Search Results

Search found 23890 results on 956 pages for 'issue'.

Page 462/956 | < Previous Page | 458 459 460 461 462 463 464 465 466 467 468 469  | Next Page >

• Only some motherboards can support faster RAM?

  - by Wesley

  This is a question relating to one of my builds. Here are the specs: ECS P4VXASD2+ V5.0 motherboard Intel P4 Northwood 2.8 GHz (533 MHz FSB, 512 KB L2) 2x 1GB PC3200 DDR RAM Maxtor 300GB IDE HDD 16 MB NVIDIA TNT2 Pro AGP OKIA 300W ATX PSU Gigabyte 52x CD-ROM The issue right now is that I'm trying to install Windows XP from the CD drive but the computer randomly restarts partway through installation. My other build was BSODing due to RAM latency errors. This ECS board manual states that memory modules "up to 333 MHz" (i.e. PC2700) is supported. However, I am running PC3200 modules, which is clearly faster than PC2700. Would this be causing the computer from randomly restarting? EDIT 1: I also wanted to mention that my Emachines T2482 is actually running 2x 512MB PC3200 DDR RAM when it should only be supporting PC1600 and PC2100 DDR RAM. Yet there are no issues with it.

  Read the article

• What can be done to decrease the number of live issues with applications?

  - by User Smith

  First off I have seen this post which is slightly similar to my question. : What can you do to decrease the number of deployment bugs of a live website? Let me layout the situation for you. The team of programmers that I belong to have metrics associated with our code. Over the last several months our errors in our live system have increased by a large amount. We require that our updates to applications be tested by at least one other programmer prior to going live. I personally am completely against this as I think that applications should be tested by end users as end users are much better testers than programmers, I am not against programmers testing, obviously programmers need to test code, but they are most of the times too close to the code. The reason I specify that I think end users should test in our scenario is due to the fact that we don't have business analysts, we just have programmers. I come from a background where BAs took care of all the testing once programmers checked off it was ready to go live. We do have a staging environment in place that is a clone of the live environment that we use to ensure that we don't have issues between development and live environments this does catch some bugs. We don't do end user testing really at all, I should say we don't really have anyone testing our code except programmers, which I think gets us into this mess (Ideally, we would have BAs or QA or professional testers test). We don't have a QA team or anything of that nature. We don't have test cases for our projects that are fully laid out. Ok, I am just a peon programmer at the bottom of the rung, but I am probably more tired of these issues than the managers complaining about them. So, I don't have the ability to tell them you are doing it all wrong.....I have tried gentle pushes in the correct direction. Any advice or suggestions on how to alleviate this issue ?

  Read the article

• Compiz slow under proprietary nvidia driver

  - by gsedej

  Hi! I am using Ubuntu 10.10 and have problem with proprietary nvidia driver for my GeForce GTS 250. I have issue with poor Compiz performance. And there is also open-source "noueau" driver. Proprietary: I tried many versions but neither works fast on desktop. This means 30 FPS without heavy effects. Currently I am using version 270.18. Even normal desktop use feels bad (moving windows) In games (and 3D benchmark) it is really good! (Unigine Heaven works good!) Open-source "nouveau": Very fast on desktop with heavy effects (blur, ...). I have 300 FPS and more, even in Expo mode. Games were good but not as good as prop. And driver causes xorg to crash even the latest (ppa:xorg-edgers/nouveau), so I switched back to proprietary. I also have computer with Ubuntu 10.04, GeForce 8600GT and drivers around 185.x and Compiz works great there. There is similar question Nvidia proprietary driver performance in 10.10 Which version of nvidia (prop) driver is fast in Compiz in Ubuntu 10.10? How do you install a specific version of nvidia driver? Is it the case that each newer driver works slower on compiz?

  Read the article

• Using a MiFi via WDS

  - by Joril

  I have a Huawei R201 MiFi connected to the internet, and I'd like to use its internet connection even from devices that don't have WiFi, so I grabbed a wireless router I had lying around and configured WDS so that it'd connect to the MiFi, and this is working nicely (I can ping the MiFi from the router web interface). The next step was connecting my PC to the router via ethernet cable, but now I'm stuck... The PC can ping the router, but not the MiFi (they're all on the same subnet). Since the router can ping the MiFi, I guess this is some kind of routing issue? Should I get a more "flexible" router, such as one with DD-WRT maybe? Is what I'm trying to do even possible? (For the record the PC is running Lubuntu 11.10)

  Read the article

• Class Design for special business rules

  - by Samuel Front

  I'm developing an application that allows people to place custom manufacturing orders. However, while most require similar paperwork, some of them have custom paperwork that only they require. My current class design has a Manufacturer class, of which of one of the member variables is an array of RequiredSubmission objects. However, there are two issues that I am somewhat concerned about. First, some manufacturers are willing to accept either a standard form or their own custom form. I'm thinking of storing this in the RequiredSubmission object, with an array of alternate forms that are a valid substitute. I'm not sure that this is ideal, however. The major issue, however, is that some manufacturers have deadline cycles. For example, forms A, B and C have to be delivered by January 1, while payment must be rendered by January 10. If you miss those, you'll have to wait until the next cycle. I'm not exactly sure how I can get this to work with my existing classes—how can I say "this set of dates all belong to the same cycle, with date A for form A, date B for form B, etc." I would greatly appreciate any insights on how to best design these classes.

  Read the article

• Is a matching entry in /etc/hosts required for hostname?

  - by JohnWoltman

  I was installing a Tomcat webapp that refused to work until I stumbled on someone else's issue with an unrelated product. The solution was to add the machine's name to /etc/hosts, to match the name returned by hostname. Is this required for general Linux networking to function correctly? My webapp is running in a virtual machine so that I can test the webapp, and I don't normally bother with the /etc/hosts file on VMs. I just shook my fist and cursed Tomcat and webapp's behavior. I read http://serverfault.com/questions/118823, but that doesn't say if it's required or not.

  Read the article

• Snow Leopard connecting to Unbuntu 10.04 through Samba failure -- need help fixing.

  - by Chris Altman

  I have a Ubuntu 10.04 web server. I want to connect to it with my OSX 10.6 machine and Finder. I have installed openSSH and Samba on the Ubuntu machine. In my smb.conf I have a Share Definition: [www] comment = Development Computer WWW path = /var/www writeable = yes browseable = yes allow hosts = 192.168.1. I can connect to the machine through Finder using a non-root user. When I attempt to add files thought Finder I get an "Insufficient Permissions" error. Please help. I am not sure if the issue is in the Samba configuration or OSX 10.6 Thank you

  Read the article

• Mouse Icon Distorted on Secondary Display

  - by Nathan Taylor

  I have a strange issue with a dual monitor, extended desktop setup where the mouse is always fine on the primary monitor, but sometimes when I move to the secondary display the icon becomes garbled and distorted (sometimes it just looks like a vertical line, instead of a pointer). If I move the mouse back and forth rapidly between primary and secondary displays the level of "garbledness" of the icon will change and sometimes go away completely. If I switch the display settings and set it to "Duplicate Monitor 1" then I end up with a garbled icon on the primary display and an accurate one on the secondary. Very annoying. Computer is Windows 7 Ultimate with an HD8750 and the newest video drivers. Monitors are two Dell 24" displays connected via DVI cables. I have also tried VGA cables.

  Read the article

• How to troubleshoot intermittent and irregular connection errors on home network (preferrably Mac client)

  - by Martin

  Hi, I'm experiencing intermittent connection errors in our home network from two different computers, normally "Connection Reset" when browsing, but also other issues such as very slow throughput. I have approximately a network setup as below: ISP-Cable Modem-Dlink DIR 655 Router-(Ethernet)-Fon Router-Mac/Windows laptop Basically, is there a simple way to monitor the network and detect where issues are coming from? Right now we don't know if it is the Fon router, the Dlink router, the modem or the ISP. As the issue is intermittent, is there a software that regularly traceroutes a set of destinations and tests e.g. throughput, something that can help us figure out where in the chain the errors are introduced? The more automatic network monitor, the better.

  Read the article

• Troubleshooting intermittantly long 'page loading' problem

  - by justSteve

  Working off IIS 7 with an asp.net mvc app. Most page accesses are lightening quick. Sometimes the browser reports 'page loading' for an exceptionally long time. We are still in the development/testing mode so it's not a network/bandwidth issue. Happens in both IE and FF. No explicit error conditions in the server logs. If i could reproduce it i could run firebug/fiddler to give more info. As it is, it's a little too infrequent to simply leave both those running hoping for the condition to fire - unless/until that's the only option to get better info. I have a hunch this is client-side jquery/ajax related but only a hunch - don't have enough background in either jQuery or MVC to really know what can go wrong. Any initial troubleshooting suggestions welcome. thx

  Read the article

• Site Web Analytics not updating Sharepoint 2010

  - by Rohit Gupta

  If you facing the issue that the web Analytics Reports in SharePoint 2010 Central Administration is not updating data. When you go to your site > site settings > Site Web Analytics reports or Site Collection Analytics reports  You get old data as in the ribbon displayed "Data Last Updated: 12/13/2010 2:00:20 AM" Please insure that the following things are covered: Insure that Usage and Data Health Data Collection service is configured correctly. Log Collection Schedule is configured correctly Microsoft Sharepoint Foundation Usage Data Import and Microsoft SharePoint Foundation Usage Data Processing Timer jobs are configured to run at regular intervals One last important Timer job is the Web Analytics Trigger Workflows Timer Job insure that this timer job is enabled and scheduled to run at regular intervals (for each site that you need analytics for). After you have insured that the web analytics service configuration is working fine and the Usage Data Import job is importing the *.usage files from the ULS LOGS folder into the WSS_Logging database, and that all the required timer jobs are running as expected… wait for a day for the report to get updated… the report gets updated automatically at 2:00 am in the morning… and i could not find a way to control the schedule for this report update job. So be sure to wait for a day before giving up :)

  Read the article

• How to configure chrome to open magnet url's with deluge?

  - by michael_n

  After upgrading to Ubuntu 11.04 (natty) from 10.10, I can no longer open magnet (torrent) links in Chromium, and set deluge to automatically open and accept the url. (Edit: currently ".torrent" files are not a problem, but magnet url's, e.g. of the form "magnet:?xt=urn:...", are now the only problem. Not sure if something updated...?) Rather, now only transmission will automatically open torrents, magnet links, etc. There doesn't seem to be a way to set deluge to be the default torrent client. (And, there also doesn't seem to be a "default application" setting for bittorrent client to replace transmission w/ deluge.) Notes: I found some old threads on this issue, and only a one or two newer ones. The newer threads seem to suggest xdg-open is to blame. But not many people seem to be running into this problem, so... maybe it's just me? Not using firefox, so manually setting apps for mime-types or extensions doesn't work (that's not an option in chrome/chromium, afaik -- you have to rely on the OS) I uninstalled transmission, and then basically nothing happened when clicking on torrent/magnet links. running from the shell also opens transmission (not deluge): xdg-open "magnet:?xt=urn:bt..&tr=http://tracker.....com/announce" My current url handlers are: $ gconftool -a /desktop/gnome/url-handlers/magnet command = deluge "%s" needs_terminal = false enabled = true The only work-around I have (which does work) is to rename /usr/bin/transmission-gtk{,.bak} and create my own /usr/bin/transmission-gtk : $ cat /usr/bin/transmission-gtk #!/bin/bash deluge "$@" Anyone else run into this, know of a bug, workaround, or...?

  Read the article

• Laptop VGA Out Stopped Working

  - by Jack7890

  I regularly use an external monitor with my laptop. Today, when I booted up, the external monitor refused to work--it just keeps going into power save mode. I tried a different external monitor and had the same problem, so it must be a problem with the laptop itself. Things I've tried: Going into the Display Settings via the Control Panel (I'm running Vista) and attaching/unattaching/reattaching the external monitor. Turning the computer off, unplugging, plugging it back in, and rebooting Blowing into the VGA out to get rid of any dust Toggling through the Fn+F7 options I'm thinking maybe this is an issue with my video card? If necessary, I'm comfortable opening up my laptop and playing around with things, but I'm not sure what to look for. Does anyone have any suggestions?

  Read the article

• Recommended Setup

  - by Chris Ryan

  I have been running into issue with my MSSQL Database setup with speed. Here is my scenario. About 100M Rows Average: 1k Updates Per Second Hard Drives: RAID 10 SSD MDF --Active Time: 0 Log Drives: 1 SSD LDF - Simple Recovery --Active Time 99.9 --Queue: 8 I do not need a back up of the log so it is set to simple recovery but my bottleneck is still at my log. I get high WAITLOG times and thus it can not update any faster. I can't do bulk updates/transactions and each update needs to be one at a time. Is my only option to increase write performance of the log drives, add a RAID drives? Any suggestions on increasing the performance?

  Read the article

• Laptop VGA Output Stopped Working

  - by Jack7890

  I regularly use an external monitor with my laptop. Today, when I booted up, the external monitor refused to work--it just keeps going into power save mode. I tried a different external monitor and had the same problem, so it must be a problem with the laptop itself. Things I've tried: Going into the Display Settings via the Control Panel (I'm running Vista) and attaching/unattaching/reattaching the external monitor. Turning the computer off, unplugging, plugging it back in, and rebooting Blowing into the VGA out to get rid of any dust Toggling through the Fn+F7 options I'm thinking maybe this is an issue with my video card? If necessary, I'm comfortable opening up my laptop and playing around with things, but I'm not sure what to look for. Does anyone have any suggestions?

  Read the article

• Can't start webcam for google video services

  - by wisemonkey

  I've got Ubuntu 11.10 64 bit and have installed the google video chat plugin. However webcam doesn't seem to work (black screen -- no video at all). For cheese it works but shows really bad (black and white kinda) image. Following some link I installed guvcview if I start it then image looks neat. Any suggestions on how can it be fixed? If it helps I've tried the solution: $ sudo mv /opt/google/talkplugin/GoogleTalkPlugin /opt/google/talkplugin/GoogleTalkPlugin.old $ sudo gedit /opt/google/talkplugin/GoogleTalkPlugin and putting following lines in: #!/bin/sh LD_PRELOAD=/usr/lib32/libv4l/v4l1compat.so /opt/google/talkplugin/GoogleTalkPlugin.old OR #!/bin/sh LD_PRELOAD=/usr/lib/x86_64-linux-gnu/libv4l/v4l1compat.so /opt/google/talkplugin/GoogleTalkPlugin.old Cause I've both files. Finally $sudo chmod +x /opt/google/talkplugin/GoogleTalkPlugin.old I closed and reopened chrome then started gmail tried video call -- black screen :-/ Ok so today finally google+ provided me with trouble shoot link and advised me: The plug-in won't install If you're having trouble installing the plug-in, or are receiving a message asking you to reinstall it, you should check to make sure your configuration is right. To do so simply: Check to make sure the Google Talk Plugin Video Accelerator and Google Talk NPAPI Plugin are enabled. If you're using Chrome you can type about:plugins in your browser to display your plug-ins. Make sure you're not using Internet Explorer 64-bit (this is a browser version that is 64 bit as opposed to 32 bit). Ensure that you don't have any "click to run" extensions enabled. If you're still experiencing this issue after checking your configuration you can follow these steps: Refresh the browser page. Close any running Google Talk plug-in processes. Close all open and running browser processes. Restart your computer. Uninstall and then reinstall the plug-in. Try a different browser such as Google Chrome or Mozilla Firefox. I looked in about:plugins for chrome and firefox: I don't have Google Talk NPAPI Plugin, does that matter? and I thought its installed with google talk plugin or no?

  Read the article

• Database Vault integration available

  - by Anthony Shorten

  One of the major features of Oracle Utilities Application Framework V4.1 is the provision of a base solution for integration to the Database Vault product. Database Vault is part of Oracle’s security portfolio of product and allows database user permissions to be locked down to only allow appropriate users appropriate access to the product data. By default, when you install the product database, administrators and SYSDBA users have full DML (SELECT, INSERT, UPDATE and DELETE access) to the schemas they own and in the case of the SYSDBA users, all schemas on the database. This can be perceived as an issue. Database Vault allows an additional layer of security to disable inappropriate access. In Oracle Utilities Application Framework, a prebuilt Database Vault solution has been provided to provide base DML access to product data for product users only. The solution is shipped with the database installation files and includes a set of SQL files to create, disable, enable and delete the Database Vault objects. The solution contains a Database Vault Realm, RuleSets, Rules and Command Rules that can be used as is or extended to meet site specific needs. The solution is consistent with other Database Vault solutions provided for other Oracle applications such as PeopleSoft, E-Business Suite, JD-Edwards and Siebel. Customers familiar with the database vault solutions for those products will recognize the similarities between the solutions. For more details of the solution, refer to the Database Vault Integration for Oracle Utilities Application Framework Based Products on My Oracle Support at KB Id: 1290700.1.

  Read the article

• Why does my Canon printer print document pages at ~25% size?

  - by Erlend Alvestad

  I'm using a Canon PIXMA MP250, and I'm running 12.04 LTS. The printer's been working fine for the couple of months I've been a Linux user. That is, until today. I just printed a 1-page ODT document from LibreOffice. Instead of filling the sheet, the document occupies only a little less than 25% of the paper, in the top left corner, and the text has also shrunk to something like 5pt. I looked at the paper format settings for the document and printer, which were set to "letter". I changed these to "A4", hoping that would solve the issue. There was no change, however. I tried printing a different document in LibreOffice and got the same result. I tried exporting the original document to PDF and printing it through Document Viewer. Same result. I then printed a web page from Google Chrome. No formatting problems there. In all cases the print preview looks fine.

  Read the article

• Pxe boot ubuntu server - corrupt packages

  - by Stu2000

  I have set up a cobbler pxe boot server and managed to get centos5.8 to fully automatically install. Unfortunately with Ubuntu 12.04-server-i386, it stops mid-way through with a message stating that packages are corrupt. I tried following this tip to unzip the Packages.gz file which results in an empty Packages file with nothing in it. Other people suggested doing a touch command which essentially does the exact same thing, an empty Packages file. That results in me getting a different message that states: Couldn't retrieve dists/precise/restricted/binary-i386/Packages. This may be due to a network..... Does anyone know how to work around this issue? Hitting continue before having made the tip/workaround resulted in ubuntu installing fine, but I need to be able to provide no manual input. Any advice appreciated, Stu

  Read the article

• Determine/resolve filepath/alias of a certain command in the Windows command prompt

  - by porg

  How can I find out to which filepath (or alias) a certain command input will point to, in the Windows command prompt? Specifically Windows XP, info on other versions also appreciated! On Unix systems I simply use: $ which commandname /a/commandname Or: $ type -a commandname commandname is aliased to `/b/commandname' commandname is /a/commandname commandname is /b/commandname And I am simply looking for the equivalent in the Windows Shell (specifically Win XP). I came to this general question, from a specific issue: I had installed robocopy.exe (version 026), but the command line "robocopy" always triggers version 010, and I would like to determine where this command points to, in order to correct this mistake.

  Read the article

• WebCenter News, Best Practices & Resources: Check Out the Latest Oracle WebCenter Newsletter

  - by Christie Flanagan

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Check out the latest edition of the Oracle Information InDepth Newsletter featuring the latest Oracle WebCenter news, best practices and resources. In this issue, you’ll find: Five best practices for application integration from Oracle expert, John Brunswick A video demonstrating how to employ the advanced segmentation and targeting features in Oracle WebCenter Sites The latest webcasts and events on how to engage your customers and empower your business with Oracle WebCenter Want to get the newsletter delivered directly to your inbox? Subscribe here.

  Read the article

• What permissions / ownership to set on PHP Sessions Folder when running FastCGI / PHP-FPM (as user "nobody")?

  - by Professor Frink

  I'm having trouble getting a number of scripts running because PHP-FPM can't write to my session folder: "2009/10/01 23:54:07 [error] 17830#0: *24 FastCGI sent in stderr: "PHP Warning: Unknown: open(/var/lib/php/session/sess_cskfq4godj4ka2a637i5lq41o5, O_RDWR) failed: Permission denied (13) in Unknown on line 0 PHP Warning: Unknown: Failed to write session data (files). Please verify that the current setting of session.save_path is correct (/var/lib/php/session) in Unknown on line 0" while reading upstream" Obviously this is a permission issue; my session folder's owner/group is the webserver's user, NGINX. PHP-FPM runs as nobody though, and hence adding it to the nginx group is not so trivial. A temporary solution is to set the permissions of /var/lib/php/session to 777 - I have a feeling that's not the "best practice" though. What is the best practice when you need to assign a daemon write access to a folder, but it is running as nobody ?

  Read the article

• .htaccess redirect - Is it secure?

  - by thecrandallster

  This works; I'm not having trouble, but I want to be certain that this is bulletproof. I came up with a neat little .htaccess redirect, but I am not sure if it is secure; do you know? <IfModule mod_rewrite.c     RewriteEngine On     RewriteRule ^goto/([a-z]+)/?$ /$1/ [R] </IfModule I think as long as the server is configured correctly and the files handle authentication autonomously, then it shouldn't be a security issue. Also, being that the rewrite rule only works with characters a-z and one slash I doubt they could jump around directories by injecting stuff into the URL I think...

  Read the article

• Monit can't detect MySQL, but I can

  - by Matchu

  Monit is configured to watch MySQL on localhost at port 3306. check process mysqld with pidfile /var/lib/mysql/li175-241.pid start program = "/etc/init.d/mysql start" stop program = "/etc/init.d/mysql stop" if failed port 3306 protocol mysql then restart if 5 restarts within 5 cycles then timeout My application, which is configured to connect to MySQL via localhost:3306, is running just fine and can access the database. I can even use MySQL Query Browser to connect to the database remotely via port 3306. The port is totally open and possible to connect to. Therefore, I'm pretty darn certain that it's running. However, running monit -v reveals that Monit cannot detect MySQL on that port. 'mysqld' failed, cannot open a connection to INET[localhost:3306] via TCP This happens consistently, until Monit decides not to track MySQL anymore, as configured. How can I begin to troubleshoot this issue?

  Read the article

• How do I allow end user 'blocked sender lists' to work even if the server manages spam filtering?

  - by Myrddin Emrys

  Client filtering in Outlook 2010 is disabled when the server is managing spam filtering. Unfortunately I have a few high profile users that prefer to spam-block mailing lists rather than unsubscribe, so even though the email is not really spam they are upset that it is coming into their mailbox. As seen here, I am not the first person to wrestle with this issue, and the suggested fix there (setting New-FseExtendedOption –Name CFAllowBlockedSenders –Value true) also failed to work for me. Can anyone provide another possible fix? Thank you kindly.

  Read the article

< Previous Page | 458 459 460 461 462 463 464 465 466 467 468 469  | Next Page >