Search Results

Search found 11395 results on 456 pages for 'intel integrated graphics'.

Page 47/456 | < Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >

• How to install missing Sound Drivers in Ubuntu?

  - by Sakamoto Kazuma

  I seem to be missing drivers for my Gateway laptop MA7. I have looked in System-Admin-Hardware Drivers, but it does not show up in there.There are also no devices listed in Sound-Hardware. I'm guessing at this point that I don't have the driver installed. However, I get the following output: admin@machine001:~$ cat /proc/asound/cards 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xd8240000 irq 22 admin@machine001:~$ And my lspci shows: 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02) 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8038 PCI-E Fast Ethernet Controller (rev 14) 03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02) 04:09.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller 04:09.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller 04:09.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) I have also checked alsamixer, and nothing is muted. No headphones plugged into headphone jack either. So the question now is, how do I get sound to work on my laptop? It doesn't work for any application.

  Read the article

• Can not get sound over hdmi in kubuntu 9.10

  - by user32509

  I have used a hdmi cable to connect my lcd (which is connected with my speakers) with my nvida 275 gtx grafic card. I can not get the sound output to work. The hardware itself is working probably - I tested it under windows. Currently I am running Kubuntu 9.10 64 with Nvidia 190.53. The sound output worked fine before I installed the hdmi connection. (German output - i can change it, if you tell me how :)) aplay -l **** Liste von PLAYBACK Geräten **** Karte 0: Intel [HDA Intel], Gerät 0: ALC889A Analog [ALC889A Analog] Untergeordnete Geräte: 1/1 Untergeordnetes Gerät '0: subdevice #0 Karte 0: Intel [HDA Intel], Gerät 1: ALC889A Digital [ALC889A Digital] Untergeordnete Geräte: 1/1 Untergeordnetes Gerät '0: subdevice #0 aplay -L front:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog Front speakers surround40:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=Intel,DEV=0 HDA Intel, ALC889A Digital IEC958 (S/PDIF) Digital Audio Output null Discard all samples (playback) or generate zero samples (capture) pulse Playback/recording through the PulseAudio sound server And i disabled mute in kmix an all channels :) Edit: lspci -v ... 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) Subsystem: Giga-byte Technology Device a022 Flags: bus master, fast devsel, latency 0, IRQ 22 Memory at ea400000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel <?> Capabilities: [130] Root Complex Link <?> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel ... cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.20. lsmod | grep snd_hda_intel snd_hda_intel 31880 2 snd_hda_codec 87584 2 snd_hda_codec_realtek,snd_hda_intel snd_pcm 93160 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd 77096 16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device snd_page_alloc 10928 2 snd_hda_intel,snd_pcm I think I am missing the something-hdmi module? Is there such a thing?

  Read the article

• Wireless not working - HP Probook 4540s

  - by Oguzhan

  I just installed Ubuntu 12.04 on 3 HP Probook 4540s's, and none of them seems to be able to connect to wireless networks. I have 1 Probook 4540s with Windows 7 installed and I can access wlan from it. I tried installing the necessary drivers from HP's website, but it still doesn't seem to be working. I've seen other people with different Probooks having similar problems, but their computers seem to be able to detect and even attempt to connect wlans, while mine doesn't even acknowledge that it has wireless. Any help would be appreciated. lspci: 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Ivy Bridge PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.2 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 3 (rev c4) 00:1c.3 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 4 (rev c4) 00:1c.5 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 6 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Thames [Radeon 7500M/7600M Series] 03:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 30) 03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 30) 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 30) 04:00.0 Network controller: Ralink corp. Device 3290 04:00.1 Bluetooth: Ralink corp. Device 3298 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07)

  Read the article

• Wifi range issues and intermittent dropouts, Thinkpad Edge

  - by jimbo

  If I am more than a couple of metres from my access point (and I'm seeing this across various APs) with my newish Thinkpad Edge 15, running 10.10, the wifi performance becomes ... flaky. When this is happening, I see the following in dmesg, although I'm not sure if it's related: [ 2497.011099] intel ips 0000:00:1f.6: CPU power or thermal limit exceeded [ 2502.012711] intel ips 0000:00:1f.6: CPU power or thermal limit exceeded [ 2507.009254] intel ips 0000:00:1f.6: CPU power or thermal limit exceeded [ 2512.008367] intel ips 0000:00:1f.6: CPU power or thermal limit exceeded [ 2517.007467] intel ips 0000:00:1f.6: CPU power or thermal limit exceeded [ 2522.006558] intel ips 0000:00:1f.6: CPU power or thermal limit exceeded [ 2527.008157] intel ips 0000:00:1f.6: CPU power or thermal limit exceeded [ 2532.007251] intel ips 0000:00:1f.6: CPU power or thermal limit exceeded [ 2537.003838] intel ips 0000:00:1f.6: CPU power or thermal limit exceeded [ 2542.005427] intel ips 0000:00:1f.6: CPU power or thermal limit exceeded [ 2547.004496] intel ips 0000:00:1f.6: CPU power or thermal limit exceeded [ 2552.003611] intel ips 0000:00:1f.6: CPU power or thermal limit exceeded lspci -vvv has the following to say about my wireless adapter: 03:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 Subsystem: Intel Corporation Centrino Wireless-N 1000 BGN Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 49 Region 0: Memory at f0500000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: iwlagn Kernel modules: iwlagn If I get within a couple of metres of the access point, I still see that output in dmesg, but the connection stabilises. My question is threefold: how do I get better wifi range, what can/should I do about those messages in dmesg, and most crucially, are the two related? As ever let me know if there's other information that would help! Edit: I am using this machine in exactly the same locations I used my previous Thinkpad (T61) running various older versions of Ubuntu, so I definitely feel there is something wrong, rather me having unreasonable expectations of range!

  Read the article

• My raycaster is putting out strange results, how do I fix it?

  - by JamesK89

  I'm working on a raycaster in ActionScript 3.0 for the fun of it, and as a learning experience. I've got it up and running and its displaying me output as expected however I'm getting this strange bug where rays go through corners of blocks and the edges of blocks appear through walls. Maybe somebody with more experience can point out what I'm doing wrong or maybe a fresh pair of eyes can spot a tiny bug I haven't noticed. Thank you so much for your help! Screenshots: http://i55.tinypic.com/25koebm.jpg http://i51.tinypic.com/zx5jq9.jpg Relevant code: function drawScene() { rays.graphics.clear(); rays.graphics.lineStyle(1, rgba(0x00,0x66,0x00)); var halfFov = (player.fov/2); var numRays:int = ( stage.stageWidth / COLUMN_SIZE ); var prjDist = ( stage.stageWidth / 2 ) / Math.tan(toRad( halfFov )); var angStep = ( player.fov / numRays ); for( var i:int = 0; i < numRays; i++ ) { var rAng = ( ( player.angle - halfFov ) + ( angStep * i ) ) % 360; if( rAng < 0 ) rAng += 360; var ray:Object = castRay(player.position, rAng); drawRaySlice(i*COLUMN_SIZE, prjDist, player.angle, ray); } } function drawRaySlice(sx:int, prjDist, angle, ray:Object) { if( ray.distance >= MAX_DIST ) return; var height:int = int(( TILE_SIZE / (ray.distance * Math.cos(toRad(angle-ray.angle))) ) * prjDist); if( !height ) return; var yTop = int(( stage.stageHeight / 2 ) - ( height / 2 )); if( yTop < 0 ) yTop = 0; var yBot = int(( stage.stageHeight / 2 ) + ( height / 2 )); if( yBot > stage.stageHeight ) yBot = stage.stageHeight; rays.graphics.moveTo( (ray.origin.x / TILE_SIZE) * MINI_SIZE, (ray.origin.y / TILE_SIZE) * MINI_SIZE ); rays.graphics.lineTo( (ray.hit.x / TILE_SIZE) * MINI_SIZE, (ray.hit.y / TILE_SIZE) * MINI_SIZE ); for( var x:int = 0; x < COLUMN_SIZE; x++ ) { for( var y:int = yTop; y < yBot; y++ ) { buffer.setPixel(sx+x, y, clrTable[ray.tile-1] >> ( ray.horz ? 1 : 0 )); } } } function castRay(origin:Point, angle):Object { // Return values var rTexel = 0; var rHorz = false; var rTile = 0; var rDist = MAX_DIST + 1; var rMap:Point = new Point(); var rHit:Point = new Point(); // Ray angle and slope var ra = toRad(angle) % ANGLE_360; if( ra < ANGLE_0 ) ra += ANGLE_360; var rs = Math.tan(ra); var rUp = ( ra > ANGLE_0 && ra < ANGLE_180 ); var rRight = ( ra < ANGLE_90 || ra > ANGLE_270 ); // Ray position var rx = 0; var ry = 0; // Ray step values var xa = 0; var ya = 0; // Ray position, in map coordinates var mx:int = 0; var my:int = 0; var mt:int = 0; // Distance var dx = 0; var dy = 0; var ds = MAX_DIST + 1; // Horizontal intersection if( ra != ANGLE_180 && ra != ANGLE_0 && ra != ANGLE_360 ) { ya = ( rUp ? TILE_SIZE : -TILE_SIZE ); xa = ya / rs; ry = int( origin.y / TILE_SIZE ) * ( TILE_SIZE ) + ( rUp ? TILE_SIZE : -1 ); rx = origin.x + ( ry - origin.y ) / rs; mx = 0; my = 0; while( mx >= 0 && my >= 0 && mx < world.size.x && my < world.size.y ) { mx = int( rx / TILE_SIZE ); my = int( ry / TILE_SIZE ); mt = getMapTile(mx,my); if( mt > 0 && mt < 9 ) { dx = rx - origin.x; dy = ry - origin.y; ds = ( dx * dx ) + ( dy * dy ); if( rDist >= MAX_DIST || ds < rDist ) { rDist = ds; rTile = mt; rMap.x = mx; rMap.y = my; rHit.x = rx; rHit.y = ry; rHorz = true; rTexel = int(rx % TILE_SIZE) } break; } rx += xa; ry += ya; } } // Vertical intersection if( ra != ANGLE_90 && ra != ANGLE_270 ) { xa = ( rRight ? TILE_SIZE : -TILE_SIZE ); ya = xa * rs; rx = int( origin.x / TILE_SIZE ) * ( TILE_SIZE ) + ( rRight ? TILE_SIZE : -1 ); ry = origin.y + ( rx - origin.x ) * rs; mx = 0; my = 0; while( mx >= 0 && my >= 0 && mx < world.size.x && my < world.size.y ) { mx = int( rx / TILE_SIZE ); my = int( ry / TILE_SIZE ); mt = getMapTile(mx,my); if( mt > 0 && mt < 9 ) { dx = rx - origin.x; dy = ry - origin.y; ds = ( dx * dx ) + ( dy * dy ); if( rDist >= MAX_DIST || ds < rDist ) { rDist = ds; rTile = mt; rMap.x = mx; rMap.y = my; rHit.x = rx; rHit.y = ry; rHorz = false; rTexel = int(ry % TILE_SIZE); } break; } rx += xa; ry += ya; } } return { angle: angle, distance: Math.sqrt(rDist), hit: rHit, map: rMap, tile: rTile, horz: rHorz, origin: origin, texel: rTexel }; }

  Read the article

• Why Wifi no longer works 12.04.1

  - by Roger

  starting this morning over wifi (Realtek RTL8188CE) on CLEVO W253HU. May be due to the update before yesterday, more pilot managed, but somehow it worked yesterday. If someone has an idea of the problem. Back command lines: cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.1 LTS" lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 006: ID 192f:0416 Avago Technologies, Pte. Bus 002 Device 004: ID 5986:0315 Acer, Inc lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01) 03:00.0 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 05) 03:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 90) 03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 90) 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 90) lspci -nn | grep -i net 02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter [10ec:8176] (rev 01) 03:00.0 Ethernet controller [0200]: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller [197b:0250] (rev 05) lspci -k 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel modules: i2c-i801 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01) Subsystem: Realtek Semiconductor Co., Ltd. Device 9196 Kernel modules: rtl8192ce 03:00.0 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: jme Kernel modules: jme 03:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 90) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: sdhci-pci Kernel modules: sdhci-pci 03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 90) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel modules: sdhci-pci 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 90) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: jmb38x_ms Kernel modules: jmb38x_ms sudo lshw -C network *-network NON-RÉCLAMÉ description: Network controller produit: RTL8188CE 802.11b/g/n WiFi Adapter fabriquant: Realtek Semiconductor Co., Ltd. identifiant matériel: 0 information bus: pci@0000:02:00.0 version: 01 bits: 64 bits horloge: 33MHz fonctionnalités: pm msi pciexpress cap_list configuration: latency=0 ressources: portE/S:e000(taille=256) mémoire:f7d00000-f7d03fff *-network description: Ethernet interface produit: JMC250 PCI Express Gigabit Ethernet Controller fabriquant: JMicron Technology Corp. identifiant matériel: 0 information bus: pci@0000:03:00.0 nom logique: eth0 version: 05 numéro de série: 00:90:f5:c1:c6:45 taille: 100Mbit/s capacité: 1Gbit/s bits: 32 bits horloge: 33MHz fonctionnalités: pm pciexpress msix msi bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=jme driverversion=1.0.8 duplex=full ip=192.168.1.54 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s ressources: irq:44 mémoire:f7c20000-f7c23fff portE/S:d100(taille=128) portE/S:d000(taille=256) mémoire:f7c10000-f7c1ffff mémoire:f7c00000-f7c0ffff lsmod Module Size Used by btusb 18288 0 rfcomm 47604 0 bnep 18281 2 bluetooth 180104 11 btusb,rfcomm,bnep parport_pc 32866 0 ppdev 17113 0 binfmt_misc 17540 1 snd_hda_codec_realtek 224173 0 dm_crypt 23125 0 snd_hda_codec_hdmi 32474 0 uvcvideo 72627 0 videodev 98259 1 uvcvideo v4l2_compat_ioctl32 17128 1 videodev snd_hda_intel 33773 2 snd_hda_codec 127706 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi jmb38x_ms 17646 0 psmouse 87692 0 serio_raw 13211 0 memstick 16569 1 jmb38x_ms snd_seq_midi_event 14899 1 snd_seq_midi rtl8192ce 84826 0 rtl8192c_common 75767 1 rtl8192ce rtlwifi 111202 1 rtl8192ce snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq mac80211 506816 3 rtl8192ce,rtl8192c_common,rtlwifi mac_hid 13253 0 snd 78855 14 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device cfg80211 205544 2 rtlwifi,mac80211 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm mei 41616 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp usbhid 47199 0 hid 99559 1 usbhid i915 473035 3 drm_kms_helper 46978 1 i915 drm 242038 4 i915,drm_kms_helper jme 41259 0 i2c_algo_bit 13423 1 i915 sdhci_pci 18826 0 sdhci 33205 1 sdhci_pci wmi 19256 0 video 19596 1 i915 iwconfig lo no wireless extensions. eth0 no wireless extensions. ifconfig eth0 Link encap:Ethernet HWaddr 00:90:f5:c1:c6:45 inet adr:192.168.1.54 Bcast:192.168.1.255 Masque:255.255.255.0 adr inet6: fe80::290:f5ff:fec1:c645/64 Scope:Lien UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Packets reçus:4513 erreurs:0 :0 overruns:0 frame:0 TX packets:4359 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:1000 Octets reçus:3471675 (3.4 MB) Octets transmis:712722 (712.7 KB) Interruption:44 lo Link encap:Boucle locale inet adr:127.0.0.1 Masque:255.0.0.0 adr inet6: ::1/128 Scope:Hôte UP LOOPBACK RUNNING MTU:16436 Metric:1 Packets reçus:686 erreurs:0 :0 overruns:0 frame:0 TX packets:686 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 Octets reçus:64556 (64.5 KB) Octets transmis:64556 (64.5 KB) sudo iwlist scan lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. uname -r -m 3.2.0-30-generic x86_64 cat /etc/network/interfaces auto lo iface lo inet loopback nm-tool NetworkManager Tool State: connected (global) - Device: eth0 [Connexion filaire 1] ------------------------------------------ Type: Wired Driver: jme State: connected Default: yes HW Address: 00:90:F5:C1:C6:45 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.1.54 Prefix: 24 (255.255.255.0) Gateway: 192.168.1.1 DNS: 192.168.1.1 sudo rfkill listrfkill list 1: hci0: Bluetooth Soft blocked: no Hard blocked: no The absence of line "Kernel driver in use:" the return of lspci-k made ??me think that it is not loaded yet but he seems to be. lsmod | grep rtl8192ce rtl8192ce 137478 0 rtlwifi 118749 1 rtl8192ce mac80211 506816 2 rtl8192ce,rtlwifi I found something disturbing in / var / log / syslog Sep 14 11:40:11 pcroger kernel: [ 64.048783] rtl8192ce-0:rtl92c_init_sw_vars():<0-0> Failed to request firmware! Sep 14 11:40:11 pcroger kernel: [ 64.048795] rtlwifi-0:rtl_pci_probe():<0-0> Can't init_sw_vars. Sep 14 11:40:11 pcroger kernel: [ 64.048835] rtl8192ce 0000:02:00.0: PCI INT A disabled Sep 14 11:40:11 pcroger kernel: [ 64.943345] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6 frozen Sep 14 11:40:11 pcroger kernel: [ 64.943358] ata1.00: failed command: READ FPDMA QUEUED Sep 14 11:40:11 pcroger kernel: [ 64.943371] ata1.00: cmd 60/00:00:00:68:6a/04:00:0b:00:00/40 tag 0 ncq 524288 in Sep 14 11:40:11 pcroger kernel: [ 64.943374] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) Sep 14 11:40:11 pcroger kernel: [ 64.943381] ata1.00: status: { DRDY } Ubuntu and takes forever to start (2 min).

  Read the article

• No WIFI or LAN on Ubuntu 12.04 or 12.10 Live CD/USB using Toshiba qosmio x870

  - by Mighty

  I recently had issues with secure boot and couldn't boot the Live CD/USB but after disabling secure boot, I was able to 'TRY UBUNTU'. My currently problem is that I can't access WIFI or LAN from either Ubuntu 12.04 or 12.10 Live CD/USB which I do from Windows 8. Also, the wireless button is able to turn on and off the wireless LED but doesn't find available WIFI. Please, what should I do to get both WIFI and LAN working on Ubuntu using Toshiba qosmio x870? UPDATED: Here's the output of lspci: ubuntu@ubuntu:~$ lspci 00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4) 00:1c.4 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 5 (rev c4) 00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1213 (rev a1) 07:00.0 Ethernet controller: Atheros Communications Inc. AR8161 Gigabit Ethernet (rev 10) 08:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8723 09:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)

  Read the article

• Setting up Beats audio on HP Pavilion m6

  - by Joel Auterson

  I have an HP Pavilion m6-1054sa laptop, with a Beats subwoofer on the bottom. The normal laptop speakers work fine under Ubuntu but the Beats speaker(s?) does not. Anyone know how to get this working? Here's my lspci output, if it helps... 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Ivy Bridge PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 2 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Thames XT/GL [Radeon HD 7600M Series] (rev ff) 07:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5289 (rev 01) 07:00.2 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 0a) 08:00.0 Network controller: Intel Corporation Centrino Wireless-N 2230 (rev c4)

  Read the article

• WiFi is not detecting in compaq presario c700

  - by charan

  Hi I have a Compaq Presario c700 laptop,I just installed Ubuntu 10.04 in my laptop. My wireless networks are not showing in network manager. charan@charan-laptop:~$ lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 03) 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 03) 00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a03] (rev 03) 00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03) 00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03) 00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03) 00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03) 00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 03) 00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03) 00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 03) 00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03) 01:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [14e4:4311] (rev 02) 02:01.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)

  Read the article

• Generating radial indicator images using C#

  - by DigiMortal

  In one of my projects I needed to draw radial indicators for processes measured in percent. Simple images like the one shown on right. I solved the problem by creating images in C# and saving them on server hard disc so if image is once generated then it is returned from disc next time. I am not master of graphics or geometrics but here is the code I wrote. Drawing radial indicator To get things done quick’n’easy way – later may some of younger developers be the one who may need to changes things – I divided my indicator drawing process to four steps shown below. 1. Fill pie 2. Draw circles 3. Fill inner circle 4. Draw text Drawing image Here is the code to draw indicators. private static void SaveRadialIndicator(int percent, string filePath) {     using (Bitmap bitmap = new Bitmap(100, 100))     using (Graphics objGraphics = Graphics.FromImage(bitmap))     {         // Initialize graphics         objGraphics.Clear(Color.White);         objGraphics.SmoothingMode = SmoothingMode.AntiAlias;         objGraphics.TextRenderingHint = TextRenderingHint.ClearTypeGridFit;           // Fill pie         // Degrees are taken clockwise, 0 is parallel with x         // For sweep angle we must convert percent to degrees (90/25 = 18/5)         float startAngle = -90.0F;                        float sweepAngle = (18.0F / 5) * percent;           Rectangle rectangle = new Rectangle(5, 5, 90, 90);         objGraphics.FillPie(Brushes.Orange, rectangle, startAngle, sweepAngle);           // Draw circles         rectangle = new Rectangle(5, 5, 90, 90);         objGraphics.DrawEllipse(Pens.LightGray, rectangle);         rectangle = new Rectangle(20, 20, 60, 60);         objGraphics.DrawEllipse(Pens.LightGray, rectangle);           // Fill inner circle with white         rectangle = new Rectangle(21, 21, 58, 58);         objGraphics.FillEllipse(Brushes.White, rectangle);           // Draw text on image         // Use rectangle for text and align text to center of rectangle         var font = new Font("Arial", 13, FontStyle.Bold);         StringFormat stringFormat = new StringFormat();         stringFormat.Alignment = StringAlignment.Center;         stringFormat.LineAlignment = StringAlignment.Center;           rectangle = new Rectangle(20, 40, 62, 20);         objGraphics.DrawString(percent + "%", font, Brushes.DarkGray, rectangle, stringFormat);           // Save indicator to file         objGraphics.Flush();         if (File.Exists(filePath))             File.Delete(filePath);           bitmap.Save(filePath, ImageFormat.Png);     }        } Using indicators on web page To show indicators on your web page you can use the following code on page that outputs indicator images: protected void Page_Load(object sender, EventArgs e) {     var percentString = Request.QueryString["percent"];     var percent = 0;     if(!int.TryParse(percentString, out percent))         return;     if(percent < 0 || percent > 100)         return;       var file = Server.MapPath("~/images/percent/" + percent + ".png");     if(!File.Exists(file))         SaveImage(percent, file);       Response.Clear();     Response.ContentType = "image/png";     Response.WriteFile(file);     Response.End(); } Om your pages where you need indicator you can set image source to Indicator.aspx (if you named your indicator handling file like this) and add percent as query string:     <img src="Indicator.aspx?percent=30" /> That’s it! If somebody knows simpler way how to generate indicators like this I am interested in your feedback.

  Read the article

• How does loop address alignment affect the speed on Intel x86_64?

  - by Alexander Gololobov

  I'm seeing 15% performance degradation of the same C++ code compiled to exactly same machine instructions but located on differently aligned addresses. When my tiny main loop starts at 0x415220 it's faster then when it is at 0x415250. I'm running this on Intel Core2 Duo. I use gcc 4.4.5 on x86_64 Ubuntu. Can anybody explain the cause of slowdown and how I can force gcc to optimally align the loop? Here is the disassembly for both cases with profiler annotation: 415220 576 12.56% |XXXXXXXXXXXXXX 48 c1 eb 08 shr $0x8,%rbx 415224 110 2.40% |XX 0f b6 c3 movzbl %bl,%eax 415227 0.00% | 41 0f b6 04 00 movzbl (%r8,%rax,1),%eax 41522c 40 0.87% | 48 8b 04 c1 mov (%rcx,%rax,8),%rax 415230 806 17.58% |XXXXXXXXXXXXXXXXXXX 4c 63 f8 movslq %eax,%r15 415233 186 4.06% |XXXX 48 c1 e8 20 shr $0x20,%rax 415237 102 2.22% |XX 4c 01 f9 add %r15,%rcx 41523a 414 9.03% |XXXXXXXXXX a8 0f test $0xf,%al 41523c 680 14.83% |XXXXXXXXXXXXXXXX 74 45 je 415283 ::Run(char const*, char const*)+0x4b3 41523e 0.00% | 41 89 c7 mov %eax,%r15d 415241 0.00% | 41 83 e7 01 and $0x1,%r15d 415245 0.00% | 41 83 ff 01 cmp $0x1,%r15d 415249 0.00% | 41 89 c7 mov %eax,%r15d 415250 679 13.05% |XXXXXXXXXXXXXXXX 48 c1 eb 08 shr $0x8,%rbx 415254 124 2.38% |XX 0f b6 c3 movzbl %bl,%eax 415257 0.00% | 41 0f b6 04 00 movzbl (%r8,%rax,1),%eax 41525c 43 0.83% |X 48 8b 04 c1 mov (%rcx,%rax,8),%rax 415260 828 15.91% |XXXXXXXXXXXXXXXXXXX 4c 63 f8 movslq %eax,%r15 415263 388 7.46% |XXXXXXXXX 48 c1 e8 20 shr $0x20,%rax 415267 141 2.71% |XXX 4c 01 f9 add %r15,%rcx 41526a 634 12.18% |XXXXXXXXXXXXXXX a8 0f test $0xf,%al 41526c 749 14.39% |XXXXXXXXXXXXXXXXXX 74 45 je 4152b3 ::Run(char const*, char const*)+0x4c3 41526e 0.00% | 41 89 c7 mov %eax,%r15d 415271 0.00% | 41 83 e7 01 and $0x1,%r15d 415275 0.00% | 41 83 ff 01 cmp $0x1,%r15d 415279 0.00% | 41 89 c7 mov %eax,%r15d

  Read the article

• How to compensate the flipped coordinate system of core graphics for easy drawing?

  - by mystify

  It's really a pain, but always when I draw an UIImage in -drawRect:, it's upside-down. When I flip the coordinates, the image draws correctly, but at the cost of all other CG functions drawing "wrong" (flipped). What's your strategy when you have to draw images and other things? Is there any rule of thumb how to not get stuck in this problem over and over again? Also, one nasty thing when I flip the y-axis is, that my CGRect from the UIImageView frame is wrong. Instead of the origin appearing at 10,10 upper left as expected, it appears at the bottom. But at the same time, all those normal line drawing functions of CGContext take correct coordinates. drawing a line in -drawRect with origin 10,10 upper left, will really start at upper left. But at the same time that's strange, because core graphics actually has a flipped coordinate system with y 0 at the bottom. So it seems like something is really inconsistent there. Drawing with CGContext functions takes coordinates as "expected" (cmon, nobody thinks in coordinates starting from bottom left, that's silly), while drawing any kind of image still works the "wrong" way. Do you use helper methods to draw images? Or is there anything useful that makes image drawing not a pain in the butt?

  Read the article

• Video works with 'Try me' but not after install. What is the difference? U12.04LTS,

  - by HarveyP

  My hard drive got corrupted so I did a reinstall. Tested Youtube in FF during 'try me' and it worked - jerky, but it worked. Instal without all the updates (576 outstanding now) in order to get ff installed as per the demo - to no avail. In 'try me' mode ff NEVER crashed! After install ff crashed whilst I was typing in 'youtube' in the address field. When I finally got to youtube - no video. What is the difference between ff in try me and ff after install? Off to try some selected updates now to see if I can see it for myself. In previous installation I had several profiles and aliased ff with -safe-mode switch to simplify startup of most stable ff. Also found that ff startup in graphic mode worked better (but still without video) with all of the extensions disabled and all of the plugins set to "ask" and always denied ... I have SiS graphic card in SiS Motherboard for XP and ancient Hyundai ImageQuest QV770 monitor. I have Ubuntu 12.04.01 LTS 1 day after install with only the immediate upgrades requested to language pack (English UK). Using FR Alternative keyboard. Connected with domestic wifi network from Orange (FT) I really want to use Skype, but won't bother installing it (again) without video as I can do my sms on FB - whilst ff is not crashed ... Update ... Is something overflowing? I have just had to reboot in order to get ff to restart in any way shape or form - restart on crash form generates new crash form, etc. It was however a good half hour before it crashed so some improvement over conditions before disk corruption. I have now installed all of the critical updates (332 recommended updates still outstanding) which included some relating to ff. Still no video. Still crashing - especially when on Grepolis website. Since the re-install I have had a lovely 1024x768 screen, but after last ff crash and reboot I got a message about 'low graphics mode' and 'setting things myself'. I was not sufficiently tuned in at the time to take proper note - I have no doubt I shall see it again and shall report accordingly. I still have only laptop options for my screen and do not know how to rectify this. Spent a few days with ubuntu on a different, newer machine which has now suffered a graphics breakdown. Returned to this old one again, but with new flat screen Monitor. Found SIS drivers for my graphics BUT it is intended for Red Hat 7.2. I chose this over the version for 7.0 because I thought what the hell, I might not be able to do anything with either of them but this is the later one ... The file will not open with software manager - found a similar problem on Overclock but it has not helped me to install this driver. File name is sis_drv.o-410 and it is currently idling away in my Downloads folder ... I have tried the solution offered on another sis problem, but this shows that my xserver-xorg-video-sis driver is up to date. I am now at a loss as to how to proceed if I can't install the latest sis driver from sis ... Does nobody know how FF changes from "try-me" to "installed"? Any time I MUST have video I reboot from the disk again, but this is tedious! Also one of the things I mock most about MS is the constant rebooting ... UPDATE 10/6/2014 I have installed chromium-browser - worse, crashes even more often than ff.I have installed epiphany - better; Video works but not the associated soundtrack.FireFox is version 14.01 in 'try me' and version 29.0 from my install. Would it be useful to try to downgrade FireFox in order to get video?

  Read the article

• Cannot get ATI Drivers installed

  - by bittoast67

  I am trying to install the Catalyst driver. The best I can get is a strange resolution problem and firefox acts all wonkt. The worst I have gotten is low graphics mode in which I just reinstall Ubuntu. I have a HP Pavilion Dv7 laptop. With Radeon 3200 HD. I plan to try again with a fresh install of Ubuntu 12.4.3 as I have heard its the most compatible. This is what I have done: I have tried just the easy way of going to synaptic and installing the drivers that way. the fglrx package (not the fglrx update). And if memory serves I think that boots me into low graphics mode. So, fresh install of Ubuntu and tried again. I have done everything a couple times from this site (http://wiki.cchtml.com/index.php/Ubuntu_Precise_Installation_Guide) following every instruction to a T. That gets me something, such as a lowered fan speed and a much cooler computer, but I also lose most of my resolution. And displays says its the best resolution I can get. I also have a very screwy firefox. Using this method I can see AMD Catalyst Control Center in my dash (two of them really one administrator and one not) but when I try to open it it says no amd driver detected. So again, ubuntu reinstall. I have tried the GUI method from the Legacy driver I got from AMD's site. It runs through smoothly and at the very end after I exit the installer it gives me an error. I have also tried various other methods using terminal, as well as various different drivers (the one from the amd's site and the one suggested in the above link for my graphics card) both to no avail. When I try the method in the link on number 2, and I get the super low res and screwy fire fox. I type in, fglrxinfo ,and get a badrequest error. I have yet to type in fglrxinfo and get anything like what I am supposed to. UPDATE: I am now currently reinstalling Ubuntu 12.4. I tried the above mentioned link - thank you very much!- just to see on the previously failed driver attempt by following the purge commands. And to no avail when typing fglrxinfo I still get the badrequest thing. I will update again after a try with a true fresh install. Thanks again!! UPDATE: Alright everyone. Still no go. I have done everything word per word in the provided tutorial. I have rebooted my computer again to a fucked up resolution and this is what I get when typing fglrxinfo: $ fglrxinfo X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 153 (GLX) Minor opcode of failed request: 19 (X_GLXQueryServerString) Serial number of failed request: 12 Current serial number in output stream: 12 I would like to add that when installing this file: fglrx_8.970-0ubuntu1_amd64.deb I got this: Building initial module for 3.8.0-29-generic Error! Bad return status for module build on kernel: 3.8.0-29-generic (x86_64) Consult /var/lib/dkms/fglrx/8.970/build/make.log for more information. update-initramfs: deferring update (trigger activated) Processing triggers for ureadahead ... Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.8.0-29-generic Processing triggers for libc-bin ... ldconfig deferred processing now taking place Any ideas? Anyone? I cant for the life of me figure out what I am doing wrong.

  Read the article

• kvm works only when kvm-intel is unloaded

  - by Sathya

  I am new to kvm. I have this strange issue. But before explaining the issue, here is my set up. I try to install VM on my Host which is a Acer Laptop 5720 Has T7500 Intel processor. The cpu flags indicate that Virtualization is supported. I run Ubuntu 10.04 (lucid) on it. It comes with kvm. Now coming to the issue - I dont get any errors while executing "sudo modprobe kvm-intel". So I presume my processor does indeed support hardware virtualization. I use virt-manager and create a VM on which I install ubuntu from an *.iso file. When I start the VM it says it is running. No signs of any trouble. I can see the domain list in "virsh list". But when I try to connect to the VM thru VNC, all I get to see is a blank screen (no cursor). There is no response to any key press. I changed the video mode etc. Tried all different combinations but none work. But strangely, if I shutdown the vm an virt-manager and then unload the module by doing "sudo modprove -r kvm-intel", everything works fine. ie., I can see the screen via VNC. I am able to install the OS and so on. So what does this mean ? IS hardware virtualization not supported ? How come there is no error anywhere ? dmesg | grep kvm doesnt report anything. Can someone throw light on what excatly is happening ?

  Read the article

• XP/Intel wirelss only showing 'hpsetup' ad-hoc network that isn't there

  - by ewall

  Trying to help my friend with her work XP laptop, which recently stopped seeing any wireless SSIDs except the SSID 'hpsetup' (presumably from a wireless-enabled HP printer). Relevant information: The laptop is a Lenovo T500 (Centrino 2 chipset) with XP SP3. The network adapter is Intel WiFi Link 5300 AGN (built-in). The latest version (13.5) of the Intel drivers only are installed, not the Intel config software, so XP is using the Wireless Zero-Config manager. The wireless router is a NetGear WGR614 v7 with 802.11b/g. The SSID is broadcasting, and all the other laptops in the house can see and connect to it. On the laptop, I have tried repairing the network connection, disabling power management, turning off 802.11a & n radio, and more... but it didn't help. Some of the wireless settings are managed by Group Policy from her office (I get the "At least one of your changes was not applied successfully to your wireless configuration" message). It is enforced to connect to "Access point (infrastructure) networks only". The real kicker is that my laptop does not an SSID named 'hpsetup' here, but it can see several broadcasted SSIDs including the one we want, while my friend's laptop doesn't see any SSID except 'hpsetup'. Any suggestions?

  Read the article

• How are video card\graphics drivers written exactly? [closed]

  - by Bigyellow Bastion

  I was thinking, since I want an application layer for my operating system, how or what would be the best way to write, or better understand how to write, my own graphics device drivers or software to enable application layered software to request data through my graphics system (I.e. windows, icons, mouse pointers). I don't need every little detail, I'd just like some possible insight on the procedure one may accomplish this feat in, perhaps the best way to understand the interaction between the graphics GUI rendering software to the hardware interaction directly, and the application software requesting the graphics driver itself.

  Read the article

• Un constructeur russe dévoile un modèle de Netbook sous MeeGo, une bonne nouvelle pour l'OS open-source de Intel et de Nokia

  Un constructeur russe dévoile un modèle de Netbook sous MeeGo Une bonne nouvelle pour l'OS open-source de Intel et de Nokia Quelques jours après la publication de l'interview d'un responsable d'Intel, très confiant sur l'avenir et le potentiel de MeeGo sur le long terme, un constructeur russe dévoile un modèle de Netbook embarquant cet OS. Cette machine de 10.1 pouces est baptisée « DNS » et cible essentiellement le marché local. En dehors de l'OS, sa configuration ne défraie pas la chronique. DNS est propulsé par le processeur Intel Atom N550 cadencé à 1.5 GHz et équipé d'une carte graphique Intel GMA 3150...

  Read the article

• Wireless with WEP extremely slow on an Acer Timeline 4810T with a Centrino Wireless-N 1000

  - by noq38

  I've upgraded an Acer Timeline 4810T to Ubuntu 11.10. Everything works fine except for the darn wireless interface (network manager). I just tested the wireless interface over a non-encrypted signal and it works beautifully. The issue is definitely related to WEP. Unfortunately, some of the networks I need to connect to are WEP encrypted, therefore this is a serious issue for me that is preventing me from using Ubuntu on my laptop. This was no problem in 11.04 and prior. Is there a simple solution for this? Any suggestions? Here's more hardware information. Hopefully this helps to debug the network issue: sudo lshw -class network *-network description: Wireless interface product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 00 serial: 00:1e:64:3c:5e:e0 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=3.0.0-13-generic-pae firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:43 memory:d2400000-d2401fff lspci 02:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 1: acer-wireless: Wireless LAN Soft blocked: no Hard blocked: no Many thanks for your help! I just tested the wireless interface over a non-encrypted signal and it works beautifully. The issue is definitely related to WEP. Unfortunately, some of the networks I need to connect to are WEP encrypted, therefore this is a serious issue for me that is preventing me from using Ubuntu on my laptop. Any suggestions?

  Read the article

• Wacom Bamboo CTH460L issues

  - by Robert Smith

  I recently bought a Wacom Bamboo Pen & Touch CTH460L. I installed doctormo's PPA, however, the pen functionality didn't work and the touch was very glitchy (when I touched it, it immediately double clicked and began to drag elements in the screen). I tried to configure it using the wacom-utility package in the Synaptic Package Manager (version 1.21-1) but that didn't work either. Then I followed this post (#621, written by aaaalex), and after some problems trying to restart Ubuntu (graphics related problems), the pen works fine (it could be better, though) but the touch functionality doesn't work anymore. Currently I have installed xserver-xorg-input-wacom (1:0.10.11-0ubuntu7), wacom-dkms (0.8.10.2-1ubuntu1) and wacom-utility. The Wacom Utility only displays an "options" field under "Wacom BambooPT 2FG 4X5" but no other option to configure it. What is the correct way to get this tablet working on Ubuntu 10.04?. By the way, currently I can't start Ubuntu properly when the tablet is connected (in that case, Ubuntu start in low graphics mode). I need to connect it later. UPDATE: I uninstalled xserver -xorg-input-wacom, and wacom-utility because one of them prevented Ubuntu to start normally. I only re-installed wacom-dkms 0.8.10.2-1ubuntu1. The pen is working but no touch functionality. The side buttons don't work either. Thanks in advance.

  Read the article

• Acer Aspire One 725 - missing graphic card driver?

  - by Melon

  Recently I bought an Acer Aspire One 725 Netbook and installed Ubuntu 12.10 on it. I bought it, because it can run HD movies and has Full HD on external VGA port. However, movies from youtube have a really slow framerate. If you open three tabs in Opera (for example g-mail, youtube and askubuntu) it gets really laggy. My suspicion is that the driver for graphic card is missing. When I check the System->Details->Graphics the driver is unknown. After running lspci | grep VGA I get this output: 00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Device 980a From what I see, I have a AMD C70 processor integrated with (or something similar) AMD Radeon HD 6290. Has anyone had the same problem? Do you know which drivers need to be installed for the graphics to work properly? On official Acer page there are only drivers for Win7 and Win8... Update: I have tried installing fglrx but I get the following error (either I don't have libraries or someone didn't make a clean build before release ;) /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function ‘KCL_MEM_AllocLinearAddrInterval’: /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:2124:5: error: implicit declaration of function ‘do_mmap’ [-Werror=implicit-function-declaration] /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:2124:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function ‘kasInitExecutionLevels’: /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: error: ‘cpu_possible_map’ undeclared (first use in this function) /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: note: each undeclared identifier is reported only once for each function it appears in /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: warning: left-hand operand of comma expression has no effect [-Wunused-value] Update 2: After fixing the erros in compilation, ubuntu acts bizarre and unstable (no left icon panel, no upper panel, cannot run any programs, I only see desktop)

  Read the article

• Wacom Bamboo CTH460L issues in Ubuntu 10.04

  - by Robert Smith

  I recently bought a Wacom Bamboo Pen & Touch CTH460L. I installed doctormo PPA, however, the pen functionality didn't work and the touch was very glitchy (when I touched it, it immediately double clicked and began to drag elements in the screen). I tried to configure it using the wacom-utility package in the Synaptic Package Manager (version 1.21-1) but that didn't work either. Then I followed this post (#621, written by aaaalex), and after some problems trying to restart Ubuntu (graphics related problems), the pen works fine (it could be better, though) but the touch functionality doesn't work anymore. Currently I have installed xserver-xorg-input-wacom (1:0.10.11-0ubuntu7), wacom-dkms (0.8.10.2-1ubuntu1) and wacom-utility. The Wacom Utility only displays an "options" field under "Wacom BambooPT 2FG 4X5" but no other option to configure it. What is the correct way to get this tablet working on Ubuntu 10.04?. By the way, currently I can't start Ubuntu properly when the tablet is connected (in that case, Ubuntu start in low graphics mode). I need to connect it later.

  Read the article

• Why does Ubuntu gets stuck on the loading screen?

  - by mohit

  I've been experiencing many problem lately since I fresh installed Ubuntu 12.04 LTS on my SONY VAIO VPCEH with Windows 7 previously installed. Sometimes when I try to boot Ubuntu, it gets stuck at loading screen. There seems to be some problem with driver (as far I can judge). Following is the log generated, when I press Esc during the boot (before the problem occurs): ... * Stopping System V initialization compatibility [ok] * Starting System V runlevel compatibility [ok] * Starting crash report submission daemon [ok] * Starting automatic crash report generation [ok] ... ... * Starting LightDM Display Manager [ok] Nothing works after that, no Esc, etc, except restart. Also I've observed the following: Inactivity of Hard-drive (Led doesn't glows). Flashing, or blinking, of Caps-lock and Scroll-lock On restart, Ubuntu seem to load successfully. However, the loading screen has somewhat basic graphics. This problem started after I installed Additional drivers: NVIDIA accelerated graphics driver Also, most of the times Ubuntu loads without any problem. However, it is annoying to restart everytime it fails. So my question is: Why this happens and what is the solution?

  Read the article

• WiFi can't reconnect after suspend/hibernate on Ubuntu 12.04.1

  - by CyberOPS

  I've had this problem since Ubuntu 11.10 (my first install) but I was able to get around this issue with this answer. When I updated to Ubuntu 12.04 I encrypted the home folder, so I wasn't able to suspend or hibernate anymore (disappointing :l). Because of this and another issue I had1, I chose to reinstall. Sometime after I reinstalled, I was reminded about reconnection issue because it wasn't working after I suspended. I tried to use the same fix as before but I couldn't get it to work. I've also tried a couple other different fixes I found around the web but they didn't work. Since I'm new to linux, I'm gonna have a tough time figuring this out by myself. So does anyone know how, or what I need to figure out how, to fix this? Info: Computer: HP Pavilion dv6t-6b00 CTO Quad Edition Entertainment Notebook PC Network Card: Intel® Centrino® Wireless-N 1000 OS: Ubuntu 12.04.1 (x64) dual booting with Windows 7 (x64) (Not using Wubi) Wireless Card Driver: Intel Wireless WiFi Link drivers for Linux (iwlwifi) 1 - ntfs-config caused colord to crash on startup, even after NTFS-Config was removed.

  Read the article

• Unity 3D does not work on Dell system with a AMD Radeon HD 6470M

  - by VeeKay

  I am running 64 bit Ubuntu on Dell with 1GB graphic card. I login with "Ubuntu" hoping to see Unity 3d but it doesn't. Unity 2D runs instead. when I type in echo "$DESKTOP_SESSION" it confirms the Unity-2D. I've checked the System info that shows like : The graphics row shows itself as empty. SO I've presumed that the graphic drivers aren't detected and hence I went to Unity- Additional Drivers and installed the fglrx driver that the UI has suggested. Even after installing so, the graphics part in System info details shows nothing and still Unity 2D runs in spite of all the effort. Please help! How can I get my Unity 3D back? Hardware Info Video Card : AMD Radeon™ HD 6470M - 1GB (For ICC) RAM : 6GB (1 X 2GB + 1 X 4GB) 2 DIMM DDR3 1333Mhz OS : 64 bit Ubuntu 11.10 Edit : Output for /usr/lib/nux/unity_support_test -p X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 155 (GLX) Minor opcode of failed request: 19 (X_GLXQueryServerString) Serial number of failed request: 21 Current serial number in output stream: 21

  Read the article

< Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >