Search Results

Search found 11395 results on 456 pages for 'intel integrated graphics'.

Page 48/456 | < Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >

• Low graphic mode after switching to fglrx drivers

  - by MrKenkadze27

  I have another problem on my laptop after trying to fix another issue. So, because of this issue, I wanted to switch to fglrx to fix it and after restart, I got this screen: I went back to terminal and I got rid of this problem by "purge"-ing the fglrx driver and removing it, going back to problem number one. I tried lot of methods to fix this such as this ones but they ether switched back to open-source drivers or didn't helped at all. So would anyone like to help? maybe give some commends to try? My Laptop has 2 GPU, AMD Radeon HD 7650M and Intel(R) HD Graphics 4000. AMD is running always making my laptop too hot. Here's one of the Xorg.5.log file paste, I am sure it will be useful finding my problem. Thanks! Please make answer easy to understand as I am not an expert, this problem is keeping me from being one. Also the AMD driver which can be downloaded from their site doesn't install, it says non compatible graphics card but Ubuntu Software Updater sure installs it.

  Read the article

• Should ATI catalyst be installed for sake of openCL?

  - by G Sree Teja Simha

  I have a HP Envy 4 1025tx with Hybrid graphics. Although this is a 64bit system, I've installed 32bit Ubuntu on it for some reasons.(Hybrid graphics don't do well with 64bit Ubuntu.-"Some one on some forum") I had heating problems with the GPU but I've fixed them all with vgaswitcheroo. But now I wanted to use my Blender on my Ubuntu. To my surprise Blender didn't detect the dedicated 7670m card in my machine. I've confirmed with cat /sys/kernel/debug/vgaswitcheroo/switch Both IGD and DIS were up and running. I dont seem to have libopencl on my /usr/lib even though my synaptic manager says that I have installed it. I'm not quite sure what I've installed. It says that I've installed "ocl-icd-libopencl1". So my question is... Do I have opencl on my system? If not do I have to get propreitary ATI drivers for sake of opencl(fglrx wrecks up my unity totally on my system I need directions to fix it if this is the choice)? Should I get a 64bit Ubuntu installed on this system?

  Read the article

• IIS7 integrated mode closing token between requests

  - by user607287

  We are migrating to IIS7 integrated mode and have come across an issue. We authenticate using WindowsAuthentication but then store a reference to the WindowsPrincipal so that on future requests we can authorize as needed against AD. In IIS 7 Integrated mode, the token is being closed (between requests) so that when we try to run IsInRole it generates a disposed exception. Is there a way to cache this token or change our use of WindowsPrincipal so that we don't need to make successive AD requests to get it for each authorization request? Here is the exception being thrown from WindowsPrincipal.IsInRole("") - System.ObjectDisposedException: {"Safe handle has been closed"} Thanks.

  Read the article

• How to store bitmaps in memory?

  - by Geotarget

  I'm working with general purpose image rendering, and high-performance image processing, and so I need to know how to store bitmaps in-memory. (24bpp/32bpp, compressed/raw, etc) I'm not working with 3D graphics or DirectX / OpenGL rendering and so I don't need to use graphics card compatible bitmap formats. My questions: What is the "usual" or "normal" way to store bitmaps in memory? (in C++ engines/projects?) How to store bitmaps for high-performance algorithms, such that read/write times are the fastest? (fixed array? with/without padding? 24-bpp or 32-bpp?) How to store bitmaps for applications handling a lot of bitmap data, to minimize memory usage? (JPEG? or a faster [de]compression algorithm?) Some possible methods: Use a fixed packed 24-bpp or 32-bpp int[] array and simply access pixels using pointer access, all pixels are allocated in one continuous memory chunk (could be 1-10 MB) Use a form of "sparse" data storage so each line of the bitmap is allocated separately, reusing more memory and requiring smaller contiguous memory segments Store bitmaps in its compressed form (PNG, JPG, GIF, etc) and unpack only when its needed, reducing the amount of memory used. Delete the unpacked data if its not used for 10 secs.

  Read the article

• External display resolution issue

  - by Steven

  I'm new to Ubuntu. I've 'dabbled' in the past but Windows was annoying me too much so I finally made the change. One thing I use my laptop for is outputting the screen onto an external monitor. In Windows this usually works fine (but when there is an issue, it's a pain to resolve and has crashed my computer on many occasions). In Ubuntu it's a very simple case of "plug and play" because it displays the content immediately with no major problems. However, I can only alter the resolution of the external display to 4:3 formats, whereas the external monitor is 16:9, so the picture is stretched. In Windows there's loads of resolutions to choose from. If I disable the laptop's screen, it still doesn't allow me to display the correct resolution externally (on VGA). Further to that, if I close the laptop it keeps the external screen as it is, but when I reopen the laptop, the laptop screen doesn't turn back on until I restart. If it's a video I am watching, I can use VLC to alter the aspect ratio so the video looks fine, but it's quite an annoying work around. I used terminal to find my graphics controller, which is "Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07)" (not great, I know... the laptop was a free gift with my mobile!) Any idea of how I can get the resolution on the external monitor to be correct?

  Read the article

• Problem with installing Nvidia display drivers on Ubuntu 13.10

  - by Pascal

  Hello everyone and thank you for taking a look at this topic! I'm currently trying out Ubuntu 13.10 but I keep hitting a wall when it comes to installing a driver. I've tried: sudo apt-get install nvidia-current This resulted in a un-bootable system. The screen just stayed black and the cursor displayed as an 'X'. After that I did had to re-install Ubuntu. The computer I'm using is an Acer-Aspire-V3 with a build in Nvidia geforce GT 630M and also with a Intel HD graphics chip-set (not sure if chip-set is the right word here). "lspci | grep VGA" output: pascal@pascal-Aspire-V3-571G:~$ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 630M] (rev a1) I've searched a bit here and there and found out that it would be wise to mention that this laptop is using (or so I think) Nvidia Optimus, not sure if it will add anything to the subject but at least I'll mention it just to be sure. Now to the questions: Q1 How is this caused and how can I fix it? Q2 What additional information could I provide to help you help me?

  Read the article

• Acer Aspire One 725 - missing graphic card driver for Radeon HD 6290?

  - by Melon

  Recently I bought an Acer Aspire One 725 Netbook and installed Ubuntu 12.10 on it. I bought it, because it can run HD movies and has Full HD on external VGA port. However, movies from youtube have a really slow framerate. If you open three tabs in Opera (for example g-mail, youtube and askubuntu) it gets really laggy. My suspicion is that the driver for graphic card is missing. When I check the System->Details->Graphics the driver is unknown. After running lspci | grep VGA I get this output: 00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Device 980a From what I see, I have a AMD C70 processor integrated with (or something similar) AMD Radeon HD 6290. Has anyone had the same problem? Do you know which drivers need to be installed for the graphics to work properly? On official Acer page there are only drivers for Win7 and Win8... Update: I have tried installing fglrx but I get the following error (either I don't have libraries or someone didn't make a clean build before release ;) /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function ‘KCL_MEM_AllocLinearAddrInterval’: /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:2124:5: error: implicit declaration of function ‘do_mmap’ [-Werror=implicit-function-declaration] /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:2124:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function ‘kasInitExecutionLevels’: /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: error: ‘cpu_possible_map’ undeclared (first use in this function) /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: note: each undeclared identifier is reported only once for each function it appears in /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: warning: left-hand operand of comma expression has no effect [-Wunused-value] Update 2: After fixing the erros in compilation, ubuntu acts bizarre and unstable (no left icon panel, no upper panel, cannot run any programs, I only see desktop)

  Read the article

• alsa - sound issues on ubuntu 12.04

  - by tam_ubuuser

  i am having an sony E series laptop.i have an HDMI port .at this stage ,i have tested my sound card , which provides audio out on my laptop i.e i could hear songs .my laptop has two sound cards amd 5450 and an intel-hda(alsamixer shows that as s/pdif) . i decided to connect HDMI output to my new HD-TV.but, i could get only visuals on my TV,NO AUDIO OUTPUT ( HDMI cable works fine with win 7).my laptop has two sound cards.but i couldn't switch output to other card.( i don't know ,how to do that) i decided to update alsa. complied the following code in terminal. sudo apt-add-repository ppa:ubuntu-audio-dev/alsa-daily sudo apt-get update sudo apt-get install alsa-hda-dkms then,strangely no login sound, and no audio output on my laptop at all .then, started complied code from step1 sound troubleshooting procedure from offical ubuntu site.then, my speaker icon taskbar disappeared .obivously $aplay -l ,provided output as no soundcards detected . so , i implemented step 4 from that guide, it provides a output of all hardware devices in my laptop. *-multimedia UNCLAIMED description: Audio device product: Cedar HDMI Audio [Radeon HD 5400/6300 Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0.1 bus info: pci@0000:01:00.1 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list configuration: latency=0 resources: memory:f0040000-f0043fff *-multimedia UNCLAIMED description: Audio device product: 5 Series/3400 Series Chipset High Definition Audio vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 05 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f5e00000-f5e03fff that command displayed output name of the two cards . but , still i have no positive output on $aplay -l. so therfore, i think alsa couldn't detect my sound cards . is there solution to this problem? it could be better,if alsa would channel output from multiple sound cards ? how should install and configure alsa such that detects HDMI cable as soon i connect to my HD tv? is it possible to alsa and pluseaudio 2.0 to co-exist, if so how?

  Read the article

• Ubuntu 3D does not work on Dell system with a AMD Radeon HD 6470M

  - by VeeKay

  I am running 64 bit Ubuntu on Dell with 1GB graphic card. I login with "Ubuntu" hoping to see Unity 3d but it doesn't. Unity 2D runs instead. when I type in echo "$DESKTOP_SESSION" it confirms the Unity-2D. I've checked the System info that shows like : The graphics row shows itself as empty. SO I've presumed that the graphic drivers aren't detected and hence I went to Unity- Additional Drivers and installed the fglrx driver that the UI has suggested. Even after installing so, the graphics part in System info details shows nothing and still Unity 2D runs in spite of all the effort. Please help! How can I get my Unity 3D back? Hardware Info Video Card : AMD Radeon™ HD 6470M - 1GB (For ICC) RAM : 6GB (1 X 2GB + 1 X 4GB) 2 DIMM DDR3 1333Mhz OS : 64 bit Ubuntu 11.10 Edit : Output for /usr/lib/nux/unity_support_test -p X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 155 (GLX) Minor opcode of failed request: 19 (X_GLXQueryServerString) Serial number of failed request: 21 Current serial number in output stream: 21

  Read the article

• Recommended formats to store bitmaps in memory?

  - by Geotarget

  I'm working with general purpose image rendering, and high-performance image processing, and so I need to know how to store bitmaps in-memory. (24bpp/32bpp, compressed/raw, etc) I'm not working with 3D graphics or DirectX / OpenGL rendering and so I don't need to use graphics card compatible bitmap formats. My questions: What is the "usual" or "normal" way to store bitmaps in memory? (in C++ engines/projects?) How to store bitmaps for high-performance algorithms, such that read/write times are the fastest? (fixed array? with/without padding? 24-bpp or 32-bpp?) How to store bitmaps for applications handling a lot of bitmap data, to minimize memory usage? (JPEG? or a faster [de]compression algorithm?) Some possible methods: Use a fixed packed 24-bpp or 32-bpp int[] array and simply access pixels using pointer access, all pixels are allocated in one continuous memory chunk (could be 1-10 MB) Use a form of "sparse" data storage so each line of the bitmap is allocated separately, reusing more memory and requiring smaller contiguous memory segments Store bitmaps in its compressed form (PNG, JPG, GIF, etc) and unpack only when its needed, reducing the amount of memory used. Delete the unpacked data if its not used for 10 secs.

  Read the article

• Shader compile log depending on hardware

  - by dreta

  I'm done with the core of my graphics engine and I'm testing it on every platform I can get my hands on. Now, what I noticed is that different drivers return different shader and program compile log content. For example, on my friend's laptop if you successfuly compile a shader then the log is simply empty. However on my PC I get some useful information along with it. So if I compile a vertex shader, I'll get: Vertex shader was successfully compiled to run on hardware. Which isn't that impressive, but is what happens when I compile a program. On my friend's computer the log is empty, since the program compiles. However on my own computer I get: Vertex shader(s) linked, fragment shader(s) linked. Which is awesome, because I'm attaching a geometry shader with 0 (I have a geometry shader file with trash, so it doesn't compile and the pointer is set to 0), and the compiler just tells me which shaders linked. Now it got me thinking, if I was going to buy a graphics card, is there a way for me to get the information about whether or not I'll get this "extended" compile information? Maybe it's vendor specific? Now I don't expect an answer TBH, this seems a bit obscure, but maybe somebody has any experience with this and could post it.

  Read the article

• Which powerful laptop, with UK keyboard and 8gb ram

  - by RobinL

  I've been searching high and low for high spec laptops compatible with Ubuntu. The lack of coherent information on the topic is high (considering the number of people who apparently want a good laptop with an OS operating system). So I thought you may have some advice. My requirements: a) has = 8Gb ram b) is compatible with Ubuntu c) has a UK keyboard and charger d) does not cost the Earth Which would you go for? Does anyone have good experience with high-end laptops running Ubuntu? So here's some background research: Samsung Series 7 looks great, but has various problems on Ubuntu, including: poor battery life, touchpad does not work, graphics card not fully supported and sucks power when it does (see [here] and [here], for example). Other options on the [wish list] include: the sensible [Acer] (possibly n.1 choice, but not sure about graphics card compatibility or battery), a nice looking [HP Pavilion dv6-6c56ea], which also has incompatibility issues (see [here] and [here] and check ubuntuforums) And another [Acer] which may be best due to its simplicity and cheapness. Other sub-questions: didn't Dell offer Ubuntu support for decent laptops (above 6Gb ram their offerings are scarce); what about pre-installed options such as those provided by System76? If it weren't for the UK keyboard and charger, I'd probably go for this [amazing-looking] [machine]. Many thanks for any advice, P.s. Apologies for lack of hyperlinks; I'm a noob so only allowed 2 :( All 10 links are available here though for the interested reader :) Robin

  Read the article

• Can't access computer

  - by Pudica

  I'm running Ubuntu 14.04 on an Intel NUC and it won't boot! The last successful boot was earlier today but now each time I try it gets stuck on the Grub menu where it prompts for memory check etc. This is not a dual boot system, so this screen shouldn't ever appear, and it never has before. It's GRUB version 2.02~beta2-9, which is a little disconcerting, as I'm on the stable sources. Unfortunately the keyboard (I've tried 2 keyboards just in case) is not responding at this point in the boot process, so I can't select the "Ubuntu" menu option in Grub. The keyboard works during the bios stage, so I can configure it to boot from USB, and I tried a flash drive with 14.04 on it. The flash drive works in my laptop but is completely ignored by the NUC (I tried all 3 USB ports!). It seems that I have no way of getting into the machine at all! The Intel support site was my first option, but the site is down. I expect it's a long shot, but if anyone has any ideas I'd be very grateful.

  Read the article

• Ubuntu 12.04 fresh install wont boot up

  - by user147220

  im running ubuntu 12.04 and it refuses to boot up. the screen will come on for a second, the mosue will appear, then itll go black again all inside about 3 seconds. i let it just do that for a while and eventually a window popped up saying i had a display issue. I didn't have a mouse but there was a button saying "ok" at the bottom that i couldnt click on. i hit enter, got through that screen, now im looking at another that says "What would you like to do?" - run in low-graphics mode for just one session - reconfigure graphics - troubleshoot the error - exit to console login then two buttons, cancel, and ok. I dont have a mouse and its not letting me navigate between these options with tab. firstly, if i make it through these windows will it get me into the computer so i can try and fix whats going on? also, whats going on here? also, how can i click on these buttons without the use of tab or a mouse?

  Read the article

• Ubuntu 13.04 can only work in recovery mode

  - by zhangyangyu

  I have just updated my 12.10 to 13.04. Everything is updated. But I can only boot to a black screen. I mean after the GRUB interface and purple screen. And I can hear the voice of the password interface. But it is only the black screen. It all works OK in 12.10. But it can work in the recovery mode. I mean go into the recovery mode and choose resume. And then everything is OK. But when loading kernel, the screen is dirty. I don't know why and I have Googled a lot. But no resolutions works. My graphics card is Intel GMA HD 4000, tested as VESA: Intel® Sandybridge/Ivybridge Graphics. I have been trapped in this for a whole day. I do need help. Hope someone can help me. By the way, the kernel is 3.8.0-19 if it helps.

  Read the article

• II7 integrated mode MVC deploy 404 not found on "non-Index" actions

  - by majkinetor

  Hello. Once deployed parts of my web-application stop working. Index-es on each controller do work, other then that yields 404. I understand that nothing particular should be done in integrated mode. I don't know how to proceed with troubleshooting. Some info: App is using default app pool set to integrated mode. WebApp is done in net framework 3.5. I use default routing model. Along web.config in root there is web.config in /View folder referencing HttpNotFoundHandler. OS is Windows Server 2008. Any help is appreciated. Thx.

  Read the article

• Booting from integrated RAID controller when another RAID controller is installed in a PCIe slot

  - by Antony Scott

  I have a GA MA785GT UD3H motherboard with Windows Server 2008 R2 installed on a RAID1 using the on-board RAID controller. I have now installed a RocketRaid 2680 controller and set up a RAID5 for all my data to be stored on. Unfortunately I now cannot boot from the RAID1 anymore, the PC is trying to boot from the RAID5! Does anyone have any experience of this motherboard / RAID controller combination?

  Read the article

• Disable integrated client certificate validation in IIS7?

  - by danford

  We have an IIS 7 hosted site that requires client certificates (two-way ssl). Unfortunately, I don't have access to the trusted certificate store on the host machines, and so I was forced to write a custom http module to verify the certificates. My module never gets a chance to do the authentication, however, because IIS doesn't recognize the certificates and responds with a 403.7 error. How do I turn off client certificate validation, while still requiring clients to provide them?

  Read the article

• Integrated Windows Authentication with Chrome and FireFox

  - by Jaap

  I have a webapplication which uses claims based authentication. The STS is ADFS 2.0. When I am in the intranet and use IE, IWA is used and no login dialog appears. When I am on the internet zone, the Forms based authentication of ADFS is used. Just what I want. Chrome and FireFox are also working as expected when I am in the internet zone. But when I am in the intranet zone, both come with a login dialog, instead of using IWA. And supplying my credentials in that dialog does not work, it keeps repeating the dialog. Any hints? UPDATE: Did about an hour searching on the internet before I asked this question. But after asking it I did just another search giving the answer :-), matter of finding the correct keywords. Here the answer: http://stackoverflow.com/questions/5724377/mvc3-site-using-azure-acs-adfs-continually-prompts-for-credentials-when-using

  Read the article

• Enabling Hyper-V Integrated Services Time Sync Services versus Internet Time Synchronization

  - by cpuguru

  Should I deselect the "Synchronize with an Internet Time Server" checkbox under the VM's "Date and Time - Internet Time Settings" tab if the "Time Synchronization Service" for a Hyper-V-based Virtual Machine is enabled? One of the Integration Services that Hyper-V provides is the Time Synchronization Service, which can be enabled/disabled by going to a VM's Settings-Integration Services setting in the Management section. I believe this is checked by default. When you install a Windows Server 2008 OS in a VM on the Hyper-V server, it comes with the "Synchronize with an Internet Time Server" option set, pointing to "time.windows.com". I'd think that if the parent Hyper-V server is set to one time server, and the child VM is pointing to a different time server, there would be a momentary blip if the two are not spot on with their times when the synchronization services run. So the question is, which time sync service should I use? I'm assuming not both. And what is the advantage of one over the other? Note: This question assumes that the machines are not joined to a domain. If they were, the machines would also try to update their time against the domain controller with the primary domain controller role too, right? Thanks!

  Read the article

• Windows 2003 Active Directory Integrated DNS zone not registering non-domain computers

  - by Jeff Willener

  I'm not a networking guy by all means, I'm just a developer who dabbles enough to get into trouble and I'm there. So bear with me... :) At my office I have a Windows 2003 Domain Controller which also services DNS. On the domain I have a handful of computers and other misc. equipment/toys. For the DNS I only created a Forward Lookup Zone for my domain (mydomain.com). I run a lot of VM's so generally I have everything on the domain, however some of those VM's are not and only in a 'Workgroup'. I also have another laptop which belongs to another domain (otherdomain.com) which is here 100% but I use it for other purposes and has to belong to the otherdomain.com. With all that said, I have two questions: I have found any computer not on mydomain.com does not register it's IP address even though 'Register this connections address in DNS' is set to in the 'Advanced TCP/IP Settings' for the nic. Where have I messed this up? On the laptop which is registered on otherdomain.com, when I do a nslookup for a computer on mydomain.com (e.g. nslookup devbox1) it appends otherdomain.com as the suffix (e.g. queries devbox1.otherdomain.com). Same thing occurs if I use the fully qualified name. In the 'Advanced TCP/IP Settings' for that nic, I can 'Append these DNS suffixes' of mydomain.com but I fear that will hose my DNS lookups when I VPN to otherdomain.com. So what is the correct approach to resolve this issue? Do I add both mydomain.com and otherdomain.com in that order?

  Read the article

• "Integrated" VMs (As opposed to "Sandboxed")

  - by sabof

  It is common for virtual machines to be sandboxes, their interaction with the host OS being limited to the absolutely necessary. Are there any projects that would try to integrate VMs (specifically Virtual Box) with their host OS (specifically Ubuntu on Windows host, but I'd be curious of other combinations as well)? Things like opening all files with a certain extension in either the host or the guest. Possibly other nice things I haven't thought of.

  Read the article

• AD-Integrated DNS failure: "Access was Denied"

  - by goldPseudo

  I have a single Windows 2008 R2 server configured as a domain controller with Active Directory Domain Services and DNS Server. The DNS Server was recently uninstalled and reinstalled in an attempt to fix a (possibly unrelated) problem; the event log was previously flooded with errors (#4000, "The DNS Server was unable to open Active Directory...") which reinstalling did not fix. However, while before it was at least showing and resolving names from the local network (slowly), now it's showing nothing at all. (The original error started with a #4015 error "The DNS server has encountered a critical error from the Active Directory," followed by a long string of #4000 and a few #4004. This may have been caused when a new DNS name was recently added, but I can't be sure of the timing.) Attempting to manage the DNS through Administrative Tools > DNS brings up an error: The server SERVERNAME could not be contacted. The error was: Access was denied. Would you like to add it anyway? Selecting yes just puts a SERVERNAME item on the list, but with all the configuration options grayed out. I attempted editing my hosts file as per this post but to no avail. Running dcdiag, it does identify the home server properly, but fails right away testing connectivity with: Starting test: Connectivity The host blahblahblahyaddayaddayadda could not be resolved to an IP address. Check the DNS server, DHCP, server name, etc. Got error while checking LDAP and RPC connectivity. Please check your firewall settings. ......................... SERVERNAME failed test Connectivity Adding the blahblahblahyaddayaddayadda address to hosts (pointing at 127.0.0.1), the connectivity test succeeded but it didn't seem to solve the fundamental problem (Access was denied) so I hashed it out again. Primary DNS server is properly pointing at 127.0.0.1 according to ipconfig /all. And the DNS server is forwarding requests to external addresses properly (if slowly), but the resolving of local network names is borked. The DNS database itself is small enough that I am (grudgingly) able to rebuild it if need be, but the DNS Server doesn't seem willing to let me work with (or around) it at all. (and yes before you ask there are no system backups available) Where do I go from here? As requested, my (slightly obfuscated) dcdiag output: Directory Server Diagnosis Performing initial setup: Trying to find home server... Home Server = bulgogi * Identified AD Forest. Done gathering initial info. Doing initial required tests Testing server: Obfuscated\BULGOGI Starting test: Connectivity The host a-whole-lot-of-numbers._msdcs.obfuscated.address could not be resolved to an IP address. Check the DNS server, DHCP, server name, etc. Got error while checking LDAP and RPC connectivity. Please check your firewall settings. ......................... BULGOGI failed test Connectivity Doing primary tests Testing server: Obfuscated\BULGOGI Skipping all tests, because server BULGOGI is not responding to directory service requests. Running partition tests on : ForestDnsZones Starting test: CheckSDRefDom ......................... ForestDnsZones passed test CheckSDRefDom Starting test: CrossRefValidation ......................... ForestDnsZones passed test CrossRefValidation Running partition tests on : DomainDnsZones Starting test: CheckSDRefDom ......................... DomainDnsZones passed test CheckSDRefDom Starting test: CrossRefValidation ......................... DomainDnsZones passed test CrossRefValidation Running partition tests on : Schema Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Running partition tests on : Configuration Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Running partition tests on : obfuscated Starting test: CheckSDRefDom ......................... obfuscated passed test CheckSDRefDom Starting test: CrossRefValidation ......................... obfuscated passed test CrossRefValidation Running enterprise tests on : obfuscated.address Starting test: LocatorCheck ......................... obfuscated.address passed test LocatorCheck Starting test: Intersite ......................... obfuscated.address passed test Intersite And my hosts file (minus the hashed lines for brevity): 127.0.0.1 localhost ::1 localhost And, for the sake of completion, here's selected chunks of my netstat -a -n output: TCP 0.0.0.0:88 0.0.0.0:0 LISTENING TCP 0.0.0.0:135 0.0.0.0:0 LISTENING TCP 0.0.0.0:389 0.0.0.0:0 LISTENING TCP 0.0.0.0:445 0.0.0.0:0 LISTENING TCP 0.0.0.0:464 0.0.0.0:0 LISTENING TCP 0.0.0.0:593 0.0.0.0:0 LISTENING TCP 0.0.0.0:636 0.0.0.0:0 LISTENING TCP 0.0.0.0:3268 0.0.0.0:0 LISTENING TCP 0.0.0.0:3269 0.0.0.0:0 LISTENING TCP 0.0.0.0:3389 0.0.0.0:0 LISTENING TCP 0.0.0.0:9389 0.0.0.0:0 LISTENING TCP 0.0.0.0:47001 0.0.0.0:0 LISTENING TCP 0.0.0.0:49152 0.0.0.0:0 LISTENING TCP 0.0.0.0:49153 0.0.0.0:0 LISTENING TCP 0.0.0.0:49154 0.0.0.0:0 LISTENING TCP 0.0.0.0:49155 0.0.0.0:0 LISTENING TCP 0.0.0.0:49157 0.0.0.0:0 LISTENING TCP 0.0.0.0:49158 0.0.0.0:0 LISTENING TCP 0.0.0.0:49164 0.0.0.0:0 LISTENING TCP 0.0.0.0:49178 0.0.0.0:0 LISTENING TCP 0.0.0.0:49179 0.0.0.0:0 LISTENING TCP 0.0.0.0:50480 0.0.0.0:0 LISTENING TCP 127.0.0.1:53 0.0.0.0:0 LISTENING TCP 192.168.12.127:53 0.0.0.0:0 LISTENING TCP 192.168.12.127:139 0.0.0.0:0 LISTENING TCP 192.168.12.127:445 192.168.12.50:51118 ESTABLISHED TCP 192.168.12.127:3389 192.168.12.4:33579 ESTABLISHED TCP 192.168.12.127:3389 192.168.12.100:1115 ESTABLISHED TCP 192.168.12.127:50784 192.168.12.50:49174 ESTABLISHED <snip ipv6> UDP 0.0.0.0:123 *:* UDP 0.0.0.0:500 *:* UDP 0.0.0.0:1645 *:* UDP 0.0.0.0:1645 *:* UDP 0.0.0.0:1646 *:* UDP 0.0.0.0:1646 *:* UDP 0.0.0.0:1812 *:* UDP 0.0.0.0:1812 *:* UDP 0.0.0.0:1813 *:* UDP 0.0.0.0:1813 *:* UDP 0.0.0.0:4500 *:* UDP 0.0.0.0:5355 *:* UDP 0.0.0.0:59638 *:* <snip a few thousand lines> UDP 0.0.0.0:62140 *:* UDP 127.0.0.1:53 *:* UDP 127.0.0.1:49540 *:* UDP 127.0.0.1:49541 *:* UDP 127.0.0.1:53655 *:* UDP 127.0.0.1:54946 *:* UDP 127.0.0.1:58345 *:* UDP 127.0.0.1:63352 *:* UDP 127.0.0.1:63728 *:* UDP 127.0.0.1:63729 *:* UDP 127.0.0.1:64215 *:* UDP 127.0.0.1:64646 *:* UDP 192.168.12.127:53 *:* UDP 192.168.12.127:67 *:* UDP 192.168.12.127:68 *:* UDP 192.168.12.127:88 *:* UDP 192.168.12.127:137 *:* UDP 192.168.12.127:138 *:* UDP 192.168.12.127:389 *:* UDP 192.168.12.127:464 *:* UDP 192.168.12.127:2535 *:* <snip ipv6 again>

  Read the article

• Apache Reverse proxy for intranet and other integrated application on intranet

  - by user1433448

  I'm trying to configure a reverse proxy (ssl) with apache 2.2 in Debian Squeeze, but I have some problems, specially with some path absolute and with https I'll try to detail what I have made and what I'm trying to configure I have a server Debian Squeeze with apache2.2 + mod_proxy_html with: # apt-get install libapache2-mod-proxy-html libxml2-dev # a2enmod proxy # a2enmod proxy_http # a2enmod proxy_html # a2enmod headers After that I have configured a virtual host with: reverse_proxy_ssl.conf I'm trying to configure to allow access of our intranet from internet with a reverse proxy (apache that is located in DMZ). With this configuration domain.com/intranet works correctly and we can access to intranet, but we have one problem when from domain.com/intranet we need to use another internal application that is called from intranet with absolute path ( https://192.168.10.25/application/) and from internet appears that try to access with internal ip, and this link es incorrect from external site We only need to access from intranet to multiple internal application that are in external server and we like to restrict to minimal access from internet. All the application that are in the smae server of intranet are working. The second problem is with https and reverse proxy in our firewall appears some errors with packets (not valid packets), and with https seems to work. What can I do to solve this problems (absolute path and ssl problem) Thanks

  Read the article

• Integrated Help - Merged Help Indexes

  - by Rob Sanders

  If anyone has had more than a couple of Microsoft tools or products installed (or a local install of the MSDN library) side by side, you might have noticed that opening help (hitting F1) or opening, say, SQL Server Books Online causes the help indexes to be re-indexed - this is usually after installing a new product or tool. This can be a really, really time consuming exercise! Does anyone know a way to prevent or opt out of having combined help indexes? At best, even just preventing the reindexing at all?

  Read the article

< Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >