Search Results

Search found 20188 results on 808 pages for 'wireless network'.

Page 466/808 | < Previous Page | 462 463 464 465 466 467 468 469 470 471 472 473  | Next Page >

• Create access point (uap0) on debian 7(arm) - not found?

  - by ethrbunny

  I'm working with a fanless PC that has an ARM chipset, 2 eth plugs and a wifi card (among other things). If I install debian 6 on it all three network interfaces are available at boot time. Today I tried to install debian 7 and had numerous errors indicating that the wireless card isn't supported. uap0: error fetching interface information: Device not found SIOCSIFADDR: No such device uap0: ERROR while getting interface flags: No such device uap0: ERROR while getting interface flags: No such device No such device ERR:UAPHOSTCMD is not supported by uap0 ERR:Command sending failed! No such device ERR:UAPHOSTCMD is not supported by uap0 ERR:Command sending failed! I've tried comparing the kernel module list to the working system but there are too many other differences to make something obvious enough (to me) stand out. How would I get started debugging this problem?

  Read the article

• Why does WMI Provider Host ( WmiPrvSE.exe ) keep spiking my CPU ?

  - by Sathya

  I generally keep my laptop on 24x7, and at the end of the day it's really annoying to have my thighs burnt because over overheating. The overheating seems to be a result of WMI Provider Host ( WmiPrvSE.exe ) spiking the CPU utilization to 25% every few minutes. Any ideas why this is happening ? I have an HP Envy 14 (w/ the HP bundled crap) running on Windows 7 Home Premium. (Note: Based on @nhinkle's past observations, it seems that HP Wireless Manager might be the culprit, is there any way to confirm this ?)

  Read the article

• Which tools to use and how to find file descriptors leaking from Glassfish?

  - by cclark

  We release new code to production every week and Glassfish hasn't had any problems. This weekend we had to move racks at our hosting provider. There were not any code changes (they just powered off, moved, re-racked and powered on) but we're on a new network infrastructure and suddenly we're leaking file descriptors like a sieve. So I'm guessing there is some sort of connection attempting to be made which now fails due to a network change. I'm running Glassfish v2ur2-b04/AS9.1_02 on RHEL4 with an embedded IMQ instance. After the move I started seeing: [#|2010-04-25T05:34:02.783+0000|SEVERE|sun-appserver9.1|javax.enterprise.system.container.web|_ThreadID=33;_ThreadName=SelectorThread-?4848;_RequestID=c4de6f6d-c1d6-416d-ac6e-49750b1a36ff;|WEB0756: Caught exception during HTTP processing. java.io.IOException: Too many open files at sun.nio.ch.ServerSocketChannelImpl.accept0(Native Method) ... [#|2010-04-25T05:34:03.327+0000|WARNING|sun-appserver9.1|javax.enterprise.system.stream.err|_ThreadID=34;_ThreadName=Timer-1;_RequestID=d27e1b94-d359-4d90-a6e3-c7ec49a0f383;|java.lang.NullPointerException at com.sun.jbi.management.system.AutoAdminTask.pollAutoDirectory(AutoAdminTask.java:1031) Using lsof I check the number of file descriptors and I see quite a few entries which look like: java 18510 root 8556u sock 0,4 1555182 can't identify protocol java 18510 root 8557u sock 0,4 1555320 can't identify protocol java 18510 root 8558u sock 0,4 1555736 can't identify protocol java 18510 root 8559u sock 0,4 1555883 can't identify protocol If I do a count of open file descriptors every minute I see it growing by 12 every minute. I have no idea what these sockets are. I've undeployed my application so there is only a plain Glassfish instance running and I still see it leaking 12 file descriptors a minute. So I think this leak is in Glassfish or potentially IMQ. What approach should I take to tracking down these sockets of unknown protocol? What tools can I use (or flags can I pass to lsof) to get more information about where to look? thanks, chuck

  Read the article

• Designing DAOs around a JSON API for iPhone Development

  - by Bob Spryn

  So I've been trying to design a clean way of grabbing data for my models in iPhone land. All the data for my application is coming from JSON API's. So right now when a VC needs some models, it does the JSON call itself (asynch) and when it receives the data, it builds the models. It works, but I'm trying to think of a cleaner method whereby the DAO's retrieve the information for me and return the models, all in an async manner. My initial thought is build a protocol for my DAOs, such that the VC would instantiate a DAO and make itself the delegate. When you requested data [DAOinstance getAllUsers] the DAO would do all the network request stuff, and then when it had the data, it would call a method on its delegate (the VC) to pass the data. So I think that's a cool solution, but realized that if I needed to use the same DAO for different purposes in the same VC, my delegate method would have to branch logic depending on which DAO instance initiated the request. So my second thought was to be able to pass 'handler' selectors to the DAO object a la typical javascript patterns. So instead of an official protocol, I would say something like [DAOinstance getAllUsersWithSelector:"TheHandlerFunctionOnMyVC:"] Then when the DAO completed its network activities, it would call the passed selector on the VC, and pass the data back. So am I headed in the wrong direction entirely here? Seems like maybe an ok way to go. Any pointers or articles on designing this kind of data layer would be sweet. Thanks! Bob

  Read the article

• Linux Bridge, Samba netbios name/hostname access

  - by Christopher Wilson

  I am currently running a linux bridge in the following configuration ADSL Modem: 192.168.1.1 Linux Bridge: eth0: 192.168.1.2 eth1: no address Wireless Router: 192.168.0.1 My issue is that i cannot access the "Linux Bridge" shares using the WINS name of the server via client systems (yes i understand it is a transparent bridge but i can access it via the 192.168.1.2 address this is not on the same subnet as the client systems). This is the global section of my SMB.CONF [global] unix extensions = off os level = 20 netbios name = server guest account = nobody server string = 447 Server security = share #unix extensions = no #wins support = yes #wins server = 192.168.0.1 name resolve order = wins lmhosts hosts bcast interfaces bridge1 eth0 eth1 lo bind interfaces only = yes Can i access a bridged server using it's WINS name to access samba shares? Cheers Chris

  Read the article

• How to write custom (odd) authentication plugins for Wordpress, Joomla and MediaWiki?

  - by Bart van Heukelom

  On our network (a group of related websites - not a LAN) we have a common authentication system which works like this: On a network site ("consumer") the user clicks on a login link This redirects the user to a login page on our auth system ("RAS"). Upon successful login the user is directed back to the consumer site. Extra data is passed in the query string. This extra data does not include any information about the user yet. The consumer site's backend contacts RAS, with this extra data, to get the information about the logged in user (id, name, email, preferences, etc.). So as you can see, the consumer site knows nothing about the authentication method. It doesn't know if it's by username/password, fingerprint, smartcard, or winning a game of poker. This is the main problem I'm encountering when trying to find out how I could write custom authentication plugins for these packages, acting as consumer sites: Wordpress Joomla MediaWiki For example Joomla offers a pretty simple auth plugin system, but it depends on a username/password entered on the Joomla site. Any hints on where to start?

  Read the article

• Problem in accessing Windows shared folder on Ubuntu using terminal

  - by vikramtheone

  Hi Guys, Description I have 2 systems with me, one running on Windows(Host) and one on Ubuntu, both on a LAN. On the Windows(Host) I develop software intended for the Linux system and because the Linux system has little external memory, my idea to overcome this is by making the project folder on the Host side a Shared Folder with full access and access it on Ubuntu over the network. To achieve this, I have installed Samba on Ubuntu, when I go to Places -> Network I can see the shared project folder and I simply mount it. A link appears on the desktop. Next, using Nautilus I open the link and I can access the contents of the shared folder. Problem Even though I mount the shared project folder, I don't see it appearing in the /media or the /mnt folder, as a result of this I don't know what path to use to access this folder, from the terminal. For example: When, I mounted my USB stick, as expected, a link for the device appears on the Desktop and I also see a folder in the media folder. So, similarly, a mounted shared folder should have appeared on the /mnt folder, too. Can anyone suggest what I should do now? There are many posts around, but no solid solution for this problem. Help!!! :) Vikram

  Read the article

• How to use my computer to control a lamp?

  - by nona urbiz

  I've been researching computer automation systems, but everything I've found has been overkill for what I'm interested in. Can anyone help me control a lamp that is on my desk, plugged in the wall beneath the desk, with my computer (also on the desk, usually). What got me thinking is that I have the lamp plugged into a Belkin extension cord/surge protector that came with a wireless switch that toggles the power going to 6 of the eight sockets. Can I somehow hook my computer into this? I'm not too afraid to get into some wiring type thing, but do have a somewhat limited budget. It'd also be cool to get a dimmer in the loop too. thanks aha. after more research, i have realized what i'm looking for is instructions for a DIY version of this that won't look so ugly, and that i can build a UI for rather than shortcuts.

  Read the article

• Can't ping self

  - by Paddy

  I have a wireless internet connection setup on my Mac. (v10.5.6) Am connected to the internet and everything is running smoothly. I recently discovered a quirky behaviour while setting up apache web server. When i typed in my dynamic ip (http://117.254.149.11/) in the webbrowser to visit my site pages it just timed out. In terminal i tried pinging localhost and it worked. $ ping localhost PING localhost (127.0.0.1): 56 data bytes 64 bytes from 127.0.0.1: icmp_seq=0 ttl=64 time=0.063 ms 64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.056 ms 64 bytes from 127.0.0.1: icmp_seq=2 ttl=64 time=0.044 ms But if i pinged my ip it would just time out. $ ping 117.254.149.11 PING 117.254.149.11 (117.254.149.11): 56 data bytes ^C --- 117.254.149.11 ping statistics --- 10 packets transmitted, 0 packets received, 100% packet loss Pinging any other site works though. I am completely stumped. Any help would be greatly appreciated.

  Read the article

• Is my method for avoiding dynamic_cast<> faster than dynamic_cast<> itself ?

  - by ereOn

  Hi, I was answering a question a few minutes ago and it raised to me another one: In one of my projects, I do some network message parsing. The messages are in the form of: [1 byte message type][2 bytes payload length][x bytes payload] The format and content of the payload are determined by the message type. I have a class hierarchy, based on a common class Message. To instanciate my messages, i have a static parsing method which gives back a Message* depending on the message type byte. Something like: Message* parse(const char* frame) { // This is sample code, in real life I obviously check that the buffer // is not NULL, and the size, and so on. switch(frame[0]) { case 0x01: return new FooMessage(); case 0x02: return new BarMessage(); } // Throw an exception here because the mesage type is unknown. } I sometimes need to access the methods of the subclasses. Since my network message handling must be fast, I decived to avoid dynamic_cast<> and I added a method to the base Message class that gives back the message type. Depending on this return value, I use a static_cast<> to the right child type instead. I did this mainly because I was told once that dynamic_cast<> was slow. However, I don't know exactly what it really does and how slow it is, thus, my method might be as just as slow (or slower) but far more complicated. What do you guys think of this design ? Is it common ? Is it really faster than using dynamic_cast<> ? Any detailed explanation of what happen under the hood when one use dynamic_cast<> is welcome !

  Read the article

• Seasgate GoFlex NAS + Horrible Speed = Bad Experience

  - by Jon H

  I am having issues with transfer speeds from my desktop PC to my NAS. I have my NAS hooked up to a Gigabit Gateway as well as my Desktop with Cat 5e. I see up to 4.0 MB/Second Transfer Rates, the normal is about 2.5 MB/Seconds. There is 3 Partitions on my NAS, Public, Private, Backup. When I transfer from Private to Public I see the speeds above. If its under the same partition almost instant. I was wondering if the speeds I am seeing is in due to my Computer or the NAS. I was looking into building my own Media Server in due to these horrible speeds. Is their anything I can do in the mean time to speed this up? Motherboard = M3970AM-HP (Angelica) Processor = AMD FX 6100 Ram = 10GB PC3-10600 MB/sec Hard Drive (1) = 1.5TB SATA 3.0GB 5400RPM Hard Drive (2) = 120GB SATA SSD NAS = Seagate 3TB Go Flex Home Connection (1) = 1000 Base T Connection (2) = Wireless N

  Read the article

• Disabling networkmanager for a specific interface

  - by bdonlan

  I'd like to do some experimentation with hostap without disabling my primary wireless interface. How do I tell networkmanager to keep its hands off a specific interface or interfaces while allowing it to continue managing all other interfaces normally? I'm using Ubuntu 9.04. (Wasn't sure if this should go on superuser or serverfault, as networkmanager isn't much of a 'server' tool - if it belongs on serverfault please feel free to move it) Edit: I've tried adding this to /etc/network/interfaces: allow-hotplug wlan2 iface wlan2 inet static address 192.168.49.1 netmask 255.255.255.0 But this has no apparent effect, even after restarting NetworkManager. Here's my /etc/NetworkManager/nm-system-settings.conf: [main] plugins=ifupdown,keyfile [ifupdown] managed=false Edit[2]: Looks like I needed to restart nm-system-settings, then NetworkManager.

  Read the article

• New entries on the GRUB

  - by Kiewic

  Hello. I updated my Ubuntu, and after that there were two new lines on my GRUB screen. Ubuntu 9.04, kernel 2.6.28-16-generic Ubuntu 9.04, kernel 2.6.28-16-generic (recovery mode) Ubuntu 9.04, kernel 2.6.28-11-generic Ubuntu 9.04, kernel 2.6.28-11-generic (recovey mode) Ubuntu 9.04, memtest86+ Other operating systems: Microsoft Windows XP Home Edition Do I have two kernels installed? Do the old entries are still useful? Each kernel takes up space? :P And that's not all, when a get into the old version of Ubuntu, the wireless card stops working on any Ubuntu version until I get into Windows and then go back to Ubuntu. Thanks for your help.

  Read the article

• How does a client find the port number of a server?

  - by Jonathan

  Hello all, I am currently learning about basic networking in java. I have been playing around with the server and client relationship between two of my computers. However, I cannot figure out how distributed programs (say, a videogame), can not only find the 'host' computer, but also the port number on which the server is running in order to create a Socket between the two computers. The only way I really see to create a Socket is with an already known IP Address, and with a known port number. How do you search a LAN network for another computer (host) searching for clients? How do you determine what port the server is located on without 'pinging' all available ports for a response (which, I understand, is bad form... Something about 'server attack'...)? In such a situation as a video game, there can be any number of computers on the same network, and any number of them might be attempting to host, or otherwise running the application. Any other important information, or perhaps reference to a more detailed tutorial than the one I am using, regarding making connections on so very little information on the client side would be appreciated. Many thanks, Jonathan

  Read the article

• trouble with internet connection - slow to open web pages if they open at all until I put VPN on and then they open ok

  - by Caroline Coleman

  I am having problems with my internet connection. At the moment I am on a mac and connected through a netgear wireless router. The internet connection either won't open a webpage at all or if it does it takes ages. However if I turn my VPN on the pages open at a normal speed. Also skype functions OK and I seem to be able to download files ok. I have tried connecting with a wire between the router and the computer and it makes no difference.

  Read the article

• 64-bit Alternative for Microsoft Jet

  - by David Robison

  Microsoft has chosen to not release a 64-bit version of Jet, their database driver for Access. Does anyone know of a good alternative? Here are the specific features that Jet supports that I need: Multiple users can connect to database over a network. Users can use Windows Explorer to copy the database while it is open without risking corruption. Access currently does this with enough reliability for what my customers need. Works well in C++ without requiring .Net. Alternatives I've considered that I do not think could work (though my understanding could be incorrect): SQLite: If multiple users connect to the database over a network, it will become corrupted. Firebird: Copying a database that is in use can corrupt the original database. SQL Server: Files in use are locked and cannot be copied. VistaDB: This appears to be .Net specific. Compile in 32-bit and use WOW64: There is another dependency that requires us to compile in 64-bit, even though we don't use any 64-bit functionality.

  Read the article

• How to receive Email in JEE application

  - by Hank

  Obviously it's not so difficult to send out emails from a JEE application via JavaMail. What I am interested in is the best pattern to receive emails (notification bounces, mostly)? I am not interested in IMAP/POP3-based approaches (polling the inbox) - my application shall react to inbound emails. One approach I could think of would be Keep existing MTA (postfix on linux in my case) - ops team already knows how to configure / operate it For every mail that arrives, spawn a Java app that receives the data and sends it off via JMS. I could do this via an entry in /etc/aliases like myuser: "|/path/to/javahelper" with javahelper calling the Java app, passing STDIN along. MDB (part of JEE application) receives JMS message, parses it, detects bounce message and acts accordingly. Another approach could be Open a listening network socket on port 25 on the JEE application container. Associate a SessionBean with the socket. Bean is part of JEE application and can parse/detect bounces/handle the messages directly. Keep existing MTA as inbound relay, do all its security/spam filtering, but forward emails to myuser (that pass the filter) to the JEE application container, port 25. The first approach I have done before (albeit in a different language/setup). From a performance and (perceived) cleanliness point of view, I think the second approach is better, but it would require me to provide a proper SMTP transport implementation. Also, I don't know if it's at all possible to connect a network socket with a bean... What is your recommendation? Do you have details about the second approach?

  Read the article

• Recommending simple appliance for DansGuardian, iptables, snort inline

  - by SRobertJames

  I'm currently using a Linksys E2000 with dd-wrt. I'd like to add DansGuardian for Content Filtering and snort-inline for IPS; but those require a more powerful box (mainly, more storage). Can you recommend a good device to use? I'm open to both overwrite-the-firmware (like dd-wrt) and designed-to-be-customized boxes. Requirements: 1. 5+ Ethernet ports, pref. GigE 2. small form factor 3. No noise (office environment) 4. low power 5. Not sure about 802.11 wireless Budget < $400, pref. less.

  Read the article

• 2wire modem to linksys router

  - by Imajica666

  I want to hook a Linksys router to my 2wire modem/router (2701HG-b) to share my Internet connection. I ran from an open port from the 2wire to the WAN port of the Linksys but it will not work. I did this before with my cable modem to a router to my Linksys router. It worked then but not now. I read I can turn the 2 wire into a modem only but I need the 2wire wireless access also. IPCONFIG /ALL sees the 2wire with IP info as well as DHCP server/gateway. Any ideas?

  Read the article

• Accessing Windows from Linux/Mac by name using TCP/IP

  - by stevekuo

  What are some solutions to access Windows by its computer name from Linux and Mac using TCP/IP. That is, from terminal I want to be able to ping my Windows PCs using its host name. My setup is: Various machines running Ubuntu, Windows XP and OS X. Networked using a consumer grade wireless router which provides DHCP. The only DNS is the ISP's, which resolves Internet names and not local host names. The Windows machines can ping each other by name. The Ubuntu and OS X machines can only ping Windows by IP address (name doesn't work).

  Read the article

• How can i get rid of 'ORA-01489: result of string concatenation is too long' in this query?

  - by core_pro

  this query gets the dominating sets in a network. so for example given a network A<----->B B<----->C B<----->D C<----->E D<----->C D<----->E F<----->E it returns B,E B,F A,E but it doesn't work for large data because i'm using string methods in my result. i have been trying to remove the string methods and return a view or something but to no avail With t as (select 'A' as per1, 'B' as per2 from dual union all select 'B','C' from dual union all select 'B','D' from dual union all select 'C','B' from dual union all select 'C','E' from dual union all select 'D','C' from dual union all select 'D','E' from dual union all select 'E','C' from dual union all select 'E','D' from dual union all select 'F','E' from dual) ,t2 as (select distinct least(per1, per2) as per1, greatest(per1, per2) as per2 from t union select distinct greatest(per1, per2) as per1, least(per1, per2) as per1 from t) ,t3 as (select per1, per2, row_number() over (partition by per1 order by per2) as rn from t2) ,people as (select per, row_number() over (order by per) rn from (select distinct per1 as per from t union select distinct per2 from t) ) ,comb as (select sys_connect_by_path(per,',')||',' as p from people connect by rn > prior rn ) ,find as (select p, per2, count(*) over (partition by p) as cnt from ( select distinct comb.p, t3.per2 from comb, t3 where instr(comb.p, ','||t3.per1||',') > 0 or instr(comb.p, ','||t3.per2||',') > 0 ) ) ,rnk as (select p, rank() over (order by length(p)) as rnk from find where cnt = (select count(*) from people) order by rnk ) select distinct trim(',' from p) as p from rnk where rnk.rnk = 1`

  Read the article

• Upload using python script takes very long on one laptop as compared to another

  - by Engr Am

  I have a python 2.7 code which uses STORBINARY function for uploading files to an ftp server and RETRBINARY for downloading from this server. However, the issue is the upload is taking a very long time on three laptops from different brands as compared to a Dell laptop. The strange part is when I manually upload any file, it takes the same time on all the systems. The manual upload rate and upload rate with the python script is the same on the Dell Laptop. However, on every other brand of laptop (I have tried with IBM, Toshiba, Fujitsu-Siemens) the python script has a very low upload rate than the manual attempt. Also, on all these other laptops, the upload rate using the python script is the same (1Mbit/s) while the manual upload rate is approx. 8 Mbit/s. I have tried to vary the filesize for the upload to no avail. TCP Optimizer improved the download rate on all the systems but had no effect on the upload rate. Download rate using this script on all the systems is fine and same as the manual download rate. I have checked the server and it has more than 90% free space. The network connection is the same for all the laptops, and I try uploading only with one laptop at a time. All the laptops have almost the same system configurations, same operating system and approximately the same free drive space. If anything the Dell laptop is a little less in terms of processing power and RAM than 2 of the others, but I suppose this has no effect as I have checked many times to see how much was the CPU usage and network usage during these uploads and downloads, and I am sure that no other virus or program has been eating up my bandwidth. Here is the code ('ftp' and 'file_path' are inputs to the function): path,filename=os.path.split(file_path) filesize=os.path.getsize(file_path) deffilesize=(filesize/1024)/1024 f = open(file_path, "rb") upstart = time.clock() print ftp.storbinary("STOR "+filename, f) upende = time.clock()-upstart outname="Upload " f.close() return upende, deffilesize, outname

  Read the article

• What is the type/classification/term for an PC headset that does not go over the head or back of the

  - by FMFF

  How do I search in the leading auction site for the PC headset(earpiece + microphone) that does not have a band to go around or over your head - instead it is entirely like a cable, with the microphone attached in one of the wires leading from the ear piece? How is it called? I'm not talking about Bluetooth wireless headsets. I have one from Plantronics I got years ago, which they stopped making and I want another one, but don't know how to search. Simply searching for HeadSet or similar terms, brings mostly the newer ones which I don't want. Thank you.

  Read the article

• Server problem (duh)

  - by j-t-s

  Sorry the title couldn't be more specific. I installed Abyss Web Server. I'm running Windows XP Home Edition and I have Wireless Mobile Broadband internet. I used to be able to access (and other people on other networks) my site by entering my ip address in the browser, but after I formatted, and the installed abyss web server again, this does not work anymore. There are no errors. I CAN visit my own site by entering my ip address BUT anybody else can't do the same, it just says "connecting" in the browser's statusbar and it never changes. I have consulted the docs and have found no help. Google hasn't helped with this problem either. Can somebody please help? Thank you :)

  Read the article

• Server problem (duh)

  - by j-t-s

  Sorry the title couldn't be more specific. I installed Abyss Web Server. I'm running Windows XP Home Edition and I have Wireless Mobile Broadband internet. I used to be able to access (and other people on other networks) my site by entering my ip address in the browser, but after I formatted, and the installed abyss web server again, this does not work anymore. There are no errors. I CAN visit my own site by entering my ip address BUT anybody else can't do the same, it just says "connecting" in the browser's statusbar and it never changes. I have consulted the docs and have found no help. Google hasn't helped with this problem either. Can somebody please help? Thank you :)

  Read the article

< Previous Page | 462 463 464 465 466 467 468 469 470 471 472 473  | Next Page >