Search Results

Search found 2051 results on 83 pages for 'neural networks'.

Page 46/83 | < Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >

• 2nd/3rd version of wireless network appears

  - by neildeadman

  I replaced an old SpeedTouch ADSL router with a Netgear DG384 that I have and whilst doing so decided to change the wireless password. For this question assume my wireless network SSID is DeddersHome. On my netbook and macbook pro (running Win7) it won't connect to the Internet. When I hover over the tray icon for wireless it says "DeddersHome 2" and "DeddersHome 3" have no internet connection. What are these additional wireless networks? I can't see them in the wireless network list on any wireless device I have. Wired connections and wireless through my iPhone work fine. I saw this before with the SpeedTouch, but it just went away!! I also have one Apple AirPort Express connected to the wireless network which my Xbox is connected to (wired). This all worked before... I am going to remove AirPort to see if it is this causing the problem, but thought I'd ask the question to give it time for an answer whilst I continue to search. Cheers

  Read the article

• Use router as external high powered Wi-Fi adapter

  - by skywinder

  I need a powerful external Wi-Fi adapter for a couple of days. I heard that some types of router support this mode, allowing me to connect the router to my notebook and just use it as an external Wi-Fi interface. Is it possible to connect a router as an external Wi-Fi adapter? How can I determine it? Updated: My purpose is to set the router to monitor mode and check networks around through my notebook to provide better configuration for my network (power, channels, etc). My internal notebook Wi-Fi adapter is too weak for this purpose. Should I use special drivers for that? If yes, can someone describe, step-by-step, how to do it? p.s. I want to use ASUS RT-N56U as an external Wi-Fi adapter on OS X or Ubuntu.

  Read the article

• Is 192.168.122.1 a valid IP?

  - by Louise Hoffman

  From my understanding the networks is as follows Class A: 10.0.0.1 - 10.255.255.254 Class B: 172.16.0.1 - 172.16.255.254 Class C: 192.168.0.1 - 192.168.0.254 But then I look at ifconfig virbr0 on my Linux computer: virbr0 Link encap:Ethernet HWaddr 42:40:99:CB:02:7F inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:16 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:2842 (2.7 KiB) Here the IP address is 192.168.122.1. Is that an allowed IP? And if so, is 192.168 than actually a Class B network?

  Read the article

• Automatically updating routing table on server

  - by bramp

  I have a LAN with three routers on it, one connected to the Internet, one VPN router connected to a few remote sites, and a final route connected to a private network (using BGP to get prefix advertisements). On the same LAN I have multiple Linux servers which needs access to the networks behind each router. I have achieved this by configuring static routes on the server, pointing the different network prefixes to the correct router. This has worked well, but every time we connect to a new remote VPN, we have to change all the servers to be aware that the network is now accessible via the VPN, and not via the default Internet route. What I want is a way to automatically update the routes on all of the servers, when the route is added to a routers. Now, I could install Quagga or something similar on all the servers to receive router advertisements, but that seems like overkill. So my question is what is the easiest/simpliest way to update the routing tables on the server automatically, and what protocol is best suited for this purpose. thanks

  Read the article

• OpenVSwitch and Virtualbox configuration

  - by Newbie

  I am trying to setup a lab network with OpenVSwitch (Virtual L3 Switch). I want to connect my 3 Virtualbox guest machines (running Debian 6) using OpenVSwitch. But, confused as what should I do first and how should I do this. I mean should I install OpenVSwitch on my VM or on my host machine? If I install on my host machine, then should I make to connect to my VMs. OR If I install OpenVSwitch on one of my VM, then how to connect the rest of the VMs to virtual switch. I know, there is option to connect internal networks in virtualbox, but I a want L3 switch to interconnect my VLANs. Can someone guide me here. Please & Thank you.

  Read the article

• Multiple SSIDs better or worse

  - by swiss196

  I'm just setting up a network in a student house with 10 rooms, 3 floors. Configuration at the moment is as follows: Virgin Media 100mb Cable Virgin SuperHub on ground floor broadcasting on SSID1 Second AP(Edimax) wired on middle floor broadcasting on SSID2 These two networks server all 3 floors fairly well but I was wondering whether it would be better to setup an individual SSID for each floor (both the routers allow me to configure up to 3 ssids on each!). Would this help with speed issues, i.e if someone on the top floor is downloading/streaming etc, this wouldn't affect someone on the middle floor on a different SSID Or, will it have no effect? Thanks, Dave

  Read the article

• Is there no such thing as a Gigabit switch?

  - by Torben Gundtofte-Bruun

  According to the manufacturer specification, even my rather plain desktop computer has "Gigabit Ethernet". So when I want to copy large files over the LAN (not Internet) it would make sense to have a gigabit switch. I'm searching eBay for a gigabit switch for a planned home network upgrade. The products I find are all labeled "gigabit" but they all have 24 x 10/100Mbit autosensing ports and sometimes 2 x 10/100/1000Mbit autosensing ports. It was my understanding that 10/100 is ancient and that modern computers have network interfaces that work with 1000Mbit, so it would make sense to get a switch that has 24 x 1000Mbit ports. Did I misunderstand, or are sellers (deliberately?) mislabeling older hardware? (Let's not dive into wired vs. wireless networks and how "N" wireless is fast. You'd be right, but not answering the question.)

  Read the article

• Copy files between two windows machines on seperate domains

  - by Simon

  I need to copy several database backups between two computers. The source computer initiates the copy and is a Windows 2000 pc and is a member of domain1. The destination machine is running Windows Server 2000 and is a member of domain2. The machines are on separate networks physically connected via a firewall. The files are currently copied via ssh with http://sshwindows.sourceforge.net/ installed on the destination machine. There is no need to encrypt the contents during the copy, however the passwords should not be sent in the clear. I am looking for a way to copy the files without having to install a server on the destination. I specifically need help with how to set up the permissions and what ports would need to be opened on the firewall.

  Read the article

• Access points fighting for dominance?

  - by Phillip Oldham

  We have a small office with a large number of wireless devices (a mixture of desktop machines, laptops, and wifi-enabled phones) all working from a single Apple Airport Extreme which extends our wired network. I've added another Airport Extreme for resiliency, since we've been seeing a decrease in performance and (as far as I understand) access points can only handle a small number of clients. I set the new AP to extend the current network so that the clients weren't constantly switching between different wireless networks, however as soon as this AP was configured all the wireless devices started seeing network trouble, flicking on and off. I'm assuming that this is because both APs are reasonably strong, and the client can't decide which to use. What is the best route to follow to resolve this? What I'm aiming for is wireless resiliency; preferably having two APs share the network load, or if this isn't an option then having a primary AP with a "fail-over", should the primary go down for any reason.

  Read the article

• How do I access an Ubuntu VirtualBox guest at a static IP from an OS X host?

  - by David Siegel

  How does one configure an Ubuntu guest to use a static IP that's visible to an OS X host, and ensure that the static IP is independent of the host's network configuration? I previously used bridged networking for my guest, but I'm constantly moving my host between networks so the guest IP is always different. First, I tried setting the guest network configuration to NAT and forwarding host port 1022 to guest port 22, so I could at least ssh to a fixed address (localhost:1022): $ VBoxManage setextradata "Ubuntu Server" "VBoxInternal/Devices/e1000/0/LUN#0/Config/SSH/Protocol" "TCP" $ VBoxManage setextradata "Ubuntu Server" "VBoxInternal/Devices/e1000/0/LUN#0/Config/SSH/GuestPort" 22 $ VBoxManage setextradata "Ubuntu Server" "VBoxInternal/Devices/e1000/0/LUN#0/Config/SSH/HostPort" 1022 Then, $ ssh localhost -p 1022 ssh: connect to host localhost port 1022: Connection refused But this didn't work (guest has no network access with NAT and OS X refused the connection, as you can see). I'd love a general solution that would let me communicate with my guest at a fixed IP.

  Read the article

• Is it possible to add an existing Azure VM to an Azure Virtual Network?

  - by Dan Harris

  Didn't think this was directly related to programming, so thought Superuser would be better than Stack Overflow.... Is it possible to add an existing Azure VM to an Azure Virtual Network if you didn't add it to the virtual network at the time of creation? I can't see an option to change which Virtual Network the VM is connected to. Do you just have to do it at the time you create the VM, and if you don't do it then you will need to re-create the VM and delete the existing one? Example of the scenario: No VM's or Virtual Networks exist I create a VM (VM1), there is no virtual network so it isn't added to one Later I create a Virtual Network in Azure (Network1) It is possible to create another VM (VM2) and connect it to the Virtual Network (Network1), but can I connect VM1 to Network1 or must I delete VM1 and re-create it to get it connected to Network1?

  Read the article

• VPN within a VM to allow for internet access on the host

  - by David Durrant

  I have a network connection (created under Networks and Sharing) that I use to connect to a customer's site. But when I use this to connect to the site, I loose all access to the public internet, and can only access customer specific items. I want to circumvent this issue by creating a VM and then utilizing the VM to connect to the network location and interact within the customer's domain, while leaving my host machine open to the internet. I'm not extremely familiar with networking, but I have a few basic skills. Please let me know if this is possible and what the correct procedures are. I already have a VM created with VirtualBox, and both the host and guest are running Windows 7 x64. I have created duplicate VPNs already, but can only connect successfully on the host machine.

  Read the article

• Distribute terrabyte files to the public from web server

  - by MarkJ

  Hi We need to set up a website which makes two or three large files publicly available - the files will be 1 or 2 terrabytes each. Although they will be public, in practise I expect only a relatively small number of scientists will want to download them. What is the best way to allow this? I've had a quick talk to a web-hosting provider (rackspace) and they suggested a hybrid solution. An entry-level managed server (we predict fairly low traffic for the website, but we do need to install some custom CGI software). Some cloud storage which hooks into Limelight Networks. This would host the large files, for download by FTP. It sounded OK to me but I know relatively little about server administration. Does it make sense? Thanks in advance, Mark

  Read the article

• Is there a sensible way of 'teaming' two ADSL connections?

  - by Tim Long

  I work in an office complex that has two seperate ADSL connections, which they use to provide two seperate networks (actually both the ADSL routers go into a Cisco managed switch with two VLANs, one for each ADSL connection). Circumstances have changed so that 95% of the users are all on one ADSL connection. It would be great if there were a way to join together both connections to emulate a single connection at double the speed, but the ISP doesn't support bonding. So, is there a sensible way to take two completely seperate ADSL lines and use them to provide a single internet gateway?

  Read the article

• Changing Administrator password on a Windows 2008 web server

  - by Nick

  I've just taken over the administration of a Windows 2008 web server from a previous employee on a temporary basis. I need to change the Admin password as soon as I can but I've noticed that quite a few of the services also run under this account. So: Is there a quick way to find out which services will be affected by me changing the password or is it a question of going down the list? It doesn't seem right to me that the Admin account is used in this manner; should I create a different account for these services, or is using the Admin a/c standard practice? I realize everyone's servers / networks are set up differently, but are there any other items I should be aware of when changing the Admin password? Thanks

  Read the article

• IRC "proxy" for persistent connection between several computers

  - by Zeta Two

  I'm looking for a program that enables me to stay connected to one or more IRC networks and be able to view the log even though I connect from several different computers. I'm thinking about something like a proxy running on a server who always is connected to the servers/channels I want and to which I connect from whichever client I want to use. Does anyone know of a program like this? Edit: Apparently I could be running a IRC session in a shell on a server and connect to this but I would like something more GUI:ish.

  Read the article

• Troubleshoot telnet connection from Windows 7 to UNIX

  - by Sujay Ghosh

  I am trying to connect to an Asterisk server in USA. I am using telnet < IP Address 5038 from India to USA. The person in USA is able to telnet to the IP address and port from USA , but I am not able to do it from India. We are on different networks. I am using Windows 7 Ultimate, and have enabled the Telnet client. I have also used Putty without any success. Can someone suggest me what can be the problem and how can this be resolved.

  Read the article

• TeamViewer: How to disable color dithering for low-bit-depth screen settings

  - by gogowitsch

  I am using Terminal Services and TeamViewer a lot to access other computers, partly over slow networks. The problem described below is not affected by which of the two remote access services I am using. When accessing Windows 7 Professional machines, a great deal of text is hard to read as the background is dithered. Even for exactly the same colors, Windows 2003 does not seem to dither at all, but to choose the closest available color. I strongly prefer the latter, as I don't care for the exact colors, I just want to be able to read easily. I am not sure whether this is operating system-related. The programs on the remote systems do not allow me to change the color choices for the various backgrounds to anything sane. Is there a way to disable this color dithering using some target operating system setting that will do the trick for both Terminal Services and TeamViewer?

  Read the article

• Server problem (duh)

  - by j-t-s

  Sorry the title couldn't be more specific. I installed Abyss Web Server. I'm running Windows XP Home Edition and I have Wireless Mobile Broadband internet. I used to be able to access (and other people on other networks) my site by entering my ip address in the browser, but after I formatted, and the installed abyss web server again, this does not work anymore. There are no errors. I CAN visit my own site by entering my ip address BUT anybody else can't do the same, it just says "connecting" in the browser's statusbar and it never changes. I have consulted the docs and have found no help. Google hasn't helped with this problem either. Can somebody please help? Thank you :)

  Read the article

• Server problem (duh)

  - by j-t-s

  Sorry the title couldn't be more specific. I installed Abyss Web Server. I'm running Windows XP Home Edition and I have Wireless Mobile Broadband internet. I used to be able to access (and other people on other networks) my site by entering my ip address in the browser, but after I formatted, and the installed abyss web server again, this does not work anymore. There are no errors. I CAN visit my own site by entering my ip address BUT anybody else can't do the same, it just says "connecting" in the browser's statusbar and it never changes. I have consulted the docs and have found no help. Google hasn't helped with this problem either. Can somebody please help? Thank you :)

  Read the article

• Laptop connects to other network but not to my home wireless

  - by Nilesh

  My home network's wireless SSID is say "XYZ" I also have an ethernet wire from the same router. I have two laptops A and B Earlier both A and B were able to connect to my home internet through the ethernet and wireless. Suddenly, the laptop B can no longer connect to XYZ or through ethernet. When I do plug the wire, i get the connection icon all green but when I try to access any web page it errors out (page not found) But strangely laptop B connects to my neighbours wireless SSID "ABC". I have also tested laptop B with other networks and it connects fine. Laptop A and many other devices still connect fine with my home wireless "XYZ" Strange thing is when my laptop B connects wireless through XYz, it gets the IP address but then none of the browsers (chrome,firefox, IE) can show any web pages. What settings should I be checking on laptop B that is preventing it to connect to my home internet. Thank you

  Read the article

• Host a subdomain from an IIS7 server on another server

  - by brennanmur

  I am running a network with two server, one running SBS 2008 which hosts a majority of the network services (DNS, DHCP, Exchange, IIS, DC, AD...), including the primary webpage at mydomain.com. The other server is a linux box running an apache web server. I'm trying to set the apache server to host the site site2.mydomain.com. I have changed the DNS settings on the first server so that site2.mydomain.com can be accessed from the internal network, but I cannot access site2.mydomain.com from the internet. I have tried using server farms and application request routing cache, as described on this page, http://forums.iis.net/t/1156458.aspx, but I still can't access site2.mydomain.com from the internet. I don't have much experience with web servers, I usually just administer local networks, so I'm not sure if I'm going about this the right way. Any help or suggestions would be much appreciated.

  Read the article

• Issues connecting to WPA2 with User Authentication Mavericks?

  - by heinst

  I was on all the builds of the Mavericks beta and connecting to my University's network was fine. Then I upgraded to the public release and now I can't seem to connect to the internet. I can connect to other networks, but not my schools. Its a WPA2 network with a User Authentication. And my MacBook is a 2011? 2.2 GHz first gen i7 Quad Core with 8 GBs of RAM. Does anyone else have the same issue? Any tips on how to fix it? Thanks! heinst

  Read the article

• Routing table change to access Internet over mifi

  - by Randall Blake

  I have two networks at home. One uses a Verizon mifi wireless on 192.168.1.1. The other uses a dlink router on 192.168.0.1. I have one laptop with two nics, one wireless and one not. The wireless nic connects to the mifi. The Ethernet nic connects to the dlink router. It's ip is 192.168.0.2. I also have a laptop with only one nic connected to the dlink on 192.168.0.3. I want to connect laptop 2 to the Internet. Can I do that by adding an entry to the routing table so that destination 0.0.0.0 routes to 192.168.0.2? If I do that, will laptop 1 "know" that it should route traffic from 192.168.0.3 to 192.168.1.1? Thanks for any assistance.

  Read the article

• Audio and video streaming using Network Simulator in Linux

  - by Parth_90

  I am working on a project which is to show the simulation of streaming of audio and video data in wireless networks. I want to show the simulation that involves a base station, with few wireless stations. The base station should start sending data once it computes a certain value . On receiving the data, each wireless must begin communicating with the base station. I have gone through basic NS-2 tutorials from over here but I am not getting how to go about integrating it with my project. Can anyone tell me how to do it using NS2 or any other network simulator?

  Read the article

< Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >