Search Results

Search found 23890 results on 956 pages for 'issue'.

Page 466/956 | < Previous Page | 462 463 464 465 466 467 468 469 470 471 472 473  | Next Page >

• Volume size doesn't match Disk size after gparted expansion

  - by Cybersylum

  I just expanded a basic disk on a Windows XP VM from 15gb to 40 gb using GPARTED LiveCD (0.5.2-11). I didn't notice anything unusual during the expansion; but after I rebooted back into Windows, the disk capacity doesn't match the disk size as it should (only 1 volume on the disk). The disk shows as 40gb; but the C: volume still shows the original size. I've tried expanding the disk again with GPARTED (no change), and using VMware converter and have it adjust the size of the volume during the process (complains about a lack of space of snapshot error inside the os). The volume has 27% free space so I don't think it is a space issue. Chkdsk doesn't seem to find anything wrong either. The OS seems to run just fine, it doesn't see the additional space however. Any ideas?

  Read the article

• How can I prevent seams from showing up on objects using lower mipmap levels?

  - by Shivan Dragon

  Disclaimer: kindly right click on the images and open them separately so that they're at full size, as there are fine details which don't show up otherwise. Thank you. I made a simple Blender model, it's a cylinder with the top cap removed: I've exported the UVs: Then imported them into Photoshop, and painted the inner area in yellow and the outer area in red. I made sure I cover well the UV lines: I then save the image and load it as texture on the model in Blender. Actually, I just reload it as the image where the UVs are exported, and change the viewport view mode to textured. When I look at the mesh up-close, there's yellow everywhere, everything seems fine: However, if I start zooming out, I start seeing red (literally and metaphorically) where the texture edges are: And the more I zoom, the more I see it: Same thing happends in Unity, though the effect seems less pronounced. Up close is fine and yellow: Zoom out and you see red at the seams: Now, obviously, for this simple example a workaround is to spread the yellow well outside the UV margins, and its fine from all distances. However this is an issue when you try making a complex texture that should tile seamlessly at the edges. In this situation I either make a few lines of pixels overlap (in which case it looks bad from upclose and ok from far away), or I leave them seamless and then I have those seams when seeing it from far away. So my question is, is there something I'm missing, or some extra thing I must do to have my texture look seamless from all distances?

  Read the article

• Can non-IT people handle a wiki?

  - by Andrew Heath

  (I'm hoping that some of you will have encountered this issue before and can offer some insights...) My company is looking to improve their market research data management. Current data management style: "Hey Jimbo, where's that picture of our WhatZit 2.0? "yeah I remember that email about that company from that guy, gimme a few minutes to search my Outlook" "who has the newest copy of the Important Competitor's product catalogue? Mine is from '09." ... "Colleen does, and she's on maternity leave. You'll have to call her to get her workstation password..." Desired data management style: data organized neatly by topic (legal, economic, industrial, competitor) for each topic, multiple media types stored together (company product images, press releases, contact info) but still neatly sorted by type data editing histories communal access (no data silos) I was thinking about setting up a department wiki for all users to access. It seems to satisfy the four criteria above, but I'm a little concerned about how user-friendly (read: decipherable to non-technical people) it is for the more advanced features like image galleries, article formatting, and the like. Has anyone here setup a wiki for non-IT people and had it not catch on fire//become a ghost town//look like Geocities? Bonus question: can you see any obvious drawbacks to my choice of MediaWiki (or any other wiki) for solving this problem? Thank you.

  Read the article

• Tips for achieving "continual" delivery

  - by Ben

  A team is experiencing difficulty releasing software on a frequent basis (once every week). What follows is a typical release timeline: During the iteration: Developers work on stories on the backlog on short-lived (this is enthusiastically enforced) feature branches based on the master branch. Developers frequently pull their feature branches into the integration branch, which is continually built and tested (as far as the test coverage goes) automatically. The testers have the ability to auto-deploy integration to a staging environment and this occurs multiple times per week, enabling continual running of their test suites. Every Monday: there is a release planning meeting to determine which stories are "known good" (based on the testers' work), and hence will be in the release. If there is a known issue with a story, the source branch is pulled out of integration. no new code (only bug fixes requested by the testers) may be pulled into integration on this Monday to ensure the testers have a stable codebase to cut a release from. Every Tuesday: The testers have tested the integration branch as much as they possibly can have given the time available and there are no known bugs so a release is cut and pushed out to the production nodes slowly. This sounds OK in practise, but we have found that it is incredibly difficult to achieve. The team sees the following symptoms "subtle" bugs are found on production that were not identified on the staging environment. last minute hot-fixes continue into the Tuesday. problems on the production environment require roll-backs which blocks continued development until a successful live deployment is achieved and the master branch can be updated (and hence branched from). I think test coverage, code quality, ability to regression test quickly, last minute changes and environmental differences are at play here. Can anyone offer any advice regarding how best to achieve "continual" delivery?

  Read the article

• Is there an alternative to HTML Web Sockets, now that Firefox 4 has disabled them?

  - by Pino

  I've been checking out some of the latest multiplayer engines in HTML all supporting multi-user games (Very nice) - I believe all these engines use Web Sockets for communication. That’s why we’ve decided to disable support for WebSocket in Firefox 4, starting with beta 8 due to a protocol-level security issue. Beta 7 of Firefox has support for the -76 version of the protocol, the same version that’s included with Chrome and Safari. Beta 8 of Firefox 4 will remove that support. Anne van Kesteren of Opera also announced that Opera are dropping Websocket support. We are confident that other browser developers will follow. Source: Websockets Disabled in FireFox 4 I've just come accross the above, so no sockets in Firefox 4 or Opera.... thats big. Is anyone aware of an alternate or is it Chrome or do we need to just sit and wait for the next release of the major browsers. More info : Rocket Engine appears to work with all browsers including IE8 (http://rocketpack.fi/engine/) what will it be using as a method of communication?

  Read the article

• Possible to make mysql server both master and slave?

  - by Amy Anuszewski

  I am getting ready to move a database from one server to another. In order to reduce downtime for the client, I am wondering if it would be possible for me to turn on replication and give it time to replicate fully, then just point the customer to the new server. The issue I have is that the server I'm moving to has existing, active databases for other customers. And, the server I'm moving from has other active customers who will not be moving at this time. Is this even possible? If so, how do I configure the server I am moving from and the one I am moving to?

  Read the article

• Dreamweaver CS5 Test server works but cannot connect to host server through files window

  - by Toni

  I've been managing this site for a long time and update coupons on it approximately every 60 days. For some reason, I'm not having problems: I opened DW CS5 today and made the changes necessary to update coupons. I was able to connect to the host server with no problem but most of my coupon images were not showing up. DW tells me I have 70 broken links, which can't be the case because I've reviewed them. Some links work and are the same as the broken links other than the file name. Unable to figure it out, I thought maybe restarting my Mac would help. However, upon logging back into DW, I am now unable to connect to the host server. I get an FTP error notice that the file doesn't exist or there is a permissions problem. Funny thing is, I can connect successfully if I test the connection through the Site Management window. I have connected to my host server through FileZilla and see all the files there, unfortunately, I still can't get the web pages to display the coupons. Has anyone else had this issue and if so, what is the solution? I feel like this is probably a simple fix, but I cannot for the life of me determine what it is! If anyone knows a solution, I'd really appreciate the help! -Toni

  Read the article

• D-Link DWA-125 constantly disconnecting in winXP, but works fine on ubuntu..

  - by sil3nt

  Hey there, I'm dual booting winXp and ubuntu 10.10. I'm using a DWA-125 usb adapter to connect to my home wifi connection and I'm having this odd issue. First off, in ubuntu the adapter works fine and I have no trouble at all, but when I boot back in XP I get a dlink connetion wizard and the connection times out after every 2 minutes. It's odd because I can actually load up web pages and use the internet for 2 minutes, and then it would disconnect and the whole thing would repeat. I did a system restore on xp and this stopped the whole connect-disconnect thing but once I booted into ubuntu and came back to xp it started all over again!(?). Any ideas as to how I would go about fixing this?

  Read the article

• Script language native extensions - avoiding name collisions and cluttering others' namespace

  - by H2CO3

  I have developed a small scripting language and I've just started writing the very first native library bindings. This is practically the first time I'm writing a native extension to a script language, so I've run into a conceptual issue. I'd like to write glue code for popular libraries so that they can be used from this language, and because of the design of the engine I've written, this is achieved using an array of C structs describing the function name visible by the virtual machine, along with a function pointer. Thus, a native binding is really just a global array variable, and now I must obviously give it a (preferably good) name. In C, it's idiomatic to put one's own functions in a "namespace" by prepending a custom prefix to function names, as in myscript_parse_source() or myscript_run_bytecode(). The custom name shall ideally describe the name of the library which it is part of. Here arises the confusion. Let's say I'm writing a binding for libcURL. In this case, it seems reasonable to call my extension library curl_myscript_binding, like this: MYSCRIPT_API const MyScriptExtFunc curl_myscript_lib[10]; But now this collides with the curl namespace. (I have even thought about calling it curlmyscript_lib but unfortunately, libcURL does not exclusively use the curl_ prefix -- the public APIs contain macros like CURLCODE_* and CURLOPT_*, so I assume this would clutter the namespace as well.) Another option would be to declare it as myscript_curl_lib, but that's good only as long as I'm the only one who writes bindings (since I know what I am doing with my namespace). As soon as other contributors start to add their own native bindings, they now clutter the myscript namespace. (I've done some research, and it seems that for example the Perl cURL binding follows this pattern. Not sure what I should think about that...) So how do you suggest I name my variables? Are there any general guidelines that should be followed?

  Read the article

• Ubuntu 12.04 does not suspend with proprietary driver for Radeon 6800

  - by Mike

  I'm running Ubuntu 12.04 x86_64 (though these issues have existed in previous releases too) and have a Radeon 6800 graphics card. I've run into issues with the open-source driver (the system would randomly hang when shutting down) so I switched to the proprietary driver (I compiled it myself using these instructions), but I am having new problems now. The main issue is that when I go into sleep mode, about 50-75% of the time, the screen goes black but the monitor does not actually shut off, and I can hear that the fans/hard drive are not suspending either. I can't get the computer to wake up (Ctrl+Alt+F1,2,3,etc. does not work), and I always end up force shutting down with the power button. I'd really appreciate help! Here is some information that might be helpful: $ fglrxinfo display: :0 screen: 0 OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: AMD Radeon HD 6800 Series OpenGL version string: 4.2.11631 Compatibility Profile Context $ dmesg | grep fglrx [...] [ 6.718606] [fglrx] module loaded - fglrx 8.96.4 [Apr 5 2012] with 1 minors [...]

  Read the article

• Laptop hot after format

  - by Dany Khalife

  I recently formatted an HP G62 Laptop and installed all drivers from the HP site that should be installed for this model. But i noticed a very strange behavior, using Coretemp, the temp is always above 50 (on idle) and reaches 70 very quickly sometimes (Critical is 90) If i open youtube or skype alone, i can get temperatures as high as 83. Normally it was around 32 (on idle) and reaches 70 when i open games but not youtube.... I have a i3 processor and AMD graphics so i am wondering if somehow it's a graphics card issue (since i3 has integrated graphics as far as i know) Device manager shows only AMD graphics card tho, not sure if i3 graphics should appear here too. Any ideas what i might have forgotten to do after the format ?

  Read the article

• Laptop hot after format

  - by Dany Khalife

  I recently formatted an HP G62 Laptop and installed all drivers from the HP site that should be installed for this model. But i noticed a very strange behavior, using Coretemp, the temp is always above 50 (on idle) and reaches 70 very quickly sometimes (Critical is 90) If i open youtube or skype alone, i can get temperatures as high as 83. Normally it was around 32 (on idle) and reaches 70 when i open games but not youtube.... I have a i3 processor and AMD graphics so i am wondering if somehow it's a graphics card issue (since i3 has integrated graphics as far as i know) Device manager shows only AMD graphics card tho, not sure if i3 graphics should appear here too. Any ideas what i might have forgotten to do after the format ?

  Read the article

• Dell Alps Touchpad not working

  - by ppls

  I have a Dell 17R SE with Ubuntu 13.04. The touchpad is recognized as PS/2 mouse out of the box, giving just normal touchpad behaviour, but no tap to click, no scrolling, etc. Most answers related to that issue suggest trying an ALPS driver from dahetral.com: http://www.dahetral.com/public-download For installing I followed the steps on this page: https://www.linuxwind.org/html/dell-touchpad-driver-for-ubuntu-13-04.html Now my xinput looks like this: Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? PS/2 Mouse id=13 [slave pointer (2)] ? ? AlpsPS/2 ALPS GlidePoint id=14 [slave pointer (2)] ? ? Logitech Bluetooth Mouse M555b id=16 [slave pointer (2)] My touchpad isn't working at all now, just the two hardware buttons for left and right mouse buttons work. Interestingly also the tap to click functions works, but only in the address bar of nautilus, nowhere (!) else. What can I do? I would even switch back to initial state, where at least the basic touchpad functionality worked, i I knew, how to get there.

  Read the article

• AMD FX 8350 potentially overheating

  - by rhughes

  I am worried that my CPU is overheating when running at maximum capacity. I have not overclocked the machine. The machine often powers down after a couple of minutes of max CPU usage. I get the following events in the Event Log after the crash: Log Name: System Source: Microsoft-Windows-Kernel-Power Date: 11/10/2013 12:05:40 Event ID: 41 Task Category: (63) Level: Critical Keywords: (2) User: SYSTEM Computer: home-pc Description: The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly. What can I do to confirm this or further narrow down this issue? Due to the sudden nature of the crash, no MEMORY.DMP is created I believe. I am happy to post any extra information that is needed.

  Read the article

• After upgrading to 13.10, biblatex and biber are not compiling my references

  - by Lewelma

  I am working on a thesis using LaTeX, with my references relying on biblatex-apa. Ubuntu 13.04 provided all my LaTeX needs. But after upgrading to 13.10, the biblatex / biber combo will no longer compile my APA-style references. No other changes have been made to my documents or references -- and the rest of the document appears fine (albeit with broken references and no bibliography). I found reference to a possible cause -- which is that biblatex 1.7-1 is incompatible with texlive 2013 (as available through the 13.10 repositories) -- and that issue may be fixed by biblatex 2.7a-1 which has been committed upsteam in Debian. See: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=718244 However, that doesn't help me much, as I need to compile my references quite soon. How can I get my references to compile in the meantime? Is there a patched biblatex or biber that I can manually slot in place? Is the upstream fix on its way? or do I need to go to TexLive and do a replacement install directly (which is not my preference). Thanks!

  Read the article

• php rsync with exec() not working

  - by mojeime

  Why this: rsync -avz -e ssh /home/userneme/folder [email protected]:/var/www/folder works from cronjob and this: exec("rsync -avz -e ssh /home/userneme/folder [email protected]:/var/www/folder"); doesn't work. I know exec is working because i have a few places in my appp that do convercion from pdf to jpg with ImageMagick (exec). SOLVED exec is working OK it was a permission issue on remote server. "Local" server is shared reseller account and remote server is my first VPS Ubuntu 10.10 LAMP box. If only I had a system administrator since i'm just a software developer forced to do this and i stink at it :) Thank You all!

  Read the article

• Upgrading specific pieces of KDE 4.x

  - by Blind Fish

  So this is going to be one of those "is this even possible?" questions. I need to upgrade a piece of my KDE from 4.8.5 to 4.9. Specifically, I need to upgrade Gwenview from the 2.85 version in KDE 4.8.5 to 2.9 version in KDE 4.9. It seems trivial but it's actually a fairly big deal for me. I recently upgraded my Ubuntu to 12.04, and that upgraded my Gwenview to 2.8x. The issue is that the Gwenview 2.8 releases accidentally broke a feature that I rely upon very heavily. It's a known bug that was corrected in 2.9. Unfortunately, the only package available in Synaptic is 4.8.5, which contains Gwenview 2.85. To make matters worse I'm not sure that I can simply take my whole KDE to 4.9 as I am running an older Toshiba Satellite with the Intel 945GMA chipset that I was shocked managed to hold up under the weight of 12.04 as it is. Well, actually it didn't. I had to install Cairo Dock as Unity 2D was hopeless with this chipset. But anyway, I desperately need to get to Gwenview 2.9 without the potential system-wide implosion of upgrading KDE to 4.9. Possible?

  Read the article

• Exchange Server 2010 ActiveSync SSL Certificate Problem

  - by Cell-o

  Hi All, We have a problem related Exchange Server 2010 Activesync.My problem is;When I connecting to activesync from outside, I am receiving the following error. ExRCA is testing Exchange ActiveSync. The Exchange ActiveSync test failed. Test Steps Attempting to resolve the host name mail.xxxxx.com in DNS. The host name resolved successfully. Additional Details IP addresses returned: xx.0.x3.4 Testing TCP port 443 on host mail.x.com to ensure it's listening and open. The port was opened successfully. Testing the SSL certificate to make sure it's valid. The SSL certificate failed one or more certificate validation checks. Test Steps Validating the certificate name. Certificate name validation failed. Tell me more about this issue and how to resolve it Additional Details Host name mail.x.com doesn't match any name found on the server certificate CN=xxxxxx. Thanks in advance all your help.

  Read the article

• Yoga Pro 2 Wi-Fi not working

  - by user293004

  I installed Ubuntu 14.04 on my new Yoga Pro 2 and the wireless is not working. It started with Windows 8 on it. The Network Manager says Wi-Fi is disabled by hardware switch. I tried putting a blacklist file in ect/modprobe.d as has been suggested in many places. I called the file "blacklist-ideapad_laptop.conf" and wrote in the file blacklist ideapad_laptop I checked to make sure that the wireless is enabled in the BIOS. It is. I ran rfkill list all and it displayed: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: yes I ran iwlist wlan0 scan and it displayed: wlan0 Failed to read scan data : Network is down I ran sudo rmmod ideapad_laptop and it displayed: rmmod: ERROR: Module ideapad_laptop is not currently loaded. I ran ifconfig wlp1s0 up and it displayed: wlp1s0: ERROR while getting interface flags: No such device. I ran "lspci" and it displayed: 01:00.0 Network controller: Intel Corporation Wireless 7260 (rev 6b) I ran sudo lshw -c network and it displayed: *-network DISABLED description: Wireless interface product: Wireless 7260 vendor: Intel Corporation physical id: 0<br> bus info: pci@0000:01:00:0.0 logical name: wlan0 version: 6b serial: 7c:7a:91:5f:9b:fa width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.13.0-24-generic firmware=22.24.8.0 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:61 memory:b0400000-b0401fff This No wireless with Intel Centrino Advanced-N 7260 seems to be dealing with a similar issue. It suggests that I need to update my firmware. So I downloaded iwlwifi-7260-ucode-23.214.9.0 from Intel's website. I put the file "iwlwifi-7260-9.ucode" in /lib/firmware and ran "sudo lshw -c network" again. It displayed exactly as before. Is there something else I need to do install the new firmware?

  Read the article

• Wordpress blog website apache and IIS subdirectory

  - by Philippe

  The issue is this : Our company has a website hosted on an IIS server. I have recently been given the task to configure a WordPress server for an eventual WordPress blog so that our social media employee could test and see how it works. This was completed successfully and easily on a new server and on a WAMP configuration. The website was published as wordpress.domain.com and works fine. HOWEVER! I have now been requested to ensure that the soon-to-go-online blog would be accessible through the address domain.com/blog. Is there a way to modify the original company website and simple redirect the /blog to the Apache WordPress website? If not, is there a way to transfer the wordpress.domain.com on the IIS server hosting the main website and keep the configuration? Is there a better solution that I haven't thought about (probably)? If so, what would you all suggest?

  Read the article

• Apache ProxyPass ignore static files

  - by virtualeyes

  Having an issue with Apache front server connecting to a Jetty application server. I thought that ProxyPass ! in a location block was supposed to NOT pass on processing to the application server, but for some reason that is not happening in my case, Jetty shows a 404 on the missing statics (js, css, etc.) Here's my Apache (v 2.4, BTW) virtual host block: DocumentRoot /path/to/foo ServerName foo.com ServerAdmin [email protected] RewriteEngine On <Directory /path/to/foo> AllowOverride None Require all granted </Directory> ProxyRequests Off ProxyVia Off ProxyPreserveHost On <Proxy *> AddDefaultCharset off Order deny,allow Allow from all </Proxy> # don't pass through requests for statics (image,js,css, etc.) <Location /static/> ProxyPass ! </Location> <Location /> ProxyPass http://localhost:8081/ ProxyPassReverse http://localhost:8081/ SetEnv proxy-sendchunks 1 </Location>

  Read the article

• custom adm file for IE search providers on Windows 2003

  - by filipv

  Hi, I have been stumped by this issue for some time, I created a custom ADM template for a customer to populate the search providers in Internet Explorer 7 and 8. The custom ADM works fine and I have set 3 search providers, the problem is that I cannot change them (the customer wants to change the entry for wikipedia from EN to NL), I edited the ADM file but the clients seem to keep on using the old settings. Removing/replacing the adm file has no effect either, the settings remain. I used the following article as a base: http://support.microsoft.com/kb/918238 For IE8 you need to work with a name instead of a UID for the default entry, that works as expected. but there seems to be no way to change the setting once in place.

  Read the article

• Xenserver boot error

  - by Adrian

  I'm trying to get Xenserver 5.5 running on a spare computer here, hardware specs: Intel Q6600, 4GB Ram, and Gigabyte GA-P35-DS3R motherboard Xenserver itself installs fine onto a 150GB sata hdd, however it fails to boot whatsoever, giving this garbled mess: http://img697.imageshack.us/img697/9918/biosi.jpg it's not frozen because if I press enter it just prints a different garble and it also says "could not find kernel image". The strangest thing is if I put that hdd in my desktop and assign it to a VMWare desktop vm (under the ESX profile no less) it boots perfectly... leading me to believe there are no problems with the install or the hdd itself. From what I can tell the error seems to be occuring completely seperately to Xenserver, in the bootloader extlinux?. If there was a motherboard compatibility issue I would think it would also have manifested during installation, and the fact the problem seems to be with the booting into Xen makes me doubt this. Any ideas guys? (I'm using Xen because it can do PCI passthrough without VT-d.)

  Read the article

• Can I change the image associated with my computer when it's sharing as a media server?

  - by animuson

  I currently have my computer setup to share its videos, music, and pictures as a media server so I can easily access all of my stuff from my PS3 and play it on my TV (since I can't connect my computer directly to my TV). However, my dad also has his laptop setup as a media server, for whatever reason, and both of them use the same "Windows Media Player" icon in the list. It's not a huge issue, but I was wondering if it was possible to somehow change what icon gets sent out by your computer to other devices when it's acting as a media server, and how?

  Read the article

• NIC disabled in AWS instance

  - by Elad Lachmi

  Nothing makes you feel dumber than disabling a NIC while in RDP, but here I am :) I have mounted the volume on another instance and tried editing the registry. I have tried enabling auto logon and using runonce to run a netsh command to enable the NIC, but that does not work. I read something about enabling the NIC through the registry directly, but have had no luck in doing this. Has anyone dealt with this type of issue? I'm going nuts! Thank you!

  Read the article

< Previous Page | 462 463 464 465 466 467 468 469 470 471 472 473  | Next Page >