Search Results

Search found 2181 results on 88 pages for 'wifi cordon'.

Page 44/88 | < Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >

  • 802.11 Capture Frame

    - by ALi
    I am using wireshark in monitor mode to capture all the frame. I buffered all the QosData in order to calculate the biterate of each station on the network. I calculate the biterate but it is not an accurate value. what i need to know is when the station use the network alone and when it uses it with another station? i know if two station with different wifi card for exemple ( st1 802.11g 54 Mb/s, st2 802.11n 300 Mb/s) if st1 uses alone the line the biterate used is 28 MB/s and if st2 uses alone the network the bit rate increase to approximately 150Mb/s but if the two station use the network at the same time the st1 lost about 80% of its bit rate because of the st1 wifi card thx in advance

    Read the article

  • Windows Hosted Network Redirect to IIS

    - by rulestein
    I would like to setup a Windows 7 machine as a wifi hotspot that always redirects to the IIS web hosting on the same machine. I have the hotspot piece working with the built in hosted network of Widnows 7. The webhosting was easy enough with IIS. Now, how do I connect the 2? The idea is to have a standalone device that users will be able to connect to the wifi and any webpage they go to will redirect to the internal webpage. I only expect 1 or 2 users at a time and there won't be any internet access involved.

    Read the article

  • Time capsule on windows 7

    - by Kiva
    Hi guys, I have a time machine to backup my mac book pro. All work fine with it. Now, my girlfriend have a PC on windows 7. She wants to backup her PC with cobian backup on the time machine. But her PC doesn't see the time capsule, so it's impossible to connect it. The Time capsule is connected on my box adsl with wifi and the mac and the pc are connected on the box with wifi. Why windows doesn't see the TC ? I installed "bonjour" on the PC but nothing worked. Thanks for your help.

    Read the article

  • 64 Bit Windows drivers for Inspiron 1720

    - by Rob Allen
    Dell doesn't seem to offer 64 bit drivers specifically for the Inspiron 1720 (laptop). I'm going to be upgrading from Vista 32-bit to Windows 7 64bit and I want to pull down the necessary stuff before hand. Are there any Dell systems that are similar enough to the Inspiron 1720 that I can use for a baseline to make sure I still have Ethernet and WiFi after the reinstall? It doesn't matter if they are for Vista 64 or Windows 7. Identified hardware: Processor: Intel mobile Core 2 Duo T7500 Chipset: Intel Mobile 965 Express Wifi: Intel Pro Wireless Drive Controller: Intel Matrix Graphics: nVidia GeForce 8600M GT Bluetooth: Dell TrueMobile 355 + EDR Ricoh card reader I think anything else, the default Windows drivers will be sufficient. Let me know if you think I missed something thing please.

    Read the article

  • Where can I get drivers for Windows 8

    - by Capt.Nemo
    I own a Dell Inspiron 1545, which came pre-installed with Vista. I upgraded to 7, and Dell made special windows 7 drivers available. I cannot seem to find any such special driver downloads for Windows 8. Is there any place I can check for driver updates, and be notified if and when they become available. The required drivers include: - Webcam - Alps Touchpad - Broadcom Wifi Of these, the webcam and wifi default windows drivers are working fine. However the touchpad configuration needs the official drivers.

    Read the article

  • Is it possible to share a big-screen monitor - switching between personal Windows 7 laptop in the office?

    - by Nam Gi VU
    Hi everyone, This would be strange to ask this but I'll try a go :). The situation is as below. We use laptop & wifi in the office. We often make demo to each other and need to show the demo on a big screen mornitor hang in the middle of the room :). I want to switch the display between each of the staffs using LAN wifi network. Please give me some suggestions on how to do that. Thank you! Nam.

    Read the article

  • DLINK Dir-655 Sharing and connecting wirelessly

    - by CYREX
    I have a D-LINK DIR-655 and i wish to do the following: My PC is connected to the internet via eth0 (Wired) and it has a wireless card. I wish to connect to the DIR-655 Router and share my connection via the router but wirelessly. I do not want to connect via a cabled wired to the router. I want to connect to the router via wifi. After that i want to make the Router share the wireless connection am giving it to other PCs wirelessly. So the sharing and connecting in all PCs will be done via WiFi.

    Read the article

  • Attempting to caue packet loss with netem doesn't work - possibly because of NAT (but delay does work)

    - by tomdee
    I have traffic from a WIFI access point routed via an Ubuntu box. I have two network interfaces which are NATed *filter :INPUT ACCEPT [11:690] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [37:6224] -A FORWARD -s 192.168.2.0/24 -i eth1 -o eth0 -m conntrack --ctstate NEW -j ACCEPT -A FORWARD -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT COMMIT # Completed on Thu Mar 15 13:37:21 2012 # Generated by iptables-save v1.4.10 on Thu Mar 15 13:37:21 2012 *nat :PREROUTING ACCEPT [0:0] :INPUT ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] -A POSTROUTING -j MASQUERADE COMMIT If I run a ping app on an Android device connected to the WIFI network I can happily ping google. If I use netem to introduce some delay tc qdisc change dev eth0 root netem delay 100ms I can clearly see pings taking longer. If I use netem to introduce some packet loss tc qdisc change dev ifb0 root netem loss 50% then I see no change. Packet loss does work fine for locally generated traffic, just not for traffic coming in over the network that's being NATed. Any ideas how to sort this out?

    Read the article

  • What is the right way to use Internet Sharing in OS X?

    - by Bob King
    For a while now I've been using the Wireless in my Mac Mini as a seperate WiFi access point because my main router doesn't quite cover my whole house. There is a dedicated CAT 5E line down to the Mini, which has a static IP address. I've turned Internet Sharing on, using Airport/WiFi but it seems my options for security are limited. Can I do WPA2? Also, it seems like my iPhone only connects 25% of the time, and the rest of the time it claims I've given a bad password. I've tried "Forget this network" repeatedly.

    Read the article

  • Debian Wheezy, hostapd running but no AP detected by clients

    - by f0o
    I've an TL-WN951N (AR5416+AR5008) using ath9k module running an hostapd and a dhcp for it. So hostapd starts fine: $ hostapd wifi.test Configuration file: wifi.test Using interface int1 with hwaddr f4:ec:38:9b:d4:93 and ssid 'test' hostapd.conf: interface=int1 driver=nl80211 ssid=test channel=1 But nobody seems to find it or being able to see it or connect to it by setting BSSID to 'test'. I'm quite frustrated now, I find 'howto' after 'howto' from people with same chipsets and it always seemed to work out great for them - but not here... iw list even shows up the AP mode being present at the interface... Thanks for your help

    Read the article

  • Can't ping IPs for devices not part of Windows Domain

    - by GiddyUpHorsey
    I have a home network with a Trendnet wireless router and a Windows Domain. The DNS server is on a Windows 2000 Server and is configured to forward queries to DNS servers provided by the ISP. The router provides DHCP and is configured with the Windows 2000 Server as the DNS server. When I connect iPhones to the network over WiFi, the router can ping the iPhones through its browser based admin interface, but Windows machines that are part of the Windows Domain cannot. A laptop was connected to the network over WiFi that wasn't joined to the domain and it could see the iPhones. All machines either have a fixed or DHCP allocated IP on the 192.168.0.* subnet. How do I configure the DNS server or the Windows Domain so that Windows machines can see the iPhones?

    Read the article

  • windows hosted networok on windows 8

    - by tanmaysingh
    my sister is using Acer laptop, that has an intel WLAN card and supports windows hosted network(checked in command prompt).Am using the basic way using netsh wlan command also, then am using netsh start wlan command.The hosted network gets created and it could b seen in "Network and Sharing Center" as the . I also went to Device manager, selected WLan card, made sure"allow this device to wake computer from sleep" is selected. Now I went to the newly created , clicked properties, and under sharing enabled allow this to be shared(but I am not able to select The name of the wifi my sis wants to share (in this case her college wifi name, LEts say QP4,Ethernet and Local Area connection are the only two option that are coming). Also the SSID name is not being shown in her mobile nor when I click the tower icon at the tray area,Any suggestions on what might be going wrong?She is using windows 8. Should I look for updated drivers? Her laptop is only 6 months old, i don't think the drivers are outdated. Any advice shall be appreciated.

    Read the article

  • Network switching issues with MacOS 10.7?

    - by Denis
    I'm having a wired problem and hope somebody can tip me, what way should I dig to. I'm using MacBookPro with Lion 10.7.3 both at my working place & at home. At working place, we have a domain-based network with 802.1x authorization (more than 400 computers) and to connect it I'm using Ethernet cable. IP range is 10.10.2.*. All network settings are setup automatically by DHCP. Also, in settings, I have Network Account Server setup in the User&Groups Settings for my work Domain server - and it is available only from corporate network. At home, I have an ADSL router, that shares Internet connection by WiFi in NAT mode. I'm using WiFi to connect it. Router gives out addresses from 192.168.1.* range and all settings are also set up by router's DHCP. So, my problem is the following. When I come back home from the office, I open my MacBook and AirPort automatically connects my WiFi network. After this, for about 1 minute I'm able to browse sites & ping hosts successfully. But after this minute, network connection is broken down. All pings return time-out. trace route to google.com stops on 192.168.1.1 (which is my router). This lasts for 3-4 minutes. After that network connection is automatically repaired and all pings go smoothly again. At the same time, when my MacBook return timeouts, I can successfully ping any host from my wife's MacBook - so this doesn't look like router issue. When I come to the office, I don't have any issues and Internet connection is available & stable moments after ethernet cable plugged in. Do anybody has any clues about this? What should I monitor & what settings look for resolving this issue? Please, ask, what additional information should I provide. Hoping for good advice & thanks in advance!

    Read the article

  • Is it possible to sync specific router settings across multiple routers?

    - by Betard Fooser
    I recently purchased a second Linksys wireless routers set up on the other side of my home and I am wondering if it is possible to somehow sync particular settings between the two? For instance what I am really after is the "MAC Filter List". I would "like" to be able to maintain the list on both routers without having to manually type in the field values. maybe this isn't possible, or has an easy answer, but hopefully those of you who know will cut me a bit of slack. I tried to "google" the answer to this of course, but it seems any searches with the words "sync" and "router" and/or "wifi" result in pages of people having issues with synching their iOS devices over wifi. I would say that have decent amount of networking knowledge in regards to average home networks, and I imagine in larger businesses / corporations they must have a "simpler" way of maintaining things like this. Any insight to point me in the right direction will be much appreciated.

    Read the article

  • afp/smb transfers caps at 2 megabytes/sec, wireless N

    - by RD.
    I wanted to transfer files between two mac computers. The network is wireless-N and both computers have wireless-N modules in them. The problem is that when I transfer files between them, via file sharing (afp) the network speed caps at 2 megabytes/sec. Just downloading files from the internet I can get faster speeds, so this isn't a constriction of my wifi bandwidth, it appears to be a constriction of the protocol being used. My wifi-n is set to 130mbits, so I should see real world transfer speeds around 12-16 megabytes/sec I did this command on both computers sudo sysctl -w net.inet.tcp.delayed_ack=0 which is supposed to lower tcp overhead, but this did not affect it. How can I get the speed I am expecting?

    Read the article

  • Establish direct cable connection between Windows 8 PCs in home network

    - by Marie. P.
    I'm running two PCs, a desktop and a laptop with Windows 8 Release Preview ("Build 8400"). They are connected to the same router in infrastructure mode, thereby having wireless internet. Due to often file synchronization between the machines I want to establish a cable connection that allows direct file transfer, without needing to use the wireless. When I plug in the cable (normal, not cross-over), I see in "Control Panel\Network and Internet\Network Connections": "Ethernet - unidentified Network" on both PCs. Transferring a file between both still only uses the WiFi via the Router. I noticed that when turning off the wifi on one PC, I can set up a shared internet connection that will work via Ethernet-cable, but since sometimes only one PC runs, sometimes the other one, I do not want to have the internet of one machine to be dependent on the other one being switched on. I do not have a crossover-cable, but since I did connect the PCs already successfully (just without both being on the internet), I'm sure that this should also work with a normal ethernet cable.

    Read the article

  • Frequent connection drops when playing online games (StarCraft 2, Battlefield 3) and behind NAT - how to diagnose? [migrated]

    - by Moshev
    I am having some trouble with (I suspect) my wireless router. It's connected to the internet with a regular lan cable and has a static, public IP address. Our two home PCs connect to the router with regular lan cables, plus there's a laptop which connects over wifi. diagram: Internet | | <- isp-supplied cat5 ethernet cable | D-Link D300 ...wifi... laptop / \ / <- cable -> \ PC1 PC2 The PCs and laptop are behind NAT and share the router's public IP. The router is a D-Link D300. PC1 is used for online gaming and I'm experiencing frequent "connection dropped" errors when playing Battlefield 3, StarCraft 2 and the Diablo 3 beta; but not with TeamFortress 2 or the Tribes Ascend beta. The issue goes away when I remove the router and connect PC1 directly to the ISP's cable. I have also tried disconnecting PC2 and the laptop, leaving PC1 as the only machine connected to the router - doesn't help. How can I diagnose what precisely the issue is?

    Read the article

  • XDMCP is slow any ideas? (looking for alternative remote desktops)

    - by peteri
    I've been used to using RDP on Windows to remote to machines, and I've got an asus eee 701 which I want to use to do some *nix programming on. While the eee is a lovely little machine the screen and keyboard are a little small to use for lots of programming. I've tried using Xming (the free version) to remote login into the eee from my desktop using XDMCP (or even using a ssh session as a straight X11 server and no desktop on the eee) the whole thing seems seriously slow over wifi the initial desktop takes at least 5 seconds to paint (might even be 10 seconds I haven't actually timed it). So my real question is what do other folks use for remote control with a GUI for their *nix boxes? I am finding it hard to believe the performance is so bad over a wifi network (It makes the Mac IIs I used to use a college in 1988 seem fast) or is this just a problem with Xming and using say the Cygwin X11 server would be better.

    Read the article

  • Private VOIP network

    - by SuppositoryPlacebo
    I own a small private security services business. Some of my clients require 2-10 security officers per location. I'm trying to think outside the box in order to solve my communications problem. I'd rather not buy or lease hf radios or voip systems at the current rates. I'm wondering if there is an existing system, or if is at all possible, to setup a private communications network using only a server and bluetooth devices or a wifi/bluethooth combination. http://25.media.tumblr.com/tumblr_m44f0pn7BL1rwp6tgo1_1280.png I don't need "radio" per se. I just need a simple, private voip network. Is there an existing device that consists of nothing more than a wifi adapter to control a bluetooth device?

    Read the article

  • Cannot install wireless lan service on windows 2012 RTM offline

    - by user1763118
    I'm having trouble installing the wireless lan service offline with a fresh installed windows 2012 server RTM. I tried "install-windowsfeature wireless-networking" in the non-gui mode and using the server manager in the gui mode to enable the wireless lan service, but both of them show a "failure configuring windows updates" message after the installation restarted the system. I checked the event log and I think messages about "The WLAN Autoconfig service depends on the following service: nativewifip. This service might not be installed" are the source of the issue. Google shows it is a service called "native wifi filter", but I cannot find anywhere to install that service. I don't have a Ethernet adapter for that computer, so have to install everything offline before the wifi's working.

    Read the article

  • connecting internet TV modem to repeater router, will it work?

    - by Sandro Dzneladze
    I've internet TV at home, it works via special modem which connects to router via Lan interface. I'd like to move Tv to a room which has no router. so i'd like to use wifi for internet TV. My plan is this, buy another wifi router, set it to repeat sygnal of primary router and attach this TV modem to repeater router via Lan interface. Will this work? I have limited understanding of how internet TV works, so I'm not sure if my strategy will work... does router have to have some special feature to allow this service? will my strategy work?

    Read the article

  • Frequent connection drops when playing online games (StarCraft 2, Battlefield 3) and behind NAT - how to diagnose?

    - by Moshev
    I am having some trouble with (I suspect) my wireless router. It's connected to the internet with a regular lan cable and has a static, public IP address. Our two home PCs connect to the router with regular lan cables, plus there's a laptop which connects over wifi. diagram: Internet | | <- isp-supplied cat5 ethernet cable | D-Link D300 ...wifi... laptop / \ / <- cable -> \ PC1 PC2 The PCs and laptop are behind NAT and share the router's public IP. The router is a D-Link D300. PC1 is used for online gaming and I'm experiencing frequent "connection dropped" errors when playing Battlefield 3, StarCraft 2 and the Diablo 3 beta; but not with TeamFortress 2 or the Tribes Ascend beta. The issue goes away when I remove the router and connect PC1 directly to the ISP's cable. I have also tried disconnecting PC2 and the laptop, leaving PC1 as the only machine connected to the router - doesn't help. How can I diagnose what precisely the issue is?

    Read the article

  • Access Configuration Page of Modem (in bridge mode) through router

    - by Ujjwal Singh
    Given the Network Configuration: Internet (121.243.x.y/27) | (121.243.x.z) Static : Public Global IP Modem Bridge Mode | WiMAX (192.168.1.1/24) +169.254.1.1/24 : Modem Configuration Page | (192.168.1.2) Router DLink DIR 615 | Ethernet + WiFi (192.168.0.1/24) | Local network (192.168.0.2) Workstation Ethernet | no WiFi Is there any way, maybe using Routing Tables, to access the Modem configuration page at 169.254.1.1 from my local network, using a Windows 7 PC? Note that the modem is currently able to display its configuration page at 169.254.1.1, i.e. even while it is in bridge mode.

    Read the article

  • How can I restrict my mates to stop downloading?

    - by user239295
    We are sharing an internet broadband connection with 6 users at a place we live. We get 20 gb fup ( Fair usage policy) with 2 mbps speed from the ISP after the 20 gb is consumed the speed comes down to 512 kbps very difficult to browse any page. The problem is we cannot track which user/mate is downloading and ending the FUP. it is very difficult to track so is there something that we can allot per user some amount of space like 2 gb of downloading or restrict all from downloading so that we can utilize all the fup till the end of the month. We are using this connection as wifi configured. A adsl router is configured as wifi and we all using all 6 laptops. No PC. Any help would be appreciated. I apologize if i am not clear with my question.

    Read the article

  • Can a consumer wireless router act as both a wireless client and access point?

    - by glibdud
    I'm going to be moving in the future, and integrating my home network into that of my landlord. I wish to maintain an isolated network while using his internet connection, so I'm planning on cascading my router off of his (WAN-to-LAN type configuration). Unfortunately, it looks like it might not be feasible to run a wire between the two. Therefore, I'd like to send my WAN connection over WiFi to his router. At my disposal, I have a WRT54GL (running Shibby's Tomato mod), and I just bought an Asus RT-N66U (I can be flexible with the firmware). My first thought was to set up the WRT as a wireless bridge, then run a wire between that and the N66U's WAN port. I'm reasonably sure I could make that work, but can I eliminate the WRT from the equation altogether? Can the N66U connect to the landlord's WiFi as a client, effectively using that as the WAN port, while simultaneously providing wireless access to my devices on an altogether different WLAN?

    Read the article

< Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >