Search Results

Search found 2299 results on 92 pages for 'alec smart'.

Page 46/92 | < Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >

• ASUS EeePC 1001PX, hard disk clicking in Ubuntu Maverick

  - by MeanEYE

  I just received my new Asus EeePC 1001px netbook. After installing Ubuntu 10.10 on it, I've noticed that my hard drive is making a clicking noise. Now this is not a loud clicking noise nor it's constant (only sounds occasionally and when hard disk is not writing or reading anything). Another strange thing is, this only happens when netbook is using battery power, the moment I plug in AC power clicking stops. Additionally I noticed that when I go into BIOS I can hear the click only once, same thing happens if I boot Ubuntu from USB. That led me to believe the problem is within operating system. I did all the surface scans and SMART tests and everything seems to be fine. Now noise sounds like heads are trying to "park" themselves so I tried disabling "spin down" option in Power Management but it didn't help. Any idea?

  Read the article

• Clicks or ticks every minute when HDD is idle [closed]

  - by Ramy

  Possible Duplicate: Clicks or ticks every minute when HDD is idle My HDD is a My passport... It's 2 weeks old. I hear this tick or click followed by another one about 8-9 secs later, and they repeat every minute almost exactly... They usually happen and the LED light blinking.. It's not like the other clicks you hear that indicate any inevitable HDD failure, it's much lower in volume. I don't know what that is, however it's different than the rest of the HDD usual sounds...It's close to the sound of the mouse click. It sometimes also happens when I access a file on the drive mostly after being idle for a while, sometimes randomly not really sure... The drive though is working well, the SMART report comes out OK and without warning, and disk management shows it healthy... What could be the cause of this??

  Read the article

• Prevent Mac OS X from prompting disk initialization/formatting

  - by Just-A-User.A-Superuser

  I have a TrueCrypt partition. When I insert it in Mac OS X, it always prompt me to initialize the hard disk. Is there a way to prevent Mac OS X from detecting uninitialize hard disk? [UPDATE] By the way, as Truecrypt suggested while I'm in Windows, I must make partitions so the OS won't detect the hard drive as uninitialized. Windows respected that the drive already have contents by the mere fact that it has partitions, while Mac OS X thinks that it is still uninitialized. I think Mac OS X is trying to be smart by detecting if each partition has a valid filesystem id/marker.

  Read the article

• Solid Edge ST6 - 2D Modeling: dimensions

  - by juFo

  I'm currently making some 2D drawings in Solid Edge ST6. I have several circles which I need to change so that they have an equal diameter and equal space between both circles, etc... Currently my drawing looks a bit messy with all the dimensions that I use: I use the Smart Dimension tool and the Distance Between tool but I have no clue to make my drawing more readable by adding less dimensions. Is there a way to copy/paste dimensions or let a circle follow the dimensions of one other circle? I hope you understand the question. Thanks in advance (I could not find anything about Solid Edge, so I hope superuser is the correct place to ask.)

  Read the article

• How do you monitor the health of a mirrored disk in Windows?

  - by NitroxDM

  I have a Mirrored Dynamic disk on my Windows 2003 Server. How do you monitor the health of the volume? Is there a way to have the server send an email when there is an issue with the volume? Is there a way to have the server run S.M.A.R.T. tests? EDIT: Nothing says WTF like logging into a client server, running DISKPART LIST VOLUME and seeing this. Volume ### Ltr Label Fs Type Size Status Info ---------- --- ----------- ----- ---------- ------- --------- -------- Volume 0 X xDrive NTFS Mirror 233 GB Failed Rd Volume 1 C NTFS Simple 57 GB Healthy System Volume 2 D DVD-ROM 0 B Healthy Volume 3 F RAW Partition 466 GB Healthy Volume 4 E New Volume NTFS Partition 932 GB Healthy

  Read the article

• How can I shut down all my Virtual Machines when my UPS kicks in?

  - by Tim

  I have a Dell T610 running ESXi4, an APC Smart UPS 1000VA and a local "console" machine running Vista and the vSphere 4 Essentials pack. A dedicated management network is in place between the T610 and the Vista machine. We have 4 VMs: SBS 2003, Server 2003 running Terminal Services, and two XP Machines. Ideally, when the UPS is forced to use battery power [for a set number minutes], I would like to gracefully shutdown all the VMs, then the ESXi, then the console machine. The latter two are not strictly a priority, but the VMs within ESXi are. Google provided lots of deprecated scripts that used to work on ESXi 3.x or similar, however I am unable to find what they were deprecated by. What do I need to be able to do this? I have Powerchute Express as supplied with the UPS, but would be willing to pay for software if required.

  Read the article

• Is there a way to set up message moderation in Exchange 2007?

  - by Nate Pinchot

  Is there a way to get a feature in Exchange 2007 similar to message moderation in Exchange 2010 through the use of third party tools or otherwise? I've Googled things like "exchange 2007 outbound email approval" to no avail. We are working on getting Exchange 2010 implemented but I need an interim solution if at all possible. The reason for this is from a customer service perspective. I am willing to use a small process to be a smart host if needed. I would appreciate any suggestions or advice. Edit: My apologies, I should have been more clear that I am trying to moderate/approve outgoing email from certain users, not moderate/approve email sent to a distribution group.

  Read the article

• How can I troubleshoot SSD disconnection problems on Windows 7?

  - by 0xC0000022L

  I have a small SSD (Transcend StoreJet TS256GESD200K) which I am using on several computers. The drive is formatted with NTFS and recently I started noticing disconnects. Normally one probably wouldn't notice (you don't even get the notification sound in Windows when it disconnects), but since I use USBDLM and run a VM from that SSD, I get to see this first-hand. How could I best figure out whether the problem is the hardware (SSD, USB socket, USB cable or something in the PC) or software? In short: how can I locate the source of the disruption so that I can work on removing the problem? Side-note: SMART status for the SSD is clean.

  Read the article

• Disable RAID Controller

  - by B.Mr.W.

  I have some decent HP Proliants server that come with "HP Smart Array P410i Controller" enabled, I am using these boxes to set up a Hadoop cluster and I know, RAID is for sure a no-no for Hadoop since the application itself will take care of data redundancy and extra intelligence provided by RAID won't be helpful and might turn down the performance. I tried to disable the devices at the BIOS and the box cannot even access the disk afterwards. So I am assuming the controller is sitting between disks and mother board, and we have to turn it on and configure it to "level0" or something like that. I am wondering what should I do to "disable" the RAID functionality so it will fit into the Hadoop environment.

  Read the article

• Dell Power Edge R515 - Replacing a Bad Hard Drive in a RAID

  - by LonnieBest

  I've ordered a new hard drive to replace a bad one in a Dell Power Edge R515. The manual covers obvious topics regarding physical replacing of hard drives, but I've never done this before on a production server where RAID is involved. I've heard people talk about this topic, and I've heard that some servers have RAID controllers that are smart enough to allow you to just put in the new drive (hot swap), and then the server will know automatically how to rebuild that drive to be what the old one was to the system. Where do I find the proper procedure for replacing a failed hard drive on a live production Dell Power Edge R515? Can someone with experience tell me how easy or hard this usually is?

  Read the article

• How anti-virus on the host machne affects performance of virtual machines?

  - by Ladislav Mrnka

  I'm diagnosing some issue with Oracle virtual box where virtual machine sometimes perform terribly slow (much slower then notebook with worse configuration): Notebook i7 (2 cores with HT = 4 logical CPUs), 4GB RAM, 5400 rpm disk, Win 7 64bit Virtual machine (Oracle Virtual Box) Host: i7 (4 cores with HT = 8 logical CPUs, 12 GB RAM, system runs from SSD, virtual machine from 7200 rpm disk, Win 7 64bit) Virtual machine: 4 cores assigned, 8 GB RAM assigned, Win 2008 R2 Enterprise (64 bit) Virtual machine uses bridge to separate network interface (machine has two) VPN for network communication No other virtual machine runs on the host Host has installed ESET Smart Security All SW is updated with last version. My question is if anti-virus on the host machine can somehow affect performance of the virtual machine and if so how can I turn it off without turning the anti-virus itself?

  Read the article

• What is the effect on LVM snapshot size when a file block is rewritten with it's original contents?

  - by NevilleDNZ

  I'm exploring using LVM snapshot's to off site incremental archives from a snapshot "master" file system. In essence: simply copy across only the files on the "master" that have changed since the last incremental copy to the "archive". Then snapshot the "archive" to retain the incremental. I am a bit puzzled as to the block usage behaviour of the archive's own incremental snapshot. I'm expecting that LVM is not smart enough to know that the "file block" is actually unchanged, and the a new copy will be allocated and written for the fresh "archive" file system. Can anyone confirm this, or point me to a document/page that gives some hints? BTW: the OS hard disk cache, hard disk physical cache and hard disk itself also doesn't need to do any actual "disk writes" as the "disk block" likewise is unnecessary. Any pointers to discussion of this style of optimisation would also be ineresting.

  Read the article

• Expanding RAID 1 array size (Adaptec 1420SA controller)

  - by cincura.net

  I have an Adaptec 1420SA controller in server and RAID 1 array created. The old disks slowly started to report S.M.A.R.T errors so I replaced first one, rebuild array and then other one and rebuild the array again. But the new drives are bigger, so I'd like to expand the array to use full disk capacity. Is it somehow possible? In the Adaptec configuration utility, after POST, I didn't found anything that could do it. I still have the old drives, if it helps. The array is used for system (Windows 2008 R2 SP1) booting. Thanks.

  Read the article

• Virtual Network Printer

  - by user113720

  I'm pretty new to Microsoft Servers so don't blame me if the question isn't that smart [I'm a Unix guy]. I need to install a Virtual Printer of a Microsoft Server 2008 r2. The requirements are: The printer must print on a file {whatever file... txt or pdf } The printer must run on a server The printer must accept plaintext from a specific IP:port The connection between the device that prints and the server is a local network I've tried to install a virtual printer, but I cannot specify the constraint about the socket from which receive data to print. Thank you so much

  Read the article

• Same album repeatedly updates when syncing iTunes with iPhone

  - by Unsliced

  I have many many albums and tracks purchased via the iTunes store both through iTunes directly and via the iPhone. They all synchronise properly and are on iTunes eventually (i.e. if purcashed originally on the iPhone). There's one album, though, purchased via the iTunes app in June this year. Virtually every time I sync the iPhone it says "updating files" and this album gets updated. The rest of the sync goes just fine, new tracks added, listened to podcasts are removed, playlists are updated (notwithstanding that smart playlists' orderings are now utterly broken) fine - but this album is always getting updated. In finder I've looked at the permissions and nothing seems unusual. FWIW, I'm on Mac OS X 10.5.8, iPhone 3.1.2, iTunes 9.02. Anyone with any ideas? It's not a fundamental problem, but it does means that each sync takes an extra 30-60 seconds, which is annoying!

  Read the article

• Run disk error check on NTFS file?

  - by paulius_l

  I have a feeling that my system hard drive is dying. Benchmark kind of enforces it. Here is the benchmark of my system hard drive during low system activity: And here is the benchmark of backup drive: Furthermore, there are some files which I just can't touch because I get CRC errors and the hard drive activity spikes to 100% with operating speeds less than 1 MB/s while working with such files. I haven't yet tried swapping SATA cable as I have read this might cause the problems. Anyway, I would like to run some tests on specific clustsers where those files I am interested in are stored. I don't want to do the full chkdsk because it takes a very long time. I would like to either find the utility which executes the disk check directly on the clusters where the file belongs or a couple utilities where one tells me the cluster locations and another can check just those locations. How do I check and possibly fix disk errors where the files I am interested in are stored? Edit: S.M.A.R.T. info:

  Read the article

• Multi-account Google Apps Calendar Free-busy status?

  - by Andrew Bolster

  I have 3 google apps domain accounts and a personal google account, and until recently, there was little need for the google app's calendars to have any real use; Now however the powers that be finally discovered the smart re-scheduler and the other google tools for managing meetings and schedules; unfortunately I'm now in a position where I've got events notifications all over the place and because each of the calendars do not know about each other, I'm losing all of the advantages of rescheduler / free-busy status. TL;DR, 4 calendars, unified 'free busy' status without having to manually copy every event please.

  Read the article

• Locking down firmware to keep stolen laptop from being formatted?

  - by Matt Ridge

  On the Mac laptops there are ways through the terminal to lock down the computer so that if someone tries to format the computer they won't be able to do it without the password. This way locks down the firmware. Is there a universal way to do the same thing on a PC? I know there are brands out there such as Samsung, Dell, etc that utilize different fimware types, and in turn will mean that their firmware will be locked down differently. That being said is there a "command code" that will allow you to lock the firmware to keep theives from formatting the hard drive and wiping out your data? I know a person who has time, and knowledge can get any password, and hopefully the person is smart enough to use another password to lock down the firmware, but that's not what I'm asking. I'm asking if it's possible, and if so how? Does the standard PC user require a 3rd party app, or can it be done through the command line? Or Terminal if you are on Linux?

  Read the article

• Extracting streaming video from swf

  - by user1018733

  I am trying to speed up this video by 1.25x to 1.5x, udacity style. I tried grabbing the http://smart.if.uidaho.edu/courses/f2012/cs512/ using the Download Flash & Video Firefox plugin, but it only grabbed the swf player that streams the video. Is there any other way to download this video? (as well as future videos). As a final solution, I can use video capture software while I'm not using the computer, but I don't want that hassle and time delay if possible.

  Read the article

• Digitizing notes?

  - by Nimmy Lebby

  I want to digitize my note taking. I was looking into using tablets or something of that sort but I feel that it would be too much of a challenge to type instead of actually writing my notes during meetings. That got me thinking into looking into something like LiveScribe. It looks neat but I don't know how it would work in the real world. How does OCR work with something like smart pens? How is the desktop applications? Any experience? Does anyone have an alternative suggestions? Positives and negatives? Any advice would be helpful.

  Read the article

• How Do You Stress-Test Your Hard Drives?

  - by MetaHyperBolic

  When looking for large new drives (= 1 TB) on newegg and the like, I note a number of reviews talking about drives being either D.O.A. or hitting the Click of Death (or even releasing the Magic Smoke) within a week or so of use. A portion of the reviews mention this phenomenon whether the drive in question is Western Digital or Hitachi or whatever. For those of you using Windows, what do you to: 1) Place a large initial stress on the drive to see if it can take it? For how long? 2) Test the drive afterwards (presumably with some sort of S.M.A.R.T. tool or others) to see if any negative changes have been noted? Note: This is one component of a larger plan for both high-availability and backups for my home data.

  Read the article

• In 2011, what are the reasons to stick with plain text mails?

  - by Aaron Digulla

  People entering college today have never known a world without an Internet. HTML was invented 1980, that's more than thirty years ago or 1.5 generations. But plain text mails are still common despite all their problems: Encoding issues Wrapped code segments No links No way to use the "a picture says more than a thousand words" lore Most of the security risks are now handled by the underlying browser engine and smart settings like: Don't allow JavaScript in mails Don't execute attachments Don't download external resources (like web bugs) On top of that, only very few people still read mail only in command line tools like Mutt. Knowing Mutt myself, I'm pretty sure you can configure it to display HTML mail with, say, w3m. On top of that, most HTML mail capable clients send two versions of the mail (pure text with an HTML attachment). I'm not sure if there are any people left on the planet which still use a 56kbit modem to access their mail accounts. So what reasons are left to stick with plain text mails in 2011?

  Read the article

• Rename file in XP, only select file name, but show file extension.

  - by RasmusWriedtLarsen

  So if I have a file called: test.txt and I want to rename it, there are two options (depending on the Show already known file extension option): 1) ON: it selects everything (test.txt), meaning I have to manually select "test" and replace it with the new filename. (which is irritating) 2) OFF: Only "test" is editable (and visible). Problem is that I frequently need to change the file extension of a file, but if the option is turned on, it's a pain to change the file name. I know that in Win7 it does something smart: It only selects the file name when you press rename[F2], but also lets you edit the file extension. Is there a way to accomplish this?

  Read the article

• How to prevent people taking software home?

  - by Robert MacLean

  Most companies I have worked at have had either a collection of disks or a network share with the installs of the commonly used software in them. This is to allow the IT dept and skilled users to install the software they need on their work machines very easily. However some users would see this as an opportunity to get "free" software for their home machines. I've seen the draconian approach of locking the machine down completely, but that does not work well (in my view - if you disagree feel free to comment on it) because You add so much extra work to IT Users get that big brother feeling So how do you find a way to prevent users from taking home software but still allowing them to install what they need? You can make the assumption that most of the users in the organisations I work in are smart enough to install software, I'm not worried about the tea lady here.

  Read the article

• Unable to create a Windows 7 system image of a failing hard drive

  - by Rahul

  The hard disk of my one year old T400 Thinkpad has started failing periodic hardware tests. I get a "Targeted Read Test Failed" error. The "SMART short self test" times out. I am now trying to create a Windows 7 System image of the hard disk but it fails without giving any specific error messages. I tried using Comodo Backup but got an error (code 101117) there as well. I have copied the important files in Dropbox but would like to take a full System backup as I have plenty of software installed on the machine. Does anyone know why this is happening and how I can take a backup of the system image ?

  Read the article

< Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >