex cross-organizational business problems more effectively by utilizing the social enterprise. ¶ Thursday, October 4th CON8899 - Becoming a Social Business: Stories from the Front Lines of Change What does it really mean to be a social business? How can you change our organization to embrace social approaches? What pitfalls do you need to avoid? In this lively panel discussion, customer and industry thought leaders in social business explore these topics and more as they share their stories of the good, the bad, and the ugly that can happen when embracing social methods and technologies to improve business success. Using moderated questions and open Q&A from the audience, the panel discusses vital topics such as the critical factors for success, the major issues to avoid, how to gain senior executive support for social efforts, how to handle undesired behavior, and how to measure business impact. It takes a thought-provoking look at becoming a social business from the inside. ¶ CON6851 - Oracle WebCenter and Oracle Business Intelligence Enterprise Edition to Create Vendor Portals Large manufacturers of grocery items routinely find themselves depending on the inventory management expertise of their wholesalers and distributors. Inventory costs can be managed more efficiently by the manufacturers if they have better insight into the inventory levels of items carried by their distributors. This creates a unique opportunity for distributors and wholesalers to leverage this knowledge into a revenue-generating subscription service. Oracle Business Intelligence Enterprise Edition and Oracle WebCenter Portal play a key part in enabling creation of business-managed business intelligence portals for vendors. This session discusses one customer that implemented this by leveraging Oracle WebCenter and Oracle Business Intelligence Enterprise Edition. ¶ CON8879 - Provide a Personalized and Consistent Customer Experience in Your Websites and Portals Your customers engage with your company online in different ways throughout their journey—from prospecting by acquiring information on your corporate Website to transacting through self-service applications on your customer portal—and then the cycle begins again when they look for new products and services. Ensuring that the customer experience is consistent and personalized across online properties—from branding and content to interactions and transactions—can be a daunting task. Oracle WebCenter enables you to speak and interact with your customers with one voice across your Websites and portals by providing an integrated platform for delivery of self-service and engagement that unifies and personalizes the online experience. Learn more in this session. ¶ CON8898 - Land Mines, Potholes, and Dirt Roads: Navigating the Way to ECM Nirvana Ten years ago, people were predicting that by this time in history, we’d be some kind of utopian paperless society. As we all know, we’re not there yet, but are we getting closer? What is keeping companies from driving down the road to enterprise content management bliss? Most people understand that using ECM as a central platform enables organizations to expedite document-centric processes, but most business processes in organizations are still heavily paper-based. Many of these processes could be automated and improved with an ECM platform infrastructure. In this panel discussion, you’ll hear from Oracle WebCenter customers that have already solved some of these challenges as they share their strategies for success and roads to avoid along your journey. ¶ CON8908 - Oracle WebCenter Portal: Creating and Using Content Presenter Templates Oracle WebCenter Portal applications use task flows to display and integrate content stored in the Oracle WebCenter Content server. Among the most flexible task flows is Content Presenter, which renders various types of content on an Oracle WebCenter Portal page. Although Oracle WebCenter Portal comes with a set of predefined Content Presenter templates, developers can create their own templates for specific rendering needs. This session shows the lifecycle of developing Content Presenter task flows, including how to create, package, import, modify at runtime, and use such templates. In addition to simple examples with Oracle Application Development Framework (Oracle ADF) UI elements to render the content, it shows how to use other UI technologies, CSS files, and JavaScript libraries. ¶ CON8897 - Using Web Experience Management to Drive Online Marketing Success Every year, the online channel becomes more imperative for driving organizational top-line revenue, but for many companies, mastering how to best market their products and services in a fast-evolving online world with high customer expectations for personalized experiences can be a complex proposition. Come to this panel discussion, and hear directly from online marketers how they are succeeding today by using Web experience management to drive marketing success, using capabilities such as targeting and optimization, user-generated content, mobile site publishing, and site visitor personalization to deliver engaging online experiences. ¶ CON8892 - Oracle’s Journey to Social Business Social business is a revolution, one that is causing rapidly accelerating change in how companies and customers engage with one another and how employees work together. Oracle’s goal in becoming a social business is to create a socially connected organization in which working collaboratively across geographical locations, lines of business, and management chains is second nature, enabling innovative solutions to business challenges. We can achieve this by connecting the right people, finding the right content, communicating with the right people, collaborating at the right time, and building the right communities in the right context—all ready in the CLOUD. Attend this session to see how Oracle is transforming itself into a social business. ¶  ------------ If you've read all the way to the end here - we are REALLY looking forward to seeing you in San Francisco.

    Read the article

  • Announcing the new Oracle Retail Workspace, A Configuration of Oracle WebCenter Spaces 11.1.1.5 for Oracle Retail

    - by Oracle Retail Documentation Team
    For the Oracle Retail 13.2.x enterprise, Oracle Retail Workspace 13.2.4 replaces previous versions of Oracle Retail Workspace. Oracle Retail Workspace 13.2.4 is a supported configuration of Oracle WebCenter Spaces 11.1.1.5 for Oracle Retail. Supported Product Overview In order to provide a next-generation Oracle user engagement platform for the retail industry, Oracle Retail Workspace leverages WebCenter Spaces. Oracle Retail Workspace is not a licensed retail application with any code. Instead, retailers purchase the underlying technology and then leverage the Oracle Retail Workspace Implementation Guide to configure a portal utilizing Oracle WebCenter Spaces. Oracle Retail Workspace has been repositioned as a configuration of Oracle WebCenter Spaces for the following reasons: The Oracle Retail Workspace configuration utilizes the external application functionality and the application navigator taskflow of the Oracle WebCenter Framework to configure Oracle Retail applications in Oracle WebCenter Spaces. The Oracle WebCenter Framework improves IT development cycle times by blending Web 2.0 services, processes, business intelligence, and transactions in an integrated JSF framework. The Oracle WebCenter Spaces 11g offers features provided by the previous versions of Oracle Retail Workspace that enable retailers to leverage a productive portal-based environment. List of Documents The following are included in Workspace 13.2.4, A Configuration of WebCenter Spaces 11.1.1.5 for Oracle Retail Oracle Retail Workspace Release Notes Oracle Retail Workspace Implementation Guide Workspace Retail Library—Unsupported The Oracle Retail Workspace Retail Library is comprised of previously-published accelerator documents and sample code downloads hosted on My Oracle Support. They are not supported, nor are they associated with the support lifecycle of the Workspace application. Doc ID: 1461281.1: Oracle Retail Workspace Retail Library Oracle Retail Workspace Retail Library Reference GuideA set of Micro-Applications that can be used to perform some of the operations of Oracle Retail Merchandising System (RMS) from outside the application. This document describes the functional and technical design details of the Micro-Applications available in this release, including the following and more: Create Regular Item Create Purchase Order Item Transfer Update Vendor Oracle Retail Fashion Planning Bundle Reports documentationThe Oracle Retail Fashion Planning Bundle Reports package includes role-based Oracle Business Intelligence (BI) Enterprise Edition (EE) reports and dashboards that provide an illustrative overview highlighting the Fashion Planning Bundle solutions. These dashboards can be leveraged out-of-the-box or can be used along with the other dashboards and reports that may have already been created to support a specific solution or organizational needs. This package includes dashboards for the Assortment Planning, Item Planning, Item Planning Configured for COE, Merchandise Financial Planning Retail Accounting, and Merchandise Financial Planning Cost Accounting applications. Oracle Retail Accelerators for WebLogic Server 11g Micro-Applications Development TutorialThis tutorial describes how you can create a Micro-Application for the Create a Regular Item task in the Retail Merchandising System (RMS) application using Oracle JDeveloper and ADF. Retail Accelerators: Developing ADF Reports for RPASThis document illustrates how you can use the Oracle Application Development Framework 11g (ADF) to generate reports that provide insights from the Oracle Retail Predictive Application Server (RPAS) based applications. Oracle Retail Accelerators Guide for WebCenter 11gOracle Retail Accelerators Guide for WebCenter 11g describes how you can integrate Oracle Retail applications with Oracle WebCenter Spaces and customize WebCenter Spaces to include custom-developed content. Oracle Retail Accelerators, Developing Oracle BI EE reports on RPAS Domain DataThis document illustrates how you can set up the integration between BI EE and RPAS domains to generate BI EE reports and dashboards for RPAS. Oracle Retail Accelerators, Developing Oracle BI EE Reports on RPAS WorkbooksThis document outlines a process to create real-time Oracle Business Intelligence (BI) Enterprise Edition reports against RPAS workbooks dynamically, as opposed to directly going against the RPAS domain for the data. 

    Read the article

  • How To Clear An Alert - Part 2

    - by werner.de.gruyter
    There were some interesting comments and remarks on the original posting, so I decided to do a follow-up and address some of the issues that got raised... Handling Metric Errors First of all, there is a significant difference between an 'error' and an 'alert'. An 'alert' is the violation of a condition (a threshold) specified for a given metric. That means that the Agent is collecting and gathering the data for the metric, but there is a situation that requires the attention of an administrator. An 'error' on the other hand however, is a failure to collect metric data: The Agent is throwing the error because it cannot determine the value for the metric Whereas the 'alert' guarantees continuity of the metric data, an 'error' signals a big unknown. And the unknown aspect of all this is what makes an error a lot more serious than a regular alert: If you don't know what the current state of affairs is, there could be some serious issues brewing that nobody is aware of... The life-cycle of a Metric Error Clearing a metric error is pretty much the same workflow as a metric 'alert': The Agent signals the error after it failed to execute the metric The error is uploaded to the OMS/repository, where it becomes visible in the Console The error will remain active until the Agent is able to execute the metric successfully. Even though the metric is still getting scheduled and executed on a regular basis, the error will remain outstanding as long as the Agent is not capable of executing the metric correctly Knowing this, the way to fix the metric error should be obvious: Take the 'problem' away, and as soon as the metric is executed again (based on the frequency of the metric), the error will go away. The same tricks used to clear alerts can be used here too: Wait for the next scheduled execution. For those metrics that are executed regularly (like every 15 minutes or so), it's just a matter of waiting those minutes to see the updates. The 'Reevaluate Alert' button can be used to force a re-execution of the metric. In case a metric is executed once a day, this will be a better way to make sure that the underlying problem has been solved. And if it has been, the metric error will be removed, and the regular data points will be uploaded to the repository. And just in case you have to 'force' the issue a little: If you disable and re-enable a metric, it will get re-scheduled. And that means a new metric execution, and an update of the (hopefully) fixed problem. Database server-generated alerts and problem checkers There are various ways the Agent can collect metric data: Via a script or a SQL statement, reading a log file, getting a value from an SNMP OID or listening for SNMP traps or via the DBMS_SERVER_ALERTS mechanism of an Oracle database. For those alert which are generated by the database (like tablespace metrics for 10g and above databases), the Agent just 'waits' for the database to report any new findings. If the Agent has lost the current state of the server-side metrics (due to an incomplete recovery after a disaster, or after an improper use of the 'emctl clearstate' command), the Agent might be still aware of an alert that the database no longer has (or vice versa). The same goes for 'problem checker' alerts: Those metrics that only report data if there is a problem (like the 'invalid objects' metric) will also have a problem if the Agent state has been tampered with (again, the incomplete recovery, and after improper use of 'emctl clearstate' are the two main causes for this). The best way to deal with these kinds of mismatches, is to simple disable and re-enable the metric again: The disabling will clear the state of the metric, and the re-enabling will force a re-execution of the metric, so the new and updated results can get uploaded to the repository. Starting 10gR5, the Agent performs additional checks and verifications after each restart of the Agent and/or each state change of the database (shutdown/startup or failover in case of DataGuard) to catch these kinds of mismatches.

    Read the article

  • The dislikes of TDD

    - by andrewstopford
    I enjoy debates about TDD and Brian Harrys blog post is no exception. Brian sounds out what he likes and dislikes about TDD and it's the dislikes I'll focus on. The idea of having unit tests that cover virtually every line of code that I’ve written that I have to refactor every time I refactor my code makes me shudder.  Doing this way makes me take nearly twice as long as it would otherwise take and I don’t feel like I get sufficient benefits from it. Refactoring your tests to match your refactored code sounds like the tests are suffering. Too many hard dependencies with no SOLID concerns are a sure fire reason you would do this. Maybe at the start of a TDD cycle you would need to do this as your design evolves and you remove these dependencies but this should quickly be resolved as you refactor. If you find your self still doing it then stop and look back at your design. Don’t get me wrong, I’m a big fan of unit tests.  I just prefer to write them after the code has stopped shaking a bit.  In fact most of my early testing is “manual”.  Either I write a small UI on top of my service that allows me to plug in values and try it or write some quick API tests that I throw away as soon as I have validated them. The problem with this is that a UI can make assumptions on your code that then just unit test around and very quickly the design becomes bad and you technical debt sweeps in. If you want to blackbox test your code with a UI then do so after your TDD cycles not before. This is probably by biggest issue with a literal TDD interpretation.  TDD says you never write a line of code without a failing test to show you need it.  I find it leads developers down a dangerous path.  Without any help from a methodology, I have met way too many developers in my life that “back into a solution”.  By this, I mean they write something, it mostly works and they discover a new requirement so they tack it on, and another and another and when they are done, they’ve got a monstrosity of special cases each designed to handle one specific scenario.  There’s way more code than there should be and it’s way too complicated to understand. I believe in finding general solutions to problems from which all the special cases naturally derive rather than building a solution of special cases.  In my mind, to do this, you have to start by conceptualizing and coding the framework of the general algorithm.  For me, that’s a relatively monolithic exercise. TDD is an development pratice not a methodology, the danger is that the solution becomes a mass of different things that violate DRY. TDD won't solve these problems, only good communication and practices like pairing will help. Above all else an assumption that TDD replaces a methodology is a mistake, combine it with what ever works for your team\business but only good communication will help. A good naming scheme\structure for folders, files and tests can help you and your team isolate what tests are for what.

    Read the article

  • Silverlight Cream for February 04, 2011 -- #1040

    - by Dave Campbell
    In this Issue: Shawn Wildermuth, John Papa, Jesse Liberty(-2-), Mike Wolf, Matt Casto, Levente Mihály, Roy Dallal, Mark Monster, Andrea Boschin, and Oren Gal. Above the Fold: Silverlight: "Accept and Cancel Buttons Behavior in Silverlight" Matt Casto WP7: "Windows Phone 7 Runtime Debugging" Mike Wolf Shoutouts: Al Pascual announced a get-together if you're going to be in Phoenix on February 10 (next Thursday)... I just can't tell what time it is from the page: Phoenix Dev Meet-Up From SilverlightCream.com: Ten Pet Peeves of WP7 Applications Check out Shawn Wildermuth's Top 10 annoyances when trying out any new app on the WP7... if you're a dev, you might want to keep these in mind. Silverlight TV 60: Checking Out the Zero Gravity Game, Now on Windows Phone 7 John Papa has Silverlight TV number 60 up and this one features Phoenix' own Ryan Plemons discussing the game Zero Gravity and some of the things he had to do to take the game to WP7 ... and the presentation looks as good from here as it did inside the studio :) The Full Stack: Entity Framework To Phone, The Server Side Jesse Liberty and Jon Galloway have Part 6 of their full-stack podcast up ... this is their exploration of MVC3, ASP.NET, Silverlight, and WP7... pair programming indeed! Life Cycle: Page State Management Jesse Liberty also has episode 29 (can you believe that??) of his Windows Phone From Scratch series up ... he's continuing his previous LifeCycle discussion with Page State Management this time. Windows Phone 7 Runtime Debugging Mike Wolf is one of those guys that when he blogs, we should all pay attention, and this post is no exception... he has contributed a run-time diagnostics logger to the WP7Contrib project ... wow... too cool! Accept and Cancel Buttons Behavior in Silverlight Matt Casto has his blog back up and has a behavior up some intuitive UX on ChildWindows by being able to bind to a default or cancel button and have those events activated when the user hits Enter or Escape... very cool, Matt! A classic memory game: Part 3 - Porting the game to Windows Phone 7 Levente Mihály has Part 3 of his tutorial series up at SilverlightShow, and this go-around is porting his 'memory game' to WP7... and this is pretty all-encompassing... Blend for the UI, Performance, and Tombstoning... plus all the source. Silverlight Memory Leak, Part 1 Roy Dallal completely describes how he used a couple easily-downloadable tools to find the root cause of his memory problems with is Silvleright app. Lots of good investigative information. How to cancel the closing of your Silverlight application (in-browser and out-of-browser) Mark Monster revisits a two-year old post of his on cancelling the closing of a Silverlight app... and he's bringing that concept of warning the user the he's about to exit into the OOB situation as well. Windows Phone 7 - Part #3: Understanding navigation Also continuing his WP7 tutorial series on SilverlightShow, Andrea Boschin has part 3 up which is all about Navigation and preserving state... he also has a video on the page to help demonstrate the GoBack method. Multiple page printing in Silverlight 4 Oren Gal built a Silverlight app for last years' ESRI dev summit, and decided to upgrade it this year with functionality such as save/restore, selecting favorite sessions, and printing. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • OSB and Coherence Integration

    - by mark.ms.smith
    Anyone who has tried to manage Coherence nodes or tried to cache results in OSB, will appreciate the new functionality now available. As of WebLogic Server 10.3.4, you can use the WebLogic Administration Server, via the Administration Console or WLST, and java-based Node Manager to manage and monitor the life cycle of stand-alone Coherence cache servers. This is a great step forward as the previous options mainly involved writing your own scripts to do this. You can find an excellent description of how this works at James Bayer’s blog. You can also find the WebLogic documentation here.As of Oracle Service Bus 11gR1 (11.1.1.3.0), OSB now supports service result caching for Business Bervices with Coherence. If you use Business Services that return somewhat static results that do not change often, you can configure those Business Services to cache results. For Business Services that use result caching, you can control the time to live for the cached result. After the cached result expires, the next Business Service call results in invoking the back-end service to get the result. This result is then stored in the cache for future requests to access. I’m thinking that this caching functionality would be perfect for some sort of cross reference data that was refreshed nightly by batch. You can find the OSB Business Service documentation here.Result Caching in a dedicated JVMThis example demonstrates these new features by configuring a OSB Business Service to cache results in a separate Coherence JVM managed by WebLogic. The reason why you may want to use a separate, dedicated JVM is that the result cache data could potentially be quite large and you may want to protect your OSB java heap.In this example, the client will call an OSB Proxy Service to get Employee data based on an Employee Id. Using a Business Service, OSB calls an external system. The results are automatically cached and when called again, the respective results are retrieved from the cache rather than the external system.Step 1 – Set up your Coherence Server Via the OSB Administration Server Console, create your Coherence Server to be used as the results cache.Here are the configured Coherence Server arguments from the Server Start tab. Note that I’m using the default Cache Config and Override files in the domain.-Xms256m -Xmx512m -XX:PermSize=128m -XX:MaxPermSize=256m -Dtangosol.coherence.override=/app/middleware/jdev_11.1.1.4/user_projects/domains/osb_domain2/config/osb/coherence/osb-coherence-override.xml -Dtangosol.coherence.cluster=OSB-cluster -Dtangosol.coherence.cacheconfig=/app/middleware/jdev_11.1.1.4/user_projects/domains/osb_domain2/config/osb/coherence/osb-coherence-cache-config.xml -Dtangosol.coherence.distributed.localstorage=true -Dtangosol.coherence.management=all -Dtangosol.coherence.management.remote=true -Dcom.sun.management.jmxremote Just incase you need it, here is my Coherence Server classpath:/app/middleware/jdev_11.1.1.4/oracle_common/modules/oracle.coherence_3.6/coherence.jar: /app/middleware/jdev_11.1.1.4/modules/features/weblogic.server.modules.coherence.server_10.3.4.0.jar: /app/middleware/jdev_11.1.1.4/oracle_osb/lib/osb-coherence-client.jarBy default, OSB will try and create a local result cache instance. You need to disable this by adding the following JVM parameters to each of the OSB Managed Servers:-Dtangosol.coherence.distributed.localstorage=false -DOSB.coherence.cluster=OSB-clusterIf you need more information on configuring a remote result cache, have a look at the configuration documentration under the heading Using an Out-of-Process Coherence Cache Server.Step 2 – Configure your Business Service Under the respective Business Service Message Handling Configuration (Advanced Properties), you need to enable “Result Caching”. Additionally, you need to determine what the cache data will be keyed on. In the example below, I’m keying it on the unique Employee Id.The Results As this test was on my laptop, the actual timings are just an indication that there is a benefit to caching results. Using my test harness, I sent 10,000 requests to OSB, all with the same Employee Id. In this case, I had result caching disabled.You can see that this caused the back end Business Service (BS_GetEmployeeData) to be called for each request. Then after enabling result caching, I sent the same number of identical requests.You can now see the Business Service was only invoked once on the first request. All subsequent requests used the Results Cache.

    Read the article

  • Am I right about the differences between Floyd-Warshall, Dijkstra's and Bellman-Ford algorithms?

    - by Programming Noob
    I've been studying the three and I'm stating my inferences from them below. Could someone tell me if I have understood them accurately enough or not? Thank you. Dijkstra's algorithm is used only when you have a single source and you want to know the smallest path from one node to another, but fails in cases like this Floyd-Warshall's algorithm is used when any of all the nodes can be a source, so you want the shortest distance to reach any destination node from any source node. This only fails when there are negative cycles (this is the most important one. I mean, this is the one I'm least sure about:) 3.Bellman-Ford is used like Dijkstra's, when there is only one source. This can handle negative weights and its working is the same as Floyd-Warshall's except for one source, right? If you need to have a look, the corresponding algorithms are (courtesy Wikipedia): Bellman-Ford: procedure BellmanFord(list vertices, list edges, vertex source) // This implementation takes in a graph, represented as lists of vertices // and edges, and modifies the vertices so that their distance and // predecessor attributes store the shortest paths. // Step 1: initialize graph for each vertex v in vertices: if v is source then v.distance := 0 else v.distance := infinity v.predecessor := null // Step 2: relax edges repeatedly for i from 1 to size(vertices)-1: for each edge uv in edges: // uv is the edge from u to v u := uv.source v := uv.destination if u.distance + uv.weight < v.distance: v.distance := u.distance + uv.weight v.predecessor := u // Step 3: check for negative-weight cycles for each edge uv in edges: u := uv.source v := uv.destination if u.distance + uv.weight < v.distance: error "Graph contains a negative-weight cycle" Dijkstra: 1 function Dijkstra(Graph, source): 2 for each vertex v in Graph: // Initializations 3 dist[v] := infinity ; // Unknown distance function from 4 // source to v 5 previous[v] := undefined ; // Previous node in optimal path 6 // from source 7 8 dist[source] := 0 ; // Distance from source to source 9 Q := the set of all nodes in Graph ; // All nodes in the graph are 10 // unoptimized - thus are in Q 11 while Q is not empty: // The main loop 12 u := vertex in Q with smallest distance in dist[] ; // Start node in first case 13 if dist[u] = infinity: 14 break ; // all remaining vertices are 15 // inaccessible from source 16 17 remove u from Q ; 18 for each neighbor v of u: // where v has not yet been 19 removed from Q. 20 alt := dist[u] + dist_between(u, v) ; 21 if alt < dist[v]: // Relax (u,v,a) 22 dist[v] := alt ; 23 previous[v] := u ; 24 decrease-key v in Q; // Reorder v in the Queue 25 return dist; Floyd-Warshall: 1 /* Assume a function edgeCost(i,j) which returns the cost of the edge from i to j 2 (infinity if there is none). 3 Also assume that n is the number of vertices and edgeCost(i,i) = 0 4 */ 5 6 int path[][]; 7 /* A 2-dimensional matrix. At each step in the algorithm, path[i][j] is the shortest path 8 from i to j using intermediate vertices (1..k-1). Each path[i][j] is initialized to 9 edgeCost(i,j). 10 */ 11 12 procedure FloydWarshall () 13 for k := 1 to n 14 for i := 1 to n 15 for j := 1 to n 16 path[i][j] = min ( path[i][j], path[i][k]+path[k][j] );

    Read the article

  • glsl shader to allow color change of skydome ogre3d

    - by Tim
    I'm still very new to all this but learning a lot. I'm putting together an application using Ogre3d as the rendering engine. So far I've got it running, with a simple scene, a day/night cycle system which is working okay. I'm now moving on to looking at changing the color of the skydome material based on the time of day. What I've done so far is to create a struct to hold the ColourValues for the different aspects of the scene. struct todColors { Ogre::ColourValue sky; Ogre::ColourValue ambient; Ogre::ColourValue sun; }; I created an array to store all the colours todColors sceneColours [4]; I populated the array with the colours I want to use for the various times of the day. For instance DayTime (when the sun is high in the sky) sceneColours[2].sky = Ogre::ColourValue(135/255, 206/255, 235/255, 255); sceneColours[2].ambient = Ogre::ColourValue(135/255, 206/255, 235/255, 255); sceneColours[2].sun = Ogre::ColourValue(135/255, 206/255, 235/255, 255); I've got code to work out the time of the day using a float currentHours to store the current hour of the day 10.5 = 10:30 am. This updates constantly and updates the sun as required. I am then calculating the appropriate colours for the time of day when relevant using else if( currentHour >= 4 && currentHour < 7) { // Lerp from night to morning Ogre::ColourValue lerp = Ogre::Math::lerp<Ogre::ColourValue, float>(sceneColours[GT_TOD_NIGHT].sky , sceneColours[GT_TOD_MORNING].sky, (currentHour - 4) / (7 - 4)); } My original attempt to get this to work was to dynamically generate a material with the new colour and apply that material to the skydome. This, as you can probably guess... didn't go well. I know it's possible to use shaders where you can pass information such as colour to the shader from the code but I am unsure if there is an existing simple shader to change a colour like this or if I need to create one. What is involved in creating a shader and material definition that would allow me to change the colour of a material without the overheads of dynamically generating materials all the time? EDIT : I've created a glsl vertex and fragment shaders as follows. Vertex uniform vec4 newColor; void main() { gl_FrontColor = newColor; gl_Position = ftransform(); } Fragment void main() { gl_FragColor = gl_Color; } I can pass a colour to it using ShaderDesigner and it seems to work. I now need to investigate how to use it within Ogre as a material. EDIT : I created a material file like this : vertex_program colour_vs_test glsl { source test.vert default_params { param_named newColor float4 0.0 0.0 0.0 1 } } fragment_program colour_fs_glsl glsl { source test.frag } material Test/SkyColor { technique { pass { lighting off fragment_program_ref colour_fs_glsl { } vertex_program_ref colour_vs_test { } } } } In the code I have tried : Ogre::MaterialPtr material = Ogre::MaterialManager::getSingleton().getByName("Test/SkyColor"); Ogre::GpuProgramParametersSharedPtr params = material->getTechnique(0)->getPass(0)->getVertexProgramParameters(); params->setNamedConstant("newcolor", Ogre::Vector4(0.7, 0.5, 0.3, 1)); I've set that as the Skydome material which seems to work initially. I am doing the same with the code that is attempting to lerp between colours, but when I include it there, it all goes black. Seems like there is now a problem with my colour lerping.

    Read the article

  • BizTalk 2009 - Architecture Decisions

    - by StuartBrierley
    In the first step towards implementing a BizTalk 2009 environment, from development through to live, I put forward a proposal that detailed the options available, as well as the costs and benefits associated with these options, to allow an informed discusion to take place with the business drivers and budget holders of the project.  This ultimately lead to a decision being made to implement an initial BizTalk Server 2009 environment using the Standard Edition of the product. It is my hope that in the long term, as projects require it and allow, we will be looking to implement my ideal recommendation of a multi-server enterprise level environment, but given the differences in cost and the likely initial work load for the environment this was not something that I could fully recommend at this time.  However, it must be noted that this decision was made in full awareness of the limits of the standard edition, and the business drivers of this project were made fully aware of the risks associated with running without the failover capabilities of the enterprise edition. When considering the creation of this new BizTalk Server 2009 environment, I have also recommended the creation of the following pre-production environments:   Usage Environment Development Development of solutions; Unit testing against technical specifications; Initial load testing; Testing of deployment packages;  Visual Studio; BizTalk; SQL; Client PCs/Laptops; Server environment similar to Live implementation; Test Testing of Solutions against business and technical requirements;  BizTalk; SQL; Server environment similar to Live implementation; Pseudo-Live As Live environment to allow testing against Live implementation; Acts as back-up hardware in case of failure of Live environment; BizTalk; SQL; Server environment identical to Live implementation; The creation of these differing environments allows for the separation of the various stages of the development cycle.  The development environment is for use when actively developing a solution, it is a potentially volatile environment whose state at any given time can not be guaranteed.  It allows developers to carry out initial tests in an environment that is similar to the live environment and also provides an area for the testing of deployment packages prior to any release to the test environment. The test environment is intended to be a semi-volatile environment that is similar to the live environment.  It will change periodically through the development of a solution (or solutions) but should be otherwise stable.  It allows for the continued testing of a solution against requirements without the worry that the environment is being actively changed by any ongoing development.  This separation of development and test is crucial in ensuring the quality and control of the tested solution. The pseudo-live environment should be considered to be an almost static environment.  It should mimic the live environment and can act as back up hardware in the case of live failure.  This environment acts as an area to allow for “as live” testing, where the performance and behaviour of the live solutions can be replicated.  There should be relatively few changes to this environment, with software releases limited to “release candidate” level releases prior to going live. Whereas the pseudo-live environment should always mimic the live environment, to save on costs the development and test servers could be implemented on lower specification hardware.  Consideration can also be given to the use of a virtual server environment to further reduce hardware costs in the development and test environments, indeed this virtual approach can also be extended to pseudo-live and live assuming the underlying technology is in place. Although there is no requirement for the development and test server environments to be identical to live, the overriding architecture implemented should be the same as in live and an understanding must be gained of the performance differences to be expected across the different environments.

    Read the article

  • Silverlight Cream for February 09, 2011 -- #1044

    - by Dave Campbell
    In this Issue: Vikas, Tony Champion, Peter Kuhn, Ollie Riches, Rich Griffin, Rob Eisenberg, Andrea Boschin, Rudi Grobler(-2-), Jesse Liberty, Dan Wahlin, Roberto Sonnino, Deborah Kurata. Above the Fold: Silverlight: "Silverlight double click event" Vikas WP7: "Logging in Silverlight and WP7 with MVVM Light" Tony Champion XNA: "XNA for Silverlight developers: Part 3 - Animation (transforms)" Peter Kuhn Shoutouts: Vikas deserves congratulations for passing the beta Silverlight 4 exam, but in the process he has a great list of resources to help you do the same: Exam 70-506 ( TS: Silverlight 4, Development ) From SilverlightCream.com: Silverlight double click event Vikas demonstrates 3 ways to come up with a double-click in Silverlight: Timer, Rx Framework, and Behavior with code for each. Logging in Silverlight and WP7 with MVVM Light Tony Champion is discussing logging... and since he finds himself doing it in every project, he's setting up an extensible solution he can reuse and is doing so with MVVMLight XNA for Silverlight developers: Part 3 - Animation (transforms) Peter Kuhn has part 3 of his XNA for WP7 series up at SilverlightShow. In this 3rd tutorial, Peter is discussing animation with Transformations.... remember... this is XNA! WP7Contrib: Location Push Model Ollie Riches posts from the WP7C and discusses how they provide an interface for location service by abstracting away the GeoCoordinateWatcher class and provide a clean push model using the IObservable as the return types for all variants. WP7 Contrib – When messaging becomes messy and services shine Rich Griffin pulls another post up from WP7C where he discusses swapping out using Service Styles rather than Messenger Styles... in his words "when we start getting friction trying to bend the framework api to do something that it was not really meant for its time to use something [that] solves the problem better" Herding Code 104: Rob Eisenberg on Caliburn Micro Rob Eisenberg is interviewed on the latest Herding Code, talking about his baby, Caliburn Micro, and tons of other stuff as well... just check out the list of links generated for this show. Windows Phone 7 - Part #4: The application lifecycle Andrea Boschin has part 4 of his WP7 tutorial series up at SilverlightShow... In this tutorial he does a complete run-down the the WP7 Application Life-Cycle Simple Error Reporting on WP7 Rudi Grobler has a code snippet up that, with the end-user's permission of course, emails problem reports back to you... very cool idea. Simple Error Reporting on WP7 REDUX Rudi Grobler demonstrates using the Coding4Fun toolkit to display an exception prompt to the user... and then possibly email the report to you..see Rudi's other post on that. Creating An Application Bar–Don’t Panic In his latest (number 31) WP7 From Scratch episode, Jesse Liberty takes on the ApplicationBar, and uses Blend to get the job done easier. Syncing Data with a Server using Silverlight and HTTP Polling Duplex Dan Wahlin revisits some older posts of his about Push technologies in Silverlight, and provides some great insight (and code) into Http Polling Duplex Quick WPF/Silverlight tips to make great videos of your apps Roberto Sonnino has some great tips on making awesome videos of your WPF or Silverlight app. Simple Silverlight MVVM Base Class Deborah Kurata has her take at a good MVVM base class as the subject of her latest post... good points and good code. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • Windows Azure Use Case: New Development

    - by BuckWoody
    This is one in a series of posts on when and where to use a distributed architecture design in your organization's computing needs. You can find the main post here: http://blogs.msdn.com/b/buckwoody/archive/2011/01/18/windows-azure-and-sql-azure-use-cases.aspx Description: Computing platforms evolve over time. Originally computers were directed by hardware wiring - that, the “code” was the path of the wiring that directed an electrical signal from one component to another, or in some cases a physical switch controlled the path. From there software was developed, first in a very low machine language, then when compilers were created, computer languages could more closely mimic written statements. These language statements can be compiled into the lower-level machine language still used by computers today. Microprocessors replaced logic circuits, sometimes with fewer instructions (Reduced Instruction Set Computing, RISC) and sometimes with more instructions (Complex Instruction Set Computing, CISC). The reason this history is important is that along each technology advancement, computer code has adapted. Writing software for a RISC architecture is significantly different than developing for a CISC architecture. And moving to a Distributed Architecture like Windows Azure also has specific implementation details that our code must follow. But why make a change? As I’ve described, we need to make the change to our code to follow advances in technology. There’s no point in change for its own sake, but as a new paradigm offers benefits to our users, it’s important for us to leverage those benefits where it makes sense. That’s most often done in new development projects. It’s a far simpler task to take a new project and adapt it to Windows Azure than to try and retrofit older code designed in a previous computing environment. We can still use the same coding languages (.NET, Java, C++) to write code for Windows Azure, but we need to think about the architecture of that code on a new project so that it runs in the most efficient, cost-effective way in a Distributed Architecture. As we receive new requests from the organization for new projects, a distributed architecture paradigm belongs in the decision matrix for the platform target. Implementation: When you are designing new applications for Windows Azure (or any distributed architecture) there are many important details to consider. But at the risk of over-simplification, there are three main concepts to learn and architect within the new code: Stateless Programming - Stateless program is a prime concept within distributed architectures. Rather than each server owning the complete processing cycle, the information from an operation that needs to be retained (the “state”) should be persisted to another location c(like storage) common to all machines involved in the process.  An interesting learning process for Stateless Programming (although not unique to this language type) is to learn Functional Programming. Server-Side Processing - Along with developing using a Stateless Design, the closer you can locate the code processing to the data, the less expensive and faster the code will run. When you control the network layer, this is less important, since you can send vast amounts of data between the server and client, allowing the client to perform processing. In a distributed architecture, you don’t always own the network, so it’s performance is unpredictable. Also, you may not be able to control the platform the user is on (such as a smartphone, PC or tablet), so it’s imperative to deliver only results and graphical elements where possible.  Token-Based Authentication - Also called “Claims-Based Authorization”, this code practice means instead of allowing a user to log on once and then running code in that context, a more granular level of security is used. A “token” or “claim”, often represented as a Certificate, is sent along for a series or even one request. In other words, every call to the code is authenticated against the token, rather than allowing a user free reign within the code call. While this is more work initially, it can bring a greater level of security, and it is far more resilient to disconnections. Resources: See the references of “Nondistributed Deployment” and “Distributed Deployment” at the top of this article for more information with graphics:  http://msdn.microsoft.com/en-us/library/ee658120.aspx  Stack Overflow has a good thread on functional programming: http://stackoverflow.com/questions/844536/advantages-of-stateless-programming  Another good discussion on Stack Overflow on server-side processing is here: http://stackoverflow.com/questions/3064018/client-side-or-server-side-processing Claims Based Authorization is described here: http://msdn.microsoft.com/en-us/magazine/ee335707.aspx

    Read the article

  • how to drawing continues line just like in paint [on hold]

    - by hussain shah
    hi sir i want to draw a points.the following code is work good but the problem is than when i drag the mouse button, if i move slow working good but if i move the curser fast they cannot made continues line.please what is the solution...? #include <iostream> #include <GL/glut.h> #include <GL/glu.h> #include <stdlib.h> void first() { glPushMatrix(); glTranslatef(1,01,01); glScalef(1, 1, 1); glColor3f(0, 1, 0); glBegin(GL_QUADS); glVertex2f(0.8, 0.6); glVertex2f(0.6, 0.6); glVertex2f(0.6, 0.8); glVertex2f(0.8, 0.8); glEnd(); glPopMatrix(); glFlush(); } void display (void) { glClear(GL_COLOR_BUFFER_BIT); //store color of each pixels of a frame glClearColor(0, 0, 0, 0);// screen color //glFlush(); } void drag (int x, int y) { { y=500-y; //x=500-x; glPointSize(5); glColor3f(1.0,1.0,1.0); glBegin(GL_POINTS); glVertex2f(x,y+2); glEnd(); glutSwapBuffers(); glFlush(); } } void reshape (int w, int h){} void init (void) { glClear(GL_COLOR_BUFFER_BIT); //store color of each pixels of a frame glClearColor(0, 0, 0, 0); glViewport(0,0,500,500); glMatrixMode(GL_PROJECTION); glLoadIdentity(); glOrtho(0.0, 500.0, 0.0, 500.0, 1.0, -1.0); glMatrixMode(GL_MODELVIEW); glLoadIdentity(); } void mouse_button (int button, int state, int x, int y) { if (button == GLUT_LEFT_BUTTON && state == GLUT_DOWN) { drag(x,y); first(); } //else if (button == GLUT_MIDDLE_BUTTON && state == GLUT_DOWN) //{ // //} else if (button == GLUT_RIGHT_BUTTON && state == GLUT_DOWN) { exit(0); } } int main (int argc, char**argv) { glutInit (&argc, argv); //initialize the program. glutInitDisplayMode (GLUT_SINGLE); //set up a basic display buffer (only singular for now) glutInitWindowSize (500,500); //set whe width and height of the window glutInitWindowPosition (100, 100); //set the position of the window glutCreateWindow ("A basic OpenGL Window"); //set the caption for the window glutMotionFunc(drag); //glutMouseFunc(mouse_button); init(); glutDisplayFunc (display);//call the display function to draw our world glutMainLoop(); //initialize the OpenGL loop cycle return 0; }

    Read the article

  • Windows Azure Use Case: New Development

    - by BuckWoody
    This is one in a series of posts on when and where to use a distributed architecture design in your organization's computing needs. You can find the main post here: http://blogs.msdn.com/b/buckwoody/archive/2011/01/18/windows-azure-and-sql-azure-use-cases.aspx Description: Computing platforms evolve over time. Originally computers were directed by hardware wiring - that, the “code” was the path of the wiring that directed an electrical signal from one component to another, or in some cases a physical switch controlled the path. From there software was developed, first in a very low machine language, then when compilers were created, computer languages could more closely mimic written statements. These language statements can be compiled into the lower-level machine language still used by computers today. Microprocessors replaced logic circuits, sometimes with fewer instructions (Reduced Instruction Set Computing, RISC) and sometimes with more instructions (Complex Instruction Set Computing, CISC). The reason this history is important is that along each technology advancement, computer code has adapted. Writing software for a RISC architecture is significantly different than developing for a CISC architecture. And moving to a Distributed Architecture like Windows Azure also has specific implementation details that our code must follow. But why make a change? As I’ve described, we need to make the change to our code to follow advances in technology. There’s no point in change for its own sake, but as a new paradigm offers benefits to our users, it’s important for us to leverage those benefits where it makes sense. That’s most often done in new development projects. It’s a far simpler task to take a new project and adapt it to Windows Azure than to try and retrofit older code designed in a previous computing environment. We can still use the same coding languages (.NET, Java, C++) to write code for Windows Azure, but we need to think about the architecture of that code on a new project so that it runs in the most efficient, cost-effective way in a Distributed Architecture. As we receive new requests from the organization for new projects, a distributed architecture paradigm belongs in the decision matrix for the platform target. Implementation: When you are designing new applications for Windows Azure (or any distributed architecture) there are many important details to consider. But at the risk of over-simplification, there are three main concepts to learn and architect within the new code: Stateless Programming - Stateless program is a prime concept within distributed architectures. Rather than each server owning the complete processing cycle, the information from an operation that needs to be retained (the “state”) should be persisted to another location c(like storage) common to all machines involved in the process.  An interesting learning process for Stateless Programming (although not unique to this language type) is to learn Functional Programming. Server-Side Processing - Along with developing using a Stateless Design, the closer you can locate the code processing to the data, the less expensive and faster the code will run. When you control the network layer, this is less important, since you can send vast amounts of data between the server and client, allowing the client to perform processing. In a distributed architecture, you don’t always own the network, so it’s performance is unpredictable. Also, you may not be able to control the platform the user is on (such as a smartphone, PC or tablet), so it’s imperative to deliver only results and graphical elements where possible.  Token-Based Authentication - Also called “Claims-Based Authorization”, this code practice means instead of allowing a user to log on once and then running code in that context, a more granular level of security is used. A “token” or “claim”, often represented as a Certificate, is sent along for a series or even one request. In other words, every call to the code is authenticated against the token, rather than allowing a user free reign within the code call. While this is more work initially, it can bring a greater level of security, and it is far more resilient to disconnections. Resources: See the references of “Nondistributed Deployment” and “Distributed Deployment” at the top of this article for more information with graphics:  http://msdn.microsoft.com/en-us/library/ee658120.aspx  Stack Overflow has a good thread on functional programming: http://stackoverflow.com/questions/844536/advantages-of-stateless-programming  Another good discussion on Stack Overflow on server-side processing is here: http://stackoverflow.com/questions/3064018/client-side-or-server-side-processing Claims Based Authorization is described here: http://msdn.microsoft.com/en-us/magazine/ee335707.aspx

    Read the article

  • Part 9: EBS Customizations, how to track

    - by volker.eckardt(at)oracle.com
    In the previous blogs we were concentrating on the preparation tasks. We have defined standards, we know about the tools and techniques we will start with. Additionally, we have defined the modification strategy, and how to handle such topics best. Now we are ready to take the requirements! Such requirements coming over in spreadsheets, word files (like GAP documents), or in any other format. As we have to assign some attributes, we start numbering all that and assign a short name to each of these requirements (=CEMLI reference). We may also have already a Functional person assigned, and we might involve someone from the tech team to estimate, and we like to assign a status such as 'planned', 'estimated' etc. All these data are usually kept in spreadsheets, but I would put them into a database (yes, I am from Oracle :). If you don't have any good looking and centralized application already, please give a try with Oracle APEX. It should be up and running in a day and the imported sheets are than manageable concurrently!  For one of my clients I have created this CEMLI-DB; in between enriched with a lot of additional functionality, but initially it was just a simple centralized CEMLI tracking application. Why I am pointing out again the centralized method to manage such data? Well, your data quality will dramatically increase, if you let your project members see (also review and update) "your" data.  APEX allows you to filter, sort, print, and also export. And if you can spend some time to define proper value lists, everyone will gain from. APEX allows you to work in 'agile' mode, means you can improve your application step by step. Let's say you like to reference a document, or even upload the same, you can do that. Or, you need to classify the CEMLIs by release, just add this release field, same for business area or CEMLI type. One CEMLI record may then look like this: Prepare one or two (online) reports, to be ready to present your "workload" to the project management. Use such extracts also when you work offline (to prioritize etc.). But as soon as you are again connected, feed the data back into the central application. Note: I have combined this application with an additional issue tracker.  Here the most important element is the CEMLI reference, which acts as link to any other application (if you are not using APEX also as issue tracker :).  Please spend a minute to define such a reference (see blog Part 8: How to name Customizations).   Summary: Building the bridge from Gap analyse to the development has to be done in a controlled way. Usually the information is provided differently, but it is suggested to collect all requirements centrally. Oracle APEX is a great solution to enter and maintain such information in a structured, but flexible way. APEX helped me a lot to work with distributed development teams during the complete development cycle.

    Read the article

  • Required Parameters [SSIS Denali]

    - by jamiet
    SQL Server Integration Services (SSIS) in its 2005 and 2008 incarnations expects you to set a property values within your package at runtime using Configurations. SSIS developers tend to have rather a lot of issues with SSIS configurations; in this blog post I am going to highlight one of those problems and how it has been alleviated in SQL Server code-named Denali.   A configuration is a property path/value pair that exists outside of a package, typically within SQL Server or in a collection of one or more configurations in a file called a .dtsConfig file. Within the package one defines a pointer to a configuration that says to the package “When you execute, go and get a configuration value from this location” and if all goes well the package will fetch that configuration value as it starts to execute and you will see something like the following in your output log: Information: 0x40016041 at Package: The package is attempting to configure from the XML file "C:\Configs\MyConfig.dtsConfig". Unfortunately things DON’T always go well, perhaps the .dtsConfig file is unreachable or the name of the SQL Sever holding the configuration value has been defined incorrectly – any one of a number of things can go wrong. In this circumstance you might see something like the following in your log output instead: Warning: 0x80012014 at Package: The configuration file "C:\Configs\MyConfig.dtsConfig" cannot be found. Check the directory and file name. The problem that I want to draw attention to here though is that your package will ignore the fact it can’t find the configuration and executes anyway. This is really really bad because the package will not be doing what it is supposed to do and worse, if you have not isolated your environments you might not even know about it. Can you imagine a package executing for months and all the while inserting data into the wrong server? Sounds ridiculous but I have absolutely seen this happen and the root cause was that no-one picked up on configuration warnings like the one above. Happily in SSIS code-named Denali this problem has gone away as configurations have been replaced with parameters. Each parameter has a property called ‘Required’: Any parameter with Required=True must have a value passed to it when the package executes. Any attempt to execute the package will result in an error. Here we see that error when attempting to execute using the SSMS UI: and similarly when executing using T-SQL: Error is: Msg 27184, Level 16, State 1, Procedure prepare_execution, Line 112 In order to execute this package, you need to specify values for the required parameters.   As you can see, SSIS code-named Denali has mechanisms built-in to prevent the problem I described at the top of this blog post. Specifying a Parameter required means that any packages in that project cannot execute until a value for the parameter has been supplied. This is a very good thing. I am loathe to make recommendations so early in the development cycle but right now I’m thinking that all Project Parameters should have Required=True, certainly any that are used to define external locations should be anyway. @Jamiet

    Read the article

  • ArchBeat Facebook Friday: Top 10 Shared Links - May 30- June 5, 2014

    - by OTN ArchBeat
    The list below is comprised of the Top 10 most popular articles, blog posts, videos, and other content shared over the last seven days with the more than 5,100 people fans of the OTN ArchBeat Facebook Page. What is REST? | Maarten Smeets "Most Middleware developers will encounter RESTful services," says Oracle SOA / BPM / Java integration specialist Maarten Smeets. "It is good to understand what they are, what they should be and how they work." His extensive post will help you achieve that understanding. Integrating with Fusion Applications using SOAP web services and REST APIs | Arvind Srinivasamoorth This article, part one of Arvind Srinivasamoorth's two-part series on Integrating with Fusion Applications using SOAP web services and REST APIs, shows you how to identify the Fusion Applications SOAP web service to be invoked. Oracle Technology Network | Architect Community Have you visited the OTN Solution Architect homepage lately? I've just updated it with information about the big OTN Virtual Tech Summit on July 9, plus the latest OTN tech articles, and a fresh list of community videos and podcasts. Check it out! Starting and Stopping a Java EE Environment when using Oracle WebLogic | Rene van Wijk Oracle ACE Director and Oracle Fusion Middleware specialist Rene van Wijk explores ways to simplify the life-cycle management of a Java EE environment through the use of scripts developed with WebLogic Scripting Tool and Linux Bash. Application Composer Series: Where and When to use Groovy | Richard Bingham Richard Bingham describes his post as "more of a reference than an article." The post is comprised of a table that highlights where you can add your own custom logic via Groovy code and when you might use the various features. Kscope 2014: HFM Metadata Diagnostics | Eric Erikson Oracle Certified Hyperion Financial Management Specialist Eric Erikson will present three sessions at ODTUG Kscope 2014, June 22-26 in Seattle. Why should you care? Watch the video. Tuning Asynchronous Web Services in Fusion Applications | Jian Liang This article, the fourth in solution architect Jian Liang's five-part series on Fusion Applications and asynchronous Web Services, shows you how to conduct performance tuning of the asynchronous web services in relation to Fusion Applications. IDM FA Integration Flows | Thiago Leoncio Fusion Applications uses the Oracle Identity Management for its identity store and policy store by default. This article by solution architect Thiago Leoncio explains how user and role flows work from different points of view, using key IDM products for each flow in detail. GoldenGate and Oracle Data Integrator - A Perfect Match in 12c... Part 1: Getting Started | Michael Rainey Michael Rainey has already written extensively about about integration between Oracle Data Integrator and GoldenGate -- but he's not done. "With the release of the 12c versions of ODI and GoldenGate last October, and a soon-to-be-updated reference architecture, it’s time to write a few posts on the subject again, " he says. Here's the first of those posts. Video: Kscope 2014 Preview: Tim Tow on Essbase Java API and ODTUG Community Oracle ACE Director and ODTUG board member Tim Tow talks about his Kscope 2014 sessions focused on the Essbase Java API in this short video interview.

    Read the article

  • IPgallery banks on Solaris SPARC

    - by Frederic Pariente
    IPgallery is a global supplier of converged legacy and Next Generation Networks (NGN) products and solutions, including: core network components and cloud-based Value Added Services (VAS) for voice, video and data sessions. IPgallery enables network operators and service providers to offer advanced converged voice, chat, video/content services and rich unified social communications in a combined legacy (fixed/mobile), Over-the-Top (OTT) and Social Community (SC) environments for home and business customers. Technically speaking, this offer is a scalable and robust telco solution enabling operators to offer new services while controlling operating expenses (OPEX). In its solutions, IPgallery leverages the following Oracle components: Oracle Solaris, Netra T4 and SPARC T4 in order to provide a competitive and scalable solution without the price tag often associated with high-end systems. Oracle Solaris Binary Application Guarantee A unique feature of Oracle Solaris is the guaranteed binary compatibility between releases of the Solaris OS. That means, if a binary application runs on Solaris 2.6 or later, it will run on the latest release of Oracle Solaris.  IPgallery developed their application on Solaris 9 and Solaris 10 then runs it on Solaris 11, without any code modification or rebuild. The Solaris Binary Application Guarantee helps IPgallery protect their long-term investment in the development, training and maintenance of their applications. Oracle Solaris Image Packaging System (IPS) IPS is a new repository-based package management system that comes with Oracle Solaris 11. It provides a framework for complete software life-cycle management such as installation, upgrade and removal of software packages. IPgallery leverages this new packaging system in order to speed up and simplify software installation for the R&D and production environments. Notably, they use IPS to deliver Solaris Studio 12.3 packages as part of the rapid installation process of R&D environments, and during the production software deployment phase, they ensure software package integrity using the built-in verification feature. Solaris IPS thus improves IPgallery's time-to-market with a faster, more reliable software installation and deployment in production environments. Extreme Network Performance IPgallery saw a huge improvement in application performance both in CPU and I/O, when running on SPARC T4 architecture in compared to UltraSPARC T2 servers.  The same application (with the same activation environment) running on T2 consumes 40%-50% CPU, while it consumes only 10% of the CPU on T4. The testing environment comprised of: Softswitch (Call management), TappS (Telecom Application Server) and Billing Server running on same machine and initiating various services in capacity of 1000 CAPS (Call Attempts Per Second). In addition, tests showed a huge improvement in the performance of the TCP/IP stack, which reduces network layer processing and in the end Call Attempts latency. Finally, there is a huge improvement within the file system and disk I/O operations; they ran all tests with maximum logging capability and it didn't influence any benchmark values. "Due to the huge improvements in performance and capacity using the T4-1 architecture, IPgallery has engineered the solution with less hardware.  This means instead of deploying the solution on six T2-based machines, we will deploy on 2 redundant machines while utilizing Oracle Solaris Zones and Oracle VM for higher availability and virtualization" Shimon Lichter, VP R&D, IPgallery In conclusion, using the unique combination of Oracle Solaris and SPARC technologies, IPgallery is able to offer solutions with much lower TCO, while providing a higher level of service capacity, scalability and resiliency. This low-OPEX solution enables the operator, the end-customer, to deliver a high quality service while maintaining high profitability.

    Read the article

  • SOA Community Newsletter October 2013

    - by JuergenKress
    Dear SOA & BPM Partner Community member, Our October newsletter edition focuses on Oracle OpenWorld 2013, highlights, keynotes and all presentations. Thanks to all partners who made the conference a huge success. If you could not come to San Francisco you will find all the details within this newsletter. As the newsletter edition contains a lot of content thus we have three sections - SOA, BPM & ACM, and AppAdvantage & UX. Make sure you share your content with the community, best via twitter @soacommunity #soacommunity! What is new in SOA Suite 12c? At OOW the product management team demonstrated some of the key features of the upcoming version. The important SOA topics are mobile integration and cloud integration - make sure you re-use your existing SOA platform! Bruce Tierney showcased the Agilent mobile integration and you try the new Mobile Order Management for EBS GSE Demo using middleware technology. On cloud integration the product management team presented several OOW sessions and published two whitepapers. As SOA becomes mature the awareness for SOA Governance continues to raise, Introducing Oracle Enterprise Repository Express Workflows and watch Luis Weir: Challenges to Implementing SOA Governance. Thanks to Ronald for the SOA Made Simple | Introduction to SOA series, the next article in the Industrial SOA series is SOA and User Interfaces (UI). Have you achieved successful BPM implementation? Nominate your customer references for the Gartner Business Process Management Excellence Awards 2014. Do you want to showcase the latest BPM Suite? Make sure you use the hosted BPM PS6 (11.1.1.7) demo. Do you want to become an expert in BPM Suite? Attend one of our BPM Bootcamps in Germany, Netherland, Spain or UK! If you can not make it – we offer plenty of on-demand content Advanced BPM Scenarios & BPM Architecture Topics & Process Modeling and Life Cycle & Adaptive Case Management & Smart Application Extensibility with Oracle Process Accelerators. I would also recommend to watch great introduction to Adaptive Case Management the on-demand webcast with Bruce Silver & Ajay Khanna. Thanks to Mark Foster from the A-team for the ACM article series & Leon Smiers for their blog posts. If you accomplished a SOA Suite or BPM Suite project and want to become a certified SOA or BPM expert, we are offering again free vouchers to become a certified SOA & BPM expert (limited to partners in Europe Middle East and Africa). Don't miss this opportunity and become Specialized! Best regards, Jürgen Kress To read the newsletter please visit http://tinyurl.com/soaNewsOctober2013 (OPN Account required) To become a member of the SOA Partner Community please register at http://www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Mix Forum Technorati Tags: newsletter,SOA Community newsletter,SOA Community,Oracle,OPN,Jürgen Kress

    Read the article

< Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >