while loops - Page 46 - Developer IT

Tracing\profiling instructions

- by LeChuck2k

Hi Y'all. I'd like to statistically profile my C code at the instruction level. I need to know how many additions, multiplications, devides, etc,... I'm performing. This is not your usual run of the mill code profiling requirement. I'm an algorithm developer and I want to estimate the cost of converting my code to hardware implementations. For this, I'm being asked the instruction call breakdown during run-time (parsing the compiled assembly isn't sufficient as it doesn't consider loops in the code). After looking around, It seems VMWare may offer a possible solution, but I still couldn't find the specific feature that will allow me to trace the instruction call stream of my process. Are you aware of any profiling tools which enable this?

Read the article

Find common nodes from two linked lists using recursion

- by Dan

I have to write a method that returns a linked list with all the nodes that are common to two linked lists using recursion, without loops. For example, first list is 2 - 5 - 7 - 10 second list is 2 - 4 - 8 - 10 the list that would be returned is 2 - 10 I am getting nowhere with this.. What I have been think of was to check each value of the first list with each value of the second list recursively but the second list would then be cut by one node everytime and I cannot compare the next value in the first list with the the second list. I hope this makes sense... Can anyone help?

Read the article

direct access to vector elements similar to arrays

- by mixm

hi. im currently creating a tile based game, where elements of the games are placed in four different vectors (since there are multiple game objects with different properties, hence stored in different vectors). these game elements themselves contain x and y coordinates similar to how they are stored in a two dimensional array. i was wondering if there was a way to access these vector elements similar to two dimensional array access (currently i am implementing an for loop to cycle the elements while comparing its coordinates). this kinda sucks when i need to refresh my display at every game cycle (since the large number of comparisons and loops). im implementing this in java btw.

Read the article

Filter across 2 lists using LINQ

- by Ajit Goel

I have two lists: a. requestedAmenities b. units with amenities. I want to filter those units that have any one of the "requested amenities". I have tried to achieve the same result using foreach loops but I believe it should be much easier using LINQ. Can someone please help\advice? UnitAmenities unitSearchRequestAmenities = unitSearchRequest.Amenities; var exactMatchApartmentsFilteredByAmenities= new Units(); IEnumerable<string> requestAmenitiesIds = unitSearchRequestAmenities.Select(element => element.ID); foreach (var unitCounter in ExactMatchApartments) { IEnumerable<string> unitAmenities = unitCounter.Amenities.Select(element => element.ID); foreach (var requestAmenityId in requestAmenitiesIds) { foreach (var unitAmenity in unitAmenities) { if (requestAmenityId == unitAmenity) { exactMatchApartmentsFilteredByAmenities.Add(unitCounter); //break to the outmost foreach loop } } } }

Read the article

Process every pair in a sequence

- by Henry Jackson

I'm looking for a concise way to process every (unordered) pair of elements in a sequence in .NET. I know I can do it with nested foreach loops, but I was looking for something a little more readable. I was imagining something like a modified Any() extension method: IEnumerable<Transaction> transactions = ... if (transactions.AnyPair( (first, second) => first.UniqueID == second.UniqueID)) throw ... Or maybe a foreach-style one: IEnumerable<JigsawPiece> pieces = ... pieces.ForEachPair( (first, second) => { TryFit(first, second); }); This question has been asked for other languages (e.g. see http://stackoverflow.com/questions/942543/operation-on-every-pair-of-element-in-a-list), but I'm looking for a .NET solution.

Read the article

Change a Recursive function that has a for loop in it into an iterative function?

- by Bill

So I have this function that I'm trying to convert from a recursive algorithm to an iterative algorithm. I'm not even sure if I have the right subproblems but this seems to determined what I need in the correct way, but recursion can't be used you need to use dynamic programming so I need to change it to iterative bottom up or top down dynamic programming. The basic recursive function looks like this: Recursion(i,j) { if(i>j) return 0; else { //This finds the maximum value for all possible subproblems and returns that for this problem for(int x = i; x < j; x++) { if(some subsection i to x plus recursion(x+1,j) is > current max) max = some subsection i to x plus recursion(x+1,j) } } } This is the general idea, but since recursions typically don't have for loops in them I'm not sure exactly how I would convert this to iterative. Does anyone have any ideas?

Read the article

border highlighting loop with jquery

- by Tek

I'm having trouble coming up with a loop that changes the border color of an image from black to yellow and yellow to black over x seconds. Then applying an interrupt to the loop when the image gets clicked on. I don't know where to start, can someone point me in the right direction? I think I may be using the wrong tools to properly write this. Here's what I've come up so far, though if there's a better way to write this, do share! for( i = 100; i >= 0; i--) { $("#imgid").css("border-color", 'rgb(' + i + '%,' + i + '%,0)'); } I'm having trouble picturing how I could combine two loops so that I can also count upwards as well so that it will turn into yellow and back to black. I also don't know how to go about controlling the amount of time it takes for that loop to execute and creating an interrupt when #imigid is clicked. Which is where I'm not sure how to write.

Read the article

RealPath returns an empty string

- by Abs

Hello all, I have the following which just loops through the files in a directory and echo the file names. However, when I use realpath, it returns nothing. What am I doing wrong: if ($handle = opendir($font_path)) { while (false !== ($file = readdir($handle))) { if ($file != "." && $file != ".." && $file != "a.zip") { echo $file.'<br />';//i can see file names fine echo realpath($file);// return empty string?! } } closedir($handle); } Thanks all for any help on this. ~I am on a windows machine, running php 5.3 and apache 2.2.

Read the article

Convince teammates to follow standards

- by folone

There's always one or two guys, who think, they are great programmers, and they don't need any literature/specifications/etc. They usually write awful code, that makes you want to hurt them. They catch and suppress Throwable's, return null's, concatenate String's in large loops, do other stupid stuff. So the question is — How do I make such a person follow best practices and specifications? He does not listen (cause he's the best programmer), team lead does not give a damn ("It actually works, so why changing it?.."), and I'm actually tired of rewriting that awful code on my own. What do I do? What would you do?

Read the article

Looping through with double variables

- by Luke

I have two arrays with two sets of values in ($a[] and $b[]) I want to do something like the following: $a[0] - $b[0] $a[0] - $b[1] $a[1] - $b[0] $a[1] - $b[1] This will continue until the arrays reach the end. So i want a hyphen to seperate the two arrays, with the first array staying the same until the second array has looped through. I am trying to get this in a dropdown with option value. How could i achieve this? I never tried doing any loops with two varaibles like that before, I literally have no idea at all! Thankyou

Read the article

Combining query rows in a loop

- by icemanind

I have the following ColdFusion 9 code: <cfloop from="1" to="#arrayLen(tagArray)#" index="i"> <cfquery name="qryGetSPFAQs" datasource="#application.datasource#"> EXEC searchFAQ '#tagArray[i]#' </cfquery> </cfloop> The EXEC executes a stored procedure on the database server, which returns rows of data, depending on what the parameter is. What I am trying to do is combine the queries into one query object. In other words, if it loops 3 times and each loop returns 4 rows, I want a query object that has all 12 rows in one object. How do I acheive this?

Read the article

How to increase query speed without using full-text search?

- by andre matos

This is my simple query; By searching selectnothing I'm sure I'll have no hits. SELECT nome_t FROM myTable WHERE nome_t ILIKE '%selectnothing%'; This is the EXPLAIN ANALYZE VERBOSE Seq Scan on myTable (cost=0.00..15259.04 rows=37 width=29) (actual time=2153.061..2153.061 rows=0 loops=1) Output: nome_t Filter: (nome_t ~~* '%selectnothing%'::text) Total runtime: 2153.116 ms myTable has around 350k rows and the table definition is something like: CREATE TABLE myTable ( nome_t text NOT NULL, ) I have an index on nome_t as stated below: CREATE INDEX idx_m_nome_t ON myTable USING btree (nome_t); Although this is clearly a good candidate for Fulltext search I would like to rule that option out for now. This query is meant to be run from a web application and currently it's taking around 2 seconds which is obviously too much; Is there anything I can do, like using other index methods, to improve the speed of this query?

Read the article

Is there a shorthand version of HTML available?

- by monguin

I remember reading an article about a shorthand version, or extension, of HTML a few months ago. Its purpose was to make HTML code significantly more concise, by removing end tags, and it may have allowed loops of some sort as well. I want to use it now, but I can't seem to remember what it was called. Searching online, I found HAML, but HAML syntax doesn't look like the example that I remember from the article. The syntax from the article made use of right angle brackets, which were a sort of replacement for indentation. Can anyone identify this language?

Read the article

Can anyone help with java? Finding common nodes from two linked lists using recursion

- by Dan

I have to write a method that returns a linked list with all the nodes that are common to two linked lists using recursion, without loops. For example, first list is 2 - 5 - 7 - 10 second list is 2 - 4 - 8 - 10 the list that would be returned is 2 - 10 I am getting nowhere with this.. What I have been think of was to check each value of the first list with each value of the second list recursively but the second list would then be cut by one node everytime and I cannot compare the next value in the first list with the the second list. I hope this makes sense... Can anyone help?

Read the article

which jquery plugin can do the dynamic smooth vertical menu scroll?

- by helltohigh

ok i'm new to jquery, but how can i do a feed like the one at twitter.com where they have the "top tweets" update with the latest tweet by scrolling the whole menu down just enough space to allow the new item to fade into the top spot? easy to do? do i need a plugin? i looked around and what i don't want is just a carousal type plugin that just loops in a cirle. i want to add a new news feed item dynamically like in the twitter top tweets. thanks

Read the article

Performance of: if (OBJECT_INSTANCE is TYPE)

- by Axonn

I am working both in C# and ActionScript 3. Both language are type-aware, so you can do verifications such as: if (some_object_instance is SomeClassName_ThatIs_SomeType) I'm doing these kind of verifications in a few places. Might be a dumb question, but I will ask it anyway, and I want answers from both camps, C# and ActionScript: What goes on behind the scenes? Is it Reflection? If is, isn't this a long verification which might degrade performance if done in thousands of loops? And by "degrade performance" I mean, is it more intensive than say if (Math.sqrt(8) > Math.sin(10))

Read the article

Cakephp, an elegant solution to quantities?

- by Smickie

Hi, I have a shopping cart system in Cakephp, this table has all your usual maguffins: user_ids, product_ids, option_lists ect. It also has quantity. I currently have some awful nested loops to check if the record is the same as any in there, if so add one to the quantity. If not add a new cart item. This loop has to check associated list items and product options, so it goes quite deep. What I'm wondering is if there is a more elegant way of checking to see if two cart items in a database are similar (everything except for quantity). Cheers!

Read the article

syntax to express mathematical formula concisely in your language of choice

- by aaa

hello. I am developing functional domain specific embedded language within C++ to translate formulas into working code as concisely and accurately as possible. Right now my language looks something like this: // implies two nested loops j=0:N, i=0,j (range(i) < j < N)[T(i,j) = (T(i,j) - T(j,i))/e(i+j)]; // implies summation over above expression sum(range(i) < j < N))[(T(i,j) - T(j,i))/e(i+j)]; I am looking for possible syntax improvements/extensions or just different ideas about expressing mathematical formulas as clearly and precisely as possible. Can you give me some syntax examples relating to my question which can be accomplished in your language of choice which consider useful. In particular, if you have some ideas about how to translate the above code segments, I would be happy to hear them Thank you

Read the article

Better data-structure design

- by Tempname

Read the article

C optimization breaks algorithm

- by Halpo

I am programming an algorithm that contains 4 nested for loops. The problem is at at each level a pointer is updated. The innermost loop only uses 1 of the pointers. The algorithm does a complicated count. When I include a debugging statement that logs the combination of the indexes and the results of the count I get the correct answer. When the debugging statement is omitted, the count is incorrect. The program is compiled with the -O3 option on gcc. Why would this happen?

Read the article

c# GUI changing a listbox from another class

- by SlowForce

I've written a multithreaded server that uses tcplistener and a client handler class that controls input and output. I also have a GUI chat client. The chat client works fine and the console version of the server also works well. I have a start() method in the partial(?) Form class, which I run from a new thread when I click a button, that starts the TCP Listener and loops through and accepts socket requests. For every request a new ClientHandler object is created and the socket is passed to this object before being used in a new handler thread. The ClientHandler is a different class to the form and I'm having real problems writing data to the Listbox in the Form class from within the ClientHandler class. I've tried a few different ways of doing this but none of them work as they involve creating a new form class within the ClientHandler. Any help or advice on what I should be reading to help me would be really appreciated.

Read the article

htaccess redirect without user knowing

- by Khuram

We are running multiple domains through the same code and we want to save their images in their respective folders. Here's what we are doing. /images/www.domain1.com/logo.jpg /images/www.domain2.com/logo.jpg now, what I want to know is, is this possible in htaccess that we rewrite the urls without user suspecting anything. This is what I want that <img src="/images/logo.jpg" /> should internally become through htaccess RewriteRule ^images/(.*)$ /images/{HTTP_HOST}/$1 [L,R=301] But my question is, The above redirect continually loops Can I achieve the img effect without user or admin suspecting anything? Sincerely, Khuram

Read the article

two HashMap iteration

- by user431276

I have two HashMaps and I can iterate both hashmaps with following code Iterator it = mp.entrySet().iterator(); while (it.hasNext()) { Map.Entry pairs = (Map.Entry)it.next(); String firstVal = pairs.getValue(); } Iterator it2 = mp2.entrySet().iterator(); while (it2.hasNext()) { Map.Entry pairs2 = (Map.Entry)it.next(); String SecondVal = pairs2.getValue(); } myFunction(firstVal, SecondVal) Is there anyway to iterate two hashmaps at the same time without using two loops? Currently, I have a method that accepts two parameters and each parameter value is stored in first and second hashmap. I have to iterate first hash then second to get values. I think there must be a good way to do it but I don't know :( P.S: there could be some errors in above code as this is just an example to explain my problem. Each iterator is a method in original program and accept one parameter. I couldn't copy past real time functions as they are HUGE !

Read the article

Is GOTO really as evil as we are led to believe?

- by RoboShop

I'm a young programmer, so all my working life I've been told GOTO is evil, don't use it, if you do, your first born son will die. Recently, I've realized that GOTO actually still exists in .NET and I was wondering, is GOTO really as bad as they say, or is it just because everyone says you shouldn't use it, so that's why you don't. I know GOTO can be used badly, but are there any legit situations where you may possibly use it. The only thing I can think of is maybe to use GOTO to break out of a bunch of nested loops. I reckon that might be better then having to "break" out of each of them but because GOTO is supposedly always bad, I would never use it and it would probably never pass a peer review. What are your views? Is GOTO always bad? Can it sometimes be good? Has anyone here actually been gutsy enough to use GOTO for a real life system?

Read the article

Nested for loop error with !null checking an element that doesn't exist

- by Programatt

I am currently using nested for loops in a 2D array of size 4,2. When I run my program, I get index out of bounds Exception on the following line else if (state[i][j+1] != null && state[i][j].getFlash() <= state[i][j].getCycleLength() && state[i][j+1].getCycleLength() == state[i][j].getCycleLength()){ } It says the index out of bounds is 2. I would understand the error if I wasn't checking to see if [i][j+1] wasn't null, but I don't understand the exception with the check? I tried moving around the !null check but the program still fails on this line. Any help would be greatly appreciated. Stack trace: Exception in thread "Timer-0" java.lang.ArrayIndexOutOfBoundsException: 2 at NatComp.data$1.run(data.java:67) at java.util.TimerThread.mainLoop(Timer.java:512) at java.util.TimerThread.run(Timer.java:462)

Search Results

Search found 1698 results on 68 pages for 'while loops'.

Page 46/68 | < Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53 | Next Page >

- by LeChuck2k

- by Dan

- by mixm

- by Ajit Goel

- by Henry Jackson

- by Bill

- by Tek

- by Abs

- by folone

- by Luke

- by icemanind

- by andre matos

- by monguin

- by Dan

- by helltohigh

- by Axonn

- by Smickie

- by aaa

- by Tempname

- by Halpo

- by SlowForce

- by Khuram

- by user431276

- by RoboShop

- by Programatt

< Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53 | Next Page >