shots fired - Page 45 - Developer IT

New monitor connected to HDMI adaptor doesn't show output after booting

- by Paul

Hello out there in the multiple monitors’ world. I am a very old newbie in your world and need help. I just purchased a new Asus VH236H monitor and hooked it up the HDMI port of an ATI Radeon HD4300 / 4500 Series display adaptor. I left the old Princeton LCD19 (TMDS) hooked up to the DVI port of the same display adaptor. Both monitors displayed the boot sequence, after I fired good old Sarastro2 (Asus P5Q Pro Turbo – Dual Core E5300 – 2.60 GHz) up. The Asus lacked one half of a second behind the Princeton until the Windows 7 Ultimate SP 1 boot up was complete. Then the Asus displayed “HDMI NO SIGNAL” and went into hibernation. The Princeton stayed lit up as before. Both monitors are displayed on the “Screen Resolution Setup Display” and I plaid around with them for a while. The only thing I accomplished was to shove the desktop icons from the Princeton to the still hibernating Asus. The “Multiple displays:” is set to “Extend these displays”, the Orientation is “Landscape” and the Resolutions are set on both to the “recommended” one. Both monitors show that they work properly in the advanced Properties display. What am I doing wrong, what am I missing? Never mind the opinions about the different resolutions of the two monitors. I always can unhook the Princeton and give it to a Goodwill Store if I do not like the setup. I just would like to make it work. Any constructive help is very much appreciated, Thank you. Thank you Anees Bakrain Only the ATI Radeon HD 4300/4500 Series adapter is displayed in the Device Manager, for that reason I have to assume that the onboard display adaptor is not active. All 40 drivers of Sarastro2 are up to date and the HDMI cable can not be the problem because both monitors displayed the boot sequence up to the moment when Windows 7 was loaded completely. This was the moment, when the Asus monitor lost its signal. Both connectors, HDMI and DVI are connected and removing the DVI connector would not solve my problem of running both monitors simultaneously. However, your suggestions shifted my seventy one year old brain into the next gear. The only question remaining is; “Why the signals to the Asus monitor stop after the sequence is complete”. The ATI Radeon HD 4300/4500 Series adapter seems to be capable of sending simultaneous HDMI and DVI signals, what is done during the boot sequence. Why do the signals change after the boot sequence is complete is the key question or der springende Punkt? Is this a correct assumption slhck?

Read the article

Unable to delete all partitions on flash drive using Windows 7 OS??

- by irrational John

Recently I purchased an ADATA C802 8GB flash drive. Since the drive was new I decided to run some of the HD Tune Pro (v4.50) performance tests on it, mostly just for the heck of it. To avoid accidently destroying data HD Tune refuses to write to a drive unless there are no partitions on the drive. If you do attempt to write to a drive with partitions, it posts the message "Writing is disabled. To enable writing please remove all partitions." As you would expect, the ADATA came formatted with a single primary FAT32 partition in the Master Boot Record. But a number of unexpected things happened when I attempted to delete that partition. The first thing I tried was to use the Windows 7 (64-bit) Disk Management tool (diskmgmt.msc) to delete the partition. It would not let me. The context menu choice to delete that volume was not available. Next I opened up a command prompt window with Admin authority and ran diskpart. Diskpart deleted the volume for me. However, when I attempted to run an HD Tune write test on the drive I still got the "Writing is disabled" message. Huh??? So I fired up a utility I have which allows viewing drives at the sector level and verified that the partition table in the Master Boot Record was empty. No partitions. Yet HD Tune still thought there were partitions on the drive? So why was I still getting the "Writing is disabled" message from HD Tune Pro? And why wouldn't the Windows 7 Disk Management tool let me change the partitions on this drive. After doing the above, I plugged the ADATA into my MacBook. I was then able to format it as either a GPT or MBR partitioned drive with no problems. I am not looking for suggestions on how to format this drive. I can do that. What I do not understand and was hoping I might get insight into is why this drive behaves so strangely under Windows 7? And BTW, what's up with HD Tune Pro? BTW, if I plug the drive I formatted on my MacBook back into my Windows 7 64-bit system I still run into road blocks with the Disk Management tool. For example, I cannot delete all the GPT partitions on the ADATA so I can convert it into an MBR drive. I following Microsoft's instructions, the instructions just do not work with this ADATA flash drive. Anyone know what's up with this? It makes no sense to me. Has something changed in Windows 7 (Vista)??

Read the article

Suggestions for splitting server roles amongst Hyper-V virtual servers / RAID6 or RAID10? / AppAssure

- by Anon

We have 2 Hyper-V hosts at present running 1 virtual server that was converted from a physical box running all roles. My plan is to split the roles over various virtual machines, upgrading to the latest software versions as I go, and use the backup server as a standby in case the main server fails. AppAssure backup software has a feature called Virtual Standby, so the VHD's can be ready to be fired up on the backup server if necessary. Off-site backups will be done via external USB drive for now. I'm just seeking some input/suggestions into how I'm planning to split the roles out amongst various virtual servers. Also, I'm curious how to setup the storage on the servers. We do not have any NAS's, SAN'S or any budget for this. What would the best RAID level be to use? I'm thinking either RAID6 (which is currently used) however I'm concerned about the write speeds, or RAID10 but again I'm worried that I can only lose 1 drive (from the same mirror) as opposed to any 2 with RAID6. I realise I have a hot swap for this, but what if a further drive fails during a rebuild? Is the write penalty of RAID6 worth the extra reliability over RAID10? Or will it be too slow with all the roles I am planning, therefore RAID10 is my only real option? The reason for the needed redundancy is I am the only technician and I'm not always on-site. Options I've considered: 1) 5 drives in RAID6 set, 200gb for host OS, rest for VM storage. 1 drive for hot swap - this is how it is currently setup 2) 4 drives in RAID10 set, 200gb for host OS, rest for VM storage. 2 drives for hot swap 3) 4 drives in RAID10 set for VM storage, 2 drives in RAID1 set for host OS. No drives for hot swap - While this is probably the best option with the amount of drives I have, I don't like the idea of having no hot swap 4) 3 drives in RAID6 set for VM storage, 2 drives in RAID1 set for host OS. 1 drive for hot swap All options give us enough storage capacity for our files, etc. We don't have any budget for extra drives or extra hot swap HD chassis for the servers. We have about 70 clients and about 150 users. MAIN SERVER Intel Xeon 5520 @ 2.27 GHz (2 processors) 16GB RAM 6 x 1TB Seagate Barracuda ES.2 Enterprise SATA drives Intel SRCSATAWB RAID controller Virtual machine workload using Hyper-V on Windows Server 2008 R2: DC01 - Active Directory Domain Controller / DNS server / Global catalog - 1GB RAM DC02 - Active Directory Domain Controller / DNS server / Global catalog - 1GB RAM Member Server - DHCP server, File server, Print server - 1GB RAM SCCM Member Server - 4GB RAM Third Party Software Member Server - A/V server, Ticketing software, etc - 4GB RAM Exchange 2007 - 4GB RAM - however we are probably migrating to a hosted solution, therefore freeing up resources BACKUP SERVER Intel Xeon E5410 @ 2.33GHz (2 processors) 16GB RAM 6 x 2TB WD RE4 SATA drives Intel SRCSASRB RAID controller Virtual machine workload using Hyper-V on Windows Server 2008 R2: AppAssure backup software - 8GB RAM

Read the article

Router behind Router--second router (and its clients) cannot be "seen" even after both routers are D

- by Trioke

Couple of terminology I guess I should get out of the way for consistency's sake throughout the post: External Router/Modem - SMC 8014WG - External IP 173.32.144.134 - Internal IP 192.168.0.1 Internal Router - LinkSys WRT120N - "External" IP of 192.168.0.175 - Internal IP 192.168.1.1 - Connected via Ethernet Cable (a really long one, from the basement to the second floor) PC - IP 192.168.200 - Connected Wirelessly via WAP2 Personal. Laptop - Used to try and diagnose the problem, a 4th machine to the setup which won't be part of the final setup once everything works. The actual problem: I've tried setting the LinkySys router as a DMZ'd client on the SMC router, and then DMZ'd the actual PC on the LinkSys. So the DMZ looks like this: On the SMZ, client with IP 192.168.0.175 is DMZ'd. On the LinkSys, client with IP 192.168.1.200 is DMZ'd. No dice. I then tried port forwarding the necessary port on the SMC to the LinkSys (lets just say, port 80). Then port forwarded Port 80 on the LinkSys to the PC. Same as the DMZ scenario above, but change DMZ with port forwarding. No dice, still :(. Now here's where I went stupid--and tell me if one should never do this--I enabled both DMZ and port forwarding at the same time. I fired up Opera--my browser of choice ;)--typed in 173.32.144.134:6333 and... ... Third time is the charm they say? Well, clearly not. Otherwise I wouldn't be here ;). To diagnose the problem, I enabled "Allow remote access to the Admin panel" on the LinkSys router, and specified port 6333 as the port to use. I port forwarded port 6333 on the SMC to 192.168.0.175, and access my external IP of 173.32.144.134:6333 in hopes of seeing the Admin panel... No dice (I think I've ran out of dice by now ;)). So to see where the problem was, I connected a laptop to the SMC via LAN cable, and typed in 192.168.0.175:6333, and viola, Admin Panel access! So the problem looks like it lies with the SMC--But that's as far as I've got, I've done the port forwarding, the DMZ'ing, and I've even disabled the built-in firewall for safe measures, but nothing worked. So, here I am. Unable to connect to the PC behind the Internal router externally, and without anything to go on other than to come here and ask for the wisdom of the the superuser folks :). If any more detail is required, just ask. (Apologies in advance, if questions should never be this long winded!)

Read the article

Microsoft TypeScript : A Typed Superset of JavaScript

- by shiju

JavaScript is gradually becoming a ubiquitous programming language for the web, and the popularity of JavaScript is increasing day by day. Earlier, JavaScript was just a language for browser. But now, we can write JavaScript apps for browser, server and mobile. With the advent of Node.js, you can build scalable, high performance apps on the server with JavaScript. But many developers, especially developers who are working with static type languages, are hating the JavaScript language due to the lack of structuring and the maintainability problems of JavaScript. Microsoft TypeScript is trying to solve some problems of JavaScript when we are building scalable JavaScript apps. Microsoft TypeScript TypeScript is Microsoft's solution for writing scalable JavaScript programs with the help of Static Types, Interfaces, Modules and Classes along with greater tooling support. TypeScript is a typed superset of JavaScript that compiles to plain JavaScript. This would be more productive for developers who are coming from static type languages. You can write scalable JavaScript apps in TypeScript with more productive and more maintainable manner, and later you can compiles to plain JavaScript which will be run on any browser and any OS. TypeScript will work with browser based JavaScript apps and JavaScript apps that following CommonJS specification. You can use TypeScript for building HTML 5 apps, Node.JS apps, WinRT apps. TypeScript is providing better tooling support with Visual Studio, Sublime Text, Vi, Emacs. Microsoft has open sourced its TypeScript languages on CodePlex at http://typescript.codeplex.com/ Install TypeScript You can install TypeScript compiler as a Node.js package via the NPM or you can install as a Visual Studio 2012 plug-in which will enable you better tooling support within the Visual Studio IDE. Since TypeScript is distributed as a Node.JS package, and it can be installed on other OS such as Linux and MacOS. The following command will install TypeScript compiler via an npm package for node.js npm install –g typescript TypeScript provides a Visual Studio 2012 plug-in as MSI file which will install TypeScript and also provides great tooling support within the Visual Studio, that lets the developers to write TypeScript apps with greater productivity and better maintainability. You can download the Visual Studio plug-in from here Building JavaScript apps with TypeScript You can write typed version of JavaScript programs with TypeScript and then compiles it to plain JavaScript code. The beauty of the TypeScript is that it is already JavaScript and normal JavaScript programs are valid TypeScript programs, which means that you can write normal JavaScript code and can use typed version of JavaScript whenever you want. TypeScript files are using extension .ts and this will be compiled using a compiler named tsc. The following is a sample program written in TypeScript greeter.ts 1: class Greeter { 2: greeting: string; 3: constructor (message: string) { 4: this.greeting = message; 5: } 6: greet() { 7: return "Hello, " + this.greeting; 8: } 9: } 10: 11: var greeter = new Greeter("world"); 12: 13: var button = document.createElement('button') 14: button.innerText = "Say Hello" 15: button.onclick = function() { 16: alert(greeter.greet()) 17: } 18: 19: document.body.appendChild(button) .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The above program is compiling with the TypeScript compiler as shown in the below picture The TypeScript compiler will generate a JavaScript file after compiling the TypeScript program. If your TypeScript programs having any reference to other TypeScript files, it will automatically generate JavaScript files for the each referenced files. The following code block shows the compiled version of plain JavaScript for the above greeter.ts greeter.js 1: var Greeter = (function () { 2: function Greeter(message) { 3: this.greeting = message; 4: } 5: Greeter.prototype.greet = function () { 6: return "Hello, " + this.greeting; 7: }; 8: return Greeter; 9: })(); 10: var greeter = new Greeter("world"); 11: var button = document.createElement('button'); 12: button.innerText = "Say Hello"; 13: button.onclick = function () { 14: alert(greeter.greet()); 15: }; 16: document.body.appendChild(button); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Tooling Support with Visual Studio TypeScript is providing a plug-in for Visual Studio which will provide an excellent support for writing TypeScript programs within the Visual Studio. The following screen shot shows the Visual Studio template for TypeScript apps The following are the few screen shots of Visual Studio IDE for TypeScript apps. Summary TypeScript is Microsoft's solution for writing scalable JavaScript apps which will solve lot of problems involved in larger JavaScript apps. I hope that this solution will attract lot of developers who are really looking for writing maintainable structured code in JavaScript, without losing any productivity. TypeScript lets developers to write JavaScript apps with the help of Static Types, Interfaces, Modules and Classes and also providing better productivity. I am a passionate developer on Node.JS and would definitely try to use TypeScript for building Node.JS apps on the Windows Azure cloud. I am really excited about to writing Node.JS apps by using TypeScript, from my favorite development IDE Visual Studio. You can follow me on twitter at @shijucv

Read the article

Tools to Help Post Content On Your WordPress Blog

- by Matthew Guay

Now that you’ve got a nice blog, you want to do more with it and start posting content. Here we look at some tools that will allow you to post directly to your WordPress blog. Writing a new blog post is easy with WordPress as we saw in our previous post about Starting your own WordPress blog. The web editor gives you a lot of features and even lets you edit your post’s source code if you enjoy hacking HTML. There are other tools that will allow you to post content, here we look at how you can post with dedicated apps, browser plugins, and even by email. Windows Live Writer Windows Live Writer (part of the Windows Live Essentials Suite) is a great app for posting content to your blog. This free program for Microsoft lets you post content to a variety of blogging services, including Blogger, Typepad, LiveJournal, and of course WordPress. You can write blog posts directly from its Word-like editor, complete with pictures and advanced formatting. Even if you’re offline, you can still write posts and save them for when you’re online again. For more information about installing Live writer, check out our article on how to Install Windows Live Essentials In Windows 7. Once Live Writer is installed, open it to add your blog. If you already had Live Writer installed and configured for a blog, you can add your new blog, too. Just click your blog’s name in the top right corner, and select “Add blog account”. Select “Other blog service” to add your WordPress blog to Writer, and click Next. Enter your blog’s web address, and your username and password. Check Remember my password so you don’t have to enter it every time you write something. Writer will analyze your blog and setup your account. During the setup process it may ask to post a temporary post. This will let you preview blog posts using your blog’s real theme, which is helpful, so click Yes. Finally, add your Blog’s name, and click Finish. You can now use the rich editor to write and add content to a new blog post. Select the Preview tab to see how your post will look on your blog… Or, if you’re a HTML geek, select the Source tab to edit the code of your blog post. From the bottom of the window, you can choose categories, insert tags, and even schedule the post to publish on a different day. Live Writer is fully integrated with WordPress; you’re not missing anything by using the desktop editor. If you want to edit a post you’ve already published, click the Open button and select the post. You can chose and edit any post, including ones you published via the web interface or other editors. Add Multimedia Content to your Posts with Live Writer Back in the Edit tab, you can add pictures, videos and more from the sidebar. Select what you want to insert. Pictures If you insert a picture, you can add many nice borders and designs to it. Or, you can even add artistic effects from the Effects tab in the sidebar. Photo Gallery If you want to post several pictures, say some of your vacation shots, then inserting a picture gallery may be the best option. Select Insert Photo Gallery in the sidebar, and then choose the pictures you want in the gallery. Once the gallery is inserted, you can choose from several styles to showcase your pictures. When you post the blog, you will be asked to sign in with your Windows Live ID as the gallery pictures will be stored in the free Skydrive storage service. Your blog readers can see the preview of your pictures directly on your blog, and then can view each individual picture, download them, or see a slideshow online via the link. Video If you want to add a video to your blog post, select Video from the sidebar as above. You can select a video that’s already online, or you can choose a new video from file and upload it via YouTube directly from Windows Live Writer. Note that you will have to sign in with your YouTube account to upload videos to YouTube, so if you’re not logged in you’ll be prompted to do so when you click Insert. Geek Tip: If you ever want to copy your Live Writer settings to another computer, check out our article on how to Backup Your Windows Live Writer Settings. Microsoft Office Word Word 2007 and 2010 also let you post content directly to your blog. This is especially nice if you’ve already typed up a document and think it would be good on your Blog as well. Check out our in-depth tutorial on posting blog posts via Word 2007 using Word 2007 as a blogging tool. This works in Word 2010 too, except the Office Orb has been replaced by the new Backstage view. So, in Word 2010, to start a new blog post, click File \ New then select Blog post. Proceed as you would in Word 2007 to add your blog settings and post the content you want. Or, if you’ve already written a document and want to post it, select File \ Share (or Save and Send in the final version of Word 2010), and then click Publish as Blog Post. If you haven’t setup your blog account yet, set it up as shown in the Word 2007 article. Post Via Email Most of us use email daily, and already have our favorite email app or service. Whether on your desktop or mobile phone, it’s easy to create rich emails and add content. WordPress lets you generate a unique email address that you can use to easily post content and email to your blog. Just compose your email with the subject as the title of your post, and send it to this unique address. Your new post will be up in minutes. To active this feature, click the My Account button in the top menu bar in your WordPress.com account, and select My Blogs. Click the Enable button under Post by Email beside your blog’s name. Now you’ll have a private email you can use to post to your blog. Anything you send to this email will be posted as a new post. If you think your email may be compromised, click Regenerate to get a new publishing email address. Any email program or webapp now is a blog post editor. Feel free to use rich formatting or insert pictures; it all comes through great. This is also a great way to post to your blog from your mobile device. Whether you’re using webmail or a dedicated email client on your phone, you can now blog from anywhere. Mobile Applications WordPress also offer dedicated applications for blogging directly from your mobile device. You can write new posts, edit existing ones, and manage comments all from your Smartphone. Currently they offer apps for iPhone, Android, and Blackberry. Check them out at the link below. Conclusion Whether you want to write from your browser or email a post to your blog, WordPress is flexible enough to work right along with your preferences. However you post, you can be sure that it will look professional and be easily accessible with your WordPress blog. Download Windows Live Writer Download WordPress apps for your mobile device Similar Articles Productive Geek Tips Quick Tip: Set a Future Date for a Post in WordPressAdd Social Bookmarking (Digg This!) Links to your Wordpress BlogFuture Date a Post in Windows Live WriterHow To Start Your Own Professional Blog with WordPressUsing Word 2007 as a Blogging Tool TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Fun with 47 charts and graphs Tomorrow is Mother’s Day Check the Average Speed of YouTube Videos You’ve Watched OutlookStatView Scans and Displays General Usage Statistics How to Add Exceptions to the Windows Firewall Office 2010 reviewed in depth by Ed Bott

Read the article

TFS 2010 SDK: Smart Merge - Programmatically Create your own Merge Tool

- by Tarun Arora

Technorati Tags: Team Foundation Server 2010,TFS SDK,TFS API,TFS Merge Programmatically,TFS Work Items Programmatically,TFS Administration Console,ALM The information available in the Merge window in Team Foundation Server 2010 is very important in the decision making during the merging process. However, at present the merge window shows very limited information, more that often you are interested to know the work item, files modified, code reviewer notes, policies overridden, etc associated with the change set. Our friends at Microsoft are working hard to change the game again with vNext, but because at present the merge window is a model window you have to cancel the merge process and go back one after the other to check the additional information you need. If you can relate to what i am saying, you will enjoy this blog post! I will show you how to programmatically create your own merging window using the TFS 2010 API. A few screen shots of the WPF TFS 2010 API – Custom Merging Application that we will be creating programmatically, Excited??? Let’s start coding… 1. Get All Team Project Collections for the TFS Server You can read more on connecting to TFS programmatically on my blog post => How to connect to TFS Programmatically 1: public static ReadOnlyCollection<CatalogNode> GetAllTeamProjectCollections() 2: { 3: TfsConfigurationServer configurationServer = 4: TfsConfigurationServerFactory. 5: GetConfigurationServer(new Uri("http://xxx:8080/tfs/")); 6: 7: CatalogNode catalogNode = configurationServer.CatalogNode; 8: return catalogNode.QueryChildren(new Guid[] 9: { CatalogResourceTypes.ProjectCollection }, 10: false, CatalogQueryOptions.None); 11: } 2. Get All Team Projects for the selected Team Project Collection You can read more on connecting to TFS programmatically on my blog post => How to connect to TFS Programmatically 1: public static ReadOnlyCollection<CatalogNode> GetTeamProjects(string instanceId) 2: { 3: ReadOnlyCollection<CatalogNode> teamProjects = null; 4: 5: TfsConfigurationServer configurationServer = 6: TfsConfigurationServerFactory.GetConfigurationServer(new Uri("http://xxx:8080/tfs/")); 7: 8: CatalogNode catalogNode = configurationServer.CatalogNode; 9: var teamProjectCollections = catalogNode.QueryChildren(new Guid[] {CatalogResourceTypes.ProjectCollection }, 10: false, CatalogQueryOptions.None); 11: 12: foreach (var teamProjectCollection in teamProjectCollections) 13: { 14: if (string.Compare(teamProjectCollection.Resource.Properties["InstanceId"], instanceId, true) == 0) 15: { 16: teamProjects = teamProjectCollection.QueryChildren(new Guid[] { CatalogResourceTypes.TeamProject }, false, 17: CatalogQueryOptions.None); 18: } 19: } 20: 21: return teamProjects; 22: } 3. Get All Branches with in a Team Project programmatically I will be passing the name of the Team Project for which i want to retrieve all the branches. When consuming the ‘Version Control Service’ you have the method QueryRootBranchObjects, you need to pass the recursion type => none, one, full. Full implies you are interested in all branches under that root branch. 1: public static List<BranchObject> GetParentBranch(string projectName) 2: { 3: var branches = new List<BranchObject>(); 4: 5: var tfs = TfsTeamProjectCollectionFactory.GetTeamProjectCollection(new Uri("http://<ServerName>:8080/tfs/<teamProjectName>")); 6: var versionControl = tfs.GetService<VersionControlServer>(); 7: 8: var allBranches = versionControl.QueryRootBranchObjects(RecursionType.Full); 9: 10: foreach (var branchObject in allBranches) 11: { 12: if (branchObject.Properties.RootItem.Item.ToUpper().Contains(projectName.ToUpper())) 13: { 14: branches.Add(branchObject); 15: } 16: } 17: 18: return branches; 19: } 4. Get All Branches associated to the Parent Branch Programmatically Now that we have the parent branch, it is important to retrieve all child branches of that parent branch. Lets see how we can achieve this using the TFS API. 1: public static List<ItemIdentifier> GetChildBranch(string parentBranch) 2: { 3: var branches = new List<ItemIdentifier>(); 4: 5: var tfs = TfsTeamProjectCollectionFactory.GetTeamProjectCollection(new Uri("http://<ServerName>:8080/tfs/<CollectionName>")); 6: var versionControl = tfs.GetService<VersionControlServer>(); 7: 8: var i = new ItemIdentifier(parentBranch); 9: var allBranches = 10: versionControl.QueryBranchObjects(i, RecursionType.None); 11: 12: foreach (var branchObject in allBranches) 13: { 14: foreach (var childBranche in branchObject.ChildBranches) 15: { 16: branches.Add(childBranche); 17: } 18: } 19: 20: return branches; 21: } 5. Get Merge candidates between two branches Programmatically Now that we have the parent and the child branch that we are interested to perform a merge between we will use the method ‘GetMergeCandidates’ in the namespace ‘Microsoft.TeamFoundation.VersionControl.Client’ => http://msdn.microsoft.com/en-us/library/bb138934(v=VS.100).aspx 1: public static MergeCandidate[] GetMergeCandidates(string fromBranch, string toBranch) 2: { 3: var tfs = TfsTeamProjectCollectionFactory.GetTeamProjectCollection(new Uri("http://<ServerName>:8080/tfs/<CollectionName>")); 4: var versionControl = tfs.GetService<VersionControlServer>(); 5: 6: return versionControl.GetMergeCandidates(fromBranch, toBranch, RecursionType.Full); 7: } 6. Get changeset details Programatically Now that we have the changeset id that we are interested in, we can get details of the changeset. The Changeset object contains the properties => http://msdn.microsoft.com/en-us/library/microsoft.teamfoundation.versioncontrol.client.changeset.aspx - Changes: Gets or sets an array of Change objects that comprise this changeset. - CheckinNote: Gets or sets the check-in note of the changeset. - Comment: Gets or sets the comment of the changeset. - PolicyOverride: Gets or sets the policy override information of this changeset. - WorkItems: Gets an array of work items that are associated with this changeset. 1: public static Changeset GetChangeSetDetails(int changeSetId) 2: { 3: var tfs = TfsTeamProjectCollectionFactory.GetTeamProjectCollection(new Uri("http://<ServerName>:8080/tfs/<CollectionName>")); 4: var versionControl = tfs.GetService<VersionControlServer>(); 5: 6: return versionControl.GetChangeset(changeSetId); 7: } 7. Possibilities In future posts i will try and extend this idea to explore further possibilities, but few features that i am sure will further help during the merge decision making process would be, - View changed files - Compare modified file with current/previous version - Merge Preview - Last Merge date Any other features that you can think of?

Read the article

Quartz.Net Windows Service Configure Logging

- by Tarun Arora

In this blog post I’ll be covering, Logging for Quartz.Net Windows Service 01 – Why doesn’t Quartz.Net Windows Service log by default 02 – Configuring Quartz.Net windows service for logging to eventlog, file, console, etc 03 – Results: Logging in action If you are new to Quartz.Net I would recommend going through, A brief Introduction to Quartz.net Walkthrough of Installing & Testing Quartz.Net as a Windows Service Writing & Scheduling your First HelloWorld job with Quartz.Net 01 – Why doesn’t Quartz.Net Windows Service log by default If you are trying to figure out why… The Quartz.Net windows service isn’t logging The Quartz.Net windows service isn’t writing anything to the event log The Quartz.Net windows service isn’t writing anything to a file How do I configure Quartz.Net windows service to use log4Net How do I change the level of logging for Quartz.Net Look no further, This blog post should help you answer these questions. Quartz.NET uses the Common.Logging framework for all of its logging needs. If you navigate to the directory where Quartz.Net Windows Service is installed (I have the service installed in C:\Program Files (x86)\Quartz.net, you can find out the location by looking at the properties of the service) and open ‘Quartz.Server.exe.config’ you’ll see that the Quartz.Net is already set up for logging to ConsoleAppender and EventLogAppender, but only ‘ConsoleAppender’ is set up as active. So, unless you have the console associated to the Quartz.Net service you won’t be able to see any logging. <log4net> <appender name="ConsoleAppender" type="log4net.Appender.ConsoleAppender"> <layout type="log4net.Layout.PatternLayout"> <conversionPattern value="%d [%t] %-5p %l - %m%n" /> </layout> </appender> <appender name="EventLogAppender" type="log4net.Appender.EventLogAppender"> <layout type="log4net.Layout.PatternLayout"> <conversionPattern value="%d [%t] %-5p %l - %m%n" /> </layout> </appender> <root> <level value="INFO" /> <appender-ref ref="ConsoleAppender" />   </root> </log4net> Problem: In the configuration above Quartz.Net Windows Service only has ConsoleAppender active. So, no logging will be done to EventLog. More over the RollingFileAppender isn’t setup at all. So, Quartz.Net will not log to an application trace log file. 02 – Configuring Quartz.Net windows service for logging to eventlog, file, console, etc Let’s change this behaviour by changing the config file… In the below config file, I have added the RollingFileAppender. This will configure Quartz.Net service to write to a log file. (<appender name="GeneralLog" type="log4net.Appender.RollingFileAppender">) I have specified the location for the log file (<arg key="configFile" value="Trace/application.log.txt"/>) I have enabled the EventLogAppender and RollingFileAppender to be written to by Quartz. Net windows service Changed the default level of logging from ‘Info’ to ‘All’. This means all activity performed by Quartz.Net Windows service will be logged. You might want to tune this back to ‘Debug’ or ‘Info’ later as logging ‘All’ will produce too much data to the logs. (<level value="ALL"/>) Since I have changed the logging level to ‘All’, I have added applicationSetting to remove logging log4Net internal debugging. (<add key="log4net.Internal.Debug" value="false"/>) <?xml version="1.0" encoding="utf-8" ?> <configuration> <configSections> <section name="quartz" type="System.Configuration.NameValueSectionHandler, System, Version=1.0.5000.0,Culture=neutral, PublicKeyToken=b77a5c561934e089" /> <section name="log4net" type="log4net.Config.Log4NetConfigurationSectionHandler, log4net" /> <sectionGroup name="common"> <section name="logging" type="Common.Logging.ConfigurationSectionHandler, Common.Logging" /> </sectionGroup> </configSections> <common> <logging> <factoryAdapter type="Common.Logging.Log4Net.Log4NetLoggerFactoryAdapter, Common.Logging.Log4net"> <arg key="configType" value="INLINE" /> <arg key="configFile" value="Trace/application.log.txt"/> <arg key="level" value="ALL" /> </factoryAdapter> </logging> </common> <appSettings> <add key="log4net.Internal.Debug" value="false"/> </appSettings> <log4net> <appender name="ConsoleAppender" type="log4net.Appender.ConsoleAppender"> <layout type="log4net.Layout.PatternLayout"> <conversionPattern value="%d [%t] %-5p %l - %m%n" /> </layout> </appender> <appender name="EventLogAppender" type="log4net.Appender.EventLogAppender"> <layout type="log4net.Layout.PatternLayout"> <conversionPattern value="%d [%t] %-5p %l - %m%n" /> </layout> </appender> <appender name="GeneralLog" type="log4net.Appender.RollingFileAppender"> <file value="Trace/application.log.txt"/> <appendToFile value="true"/> <maximumFileSize value="1024KB"/> <rollingStyle value="Size"/> <layout type="log4net.Layout.PatternLayout"> <conversionPattern value="%d{HH:mm:ss} [%t] %-5p %c - %m%n"/> </layout> </appender> <root> <level value="ALL" /> <appender-ref ref="ConsoleAppender" /> <appender-ref ref="EventLogAppender" /> <appender-ref ref="GeneralLog"/> </root> </log4net> </configuration> Note – Please ensure you restart the Quartz.Net Windows service for the config changes to be picked up by the service 03 – Results: Logging in action Once you start the Quartz.Net Windows Service up, the logging should be initiated to write all activities in the Console, EventLog and File… See screen shots below… Figure – Quartz.Net Windows Service logging all activity to the event log Figure – Quartz.Net Windows Service logging all activity to the application log file Where is the output from log4Net ConsoleAppender? As a default behaviour, the console isn't available in windows services, web services, windows forms. The output will simply be dismissed. Unless you are running the process interactively. Which you can do by firing up Quartz.Server.exe –i to see the output This was fourth in the series of posts on enterprise scheduling using Quartz.net, in the next post I’ll be covering troubleshooting why a scheduled task hasn’t fired on Quartz.net windows service. All Quartz.Net specific blog posts can listed here. Thank you for taking the time out and reading this blog post. If you enjoyed the post, remember to subscribe to http://feeds.feedburner.com/TarunArora. Stay tuned!

Read the article

Responsive Inline Elements with Twitter Bootstrap

- by MightyZot

Originally posted on: http://geekswithblogs.net/MightyZot/archive/2013/11/12/responsive-inline-elements-with-twitter-bootstrap.aspxTwitter Boostrap is a responsive css platform created by some dudes affiliated with Twitter and since supported and maintained by an open source following. I absolutely love the new version of this css toolkit. They rebuilt it with a mobile first strategy and it’s very easy to layout pages once you get the hang of it. Using a css / javascript framework like bootstrap is certainly much easier than coding your layout by hand. And, you get a “leg up” when it comes to adding responsive features to your site. Bootstrap includes column layout classes that let you specify size and placement based upon the viewport width. In addition, there are a handful of responsive helpers to hide and show content based upon the user’s device size. Most notably, the visible-xs, visible-sm, visible-md, and visible-lg classes let you show content for devices corresponding to those sizes (they are listed in the bootstrap docs.) hidden-xs, hidden-sm, hidden-md, and hidden-lg let you hide content for devices with those respective sizes. These helpers work great for showing and hiding block elements. Unfortunately, there isn’t a provision yet in Twitter Bootstrap (as of the time of this writing) for inline elements. We are using the navbar classes to create a navigation bar at the top of our website, www.crowdit.com. When you shrink the width of the screen to tablet or phone size, the tools in the navbar are turned into a drop down menu, and a button appears on the right side of the navbar. This is great! But, we wanted different content to display based upon whether the items were on the navbar versus when they were in the dropdown menu. The visible-?? and hidden-?? classes make this easy for images and block elements. In our case, we wanted our anchors to show different text depending upon whether they’re in the navbar, or in the dropdown. span is inherently inline and it can be a block element. My first approach was to create two anchors for each options, one set visible when the navbar is on a desktop or laptop with a wide display and another set visible when the elements converted to a dropdown menu. That works fine with the visible-?? and hidden-?? classes, but it just doesn’t seem that clean to me. I put up with that for about a week…last night I created the following classes to augment the block-based classes provided by bootstrap. .cdt-hidden-xs, .cdt-hidden-sm, .cdt-hidden-md, .cdt-hidden-lg { display: inline !important; } @media (max-width:767px) { .cdt-hidden-xs, .cdt-hidden-sm.cdt-hidden-xs, .cdt-hidden-md.cdt-hidden-xs, .cdt-hidden-lg.cdt-hidden-xs { display: none !important; } } @media (min-width:768px) and (max-width:991px) { .cdt-hidden-xs.cdt-hidden-sm, .cdt-hidden-sm, .cdt-hidden-md.cdt-hidden-sm, .cdt-hidden-lg.cdt-hidden-sm { display: none !important; } } @media (min-width:992px) and (max-width:1199px) { .cdt-hidden-xs.cdt-hidden-md, .cdt-hidden-sm.cdt-hidden-md, .cdt-hidden-md, .cdt-hidden-lg.cdt-hidden-md { display: none !important; } } @media (min-width:1200px) { .cdt-hidden-xs.cdt-hidden-lg, .cdt-hidden-sm.cdt-hidden-lg, .cdt-hidden-md.cdt-hidden-lg, .cdt-hidden-lg { display: none !important; } } .cdt-visible-xs, .cdt-visible-sm, .cdt-visible-md, .cdt-visible-lg { display: none !important; } @media (max-width:767px) { .cdt-visible-xs, .cdt-visible-sm.cdt-visible-xs, .cdt-visible-md.cdt-visible-xs, .cdt-visible-lg.cdt-visible-xs { display: inline !important; } } @media (min-width:768px) and (max-width:991px) { .cdt-visible-xs.cdt-visible-sm, .cdt-visible-sm, .cdt-visible-md.cdt-visible-sm, .cdt-visible-lg.cdt-visible-sm { display: inline !important; } } @media (min-width:992px) and (max-width:1199px) { .cdt-visible-xs.cdt-visible-md, .cdt-visible-sm.cdt-visible-md, .cdt-visible-md, .cdt-visible-lg.cdt-visible-md { display: inline !important; } } @media (min-width:1200px) { .cdt-visible-xs.cdt-visible-lg, .cdt-visible-sm.cdt-visible-lg, .cdt-visible-md.cdt-visible-lg, .cdt-visible-lg { display: inline !important; } } I created these by looking at the example provided by bootstrap and consolidating the styles. “cdt” is just a prefix that I’m using to distinguish these classes from the block-based classes in bootstrap. You are welcome to change the prefix to whatever feels right for you. These classes can be applied to spans in textual content to hide and show text based upon the browser width. Applying the styles is simple… This text is visible in extra small This text is visible in small Why would you want to do this? Here are a couple of examples, shown in screen shots. This is the CrowdIt navbar on larger displays. Notice how the text is two line and certain words are capitalized? Now, check this out! Here is a screen shot showing the dropdown menu that’s displayed when the browser window is tablet or phone sized. The markup to make this happen is quite simple…take a look. <li> <a href="@Url.Action("what-is-crowdit","home")" title="Learn about what CrowdIt can do for your Small Business"> WHAT is CrowdIt? What is CrowdIt? </a> </li> There is a single anchor tag in this example and only the spans change visibility based on browser width. I left them separate for readability and because I wanted to use the small tag; however, you could just as easily hide the “WHAT” and the br tag on small displays and replace them with “What “, consolidating this even further to text containing a single span. WHAT What is CrowdIt? You might be a master of css and have a better method of handling this problem. If so, I’d love to hear about your solution…leave me some feedback! You’ll be entered into a drawing for a chance to win an autographed picture of ME! Yay!

Read the article

3D picking lwjgl

- by Wirde

I have written some code to preform 3D picking that for some reason dosn't work entirely correct! (Im using LWJGL just so you know.) I posted this at stackoverflow at first but after researching some more in to my problem i found this neat site and tought that you guys might be more qualified to answer this question. This is how the code looks like: if(Mouse.getEventButton() == 1) { if (!Mouse.getEventButtonState()) { Camera.get().generateViewMatrix(); float screenSpaceX = ((Mouse.getX()/800f/2f)-1.0f)*Camera.get().getAspectRatio(); float screenSpaceY = 1.0f-(2*((600-Mouse.getY())/600f)); float displacementRate = (float)Math.tan(Camera.get().getFovy()/2); screenSpaceX *= displacementRate; screenSpaceY *= displacementRate; Vector4f cameraSpaceNear = new Vector4f((float) (screenSpaceX * Camera.get().getNear()), (float) (screenSpaceY * Camera.get().getNear()), (float) (-Camera.get().getNear()), 1); Vector4f cameraSpaceFar = new Vector4f((float) (screenSpaceX * Camera.get().getFar()), (float) (screenSpaceY * Camera.get().getFar()), (float) (-Camera.get().getFar()), 1); Matrix4f tmpView = new Matrix4f(); Camera.get().getViewMatrix().transpose(tmpView); Matrix4f invertedViewMatrix = (Matrix4f)tmpView.invert(); Vector4f worldSpaceNear = new Vector4f(); Matrix4f.transform(invertedViewMatrix, cameraSpaceNear, worldSpaceNear); Vector4f worldSpaceFar = new Vector4f(); Matrix4f.transform(invertedViewMatrix, cameraSpaceFar, worldSpaceFar); Vector3f rayPosition = new Vector3f(worldSpaceNear.x, worldSpaceNear.y, worldSpaceNear.z); Vector3f rayDirection = new Vector3f(worldSpaceFar.x - worldSpaceNear.x, worldSpaceFar.y - worldSpaceNear.y, worldSpaceFar.z - worldSpaceNear.z); rayDirection.normalise(); Ray clickRay = new Ray(rayPosition, rayDirection); Vector tMin = new Vector(), tMax = new Vector(), tempPoint; float largestEnteringValue, smallestExitingValue, temp, closestEnteringValue = Camera.get().getFar()+0.1f; Drawable closestDrawableHit = null; for(Drawable d : this.worldModel.getDrawableThings()) { // Calcualte AABB for each object... needs to be moved later... firstVertex = true; for(Surface surface : d.getSurfaces()) { for(Vertex v : surface.getVertices()) { worldPosition.x = (v.x+d.getPosition().x)*d.getScale().x; worldPosition.y = (v.y+d.getPosition().y)*d.getScale().y; worldPosition.z = (v.z+d.getPosition().z)*d.getScale().z; worldPosition = worldPosition.rotate(d.getRotation()); if (firstVertex) { maxX = worldPosition.x; maxY = worldPosition.y; maxZ = worldPosition.z; minX = worldPosition.x; minY = worldPosition.y; minZ = worldPosition.z; firstVertex = false; } else { if (worldPosition.x > maxX) { maxX = worldPosition.x; } if (worldPosition.x < minX) { minX = worldPosition.x; } if (worldPosition.y > maxY) { maxY = worldPosition.y; } if (worldPosition.y < minY) { minY = worldPosition.y; } if (worldPosition.z > maxZ) { maxZ = worldPosition.z; } if (worldPosition.z < minZ) { minZ = worldPosition.z; } } } } // ray/slabs intersection test... // clickRay.getOrigin().x + clickRay.getDirection().x * f = minX // clickRay.getOrigin().x - minX = -clickRay.getDirection().x * f // clickRay.getOrigin().x/-clickRay.getDirection().x - minX/-clickRay.getDirection().x = f // -clickRay.getOrigin().x/clickRay.getDirection().x + minX/clickRay.getDirection().x = f largestEnteringValue = -clickRay.getOrigin().x/clickRay.getDirection().x + minX/clickRay.getDirection().x; temp = -clickRay.getOrigin().y/clickRay.getDirection().y + minY/clickRay.getDirection().y; if(largestEnteringValue < temp) { largestEnteringValue = temp; } temp = -clickRay.getOrigin().z/clickRay.getDirection().z + minZ/clickRay.getDirection().z; if(largestEnteringValue < temp) { largestEnteringValue = temp; } smallestExitingValue = -clickRay.getOrigin().x/clickRay.getDirection().x + maxX/clickRay.getDirection().x; temp = -clickRay.getOrigin().y/clickRay.getDirection().y + maxY/clickRay.getDirection().y; if(smallestExitingValue > temp) { smallestExitingValue = temp; } temp = -clickRay.getOrigin().z/clickRay.getDirection().z + maxZ/clickRay.getDirection().z; if(smallestExitingValue < temp) { smallestExitingValue = temp; } if(largestEnteringValue > smallestExitingValue) { //System.out.println("Miss!"); } else { if (largestEnteringValue < closestEnteringValue) { closestEnteringValue = largestEnteringValue; closestDrawableHit = d; } } } if(closestDrawableHit != null) { System.out.println("Hit at: (" + clickRay.setDistance(closestEnteringValue).x + ", " + clickRay.getCurrentPosition().y + ", " + clickRay.getCurrentPosition().z); this.worldModel.removeDrawableThing(closestDrawableHit); } } } I just don't understand what's wrong, the ray are shooting and i do hit stuff that gets removed but the result of the ray are verry strange it sometimes removes the thing im clicking at, sometimes it removes things thats not even close to what im clicking at, and sometimes it removes nothing at all. Edit: Okay so i have continued searching for errors and by debugging the ray (by painting smal dots where it travles) i can now se that there is something oviously wrong with the ray that im sending out... it has its origin near the world center (nearer or further away depending on where on the screen im clicking) and always shots to the same position no matter where I direct my camera... My initial toughts is that there might be some error in the way i calculate my viewMatrix (since it's not possible to get the viewmatrix from the gluLookAt method in lwjgl; I have to build it my self and I guess thats where the problem is at)... Edit2: This is how i calculate it currently: private double[][] viewMatrixDouble = {{0,0,0,0}, {0,0,0,0}, {0,0,0,0}, {0,0,0,1}}; public Vector getCameraDirectionVector() { Vector actualEye = this.getActualEyePosition(); return new Vector(lookAt.x-actualEye.x, lookAt.y-actualEye.y, lookAt.z-actualEye.z); } public Vector getActualEyePosition() { return eye.rotate(this.getRotation()); } public void generateViewMatrix() { Vector cameraDirectionVector = getCameraDirectionVector().normalize(); Vector side = Vector.cross(cameraDirectionVector, this.upVector).normalize(); Vector up = Vector.cross(side, cameraDirectionVector); viewMatrixDouble[0][0] = side.x; viewMatrixDouble[0][1] = up.x; viewMatrixDouble[0][2] = -cameraDirectionVector.x; viewMatrixDouble[1][0] = side.y; viewMatrixDouble[1][1] = up.y; viewMatrixDouble[1][2] = -cameraDirectionVector.y; viewMatrixDouble[2][0] = side.z; viewMatrixDouble[2][1] = up.z; viewMatrixDouble[2][2] = -cameraDirectionVector.z; /* Vector actualEyePosition = this.getActualEyePosition(); Vector zaxis = new Vector(this.lookAt.x - actualEyePosition.x, this.lookAt.y - actualEyePosition.y, this.lookAt.z - actualEyePosition.z).normalize(); Vector xaxis = Vector.cross(upVector, zaxis).normalize(); Vector yaxis = Vector.cross(zaxis, xaxis); viewMatrixDouble[0][0] = xaxis.x; viewMatrixDouble[0][1] = yaxis.x; viewMatrixDouble[0][2] = zaxis.x; viewMatrixDouble[1][0] = xaxis.y; viewMatrixDouble[1][1] = yaxis.y; viewMatrixDouble[1][2] = zaxis.y; viewMatrixDouble[2][0] = xaxis.z; viewMatrixDouble[2][1] = yaxis.z; viewMatrixDouble[2][2] = zaxis.z; viewMatrixDouble[3][0] = -Vector.dot(xaxis, actualEyePosition); viewMatrixDouble[3][1] =-Vector.dot(yaxis, actualEyePosition); viewMatrixDouble[3][2] = -Vector.dot(zaxis, actualEyePosition); */ viewMatrix = new Matrix4f(); viewMatrix.load(getViewMatrixAsFloatBuffer()); } Would be verry greatfull if anyone could verify if this is wrong or right, and if it's wrong; supply me with the right way of doing it... I have read alot of threads and documentations about this but i can't seam to wrapp my head around it... Edit3: Okay with the help of Byte56 (thanks alot for the help) i have now concluded that it's not the viewMatrix that is the problem... I still get the same messedup result; anyone that think that they can find the error in my code, i certenly can't, have bean working on this for 3 days now :(

Read the article

Are you reporting Visual Studio 2012 issues to Microsoft correctly?

- by Tarun Arora

Issues you may run into while using Visual Studio need to be reported to the Microsoft Product Team via the Microsoft connect site. The Microsoft team then tries to reproduce the issue using the details provided by you. If the information you provide isn’t sufficient to reproduce the issue the team tries to contact you for specifics, this not only increases the cycle time to resolution but the lack of communication also results in issues not being resolved. So, when I report an issue one part of me tells me to include as much detail about the issue as I can clubbing screen shots, repo steps, system information, visual studio version information,… the other half tells me this is so time consuming, leave it for now and come back to fill all these details later. Reporting a bug but not including the supporting information is an invitation to excuses like … Microsoft has absolutely changed this experience for VS 2012. The Microsoft Visual Studio Feedback tool is designed to simplify the process of providing feedback and reporting issues to Microsoft that you may encounter while using Microsoft Visual Studio 2012. Note – The Microsoft Visual Studio 2012 Feedback client currently only works for VS 2012 and not any other versions of Visual Studio. Setting up the Microsoft Visual Studio 2012 Feedback client Open Visual Studio, from the Tools menu select Extension and Updates. In the Extension and Updates window, click Online from the left pane and search using the text ‘feedback’, download and Install Microsoft Visual Studio 2012 Feedback Tool by following the instructions from the wizard. Note - Restarting Visual Studio after the install is a must! How to report a bug for Visual Studio 2012? Click on the Help menu and choose Report a Bug You should see an icon Microsoft Visual Studio 2012 Feedback Tool come up in the system tray icon area You’ll need to accept the Privacy statement. You have the option of reporting the feedback as private or public. Microsoft works with several Partners, MVP’s and Vendors who get access to early bits of Microsoft products for valuation. This is where it becomes essential to report the feedback privately. I would choose the Public option otherwise. After all if it’s out there in the public, others can discover and add to it easily. You now have the option to report a new issue or add to an existing issue. Should you choose to add to an existing issue you should have the feedback ID of the issue available. This can be obtained from the Microsoft Connect site. For now I am going to focus on reporting a new feedback privately. Filling out the feedback details You will notice that VsInfo.xml and DxDiagOutput.txt are automatically attached as you enter this screen (more on that later). Feedback Type Choose the feedback type from (Performance, Hang, Crash, Other) Note – The record button will only be enabled once you have enabled once you have chosen the feedback type, Bug-repro recording is not available for Windows Server 2008. Effective Title and Description Enter a title that helps us differentiate the bug when it appears in a list, so that we can group it with any related bugs, assign it to a developer more effectively, and resolve it more quickly. Example: Imagine that you are submitting a bug because you tried to install Service Pack 1 and got a message that Visual Studio is not installed even though it is. Helpful: Installed Visual Studio version not detected during Service Pack 1 setup. Not helpful: Service Pack 1 problem. Tip: Write the problem description first, and then distil it to create a title. Example Description: Helpful: When I run Service Pack 1 Setup, I get the message "No Visual Studio version is detected" even though I have Visual Studio 2010 Ultimate and Visual C++ 2010 Express installed on my machine. Even though I uninstalled both editions, and then first reinstalled Ultimate and then Express, I still get the message. Record: Becoming a first class citizen Often a repro report is invaluable to describe and decipher the issue. Please use this feature to send actionable feedback. The record repro feature works differently depending on the feedback type you selected. Please find below details for each recording option. You can start recording simply by selecting a feedback type, and clicking on the “Record” button. When "Performance" is the bug type: When the Microsoft Visual Studio trace recorder starts, perform the actions that show the performance problem you want to report and then click on the "Stop Recording" button as soon as you experience the performance problem. Because the tool optimizes trace collection, you can run it for as long as it takes to show the problem, up to two hours. Note that, you need to stop recording as soon as the performance issue occurs, because the tool captures only the last couple minutes of your actions to optimize the trace collection. After you stop the recording, the tool takes up to two minutes to assemble the data and attach an ETLTrace.zip file to your bug report. The data includes information about Windows events and the Visual Studio code path. Note that, running the Microsoft Visual Studio trace recorder requires elevated user privilege. When "Crash" is the bug type: When the dialog box appears, select the running Visual Studio instance for which you want to show the steps that cause a crash. When the crash occurs, click on the "Stop Record" button. After you do this, two files are attached to your bug report - an AutomaticCrashDump.zip file that contains information about the crash and a ReproSteps.zip file that shows the repro steps. Repro steps are captured by Windows Problem Steps Recorder. Note that, you can pause the recording, and resume later, or for a specific step, you can add additional comments. When "Hang" is the bug type: The process for recording the steps that cause a hang resembles the one for crashes. The difference is, you can even collect a dump file after the VS hangs; start the VSFT either from the system tray or by starting a new instance of VS, select "Hang" as feedback type and click on the "Record" button. You will be prompted which VS to collect dump about, select the VS instance that hanged. VSFT collects a dump file regarding the hang, called MiniDump.zip, and attaches to your bug report. When "Other" is the bug type: When the problem step recorder starts, perform the actions that show the issue you want to report and then choose the "Stop” button. You can pause the recording, and resume later, or for a specific step, you can add additional comments. Once you’re done, ReproSteps.zip is added to your bug report. Pre-attached files It is essential for Microsoft to know what version of the the product are you currently using and what is the current configuration of your system. Note – The total size of all attachments in a bug report cannot exceed 2 GB, and every uncompressed attachment must be smaller than 512 MB. We recommend that you assemble all of your attachments, compress them together into a .zip file, and then attach the .zip file. Taking a screenshot Associate a screen shot by clicking the Take screenshot button, choose either the entire desktop, the specific monitor (useful if you are working in a multi monitor configuration) or the specific window in question. And finally … click Submit If you need further help, more details can be found here. You can view your feedback online by using the following URL “">https://connect.microsoft.com/VisualStudio/SearchResults.aspx?SearchQuery=<feedbackId>” Happy bug logging

Read the article

Bulk inserting best way to about it? + Helping me understand fully what I found so far

- by chobo2

Hi So I saw this post here and read it and it seems like bulk copy might be the way to go. http://stackoverflow.com/questions/682015/whats-the-best-way-to-bulk-database-inserts-from-c I still have some questions and want to know how things actually work. So I found 2 tutorials. http://www.codeproject.com/KB/cs/MultipleInsertsIn1dbTrip.aspx#_Toc196622241 http://www.codeproject.com/KB/linq/BulkOperations_LinqToSQL.aspx First way uses 2 ado.net 2.0 features. BulkInsert and BulkCopy. the second one uses linq to sql and OpenXML. This sort of appeals to me as I am using linq to sql already and prefer it over ado.net. However as one person pointed out in the posts what he just going around the issue at the cost of performance( nothing wrong with that in my opinion) First I will talk about the 2 ways in the first tutorial I am using VS2010 Express, .net 4.0, MVC 2.0, SQl Server 2005 Is ado.net 2.0 the most current version? Based on the technology I am using, is there some updates to what I am going to show that would improve it somehow? Is there any thing that these tutorial left out that I should know about? BulkInsert I am using this table for all the examples. CREATE TABLE [dbo].[TBL_TEST_TEST] ( ID INT IDENTITY(1,1) PRIMARY KEY, [NAME] [varchar](50) ) SP Code USE [Test] GO /****** Object: StoredProcedure [dbo].[sp_BatchInsert] Script Date: 05/19/2010 15:12:47 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO ALTER PROCEDURE [dbo].[sp_BatchInsert] (@Name VARCHAR(50) ) AS BEGIN INSERT INTO TBL_TEST_TEST VALUES (@Name); END C# Code /// <summary> /// Another ado.net 2.0 way that uses a stored procedure to do a bulk insert. /// Seems slower then "BatchBulkCopy" way and it crashes when you try to insert 500,000 records in one go. /// http://www.codeproject.com/KB/cs/MultipleInsertsIn1dbTrip.aspx#_Toc196622241 /// </summary> private static void BatchInsert() { // Get the DataTable with Rows State as RowState.Added DataTable dtInsertRows = GetDataTable(); SqlConnection connection = new SqlConnection(connectionString); SqlCommand command = new SqlCommand("sp_BatchInsert", connection); command.CommandType = CommandType.StoredProcedure; command.UpdatedRowSource = UpdateRowSource.None; // Set the Parameter with appropriate Source Column Name command.Parameters.Add("@Name", SqlDbType.VarChar, 50, dtInsertRows.Columns[0].ColumnName); SqlDataAdapter adpt = new SqlDataAdapter(); adpt.InsertCommand = command; // Specify the number of records to be Inserted/Updated in one go. Default is 1. adpt.UpdateBatchSize = 1000; connection.Open(); int recordsInserted = adpt.Update(dtInsertRows); connection.Close(); } So first thing is the batch size. Why would you set a batch size to anything but the number of records you are sending? Like I am sending 500,000 records so I did a Batch size of 500,000. Next why does it crash when I do this? If I set it to 1000 for batch size it works just fine. System.Data.SqlClient.SqlException was unhandled Message="A transport-level error has occurred when sending the request to the server. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)" Source=".Net SqlClient Data Provider" ErrorCode=-2146232060 Class=20 LineNumber=0 Number=233 Server="" State=0 StackTrace: at System.Data.Common.DbDataAdapter.UpdatedRowStatusErrors(RowUpdatedEventArgs rowUpdatedEvent, BatchCommandInfo[] batchCommands, Int32 commandCount) at System.Data.Common.DbDataAdapter.UpdatedRowStatus(RowUpdatedEventArgs rowUpdatedEvent, BatchCommandInfo[] batchCommands, Int32 commandCount) at System.Data.Common.DbDataAdapter.Update(DataRow[] dataRows, DataTableMapping tableMapping) at System.Data.Common.DbDataAdapter.UpdateFromDataTable(DataTable dataTable, DataTableMapping tableMapping) at System.Data.Common.DbDataAdapter.Update(DataTable dataTable) at TestIQueryable.Program.BatchInsert() in C:\Users\a\Downloads\TestIQueryable\TestIQueryable\TestIQueryable\Program.cs:line 124 at TestIQueryable.Program.Main(String[] args) in C:\Users\a\Downloads\TestIQueryable\TestIQueryable\TestIQueryable\Program.cs:line 16 InnerException: Time it took to insert 500,000 records with insert batch size of 1000 took "2 mins and 54 seconds" Of course this is no official time I sat there with a stop watch( I am sure there are better ways but was too lazy to look what they where) So I find that kinda slow compared to all my other ones(expect the linq to sql insert one) and I am not really sure why. Next I looked at bulkcopy /// <summary> /// An ado.net 2.0 way to mass insert records. This seems to be the fastest. /// http://www.codeproject.com/KB/cs/MultipleInsertsIn1dbTrip.aspx#_Toc196622241 /// </summary> private static void BatchBulkCopy() { // Get the DataTable DataTable dtInsertRows = GetDataTable(); using (SqlBulkCopy sbc = new SqlBulkCopy(connectionString, SqlBulkCopyOptions.KeepIdentity)) { sbc.DestinationTableName = "TBL_TEST_TEST"; // Number of records to be processed in one go sbc.BatchSize = 500000; // Map the Source Column from DataTabel to the Destination Columns in SQL Server 2005 Person Table // sbc.ColumnMappings.Add("ID", "ID"); sbc.ColumnMappings.Add("NAME", "NAME"); // Number of records after which client has to be notified about its status sbc.NotifyAfter = dtInsertRows.Rows.Count; // Event that gets fired when NotifyAfter number of records are processed. sbc.SqlRowsCopied += new SqlRowsCopiedEventHandler(sbc_SqlRowsCopied); // Finally write to server sbc.WriteToServer(dtInsertRows); sbc.Close(); } } This one seemed to go really fast and did not even need a SP( can you use SP with bulk copy? If you can would it be better?) BatchCopy had no problem with a 500,000 batch size.So again why make it smaller then the number of records you want to send? I found that with BatchCopy and 500,000 batch size it took only 5 seconds to complete. I then tried with a batch size of 1,000 and it only took 8 seconds. So much faster then the bulkinsert one above. Now I tried the other tutorial. USE [Test] GO /****** Object: StoredProcedure [dbo].[spTEST_InsertXMLTEST_TEST] Script Date: 05/19/2010 15:39:03 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO ALTER PROCEDURE [dbo].[spTEST_InsertXMLTEST_TEST](@UpdatedProdData nText) AS DECLARE @hDoc int exec sp_xml_preparedocument @hDoc OUTPUT,@UpdatedProdData INSERT INTO TBL_TEST_TEST(NAME) SELECT XMLProdTable.NAME FROM OPENXML(@hDoc, 'ArrayOfTBL_TEST_TEST/TBL_TEST_TEST', 2) WITH ( ID Int, NAME varchar(100) ) XMLProdTable EXEC sp_xml_removedocument @hDoc C# code. /// <summary> /// This is using linq to sql to make the table objects. /// It is then serailzed to to an xml document and sent to a stored proedure /// that then does a bulk insert(I think with OpenXML) /// http://www.codeproject.com/KB/linq/BulkOperations_LinqToSQL.aspx /// </summary> private static void LinqInsertXMLBatch() { using (TestDataContext db = new TestDataContext()) { TBL_TEST_TEST[] testRecords = new TBL_TEST_TEST[500000]; for (int count = 0; count < 500000; count++) { TBL_TEST_TEST testRecord = new TBL_TEST_TEST(); testRecord.NAME = "Name : " + count; testRecords[count] = testRecord; } StringBuilder sBuilder = new StringBuilder(); System.IO.StringWriter sWriter = new System.IO.StringWriter(sBuilder); XmlSerializer serializer = new XmlSerializer(typeof(TBL_TEST_TEST[])); serializer.Serialize(sWriter, testRecords); db.insertTestData(sBuilder.ToString()); } } So I like this because I get to use objects even though it is kinda redundant. I don't get how the SP works. Like I don't get the whole thing. I don't know if OPENXML has some batch insert under the hood but I do not even know how to take this example SP and change it to fit my tables since like I said I don't know what is going on. I also don't know what would happen if the object you have more tables in it. Like say I have a ProductName table what has a relationship to a Product table or something like that. In linq to sql you could get the product name object and make changes to the Product table in that same object. So I am not sure how to take that into account. I am not sure if I would have to do separate inserts or what. The time was pretty good for 500,000 records it took 52 seconds The last way of course was just using linq to do it all and it was pretty bad. /// <summary> /// This is using linq to sql to to insert lots of records. /// This way is slow as it uses no mass insert. /// Only tried to insert 50,000 records as I did not want to sit around till it did 500,000 records. /// http://www.codeproject.com/KB/linq/BulkOperations_LinqToSQL.aspx /// </summary> private static void LinqInsertAll() { using (TestDataContext db = new TestDataContext()) { db.CommandTimeout = 600; for (int count = 0; count < 50000; count++) { TBL_TEST_TEST testRecord = new TBL_TEST_TEST(); testRecord.NAME = "Name : " + count; db.TBL_TEST_TESTs.InsertOnSubmit(testRecord); } db.SubmitChanges(); } } I did only 50,000 records and that took over a minute to do. So I really narrowed it done to the linq to sql bulk insert way or bulk copy. I am just not sure how to do it when you have relationship for either way. I am not sure how they both stand up when doing updates instead of inserts as I have not gotten around to try it yet. I don't think I will ever need to insert/update more than 50,000 records at one type but at the same time I know I will have to do validation on records before inserting so that will slow it down and that sort of makes linq to sql nicer as your got objects especially if your first parsing data from a xml file before you insert into the database. Full C# code using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Xml.Serialization; using System.Data; using System.Data.SqlClient; namespace TestIQueryable { class Program { private static string connectionString = ""; static void Main(string[] args) { BatchInsert(); Console.WriteLine("done"); } /// <summary> /// This is using linq to sql to to insert lots of records. /// This way is slow as it uses no mass insert. /// Only tried to insert 50,000 records as I did not want to sit around till it did 500,000 records. /// http://www.codeproject.com/KB/linq/BulkOperations_LinqToSQL.aspx /// </summary> private static void LinqInsertAll() { using (TestDataContext db = new TestDataContext()) { db.CommandTimeout = 600; for (int count = 0; count < 50000; count++) { TBL_TEST_TEST testRecord = new TBL_TEST_TEST(); testRecord.NAME = "Name : " + count; db.TBL_TEST_TESTs.InsertOnSubmit(testRecord); } db.SubmitChanges(); } } /// <summary> /// This is using linq to sql to make the table objects. /// It is then serailzed to to an xml document and sent to a stored proedure /// that then does a bulk insert(I think with OpenXML) /// http://www.codeproject.com/KB/linq/BulkOperations_LinqToSQL.aspx /// </summary> private static void LinqInsertXMLBatch() { using (TestDataContext db = new TestDataContext()) { TBL_TEST_TEST[] testRecords = new TBL_TEST_TEST[500000]; for (int count = 0; count < 500000; count++) { TBL_TEST_TEST testRecord = new TBL_TEST_TEST(); testRecord.NAME = "Name : " + count; testRecords[count] = testRecord; } StringBuilder sBuilder = new StringBuilder(); System.IO.StringWriter sWriter = new System.IO.StringWriter(sBuilder); XmlSerializer serializer = new XmlSerializer(typeof(TBL_TEST_TEST[])); serializer.Serialize(sWriter, testRecords); db.insertTestData(sBuilder.ToString()); } } /// <summary> /// An ado.net 2.0 way to mass insert records. This seems to be the fastest. /// http://www.codeproject.com/KB/cs/MultipleInsertsIn1dbTrip.aspx#_Toc196622241 /// </summary> private static void BatchBulkCopy() { // Get the DataTable DataTable dtInsertRows = GetDataTable(); using (SqlBulkCopy sbc = new SqlBulkCopy(connectionString, SqlBulkCopyOptions.KeepIdentity)) { sbc.DestinationTableName = "TBL_TEST_TEST"; // Number of records to be processed in one go sbc.BatchSize = 500000; // Map the Source Column from DataTabel to the Destination Columns in SQL Server 2005 Person Table // sbc.ColumnMappings.Add("ID", "ID"); sbc.ColumnMappings.Add("NAME", "NAME"); // Number of records after which client has to be notified about its status sbc.NotifyAfter = dtInsertRows.Rows.Count; // Event that gets fired when NotifyAfter number of records are processed. sbc.SqlRowsCopied += new SqlRowsCopiedEventHandler(sbc_SqlRowsCopied); // Finally write to server sbc.WriteToServer(dtInsertRows); sbc.Close(); } } /// <summary> /// Another ado.net 2.0 way that uses a stored procedure to do a bulk insert. /// Seems slower then "BatchBulkCopy" way and it crashes when you try to insert 500,000 records in one go. /// http://www.codeproject.com/KB/cs/MultipleInsertsIn1dbTrip.aspx#_Toc196622241 /// </summary> private static void BatchInsert() { // Get the DataTable with Rows State as RowState.Added DataTable dtInsertRows = GetDataTable(); SqlConnection connection = new SqlConnection(connectionString); SqlCommand command = new SqlCommand("sp_BatchInsert", connection); command.CommandType = CommandType.StoredProcedure; command.UpdatedRowSource = UpdateRowSource.None; // Set the Parameter with appropriate Source Column Name command.Parameters.Add("@Name", SqlDbType.VarChar, 50, dtInsertRows.Columns[0].ColumnName); SqlDataAdapter adpt = new SqlDataAdapter(); adpt.InsertCommand = command; // Specify the number of records to be Inserted/Updated in one go. Default is 1. adpt.UpdateBatchSize = 500000; connection.Open(); int recordsInserted = adpt.Update(dtInsertRows); connection.Close(); } private static DataTable GetDataTable() { // You First need a DataTable and have all the insert values in it DataTable dtInsertRows = new DataTable(); dtInsertRows.Columns.Add("NAME"); for (int i = 0; i < 500000; i++) { DataRow drInsertRow = dtInsertRows.NewRow(); string name = "Name : " + i; drInsertRow["NAME"] = name; dtInsertRows.Rows.Add(drInsertRow); } return dtInsertRows; } static void sbc_SqlRowsCopied(object sender, SqlRowsCopiedEventArgs e) { Console.WriteLine("Number of records affected : " + e.RowsCopied.ToString()); } } }

Read the article

Developer Dashboard in SharePoint 2010

- by jcortez

Introducing the Developer Dashboard As a SharePoint developer (or IT Professional), how many times have you had the pleasure of figuring out why a particular page on your site is taking too long to render? I'm sure one of the techniques you have employed in troubleshooting is the process of elimination - removing individual web parts from the page hoping to identify which web part is misbehaving. One of the new features of SharePoint 2010 is the Developer Dashboard. This dashboard provides tracing and performance information that can be useful when you are trying to troubleshoot pages that are loading too slow. The Developer Dashboard is turned off by default and I'll go over 3 different ways to display it. Here is a screenshot of what the Developer Dashboard looks like when displayed at the bottom of the page: You can see on the left side the different events that fired during the page processing pipeline and how long these events took. This is where you will see individual web parts being processed and how long it took to complete (obviously the kind of processing depends on what the web part does). On the right side you would see the different database calls issued through the SharePoint Object Model to process the page. You will notice that each of these database queries are actually a hyperlink and clicking on it displays a pop-up window that shows the actual SQL Query Text, the Call Stack that triggered the database call, and the IO statistics of that query. Enabling the Developer Dashboard Option 1: Managed Code The Developer Dashboard is a farm-wide setting and the code above won't work if it is used within a web part hosted on any non-Central Admin site. The SPDeveloperDashboardLevel enum has three possible values: On, Off, and OnDemand. Setting it to On will always display the Developer Dashboard at the bottom of the page. Setting it Off will hide the Developer Dashboard. Setting it to OnDemand will add an icon at the top right corner of the page (see screenshot below) where a Site Collection Admin can toggle the display of the Developer Dashboard for a particular site collection. In my opinion, OnDemand is the best setting when troubleshooting a page or during development since a Site Collection Admin can turn it on or off and for a particular site only. The first cool thing about this is that the Site Collection Admin that turned it on will be the only one to see the Developer Dashboard output. Everyday users won't see the Developer Dashboard output even if it was turned on by a Site Collection Admin. If you need more flexibility on who gets to see the Developer Dashboard output, you can set the SPDeveloperDashboardSettings.RequiredPermissions to control which group of users will have the permission to see the output. Option 2: Using stsadm Using stsadm, you can run the following command to configure the Developer Dashboard: STSADM –o setproperty –pn developer-dashboard –pv OnDemand To successfully execute this command, be sure you that are running as a Farm Admin. Option 3: Using PowerShell For all scripts in SharePoint 2010, I prefer writing them as PowerShell scripts. Though the stsadm command is less verbose, the PowerShell equivalent is pretty straightforward and uses the SharePoint Object Model: You can of course parameterized the value that gets assigned to the DisplayLevel property so you can turn it On, Off or OnDemand depending on the parameter. Events and the Developer Dashboard Now, don't assume that all the code inside your web part or page will show up in the Developer Dashboard complete with all the great troubleshooting information. Only a finite set of events are monitored by default (for a web part it will events in the base web part class). Let's say you have a click event that could take some time, for example a web service call. And you want to include troubleshooting information for this event in the Developer Dashboard. Enter SPMonitoredScope which is also a new feature in SharePoint 2010. In SharePoint 2010, everything is executed within a "Monitored Scope". And each scope has a set of "Monitors" that measures and counts calls and timings which appears in the Developer Dashboard. Below is an example on how to get your custom code to get included in the Developer Dashboard by wrapping it inside a new monitored scope: The code above would include your new scope "My long web service call" into the Developer Dashboard and would log the time it took to complete processing. In my opinion, wrapping your custom code in a SPMonitoredScope is a SharePoint development best practice since it provides you visibility and a better understanding on the performance of your components.

Read the article

Non-Dom Element Event Binding with jQuery

- by Rick Strahl

Yesterday I had a short discussion with Dave Reed on Twitter regarding setting up fake ‘events’ on objects that are hookable. jQuery makes it real easy to bind events on DOM elements and with a little bit of extra work (that I didn’t know about) you can also set up binding to non-DOM element ‘event’ bindings. Assume for a second that you have a simple JavaScript object like this: var item = { sku: "wwhelp" , foo: function() { alert('orginal foo function'); } }; and you want to be notified when the foo function is called. You can use jQuery to bind the handler like this: $(item).bind("foo", function () { alert('foo Hook called'); } ); Binding alone won’t actually cause the handler to be triggered so when you call: item.foo(); you only get the ‘original’ message. In order to fire both the original handler and the bound event hook you have to use the .trigger() function: $(item).trigger("foo"); Now if you do the following complete sequence: var item = { sku: "wwhelp" , foo: function() { alert('orginal foo function'); } }; $(item).bind("foo", function () { alert('foo hook called'); } ); $(item).trigger("foo"); You’ll see the ‘hook’ message first followed by the ‘original’ message fired in succession. In other words, using this mechanism you can hook standard object functions and chain events to them in a way similar to the way you can do with DOM elements. The main difference is that the ‘event’ has to be explicitly triggered in order for this to happen rather than just calling the method directly. .trigger() relies on some internal logic that checks for event bindings on the object (attached via an expando property) which .trigger() searches for in its bound event list. Once the ‘event’ is found it’s called prior to execution of the original function. This is pretty useful as it allows you to create standard JavaScript objects that can act as event handlers and are effectively hookable without having to explicitly override event definitions with JavaScript function handlers. You get all the benefits of jQuery’s event methods including the ability to hook up multiple events to the same handler function and the ability to uniquely identify each specific event instance with post fix string names (ie. .bind("MyEvent.MyName") and .unbind("MyEvent.MyName") to bind MyEvent). Watch out for an .unbind() Bug Note that there appears to be a bug with .unbind() in jQuery that doesn’t reliably unbind an event and results in a elem.removeEventListener is not a function error. The following code demonstrates: var item = { sku: "wwhelp", foo: function () { alert('orginal foo function'); } }; $(item).bind("foo.first", function () { alert('foo hook called'); }); $(item).bind("foo.second", function () { alert('foo hook2 called'); }); $(item).trigger("foo"); setTimeout(function () { $(item).unbind("foo"); // $(item).unbind("foo.first"); // $(item).unbind("foo.second"); $(item).trigger("foo"); }, 3000); The setTimeout call delays the unbinding and is supposed to remove the event binding on the foo function. It fails both with the foo only value (both if assigned only as “foo” or “foo.first/second” as well as when removing both of the postfixed event handlers explicitly. Oddly the following that removes only one of the two handlers works: setTimeout(function () { //$(item).unbind("foo"); $(item).unbind("foo.first"); // $(item).unbind("foo.second"); $(item).trigger("foo"); }, 3000); this actually works which is weird as the code in unbind tries to unbind using a DOM method that doesn’t exist. <shrug> A partial workaround for unbinding all ‘foo’ events is the following: setTimeout(function () { $.event.special.foo = { teardown: function () { alert('teardown'); return true; } }; $(item).unbind("foo"); $(item).trigger("foo"); }, 3000); which is a bit cryptic to say the least but it seems to work more reliably. I can’t take credit for any of this – thanks to Dave Reed and Damien Edwards who pointed out some of these behaviors. I didn’t find any good descriptions of the process so thought it’d be good to write it down here. Hope some of you find this helpful.© Rick Strahl, West Wind Technologies, 2005-2010Posted in jQuery

Read the article

Getting the innermost .NET Exception

- by Rick Strahl

Here's a trivial but quite useful function that I frequently need in dynamic execution of code: Finding the innermost exception when an exception occurs, because for many operations (for example Reflection invocations or Web Service calls) the top level errors returned can be rather generic. A good example - common with errors in Reflection making a method invocation - is this generic error: Exception has been thrown by the target of an invocation In the debugger it looks like this: In this case this is an AJAX callback, which dynamically executes a method (ExecuteMethod code) which in turn calls into an Amazon Web Service using the old Amazon WSE101 Web service extensions for .NET. An error occurs in the Web Service call and the innermost exception holds the useful error information which in this case points at an invalid web.config key value related to the System.Net connection APIs. The "Exception has been thrown by the target of an invocation" error is the Reflection APIs generic error message that gets fired when you execute a method dynamically and that method fails internally. The messages basically says: "Your code blew up in my face when I tried to run it!". Which of course is not very useful to tell you what actually happened. If you drill down the InnerExceptions eventually you'll get a more detailed exception that points at the original error and code that caused the exception. In the code above the actually useful exception is two innerExceptions down. In most (but not all) cases when inner exceptions are returned, it's the innermost exception that has the information that is really useful. It's of course a fairly trivial task to do this in code, but I do it so frequently that I use a small helper method for this: /// <summary> /// Returns the innermost Exception for an object /// </summary> /// <param name="ex"></param> /// <returns></returns> public static Exception GetInnerMostException(Exception ex) { Exception currentEx = ex; while (currentEx.InnerException != null) { currentEx = currentEx.InnerException; } return currentEx; } This code just loops through all the inner exceptions (if any) and assigns them to a temporary variable until there are no more inner exceptions. The end result is that you get the innermost exception returned from the original exception. It's easy to use this code then in a try/catch handler like this (from the example above) to retrieve the more important innermost exception: object result = null; string stringResult = null; try { if (parameterList != null) // use the supplied parameter list result = helper.ExecuteMethod(methodToCall,target, parameterList.ToArray(), CallbackMethodParameterType.Json,ref attr); else // grab the info out of QueryString Values or POST buffer during parameter parsing // for optimization result = helper.ExecuteMethod(methodToCall, target, null, CallbackMethodParameterType.Json, ref attr); } catch (Exception ex) { Exception activeException = DebugUtils.GetInnerMostException(ex); WriteErrorResponse(activeException.Message, ( HttpContext.Current.IsDebuggingEnabled ? ex.StackTrace : null ) ); return; } Another function that is useful to me from time to time is one that returns all inner exceptions and the original exception as an array: /// <summary> /// Returns an array of the entire exception list in reverse order /// (innermost to outermost exception) /// </summary> /// <param name="ex">The original exception to work off</param> /// <returns>Array of Exceptions from innermost to outermost</returns> public static Exception[] GetInnerExceptions(Exception ex) { List<Exception> exceptions = new List<Exception>(); exceptions.Add(ex); Exception currentEx = ex; while (currentEx.InnerException != null) { exceptions.Add(ex); } // Reverse the order to the innermost is first exceptions.Reverse(); return exceptions.ToArray(); } This function loops through all the InnerExceptions and returns them and then reverses the order of the array returning the innermost exception first. This can be useful in certain error scenarios where exceptions stack and you need to display information from more than one of the exceptions in order to create a useful error message. This is rare but certain database exceptions bury their exception info in mutliple inner exceptions and it's easier to parse through them in an array then to manually walk the exception stack. It's also useful if you need to log errors and want to see the all of the error detail from all exceptions. None of this is rocket science, but it's useful to have some helpers that make retrieval of the critical exception info trivial. Resources DebugUtils.cs utility class in the West Wind Web Toolkit© Rick Strahl, West Wind Technologies, 2005-2011Posted in CSharp .NET

Read the article

Workaround for datadude deployment bug - NullReferenceException

- by jamiet

I have come across a bug in Visual Studio 2010 Database Projects (aka datadude aka DPro aka Visual Studio Database Development Tools aka Visual Studio Team Edition for Database Professionals aka Juneau aka SQL Server Data Tools) that other people may encounter so, for the purposes of googling, I'm writing this blog post about it. Through my own googling I discovered that a Connect bug had already been raised about it (VS2010 Database project deploy - “SqlDeployTask” task failed unexpectedly, NullReferenceException), and coincidentally enough it was raised by my former colleague Tom Hunter (whom I have mentioned here before as the superhuman Tom Hunter) although it has not (at this time) received a reply from Microsoft. Tom provided a repro, namely that this syntactically valid function definition: CREATE FUNCTION [dbo].[Function1]()RETURNS TABLEASRETURN ( WITH cte AS ( SELECT 1 AS [c1] FROM [$(Database3)].[dbo].[Table1] ) SELECT 1 AS [c1] FROM cte) would produce this nasty unhelpful error upon deployment: C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v10.0\TeamData\Microsoft.Data.Schema.TSqlTasks.targets(120,5): Error MSB4018: The "SqlDeployTask" task failed unexpectedly.System.NullReferenceException: Object reference not set to an instance of an object. at Microsoft.Data.Schema.Sql.SchemaModel.SqlModelComparerBase.VariableSubstitution(SqlScriptProperty propertyValue, IDictionary`2 variables, Boolean& isChanged) at Microsoft.Data.Schema.Sql.SchemaModel.SqlModelComparerBase.ArePropertiesEqual(IModelElement source, IModelElement target, ModelPropertyClass propertyClass, ModelComparerConfiguration configuration) at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareProperties(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, ModelComparisonChangeDefinition changes) at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareElementsWithoutCompareName(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, Boolean parentExplicitlyIncluded, Boolean compareElementOnly, ModelComparisonResult result, ModelComparisonChangeDefinition changes) at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareElementsWithSameType(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, ModelComparisonResult result, Boolean ignoreComparingName, Boolean parentExplicitlyIncluded, Boolean compareElementOnly, Boolean compareFromRootElement, ModelComparisonChangeDefinition& changes) at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareChildren(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, Boolean parentExplicitlyIncluded, Boolean compareParentElementOnly, ModelComparisonResult result, ModelComparisonChangeDefinition changes, Boolean isComposing) at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareElementsWithoutCompareName(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, Boolean parentExplicitlyIncluded, Boolean compareElementOnly, ModelComparisonResult result, ModelComparisonChangeDefinition changes) at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareElementsWithSameType(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, ModelComparisonResult result, Boolean ignoreComparingName, Boolean parentExplicitlyIncluded, Boolean compareElementOnly, Boolean compareFromRootElement, ModelComparisonChangeDefinition& changes) at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareChildren(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, Boolean parentExplicitlyIncluded, Boolean compareParentElementOnly, ModelComparisonResult result, ModelComparisonChangeDefinition changes, Boolean isComposing) at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareElementsWithoutCompareName(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, Boolean parentExplicitlyIncluded, Boolean compareElementOnly, ModelComparisonResult result, ModelComparisonChangeDefinition changes) at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareElementsWithSameType(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, ModelComparisonResult result, Boolean ignoreComparingName, Boolean parentExplicitlyIncluded, Boolean compareElementOnly, Boolean compareFromRootElement, ModelComparisonChangeDefinition& changes) at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareAllElementsForOneType(ModelElementClass type, ModelComparerConfiguration configuration, ModelComparisonResult result, Boolean compareOrphanedElements) at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareStore(ModelStore source, ModelStore target, ModelComparerConfiguration configuration) at Microsoft.Data.Schema.Build.SchemaDeployment.CompareModels() at Microsoft.Data.Schema.Build.SchemaDeployment.PrepareBuildPlan() at Microsoft.Data.Schema.Build.SchemaDeployment.Execute(Boolean executeDeployment) at Microsoft.Data.Schema.Build.SchemaDeployment.Execute() at Microsoft.Data.Schema.Tasks.DBDeployTask.Execute() at Microsoft.Build.BackEnd.TaskExecutionHost.Microsoft.Build.BackEnd.ITaskExecutionHost.Execute() at Microsoft.Build.BackEnd.TaskBuilder.ExecuteInstantiatedTask(ITaskExecutionHost taskExecutionHost, TaskLoggingContext taskLoggingContext, TaskHost taskHost, ItemBucket bucket, TaskExecutionMode howToExecuteTask, Boolean& taskResult) Done executing task "SqlDeployTask" -- FAILED. Done building target "DspDeploy" in project "Lloyds.UKTax.DB.UKtax.dbproj" -- FAILED. Done executing task "CallTarget" -- FAILED.Done building target "DBDeploy" in project It turns out there are a certain set of circumstances that need to be met for this error to occur: The object being deployed is an inline function (may also exist for multistatement and scalar functions - I haven't tested that) That object includes SQLCMD variable references The object has already been deployed successfully Just to reiterate that last bullet point, the error does not occur when you deploy the function for the first time, only on the subsequent deployment. Luckily I have a direct line into a guy on the development team so I fired off an email on Friday evening and today (Monday) I received a reply back telling me that there is a simple fix, one simply has to remove the parentheses that wrap the SQL statement. So, in the case of Tom's repro, the function definition simpy has to be changed to: CREATE FUNCTION [dbo].[Function1]()RETURNS TABLEASRETURN --( WITH cte AS ( SELECT 1 AS [c1] FROM [$(Database3)].[dbo].[Table1] ) SELECT 1 AS [c1] FROM cte--) I have commented out the offending parentheses rather than removing them just to emphasize the point. Thereafter the function will deploy fine. I tested this out on my own project this morning and can confirm that this fix does indeed work. I have been told that the bug CAN be reproduced in the Release Candidate (RC) 0 build of SQL Server Data Tools in SQL Server 2010 so am hoping that a fix makes it in for the Release-To-Manufacturing (RTM) build. Hope this helps @jamiet

Read the article

Silverlight 5 – What’s New? (Including Screenshots & Code Snippets)

- by mbcrump

Silverlight 5 is coming next year (2011) and this blog post will tell you what you need to know before the beta ships. First, let me address people saying that it is dead after PDC 2010. I believe that it’s best to see what the market is doing, not the vendor. Below is a list of companies that are developing Silverlight 4 applications shown during the Silverlight Firestarter. Some of the companies have shipped and some haven’t. It’s just great to see the actual company names that are working on Silverlight instead of “people are developing for Silverlight”. The next thing that I wanted to point out was that HTML5, WPF and Silverlight can co-exist. In case you missed Scott Gutherie’s keynote, they actually had a slide with all three stacked together. This shows Microsoft will be heavily investing in each technology. Even I, a Silverlight developer, am reading Pro HTML5. Microsoft said that according to the Silverlight Feature Voting site, 21k votes were entered. Microsoft has implemented about 70% of these votes in Silverlight 5. That is an amazing number, and I am crossing my fingers that Microsoft bundles Silverlight with Windows 8. Let’s get started… what’s new in Silverlight 5? I am going to show you some great application and actual code shown during the Firestarter event. Media Hardware Video Decode – Instead of using CPU to decode, we will offload it to GPU. This will allow netbooks, etc to play videos. Trickplay – Variable Speed Playback – Pitch Correction (If you speed up someone talking they won’t sound like a chipmunk). Power Management – Less battery when playing video. Screensavers will no longer kick in if watching a video. If you pause a video then screensaver will kick in. Remote Control Support – This will allow users to control playback functions like Pause, Rewind and Fastforward. IIS Media Services 4 has shipped and now supports Azure. Data Binding Layout Transitions – Just with a few lines of XAML you can create a really rich experience that is not using Storyboards or animations. RelativeSource FindAncestor – Ancestor RelativeSource bindings make it much easier for a DataTemplate to bind to a property on a container control. Custom Markup Extensions – Markup extensions allow code to be run at XAML parse time for both properties and event handlers. This is great for MVVM support. Changing Styles during Runtime By Binding in Style Setters – Changing Styles at runtime used to be a real pain in Silverlight 4, now it’s much easier. Binding in style setters allows bindings to reference other properties. XAML Debugging – Below you can see that we set a breakpoint in XAML. This shows us exactly what is going on with our binding. WCF & RIA Services WS-Trust Support – Taken from Wikipedia: WS-Trust is a WS-* specification and OASIS standard that provides extensions to WS-Security, specifically dealing with the issuing, renewing, and validating of security tokens, as well as with ways to establish, assess the presence of, and broker trust relationships between participants in a secure message exchange. You can reduce network latency by using a background thread for networking. Supports Azure now. Text and Printing Improved text clarity that enables better text rendering. Multi-column text flow, Character tracking and leading support, and full OpenType font support. Includes a new Postscript Vector Printing API that provides control over what you print . Pivot functionality baked into Silverlight 5 SDK. Graphics Immediate mode graphics support that will enable you to use the GPU and 3D graphics supports. Take a look at what was shown in the demos below. 1) 3D view of the Earth – not really a real-world application though. A doctor’s portal. This demo really stood out for me as it shows what we can do with the 3D / GPU support. Out of Browser OOB applications can now create and manage childwindows as shown in the screenshot below. Trusted OOB applications can use P/Invoke to call Win32 APIs and unmanaged libraries. Enterprise Group Policy Support allow enterprises to lock down or up the sandbox capabilities of Silverlight 5 applications. In this demo, he tore the “notes” off of the application and it appeared in a new window. See the black arrow below. In this demo, he connected a USB Device which fired off a local Win32 application that provided the data off the USB stick to Silverlight. Another demo of a Silverlight 5 application exporting data right into Excel running inside of browser. Testing They demoed Coded UI, which is available now in the Visual Studio Feature Pack 2. This will allow you to create automated testing without writing any code manually. Performance: Microsoft has worked to improve the Silverlight startup time. Silverlight 5 provides 64-bit browser support. Silverlight 5 also provides IE9 Hardware acceleration. I am looking forward to Silverlight 5 and I hope you are too. Thanks for reading and I hope you visit again soon. Subscribe to my feed CodeProject

Read the article

Task-It Webinar - Source Code

Last week I presented a webinar called "Building a real-world application with RadControls for Silverlight 4". For those that didn't get to see the webinar, you can view it here: Building a read-world application with RadControls for Silverlight 4 Since the webinar I've received several requests asking if I could post the source code for the simple application I showed demonstrating some of the techniques used in the development of Task-It, such as MVVM, Commands and Internationalization. This source code is now available for downloadhere. After downloading the source: Extract it to the location of your choice on your hard-drive Open the solution Right-click ModuleProject.Web and selecte 'Set as StartUp Project'. Right-click ProjectTestPage.aspx and selected 'Set as Start Page' Create a database in SQL Server called WebinarProject. Navigate to the Database folder under the WebinarProject directory and run the .sql script against your WebinarProject database. The last two steps are necessary only for the Tasks page to work properly (using WCF RIA Services). Now some notes about each page: Code-behind This is not the way I recommend coding a line-of-business application in Silverlight, but simply wanted to show how the code-behind approach would look. Command This page introduces MVVM and Commands. You'll notice in the XAML that the Command property of theRadMenuItem and the Button are both bound to a SaveCommand. That comes from the view model. If you look in the code- behind of the user control you'll see that an instance of a CommandViewModel is instantiated and set as the DataContext of the UserControl.There is also a listener for the view model's SaveCompleted event. When this is fired, it tells the view (UserControl) to display the MessageBox. Internationalization This sample is similar to the previous one, but instead of using hard-coded strings in the UI, the strings are obtained via binding toview model properties. The view model gets the strings from the .resx files (Strings.resx or Strings.de.resx) under Assets/Resources. If you uncomment the call to ShowGerman() in App.xaml.cs's Application_Startup method and re-run the application, you will see the UI in German. Note that this code, which sets the CurrentCulture and CurrentUICulture on the current thread to "de" (German) is for testing purposes only. RadWindow Once again, very similar to the previous example.The difference is that we are now using a RadWindow to display the 'Saved' message instead of a MessageBox. The advantage here is that we do not have to hold on to a reference to the view model in our code behind so that we can get the 'Saved' message from it. The RadWindow's DataContext is now also bound to the view model, so within its XAML we can bind directly to properties in the view model. Much nicer, and cleaner. One other thing I introduced in this example is the use of spacer Rectangles. Rather than setting a width and/or height on the rectangles for spacing, I am now referencing a style in my ResourceDictionary called StandardSpacerStyle. I like doing this better than using margins or padding because now I have a reusable way to create space between elements, the Rectangle does not show (because I have not set its Fill color), and I can change my spacing throughout the user interface in one place if I'd like. Tasks This page is quite a bit different than the other four. It is a very simple, stripped-down version of the Tasks page in the Task-It application. The Tasks.xaml UserControl has a ContentControl, and the Content of that control is set based on whether we are looking at the list of tasks or editing a task. So it displays one of two child UserControls, which are called List and Details. List has the RadGridView, Details has the form. In the code-behind of the Tasks UserControl I am once again setting its DataContext to a view model class. The nice thing is, whichever child UserControl is being displayed (List or Details) inherits its DataContext from its parent control (Tasks), so I do not have to explicitly set it. The List UserControl simply displays a RadGridView whose ItemsSource is bound to a property in the view model called Tasks, and its SelectedItem property is bound to a property in the view model called SelectedItem. The SelectedItem binding must be TwoWay so that the view is notified when the SelectedItem changes in the view model, and the view model is notified when something changes in the view (like when a user changes the Name and/or DueDate in the form). You'll also notice that the form's TextBox and RadDatePicker are also TwoWay bound to the SelectedItem property in the view model. You can experiment with the binding by removing TwoWay and see how changes in the form do not show up in the RadGridView. So here we have an example of two different views (List and Details) that are both bound to the same view model...and actually, so is the Tasks UserControl, so it is really three views. WCF RIA Services By the way, I am using WCF RIA Services to retrieve data for the RadGridView and save the data when the user clicks the Save button in the form. I created a really simple ADO.NET Entity Data Model in WebinarProject.Web called DataModel.edmx. I also created a simple Domain Data Service called DataService that has methods for retrieving data, inserting, updating and deleting. However I am only using the retrieval and update methods in this sample. Note that I do not currently have any validation in place on the form, as I wanted to keep the sample as simple as possible. Wrap up Technically, I should move the calls to WCF RIA Services out of the view model and put them into a separate layer, but this works for now, and that is a topic for another day! Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

FireFox 6 Super Slow? Cache Settings Corruption

- by Rick Strahl

For those of you that follow me on Twitter, you've probably seen some of my tweets regarding major performance problems I've seen with the install of FireFox 6.0. FireFox 6.0 was released a couple of weeks ago and is treated as a 'force feed' update for FireFox 5.0. I'm not sure what the deal is with this braindead versioning that Mozilla is doing with major version releases coming out, what now every other month? Seriously that's retarded especially given the limited number of new features these releases bring, and the upgrade pain for plug-ins that the major version release causes. Anyway, after the FireFox updater bugged me long enough I finally gave in last week and updated to FireFox 6. Immediately after install I noticed terrible performance. Everything was running at a snail's pace with Web pages loading slowly and most content actually slowly 'painting' the page. A typical sign of content downloading slowly. However these are pages that should be mostly cached on my system and even repeated accesses ran just as slow. Just for a reality check I ran the same sites in Chrome (blazing fast) and IE (fast enough :-)) but FireFox - dog on a stick. Why so slow Boss? While complaining lots of people recommended to ditch FireFox - use Chrome, yada yada yada. Yeah, Chrome is fast and getting better but I have a number of plug-ins that I use in FF that I can't easily give up. So I suffered and started looking around more closely at what was happening. The first thing I noticed when accessing pages was that I continually saw accesses to the Google CDN downloading jQuery and jQuery UI. UI especially is pretty heavy in size and currently I'm in a location with a fairly slow IP connection where large files are a bit of an issue. However, seeing the CDN urls pop up repeatedly raised a flag with me. That stuff should be caching and it looked like each and every hit was reloading these scripts and various images over and over again. Fired up FireBug and sure enough I saw something like this on a repeated hit to my blog: Those two highlights are jquery and the main CSS file for the site and both are being loaded fully and taking a while to load. However, since this page had been loaded before, these items should be cached and show 304 requests instead of the full HTTP requests returning 200 result codes. In short it looked like FireFox was not caching ANY content at all and constantly reloading all page resources. No wonder things were running dog slow. Once I realized what the problem was I took a look in the about:config settings and lo and behold a bunch of the cache settings were set to not cache: In my case ALL the main cache flags were set to false for some reason that I can't figure out. It appears that after the FireFox 6 update these flags somehow mysteriously changed and performance took a nose dive. Switching the .enable flags back to true and resetting all the cache settings tote default reverted performance back to the way it's supposed to be: reasonably fast and snappy as soon as content is cached and accessed again from cache. I try not to muck with the about:config settings much (other than turning off the IPV6 option) but when there are problems access to these features can be really nice. However, I treat this as a last resort so it took me quite some time before I started looking through ALL the settings. This takes a while, not knowing what I was looking for exactly. If Web load performance is slow it's a good idea to check the cache settings. I have no idea what hosed these settings for me - I certainly didn't explicitly set them in about:config and while in FireFox's Options dialog I didn't see any option that would affect global caching like this, so this remains a mystery to me. Anyway, I hope that this is helpful to some, in case some of you end up running into a similar issue.© Rick Strahl, West Wind Technologies, 2005-2011Posted in FireFox Tweet (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

Advanced donut caching: using dynamically loaded controls

- by DigiMortal

Yesterday I solved one caching problem with local community portal. I enabled output cache on SharePoint Server 2007 to make site faster. Although caching works fine I needed to do some additional work because there are some controls that show different content to different users. In this example I will show you how to use “donut caching” with user controls – powerful way to drive some content around cache. About donut caching Donut caching means that although you are caching your content you have some holes in it so you can still affect the output that goes to user. By example you can cache front page on your site and still show welcome message that contains correct user name. To get better idea about donut caching I suggest you to read ScottGu posting Tip/Trick: Implement "Donut Caching" with the ASP.NET 2.0 Output Cache Substitution Feature. Basically donut caching uses ASP.NET substitution control. In output this control is replaced by string you return from static method bound to substitution control. Again, take a look at ScottGu blog posting I referred above. Problem If you look at Scott’s example it is pretty plain and easy by its output. All it does is it writes out current user name as string. Here are examples of my login area for anonymous and authenticated users: It is clear that outputting mark-up for these views as string is pretty lame to implement in code at string level. Every little change in design will end up with new version of controls library because some parts of design “live” there. Solution: using user controls I worked out easy solution to my problem. I used cache substitution and user controls together. I have three user controls: LogInControl – this is the proxy control that checks which “real” control to load. AnonymousLogInControl – template and logic for anonymous users login area. AuthenticatedLogInControl – template and logic for authenticated users login area. This is the control we render for each user separately because it contains user name and user profile fill percent. Anonymous control is not very interesting because it is only about keeping mark-up in separate file. Interesting parts are LogInControl and AuthenticatedLogInControl. Creating proxy control The first thing was to create control that has substitution area where “real” control is loaded. This proxy control should also be available to decide which control to load. The definition of control is very primitive. <%@ Control EnableViewState="false" Inherits="MyPortal.Profiles.LogInControl" %> <asp:Substitution runat="server" MethodName="ShowLogInBox" /> But code is a little bit tricky. Based on current user instance we decide which login control to load. Then we create page instance and load our control through it. When control is loaded we will call DataBind() method. In this method we evaluate all fields in loaded control (it was best choice as Load and other events will not be fired). Take a look at the code. public static string ShowLogInBox(HttpContext context) { var user = SPContext.Current.Web.CurrentUser; string controlName; if (user != null) controlName = "AuthenticatedLogInControl.ascx"; else controlName = "AnonymousLogInControl.ascx"; var path = "~/_controltemplates/" + controlName; var output = new StringBuilder(10000); using(var page = new Page()) using(var ctl = page.LoadControl(path)) using(var writer = new StringWriter(output)) using(var htmlWriter = new HtmlTextWriter(writer)) { ctl.DataBind(); ctl.RenderControl(htmlWriter); } return output.ToString(); } When control is bound to data we ask to render it its contents to StringBuilder. Now we have the output of control as string and we can return it from our method. Of course, notice how correct I am with resources disposing. :) The method that returns contents for substitution control is static method that has no connection with control instance because hen page is read from cache there are no instances of controls available. Conclusion As you saw it was not very hard to use donut caching with user controls. Instead of writing mark-up of controls to static method that is bound to substitution control we can still use our user controls.

Read the article

Implementing an Interceptor Using NHibernate’s Built In Dynamic Proxy Generator

- by Ricardo Peres

NHibernate 3.2 came with an included proxy generator, which means there is no longer the need – or the possibility, for that matter – to choose Castle DynamicProxy, LinFu or Spring. This is actually a good thing, because it means one less assembly to deploy. Apparently, this generator was based, at least partially, on LinFu. As there are not many tutorials out there demonstrating it’s usage, here’s one, for demonstrating one of the most requested features: implementing INotifyPropertyChanged. This interceptor, of course, will still feature all of NHibernate’s functionalities that you are used to, such as lazy loading, and such. We will start by implementing an NHibernate interceptor, by inheriting from the base class NHibernate.EmptyInterceptor. This class does not do anything by itself, but it allows us to plug in behavior by overriding some of its methods, in this case, Instantiate: 1: public class NotifyPropertyChangedInterceptor : EmptyInterceptor 2: { 3: private ISession session = null; 4: 5: private static readonly ProxyFactory factory = new ProxyFactory(); 6: 7: public override void SetSession(ISession session) 8: { 9: this.session = session; 10: base.SetSession(session); 11: } 12: 13: public override Object Instantiate(String clazz, EntityMode entityMode, Object id) 14: { 15: Type entityType = Type.GetType(clazz); 16: IProxy proxy = factory.CreateProxy(entityType, new _NotifyPropertyChangedInterceptor(), typeof(INotifyPropertyChanged)) as IProxy; 17: 18: _NotifyPropertyChangedInterceptor interceptor = proxy.Interceptor as _NotifyPropertyChangedInterceptor; 19: interceptor.Proxy = this.session.SessionFactory.GetClassMetadata(entityType).Instantiate(id, entityMode); 20: 21: this.session.SessionFactory.GetClassMetadata(entityType).SetIdentifier(proxy, id, entityMode); 22: 23: return (proxy); 24: } 25: } Then we need a class that implements the NHibernate dynamic proxy behavior, let’s place it inside our interceptor, because it will only need to be used there: 1: class _NotifyPropertyChangedInterceptor : NHibernate.Proxy.DynamicProxy.IInterceptor 2: { 3: private PropertyChangedEventHandler changed = delegate { }; 4: 5: public Object Proxy 6: { 7: get; 8: set;} 9: 10: #region IInterceptor Members 11: 12: public Object Intercept(InvocationInfo info) 13: { 14: Boolean isSetter = info.TargetMethod.Name.StartsWith("set_") == true; 15: Object result = null; 16: 17: if (info.TargetMethod.Name == "add_PropertyChanged") 18: { 19: PropertyChangedEventHandler propertyChangedEventHandler = info.Arguments[0] as PropertyChangedEventHandler; 20: this.changed += propertyChangedEventHandler; 21: } 22: else if (info.TargetMethod.Name == "remove_PropertyChanged") 23: { 24: PropertyChangedEventHandler propertyChangedEventHandler = info.Arguments[0] as PropertyChangedEventHandler; 25: this.changed -= propertyChangedEventHandler; 26: } 27: else 28: { 29: result = info.TargetMethod.Invoke(this.Proxy, info.Arguments); 30: } 31: 32: if (isSetter == true) 33: { 34: String propertyName = info.TargetMethod.Name.Substring("set_".Length); 35: this.changed(this.Proxy, new PropertyChangedEventArgs(propertyName)); 36: } 37: 38: return (result); 39: } 40: 41: #endregion 42: } What this does for every interceptable method (those who are either virtual or from the INotifyPropertyChanged) is: For methods that came from the INotifyPropertyChanged interface, add_PropertyChanged and remove_PropertyChanged (yes, events are methods ), we add an implementation that adds or removes the event handlers to the delegate which we declared as changed; For all the others, we direct them to the place where they are actually implemented, which is the Proxy field; If the call is setting a property, it fires afterwards the PropertyChanged event. In order to use this, we need to add the interceptor to the Configuration before building the ISessionFactory: 1: using (ISessionFactory factory = cfg.SetInterceptor(new NotifyPropertyChangedInterceptor()).BuildSessionFactory()) 2: { 3: using (ISession session = factory.OpenSession()) 4: using (ITransaction tx = session.BeginTransaction()) 5: { 6: Customer customer = session.Get<Customer>(100); //some id 7: INotifyPropertyChanged inpc = customer as INotifyPropertyChanged; 8: inpc.PropertyChanged += delegate(Object sender, PropertyChangedEventArgs e) 9: { 10: //fired when a property changes 11: }; 12: customer.Address = "some other address"; //will raise PropertyChanged 13: customer.RecentOrders.ToList(); //will trigger the lazy loading 14: } 15: } Any problems, questions, do drop me a line!

Read the article

Allowing Access to HttpContext in WCF REST Services

- by Rick Strahl

If you’re building WCF REST Services you may find that WCF’s OperationContext, which provides some amount of access to Http headers on inbound and outbound messages, is pretty limited in that it doesn’t provide access to everything and sometimes in a not so convenient manner. For example accessing query string parameters explicitly is pretty painful: [OperationContract] [WebGet] public string HelloWorld() { var properties = OperationContext.Current.IncomingMessageProperties; var property = properties[HttpRequestMessageProperty.Name] as HttpRequestMessageProperty; string queryString = property.QueryString; var name = StringUtils.GetUrlEncodedKey(queryString,"Name"); return "Hello World " + name; } And that doesn’t account for the logic in GetUrlEncodedKey to retrieve the querystring value. It’s a heck of a lot easier to just do this: [OperationContract] [WebGet] public string HelloWorld() { var name = HttpContext.Current.Request.QueryString["Name"] ?? string.Empty; return "Hello World " + name; } Ok, so if you follow the REST guidelines for WCF REST you shouldn’t have to rely on reading query string parameters manually but instead rely on routing logic, but you know what: WCF REST is a PITA anyway and anything to make things a little easier is welcome. To enable the second scenario there are a couple of steps that you have to take on your service implementation and the configuration file. Add aspNetCompatibiltyEnabled in web.config Fist you need to configure the hosting environment to support ASP.NET when running WCF Service requests. This ensures that the ASP.NET pipeline is fired up and configured for every incoming request. <system.serviceModel> <serviceHostingEnvironment aspNetCompatibilityEnabled="true" multipleSiteBindingsEnabled="true" /> </system.serviceModel> Markup your Service Implementation with AspNetCompatibilityRequirements Attribute Next you have to mark up the Service Implementation – not the contract if you’re using a separate interface!!! – with the AspNetCompatibilityRequirements attribute: [ServiceContract(Namespace = "RateTestService")] [AspNetCompatibilityRequirements(RequirementsMode = AspNetCompatibilityRequirementsMode.Allowed)] public class RestRateTestProxyService Typically you’ll want to use Allowed as the preferred option. The other options are NotAllowed and Required. Allowed will let the service run if the web.config attribute is not set. Required has to have it set. All these settings determine whether an ASP.NET host AppDomain is used for requests. Once Allowed or Required has been set on the implemented class you can make use of the ASP.NET HttpContext object. When I allow for ASP.NET compatibility in my WCF services I typically add a property that exposes the Context and Request objects a little more conveniently: public HttpContext Context { get { return HttpContext.Current; } } public HttpRequest Request { get { return HttpContext.Current.Request; } } While you can also access the Response object and write raw data to it and manipulate headers THAT is probably not such a good idea as both your code and WCF will end up writing into the output stream. However it might be useful in some situations where you need to take over output generation completely and return something completely custom. Remember though that WCF REST DOES actually support that as well with Stream responses that essentially allow you to return any kind of data to the client so using Response should really never be necessary. Should you or shouldn’t you? WCF purists will tell you never to muck with the platform specific features or the underlying protocol, and if you can avoid it you definitely should avoid it. Querystring management in particular can be handled largely with Url Routing, but there are exceptions of course. Try to use what WCF natively provides – if possible as it makes the code more portable. For example, if you do enable ASP.NET Compatibility you won’t be able to self host a WCF REST service. At the same time realize that especially in WCF REST there are number of big holes or access to some features are a royal pain and so it’s not unreasonable to access the HttpContext directly especially if it’s only for read-only access. Since everything in REST works of URLS and the HTTP protocol more control and easier access to HTTP features is a key requirement to building flexible services. It looks like vNext of the WCF REST stuff will feature many improvements along these lines with much deeper native HTTP support that is often so useful in REST applications along with much more extensibility that allows for customization of the inputs and outputs as data goes through the request pipeline. I’m looking forward to this stuff as WCF REST as it exists today still is a royal pain (in fact I’m struggling with a mysterious version conflict/crashing error on my machine that I have not been able to resolve – grrrr…).© Rick Strahl, West Wind Technologies, 2005-2011Posted in ASP.NET AJAX WCF

Read the article

Screen (command-line program) bug?

- by VioletCrime

fired up my Minecraft server again after about a year off. My server used to run 11.04, which has since been upgraded to 12.04; I lost my management scripts in the upgrade (thought I'd backed up the user's home directory), but whatever, I enjoy developing stuff like that anyways. However, this time around, I'm running into issues. I start the Minecraft server using a detached screen, however the script is unable to 'stuff' commands into the screen instance until I attach to the screen then detach again? Once I do that, I can stuff anything I want into the server's terminal using the -X option, until I stop/start the server again, then I have to reattach and detach in order to restore functionality? Here's the manager script: #!/bin/bash #Name of the screen housing the server (set with the -S flag at startup) SCREENNAME=minecraft1 #Name of the folder housing the Minecraft world FOLDERNAME=world1 startServer (){ if screen -list | grep "$SCREENNAME" > /dev/null then echo "Cannot start Minecraft server; it is already running!" else screen -dmS $SCREENNAME java -Xmx1024M -Xms1024M -jar minecraft_server.jar sleep 2 if screen -list | grep "$SCREENNAME" > /dev/null then echo "Minecraft server started; happy mining!" else echo "ERROR: Minecraft server failed to start!" fi fi; } stopServer (){ if screen -list | grep "$SCREENNAME" > /dev/null then echo "Server is running. Giving a 1-minute warning." screen -S $SCREENNAME -X stuff "/say Shutting down (halt) in one minute." screen -S $SCREENNAME -X stuff $'\015' sleep 45 screen -S $SCREENNAME -X stuff "/say Shutting down (halt) in 15 seconds." screen -S $SCREENNAME -X stuff $'\015' sleep 15 screen -S $SCREENNAME -X stuff "/stop" screen -S $SCREENNAME -X stuff $'\015' else echo "Server is not running; nothing to stop." fi; } stopServerNow (){ if screen -list | grep "$SCREENNAME" > /dev/null then echo "Server is running. Giving a 5-second warning." screen -S $SCREENNAME -X stuff "/say EMERGENCY SHUTDOWN! 5 seconds to halt." screen -S $SCREENNAME -X stuff $'\015' sleep 5 screen -S $SCREENNAME -X stuff "/stop" screen -S $SCREENNAME -X stuff $'\015' else echo "Server is not running; nothing to stop." fi; } restartServer (){ if screen -list | grep "$SCREENNAME" > /dev/null then echo "Server is running. Giving a 1-minute warning." screen -S $SCREENNAME -X stuff "/say Shutting down (restart) in one minute." screen -S $SCREENNAME -X stuff $'\015' sleep 45 screen -S $SCREENNAME -X stuff "/say Shutting down (restart) in 15 seconds." screen -S $SCREENNAME -X stuff $'\015' sleep 15 screen -S $SCREENNAME -X stuff "/stop" screen -S $SCREENNAME -X stuff $'\015' sleep 2 startServer else echo "Cannot restart server: it isn't running." fi; } #In order for this function to work, a directory 'backup/$FOLDERNAME' must exist in the same #directory that '$FOLDERNAME' resides backupWorld (){ if screen -list | grep "$SCREENNAME" > /dev/null then echo "Server is running. Giving a 1-minute warning." screen -S $SCREENNAME -X stuff "/say Shutting down (backup) in one minute." screen -S $SCREENNAME -X stuff $'\015' screen -S $SCREENNAME -X stuff "/say Server should be down for no more than a few seconds." screen -S $SCREENNAME -X stuff $'\015' sleep 45 screen -S $SCREENNAME -X stuff "/say Shutting down for backup in 15 seconds." screen -S $SCREENNAME -X stuff $'\015' sleep 15 screen -S $SCREENNAME -X stuff "/stop" screen -S $SCREENNAME -X stuff $'\015' fi sleep 2 if screen -list | grep $SCREENNAME > /dev/null then echo "Server is still running? Error." else cd .. tar -czvf backup0.tar.gz $FOLDERNAME mv backup0.tar.gz backup/$FOLDERNAME cd backup/$FOLDERNAME rm backup10.tar.gz mv backup9.tar.gz backup10.tar.gz mv backup8.tar.gz backup9.tar.gz mv backup7.tar.gz backup8.tar.gz mv backup6.tar.gz backup7.tar.gz mv backup5.tar.gz backup6.tar.gz mv backup4.tar.gz backup5.tar.gz mv backup3.tar.gz backup4.tar.gz mv backup2.tar.gz backup3.tar.gz mv backup1.tar.gz backup2.tar.gz mv backup0.tar.gz backup1.tar.gz cd ../../$FOLDERNAME screen -dmS $SCREENNAME java -Xmx1024M -Xms1024M -jar minecraft_server.jar; sleep 2 if screen -list | grep "$SCREENNAME" > /dev/null then echo "Minecraft server restarted; happy mining!" else echo "ERROR: Minecraft server failed to start!" fi fi; } printCommands (){ echo echo "$0 usage:" echo echo "Start : Starts the server on a detached screen." echo "Stop : Stop the server; includes a 1-minute warning." echo "StopNOW : Stops the server with only a 5-second warning." echo "Restart : Stops the server and starts the server again." echo "Backup : Stops the server (1 min), backs up the world, and restarts." echo "Help : Display this message." } #Forces case-insensitive string comparisons shopt -s nocasematch #Primary 'Switch' if [[ $1 = "start" ]] then startServer elif [[ $1 = "stop" ]] then stopServer elif [[ $1 = "stopnow" ]] then stopServerNow elif [[ $1 = "backup" ]] then backupWorld elif [[ $1 = "restart" ]] then restartServer else printCommands fi

Read the article

Cowboy Agile?

- by Robert May

In a previous post, I outlined the rules of Scrum. This post details one of those rules. I’ve often heard similar phrases around Scrum that clue me in to someone who doesn’t understand Scrum. The phrases go something like this: “We don’t do Agile because the idea of letting people just do whatever they want is wrong. We believe in a more structured approach.” (i.e. Work is Prison, and I’m the Warden!) “I love Agile. Agile lets us do whatever we want!” (Cowboy Agile?) “We’re Agile, but we use a process that I’ve created.” (Cowboy Agile?) All of those phrases have one thing in common: The assumption that Agile, and I mean Scrum, lets you do whatever you want. This is simply not true. Executing Scrum properly requires more dedication, rigor, and diligence than happens in most traditional development methods. Scrum and Waterfall Compared Since Scrum and Waterfall are two of the most commonly used methodologies, a little bit of contrasting and comparing is in order. Waterfall Scrum A project manager defines all tasks and then manages the tasks that team members are working on. The team members define the tasks and estimates of the stories for the current iteration. Any team member may work on any task in the iteration. Usually only a few milestones that need to be met, the milestones are measured in months, and these milestones are expected to be missed. Little work is ever done to improve estimates and poor estimators can hide behind high estimates. Stories must be delivered every iteration, milestones are measured in hours, and the team is expected to figure out why their estimates were wrong, even when they were under. Repeated misses can get the entire team fired. Partially completed work is normal. Partially completed work doesn’t count. Nobody knows the task you’re working on. Everyone knows what you’re working on, whether or not you’re making progress and how much longer you think its going to take, in hours. Little requirement to show working code. Prototypes are ok. Working code must be shown each iteration. No smoke and mirrors allowed. Testing is done in lengthy cycles at the end of development. Developers aren’t held accountable. Testing is part of the team. If the testers don’t accept the story as complete, the team can’t count it. Complete means that the story’s functionality works as designed. The team can’t have any open defects on the story. Velocity is rarely truly measured and difficult to evaluate. Velocity is integral to the process and can be seen at a glance and everyone in the company knows what it is. A business analyst writes requirements. Designers mock up screens. Developers hide behind “I did it just like the spec doc told me to and made the screen exactly like the picture” Developers are expected to collaborate in real time. If a design is bad or lacks needed details, the developers are required to get it right in the iteration, because all software must be functional. Designers and Business Analysts are part of the team and must do their work in iterations slightly ahead of the developers. Upper Management is often surprised. “You told me things were going well two months ago!” Management receives updates at the end of every iteration showing them exactly what the team did and how that compares to what' is remaining in the backlog. Managers know every iteration what their money is buying. Status meetings are rare or don’t occur. Email is a primary form of communication. Teams coordinate every single day with each other and use other high bandwidth communication channels to make sure they’re making progress. Email is used only as a last resort. Instead, team members stand up, walk to each other, and talk, face to face. If that’s not possible, they pick up the phone. IF someone asks what happened, its at the end of a lengthy development cycle measured in months, and nobody really knows why it happened. Someone asks what happened every iteration. The team talks about what happened, and then adapts to make sure that what happened either never happens again or happens every time. That’s probably enough for now. As you can see, a lot is required of Scrum teams! One of the key differences in Scrum is that the burden for many activities is shifted to a group of people who share responsibility, instead of a single person having responsibility. This is a very good thing, since small groups usually come up with better and more insightful work than single individuals. This shift also results in better velocity. Team members can take vacations and the rest of the team simply picks up the slack. With Waterfall, if a key team member takes a vacation, delays can ensue. Scrum requires much more out of every team member and as a result, Scrum teams outperform non-Scrum teams working 60 hour weeks. Recommended Reading Everyone considering Scrum should read Mike Cohn’s excellent book, User Stories Applied. Technorati Tags: Agile,Scrum,Waterfall

Read the article

How To Get Web Site Thumbnail Image In ASP.NET

- by SAMIR BHOGAYTA

Overview One very common requirement of many web applications is to display a thumbnail image of a web site. A typical example is to provide a link to a dynamic website displaying its current thumbnail image, or displaying images of websites with their links as a result of search (I love to see it on Google). Microsoft .NET Framework 2.0 makes it quite easier to do it in a ASP.NET application. Background In order to generate image of a web page, first we need to load the web page to get their html code, and then this html needs to be rendered in a web browser. After that, a screen shot can be taken easily. I think there is no easier way to do this. Before .NET framework 2.0 it was quite difficult to use a web browser in C# or VB.NET because we either have to use COM+ interoperability or third party controls which becomes headache later. WebBrowser control in .NET framework 2.0 In .NET framework 2.0 we have a new Windows Forms WebBrowser control which is a wrapper around old shwdoc.dll. All you really need to do is to drop a WebBrowser control from your Toolbox on your form in .NET framework 2.0. If you have not used WebBrowser control yet, it's quite easy to use and very consistent with other Windows Forms controls. Some important methods of WebBrowser control are. public bool GoBack(); public bool GoForward(); public void GoHome(); public void GoSearch(); public void Navigate(Uri url); public void DrawToBitmap(Bitmap bitmap, Rectangle targetBounds); These methods are self explanatory with their names like Navigate function which redirects browser to provided URL. It also has a number of useful overloads. The DrawToBitmap (inherited from Control) draws the current image of WebBrowser to the provided bitmap. Using WebBrowser control in ASP.NET 2.0 The Solution Let's start to implement the solution which we discussed above. First we will define a static method to get the web site thumbnail image. public static Bitmap GetWebSiteThumbnail(string Url, int BrowserWidth, int BrowserHeight, int ThumbnailWidth, int ThumbnailHeight) { WebsiteThumbnailImage thumbnailGenerator = new WebsiteThumbnailImage(Url, BrowserWidth, BrowserHeight, ThumbnailWidth, ThumbnailHeight); return thumbnailGenerator.GenerateWebSiteThumbnailImage(); } The WebsiteThumbnailImage class will have a public method named GenerateWebSiteThumbnailImage which will generate the website thumbnail image in a separate STA thread and wait for the thread to exit. In this case, I decided to Join method of Thread class to block the initial calling thread until the bitmap is actually available, and then return the generated web site thumbnail. public Bitmap GenerateWebSiteThumbnailImage() { Thread m_thread = new Thread(new ThreadStart(_GenerateWebSiteThumbnailImage)); m_thread.SetApartmentState(ApartmentState.STA); m_thread.Start(); m_thread.Join(); return m_Bitmap; } The _GenerateWebSiteThumbnailImage will create a WebBrowser control object and navigate to the provided Url. We also register for the DocumentCompleted event of the web browser control to take screen shot of the web page. To pass the flow to the other controls we need to perform a method call to Application.DoEvents(); and wait for the completion of the navigation until the browser state changes to Complete in a loop. private void _GenerateWebSiteThumbnailImage() { WebBrowser m_WebBrowser = new WebBrowser(); m_WebBrowser.ScrollBarsEnabled = false; m_WebBrowser.Navigate(m_Url); m_WebBrowser.DocumentCompleted += new WebBrowserDocument CompletedEventHandler(WebBrowser_DocumentCompleted); while (m_WebBrowser.ReadyState != WebBrowserReadyState.Complete) Application.DoEvents(); m_WebBrowser.Dispose(); } The DocumentCompleted event will be fired when the navigation is completed and the browser is ready for screen shot. We will get screen shot using DrawToBitmap method as described previously which will return the bitmap of the web browser. Then the thumbnail image is generated using GetThumbnailImage method of Bitmap class passing it the required thumbnail image width and height. private void WebBrowser_DocumentCompleted(object sender, WebBrowserDocumentCompletedEventArgs e) { WebBrowser m_WebBrowser = (WebBrowser)sender; m_WebBrowser.ClientSize = new Size(this.m_BrowserWidth, this.m_BrowserHeight); m_WebBrowser.ScrollBarsEnabled = false; m_Bitmap = new Bitmap(m_WebBrowser.Bounds.Width, m_WebBrowser.Bounds.Height); m_WebBrowser.BringToFront(); m_WebBrowser.DrawToBitmap(m_Bitmap, m_WebBrowser.Bounds); m_Bitmap = (Bitmap)m_Bitmap.GetThumbnailImage(m_ThumbnailWidth, m_ThumbnailHeight, null, IntPtr.Zero); } One more example here : http://www.codeproject.com/KB/aspnet/Website_URL_Screenshot.aspx

Search Results

Search found 1318 results on 53 pages for 'shots fired'.

Page 45/53 | < Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52 | Next Page >

- by Paul

- by irrational John

- by Anon

- by Trioke

- by shiju

- by Matthew Guay

- by Tarun Arora

- by Tarun Arora

- by MightyZot

- by Wirde

- by Tarun Arora

- by chobo2

- by jcortez

- by Rick Strahl

- by Rick Strahl

- by jamiet

- by mbcrump

- by Rick Strahl

- by DigiMortal

- by Ricardo Peres

- by Rick Strahl

- by VioletCrime

- by Robert May

- by SAMIR BHOGAYTA

< Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52 | Next Page >