Search Results

Search found 1362 results on 55 pages for 'mini how tos'.

Page 45/55 | < Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >

  • Audio card with built-in ground isolator?

    - by Dave Jarvis
    What audio cards would you recommend that eliminate hum, and hard-drive & mouse movement signal interference? Hardware components: Motherboard. Asus P5Q SE Audio. Realtek ALC 1200, 8-Channel High-Definition Audio CODEC (on board) Harddrive. WD Caviar 320 GB Mouse. Logitech Marbleman USB Mixer. Mackie d.4 Pro Amplifier. Sonance Sonamp 260 All components are plugged into the same Monster Power HDP 910 powerbar (does not help eliminate noise). I have no other components plugged in. The computer uses a Monster iCable 1000 to go from mini (on board audio) to RCA (mixer). I have moved the cable as far from other cables as possible. A ground loop isolator between the mixer and on board audio eliminates all noise. I would rather not use a ground loop isolator; an internal audio card that is Linux-compatible (Kubuntu) would be ideal. Suggestions?

    Read the article

  • With Ubuntu 9.10, my DVD keeps spinning up

    - by Ken
    I have Ubuntu 9.10 on my Intel Mac Mini. When there's a DVD in the drive, and even if there's no program open at all (just looking at the desktop), every minute or so the disc spins up with a loud whirring noise, and I can hear it cranking the motor to seek across the disc. How do I find out what's causing this? And how can I make it stop? Thanks! EDIT: I straced nautilus, and saw nothing it's doing directly, even when the disc spins up. It does poll inotify regularly, but I don't know how to trace what it's watching, or if that's even how it receives disc-inserted notifications. It doesn't call inotify_add_watch when I insert a disc or mount it (or eject or umount), but it could be watching all of /dev already or something like that. Of course, a DVD is mounted read-only, so whether it's inotify or something else, it should never need to poll anything on that. And if it is inotify, it's happening in the kernel, and the kernel should really never need to poll a device it's mounted to check for notifications.

    Read the article

  • Virtual host config issues in osx 10.7 server app

    - by Benno
    I have two mac mini lion servers setup to run as production and staging machines. My sysadmin decided on these machines over the previous CentOS we had because it had an "interface" to be able to manage it, rather than just the terminal. To be honest, I prefer the terminal. My problem is, the mac osx 10.7 server.app seems to be having issues with the creation of virtual hosts in the 'Web' section. It seems VERY touchy. For example, I cannot create a http virtual host first. I have to create a https host first with a unique dns name 9e..g vuly6), then create the http host with a different dns name to the first (e.g. www), or it appears to override it the first one, even though one is ssl and one is non-ssl. Further, it seems to override perfectly good configurations at random. For example, the default sites directory is usually /Users/default/Sites/Customsites or something, but sometimes when I load the server.app it changes to /var/empty. Also, if I change or add extra virtual hosts after the first one or two, it starts to mess up and the first two virtual hosts start having issues. Has anyone had any experience with setting up virtual hosts via this app? Am I able to manually create these virtual hosts, without using the app, and without the app overriding my settings when I restart apache?

    Read the article

  • Something very strange with network

    - by Rodnower
    Hello, I have Windows 7 and I have very strange thing with my network. Some time I was connected through wireless router and my IP was 192.168.2.103, router's IP was 192.168.2.1 and some other IP was 192.168.2.100. The last I get from page "active DHCP clients" of web interface of the router and from "wireless clients" I may to see that 192.168.2.100 not (!) belong to my MAC address. Router build by EDimax. So after that I disabled wireless function of the router and restarted it. In this time I had not ping to 192.168.2.1. Also I had not any other connection, not wireless nor cable, but (!) I still had ping to 192.168.2.100 and I not understand what this voodoo is... C:\Users\Andrey>ping 192.168.2.100 Pinging 192.168.2.100 with 32 bytes of data: Reply from 192.168.2.100: bytes=32 time<1ms TTL=128 Reply from 192.168.2.100: bytes=32 time<1ms TTL=128 Reply from 192.168.2.100: bytes=32 time<1ms TTL=128 Reply from 192.168.2.100: bytes=32 time<1ms TTL=128 Ping statistics for 192.168.2.100: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms This is what I had: C:\Users\Andrey>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : Andrey-PC Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Wireless LAN adapter Wireless Network Connection 3: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter #2 Physical Address. . . . . . . . . : 06-1D-7D-40-61-EB DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Wireless LAN adapter Wireless Network Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Gigabyte GN-WS50G (mini) PCI-E WLAN Card Physical Address. . . . . . . . . : 00-1D-7D-40-61-EB DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller Physical Address. . . . . . . . . : 00-1B-24-B6-09-91 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes C:\Users\Andrey>arp -a -v Interface: 127.0.0.1 --- 0x1 Internet Address Physical Address Type 224.0.0.22 static 239.255.255.250 static Interface: 0.0.0.0 --- 0xffffffff Internet Address Physical Address Type 192.168.2.1 00-0e-2e-d2-8c-af invalid 192.168.2.255 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.252 01-00-5e-00-00-fc static 239.255.255.250 01-00-5e-7f-ff-fa static 255.255.255.255 ff-ff-ff-ff-ff-ff static Interface: 0.0.0.0 --- 0xffffffff Internet Address Physical Address Type 192.168.2.1 00-0e-2e-ff-f1-f6 dynamic 192.168.2.101 00-27-19-bc-8b-9c dynamic 192.168.2.102 00-16-e6-6c-ae-d4 dynamic 192.168.2.255 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.252 01-00-5e-00-00-fc static 239.255.255.250 01-00-5e-7f-ff-fa static 255.255.255.255 ff-ff-ff-ff-ff-ff static Interface: 0.0.0.0 --- 0xffffffff Internet Address Physical Address Type 224.0.0.22 01-00-5e-00-00-16 static 255.255.255.255 ff-ff-ff-ff-ff-ff static C:\Users\Andrey>route print =========================================================================== Interface List 14...06 1d 7d 40 61 eb ......Microsoft Virtual WiFi Miniport Adapter #2 13...00 1d 7d 40 61 eb ......Gigabyte GN-WS50G (mini) PCI-E WLAN Card 11...00 1b 24 b6 09 91 ......Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller 1...........................Software Loopback Interface 1 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 1 306 ff00::/8 On-link =========================================================================== Persistent Routes: None Only after reboot I lost ping to there: C:\Users\Andrey>ping 192.168.2.100 Pinging 192.168.2.100 with 32 bytes of data: PING: transmit failed. General failure. PING: transmit failed. General failure. PING: transmit failed. General failure. PING: transmit failed. General failure. Ping statistics for 192.168.2.100: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), So what this mysterious cache is? Thank you for ahead.

    Read the article

  • How to use Python to read the physical address(MAC ID) [closed]

    - by getjoefree
    I want to read the physical address of the NIC model, i can get the results that i want to with SED.EXE before, but SED.EXE does not support my environment but Python ok, who have the means to do it. The general situation (not plug the network cable, it is impossible to obtain IP address): Ethernet adapter: Connection-specific DNS Suffix.: Chianet Description ...........: Marvell Yukon 88E8040 PCI-E Fast Ethernet Controller Physical Address .........: A4-BA-DB-9D-1E-8E Dhcp Enabled ...........: Yes Autoconfiguration Enabled ....: Yes Ethernet adapter 3: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Dell Wireless 1510 Wireless-N WLAN Mini-Card Physical Address. . . . . . . . . : 00-23-4D-D9-C0-28 The description of the NIC different, we can use this to fetch the corresponding physical address, base on Physical Address does not work, because the computer with the WLAN Card, I want to use Python to read my computer the card information and after Python handles an output file, output file format: SET MAC = A4BADB9D1E8E and sed format: ipconfig -all|sed -nrf getmac.sed | sed -e "s/-//g" > WINMAC.BAT getmac.sed: /Marvell Yukon 88E8040/ { n; s/.*: ([-0-9A-F]+)/set winmac=\1/p; }

    Read the article

  • How to install DBD::mysql on OS X Server 10.6?

    - by Zoran Simic
    Trying to install DBD::mysql on OS X Server 10.6 (mac mini server). But I'm missing the mysql headers apparently. Since mysql is already part of OS X Server 10.6, I would like to NOT install anything else (no fink or darwin ports installs), just whatever's needed to get DBD::mysql installed and working. Do you know how I could do that? Do I have to install the headers somewhere? And if so, where? (again: I don't want to install another version of mysql on the box, want to use the version it came with). Is there a way to install DBD::mysql without compiling any C files? This is the error I get (the actual error is much longer, but these are the most meaningful bits, this is the first error reported). Checking if your kit is complete... Looks good Unrecognized argument in LIBS ignored: '-pipe' Note (probably harmless): No library found for -lmysqlclient Multiple copies of Driver.xst found in: /Library/Perl/5.10.0/darwin-thread-multi-2level/auto/DBI/ /System/Library/Perl/Extras/5.10.0/darwin-thread-multi-2level/auto/DBI/ at Makefile.PL line 907 Using DBI 1.611 (for perl 5.010000 on darwin-thread-multi-2level) installed in /Library/Perl/5.10.0/darwin-thread-multi-2level/auto/DBI/ Writing Makefile for DBD::mysql cp lib/DBD/mysql.pm blib/lib/DBD/mysql.pm cp lib/DBD/mysql/GetInfo.pm blib/lib/DBD/mysql/GetInfo.pm cp lib/DBD/mysql/INSTALL.pod blib/lib/DBD/mysql/INSTALL.pod cp lib/Bundle/DBD/mysql.pm blib/lib/Bundle/DBD/mysql.pm gcc-4.2 -c -I/Library/Perl/5.10.0/darwin-thread-multi-2level/auto/DBI -I/usr/include -fno-omit-frame-pointer -pipe -D_P1003_1B_VISIBLE -DSIGNAL_WITH_VIO_CLOSE -DSIGNALS_DONT_BREAK_READ -DIGNORE_SIGHUP_SIGQUIT -DDBD_MYSQL_INSERT_ID_IS_GOOD -g -arch x86_64 -arch i386 -arch ppc -g -pipe -fno-common -DPERL_DARWIN -fno-strict-aliasing -I/usr/local/include -Os -DVERSION=\"4.014\" -DXS_VERSION=\"4.014\" "-I/System/Library/Perl/5.10.0/darwin-thread-multi-2level/CORE" dbdimp.c In file included from dbdimp.c:20: dbdimp.h:22:49: error: mysql.h: No such file or directory dbdimp.h:23:45: error: mysqld_error.h: No such file or directory dbdimp.h:25:49: error: errmsg.h: No such file or directory

    Read the article

  • DD-WRT (WRT54G) and (THOMSON TG782) how to put them togather?

    - by FeRtoll
    Ok so let me explain, i bought WRT54G and successfully installed DD-WRT v24-sp1 (07/26/08) mini-special - build 9994. That's all ok no problems with it all normal functioning. And just to add (i don't need wireless, wireless is turned off always) What i want: ISP's router (TG782) from it's INTERNET port(out) cable "which was before in my pc" is connected to WRT54G's INTERNET port and then from WRT54G LAN port 1 to my pc. The problem: How do i connect and setup all? I have tried many times on many different ways but cant get it to work IF THE CABLE FROM TG782 IS CONNECTED TO WRT54G ON INTERNET PORT. If i connect the TG782 to Lan port 1 on WRT54G and my pc to lan port 2 then all works fine after i setup gateway and all. But i want to connect TG782 to Internet port of WRT54G because i need "Access Restrictions" and this only goes through WAN right? please correct me if i am wrong. What i have tried: This is how i have tried to setup all. The TG782 router ip is 192.168.1.1 And WRT54G ip is 192.168.1.30 so in WRT54G control panel i have setup like this: ----WAN Connection Type---- Connection Type: Automatic Configuration - DHCP STP: Disabled ----Router IP---- Local IP Address: 192.168.1.30 Subnet Mask: 255.255.255.0 Gateway: 192.168.1.1 (the TG782) ----Network Address Server Settings (DHCP)---- DHCP Type: DHCP Server Start IP Address: 192.168.1.100 Maximum DHCP Users: 6 And this wont work i probably miss something more, if anyone can help i would be thankfull. Also i have to note that i have tried to set my network adapter on pc to use the gateway of WRT54G and ip 192.168.1.102 In short: i cant get it to work normal only as a switch! Thanks for any help! -------EDIT:------- Here is an image which maybe can help: http://img27.imageshack.us/img27/4227/allin1w.jpg

    Read the article

  • WinDbg Problem with ntoskrnl

    - by Wilf
    I've got a similar problem to "BSOD - Unable to verify timestamp for ntoskrnl.exe", in that I can't seem to get the correct symbols to read ntoskrnl. I've followed the advice given by BK1E, but still can't get a result. Text from debug below: Loading Dump File [C:\Users\XXXX\AppData\Local\Temp\WER9D78.tmp\Mini030610-01.dmp] Mini Kernel Dump File: Only registers and stack trace are available Symbol search path is: SRV*c:\Windows\Symbols*http://msdl.microsoft.com/download/symbols Executable search path is: Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2 *** WARNING: Unable to verify timestamp for ntoskrnl.exe *** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack 2) MP (4 procs) Free x64 Product: WinNt, suite: TerminalServer SingleUserTS Personal Machine Name: Kernel base = 0xfffff800`01e59000 PsLoadedModuleList = 0xfffff800`0201ddd0 Debug session time: Sat Mar 6 14:08:20.516 2010 (UTC + 0:00) System Uptime: 0 days 0:42:01.723 Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2 *** WARNING: Unable to verify timestamp for ntoskrnl.exe *** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe Loading Kernel Symbols ............................................................... ................................................................ ......................... Loading User Symbols Loading unloaded module list .... ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck A, {11, c, 0, fffff80001ec9489} ***** Kernel symbols are WRONG. Please fix symbols to do analysis. How do I fix this issue? OS is Windows Vista x64 SP2.

    Read the article

  • What Wireless Router/ADSL Modem to get? N-band a must!!

    - by JJarava
    I'm looking for a Dual-N band Router OR ADSL Gateway and I'd like some recommendations. Situation: I have a 802.11b/g ADSL gateway provided by my telco, but the WIFI signal won't cover all the house (especially the living-room, so my tv-connected Mac Mini has poor to no internet access). So I'm looking to either replace the DSL modem with a N-enabled one, or to add a Router to the mix. I've had a modem+router setup for many years, and I know the advantatges (double NAT, double FW = more security) and issues (more complex to troubleshoot, two possible points of failure), so I'd rather live with a single (ADSL Gateway) device, if possible. Requirements: Dual-N Band (300 Mbs WIFI) 1 GB Ethernet ports ADSL2+ support (if it's a ADSL gateway, which would be desirable) "Best" range and speed possible Nice to have: USB port to share disks/printers on the network Media streaming I've been a long time user of Linksys, so googling around I found the WRT610N (http://www.linksysbycisco.com/US/en/products/WRT610N) for a "Pure Router" perspective, and it's one of those that Linksys styles "N++" (http://www.linksysbycisco.com/US/en/promo/Promotion-Go-Wireless?stepname=Promotion-Step-Go-Wireless-High-Performance) But I haven't been able to find similar "ADSL" gateways. I've found the WAG320N, but there is little to no info in the Linksys site (i.e., i don't know if it's Dual Band, or if it has GB ethernet) Any opinions/recommendations of other products/suggestions are more than welcome.

    Read the article

  • How do I keep my Mac from constantly going to sleep?

    - by David
    The system is a PowerPC Mac Mini running MacOS Tiger 10.4.11. When I login (I'm the admin), everything seems fine - until about 10-15 minutes later. Then the system goes into sleep mode. Each time I try to wake the system up - I can barely log in before it goes to sleep again. Sometimes I don't have enough time to enter my password (from the screen saver). If I shut down and restart, then I have that 10-15 mins again - until it again goes to sleep. I checked the settings in the Displays and Energy System Prefs. I looked at Accounts and at Screen Saver System Prefs; no times seemed to be present. I've already reset the PROM and other things (as part of an earlier problem shooting session). If I don't log in at the desktop, things seem to be fine. Nothing in .profile, /etc/profile, or /etc/bashrc seems to stand out. Right now, the system is hardly usable; can someone help? Many thanks...

    Read the article

  • How do I keep my Mac from constantly going to sleep?

    - by David
    The system is a PowerPC Mac Mini running MacOS Tiger 10.4.11. When I login (I'm the admin), everything seems fine - until about 10-15 minutes later. Then the system goes into sleep mode. Each time I try to wake the system up - I can barely log in before it goes to sleep again. Sometimes I don't have enough time to enter my password (from the screen saver). If I shut down and restart, then I have that 10-15 mins again - until it again goes to sleep. I checked the settings in the Displays and Energy System Prefs. I looked at Accounts and at Screen Saver System Prefs; no times seemed to be present. I've already reset the PROM and other things (as part of an earlier problem shooting session). If I don't log in at the desktop, things seem to be fine. Nothing in .profile, /etc/profile, or /etc/bashrc seems to stand out. Right now, the system is hardly usable; can someone help? Many thanks...

    Read the article

  • Change Laptop Wireless Card?

    - by Craig
    I have just bought a new Samsung RV511 Laptop (the i5 Version). Anyway it comes installed with a Broadcom Wifi Card, I have a Super Atheros Mini Wifi Card that I would like to swap for the Broadcom one. I use Atheros for security auditing purposes in Linux that the Broadcom one is not good for. Trouble is I have never got to the barebones of a laptop, although I am a Custom PC Builder, laptops i generally have no concern for. Take a look at this picture, I took one back panel off to reveal some of the components: I believe the Wireless Card is where I marked the arrow pointing too. That little white square thing appears to be a sticker of the Wifi card, it says WLAN. How can I access it to swap it with my Atheros one. Do I need to remove all the outermost screws? There are screws located to the right of where I scribbled in Yellow and next to the HDD, do I just remove those? I dont want to destroy the machine, only just got it today. Appreciate some help thanks.

    Read the article

  • Regular Windows 7 BSOD with Shrew VPN client

    - by Junto
    The Shrew VPN client appears to be a good alternative to the Cisco VPN Client on x64 Windows 7. However, since installing it I've seen fairly regular BSODs. Minidump attached: Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64 Copyright (c) Microsoft Corporation. All rights reserved. Loading Dump File [D:\Temp\020810-23431-01.dmp] Mini Kernel Dump File: Only registers and stack trace are available Symbol search path is: SRV*d:\symbols*http://msdl.microsoft.com/download/symbols Executable search path is: Windows 7 Kernel Version 7600 MP (8 procs) Free x64 Product: WinNt, suite: TerminalServer SingleUserTS Built by: 7600.16385.amd64fre.win7_rtm.090713-1255 Machine Name: Kernel base = 0xfffff800`0285f000 PsLoadedModuleList = 0xfffff800`02a9ce50 Debug session time: Mon Feb 8 18:08:12.887 2010 (GMT+1) System Uptime: 0 days 7:52:06.120 Loading Kernel Symbols ............................................................... ................................................................ .............. Loading User Symbols Loading unloaded module list .... ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck A, {0, 2, 0, fffff800028d50b6} Unable to load image \SystemRoot\system32\DRIVERS\vfilter.sys, Win32 error 0n2 *** WARNING: Unable to verify timestamp for vfilter.sys *** ERROR: Module load completed but symbols could not be loaded for vfilter.sys Probably caused by : vfilter.sys ( vfilter+29a6 ) Followup: MachineOwner Machine is a brand spanking new Dell Precision T5500. Superuser appears to have several recommendations for the Shrew VPN Client as an alternative to the Cisco VPN client on 64 bit machines, so I wondered if anyone here has seen this problem and possibly found a solution to the problem? I've decided to run the VPN client under Windows 7 compatibility mode for the moment (Vista SP2) with administrator privileges to see if it makes a difference. Oddly, the VPN doesn't necessarily need to be connected. I've noticed it when browsing using Google Chrome and Internet Explorer, usually when I open up a new tab. If it carries on I think I'll be forced to shell out the 120 EUR for the NCP Client instead.

    Read the article

  • SQL 2008 SP1 crashing almost daily

    - by matijake
    Hey, almost every day our new DB crashes. It is virtual server residing on same hardware as 5 other servers, two of them beeing identical MS SQL2008sp1 and two Oracle 11g's so I can pretty much rule out hardware issues. Server has dedicated local LUN, 4vCPU and 8GB memory with 2GB windows swap file. It runs 4 instances. Primary instance is limited to 5GB memory and paralelism set to 4 running on MS SQL 2008 SP1 @ Windows Server 2008 Enterprise R2 x64. Only that primary instance is crashing. After it crashes nothing can connect to it, it's even impossible to shut it down through service manager. What I found in logs is: ***Stack Dump being sent to C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\LOG\SQLDump0081.txt SqlDumpExceptionHandler: Process 4788 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server i s terminating this process.     Whole log can be seen at: http://kabl.org/files/SQLDump0081.txt second crash log made second later at: http://kabl.org/files/SQLDump0082.txt I have analyzed mini crashdump with Microsoft tools, but no promising results. If it can help, here it is: http://kabl.org/files/SQLDump0081.mdmp Any ideas are greatly welcome, since it is becoming quite a pain in the ass to restart server almost every day :) Regrads, -Matija

    Read the article

  • How do you use a Mac without a mouse?

    - by NitroxDM
    So I was using my Mac Mini and decided to set the application button on Logic Click mouse to open Exposé. I had this set up at one time and found it useful. So I open the Exposé control panel and took a look at the triggers for Exposé. There is drop down for a secondary trigger. In that drop down there was a ton of mouse buttons 100+. So I selected #32 just to see what button #32 was on my 5 button mouse. Turns out it's all of them! So no matter what button I press guess what happens... I get Exposé. So using the just the keyboard how do I: Change the Exposé trigger? I can use the keyboard to bring up the control Exposé panel but guess what I can't get anything else to come in to focus. Kill Exposé? Right now I can say is D'oh! Any ideas?

    Read the article

  • How can I debug solutions in Visual Studio 2010 from a network share?

    - by alastairs
    I've recently got a new Mac laptop and am running VS2010 in a Parallels virtual machine. It's mostly working out well for me, but I'm having some problems with debugging specific project types, related to the fact that the projects are being accessed via a network share. Test projects don't run because the test runner can't load the tests' DLL. Web projects fail to run in the Visual Studio mini web server, throwing the following exception: 'An error occurred loading a configuration file: Failed to start monitoring changes to path\to\web.config'. I've spent the evening trawling the web with little luck on this. After reading these two posts, I tried out the usual CasPol changes, but then found this post from one of the early VS2010 betas indicating that CasPol is no longer needed/supported in .NET 4.0 and VS2010. The network share is accessible via both a mapped drive and the UNC path. The virtual machine runs its applications under the administrator account, which appears to have all the necessary permissions on the network share to create, read, write and delete files and folders. I say "appears to have" as I can't view the Security Properties of the appropriate folder via Explorer: the Security tab just isn't present. Has anyone managed to successfully load and debug web and test projects from a network share in VS2010?

    Read the article

  • 13" MacBook Pro with Win 7 and External VGA gets 640x480

    - by Jim McKeeth
    I have a brand new 13" MacBook Pro - 2.26 GHz and the NVIDIA 9400M Video card. I installed Windows 7 (final) in boot camp and booted up to Windows 7. Installed all the drivers from the Apple disk and it was working great. Then I attached the external VGA adapter (from apple) to connect to a projector and it dropped down at 640x480 resolution. No matter what I did it wouldn't let me change to a higher resolution if the external VGA was connected. Once it disconnects then it goes back to the normal resolution. If I am booted into Snow Leopard it works fine. I tried updating the NVIDIA drivers and it behaved exactly the same. Ultimately I want to get 1024x768 or better resolution when connected to an external display. If it isn't fixable then I am curious if anyone else has seen this, if it is a known issue, and who to contact for support (Apple, Microsoft or NVIDIA?) Update: Just attaching the Mini-DVI to VGA adapter kicks it into 640x480, no projector is required. I tried forcing the display driver from Generic PnP Monitor to one that supported 1024x768 and that didn't work either.

    Read the article

  • How to fix display on external Samsung Syncmaster shifted to the right when connected to Macbook Pro?

    - by joe larson
    Is there something special I need to do to be able to use external LCD displays with my new MacBook Pro? Do I need extra software, or do I possibly need a different cable? I'm attempting to use an external display with my MBP. I've got a "Mini DisplayPort to VGA Female Adapter for Mac", plugged into the thunderbolt port on my MBP, which I understood should be compatible with thunderbolt. I've tried this with three different SyncMaster models: a B2330 (21.5"), a EX2220 (22"), and a third (also 22" ish) which I don't have the model # for -- but all are 1920x1080 resolution; plus an additional HP monitor of similar size and resolution. In all four cases, the MBP recognizes the screen and choses the correct resolution. However, the display is shifted over about 1 inch. This is true no matter if I change screen resolutions also. The controls on the monitor for horizontal position don't help. Also, sometimes (especially if I drag an app over into the second screen), the screen starts skipping left to right and having bands of fuzz. Additionally, the monitor will periodically blink off for a moment, trying to switch from Digital to Analog and back (the Syncmaster shows text on the screen to tell you it's trying to do this). Often when it comes back from one of these blank-outs, it will show OK (no skipping or fuzz) but still shifted right; then after a few seconds it will go wrong again skipping and fuzzy. This photo shows the worst of it. I've added red rectangles to show the physical edge of the screen, and a yellow rectangle to show the empty space on the left of the screen. (Sorry for the awful quality and lighting!) Also, it's worth noting I am on Mac OS X 10.6.7, and yes I have this update 1.4 installed.

    Read the article

  • NetInstall working on some systems, not working on others

    - by cduruk
    Hi, I'm having an issue where my NetInstall setup works on some computers and fails on others. I am not able to diagnose the issue. I created an image of a Mac Mini and then created a NetRestore image using the System Image Utility found on Snow Leopard Server. NetBoot and NFS all seem to be working fine on the server, which is an XServe. Then I select the NetInstall image from the Startup Disk on a machine. On some of the machines, the process works as expected. On some of them, I see the globe icon blink a few times and then the system boots to the regular hard drive. I have captured the tracedump and the system.log logs from the server on both cases where NetInstall seems to work and fail. Here is the link that has all the logs http://gist.github.com/232232 The gist of the failure seems to be from the lack of BSDP DISCOVER in the failure but I'm not able to identify why that exactly is happening. I'd really appreciate any help on this issue.

    Read the article

  • What is the best VM for developing WPF apps from within OS X?

    - by MarqueIV
    All of my machines are Macs (Mac Pro, MacBook Pro, MacBook Air and Mac Mini (and Apple TV 2.0 too! :) ) but for my day-job, I develop .NET/WPF applications. Normally I just boot into Boot Camp and develop that way, which of course works great, but there are times when I need to simultaneously get to things on my Mac-side of the equation, so I've bought both VMware 3.1 and Parallels 6. Both work, however, even on my Mac Pro where I paid to upgrade to the better video cards (the NVidia 8600s I think vs. the stock ATI cards) the WPF performance bites!! Now this confuses me since both boast that they support not only hardware-accelerated OpenGL 2.1, but also hardware-accelerated DirectX 9 (VMware even allegedly supports DirectX 10!) via their respective virtual drivers and both can run 3D games just fine, even in a window. But even the simple act of resizing a WPF window that has a tiled background results in some HIDEOUS repainting and resizing behaviors. It's damn near closer to what you'd expect over RDP let alone a software-only renderer (forget accelerated hardware completely!) So... can anyone please tell me WTF WPF is doing differently? More importantly, how can I speed up the WPF performance? Should I switch to VirtualBox that also has support for DirectX? Or am I just gonna have to 'byte' the bullet (sorry... had to. So I like puns! Thank Jon Stewart!) and continue using Boot Camp?

    Read the article

  • Ways to have audio output without wires

    - by viraptor
    I'm trying to find a way of using my home speakers/amp without actually having to connect them. There are two laptops that use them normally (so I don't like changing the connection all the time) and I'd rather move the speakers to a place that's away from the couch. I'm not sure how to do this though... The options I can think of are: some kind of wireless jack-jack connection finally getting a media server Unfortunately I can't find any good product for the first solution. I've seen some headphones which have the receiver integrated and a separate transmitted, so in general the idea is already out there, just not the way I need ;) I've seen also http://www.miccus.com/products/blubridge-mini-jack, but I'd have to have a compatible receiver which I can't find on its own (maybe there's some application that the media server could use?). As far as media server goes... many of the plug servers look really interesting, but I'm not sure how to create an audio output and how to redirect the input really. None of the plug servers I've seen so far advertises the option of audio output jack port. I think this part could be fixed by getting one with an usb port and a separate cheap usb soundcard. I hope that input can be sorted out in some rather simple way. I've got Linux running on both laptops so I hope that would be possible to configure jack/pulse/whatever to use the remote endpoint, or even write a simple local-/dev/dsp:network:media-server-/dev/dsp forwarder. So the main question is... are there better ways? Are there any out of the box solutions? Or maybe this was already done by someone and described somewhere?

    Read the article

  • Windows Error Reporting and IIS7 on Windows Server 2008

    - by graffic
    In a windows webservere I'm trying to get a memory dump of a failing IIS 7 worker process (w3wp.exe) with no avail. In the Event Viewer I get the following. Faulting application name: w3wp.exe, version: 7.5.7600.16385, time stamp: 0x4a5bd0eb Faulting module name: clr.dll, version: 4.0.30319.1, time stamp: 0x4ba21eeb Exception code: 0xc00000fd Fault offset: 0x0000000000005c22 Faulting process id: 0x1cac Faulting application start time: 0x01cc23419da54772 Faulting application path: c:\windows\system32\inetsrv\w3wp.exe Faulting module path: C:\Windows\Microsoft.NET\Framework64\v4.0.30319\clr.dll Report Id: b54ec4f8-8fa4-11e0-ab62-005056810035 Even if I've configured LocalDumps for WER, and specifically for w3wp.exe in the registry. I get another event telling me that there is a report here: *C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_w3wp.exe_cdb8af6deb381574fe9fb0dc9aa3edaad59acd5f_cab_4fbf9b53* It contains the following files: WERD931.tmp.appcompat.txt WERDFE9.tmp.WERInternalMetadata.xml WER99EF.tmp.WERDataCollectionFailure.txt The "depressing one" is the WERDataCollectionFailure that says: Heap dump generation failed: 0x8007012b Mini dump generation failed: 0x8007001f After many tries, lots of msdn documentation and many failed google search. I'm out of ideas on how to get a dump here. Does anyone have any suggestion on how to make WER work? Thank you in advance for your time reading this :)

    Read the article

  • Mac OS X Disk Encryption - Automation

    - by jfm429
    I want to setup a Mac Mini server with an external drive that is encrypted. In Finder, I can use the full-disk encryption option. However, for multiple users, this could become tricky. What I want to do is encrypt the external volume, then set things up so that when the machine boots, the disk is unlocked so that all users can access it. Of course permissions need to be maintained, but that goes without saying. What I'm thinking of doing is setting up a root-level launchd script that runs once on boot and unlocks the disk. The encryption keys would probably be stored in root's keychain. So here's my list of concerns: If I store the encryption keys in the system keychain, then the file in /private/var/db/SystemKey could be used to unlock the keychain if an attacker ever gained physical access to the server. this is bad. If I store the encryption keys in my user keychain, I have to manually run the command with my password. This is undesirable. If I run a launchd script with my user credentials, it will run under my user account but won't have access to the keychain, defeating the purpose. If root has a keychain (does it?) then how would it be decrypted? Would it remain locked until the password was entered (like the user keychain) or would it have the same problem as the system keychain, with keys stored on the drive and accessible with physical access? Assuming all of the above works, I've found diskutil coreStorage unlockVolume which seems to be the appropriate command, but the details of where to store the encryption key is the biggest problem. If the system keychain is not secure enough, and user keychains require a password, what's the best option?

    Read the article

  • NSMutableURLRequest and a Password with special Characters won't work

    - by twickl
    I'm writing a small program (using Cocoa Touch), which communicates with a webservice. The code for calling the webservice, is the following: - (IBAction)send:(id)sender { if ([number.text length] > 0) { [[UIApplication sharedApplication] beginIgnoringInteractionEvents]; [activityIndicator startAnimating]; NSString *modded; modded = [self computeNumber]; NSMutableURLRequest *theRequest = [NSMutableURLRequest requestWithURL: [NSURL URLWithString:@"https://tester:%=&[email protected]/RPC2"]]; [theRequest setHTTPMethod:@"POST"]; [theRequest addValue:@"text/xml" forHTTPHeaderField:@"content-type"]; [theRequest setCachePolicy:NSURLCacheStorageNotAllowed]; [theRequest setTimeoutInterval:5.0]; NSString* pStr = [[NSString alloc] initWithFormat:@"<?xml version=\"1.0\" encoding=\"UTF-8\"?><methodCall><methodName>samurai.SessionInitiate</methodName><params><param><value><struct><member><name>LocalUri</name><value><string></string></value></member><member><name>RemoteUri</name><value><string>sip:%@@sipgate.net</string></value></member><member><name>TOS</name><value><string>text</string></value></member><member><name>Content</name><value><string>%@</string></value></member><member><name>Schedule</name><value><string></string></value></member></struct></value></param></params></methodCall>", modded, TextView.text]; NSData* pBody = [pStr dataUsingEncoding:NSUTF8StringEncoding]; [theRequest setHTTPBody:pBody]; NSURLConnection *theConnection = [[NSURLConnection alloc] initWithRequest:theRequest delegate:self]; if (!theConnection) { UIAlertView *alert = [[UIAlertView alloc] initWithTitle:@"Error" message:@"A Connection could not be established!" delegate:nil cancelButtonTitle:@"OK" otherButtonTitles: nil]; [alert show]; [alert release]; sendButton.enabled = TRUE; return; } [pStr release]; [pBody release]; } } The Username and Password have to be in the URL, and it works in most cases, but when the password consists of special characters like in the example "%=&=-Test2009", the Webservice does not respond. If it is something like "Test2009" it works fine. Does anyone have an idea why, and maybe a solution for that?

    Read the article

  • Can't get intel atom g-500 video driver to work with ubuntu 10.10 netbook edition.

    - by Matthew
    First of all I am completely new to Linux, so if you respond, please do so in a 'linux for dummies' tone so that my brain will be able to process it. I recently installed ubuntu on my dell mini-inspiron 1010. It has one GB of ram and an intel atom processor that uses the intel 500 graphic accelerator driver for windows and can run 1024x768 comfortably in xp. When I was installing ubuntu had quite a bit of trouble with my display and I am still unable to adjust my settings from 800x600x0x0 and there is no hardware acceleration. I visited the intel site and installed the linux drivers with the help of a friend but still no change. I tried adding resolution settings through xconf but they could not be applied even after I added the values. I am probably going about this totally wrong, but I've spent quite a lot of time browsing through forums and still haven't found a solution. Any help would be greatly appreciated. Also any other beginner tips that you have would be much appreciated. Thanks in advance, Matt

    Read the article

< Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >