Search Results

Search found 2629 results on 106 pages for 'idle timer'.

Page 46/106 | < Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >

• Again WPA Connection problem even after changed to latest version ..please help

  - by Renjith G

  I am using hostapd, wireless tools with madwifi for my wireless ap in my board. The WEP, WPA-PSK connections and communications between my board with linux and my desktop PC, Windows XP SP2 (with Olitec USB wireless) are fine. But when I configured the WPA type, the connection seems established but shows the status "TKIP - Key Absent" in the security dialog box. Anyone faced this problem? Am attaching the conf files and the connection status. In the AP side am complaining . I am using the in built radius server conf with the hostapd 0.4.7 hostapd.conf interface=ath0 driver=madwifi logger_syslog=0 logger_syslog_level=0 logger_stdout=0 logger_stdout_level=0 debug=0 eapol_key_index_workaround=1 dump_file=/tmp/hostapd.dump.0.0 ssid=Renjith G wpa wpa=1 wpa_passphrase=mypassphrase wpa_key_mgmt=WPA-EAP wpa_pairwise=TKIP CCMP wpa_group_rekey=600 macaddr_acl=2 /* commented */ ieee8021x=1 /* commented */ eap_authenticator=1 own_ip_addr=172.16.25.1 nas_identifier=renjithg.com auth_server_addr=172.16.25.1 auth_server_port=1812 auth_server_shared_secret=key1 ca_cert=/flash1/ca.crt server_cert=/flash1/server.crt eap_user_file=/etc/hostapd.eap_user hostapd.eap_user "*@renjithg.com" TLS And the commands am using are wlanconfig ath0 create wlandev wifi0 wlanmode ap iwconfig ath0 essid Renjith channel 6 ifconfig ath0 192.168.25.1 netmask 255.255.255.0 up hostapd -ddd /etc/hostapd.conf Please correct if am wrong .. Also am getting the debug messages on my AP when am connecting in my windows machine through WPA ~/wlanexe # ./hostapd -ddd /etc/hostapd.conf Configuration file: /etc/hostapd.conf Line 18: obsolete eap_authenticator used; this has been renamed to eap_server madwifi_set_iface_flags: dev_up=0 Using interface ath0 with hwaddr 00:0b:6b:33:8c:30 and ssid 'Renjith G wpa' madwifi_set_ieee8021x: enabled=1 madwifi_configure_wpa: group key cipher=1 madwifi_configure_wpa: pairwise key ciphers=0xa madwifi_configure_wpa: key management algorithms=0x1 madwifi_configure_wpa: rsn capabilities=0x0 madwifi_configure_wpa: enable WPA= 0x1 madwifi_set_iface_flags: dev_up=1 madwifi_set_privacy: enabled=1 WPA: group state machine entering state GTK_INIT GMK - hexdump(len=32): 9c 77 cd 38 5a 60 3b 16 8a 22 90 e8 65 b3 c2 86 40 5c be c3 dd 84 3e df 58 1d 16 61 1d 13 d1 f2 GTK - hexdump(len=32): 02 78 d7 d3 5d 15 e3 89 9c 62 a8 fe 8a 0f 40 28 ba dc cd bc 07 f4 59 88 1c 08 84 2b 49 3d e2 32 WPA: group state machine entering state SETKEYSDONE madwifi_set_key: alg=TKIP addr=00:00:00:00:00:00 key_idx=1 Flushing old station entries madwifi_sta_deauth: addr=ff:ff:ff:ff:ff:ff reason_code=3 Deauthenticate all stations l2_packet_receive - recvfrom: Network is down Wireless event: cmd=0x8c03 len=20 New STA WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 WPA: 00:0a:78:a0:0b:09 WPA_PTK_GROUP entering state IDLE WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION2 IEEE 802.1X: 4 bytes from 00:0a:78:a0:0b:09 IEEE 802.1X: version=1 type=1 length=0 Wireless event: cmd=0x8c04 len=20 madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state DISCONNECTED WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument Wireless event: cmd=0x8c03 len=20 New STA WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 WPA: 00:0a:78:a0:0b:09 WPA_PTK_GROUP entering state IDLE WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION2 IEEE 802.1X: 4 bytes from 00:0a:78:a0:0b:09 IEEE 802.1X: version=1 type=1 length=0 < Register Fail < Register Fail Wireless event: cmd=0x8c04 len=20 madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state DISCONNECTED WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument Wireless event: cmd=0x8c03 len=20 New STA WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 WPA: 00:0a:78:a0:0b:09 WPA_PTK_GROUP entering state IDLE WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION2 IEEE 802.1X: 4 bytes from 00:0a:78:a0:0b:09 IEEE 802.1X: version=1 type=1 length=0 NOW am getting the following error message with latest tools. *This is the latest error messages..please refer this only..* ~/wlanexe # ./hostapd -ddd /etc/hostapd.conf TLS: Trusted root certificate(s) loaded madwifi_set_iface_flags: dev_up=0 madwifi_set_privacy: enabled=0 BSS count 1, BSSID mask ff:ff:ff:ff:ff:ff (0 bits) Flushing old station entries madwifi_sta_deauth: addr=ff:ff:ff:ff:ff:ff reason_code=3 ioctl[IEEE80211_IOCTL_SETMLME]: Invalid argument madwifi_sta_deauth: Failed to deauth STA (addr ff:ff:ff:ff:ff:ff reason 3) Could not connect to kernel driver. Deauthenticate all stations madwifi_sta_deauth: addr=ff:ff:ff:ff:ff:ff reason_code=2 ioctl[IEEE80211_IOCTL_SETMLME]: Invalid argument madwifi_sta_deauth: Failed to deauth STA (addr ff:ff:ff:ff:ff:ff reason 2) madwifi_set_privacy: enabled=0 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=0 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=1 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=2 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=3 Using interface ath0 with hwaddr 00:0b:6b:33:8c:30 and ssid 'RenjithGwpa' SSID - hexdump_ascii(len=11): 52 65 6e 6a 69 74 68 47 77 70 61 RenjithGwpa PSK (ASCII passphrase) - hexdump_ascii(len=12): 6d 79 70 61 73 73 70 68 72 61 73 65 mypassphrase PSK (from passphrase) - hexdump(len=32): a6 55 3e 76 94 8b d9 81 a1 22 5e 24 29 83 33 86 11 a8 7e 93 19 7c a9 ab ab cc 12 58 37 e5 35 b6 RADIUS local address: 172.16.25.1:1024 madwifi_set_ieee8021x: enabled=1 madwifi_configure_wpa: group key cipher=1 madwifi_configure_wpa: pairwise key ciphers=0xa madwifi_configure_wpa: key management algorithms=0x1 madwifi_configure_wpa: rsn capabilities=0x0 madwifi_configure_wpa: enable WPA=0x1 WPA: group state machine entering state GTK_INIT (VLAN-ID 0) GMK - hexdump(len=32): [REMOVED] GTK - hexdump(len=32): [REMOVED] WPA: group state machine entering state SETKEYSDONE (VLAN-ID 0) madwifi_set_key: alg=TKIP addr=00:00:00:00:00:00 key_idx=1 madwifi_set_privacy: enabled=1 madwifi_set_iface_flags: dev_up=1 ath0: Setup of interface done. l2_packet_receive - recvfrom: Network is down Wireless event: cmd=0x8b1a len=24 Wireless event: cmd=0x8c03 len=20 New STA ioctl[unknown???]: Invalid argument madwifi_process_wpa_ie: Failed to get WPA/RSN IE Failed to get WPA/RSN information element. Data frame from not associated STA 00:0a:78:a0:0b:09 Wireless event: cmd=0x8c04 len=20 Wireless event: cmd=0x8c03 len=20 New STA ioctl[unknown???]: Invalid argument madwifi_process_wpa_ie: Failed to get WPA/RSN IE Failed to get WPA/RSN information element. Data frame from not associated STA 00:0a:78:a0:0b:09 Data frame from not associated STA 00:0a:78:a0:0b:09 Data frame from not associated STA 00:0a:78:a0:0b:09 Wireless event: cmd=0x8c04 len=20 Wireless event: cmd=0x8c03 len=20 New STA ioctl[unknown???]: Invalid argument madwifi_process_wpa_ie: Failed to get WPA/RSN IE Failed to get WPA/RSN information element. Data frame from not associated STA 00:0a:78:a0:0b:09

  Read the article

• App crashes after a few seconds

  - by Declan Scott

  when i launch my app, on trying to do something, it will crash after a couple of seconds. I have warnings of warning: incorrect implementation of "downloadTextViewCOntroller. I also have "method definiton for -timerFinished not found and"method definiton for -timerFinished not found" this is my .m plese help me. the .h is also t the bottom // // downloadTextViewController.m // downloadText // // Created by Declan Scott on 18/03/10. // Copyright MyCompanyName 2010. All rights reserved. // #import "downloadTextViewController.h" @implementation downloadTextViewController @synthesize start; -(IBAction)tapit { start.hidden = YES; } -(void)accelerometer:(UIAccelerometer *)accelerometer didAccelerate:(UIAcceleration *)acceleration { if (fabsf(acceleration.x) 2.0 || fabsf(acceleration.y) 2.0 || fabsf(acceleration.z) 2.0) { UIAlertView *alert = [[UIAlertView alloc] initWithTitle:nil message:@"This app was developed by Declan Scott and demonstrates NSURLConnection and NSMutableData" delegate:self cancelButtonTitle:@"OK" otherButtonTitles:nil]; [alert show]; [alert release]; } } (NSString *) saveFilePath { NSArray *pathArray = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES); return [[pathArray objectAtIndex:0] stringByAppendingPathComponent:@"savedddata.plist"]; } (void)applicationWillTerminate:(UIApplication *)application { NSArray *values = [[NSArray alloc] initWithObjects:textView.text,nil]; [values writeToFile:[self saveFilePath] atomically:YES]; [values release]; } (void)viewDidLoad { UIAccelerometer *accelerometer = [UIAccelerometer sharedAccelerometer]; accelerometer.delegate = self; accelerometer.updateInterval = 1.0f/60.0f; NSString *myPath = [self saveFilePath]; NSLog(myPath); BOOL fileExists = [[NSFileManager defaultManager] fileExistsAtPath:myPath]; if (fileExists) { NSArray *values = [[NSArray alloc] initWithContentsOfFile:myPath]; textView.text = [values objectAtIndex:0]; [values release]; } // notification UIApplication *myApp = [UIApplication sharedApplication]; // add yourself to the dispatch table [[NSNotificationCenter defaultCenter] addObserver:self selector:@selector(applicationWillTerminate:) name:UIApplicationWillTerminateNotification object:myApp]; [super viewDidLoad]; } // Implement viewDidLoad to do additional setup after loading the view, typically from a nib. - (IBAction)fetchData { loadingAlert = [[UIAlertView alloc] initWithTitle:@"Loading…\n\n\n\n" message:nil delegate:self cancelButtonTitle:@"Cancel Timer" otherButtonTitles:nil]; [loadingAlert show]; UIActivityIndicatorView *activityView = [[UIActivityIndicatorView alloc] initWithActivityIndicatorStyle:UIActivityIndicatorViewStyleWhite]; activityView.frame = CGRectMake(139.0f-18.0f, 60.0f, 37.0f, 37.0f); [loadingAlert addSubview:activityView]; [activityView startAnimating]; timer = [NSTimer scheduledTimerWithTimeInterval:10.0f target:self selector:@selector(timerFinished) userInfo:nil repeats:NO]; NSURLRequest *downloadRequest = [NSURLRequest requestWithURL:[NSURL URLWithString:@"http://simpsonatyapps.com/exampletext.txt"] cachePolicy:NSURLRequestReloadIgnoringCacheData timeoutInterval:1.0]; NSURLConnection *downloadConnection = [[NSURLConnection alloc] initWithRequest:downloadRequest delegate:self]; if (downloadConnection) downloadedData = [[NSMutableData data] retain]; else { // Error } } (void)connection:(NSURLConnection *)downloadConnection didReceiveData:(NSData *)data { [downloadedData appendData:data]; NSString *file = [[NSString alloc] initWithData:downloadedData encoding:NSUTF8StringEncoding]; textView.text = file; // get rid of alert [loadingAlert dismissWithClickedButtonIndex:-1 animated:YES]; [loadingAlert release]; /// add badge [[UIApplication sharedApplication] setApplicationIconBadgeNumber:1]; } (void)didReceiveMemoryWarning { // Releases the view if it doesn't have a superview. [super didReceiveMemoryWarning]; // Release any cached data, images, etc that aren't in use. } (void)viewDidUnload { // Release any retained subviews of the main view. // e.g. self.myOutlet = nil; } (void)dealloc { [super dealloc]; } (NSCachedURLResponse *)connection:(NSURLConnection *)connection willCacheResponse:(NSCachedURLResponse *)cachedResponse { return nil; } @end // // downloadTextViewController.h // downloadText // // Created by Declan Scott on 18/03/10. // Copyright MyCompanyName 2010. All rights reserved. // import @interface downloadTextViewController : UIViewController { IBOutlet UITextView *textView; NSMutableData *downloadedData; UIAlertView *loadingAlert; NSTimer *timer; IBOutlet UIButton *start; } - (IBAction)fetchData; - (IBAction)tapIt; - (void)timerFinished; @property (nonatomic, retain) UIButton *start; @end

  Read the article

• Java thread dump where main thread has no call stack? (jsvc)

  - by dwhsix

  We have a java process running as a daemon (under jsvc). Every several days it just stops doing any work; output to the logfile stops (it is pretty verbose, on 5-minute intervals) and it consumes no CPU or IO. There are no exceptions logged in the logfile nor in syserr or sysout. The last log statement is just prior to a db commit being done, but there is no open connection on the db server (MySQL) and reviewing the code, there should always be additional log output after that, even if it had encountered an exception that was going to bubble up. The most curious thing I find is that in the thread dump (included below), there's no thread in our code at all, and the main thread seems to have no context whatsoever: "main" prio=10 tid=0x0000000000614000 nid=0x445d runnable [0x0000000000000000] java.lang.Thread.State: RUNNABLE As noted earlier, this is a daemon process running using jsvc, but I don't know if that has anything to do with it (I can restructure the code to also allow running it directly, to test). Any suggestions on what might be happening here? Thanks... dwh Full thread dump: Full thread dump Java HotSpot(TM) 64-Bit Server VM (14.2-b01 mixed mode): "MySQL Statement Cancellation Timer" daemon prio=10 tid=0x00002aaaf81b8800 nid=0x447b in Object.wait() [0x00002aaaf6a22000] java.lang.Thread.State: WAITING (on object monitor) at java.lang.Object.wait(Native Method) - waiting on <0x00002aaab5556d50> (a java.util.TaskQueue) at java.lang.Object.wait(Object.java:485) at java.util.TimerThread.mainLoop(Timer.java:483) - locked <0x00002aaab5556d50> (a java.util.TaskQueue) at java.util.TimerThread.run(Timer.java:462) "Low Memory Detector" daemon prio=10 tid=0x00000000006a4000 nid=0x4479 runnable [0x0000000000000000] java.lang.Thread.State: RUNNABLE "CompilerThread1" daemon prio=10 tid=0x00000000006a1000 nid=0x4477 waiting on condition [0x0000000000000000] java.lang.Thread.State: RUNNABLE "CompilerThread0" daemon prio=10 tid=0x000000000069d000 nid=0x4476 waiting on condition [0x0000000000000000] java.lang.Thread.State: RUNNABLE "Signal Dispatcher" daemon prio=10 tid=0x000000000069b000 nid=0x4465 waiting on condition [0x0000000000000000] java.lang.Thread.State: RUNNABLE "Finalizer" daemon prio=10 tid=0x0000000000678800 nid=0x4464 in Object.wait() [0x00002aaaf61d6000] java.lang.Thread.State: WAITING (on object monitor) at java.lang.Object.wait(Native Method) - waiting on <0x00002aaab54a1cb8> (a java.lang.ref.ReferenceQueue$Lock) at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:118) - locked <0x00002aaab54a1cb8> (a java.lang.ref.ReferenceQueue$Lock) at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:134) at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:159) "Reference Handler" daemon prio=10 tid=0x0000000000676800 nid=0x4463 in Object.wait() [0x00002aaaf60d5000] java.lang.Thread.State: WAITING (on object monitor) at java.lang.Object.wait(Native Method) - waiting on <0x00002aaab54a1cf0> (a java.lang.ref.Reference$Lock) at java.lang.Object.wait(Object.java:485) at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:116) - locked <0x00002aaab54a1cf0> (a java.lang.ref.Reference$Lock) "main" prio=10 tid=0x0000000000614000 nid=0x445d runnable [0x0000000000000000] java.lang.Thread.State: RUNNABLE "VM Thread" prio=10 tid=0x0000000000670000 nid=0x4462 runnable "GC task thread#0 (ParallelGC)" prio=10 tid=0x000000000061e000 nid=0x445e runnable "GC task thread#1 (ParallelGC)" prio=10 tid=0x0000000000620000 nid=0x445f runnable "GC task thread#2 (ParallelGC)" prio=10 tid=0x0000000000622000 nid=0x4460 runnable "GC task thread#3 (ParallelGC)" prio=10 tid=0x0000000000623800 nid=0x4461 runnable "VM Periodic Task Thread" prio=10 tid=0x00000000006a6800 nid=0x447a waiting on condition JNI global references: 797 Heap PSYoungGen total 162944K, used 48388K [0x00002aaadff40000, 0x00002aaaf2ab0000, 0x00002aaaf5490000) eden space 102784K, 47% used [0x00002aaadff40000,0x00002aaae2e81170,0x00002aaae63a0000) from space 60160K, 0% used [0x00002aaaeb850000,0x00002aaaeb850000,0x00002aaaef310000) to space 86720K, 0% used [0x00002aaae63a0000,0x00002aaae63a0000,0x00002aaaeb850000) PSOldGen total 699072K, used 699072K [0x00002aaab5490000, 0x00002aaadff40000, 0x00002aaadff40000) object space 699072K, 100% used [0x00002aaab5490000,0x00002aaadff40000,0x00002aaadff40000) PSPermGen total 21248K, used 9252K [0x00002aaab0090000, 0x00002aaab1550000, 0x00002aaab5490000) object space 21248K, 43% used [0x00002aaab0090000,0x00002aaab09993e8,0x00002aaab1550000)

  Read the article

• Multi-Array of XML Requests

  - by sologhost

  OMG, I am in need of a way to set up arrays of XML Requests based on the idShout - 1. So it would be something like this... var req = new Array(); req[idShout - 1] = ALL XML Data... Here's what I got so far but it's not working at all :( var idShout; var req = new Array(); function htmlRequest(url, params, HttpMethod) { req[req.push] = ajax_function(); for (i=0;i<req.length;i++) { if (req[i]) { if (HttpMethod == "GET") { req[i].onreadystatechange = function() { if (req[i].readyState != 4) return; if (req[i].responseText !== null && req[i].status == 200) { document.getElementById("shoutbox_area" + idShout).innerHTML = req[i].responseText; } } } req[i].open(HttpMethod,url,true); if (HttpMethod == "POST") req[i].setRequestHeader("Content-Type", "application/x-www-form-urlencoded"); if (params == "") req[i].send(null); else req[i].send(params); return req[i]; } else return null; } } function ajax_function() { var ajax_request = null; try { // Opera 8.0+, Firefox, Safari ajax_request = new XMLHttpRequest(); } catch (e) { // IE Browsers try { ajax_request = new ActiveXObject("Msxml2.XMLHTTP"); } catch (e) { try { ajax_request = new ActiveXObject("Microsoft.XMLHTTP"); } catch (e) { //No browser support, rare case return null; } } } return ajax_request; } function send() { var send_data = "shoutmessage=" + document.getElementById("shout_message" + idShout).value; var url = smf_prepareScriptUrl(smf_scripturl) + "action=dreamaction;sa=shoutbox;xml;send_shout="+ idShout; htmlRequest(url, send_data, "POST"); document.getElementById("shout_message" + idShout).value = ""; document.getElementById("shout_message" + idShout).focus(); return true; } function startShouts(refreshRate, shoutCount) { clearInterval(Timer[shoutCount-1]); idShout = shoutCount; show_shouts(); Timer[shoutCount - 1] = setInterval("show_shouts()", refreshRate); return; } function show_shouts() { var url = smf_prepareScriptUrl(smf_scripturl) + "action=dreamaction;sa=shoutbox;xml;get_shouts=" + idShout; htmlRequest(url, "", "GET"); } Any help at all on this would be greatly appreciated... Basically, I'm setting the Timer Arrays in a different function before this, and I call startShouts which is supposed to show all of the information, but startShouts gets called more than once, which is why I have idShout set to equal shoutCount. So it will go something like this: shoutCount = 1, shoutCount = 2, shoutCount = 3, everytime it is being called. So I set the req[idShout - 1] array and it should return the result right?? Well, I get no errors in Firefox in the error console with this code above, but it doesn't work... Any ideas anyone?? As it needs to output into more than 1 area... argg. Thanks for any help you can offer here :) Thanks guys :)

  Read the article

• CustomListAdapter Problem in Android? Getting ClassCast Exception? How???

  - by Praveen Chandrasekaran

  i want to improve the list view's performance. this is the code for my getView method in my Adapter? public View getView(int arg0, View text_view_name, ViewGroup parent) { try { if (text_view_name == null) { text_view_name = mInflater.inflate( R.layout.bs_content_list_item1, null); text_view_name.setTag(R.id.text1_detail1, text_view_name .findViewById(R.id.text1_detail1)); text_view_name.setTag(R.id.text3_detail1, text_view_name .findViewById(R.id.text3_detail1)); text_view_name.setTag(R.id.eve_img_detail1, text_view_name .findViewById(R.id.eve_img_detail1)); } text1 = (TextView) text_view_name.getTag(R.id.text1_detail1); // text2 = (TextView) text_view_name.getTag(R.id.text2); text3 = (TextView) text_view_name.getTag(R.id.text3_detail1); img = (ImageView) text_view_name.getTag(R.id.eve_img_detail1); text1.setText(VAL1[arg0]); text3.setText(VAL3[arg0]); if (!mBusy) { img_value = new URL(VAL4[arg0]); mIcon11 = BitmapFactory.decodeStream(img_value.openConnection() .getInputStream()); img.setImageBitmap(mIcon11); text_view_name.setTag(R.id.eve_img_detail1, null); } else { img.setImageResource(R.drawable.icon); text_view_name.setTag(R.id.eve_img_detail1, text_view_name .findViewById(R.id.eve_img_detail1)); } } catch (Exception e) { name = "Exception in MultiLine_bar_details1 getView"; Log.v(TAG, name + e); } return text_view_name; } this is the code for scrollstatechanged method: public void onScrollStateChanged(AbsListView view, int scrollState) { switch (scrollState) { case OnScrollListener.SCROLL_STATE_IDLE: try { MultiLine_bar_details1.mBusy = false; int first = view.getFirstVisiblePosition(); int count = view.getCount(); for (int i = 0; i < count; i++) { ImageView t = (ImageView) view.getChildAt(i);// here getting the ClassCastException if (t.getTag(R.id.eve_img_detail1) != null) { MultiLine_bar_details1.img_value = new URL( MultiLine_bar_details1.VAL4[first + i]); MultiLine_bar_details1.mIcon11 = BitmapFactory .decodeStream(MultiLine_bar_details1.img_value .openConnection().getInputStream()); MultiLine_bar_details1.img.setImageBitmap(MultiLine_bar_details1.mIcon11); t.setTag(R.id.eve_img_detail1, null); } } } catch (Exception e) { Log.v(TAG, "Idle" + e); } // mStatus.setText("Idle"); break; case OnScrollListener.SCROLL_STATE_TOUCH_SCROLL: MultiLine_bar_details1.mBusy = true; break; case OnScrollListener.SCROLL_STATE_FLING: MultiLine_bar_details1.mBusy = true; break; } } getting the Exception in Idle state: 05-03 16:47:15.201: VERBOSE/BS_Bars(258): Idlejava.lang.ClassCastException: android.widget.LinearLayout this is very complicated for me to get the output properly. actually i have the listview with custom adapter. that icons makes the listview scroll very slow.i am getting the images for icons from the image urls. upto this(above code) i can improve the scroll performance of my list view. but the image icons are not proper in the corresponding order. its dynamically changing when i scroll the listview.. i refered the commonsware busy coder guide and this blog. My very Big question is "How can we access the single view in scrollstatechanged parameter AbsListView? " what is the problem in it? how to do it better? Any Idea?

  Read the article

• Multiple data series in real time plot

  - by Gr3n

  Hi, I'm kind of new to Python and trying to create a plotting app for values read via RS232 from a sensor. I've managed (after some reading and copying examples online) to get a plot working that updates on a timer which is great. My only trouble is that I can't manage to get multiple data series into the same plot. Does anyone have a solution to this? This is the code that I've worked out this far: import os import pprint import random import sys import wx # The recommended way to use wx with mpl is with the WXAgg backend import matplotlib matplotlib.use('WXAgg') from matplotlib.figure import Figure from matplotlib.backends.backend_wxagg import FigureCanvasWxAgg as FigCanvas, NavigationToolbar2WxAgg as NavigationToolbar import numpy as np import pylab DATA_LENGTH = 100 REDRAW_TIMER_MS = 20 def getData(): return int(random.uniform(1000, 1020)) class GraphFrame(wx.Frame): # the main frame of the application def __init__(self): wx.Frame.__init__(self, None, -1, "Usart plotter", size=(800,600)) self.Centre() self.data = [] self.paused = False self.create_menu() self.create_status_bar() self.create_main_panel() self.redraw_timer = wx.Timer(self) self.Bind(wx.EVT_TIMER, self.on_redraw_timer, self.redraw_timer) self.redraw_timer.Start(REDRAW_TIMER_MS) def create_menu(self): self.menubar = wx.MenuBar() menu_file = wx.Menu() m_expt = menu_file.Append(-1, "&Save plot\tCtrl-S", "Save plot to file") self.Bind(wx.EVT_MENU, self.on_save_plot, m_expt) menu_file.AppendSeparator() m_exit = menu_file.Append(-1, "E&xit\tCtrl-X", "Exit") self.Bind(wx.EVT_MENU, self.on_exit, m_exit) self.menubar.Append(menu_file, "&File") self.SetMenuBar(self.menubar) def create_main_panel(self): self.panel = wx.Panel(self) self.init_plot() self.canvas = FigCanvas(self.panel, -1, self.fig) # pause button self.pause_button = wx.Button(self.panel, -1, "Pause") self.Bind(wx.EVT_BUTTON, self.on_pause_button, self.pause_button) self.Bind(wx.EVT_UPDATE_UI, self.on_update_pause_button, self.pause_button) self.hbox1 = wx.BoxSizer(wx.HORIZONTAL) self.hbox1.Add(self.pause_button, border=5, flag=wx.ALL | wx.ALIGN_CENTER_VERTICAL) self.vbox = wx.BoxSizer(wx.VERTICAL) self.vbox.Add(self.canvas, 1, flag=wx.LEFT | wx.TOP | wx.GROW) self.vbox.Add(self.hbox1, 0, flag=wx.ALIGN_LEFT | wx.TOP) self.panel.SetSizer(self.vbox) #self.vbox.Fit(self) def create_status_bar(self): self.statusbar = self.CreateStatusBar() def init_plot(self): self.dpi = 100 self.fig = Figure((3.0, 3.0), dpi=self.dpi) self.axes = self.fig.add_subplot(111) self.axes.set_axis_bgcolor('white') self.axes.set_title('Usart data', size=12) pylab.setp(self.axes.get_xticklabels(), fontsize=8) pylab.setp(self.axes.get_yticklabels(), fontsize=8) # plot the data as a line series, and save the reference # to the plotted line series # self.plot_data = self.axes.plot( self.data, linewidth=1, color="blue", )[0] def draw_plot(self): # redraws the plot xmax = len(self.data) if len(self.data) > DATA_LENGTH else DATA_LENGTH xmin = xmax - DATA_LENGTH ymin = 0 ymax = 4096 self.axes.set_xbound(lower=xmin, upper=xmax) self.axes.set_ybound(lower=ymin, upper=ymax) # enable grid #self.axes.grid(True, color='gray') # Using setp here is convenient, because get_xticklabels # returns a list over which one needs to explicitly # iterate, and setp already handles this. # pylab.setp(self.axes.get_xticklabels(), visible=True) self.plot_data.set_xdata(np.arange(len(self.data))) self.plot_data.set_ydata(np.array(self.data)) self.canvas.draw() def on_pause_button(self, event): self.paused = not self.paused def on_update_pause_button(self, event): label = "Resume" if self.paused else "Pause" self.pause_button.SetLabel(label) def on_save_plot(self, event): file_choices = "PNG (*.png)|*.png" dlg = wx.FileDialog( self, message="Save plot as...", defaultDir=os.getcwd(), defaultFile="plot.png", wildcard=file_choices, style=wx.SAVE) if dlg.ShowModal() == wx.ID_OK: path = dlg.GetPath() self.canvas.print_figure(path, dpi=self.dpi) self.flash_status_message("Saved to %s" % path) def on_redraw_timer(self, event): if not self.paused: newData = getData() self.data.append(newData) self.draw_plot() def on_exit(self, event): self.Destroy() def flash_status_message(self, msg, flash_len_ms=1500): self.statusbar.SetStatusText(msg) self.timeroff = wx.Timer(self) self.Bind( wx.EVT_TIMER, self.on_flash_status_off, self.timeroff) self.timeroff.Start(flash_len_ms, oneShot=True) def on_flash_status_off(self, event): self.statusbar.SetStatusText('') if __name__ == '__main__': app = wx.PySimpleApp() app.frame = GraphFrame() app.frame.Show() app.MainLoop()

  Read the article

• How to make a character jump, both on objects and just normal jump.

  - by haxerflaxer

  Hi, I'm kind of a beginner when it comes to java programming, and I have a project in school where I'm going to create a game much like Icy Tower. And my question is, how am I going to write to make the character stand on the ground and be able to jump up on objects? Here's my code so far: Part one package Sprites; import java.awt.Image; import java.awt.event.KeyEvent; import javax.swing.ImageIcon; public class jumper { private String jump = "oka.png"; private int dx; private int dy; private int x; private int y; private Image image; public jumper() { ImageIcon ii = new ImageIcon(this.getClass().getResource(jump)); image = ii.getImage(); x = 50; y = 100; } public void move() { x += dx; y += dy; } public int getX() { return x; } public int getY() { return y; } public Image getImage() { return image; } public void keyPressed(KeyEvent e) { int key = e.getKeyCode(); if (key == KeyEvent.VK_LEFT) { dx = -5; ImageIcon ii = new ImageIcon(this.getClass().getResource("oki.png")); image = ii.getImage(); } if (key == KeyEvent.VK_RIGHT){ dx = 5; ImageIcon ii = new ImageIcon(this.getClass().getResource("oka.png")); image = ii.getImage(); } if (key == KeyEvent.VK_SPACE) { dy = -5; } if (key == KeyEvent.VK_DOWN) { dy = 5; } } public void keyReleased(KeyEvent e) { int key = e.getKeyCode(); if (key == KeyEvent.VK_LEFT) { dx = 0; } if (key == KeyEvent.VK_RIGHT){ dx = 0; } if (key == KeyEvent.VK_SPACE) { dy = 0; } if (key == KeyEvent.VK_DOWN) { dy = 0; } } } Part two package Sprites; import java.awt.Color; import java.awt.Graphics; import java.awt.Graphics2D; import java.awt.Toolkit; import java.awt.event.ActionEvent; import java.awt.event.ActionListener; import java.awt.event.KeyAdapter; import java.awt.event.KeyEvent; import javax.swing.JPanel; import javax.swing.Timer; public class board extends JPanel implements ActionListener { private Timer klocka; private jumper jumper; public board() { addKeyListener(new TAdapter()); setFocusable(true); setBackground(Color.WHITE); setDoubleBuffered(true); jumper = new jumper(); klocka = new Timer(5, this); klocka.start(); } public void paint(Graphics g) { super.paint(g); Graphics2D g2d = (Graphics2D)g; g2d.drawImage(jumper.getImage(), jumper.getX(), jumper.getY(), this); Toolkit.getDefaultToolkit().sync(); g.dispose(); } public void actionPerformed(ActionEvent e) { jumper.move(); repaint(); } private class TAdapter extends KeyAdapter { public void keyReleased(KeyEvent e) { jumper.keyReleased(e); } public void keyPressed(KeyEvent e) { jumper.keyPressed(e); } } } Part three package Sprites; import javax.swing.JFrame; public class RType extends JFrame { public RType() { add(new board()); setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); setSize(800, 600); setLocationRelativeTo(null); setTitle("R - type"); setResizable(false); setVisible(true); } public static void main(String[] args) { new RType(); } } I really appreciate all the help I can get!

  Read the article

• How do you make a character jump, both on objects and just normal jump?

  - by haxerflaxer

  Hi, I'm kind of a beginner when it comes to java programming, and I have a project in school where I'm going to create a game much like Icy Tower. And my question is, how am I going to write to make the character stand on the ground and be able to jump up on objects? Here's my code so far: Part one package Sprites; import java.awt.Image; import java.awt.event.KeyEvent; import javax.swing.ImageIcon; public class jumper { private String jump = "oka.png"; private int dx; private int dy; private int x; private int y; private Image image; public jumper() { ImageIcon ii = new ImageIcon(this.getClass().getResource(jump)); image = ii.getImage(); x = 50; y = 100; } public void move() { x += dx; y += dy; } public int getX() { return x; } public int getY() { return y; } public Image getImage() { return image; } public void keyPressed(KeyEvent e) { int key = e.getKeyCode(); if (key == KeyEvent.VK_LEFT) { dx = -5; ImageIcon ii = new ImageIcon(this.getClass().getResource("oki.png")); image = ii.getImage(); } if (key == KeyEvent.VK_RIGHT){ dx = 5; ImageIcon ii = new ImageIcon(this.getClass().getResource("oka.png")); image = ii.getImage(); } if (key == KeyEvent.VK_SPACE) { dy = -5; } if (key == KeyEvent.VK_DOWN) { dy = 5; } } public void keyReleased(KeyEvent e) { int key = e.getKeyCode(); if (key == KeyEvent.VK_LEFT) { dx = 0; } if (key == KeyEvent.VK_RIGHT){ dx = 0; } if (key == KeyEvent.VK_SPACE) { dy = 0; } if (key == KeyEvent.VK_DOWN) { dy = 0; } } } Part two package Sprites; import java.awt.Color; import java.awt.Graphics; import java.awt.Graphics2D; import java.awt.Toolkit; import java.awt.event.ActionEvent; import java.awt.event.ActionListener; import java.awt.event.KeyAdapter; import java.awt.event.KeyEvent; import javax.swing.JPanel; import javax.swing.Timer; public class board extends JPanel implements ActionListener { private Timer klocka; private jumper jumper; public board() { addKeyListener(new TAdapter()); setFocusable(true); setBackground(Color.WHITE); setDoubleBuffered(true); jumper = new jumper(); klocka = new Timer(5, this); klocka.start(); } public void paint(Graphics g) { super.paint(g); Graphics2D g2d = (Graphics2D)g; g2d.drawImage(jumper.getImage(), jumper.getX(), jumper.getY(), this); Toolkit.getDefaultToolkit().sync(); g.dispose(); } public void actionPerformed(ActionEvent e) { jumper.move(); repaint(); } private class TAdapter extends KeyAdapter { public void keyReleased(KeyEvent e) { jumper.keyReleased(e); } public void keyPressed(KeyEvent e) { jumper.keyPressed(e); } } } Part three package Sprites; import javax.swing.JFrame; public class RType extends JFrame { public RType() { add(new board()); setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); setSize(800, 600); setLocationRelativeTo(null); setTitle("R - type"); setResizable(false); setVisible(true); } public static void main(String[] args) { new RType(); } } I really appreciate all the help I can get!

  Read the article

• No audio with headphones, but audio works with integrated speakers

  - by Pedro

  My speakers work correctly, but when I plug in my headphones, they don't work. I am running Ubuntu 10.04. My audio card is Realtek ALC259 My laptop model is a HP G62t a10em In another thread someone fixed a similar issue (headphones work, speakers not) folowing this: sudo vi /etc/modprobe.d/alsa-base.conf (or some other editor instead of Vi) Append the following at the end of the file: alias snd-card-0 snd-hda-intel options snd-hda-intel model=auto Reboot but it doesnt work for me. Before making and changes to alsa, this was the output: alsamixer gives me this: Things I did: followed this HowTo but now no hardware seems to be present (before, there were 2 items listed): Now, alsamixer gives me this: alsamixer: relocation error: alsamixer: symbol snd_mixer_get_hctl, version ALSA_0.9 not defined in file libasound.so.2 with link time reference I guess there was and error in the alsa-driver install so I began reinstalling it. cd alsa-driver* //this works fine// sudo ./configure --with-cards=hda-intel --with-kernel=/usr/src/linux-headers-$(uname -r) //this works fine// sudo make //this doesn't work. see ouput error below// sudo make install Final lines of sudo make: hpetimer.c: In function ‘snd_hpet_open’: hpetimer.c:41: warning: implicit declaration of function ‘hpet_register’ hpetimer.c:44: warning: implicit declaration of function ‘hpet_control’ hpetimer.c:44: error: expected expression before ‘unsigned’ hpetimer.c: In function ‘snd_hpet_close’: hpetimer.c:51: warning: implicit declaration of function ‘hpet_unregister’ hpetimer.c:52: error: invalid use of undefined type ‘struct hpet_task’ hpetimer.c: In function ‘hpetimer_init’: hpetimer.c:88: error: ‘EINVAL’ undeclared (first use in this function) hpetimer.c:99: error: invalid use of undefined type ‘struct hpet_task’ hpetimer.c:100: error: invalid use of undefined type ‘struct hpet_task’ hpetimer.c: At top level: hpetimer.c:121: warning: excess elements in struct initializer hpetimer.c:121: warning: (near initialization for ‘__param_frequency’) hpetimer.c:121: warning: excess elements in struct initializer hpetimer.c:121: warning: (near initialization for ‘__param_frequency’) hpetimer.c:121: warning: excess elements in struct initializer hpetimer.c:121: warning: (near initialization for ‘__param_frequency’) hpetimer.c:121: warning: excess elements in struct initializer hpetimer.c:121: warning: (near initialization for ‘__param_frequency’) hpetimer.c:121: error: extra brace group at end of initializer hpetimer.c:121: error: (near initialization for ‘__param_frequency’) hpetimer.c:121: warning: excess elements in struct initializer hpetimer.c:121: warning: (near initialization for ‘__param_frequency’) make[1]: *** [hpetimer.o] Error 1 make[1]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.9/acore' make: *** [compile] Error 1 And then sudo make install gives me: rm -f /lib/modules/0.0.0/misc/snd*.*o /lib/modules/0.0.0/misc/persist.o /lib/modules/0.0.0/misc/isapnp.o make[1]: Entering directory `/usr/src/alsa/alsa-driver-1.0.9/acore' mkdir -p /lib/modules/0.0.0/misc cp snd-hpet.o snd-page-alloc.o snd-pcm.o snd-timer.o snd.o /lib/modules/0.0.0/misc cp: cannot stat `snd-hpet.o': No such file or directory cp: cannot stat `snd-page-alloc.o': No such file or directory cp: cannot stat `snd-pcm.o': No such file or directory cp: cannot stat `snd-timer.o': No such file or directory cp: cannot stat `snd.o': No such file or directory make[1]: *** [_modinst__] Error 1 make[1]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.9/acore' make: *** [install-modules] Error 1 [SOLUTION] After screwing it all up, someone mentioned why not trying using the packages in Synaptic - so I did. I have reinstalled the following packages and rebooter: -alsa-hda-realtek-ignore-sku-dkms -alsa-modules-2.6.32-25-generic -alsa-source -alsa-utils -linux-backports-modules-alsa-lucid-generic -linux-backports-modules-alsa-lucid-generic-pae -linux-sound-base -(i think i listed them all) After rebooting, the audio worked, both in speakers and headphones. I have no idea which is the package that made my audio work, but it certainly was one of them. [/SOLUTION]

  Read the article

• Jersey non blocking client

  - by Pavel Bucek

  Although Jersey already have support for making asynchronous requests, it is implemented by standard blocking way - every asynchronous request is handled by one thread and that thread is released only after request is completely processed. That is OK for lots of cases, but imagine how that will work when you need to do lots of parallel requests. Of course you can limit (and its really wise thing to do, you do want control your resources) number of threads used for asynchronous requests, but you'll get another maybe not pleasant consequence - obviously processing time will incerase. There are few projects which are trying to deal with that problem, commonly named as async http clients. I didn't want to "re-implement a wheel" and I decided I'll use AHC - Async Http Client made by Jeanfrancois Arcand. There is also interesting implementation from Apache - HttpAsyncClient, but it is still in "very early stages of development" and others haven't been in similar or better shape as AHC. How this works? Non-blocking clients allow users to make same asynchronous requests as we can do with standard approach but implementation is different - threads are better utilized, they don't spend most of time in idle state. Simply described - when you make a request (send it over the network), you are waiting for reply from other side. And there comes main advantage of non-blocking approach - it uses these threads for further work, like making other requests or processing responses etc.. Idle time is minimized and your resources (threads) will be far better used. Who should consider using this? Everyone who is making lots of asynchronous requests. I haven't done proper benchmark yet, but some simple dumb tests are showing huge improvement in cases where lots of concurrent asynchronous requests are made in short period. Last but not least - this module is still experimental, so if you don't like something or if you have ideas for improvements/any feedback, feel free to comment this blog post, send mail to [email protected] or contact me personally. All feedback is greatly appreciated! maven dependency (will be present in java.net maven 2 repo by the end of the day): link: http://download.java.net/maven/2/com/sun/jersey/experimental/jersey-non-blocking-client <dependency> <groupId>com.sun.jersey.experimental</groupId> <artifactId>jersey-non-blocking-client</artifactId> <version>1.9-SNAPSHOT</version> </dependency> code snippet: ClientConfig cc = new DefaultNonBlockingClientConfig(); cc.getProperties().put(NonBlockingClientConfig.PROPERTY_THREADPOOL_SIZE, 10); // default value, feel free to change Client c = NonBlockingClient.create(cc); AsyncWebResource awr = c.asyncResource("http://oracle.com"); Future<ClientResponse> responseFuture = awr.get(ClientResponse.class); // or awr.get(new TypeListener<ClientResponse>(ClientResponse.class) { @Override public void onComplete(Future<ClientResponse> f) throws InterruptedException { ... } }); javadoc (temporary location, won't be updated): http://anise.cz/~paja/jersey-non-blocking-client/

  Read the article

• 5.1 surround sound on Acer Aspire 5738ZG with Ubuntu 11.10

  - by kbargais_LV

  I got a problem with sound. I tried everything but no results. :( I got 3 sound ports. my daemon: # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify # it under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, write to the Free Software # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 # USA. ## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for ## more information. Default values are commented out. Use either ; or # for ## commenting. ; daemonize = no ; fail = yes ; allow-module-loading = yes ; allow-exit = yes ; use-pid-file = yes ; system-instance = no ; local-server-type = user ; enable-shm = yes ; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB ; lock-memory = no ; cpu-limit = no ; high-priority = yes ; nice-level = -11 ; realtime-scheduling = yes ; realtime-priority = 5 ; exit-idle-time = 20 ; scache-idle-time = 20 ; dl-search-path = (depends on architecture) ; load-default-script-file = yes ; default-script-file = /etc/pulse/default.pa ; log-target = auto ; log-level = notice ; log-meta = no ; log-time = no ; log-backtrace = 0 resample-method = speex-float-1 ; enable-remixing = yes ; enable-lfe-remixing = no flat-volumes = no ; rlimit-fsize = -1 ; rlimit-data = -1 ; rlimit-stack = -1 ; rlimit-core = -1 ; rlimit-as = -1 ; rlimit-rss = -1 ; rlimit-nproc = -1 ; rlimit-nofile = 256 ; rlimit-memlock = -1 ; rlimit-locks = -1 ; rlimit-sigpending = -1 ; rlimit-msgqueue = -1 ; rlimit-nice = 31 ; rlimit-rtprio = 9 ; rlimit-rttime = 1000000 ; default-sample-format = s16le ; default-sample-rate = 44100 ; default-sample-channels = 6 ; default-channel-map = front-left,front-right default-fragments = 8 default-fragment-size-msec = 10 ; enable-deferred-volume = yes ; deferred-volume-safety-margin-usec = 8000 ; deferred-volume-extra-delay-usec = 0

  Read the article

• AccelerometerInput XNA GameComponent

  - by Michael B. McLaughlin

  Bad accelerometer controls kill otherwise good games. I decided to try to do something about it. So I create an XNA GameComponent called AccelerometerInput. It’s still a beta project but you are welcome to try it, use it, modify it, etc. I’m releasing under the terms of the Microsoft Public License. Important info: First, it only supports tilt-style controls currently. I have not implemented motion-style controls yet (and make no promises as to when I might find time to do so). Second, I commented it heavily so that you can (hopefully) understand what it is doing. Please read the comments and examine the sample game for a usage overview. There are configurable parameters which I encourage you to make use of (both by modifying the default values where your testing shows it to be appropriate and also by implementing a calibration mechanism in your game that lets the user adjust those configurable values based on his or her own circumstances). Third, even with this code, accelerometer controls are still a fairly advanced topic area; you will likely find nothing but disappointment if you simply plunk this into some project without testing it on a device (or preferably on several devices). Fourth, if you do try this code and find that something doesn’t work as expected on your phone, please let me know as I want to improve it and can only do so with your help. Let me know what phone model it is, what you tried doing, what you expected, and what result you had instead. I may or may not be able to incorporate it into the code, but I can let others know at the very least so that they can make appropriate modifications to their games (I’m hopeful that all phones are reasonably similar in their workings and require, at most, a slight calibration change, but I simply don’t know). Fifth, although I’ll do my best to answer any questions you may have about it, I’m very busy with a number of things currently so it might take a little while. Please look through the code and examine the comments and sample game first before asking any questions. It’s likely that the answer is in there. If not, or if you just aren’t really sure, ask away. Sixth, there are differences between a portrait-mode game and a landscape mode game (specifically in the appropriate default tilt adjustment for toward the user/away from the user calculations). This is documented and the default is set for landscape. If you use this for a portrait game, make the appropriate change (look for the TODO: comment in AccelerometerInput.cs). Seventh, no provision whatsoever is made for disabling screen locking. It is up to you to implement that and to take appropriate measures to detect when the user has been idle for too long and timeout the game. That code is very game-specific. If you have questions about such matters, consult the relevant MSDN documentation and, if you still have questions, visit the App Hub forums and ask there. I answer questions there a lot and so I may even stumble across your question and answer it. But that’s a much better forum than the comments section here for questions of that sort so I would appreciate it if you asked idle detection-related questions there (or on some other suitable site that you may be more familiar and comfortable with). Eighth, this is an XNA GameComponent intended for XNA-based games on WP7. A sufficiently knowledgeable Silverlight developer should have no problem adapting it for use in a Silverlight game or app. I may create a Silverlight version at some point myself. Right now I do not have the time, unfortunately. Ok. Without further ado: http://www.bobtacoindustries.com/developers/utils/AccelerometerInput.zip Have a great St. Patrick’s Day!

  Read the article

• How do I get 5.1 surround sound working on an Acer Aspire 5738ZG?

  - by kbargais_LV

  I got a problem with sound. I tried everything but no results. :( I got 3 sound ports. my daemon: # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify # it under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, write to the Free Software # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 # USA. ## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for ## more information. Default values are commented out. Use either ; or # for ## commenting. ; daemonize = no ; fail = yes ; allow-module-loading = yes ; allow-exit = yes ; use-pid-file = yes ; system-instance = no ; local-server-type = user ; enable-shm = yes ; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB ; lock-memory = no ; cpu-limit = no ; high-priority = yes ; nice-level = -11 ; realtime-scheduling = yes ; realtime-priority = 5 ; exit-idle-time = 20 ; scache-idle-time = 20 ; dl-search-path = (depends on architecture) ; load-default-script-file = yes ; default-script-file = /etc/pulse/default.pa ; log-target = auto ; log-level = notice ; log-meta = no ; log-time = no ; log-backtrace = 0 resample-method = speex-float-1 ; enable-remixing = yes ; enable-lfe-remixing = no flat-volumes = no ; rlimit-fsize = -1 ; rlimit-data = -1 ; rlimit-stack = -1 ; rlimit-core = -1 ; rlimit-as = -1 ; rlimit-rss = -1 ; rlimit-nproc = -1 ; rlimit-nofile = 256 ; rlimit-memlock = -1 ; rlimit-locks = -1 ; rlimit-sigpending = -1 ; rlimit-msgqueue = -1 ; rlimit-nice = 31 ; rlimit-rtprio = 9 ; rlimit-rttime = 1000000 ; default-sample-format = s16le ; default-sample-rate = 44100 ; default-sample-channels = 6 ; default-channel-map = front-left,front-right default-fragments = 8 default-fragment-size-msec = 10 ; enable-deferred-volume = yes ; deferred-volume-safety-margin-usec = 8000 ; deferred-volume-extra-delay-usec = 0

  Read the article

• Jquery mobile and Google maps [on hold]

  - by Jack

  I have been trying to get my google maps to display within a page of a mobile app. The map will display for a second, and then disappear. I have read about a jquery bug, but i can't seem to find a way to get this code to work. any help would be greatly appreciated. <script> var geocoder; var currentLocation; var searchResults; var map; var directionsDisplay; var directionsService; function init(){ geocoder = new google.maps.Geocoder(); if (navigator.geolocation){ navigator.geolocation.watchPosition(showLocation, locationError); } else { alert("Geolocation not supported on this device"); return; } }//init function function showLocation(location){//start showlocation currentLocation = new google.maps.LatLng(location.coords.latitude, location.coords.longitude); $('#lat').attr("value", currentLocation.lat()); $('#lng').attr("value", currentLocation.lng()); geocoder = new google.maps.Geocoder(); geocoder.geocode({'latLng': currentLocation}, function(results, status){ if (status == google.maps.GeocoderStatus.OK){ if (results[0]){ var address = results[0].formatted_address; $('#loc').html(results[0].formatted_address); var info = "Latitude: " + location.coords.latitude + " Longitude: " + location.coords.longitude + "<br />"; info += "Location accurate within " + location.coords.accuracy + " meters <br /> Last Update: " + new Date(location.timestamp).toLocaleString(); $('#acc').html(info); $('#address').attr("value", results[0].formatted_address); }else{ alert('No results found'); }//end else //if(!map) initMap(); }else { $('#loc').html('Geocoder failed due to: ' + status); }//end else });//end of function if (!map) initMap(); }//end showlocation function function locationError(error){ switch(error.code) { case error.PERMISSION_DENIED: alert("Geolocation access denied or disabled. To enable geolocation on your iPhone, go to Settings > General> Location Services"); break; case error.POSITION_UNAVAILABLE: alert("Current location not available"); break; case error.TIMEOUT: alert("Timeout"); break; default: alert("unkown error"); break; }//endswitch }//endlocationerror function initMap(){ var mapOptions = { zoom: 14, mapTypeId: google.maps.MapTypeId.ROADMAP, center: currentLocation };//var mapOptions map = new google.maps.Map(document.getElementById('mapDiv'), mapOptions); google.maps.event.trigger(map, 'resize'); var bounds = new google.maps.LatLngBounds(); bounds.extend(currentLocation); map.fitBounds(bounds); //new code //var center; //function calculateCenter(){ //center = map.getCenter(); //} //google.maps.even.addDomListener(map, 'idle', function(){ //calculateCenter(); //}); //google.maps.even.addListenerOnce(map, 'idle', function(){ //google.maps.even.trigger(map,'resize'); //}); //google.maps.event.addDomListener(window, 'resize', function() { //map.setCenter(center); //});//end new code }//end initMap() //------------------------------------------------------------------------------- $(document).on("pageinit", init);

  Read the article

• 12.10 unable to install or even run from Live CD with nVidia GTX 580

  - by user99056

  I've used Ubuntu in the past (set up as web server, etc over in Iraq), so I'm not a 100% Linux Noob, however, I'm running into a brick wall here. I've got a machine I built when I got back to the US earlier this year, running Windows 7 Ultimate on it, and I've now got some free time and would like to transition over to Ubuntu full time. I've searched around in the forums, and there seems to be an issue with the nVidia graphics cards, so I've tried going to the EVGA site to see if I could find a new BIOS update for it and had no luck, so I'm back searching the forums here again and decided to just go ahead and post my question. My apologies if this is covered in another post and I was just unable to find it. I've found a few 'similar' posts, but nothing as bad as my issue. With the history aside, here is the actual detailed issue: I purchased a new SSD (Intel 520 SSD), arrived today, and I disconnect my old Windows 7 SSD. I had pre downloaded the ubuntu-12.10-desktop-amd64 earlier today and burned it to DVD. Upon inserting the Live CD into the computer and booting up, everything was fine up to the 'Run From Live CD' or 'Install Ubuntu Now' buttons. As I was sure I wanted to go ahead and make the switch, I selected the 'Install Now' from the right hand side. CD Spins up, black window pops up, and then the errors started: date/time GPU Lockup date/time Failed to idle channel 1 date/time PFIFO - playlist update failed date/time Failed to idle channel 2 date/time PFIFO - playlist update failed Thinking it might correct itself, I let it run and it would swap over to a GUI Screen that was locked up with major blurring/etc, then back to the command line with the errors. Eventually it said something along the lines of 'unknown status' and switched back to the GUI and froze. So, that's when I tried to see if I could find a BIOS upgrade for the nVidia GTX580 cards, and had no luck. So I thought, why not try to just run it from the Live CD and see if I can at least get a look at it, maybe if I could get it running try to do some sort of install from there and fix the driver issue. I rebooted, brought up the Live CD, and this time chose the left option / run from the CD. It brought me all the way in to the desktop, I saw my drives, the other icons, could move the mouse, etc for about 30 seconds and then it locked up completely. I've tried this a couple of times and get the same results every time. Hardware: Intel i7-3930K CPU @ 3.2GHz (12 CPUs) / MSI MS-7760 Motherboard / 32GB RAM / 2 x EVGA (nVidia) GeForce GTX 580 (4GB Ram each) So the question is: Is there any way to install 12.10 if you can't even get the Live CD to run (for more than 30 seconds)? My current hardware configuration is both of the GTX 580 cards have an SLI jumper on them, and I have 2 monitors on each card. (Ubuntu info obviously only shows on the main monitor from the failed installation and the attempt at running the Live CD). Perhaps opening the machine back up and removing the SLI Jumper and removing the other 3 monitors (so it only would have 1 video card with one monitor on it) would actually allow me to get 12.10 installed, then I could work on an nVidia Video Driver fix for the GTX 580, and then possibly hook up the other video card and monitors? Or is this something that they are currently aware of and may update with a future release in the next few days/weeks? Any thoughts or suggestions would be greatly appreciated, as I can't even try to fix the issue (assuming it is the nVidia drivers) if I can't even get it to install at all.

  Read the article

• SmartGWT - Update ListGridRecord dynamically

  - by Haylwood

  I am using SmartGWT and I have a ListGrid populated with an array of ListGridRecords using the setData() call. I am trying to update a progress property of a single record (on a timer for testing) and have it update in the browser. I have tried various combinations of draw(), redraw(), markForRedraw() etc. to no avail. I also tried overriding the updateRecordComponent() method in my table class, but it only gets called when the records are first created (after createRecordComponent()). I should note that I do NOT want to accomplish this by binding to a DataSource. I just want to be able to update the attribute on the client-side. ArrayList<SegmentSortRecord> mRecords; mRecords.add(new SegmentSortRecord("03312010_M001_S004")); mRecords.add(new SegmentSortRecord("03312010_M001_S005")); mRecords.add(new SegmentSortRecord("03312010_M001_S006")); mRecords.add(new SegmentSortRecord("03312010_M001_S007")); SegmentSortRecord[] records = new SegmentSortRecord[mRecords.size()]; mRecords.toArray(records); mSortProgressTable.setData(records); . . . mTestTimer = new Timer() { public void run() { mTestPercent += 5; if (mTestPercent <= 100) { mSortProgressTable.getRecord(2).setAttribute(Constants.PROGRESS_COL_NAME, mTestPercent); //mSortProgressTable.markForRedraw(); //mSortProgressTable.redraw(); } else { mTestPercent = 0; } } }; ... @Override protected Canvas createRecordComponent(final ListGridRecord aRecord, Integer aColumn) { String fieldName = getFieldName(aColumn); // Want to override the behavior for rendering the "progress" field if (fieldName.equals(Constants.PROGRESS_COL_NAME)) { Progressbar bar = new Progressbar(); bar.setBreadth(10); bar.setLength(100); // The JavaScript record object contains attributes that we can // access via 'getAttribute' functions. bar.setPercentDone(aRecord.getAttributeAsInt(Constants.PROGRESS_COL_NAME)); return bar; } Thanks in advance for any help.

  Read the article

• WCF Reliable Session Timeout

  - by RemotecUk

  Hi, when do reliable sessions time out? My session class is defined as follows: [ServiceBehavior(InstanceContextMode = InstanceContextMode.PerSession, ConcurrencyMode = ConcurrencyMode.Multiple)] and in my app.config... <bindings> <netTcpBinding> <binding name="FTS_netTcpBinding"> <reliableSession enabled="true" inactivityTimeout="00:00:30"/> </binding> </netTcpBinding> </bindings> I have put a timer in the constructor of my session class that simply outputs a count (1..2..3...) to the console for every second the session is active. I have tested it so far by faulting my channel. I would have imagined that the session class would have died after ~30 seconds (as specified in my inactivityTimeout parameter) and hence the timer would have died. However it was still going after a minute. Each session on my app will have significant resources so I need to make sure that they are cleaned up when something goes wrong. Thanks.

  Read the article

• Frame Buster Buster ... buster code needed

  - by Jeff Atwood

  Let's say you don't want other sites to "frame" your site in an <iframe>: <iframe src="http://yourwebsite.com"></iframe> So you insert anti-framing, frame busting JavaScript into all your pages: /* break us out of any containing iframes */ if (top != self) { top.location.replace(self.location.href); } Excellent! Now you "bust" or break out of any containing iframe automatically. Except for one small problem. As it turns out, your frame-busting code can be busted, as shown here: <script type="text/javascript"> var prevent_bust = 0 window.onbeforeunload = function() { prevent_bust++ } setInterval(function() { if (prevent_bust > 0) { prevent_bust -= 2 window.top.location = 'http://server-which-responds-with-204.com' } }, 1) </script> This code does the following: increments a counter every time the browser attempts to navigate away from the current page, via the window.onbeforeonload event handler sets up a timer that fires every millisecond via setInterval(), and if it sees the counter incremented, changes the current location to a server of the attacker's control that server serves up a page with HTTP status code 204, which does not cause the browser to nagivate anywhere My question is -- and this is more of a JavaScript puzzle than an actual problem -- how can you defeat the frame-busting buster? I had a few thoughts, but nothing worked in my testing: attempting to clear the onbeforeunload event via onbeforeonload = null had no effect adding an alert() stopped the process let the user know it was happening, but did not interfere with the code in any way; clicking OK lets the busting continue as normal I can't think of any way to clear the setInterval() timer I'm not much of a JavaScript programmer, so here's my challenge to you: hey buster, can you bust the frame-busting buster?

  Read the article

• javascript new Date(0) class shows 16 hours?

  - by Jonah

  interval = new Date(0); return interval.getHours(); The above returns 16. I expect it to return 0. Any pointers? getMinutes() and getSeconds() return zero as expected. Thanks! I am trying to make a timer: function Timer(onUpdate) { this.initialTime = 0; this.timeStart = null; this.onUpdate = onUpdate this.getTotalTime = function() { timeEnd = new Date(); diff = timeEnd.getTime() - this.timeStart.getTime(); return diff + this.initialTime; }; this.formatTime = function() { interval = new Date(this.getTotalTime()); return this.zeroPad(interval.getHours(), 2) + ":" + this.zeroPad(interval.getMinutes(),2) + ":" + this.zeroPad(interval.getSeconds(),2); }; this.start = function() { this.timeStart = new Date(); this.onUpdate(this.formatTime()); var timerInstance = this; setTimeout(function() { timerInstance.updateTime(); }, 1000); }; this.updateTime = function() { this.onUpdate(this.formatTime()); var timerInstance = this; setTimeout(function() { timerInstance.updateTime(); }, 1000); }; this.zeroPad = function(num,count) { var numZeropad = num + ''; while(numZeropad.length < count) { numZeropad = "0" + numZeropad; } return numZeropad; } } It all works fine except for the 16 hour difference. Any ideas?

  Read the article

• why AVAudioplayer doesn't stop/pause when viewWillDisappear?

  - by Rahul Vyas

  I am using avaudioplayer in my app. on viewwilldisappear i want to pause/stop the sound and on viewwill appear i want to play sound again.how do i do this? i'm using this code on viewWillAppear:- if(self.TickPlayer) { [self.TickPlayer play]; } if(self.TickPlayer.volume<0) { self.TickPlayer.volume=1.0; } and this on viewWillDisAppear if(self.TickPlayer) { [self.TickPlayer stop]; } here is the method which plays the sound -(void)PlayTickTickSound:(NSString*)SoundFileName { //Get the filename of the sound file: NSString *path = [NSString stringWithFormat:@"%@%@",[[NSBundle mainBundle] resourcePath],[NSString stringWithFormat:@"/%@",SoundFileName]]; //Get a URL for the sound file NSURL *filePath = [NSURL fileURLWithPath:path isDirectory:NO]; NSError *error; if(self.TickPlayer==nil) { self.TickPlayer = [[AVAudioPlayer alloc] initWithContentsOfURL:filePath error:&error]; // handle errors here. self.TickPlayer.delegate=self; [self.TickPlayer setNumberOfLoops:-1]; // repeat forever [self.TickPlayer play]; } if(self.TickPlayer) { [self.TickPlayer play]; } } and i'm calling it in method which fires every second using a timer in viewDidLoad- self.timer = [NSTimer scheduledTimerWithTimeInterval:1.0 target:self selector:@selector(updateCountdown) userInfo:nil repeats:YES]; -(void) updateCountdown { [self PlayTickTickSound:@"tick.caf"]; } i'm also playing a beep sound using avaudioplayer at a specific condition when alert appears.that works fine but this is not working as expected

  Read the article

• Blackberry stopwatch implementation

  - by Michaela

  I'm trying to write a blackberry app that is basically a stopwatch, and displays lap times. First, I'm not sure I'm implementing the stopwatch functionality in the most optimal way. I have a LabelField (_myLabel) that displays the 'clock' - starting at 00:00. Then you hit the start button and every second the _myLabel field gets updated with how many seconds have past since the last update (should only ever increment by 1, but sometimes there is a delay and it will skip a number). I just can't think of a different way to do it - and I am new to GUI development and threads so I guess that's why. EDIT: Here is what calls the stopwatch: _timer = new Timer(); _timer.schedule(new MyTimerTask(), 250, 250); And here is the TimerTask: class MyTimerTask extends TimerTask { long currentTime; long startTime = System.currentTimeMillis(); public void run() { synchronized (Application.getEventLock()) { currentTime = System.currentTimeMillis(); long diff = currentTime - startTime; long min = diff / 60000; long sec = (diff % 60000) / 1000; String minStr = new Long(min).toString(); String secStr = new Long(sec).toString(); if (min < 10) minStr = "0" + minStr; if (sec < 10) secStr = "0" + secStr; _myLabel.setText(minStr + ":" + secStr); timerDisplay.deleteAll(); timerDisplay.add(_timerLabel); } } } Anyway when you stop the stopwatch it updates a historical table of lap time data. When this list gets long, the timer starts to degrade. If you try to scroll, then it gets really bad. Is there a better way to implement my stopwatch?

  Read the article

• Schedule multiple events with NSTimer?

  - by AWright4911

  I have a schedule cache stored in a pList. For the example below, I have a schedule time of April 13, 2010 2:00PM and Aril 13, 2010 2:05PM. How can I add both of these to a queue to fire on their own? item 0 -Hour --14 -Minute --00 -Month --04 -Day --13 -Year --2010 item 1 -Hour --14 -Minute --05 -Month --04 -Day --13 -Year --2010 this is how I am attempting to schedule multiple events to fire at specific date / time. -(void) buildScheduleCache { MPNotifyViewController *notifier = [MPNotifyViewController alloc] ; [notifier setStatusText:@"Rebuilding schedule cache, this will only take a moment."]; [notifier show]; NSCalendarDate *now = [NSCalendarDate calendarDate]; NSFileManager *manager = [[NSFileManager defaultManager] autorelease]; path = @"/var/mobile/Library/MobileProfiles/Custom Profiles"; theProfiles = [manager directoryContentsAtPath:path]; myPrimaryinfo = [[NSMutableArray arrayWithCapacity:6] retain]; keys = [NSArray arrayWithObjects:@"Profile",@"MPSYear",@"MPSMonth",@"MPSDay",@"MPSHour",@"MPSMinute",nil]; for (NSString *profile in theProfiles) { plistDict = [[[NSMutableDictionary alloc] initWithContentsOfFile:[NSString stringWithFormat:@"%@/%@",path,profile]] autorelease]; [myPrimaryinfo addObject:[NSDictionary dictionaryWithObjects: [NSArray arrayWithObjects: [NSString stringWithFormat:@"%@",profile], [NSString stringWithFormat:@"%@",[plistDict objectForKey:@"MPSYear"]], [NSString stringWithFormat:@"%@",[plistDict objectForKey:@"MPSMonth"]], [NSString stringWithFormat:@"%@",[plistDict objectForKey:@"MPSDay"]], [NSString stringWithFormat:@"%@",[plistDict objectForKey:@"MPSHour"]], [NSString stringWithFormat:@"%@",[plistDict objectForKey:@"MPSMinute"]], nil]forKeys:keys]]; profileSched = [NSCalendarDate dateWithYear:[plistDict objectForKey:@"MPSYear"] month:[plistDict objectForKey:@"MPSMonth"] day:[plistDict objectForKey:@"MPSDay"] hour:[plistDict objectForKey:@"MPSHour"] minute:[plistDict objectForKey:@"MPSMinute"] second:01 timeZone:[now timeZone]]; [self rescheduleTimer]; } NSString *testPath = @"/var/mobile/Library/MobileProfiles/Schedules.plist"; [myPrimaryinfo writeToFile:testPath atomically:YES]; } -(void) rescheduleTimer { timer = [[NSTimer alloc] initWithFireDate:profileSched interval:0.0f target:self selector:@selector(theFireEvent) userInfo:nil repeats:YES]; NSRunLoop *runLoop = [NSRunLoop currentRunLoop]; [runLoop addTimer:timer forMode:NSDefaultRunLoopMode]; }

  Read the article

• NoSuchMethod exception when using scala Regex class... confused...

  - by hbatista

  Hi there, I have a simple Scala project that runs without any problems inside Eclipse, however, when packaged into a .jar I receive this exception when running it: Exception in thread "AWT-EventQueue-0" java.lang.NoSuchMethodError: scala.util.matching.Regex.replaceAllIn(Ljava/lang/CharSequence;Lscala/Function1;)Ljava/lang/String; What is going on here?... The code line in question, and the full stack are below. This is the offending line: "alt=\"[^>]+\">".r.replaceAllIn(inputStr, {_.replace(">", "/>")}) Full stack: Exception in thread "AWT-EventQueue-0" java.lang.NoSuchMethodError: scala.util.matching.Regex.replaceAllIn(Ljava/lang/CharSequence;Lscala/Function1;)Ljava/lang/String; at com.inosat.fuel.FuelStationDgge.fixhtml(FuelStationDgge.scala:40) at com.inosat.fuel.FuelStationDgge.setDetails(FuelStationDgge.scala:82) at com.inosat.fuel.DggeParser$$anon$1.propertyChange(DggeParser.scala:49) at java.beans.PropertyChangeSupport.firePropertyChange(Unknown Source) at java.beans.PropertyChangeSupport.firePropertyChange(Unknown Source) at java.beans.PropertyChangeSupport.firePropertyChange(Unknown Source) at org.jdesktop.beans.AbstractBean.firePropertyChange(AbstractBean.java:302) at org.jdesktop.http.async.AsyncHttpRequest.setReadyState(AsyncHttpRequest.java:705) at org.jdesktop.http.async.AsyncHttpRequest.access$600(AsyncHttpRequest.java:79) at org.jdesktop.http.async.AsyncHttpRequest$AsyncWorker.done(AsyncHttpRequest.java:831) at javax.swing.SwingWorker$5.run(Unknown Source) at javax.swing.SwingWorker$DoSubmitAccumulativeRunnable.run(Unknown Source) at sun.swing.AccumulativeRunnable.run(Unknown Source) at javax.swing.SwingWorker$DoSubmitAccumulativeRunnable.actionPerformed(Unknown Source) at javax.swing.Timer.fireActionPerformed(Unknown Source) at javax.swing.Timer$DoPostEvent.run(Unknown Source) at java.awt.event.InvocationEvent.dispatch(Unknown Source) at java.awt.EventQueue.dispatchEvent(Unknown Source) at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source) at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source) at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source) at java.awt.EventDispatchThread.pumpEvents(Unknown Source) at java.awt.EventDispatchThread.pumpEvents(Unknown Source) at java.awt.EventDispatchThread.run(Unknown Source)

  Read the article

• No output from exception

  - by Grasper

  Why does this code not print an exception stack trace? import java.util.concurrent.Executors; import java.util.concurrent.ScheduledExecutorService; import java.util.concurrent.TimeUnit; public class Playground { /** * @param args */ public static void main(String[] args) { startThread(); } private static void startThread() { ScheduledExecutorService timer = Executors .newSingleThreadScheduledExecutor(); Runnable r = new Runnable() { int dummyInt = 0; boolean dummyBoolean = false; @Override public void run() { dummyInt = Integer.parseInt("AAAA"); if (dummyBoolean) { dummyBoolean= false; } else { dummyBoolean= true; } } }; timer.scheduleAtFixedRate(r, 0, 100, TimeUnit.MILLISECONDS); } } How can I get it to? I would expect to see this: java.lang.NumberFormatException: For input string: "AAAA" at java.lang.NumberFormatException.forInputString(Unknown Source) at java.lang.Integer.parseInt(Unknown Source) at java.lang.Integer.parseInt(Unknown Source) at Playground$1.run(Playground.java:25) at java.util.concurrent.Executors$RunnableAdapter.call(Unknown Source) at java.util.concurrent.FutureTask$Sync.innerRunAndReset(Unknown Source) at java.util.concurrent.FutureTask.runAndReset(Unknown Source) at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$101(Unknown Source) at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.runPeriodic(Unknown Source) at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(Unknown Source) at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source) at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source) at java.lang.Thread.run(Unknown Source)

  Read the article

• iPhone programming - problem with CoreFoundation forking, PLEASE for the love of god help! lol

  - by Tom

  Hello all, I've been working on an iPhone for several months. It's a 2d shooting game akin to the old Smash TV type games. I'm doing everything alone and it has come out well so far, but now I am getting unpredictable crashes which seem to be related to CoreFoundation forking and not exec()ing, as the message THE_PROCESS_HAS_FORKED_AND_YOU_CANNOT_USE_THIS_COREFOUNDATION_FUNCTIONA LITY_YOU_MUST_EXEC__ always shows up somewhere in the debugger. Usually it shows up around a CFRunLoopRunSpecific and is related to either a timer firing or _InitializeTouchTapCount. I cannot figure out exactly what is causing the fork to occur. My main game loop is running on a timer, first updating all the logic and then drawing everything with openGL. There is nothing highly complex or unusual. I understand you cannot make CF calls on the childside of a fork, or access shared memory and things like that. I am not explicitly trying to fork anything. My question is: can anyone tell me what type of activity might cause CoreFoundation to randomly fork like this? I'd really like to finish this game and I don't know how to solve this problem. Thanks for any help.

  Read the article

< Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >