Search Results

Search found 1833 results on 74 pages for 'floppy disks'.

Page 45/74 | < Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >

  • iSCSI: LUNs per target?

    - by badnews
    My question relates specifically to ZFS/COMSTAR but I assume is generally applicable to any iSCSI system: Should one prefer to create a target for every LUN that you want to expose? Or is it good practise to have a single target with multiple LUNs? Does either approach have a performance impact? And is there some crossover point where the other approach makes sense? The use case is for VM disks, where each disk (zvol) is a LUN. So far we have created a a separate target for each VM; but a single target that contains all the LUNs would probably greatly simplify management... but we may need hundreds of LUNs per a single target. (And then possibly tens of initiator connections to that target)

    Read the article

  • Windows 7 setup can not find hard disk

    - by Akshay Kulkarni
    Previously I had an old Seagate barracuda 160GB HDD which got crashed some days before. Yesterday I bought new Hard Disk Seagate Barracuda 500GB (ST500DM002). I just replaced the 500GB hard disk with 160GB one leaving data and power cable intact and untouched. And ideally this new hard disk should start functioning. I tried to install Windows 7 with DVD the setup says you don't have any hard disks installed on your machine. I rechecked connection tried with Win XP setup but continued receiving same error. Do I need to do some initialization stuff with hard disk before installing setup? If so how to do it. If not then is there any problem with my newly bought hard disk? Thanks In Advance.

    Read the article

  • ZFS SAS/SATA controller recommendations

    - by ewwhite
    I've been working with OpenSolaris and ZFS for 6 months, primarily on a Sun Fire x4540 and standard Dell and HP hardware. One downside to standard Perc and HP Smart Array controllers is that they do not have a true "passthrough" JBOD mode to present individual disks to ZFS. One can configure multiple RAID 0 arrays and get them working in ZFS, but it impacts hotswap capabilities (thus requiring a reboot upon disk failure/replacement). I'm curious as to what SAS/SATA controllers are recommended for home-brewed ZFS JBODs. In addition, how does battery-backed write cache (BBWC) play into the solution?

    Read the article

  • Distributed, Parallel, Fault-tolerant File System

    - by Eddified
    There are so many choices that it's hard to know where to start. My requirements are these: Runs on Linux Most of the files will be between 5-9 MB in size. There will also be a significant number of small-ish jpgs (100px x 100px). All of the files need to be available over http. Redundancy -- ideally it would provide the space efficiency similar to RAID 5 of 75% (in RAID 5 this would be calculated thus: with 4 identical disks, 25% of the space is used for parity = 75% efficent) Must support several petabytes of data scalable runs on commodity hardware In addition, I look for these qualities, though they are not "requirements": Stable, mature file system Lots of momentum and support etc I would like some input as to which file system works best for the given requirements. Some people at my organization are leaning towards MogileFS, but I'm not convinced of the stability and momentum of that project. GlusterFS and Lustre, based on my limited research, appear to be better supported... Thoughts?

    Read the article

  • How can I find out which driver/file is being loaded when the system hangs during the Windows 7 boot

    - by user24247
    My desktop computer (1 OS, 1 drive, 1 partition) hangs during the Windows 7 boot process. When selecting F8 I can select Safe Boot which allows me to see the files processed during the boot process. I know that the last line displayed is the last file that was SUCCESFULLY loaded. How do I find out what the next line, and the potential candidate driver/file/program would have been? The unusual thing, at least in my experience, is that the freezing up of the system also happens when I boot from the Windows 7 install disks, which is preventing me from any repair options. With a failure of both, I cannot not restore Windows 7 to a previous date or uninstall drivers/programs that may be the cause of the hanging. Thanks for your responses. Marc

    Read the article

  • Problem setting up DL360G5 with scsi RAID

    - by ernelli
    I have a problem with reinstalling OS on a DL360G5. The BIOS [F9] do not detect any disc controllers and the HP SmartSetup did not find any compatible controllers. Inside the server, the two SCSI disks are conncted to a RAID controller using BCM8603 chipset. How is disc contoller supposed to be setup? I have tried to do a full BIOS reset. EDIT At the moment we suspect that the Smart Array controller E200i/412205-001 is broken. Are there any status LED's that indicate failure or success during start up? At the moment all LED's are off.

    Read the article

  • A list of 'best practices' for extending the life between charges of a notebook battery.

    - by Tim Visher
    Hello Everyone, I'd like to compile a list of best practices for getting the most out of a single charge of a typical notebook battery (be it Li-Ion or Li-Poly). Sources would be great as well. I've heard, for instance, that the best things to do to improve battery performance (not the total lifetime of the battery, just single charge performance) are, in descending order of effectiveness: Turn your display all the way down. Turn off WiFi Turn off Bluetooth Spin down disks when they're not in use. etc… I'd like to get sources together for these and other tips for extending life-between-charge for any battery on any notebook (as these really are all about Demand Management rather than Life lime extension. Thanks!

    Read the article

  • How do I share a complete XP disk so it can be seen from a Windows 7 system?

    - by Ian Ringrose
    This should be easier! (both computers can see the internet etc so I know the network it’s self is working) I have a normal home network with a Windows XP machine on it and the new Windows 7 (64 bit) machine. So I can transfer the files to the new Windows 7 machine, I wish to share the complete disk (and all files) from the Windows XP machine and access them from the Windows 7 machine. Is there a step by step set of instructions for doing this anywhere? So fare I have: put both computers into the same workgroup put the windows 7 machine into work network mode so it can see the XP machine in the work group shared the XP disk as read only But when I try to access a lot of the folders on the XP disks, I am told I am not allowed to access them. (I was not asked for any passwords by the windows 7 machine when I accessed the XP machine. The XP machine just has its default account with no password set on it)

    Read the article

  • Software RAID to hardware RAID, can it be done?

    - by gtaylor85
    Can it be done ... well. (For the record, I did not set this server up.) In my server there are 4 disks. 3 of them are in a software RAID5, and 1 has the OS installed. I want to buy a RAID controller, 4 new HDs and set up a hardware RAID5. If possible, I'd like to just image the current setup, and use it to build my new one. My questions are: Can I image a 3 disk RAID5 to 4 disk RAID5? Are there problems with this? What is considered best practice for your OS. To have it on a separate disk like it currently is, or to install it on the RAID5? Thank you. I can clarify anything. I'm not sure what other info might be pertinent.

    Read the article

  • Virtual PC lost parent disk for differential vhd

    - by SeeR
    2 years ago I had that brilliant idea to create base Windows XP disk which all of my VM with XP will use. Of course it ended that I had only one VM with XP :-). Today I needed to make some free space on my HDD so I found one not used VM named "Windows XP" which had only 5GB. I deleted it as fast as possible :-) and of course I used shift to not use "Recycle bin". Now when I want to run my XP VM I have following error: "One of the parent hard disks of ... is missing." It's not a problem for me as soon as I can restore files from this differential vhd that I have right now. So: I have differential disk with files I need I don't have parent disk My question is: How can I restore files from this differential hvd?

    Read the article

  • Tracking down random BSOD on windows 7

    - by pehrs
    I have gotten a computer running windows 7 handed to me that randomly, several times a day, bsods with a PAGE_FAULT_IN_NONPAGED_AREA (50) or WHEA_UNCORRECTABLE_ERROR (124). Crashes happens regardless of load. I am running out of ideas for how to track this down. Analyzing the minidumps shows the crash to be in ntkrnlmp.exe/WMIADAP.exe System has plenty of power (600w) Ram checks out fine using memtest86+ over a weekend. System is clean inside. No dust build up. Temperatures stay low. As far as I know (and reliability history shows) no new drivers were installed for several months before the problems started. All drivers are now up to date. sfc /scannow reports the system as clean. CHKDSK reports the disks as clean Removing the AV (Avast) has no effect. Any more things that should be tried on windows 7 before I start replacing the hardware?

    Read the article

  • Provision storage in SAN encironment

    - by wildchild
    hi,.. Can somebody help in understanding how Lun Provisioning is done in clariion based on client requirement. Say, a client needs one 50 GB space on the host( for application) ,two -350 GBs ( for DB and stuff) on the same host and i have 4 raid groups with space of 200 GB in one 50 GB in second and 400 GB and 400GB in rest two all having 5 disks. And , I 'm using Raid 5 only. How do i provision keeping performance in mind( so that performance hit is not there)?..And i need to understand the concept of meta head as well. Please help me by elaborating the above scenario..I am learning to provision storage in non productive environment( b'fore going ahead and working on client prod server) and i have been learning a lot from SF ...I request the seniors here to help me understand it better. Thanks for reading

    Read the article

  • Home server - HP Proliant Microserver - Software and setup - OS on USB stick? [closed]

    - by Lloyd Watkin
    I've just purchased a HP ProLiant Microserver for home use. I want to set up with web server, samba shares, the usual stuff. My question is really about system setup. It has an internal USB socket so I've attempted to install a copy of Fedora 14 onto it. I turned off X/Gnome, but it still ran like a pig. I've now put the OS on one of the internal disks (250Gb, 7200rpm), but I was wondering if there was a way to utilise the internal USB to give me better power-saving allowing the hard drives to be shut down when not in use. How would you set this server up? I'd rather not go to the extra cost of an SSD right now, but if that's the best way then so be it.

    Read the article

  • VMWare Server lck file keeps coming back

    - by muncherelli
    I am running VMWare Server 2.0 on a Debian Lenny system as a host OS. I am getting this error when I try to start a Virtual Machine Cannot open the disk '/var/lib/vmware/Virtual Machines//.vmdk' or one of the snapshot disks it depends on. Reason: Failed to lock the file. So I looked around on the web and found that I need to delete the .lck folder and file in order to get this error This seems to happen any time I reboot my Debian Server. The Virtual Machines sometimes do not recover and this lck file is causing problems. Should I create a cron script that does a rm *.lck on each of my machines on reboot? Looking for any direction on how to resolve this. It seems when i do a "reboot" command it is maybe not gracefully shutting down the VMware containers so the lock files are still intact?

    Read the article

  • XenServer migrate machines between hosts

    - by Hubert Kario
    I have a XenServer 5.6 Free setup with 5 VMs (Windows and Linux) using about 1.5TB of directly attached storage. Because our virtualisation needs have grown a bit, we currently are preparing a faster XenServer 6.0 Free machine with more RAM and a more storage. Again, directly attached disks. How can I migrate the VMs between XenServer machines? I don't need to keep the machines up and running during migration, but using VM export and import would definitely take too long. Would making a VM with the same configuration on new host and dd'ing the LVM volume over network be the only quick and least painful solution? Are there any "gotchas" I should look out for when doing something like this? The old machine has an AMD Phenom II, the new has Intel Xeon E5 CPUs.

    Read the article

  • Create XFS volume on /dev/sg* device

    - by cpt.Buggy
    Now I have couple of Supermicro 24x2Tb SATA servers and I have now idea how to get access to disks. I need to create XFS volume on each of them but really don't know how to do it, because fdisk doesn't see them. # sg_scan -i /dev/sg0: scsi0 channel=0 id=0 lun=0 [em] ATA ST3250318AS CC38 [rmb=0 cmdq=0 pqual=0 pdev=0x0] /dev/sg1: scsi1 channel=0 id=0 lun=0 [em] ATA ST3250318AS CC38 [rmb=0 cmdq=0 pqual=0 pdev=0x0] /dev/sg2: scsi6 channel=1 id=8 lun=0 [em] Hitachi HDS722020ALA330 JKAO [rmb=0 cmdq=1 pqual=1 pdev=0x0] ... ... ... /dev/sg25: scsi6 channel=1 id=31 lun=0 [em] Hitachi HDS722020ALA330 JKAO [rmb=0 cmdq=1 pqual=1 pdev=0x0] /dev/sg26: scsi6 channel=3 id=0 lun=0 [em] LSILOGIC SASX36 A.1 7017 [rmb=0 cmdq=1 pqual=0 pdev=0xd] # sg_map /dev/sg0 /dev/sda /dev/sg1 /dev/sdb /dev/sg2 .. ... ... /dev/sg25 /dev/sg26 I can't use fdisk and mkfs, what should I do?

    Read the article

  • Cannot find the 2nd datastore after upgrading ESXi 3.5

    - by aXqd
    I have an ESXi server (version 3.5) with about 60 VMs. It has 2 hard disks, each of which is regarded as a datastore. After upgrading through 'VMware Infrastructure Update' tool(still staying with 3.5 instead of 4.0) and a reboot, I can only see the 1st datastore. Hence many VMs are, now, inaccessible. I wonder how I can get the 2nd datastore back. I am sorry, but I did't have the 2nd datastore backuped before. BTW, I am still thinking of upgrading directly to version 4.0 to see if it can fix the driver problem. How about that?

    Read the article

  • Checking whether product key will work with SBS 2003

    - by Rob Nicholson
    We've recently absorbed a small company who had a Dell PowerEdge server running SBS 2003. For some reason, the hard disks have been wiped. We have the product key though from the sticker on the side of the case but not the installation media: Win SBS Std 2003 1-2 CPU 5-CAL OEM software We do have a Dell labelled set of four CDs labelled SBS 2003 in our store and I've built a VM from this media but it doesn't prompt for the product key during install. Is there any way to ascertain whether this media will work with this product key without going through activation? I know one can activate several times but would prefer to check we've got the right media before doing this. Thanks, Rob.

    Read the article

  • Using off-the-shelf hardware for brand-name servers; Possible? Good idea?

    - by threecheeseopera
    Is it possible or advisable to use 'regular' not-sanctioned-by-the-server-manufacturer hardware in high end servers? Often these manufacturer-supplied parts have a very high price markup, and I wonder if it's always necessary (understanding that they probably apply more rigorous requirements to this hardware). For example, Dell sells 300GB 15,000rpm serial-attached scsi drives for a certain server family for almost $600 each, while newegg sells a drive with the same specs for almost half the price http://www.newegg.com/Product/Product.aspx?Item=N82E16822116059. Do we really need to pay these high markups, especially for disks that are likely RAID-ed and so guarded against catastrophic failure?

    Read the article

  • MSA20 RAID5 recovery failure due to URE on another disk

    - by Andrey
    I have MSA20 with one disk array on 12 disks and 3 LUNs on it (each raid 5). A few days ago one disk in one of the LUNs was failed and I replaced it. But raid5 recovering failed at 13% and I see in ADU report that one of the disk has "Errors Logged = 5566" and according SCSI specifications it is URE (Sense Code=0x11, Qualifier=0x00). In serial log I also see URE error. It seems that Raid5 can't be rebuilt because of this. So I have a few questions: Is there a way to recover raid5 still? If I leave new disk that was replaced and remove disk with URE, will other LUNs be destroyed or just failed LUN? If all LUNs will fail what is the sense to make each LUN with own raid on one disk group array if 2 failed disk can destroy all? As I understand the preferred way is to create one disk array for one LUN in future and not one array with few LUNs? Thanks.

    Read the article

  • Losing partitions after every reboot

    - by Winston Smith
    I have an Acer laptop with one hard disk, which up until yesterday had 4 partitions: Recovery Partition (13GB) C: (140GB) D: (130GB) OEM Partition (10GB) I read that the OEM partition has all the stuff needed to restore the laptop to the factory settings, but since I'd already created restore disks and I needed the space, I wanted to get rid of it. Yesterday, I used diskpart to do that. In diskpart, I selected the OEM partition and issued the delete partition override command which removed it. Then I extended the D: partition into the unused space using windows disk management. Everything worked fine, until I rebooted my laptop, at which point the D: drive vanished. Looking in windows disk management again, I can see that there's an OEM partition of 140GB, which is obviously my D: drive. So I used EASEUS Partition Master and assigned a drive letter to the 'OEM' partition and I was able to access my files again. However, every time I reboot, it reverts back. How do I fix this permanently?

    Read the article

  • Too much free space on FreeNAS - ZFS

    - by Guillaume
    I have a FreeNAS server with 3 x 2 To disks in raidz1. I would expect to have about 4 To of space available. When I run zpool list I get: [root@freenas] ~# zpool list NAME SIZE USED AVAIL CAP HEALTH ALTROOT main_volume 5.44T 3.95T 1.49T 72% ONLINE /mnt I was expecting a size of 4 To. Also, used space as reported by zpool list does not match what's reported by du: [root@freenas] ~# du -sh /mnt/main_volume/ 2.6T /mnt/main_volume/ There are quite a few things that I dont yet completely understand about ZFS. But at the moment I am mostly worried that I misconfigured my system and that I dont have any storage redundancy. How can I make sure I did not do an horrible mistake ... For the sake of completeness, here is the output of zpool status: [root@freenas] ~# zpool status pool: main_volume state: ONLINE scrub: none requested config: NAME STATE READ WRITE CKSUM main_volume ONLINE 0 0 0 raidz1 ONLINE 0 0 0 gptid/d8584e45-5b8a-11d9-b9ea-5404a6630115 ONLINE 0 0 0 gptid/d8f7df30-5b8a-11d9-b9ea-5404a6630115 ONLINE 0 0 0 gptid/d9877cc3-5b8a-11d9-b9ea-5404a6630115 ONLINE 0 0 0 errors: No known data errors

    Read the article

  • How to Mirror or Clone a Spanned Volume in Windows 2008

    - by Matt
    I have a spanned volume (3x6+ TB disks spanned to one 20+ TB volume) that I need to mirror or clone to a new 20+ TB (unspanned) volume. Once mirrored or cloned I'm going to destroy the original volume and reuse the storage elsewhere. Windows 2008 will not allow me to mirror it because the original is a spanned volume. I cannot simply copy the data, because there are sparse files on the volume. So the OS thinks there is 150+ TB used on the disk when there really is only around 18TB used physically. When I try to use the copy command it won't run because it thinks the destination volume needs to be 150+ TB to hold it all. A conundrum, but I figure someone here has the answer. Thanks, Matt

    Read the article

  • How I disable "Safely remove hardware" in Windows 8?

    - by DarkGhostHunter
    I have a Marvell 91XX and I just updated to Windows 8. The problem I have with the latest drivers 1.0.2.1027 is the absence of "Policies" tab inside the Properties in the Device Manager, where I could disable de "Safely Remove Hardware". It was in Windows 7, but in the new version is not, so the OS shows my two hard disks has removable hardware and I can't do anything about it. Is gone forever? Is in another part? Or is not supported? PD: The best I can come up for a fix is to roll back to Windows 7, see if the option changes some regedit value, export, update to Windows 8 and import.

    Read the article

  • Solution for storing sata drives outside of case

    - by Jeffrey Kevin Pry
    I have a system that has 8 sata disks in a software raid 5 array using mdadm. My issue is that I want to move the drives from inside of the computer case in order to cool more efficiently. I have looked all over the web and only seem to find enclosures that hide the drives connectors behind an estata port or some other internal raid controller. Basically what I want is an enclosure or equivalent that I can run independent sata cables to and either power as well, or have it have its own power supply. I have the sata ports on the motherboard available and don't want to limit io by using one port with a multiplier or the like. One final caveat, I am a college student on a budget and don't have a fortune to spend on such an enclosure. Thanks in advance for your help and advice.

    Read the article

< Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >