Search Results

Search found 2602 results on 105 pages for 'dell vostro'.

Page 46/105 | < Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >

  • How do laptop battery voltages affect runtime?

    - by Bigbio2002
    I ordered a new battery for my faithful XPS M1710. I'm not sure of the voltage of the battery I have now, but the new one that the Dell rep got me (after 3-4 times confirming my phone number and laptop model number) is 14.8v. I was a bit concerned about potential incompatibilities (as most of the other compatible batteries listed were 11.1v), but I figure that there's no way that Dell would "recommend" batteries that wouldn't work or fry your system. Now, my question is, how does voltage affect battery life? If we assume the needed power draw to be constant, a higher voltage would indicate less amperage needed, therefore the battery would last longer before running out, yes? Or am I missing something? For reference: P=I*V P = power I = current V = voltage (duh)

    Read the article

  • How to play audio through a bluetooth headset in Windows 7.

    - by palehorse
    I recently did an in-place upgrade from Vista to Windows 7 RTM. For the most part, things have went brilliantly. The only issue I've been facing is regarding my bluetooth headset, a Dell BH200. The laptop is an Inspiron 1720. I can get Windows 7 to pair with the headset, and even get the bluetooth settings to show that there is stereo audio available. The problem is that the bluetooth headset never shows up in my sound output devices list. I've uninstalled and reinstalled the bluetooth drivers from Dell, tried turning on/off all of the features of the headset, removing the bluetooth driver and letting windows redetect and install but nothing has worked so far. I guess I should mention that the headset worked fine in Vista. Anyone have any ideas?

    Read the article

  • Viewsonic VG2427wm detected max resolution too low

    - by Hassan
    So I have a Viewsonic VG2427wm, which supports max resolution of 1920x1080 and I had it working at this resolution from both windows and linux PCs. Now, I need to connect it to my Dell XPS17 (L702x), which has only DP mini and HDMI, so I'm trying to connect this monitor via HDMI-to-DVI adapter (doesn't work at all) and via DP-mini-to-DVI adapter. The later works, but is limiting my max resolution to 1680x1050. Using same two adapters to connect my dell monitor works fine, so I don't suspect any of the adapters to be faulty. The driver is the latest viewsonic driver (although it's been last updated 3 years back). Any ideas, how I can force it to display it's correct native resolution?

    Read the article

  • Computer Loses connection to router

    - by ajon
    I have a new Windows 8 Dell XPS desktop computer at work. It has a Dell Wireless 1703 802.11 b/g/n (2.4ghz) wireless adapter. sporadically throughout the day I lose internet connectivity. When I click on the wireless system tray icon, my companies router does not appear in the list. No other computer on the network is losing connection, only this one. I don't even know what to check. Could it be an ip conflict that causes me to get booted off? (I use DHCP), but why wouldn't my computer be able to see the network. The next time it happens I will see what happens when I try to access the router directly.

    Read the article

  • Image doesn't fill monitor when connected via HDMI

    - by russau
    Connecting a Dell Studio Slim to a Dell ST2210 21.5" monitor. The PC has a ATI Radeon HD 4350 video card. The video card has DVI and HDMI connections. When I connect with the DVI everything works fine. When I connect with the HMDI the image doesn't fill the screen, i.e. there's a approx 1 inch black border around the image. Win7 tells me the res is 1920x1080 (the native res of the monitor). Tried rebooting, no luck.

    Read the article

  • BSOD after PC has been running for a while

    - by user1389999
    I'm having a problem where my computer is getting a blue screen. I have noticed that the BSOD happens after the PC has been running for about 2 days. The BSOD's seem to be an error with atikmpag.sys with an error code of 0x00000116. The problem started about a month ago.It has happened all five times that I left my computer on that long in the past month. Because my computer is a pre-built one from Dell, and I had upgraded the graphics card (at least a year ago) to a more demanding one, I replaced the stock 360W power supply that came with it. I replaced it with a more powerful, 680W one, because it seemed like the problem could be related to a lack of power supply wattage, but it didn't affect the problem at all. Here are the minidump files for the five BSOD's that I have experienced: https://dl.dropbox.com/u/3488338/bsoddumps.zip System info: Windows 7 Home Premium x64 Dell Studio XPS 435MT Radeon HD 5670 (Version 12.4 of the Catalyst driver) Intel Core i7 920 2.67 GHz 6GB of RAM

    Read the article

  • Viruses on external hard drive -- how to clean files?

    - by Jade
    Last year my Dell laptop caught some pretty nasty viruses; I saved all my important stuff on an external hard drive. In an unrelated turn of events, I replaced my Dell with a Mac and have been able to retrieve data from the hard drive without trouble. The problem is, I'm sure the hard drive has a few lingering viruses and I really don't want to infect any more PCs with it. I was planning to reformat it anyway, but I'd like to be able to save my files. Would transferring those files to my Mac and then scanning them for Windows viruses before throwing them back onto the newly reformatted hard drive be enough?

    Read the article

  • Intel HD 4000 driver not working

    - by Sagar Parakh
    I have a Dell Inspiron 15r se 7520. I have upgraded my system to Windows 8.1 few days back. After the upgrade, my Intel HD 4000 graphics driver stopped working. I have downloaded the latest driver from Dell website but during installation it said that my graphics driver is not compatible or validated and also my dedicated graphics driver AMD ATI Raedon HD 7730m also stopped working. There is also a problem with my screen brightness: I am unable to change it. How to make my graphics driver work?

    Read the article

  • Can I use dis-similar HW for Win2008r2 DFS-R

    - by cwheeler33
    The setup: Windows 2008R2 Ent on two machines. The roles on each server will include File Servers and DC's. The machines come from two different vendors (Dell/HP) The Dell is an Athlon and the HP is an Intel. Both have roughly the same speed CPU and 8GB of RAM. They have different Raid controllers, and more or less the same amount of disk space (roughly 6TB.) Can the servers use different types of hardware? Is there any documentation about this? The last question I have is about the network. Can DFS-R be forced to use a differen subnet from the regular network?

    Read the article

  • Network card dies when trying to wake up laptop from sleep

    - by Bugmaster
    I have a Dell XPS 1640 laptop (aka Dell Studio XPS 16), running Vista. Whenever the laptop wakes up from sleep, my Broadcomm LAN card immediately dies. Any attempt to access it completely locks up whichever program I use to access it. There appears to be no way to re-awaken the card, other than rebooting; note that Vista does not even shut down properly if some program is waiting for the card. So far, I have tried the following: Disabled the "allow your computer to shut down this device to save power" in the device properties. This had no effect. Attempted to disable and then enable the card in the device properties. No effect. Tried ipconfig /renew: this locks up ipconfig to the point where I can't even kill its process. Force-install updated drivers from broadcomm: no effect. Does anyone have any other ideas ?

    Read the article

  • upgrade to windows8

    - by Siddharth Warrier
    I have a dell inspiron N5010 laptop. I am planning to upgrade to windows 8 and the existing version is windows 7. So when I planned to upgrade I found that in the website of dell they have not updated the drivers for windows 8. I had installed a preview version of windows 8 and installed the drivers of windows 7 so it got installed and is working fine. So shall I upgrade it to windows 8 and use windows 7 drivers???? or wait till the drivers are updated??????

    Read the article

  • I can't set the resolution to that recommended by my monitor

    - by F4r-20
    Firstly, I have looked here but didn't find what I needed. I have a Dell Optiplex 380 only using the on-board graphics (believe its the Intel G41 Express Chipset) but I can't seem to get the resolution right. The monitor I'm using (HP LE1901w) wants me to use 1440x900 but the only options I get are: 1600 x 1200 1366 x 768 1360 x 768 1280 x 1024 1280 x 960 1152 x 864 1024 x 768 800 x 600 So it will allow me to go higher or lower but not 1440x900. I've tried getting the driver from various different sources (Dell, Intel, Windows 7 Update) but still can't get that option. Does anybody know what else I can try?

    Read the article

  • Teaming/Spanning Switch Ports

    - by KTech
    I like to team NICs on my servers. Since most workstations are giga-bit anymore I want to provide my servers a bit more bandwidth. I've read various things that say I am/am not supposed to bond the ports on the switch. I see benefit in doing it as I'm not sure how the switch ARP table handles the same MAC address on multiple ports. Suggestions on the "ideal" way to do it? If it matters, I have mix (various locations) of Dell and HP, web managed, Layer 2 switches. Servers are mostly Dell with Broadcom NICs.

    Read the article

  • External monitor turning black intermittently

    - by coding crow
    I have installed an external monitor (Dell ST2220L, 21.5 inch) on my laptop (Sony Vaio). I am using a DVI-D cable for connection. Since the laptop does not have a DVI-D port, I have connected a DVI-D to HDMI connector on the laptop end and inserted the cable in HDMI port of the laptop.. I have switched off the laptop display and adjusted the screen resolution on the Dell external monitor to 1920 x 1080 and adjusted colors for the Windows 7 and brightness and contrast from the monitor. The problem is the monitor turns of blank intermittently for 1-2 seconds and turns on again at random interval. What could be the reason for this and how to get rid of this problem?

    Read the article

  • Can I create an Infrastructure access point from built-in WiFi (as opposed to Ad-Hoc) on Windows XP?

    - by evilspoons
    I want to use my Windows XP laptop as an access point. What I am trying to achieve is possible under Windows 7 with a myriad of utilities, but the wireless driver stack was different before Windows 7 and those specific APIs don't exist on XP. The reason behind me wanting to do this is that I would like my Android phone to be able to connect via WiFi to a network that is only hard-wired (reverse tethering). Unfortunately, my Android device (Galaxy S Captivate) does not support ad-hoc networks without a serious amount of screwing around. Is it possible to create an "Infrastructure" network with my Dell Latitude D830's built-in WiFi - a "Dell Wireless 1395 WLAN Card", which I am assuming is probably rebadged Broadcom, or is there some fundamental difference between a wireless adapter and an access point that would prevent this?

    Read the article

  • Trying to build a history of popular laptop models

    - by John
    A requirement on a software project is it should run on typical business laptops up to X years old. However while given a specific model number I can normally find out when it was sold, I can't find data to do the reverse... for a given year I want to see what model numbers were released/discontinued. We're talking big-name, popular models like Dell Latitude/Precision/Vostro, Thinkpads, HP, etc. The data for any model is out there but getting a timeline is proving hard. Sites like Dell are (unsurprisingly) geared around current products, and even Wikipedia isn't proving very reliable. You'd think this data must have been collated by manufacturers or enthusiasts, surely?

    Read the article

  • ABNORMAL LAPTOP RESTART

    - by KIUFELIX
    My dell vostro laptop keeps on restarting when I'm busy using it without commanding it to do so.I'm using windows 7 for O.S.What might be the problem?How can I solve it?Please someone help!

    Read the article

  • ABNORMAL LAPTOP RESTART

    - by KIUFELIX
    My dell vostro laptop keeps on restarting when I'm busy using it without commanding it to do so.I'm using windows 7 for O.S.What might be the problem?How can I solve it?Please someone help!

    Read the article

  • Windows 7 unidentified network (or limited access) after hibernate.

    - by null
    My windows 7 network will show limited access or unidentified network after coming up from hibernation. In the office I normally use LAN connection, I turn-off my wireless card (DELL Latitude has on/off switch for the wireless card). When I back at home I will turn on the wireless card, but it will take about 15 seconds to detect my home WIFI and then show limited access. I will have to restart the notebook and it will be able to connect to my WIFI and internet. The problem will be solved if I restart the notebook, but that defeats the purpose of hibernation doesn't it? I have tried uninstalling the wireless card driver but still does not solve it. I also tried updating my network card driver but windows says I am using the latest driver. On support.dell.com also showing I am using the latest driver.

    Read the article

  • Large recovery partitions

    - by Unsigned
    Is there any good reason as to why factory restore partitions are generally much larger than they need to be? Examples I have found in my own experience: Dell XPS laptop Partition: 13.67 GB Used: 6.68 GB Dell Inspiron laptop Partition: 14.7 GB Used: 7.2 GB Toshiba laptop Partition: 15.3 GB Used: 9 GB In all cases, shrinking the partition to only slightly more than the Used space had no ill effects on future factory restorations. Why the exorbitant amount of extra space, given that neither of the three computers ever writes any data to the recovery partition? Is there a good reason I'm overlooking?

    Read the article

  • Unity 3D (with Nvidia driver) becomes very slow and laggy

    - by Graham
    How can I prevent my Unity 3D desktop from becoming slow after a while, given that I have an Nvidia Quadro NVS 290 graphics in TwinView mode? The desktop starts out fast on login, but becomes slow / lagging / hesitant / high latency after a while, symptoms being spikes in CPU usage by /usr/bin/X whenever I cause any graphical activity with the mouse or keyboard (e.g. typing, changing tabs, dragging windows). The desktop remains slow even with all windows (except htop in Terminal) and extraneous processes killed. Detail: Changing tabs in Terminal takes about a second, and X spikes to 76% CPU. As I type into Firefox, X spikes to 95% CPU. Dragging Termiinal window, X goes to 70% CPU. Basically, every graphical action sends CPU usage of X through the roof. Device: Nvidia Quadro NVS 290 Driver package: binary driver nvidia-current-updates (280.13-0ubuntu5) Dual Monitors: Pair of DELL UltraSharp 1908FP in TwinView (X screen 2560x1024) OS: Fresh install of Ubuntu 11.10 amd64 Desktop with all updates. Hardware: Dell Precision T5400 Workstation Pastebin of Xorg.0.log Pastebin of xorg.conf Pastebin of nvidia-xconfig -t output (easier to read than xorg.conf) Output of /usr/lib/nux/unity_support_test -p: To obtain the following htop screenshow I typed "asdf" several times in in this text box, alt-tabbed to Terminal and took a screenshot of the high X CPU usage. This also happens when firefox is not running: Quadro NVS 290 has "No" thermal sensor according to sensors-detect: Next adapter: NVIDIA i2c adapter 0 at 2:00.0 (i2c-0) Do you want to scan it? (YES/no/selectively): Client found at address 0x50 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No P robing for `SPD EEPROM'... No Probing for `EDID EEPROM'... Yes (confidence 8, not a hardware monitoring chip) I tried the nouveau driver by disabling the nvidia-current-updates under Additional Drivers, but Ubuntu and xrandr -q fail to detect the second monitor. This may be issue 737349. Funniest thing is that Nouveau wiki says that XRandR 1.2 dual-monitor is supported so it should work with a second monitor.

    Read the article

  • Brand new battery is 100% charged but at 0% capacity

    - by Chris Conway
    I just bought a brand new battery to replace one that had seemingly died. I followed the instructions that came with the battery and charged it overnight, then ran my computer on battery until it was in a critical state and charged it overnight again. Now the battery appears to be 100% charged and at the same time at 0% capacity—when it's plugged in it doesn't charge and when it's unplugged the computer immediately goes into low power mode. I've taken the battery out and checked the contacts. I've rebooted the system with and without the battery. Nothing seems to help. I'm not sure if I should blame the battery, the laptop, the charger, or the power management software for this state of affairs. The obvious answer would be the battery but I bought this battery because another year-old battery exhibited similar behavior—I assumed it was dead and a Dell tech came to the same conclusion. I'm loathe to order another new battery without first exploring other explanations. What can I do to diagnose this problem? Here's the /proc info: $ cat /proc/acpi/battery/BAT0/state present: yes capacity state: critical charging state: charged present rate: 1 mA remaining capacity: 0 mAh present voltage: 9754 mV $ cat /proc/acpi/battery/BAT0/info present: yes design capacity: 6600 mAh last full capacity: 6789 mAh battery technology: rechargeable design voltage: 11100 mV design capacity warning: 660 mAh design capacity low: 200 mAh cycle count: 0 capacity granularity 1: 66 mAh capacity granularity 2: 66 mAh model number: DELL WK serial number: 4043 battery type: LION OEM info: SMP

    Read the article

< Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >