Search Results

Search found 2181 results on 88 pages for 'wifi cordon'.

Page 45/88 | < Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >

• Network connection via USB

  - by Fco

  Can I get my Nexus One/Android on my local network over USB instead of WiFi and browse to my computer's IP address, the one to which the phone would be connected to, via USB? For instance, let's say my computer has an IP address 100.1.1.1 and when I go to it from the computer I would go to my localhost and see a website I've set up locally in the computer. Then, I connect my phone to that computer via USB. Can I then go to 100.1.1.1 from the browser and see the same website? All this through the USB, no WiFi?

  Read the article

• getting error : make: *** /lib/modules/2.6.31-20-generic/build: No such file or directory on Ubuntu

  - by user36637

  getting error : "make: * /lib/modules/2.6.31-20-generic/build: No such file or directory " on Ubuntu 9.1 , When trying to install My wifi card driver and run make command

  Read the article

• No wireless adapter in msi u200

  - by Mino Marimat

  I have a MSi u200, and the weird thing was that I was using this normally before, then after a few minutes all of a sudden it couldn't find the wifi signal from my house. I did some troubleshooting and a bit of search in the control panel, and it seems like my hardware is missing. :( I can't even turn on the wireless light using Fn+F8, so my suspicions about the missing hardware strengthened. I tried searching for DIY fixes, but I found out that the wireless card is actually built-in deeper, unlike the RAM cards and the hard drive where you can either replace or add more cards. What do I do?? As of the moment, I can get connected to my wifi here at home using a wireless adapter via usb, and it's working. So my guess about the hardware problem seems correct. HELP!!! Thanks!

  Read the article

• Mac app to apply certain settings based on selected location (profile)?

  - by Jonathan

  When my MacBook is connected to my Thunderbolt Display, I want WiFi to be turned off, Bluetooth to be turned on and the screen brightness to be at max. On the road I want WiFi to be turned on, Bluetooth to be turned off and the screen brightness to be somewhere in the middle. It would be easy if there was an application that would let me create several profiles (like 'Home' and 'On the road'), which I could easily select (from Dashboard or the menu bar). The profile settings would then be applied instantly. Does an application like this exist?

  Read the article

• My iPhone, Macbook and Laptop won't connect to 192.168.1.*

  - by 1Rabbit

  Previously I could connect perfectly with my iphone to my web server on 192.168.1.* but since I got a MacBook, I now can't even connect my iphone to either of the computers. I can connect to the wifi hub on my iphone, I can connect to the wifi hub on all the computers including my phone. Neither of my computers nor my iphone 5 can communicate with each other. What has happened? I've tried number of different local web servers, even tried the osx web server, but my iphone just wont connect to any.

  Read the article

• Cannot open some websites

  - by Jayashree

  Hi all, I have a very specific problem. We have a wifi router at home which supports three laptops and a desktop. For the past month or so, I've been unable to open a number of websites on our HP desktop, Dell laptop and my Macbook. These include everything connected with http://wordpress.org and several others. The page simply refuses to load. I can't access some other websites as well. I've tried everything. We've rebooted the router, deleted all the cookies/download history, but nothing works. I've tried accessing these websites on IE, Chrome, Firefox and Safari. Strangely, when friends use their laptops on the same wifi connection, the websites open just fine. What do I do? I'm getting desperate here. Jayashree

  Read the article

• How to set up a local webDAV server for use with Goodreader on the ipad?

  - by confused-about-webdav

  I need to know how to set up a local webDav server on my PC so that goodreader on ipad can automatically sync with it over the local wifi network? I am really a rookie when it comes to setting up a web server and have tried various guides on the internet. I tried setting up a webdav server using IIS and forwarded the required ports and enabled webdav publishing but goodreader can find it in the local wifi network automatically nor is it able to connect even after manually entering the credendtials. So i'll be really greateful if someone who has successfully setup a webdav server for use with goodreader can point me on how to do it?

  Read the article

• Can Kies provide a data connection so my phone can avoid mobile data usage?

  - by Highly Irregular

  I regularly connect my Samsung phone by USB cable to my PC to charge it up, and when I run the Samsung Kies app on the PC I can sync data too. Is it possible for my phone to use my PCs internet connection through the USB link to avoid data charges? I don't have a wifi connection available. It would make sense if Kies could provide this, or perhaps there's some other way I can achieve it without wifi, such as using Bluetooth. I have a Samsung GT-S7500, though this question should apply to many other models.

  Read the article

• Windows 7 unidentified network (or limited access) after hibernate.

  - by null

  My windows 7 network will show limited access or unidentified network after coming up from hibernation. In the office I normally use LAN connection, I turn-off my wireless card (DELL Latitude has on/off switch for the wireless card). When I back at home I will turn on the wireless card, but it will take about 15 seconds to detect my home WIFI and then show limited access. I will have to restart the notebook and it will be able to connect to my WIFI and internet. The problem will be solved if I restart the notebook, but that defeats the purpose of hibernation doesn't it? I have tried uninstalling the wireless card driver but still does not solve it. I also tried updating my network card driver but windows says I am using the latest driver. On support.dell.com also showing I am using the latest driver.

  Read the article

• Sudo and startup script

  - by Pitto

  Hello my friends. I have a new asus 1215n and I need to digit commands to enable multitouch. No problem: I've made a script. Since this netbook also need manual activation of the wifi driver the complete script is: #!/bin/bash # # list of synaptics device properties http://www.x.org/archive/X11R7.5/doc/man/man4/synaptics.4.html#sect4 # list current synaptics device properties: xinput list-props '"SynPS/2 Synaptics TouchPad"' # sleep 5 #added delay... xinput set-int-prop "SynPS/2 Synaptics TouchPad" "Device Enabled" 8 1 xinput --set-prop --type=int --format=32 "SynPS/2 Synaptics TouchPad" "Synaptics Two-Finger Pressure" 4 xinput --set-prop --type=int --format=32 "SynPS/2 Synaptics TouchPad" "Synaptics Two-Finger Width" 9 # Below width 1 finger touch, above width simulate 2 finger touch. - value=pad-pixels xinput --set-prop --type=int --format=8 "SynPS/2 Synaptics TouchPad" "Synaptics Edge Scrolling" 1 1 0 # vertical, horizontal, corner - values: 0=disable 1=enable xinput --set-prop --type=int --format=32 "SynPS/2 Synaptics TouchPad" "Synaptics Jumpy Cursor Threshold" 250 # stabilize 2 finger actions - value=pad-pixels #xinput --set-prop --type=int --format=8 "SynPS/2 Synaptics TouchPad" "Synaptics Tap Action" 0 0 0 0 1 2 3 # pad corners rt rb lt lb tap fingers 1 2 3 (can't simulate more then 2 tap fingers AFAIK) - values: 0=disable 1=left 2=middle 3=right etc. (in FF 8=back 9=forward) xinput --set-prop --type=int --format=8 "SynPS/2 Synaptics TouchPad" "Synaptics Two-Finger Scrolling" 1 0 # vertical scrolling, horizontal scrolling - values: 0=disable 1=enable #xinput --set-prop --type=int --format=8 "SynPS/2 Synaptics TouchPad" "Synaptics Circular Scrolling" 1 #xinput --set-prop --type=int --format=8 "SynPS/2 Synaptics TouchPad" "Synaptics Circular Scrolling Trigger" 3 sudo modprobe lib80211 sudo insmod /home/pitto/Drivers/broadcom/wl.ko exit I've saved the script, then put it in my home, then chmod +x scriptname and then added it to startup applications. Then I did: sudo visudo and added this row: myusername ALL=(ALL) NOPASSWD: /home/scriptname rebooted and... Multitouch works but wifi not. When I manually launch the script it asks for sudo password so I thought it was because of modprobe and insmod commands and I've added those commands to sudo visudo. Nothing. What am I doing wrong?

  Read the article

• To have a long life with the battery it has to be separated from the Laptop after each use

  - by laptopo1 dsad

  To have a long life with the battery it has to be separated from the Laptop after each use Developing a Laptop and concern about it's battery life Don't be concerned follow this advice how to deal with your Laptop battery. A fresh power supply of your Laptop can be purchased in a very low charge condition, and must be fully charged before use. A different battery pack needs to be fully charged and fully discharged or cycled as much as five times to condition them into performing at full capacity. And also refer your manual instructions of one's Laptop for charging instructions. Inspiron 15z battery Tips: Unplug battery after use: To have a long life with the battery it has to be separated from the Laptop after each use. Clean battery contacts often: Clean your battery's metal contacts once in a month with a cloth moistened with rubbing alcohol. This prevents the transfer of power out of your battery additional efficient. Turn off the WiFi and Bluetooth, in any other case being used: Usually, we activate our WiFi or Bluetooth for whatever reason and tend to forget to Off it, that could spark a huge relieve your battery, Shut off right after the usage. Dell XPS L501x battery Dim notebook screen: When you're with your Laptop in Daytime, you will need for full brightness. But also in case of Night, just dim the screen reducing brightness, which will consume more charge once the brightness might be more and also It's essential on your eyes to determine lesser brighten screen inside nights. Dell Inspiron 17R battery Have hardly any Background programs: Letting more programs to own behind the screen could consume more Dell Inspiron N4010 battery charge hence have very few without background programs are Better. Make use of the Hard disk drive more than CD/DVD drive: Making use of disc drive instead your CD/DVD drive could consume less battery power. Latitude E5400 Battery

  Read the article

• Atheros wireless not working

  - by Chandru1

  I have been struggling hard since i have installed Ubuntu 10.10 but it has been difficult for me to get my wifi working. So here is what i tried. First i checked whether i have the driver using the ifconfig command and it shows the wireless lan driver as wlan0. Next, i tried the command iwlist wlan0 scanning by becoming the root which gave me the output as no scan results. Next, i visited this link https://help.ubuntu.com/community/WifiDocs/Driver/Atheros to see as to what problem my laptop may have. I do own have an ath5k chipset. And as i followed the instructions in the above link in one of the blacklist-ath_pci.conf file had this written in it. For some Atheros 5K RF MACs, the madwifi driver loads buts fails to correctly initialize the hardware, leaving it in a state from which ath5k cannot recover. To prevent this condition, stop madwifi from loading by default. Use Jockey to select one driver or the other. (Ubuntu: #315056, #323830 I am not that good at Linux but i have given it a try. I am desperate to have my wifi working and i would be glad if this community could help. ADDED: If anyone would like to know as to what drivers i am using this is the output. network description: Wireless interface product: AR2413 802.11bg NIC vendor: Atheros Communications Inc. physical id: 3 bus info: pci@0000:0a:03.0 logical name: wlan0 version: 01 serial: 00:19:7d:d3:0c:fd width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath5k driverversion=2.6.35-24-generic firmware=N/A latency=168 link=no maxlatency=28 mingnt=10 multicast=yes wireless=IEEE 802.11bg resources: irq:18 memory:d0000000-d000ffff Some more information and output as to what i have done. lsmod | grep ath ath5k 130083 0 mac80211 231541 1 ath5k ath 8153 1 ath5k cfg80211 144470 3 ath5k,mac80211,ath led_class 2633 1 ath5k

  Read the article

• Canon Pixma 432 network scanner

  - by Donald Cutler

  I have a problem with a Canon Pixma MX432 Printer/Scanner. I just removed Windows 7 and installed Ubuntu 14.04 8/17/2014 on an older desktop that I built (The computer is an AMD build with an ASUS motherboard). The printer/scanner is an all-in-one unit that is networked in my house via WiFi. All of the computers in my house can access this printer/scanner. My Macbook, my wife's Windows 8 laptop, and my kids mini iPads. I am giving Linux a test-drive with some success as far as setting devices up. But, for the life of me I cannot figure out my scanner issue. If anyone can help I would appreciate it. Make/Model: Canon Pixma MX432 PPD Driver: I have no idea how to get this info. Supported?: no, from the information I gather from old forum posts. Works?: the printer works via WiFi perfectly, but not the scanner. The Simple Scan program sees the scanner, but produces an error when I attempt to scan. I also tried XSANE, but that program does not even detect the scanner. NOTE: THE PRINTER IS WORKING OFF OF AN UBUNTU DRIVER AND NOT A CANON DRIVER. Linux Version: Ubuntu 14.04 I tried the steps in this post, downloaded the "scangearmp-mx430series-1.90-1-deb.tar.gz" file, but could not get the scanner to work. http://ubuntuforums.org/archive/index.php/t-2096430.html any suggestions?

  Read the article

• Wireless not detected on an hp Pavilion g6 - RT5390PCIe

  - by Earl Larson

  I just bought an HP Pavilion g6 laptop and I installed Natty Narwhal alongside Windows 7. In Windows 7, my WiFi works perfect but in Ubuntu it absolutely (no matter what I do) won't detect my home WiFi network. Here is the output of "lspci": earl@ubuntu:~$ lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge 00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx) 00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0) 00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) 00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] 00:12.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 42) 00:14.1 IDE interface: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller (rev 40) 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40) 00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller (rev 40) 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40) 00:14.5 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 00:16.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:16.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control 01:05.0 VGA compatible controller: ATI Technologies Inc M880G [Mobility Radeon HD 4200] 01:05.1 Audio device: ATI Technologies Inc RS880 Audio Device [Radeon HD 4200] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05) 03:00.0 Network controller: Ralink corp. Device 5390 04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5209 (rev 01) earl@ubuntu:~$

  Read the article

• I just moved, have no internet on my laptop or ipod, but everyone else who lives here does

  - by Kay

  I just moved to Thunder Bay and my laptop as well as my ipod cannot connect to the internet. My laptop allows me to write the password for the wifi, but I still have no internet connection. When I try to use the cable, the computer tells me I have a perfect connection, even the icon shows that it's working, but I can't open any web pages or use any internet functions. When I try to use MSN it sends me to a troubleshooting option and informs me that there's some kind of problem with the "gateway". I have unplugged the modem and the router and plugged them back in, this did not help. I am living in a home where all the people are using wifi on the same system as me, and no one has ever had any problems. Back home both my laptop and my ipod worked without a problem both in my home, as well as on campus. Since this problem seems to be limited only to me, it would indicate that there's a problem on my end -- with my laptop. However, in that case my ipod would be working. It has never failed to connect before. Any suggestions would be much appreciated.

  Read the article

• Wireless not detected on an hp Pavilion g6

  - by Earl Larson

  I just bought an HP Pavilion g6 laptop and I installed Natty Narwhal alongside Windows 7. In Windows 7, my WiFi works perfect but in Ubuntu it absolutely (no matter what I do) won't detect my home WiFi network. Here is the output of "lspci": earl@ubuntu:~$ lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge 00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx) 00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0) 00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) 00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] 00:12.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 42) 00:14.1 IDE interface: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller (rev 40) 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40) 00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller (rev 40) 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40) 00:14.5 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 00:16.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:16.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control 01:05.0 VGA compatible controller: ATI Technologies Inc M880G [Mobility Radeon HD 4200] 01:05.1 Audio device: ATI Technologies Inc RS880 Audio Device [Radeon HD 4200] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05) 03:00.0 Network controller: Ralink corp. Device 5390 04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5209 (rev 01) earl@ubuntu:~$

  Read the article

• Is there a way to disable the hardware on/off switch for the Wireless interface?

  - by avee

  I have an HP 520 and is running the latest Ubuntu 11.10. The hardware works fine with Ubuntu with one exception: The device has a hardware switch for turning the wifi on and off. Every time the wi-fi is disabled through the hardware switch, I am unable to bring it on again. The message on the networking popup would be device not ready. What I am looking for is a way to disable the hardware switch altogether so that when users accidentally press the button, the wifi would not be disabled. There is no setting to disable the switch in the BIOS. Hardware info from lspci -nn: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express Memory Controller Hub [8086:27ac] (rev 03) 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME Express Integrated Graphics Controller [8086:27ae] (rev 03) 00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03) 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 01) 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 01) 00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 01) 00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 01) 00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 01) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e1) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 01) 00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 01) 02:06.0 CardBus bridge [0607]: ENE Technology Inc CB1410 Cardbus Controller [1524:1410] (rev 01) 02:08.0 Ethernet controller [0200]: Intel Corporation 82562ET/EZ/GT/GZ - PRO/100 VE (LOM) Ethernet Controller Mobile [8086:1068] (rev 01) 10:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02) The output from lsmod | grep iwl: iwl3945 73329 0 iwl_legacy 71499 1 iwl3945 mac80211 272785 2 iwl3945,iwl_legacy cfg80211 172392 3 iwl3945,iwl_legacy,mac80211

  Read the article

• Project Codenames - Yea or Nay?

  - by rmx

  Where I work, most of our projects have (or at least attempt) descriptive, useful names. However we have a few with names that make no sense: I found that an assembly named WiFi which actually has nothing whatsoever to do with wi-fi, but is a codename. When I asked why, I was told that it's to protect company secrets incase some intern has few too many at the pub on Friday and starts chatting about the brand new 'WiFi' project he's been working on. Its clear that some people find enjoyment in finding silly / amusing codenames for their projects (like in this question). My question is: is it really a good idea to use codenames for your projects or are you better off spending the time to decide upon a descriptive name? My opinion is that in the long-run its better to give your projects relevant names. My reasoning is that if you can't think of a decent name, perhaps you don't really know the requirements well enough. I think there are better ways to 'protect company secrets' and I find it quite confusing when the name does not correlate at all with the content. It's just common sense, surely?! So do you use codenames and what the your reasons for or against this seemingly common, yet annoying (to me at least) practice?

  Read the article

• dell vostro 1000 broadcom wireless connection

  - by lorrenuy

  I have a problem with the hardware broadcom wifi. I press the hotkey fn+f2 to activate the hardware and this will not work. I'll look at the drivers but it appears to be installed. How can I solve this problem? Ubuntu is all new to me so if possible, give me a clear explanation. Now do I connect the lan cable. I use the Ubuntu 11.10 lawrence@lawrence-Vostro-1000:~$ sudo lshw -class network [sudo] password for lawrence: PCI (sysfs) *-network description: Network controller product: BCM4311 802.11b/g WLAN vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 version: 01 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:18 memory:c0200000-c0203fff *-network description: Ethernet interface product: BCM4401-B0 100Base-TX vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:08:00.0 logical name: eth1 version: 02 serial: 00:1c:23:a2:b9:a9 size: 100Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=b44 driverversion=2.0 duplex=full ip=192.168.1.18 latency=64 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:21 memory:c0300000-c0301fff lawrence@lawrence-Vostro-1000:~$ lawrence@lawrence-Vostro-1000:~$ rfkill list all 0: dell-wifi: Wireless LAN Soft blocked: yes Hard blocked: yes

  Read the article

• Centrino Wireless-N 1000 takes forever to connect and keeps asking for password

  - by waclock

  A few days ago I started having this problem. When I tried to connect to any WiFi Connection it would stay connecting forever, and after a minute or so it would ask me for the password again. The strange thing is that this happened out of nowhere, I did not install any new drivers or anything like that. After this happened I decided to uninstall ubuntu and install it again ("inside windows") but the problem is still there. Any suggestions would be greatly appreciated. 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no 1: hp-bluetooth: Bluetooth Soft blocked: yes Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:07:00.0 logical name: eth0 version: 06 serial: 2c:27:d7:aa:e4:7d size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl8168e-3_0.0.4 03/27/12 latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:50 ioport:4000(size=256) memory:c0404000-c0404fff memory:c0400000-c0403fff *-network description: Wireless interface product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:0d:00.0 logical name: wlan0 version: 00 serial: 00:1e:64:09:9c:58 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-23-generic-pae firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:52 memory:c4500000-c4501fff *-network description: Ethernet interface physical id: 1 bus info: usb@2:1.2 logical name: eth1 serial: ee:85:2f:7d:80:96 capabilities: ethernet physical configuration: broadcast=yes driver=ipheth ip=172.20.10.2 link=yes multicast=yes

  Read the article

• Sharing an internet connection through the Ethernet port

  - by Bob Cunningham

  I have a small living room PC (Bohica, running fully-updated Ubuntu 10.10/Maverick) connected to my HDTV that I use for web browsing and media streaming. It connects via WiFi (wlan0) to my Fedora server (Snafu) that in turn connects to the internet. I use static addressing, and everything has been working fine. I just got a Blu-ray player, and I'd like to give it wired network access to the internet via Bohica's available wired ethernet port (eth0). So far, I haven't been to get eth0 and the network configured to get the Blu-ray player talking to the internet. Here's my wlan0 configuration: ip4 addr: 192.168.0.100 mask: /24 (255.255.255.0) gateway: 192.168.0.4 (fedora box) The Blu-ray player is set to an IP of 192.168.0.98/24, with the same gateway as above. I want eth0 set to an IP of 192.168.0.99/24, but when I do this using nm-connection-editor I lose internet access (the system tries to use eth0 as the default internet access interface). How do I get my blu-ray player to talk to the internet through Bohica, and do so without disrupting my current (working) network? Thanks. Edit: Here's the relevant output from nm-tool with the Blu-ray player connected: $ nm-tool NetworkManager Tool State: connected - Device: eth0 Type: Wired Driver: forcedeth State: disconnected Default: no HW Address: 90:FB:A6:2C:94:32 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on - Device: wlan0 [wlan0] Type: 802.11 WiFi Driver: ndiswrapper State: connected Default: yes HW Address: 00:26:5A:C0:D0:05 IPv4 Settings: Address: 192.168.0.100 Prefix: 24 (255.255.255.0) Gateway: 192.168.0.4

  Read the article

• wireless is disabled by hardware lenovo 3000g430

  - by sudheer

  sir i have problem with my wifi switch sir please tell me solution for my problem (wifi is disabled by hardware). output of sudo lshw -C network is sudo] password for sudheer: *-network DISABLED description: Wireless interface product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:06:00.0 logical name: eth2 version: 01 serial: 00:21:00:72:3a:93 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11bg resources: irq:19 memory:f4700000-f4703fff *-network description: Ethernet interface product: NetLink BCM5906M Fast Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:07:00.0 logical name: eth0 version: 02 serial: 00:1e:68:ad:24:0b size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 duplex=full firmware=sb v3.04 ip=172.16.52.79 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:47 memory:f4600000-f460ffff output of iwconfig is lo no wireless extensions. eth2 IEEE 802.11 Access Point: Not-Associated Link Quality:5 Signal level:0 Noise level:0 Rx invalid nwid:0 invalid crypt:0 invalid misc:0 eth0 no wireless extensions. sudheer@sudheer:~$ sudo iwlistscanning sudo: iwlistscanning: command not found ***sudheer@sudheer:~$ sudo iwlist scanning*** lo Interface doesn't support scanning. eth2 Failed to read scan data : Invalid argument eth0 Interface doesn't support scanning.

  Read the article

• Solution for lightweight LAN peer discovering?

  - by DevilWithin

  I built a library for purely cross-platform programming. My games made with it run fine in Android , Pc, Linux, Mac etc. The networking capabilities are provided by ENET library, therefore all communication between my apps is not TCP or UDP compatible, but only in the custom protocol, even tough its based on the UDP ultimately. I don't think its possible to do what i want with ENET, thats why I ask here for help! Lets say I have the same game running in my Android phone, my laptop and my pc. They are all in the same wifi network, and therefore in a LAN, whether its Wifi hotspot(?) or the household router. I need each of those 3 peers to discover the other two in the network. This is meant only to find the IP of alive apps in the LAN network, to be able to host multiplayer games between them. I can only think of one effective way to do this, UDP broadcast, wait responses, but if that is the solution, i need something small, since its the only purpose of the implementation. Other way could be to try to connect to all IPs in the LAN address subrange, but I don't think the OS would be with me on this one :p Sorry for the long question!

  Read the article

• ifconfig can't see USB wireless

  - by Alex

  I have a wifi USB dongle which I have previously used on a Raspberry Pi (this it is what it is target at). I am trying to get it working on an Nvidia Jetson TK1, however I am having some problems. When I run ifconfig I can't see the wifi, only the ethernet and local loopback. iwconfig reports no wireless extensions on all devices. lsusb does find the device: Bus 002 Device 008: ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter So I am not sure why the network tools can't see it. I have tried logging on with a GUI and opening up the network settings through Unity, but cannot see any wireless devices either. Not sure if this is useful, but output of lsmod: Module Size Used by nvhost_vi 2940 0 How can I enable wireless networking on this computer? Command line approach is preferred, but either is fine. UPDATE I don't have the kernel module rt2800usb anywhere on my system. If I do an apt-file search for rt2800usb it lists a number of packages of the pattern: linux-image-3.13.0-*. Perhaps installing one of these will do the trick, but can anyone tell me if its safe to do so?

  Read the article

• Is it possible to use 3G internet for a TCP/IP game server?

  - by Amit Ofer

  I'm working on a turned based multiplayer android game with a friend. I started working on the game server and client using socket programming. I found a few tutorials on how to implement a basic chat on android and I started extending that example to suit my needs. Basically the game is really simple and the communication only include sending a few string from the client to the server every turn and sending the calculated scores back to all the clients after each turn. the idea is that one of the players creates the game and thus initialize the server, and each player connects to this client using ip. I tried this solution and it seems to work great when all the players are using the same wifi connection or by using router port forwarding. The problem is when trying to use 3G internet for the server, I guess the problem is that 3G ip address isn't global and you can't use port forwarding there, correct me if I'm wrong here. Is there a way to overcome this issue? or the only solution is to limit my game to wifi only or think of a different solution than the standard socket programming solution? I.E web server etc. what do you think would be the best approach here? Thanks.

  Read the article

< Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >